stereoMatrixControlDialog::stereoMatrixControlDialog(
stereoMatrixControls * _controls ) :
EffectControlDialog( _controls )
{
setFixedSize( 160, 185 );
setAutoFillBackground( true );
QPalette pal;
pal.setBrush( backgroundRole(),
PLUGIN_NAME::getIconPixmap( "artwork" ) );
setPalette( pal );
Knob * llKnob = new Knob( knobBright_26, this );
llKnob->setModel( &_controls->m_llModel );
llKnob->setHintText( tr( "Left to Left Vol:" ) , "" );
llKnob->move( 10, 79 );
Knob * lrKnob = new Knob( knobBright_26, this );
lrKnob->setModel( &_controls->m_lrModel );
lrKnob->setHintText( tr( "Left to Right Vol:" ) , "" );
lrKnob->move( 48, 79 );
Knob * rlKnob = new Knob( knobBright_26, this );
rlKnob->setModel( &_controls->m_rlModel );
rlKnob->setHintText( tr( "Right to Left Vol:" ) , "" );
rlKnob->move( 85, 79 );
Knob * rrKnob = new Knob( knobBright_26, this );
rrKnob->setModel( &_controls->m_rrModel );
rrKnob->setHintText( tr( "Right to Right Vol:" ) , "" );
rrKnob->move( 123, 79 );
}
stereoEnhancerControlDialog::stereoEnhancerControlDialog(
stereoEnhancerControls * _controls ) :
EffectControlDialog( _controls )
{
QHBoxLayout * l = new QHBoxLayout( this );
Knob * widthKnob = new Knob( knobBright_26, this );
widthKnob->setModel( &_controls->m_widthModel );
widthKnob->setLabel( tr( "WIDE" ) );
widthKnob->setHintText( tr( "Width:" ) , "samples" );
l->addWidget( widthKnob );
this->setLayout(l);
}
BassBoosterControlDialog::BassBoosterControlDialog( BassBoosterControls* controls ) :
EffectControlDialog( controls )
{
setAutoFillBackground( true );
QPalette pal;
pal.setBrush( backgroundRole(), PLUGIN_NAME::getIconPixmap( "artwork" ) );
setPalette( pal );
setFixedSize( 120, 104 );
QVBoxLayout * tl = new QVBoxLayout( this );
tl->addSpacing( 30 );
QHBoxLayout * l = new QHBoxLayout;
Knob * freqKnob = new Knob( knobBright_26, this);
freqKnob->setModel( &controls->m_freqModel );
freqKnob->setLabel( tr( "FREQ" ) );
freqKnob->setHintText( tr( "Frequency:" ) + " ", "Hz" );
Knob * gainKnob = new Knob( knobBright_26, this );
gainKnob->setModel( &controls->m_gainModel );
gainKnob->setLabel( tr( "GAIN" ) );
gainKnob->setHintText( tr( "Gain:" ) + " ", "" );
Knob * ratioKnob = new Knob( knobBright_26, this );
ratioKnob->setModel( &controls->m_ratioModel );
ratioKnob->setLabel( tr( "RATIO" ) );
ratioKnob->setHintText( tr( "Ratio:" ) + " ", "" );
l->addWidget( freqKnob );
l->addWidget( gainKnob );
l->addWidget( ratioKnob );
tl->addLayout( l );
setLayout( tl );
}
EqControlsDialog::EqControlsDialog( EqControls *controls ) :
EffectControlDialog( controls ),
m_controls( controls )
{
setAutoFillBackground( true );
QPalette pal;
pal.setBrush( backgroundRole(), PLUGIN_NAME::getIconPixmap( "EqLayout1BG" ) );
setPalette( pal );
setFixedSize( 500, 500 );
QGridLayout *mainLayout = new QGridLayout( this );
EqSpectrumView *inSpec = new EqSpectrumView( &controls->m_inFftBands, this );
mainLayout->addWidget( inSpec, 0, 1, 1, 8 );
inSpec->setColor( QColor( 238, 154, 120, 80 ) );
EqSpectrumView *outSpec = new EqSpectrumView( &controls->m_outFftBands, this );
outSpec->setColor( QColor( 145, 205, 22, 80 ) );
mainLayout->addWidget( outSpec, 0, 1, 1, 8 );
m_parameterWidget = new EqParameterWidget( this , controls );
mainLayout->addWidget( m_parameterWidget, 0, 1, 1, 8 );
setBand( 0, &controls->m_hpActiveModel, &controls->m_hpFeqModel, &controls->m_hpResModel, 0, QColor(255 ,255, 255), tr( "HP" ) ,0,0, &controls->m_hp12Model, &controls->m_hp24Model, &controls->m_hp48Model,0,0,0);
setBand( 1, &controls->m_lowShelfActiveModel, &controls->m_lowShelfFreqModel, &controls->m_lowShelfResModel, &controls->m_lowShelfGainModel, QColor(255 ,255, 255), tr( "Low Shelf" ), &controls->m_lowShelfPeakL , &controls->m_lowShelfPeakR,0,0,0,0,0,0 );
setBand( 2, &controls->m_para1ActiveModel, &controls->m_para1FreqModel, &controls->m_para1BwModel, &controls->m_para1GainModel, QColor(255 ,255, 255), tr( "Peak 1" ), &controls->m_para1PeakL, &controls->m_para1PeakR,0,0,0,0,0,0 );
setBand( 3, &controls->m_para2ActiveModel, &controls->m_para2FreqModel, &controls->m_para2BwModel, &controls->m_para2GainModel, QColor(255 ,255, 255), tr( "Peak 2" ), &controls->m_para2PeakL, &controls->m_para2PeakR,0,0,0,0,0,0 );
setBand( 4, &controls->m_para3ActiveModel, &controls->m_para3FreqModel, &controls->m_para3BwModel, &controls->m_para3GainModel, QColor(255 ,255, 255), tr( "Peak 3" ), &controls->m_para3PeakL, &controls->m_para3PeakR,0,0,0,0,0,0 );
setBand( 5, &controls->m_para4ActiveModel, &controls->m_para4FreqModel, &controls->m_para4BwModel, &controls->m_para4GainModel, QColor(255 ,255, 255), tr( "Peak 4" ), &controls->m_para4PeakL, &controls->m_para4PeakR,0,0,0,0,0,0 );
setBand( 6, &controls->m_highShelfActiveModel, &controls->m_highShelfFreqModel, &controls->m_highShelfResModel, &controls->m_highShelfGainModel, QColor(255 ,255, 255), tr( "High Shelf" ), &controls->m_highShelfPeakL, &controls->m_highShelfPeakR,0,0,0,0,0,0 );
setBand( 7, &controls->m_lpActiveModel, &controls->m_lpFreqModel, &controls->m_lpResModel, 0, QColor(255 ,255, 255), tr( "LP" ) ,0,0,0,0,0, &controls->m_lp12Model, &controls->m_lp24Model, &controls->m_lp48Model);
EqFader *inGainFader = new EqFader( &controls->m_inGainModel, tr( "In Gain" ), this, &controls->m_inPeakL, &controls->m_inPeakR );
mainLayout->addWidget( inGainFader, 0, 0 );
inGainFader->setDisplayConversion( false );
inGainFader->setHintText( tr( "Gain" ), "dBFS");
EqFader *outGainFader = new EqFader( &controls->m_outGainModel, tr( "Out Gain" ), this, &controls->m_outPeakL, &controls->m_outPeakR );
mainLayout->addWidget( outGainFader, 0, 9 );
outGainFader->setDisplayConversion( false );
outGainFader->setHintText( tr( "Gain" ), "dBFS" );
// Gain Fader for each Filter exepts the pass filter
for( int i = 1; i < m_parameterWidget->bandCount() - 1; i++ )
{
EqFader *gainFader = new EqFader( m_parameterWidget->getBandModels( i )->gain, tr( "" ), this,
m_parameterWidget->getBandModels( i )->peakL, m_parameterWidget->getBandModels( i )->peakR );
mainLayout->addWidget( gainFader, 2, i+1 );
mainLayout->setAlignment( gainFader, Qt::AlignHCenter );
gainFader->setMinimumHeight(80);
gainFader->resize(gainFader->width() , 80);
gainFader->setDisplayConversion( false );
gainFader->setHintText( tr( "Gain") , "dB");
}
//Control Button and Knobs for each Band
for( int i = 0; i < m_parameterWidget->bandCount() ; i++ )
{
Knob *resKnob = new Knob( knobBright_26, this );
mainLayout->setRowMinimumHeight( 4, 33 );
mainLayout->addWidget( resKnob, 5, i + 1 );
mainLayout->setAlignment( resKnob, Qt::AlignHCenter );
resKnob->setVolumeKnob(false);
resKnob->setModel( m_parameterWidget->getBandModels( i )->res );
if(i > 1 && i < 6) { resKnob->setHintText( tr( "Bandwidth: " ) , tr( " Octave" ) ); }
else { resKnob->setHintText( tr( "Resonance : " ) , "" ); }
Knob *freqKnob = new Knob( knobBright_26, this );
mainLayout->addWidget( freqKnob, 3, i+1 );
mainLayout->setAlignment( freqKnob, Qt::AlignHCenter );
freqKnob->setVolumeKnob( false );
freqKnob->setModel( m_parameterWidget->getBandModels( i )->freq );
freqKnob->setHintText( tr( "Frequency:" ), "Hz" );
// adds the Number Active buttons
PixmapButton *activeNumButton = new PixmapButton( this, NULL );
activeNumButton->setCheckable(true);
activeNumButton->setModel( m_parameterWidget->getBandModels( i )->active );
QString iconActiveFileName = "bandLabel" + QString::number(i+1) + "on";
QString iconInactiveFileName = "bandLabel" + QString::number(i+1);
activeNumButton->setActiveGraphic( PLUGIN_NAME::getIconPixmap( iconActiveFileName.toLatin1() ) );
activeNumButton->setInactiveGraphic( PLUGIN_NAME::getIconPixmap( iconInactiveFileName.toLatin1() ) );
mainLayout->addWidget( activeNumButton, 1, i+1 );
mainLayout->setAlignment( activeNumButton, Qt::AlignHCenter );
activeNumButton->setModel( m_parameterWidget->getBandModels( i )->active );
// adds the symbols active buttons
PixmapButton *activeButton = new PixmapButton( this, NULL );
activeButton->setCheckable(true);
activeButton->setModel( m_parameterWidget->getBandModels( i )->active );
switch (i)
{
case 0:
activeButton->setActiveGraphic( PLUGIN_NAME::getIconPixmap( "ActiveHP" ) );
activeButton->setInactiveGraphic( PLUGIN_NAME::getIconPixmap( "ActiveHPoff" ) );
break;
case 1:
activeButton->setActiveGraphic( PLUGIN_NAME::getIconPixmap( "ActiveLS" ) );
activeButton->setInactiveGraphic( PLUGIN_NAME::getIconPixmap( "ActiveLSoff" ) );
break;
case 6:
activeButton->setActiveGraphic( PLUGIN_NAME::getIconPixmap( "ActiveHS" ) );
activeButton->setInactiveGraphic( PLUGIN_NAME::getIconPixmap( "ActiveHSoff" ) );
break;
case 7:
activeButton->setActiveGraphic( PLUGIN_NAME::getIconPixmap( "ActiveLP" ) );
activeButton->setInactiveGraphic( PLUGIN_NAME::getIconPixmap( "ActiveLPoff" ) );
break;
default:
activeButton->setActiveGraphic( PLUGIN_NAME::getIconPixmap( "ActivePeak" ) );
activeButton->setInactiveGraphic( PLUGIN_NAME::getIconPixmap( "ActivePeakoff" ) );
}
mainLayout->addWidget( activeButton, 7, i+1 );
mainLayout->setAlignment( activeButton, Qt::AlignHCenter);
activeButton->setModel( m_parameterWidget->getBandModels( i )->active );
// Connects the knobs, Faders and buttons with the curve graphic
QObject::connect( m_parameterWidget->getBandModels( i )->freq , SIGNAL( dataChanged() ), m_parameterWidget, SLOT ( updateHandle() ) );
if ( m_parameterWidget->getBandModels( i )->gain ) QObject::connect( m_parameterWidget->getBandModels( i )->gain, SIGNAL( dataChanged() ), m_parameterWidget, SLOT ( updateHandle() ));
QObject::connect( m_parameterWidget->getBandModels( i )->res, SIGNAL( dataChanged() ), m_parameterWidget , SLOT ( updateHandle() ) );
QObject::connect( m_parameterWidget->getBandModels( i )->active, SIGNAL( dataChanged() ), m_parameterWidget , SLOT ( updateHandle() ) );
m_parameterWidget->changeHandle( i );
}
// adds the buttons for Spectrum analyser on/off
PixmapButton *inSpecB = new PixmapButton(this, NULL);
inSpecB->setActiveGraphic( PLUGIN_NAME::getIconPixmap( "ActiveAnalyse" ) );
inSpecB->setInactiveGraphic( PLUGIN_NAME::getIconPixmap( "ActiveAnalyseoff" ) );
inSpecB->setCheckable( true );
inSpecB->setModel( &controls->m_analyseInModel );
PixmapButton *outSpecB = new PixmapButton(this, NULL);
outSpecB->setActiveGraphic( PLUGIN_NAME::getIconPixmap( "ActiveAnalyse" ) );
outSpecB->setInactiveGraphic( PLUGIN_NAME::getIconPixmap( "ActiveAnalyseoff" ) );
outSpecB->setCheckable( true );
outSpecB->setModel( &controls->m_analyseOutModel );
mainLayout->addWidget( inSpecB, 1, 0 );
mainLayout->addWidget( outSpecB, 1, 9 );
mainLayout->setAlignment( inSpecB, Qt::AlignHCenter );
mainLayout->setAlignment( outSpecB, Qt::AlignHCenter );
//hp filter type
PixmapButton *hp12Button = new PixmapButton( this , NULL );
hp12Button->setModel( m_parameterWidget->getBandModels( 0 )->hp12 );
hp12Button->setActiveGraphic( PLUGIN_NAME::getIconPixmap( "12dB" ) );
hp12Button->setInactiveGraphic( PLUGIN_NAME::getIconPixmap( "12dBoff" ) );
PixmapButton *hp24Button = new PixmapButton( this , NULL );
hp24Button->setModel(m_parameterWidget->getBandModels( 0 )->hp24 );
hp24Button->setActiveGraphic( PLUGIN_NAME::getIconPixmap( "24dB" ) );
hp24Button->setInactiveGraphic( PLUGIN_NAME::getIconPixmap( "24dBoff" ) );
PixmapButton *hp48Button = new PixmapButton( this , NULL );
hp48Button->setModel( m_parameterWidget->getBandModels(0)->hp48 );
hp48Button->setActiveGraphic( PLUGIN_NAME::getIconPixmap( "48dB" ) );
hp48Button->setInactiveGraphic( PLUGIN_NAME::getIconPixmap( "48dBoff" ) );
//LP filter type
PixmapButton *lp12Button = new PixmapButton( this , NULL );
mainLayout->addWidget( lp12Button, 2, 1 );
lp12Button->setModel( m_parameterWidget->getBandModels( 7 )->lp12 );
lp12Button->setActiveGraphic( PLUGIN_NAME::getIconPixmap( "12dB" ) );
lp12Button->setInactiveGraphic( PLUGIN_NAME::getIconPixmap( "12dBoff" ) );
PixmapButton *lp24Button = new PixmapButton( this , NULL );
lp24Button->setModel( m_parameterWidget->getBandModels( 7 )->lp24 );
lp24Button->setActiveGraphic( PLUGIN_NAME::getIconPixmap( "24dB" ) );
lp24Button->setInactiveGraphic( PLUGIN_NAME::getIconPixmap( "24dBoff" ) );
PixmapButton *lp48Button = new PixmapButton( this , NULL );
lp48Button->setModel( m_parameterWidget->getBandModels( 7 )->lp48 );
lp48Button->setActiveGraphic( PLUGIN_NAME::getIconPixmap( "48dB" ) );
lp48Button->setInactiveGraphic( PLUGIN_NAME::getIconPixmap( "48dBoff" ) );
// the curve has to change its appearance
connect( m_parameterWidget->getBandModels( 0 )->hp12 , SIGNAL ( dataChanged() ), m_parameterWidget, SLOT( updateHandle()));
connect( m_parameterWidget->getBandModels( 0 )->hp24 , SIGNAL ( dataChanged() ), m_parameterWidget, SLOT( updateHandle()));
connect( m_parameterWidget->getBandModels( 0 )->hp48 , SIGNAL ( dataChanged() ), m_parameterWidget, SLOT( updateHandle()));
connect( m_parameterWidget->getBandModels( 7 )->lp12 , SIGNAL ( dataChanged() ), m_parameterWidget, SLOT( updateHandle()));
connect( m_parameterWidget->getBandModels( 7 )->lp24 , SIGNAL ( dataChanged() ), m_parameterWidget, SLOT( updateHandle()));
connect( m_parameterWidget->getBandModels( 7 )->lp48 , SIGNAL ( dataChanged() ), m_parameterWidget, SLOT( updateHandle()));
QVBoxLayout *hpGrpBtnLayout = new QVBoxLayout;
hpGrpBtnLayout->addWidget( hp12Button );
hpGrpBtnLayout->addWidget( hp24Button );
hpGrpBtnLayout->addWidget( hp48Button );
QVBoxLayout *lpGrpBtnLayout = new QVBoxLayout;
lpGrpBtnLayout->addWidget( lp12Button );
lpGrpBtnLayout->addWidget( lp24Button );
lpGrpBtnLayout->addWidget( lp48Button );
mainLayout->addLayout( hpGrpBtnLayout, 2, 1, Qt::AlignCenter );
mainLayout->addLayout( lpGrpBtnLayout, 2, 8, Qt::AlignCenter );
automatableButtonGroup *lpBtnGrp = new automatableButtonGroup(this,tr ( "lp grp" ) );
lpBtnGrp->addButton( lp12Button );
lpBtnGrp->addButton( lp24Button );
lpBtnGrp->addButton( lp48Button );
lpBtnGrp->setModel( &m_controls->m_lpTypeModel, false);
automatableButtonGroup *hpBtnGrp = new automatableButtonGroup( this, tr( "hp grp" ) );
hpBtnGrp->addButton( hp12Button );
hpBtnGrp->addButton( hp24Button );
hpBtnGrp->addButton( hp48Button );
hpBtnGrp->setModel( &m_controls->m_hpTypeModel,false);
mainLayout->setAlignment( Qt::AlignTop );
for (int i = 0 ; i < 10; i++)
{
mainLayout->setColumnMinimumWidth(i, 50);
}
mainLayout->setAlignment( inGainFader, Qt::AlignHCenter );
mainLayout->setAlignment( outGainFader, Qt::AlignHCenter );
mainLayout->setRowMinimumHeight( 0,200 );
mainLayout->setRowMinimumHeight( 1, 40 );
mainLayout->setRowMinimumHeight(6,15);
mainLayout->setContentsMargins( 0, 11, 0, 0 );
mainLayout->setAlignment(inSpec, Qt::AlignCenter );
mainLayout->setAlignment(outSpec, Qt::AlignCenter );
QLabel *freqLabel = new QLabel( this );
freqLabel->setText("- " + tr( "Frequency")+ " -" );
freqLabel->move( 217 , 377 );
QLabel *resLabel1 = new QLabel( this );
resLabel1->setText("- " + tr( "Resonance")+ " -" );
resLabel1->move( 62 , 444 );
QLabel *resLabel2 = new QLabel( this );
resLabel2->setText("- " + tr( "Resonance")+ " -" );
resLabel2->move( 365 , 444 );
QLabel *bandWidthLabel = new QLabel( this );
bandWidthLabel->setText("- " + tr( "Bandwidth")+ " -" );
bandWidthLabel->move( 215 , 444 );
setLayout(mainLayout);
}
void organicInstrumentView::modelChanged()
{
organicInstrument * oi = castModel<organicInstrument>();
const float y=91.0f;
const float rowHeight = 26.0f;
const float x=53.0f;
const float colWidth = 24.0f;
m_numOscillators = oi->m_numOscillators;
m_fx1Knob->setModel( &oi->m_fx1Model );
m_volKnob->setModel( &oi->m_volModel );
if( m_oscKnobs != NULL )
{
delete[] m_oscKnobs;
}
m_oscKnobs = new OscillatorKnobs[ m_numOscillators ];
// Create knobs, now that we know how many to make
for( int i = 0; i < m_numOscillators; ++i )
{
// setup harmonic knob
Knob * harmKnob = new organicKnob( this );
harmKnob->move( x + i * colWidth, y - rowHeight );
harmKnob->setObjectName( "harmKnob" );
connect( &oi->m_osc[i]->m_harmModel, SIGNAL( dataChanged() ),
this, SLOT( updateKnobHint() ) );
// setup waveform-knob
Knob * oscKnob = new organicKnob( this );
oscKnob->move( x + i * colWidth, y );
connect( &oi->m_osc[i]->m_oscModel, SIGNAL( dataChanged() ),
this, SLOT( updateKnobHint() ) );
oscKnob->setHintText( tr( "Osc %1 waveform:" ).arg( i + 1 ) + " ", QString() );
// setup volume-knob
Knob * volKnob = new Knob( knobStyled, this );
volKnob->setVolumeKnob( true );
volKnob->move( x + i * colWidth, y + rowHeight*1 );
volKnob->setFixedSize( 21, 21 );
volKnob->setHintText( tr( "Osc %1 volume:" ).arg(
i + 1 ) + " ", "%" );
// setup panning-knob
Knob * panKnob = new organicKnob( this );
panKnob->move( x + i * colWidth, y + rowHeight*2 );
panKnob->setHintText( tr("Osc %1 panning:").arg(
i + 1 ) + " ", "" );
// setup knob for fine-detuning
Knob * detuneKnob = new organicKnob( this );
detuneKnob->move( x + i * colWidth, y + rowHeight*3 );
detuneKnob->setHintText( tr( "Osc %1 stereo detuning" ).arg( i + 1 )
+ " ", " " +
tr( "cents" ) );
m_oscKnobs[i] = OscillatorKnobs( harmKnob, volKnob, oscKnob, panKnob, detuneKnob );
// Attach to models
m_oscKnobs[i].m_harmKnob->setModel( &oi->m_osc[i]->m_harmModel );
m_oscKnobs[i].m_volKnob->setModel( &oi->m_osc[i]->m_volModel );
m_oscKnobs[i].m_oscKnob->setModel( &oi->m_osc[i]->m_oscModel );
m_oscKnobs[i].m_panKnob->setModel( &oi->m_osc[i]->m_panModel );
m_oscKnobs[i].m_detuneKnob->setModel( &oi->m_osc[i]->m_detuneModel );
}
updateKnobHint();
}
TripleOscillatorView::TripleOscillatorView( Instrument * _instrument,
QWidget * _parent ) :
InstrumentView( _instrument, _parent )
{
setAutoFillBackground( true );
QPalette pal;
pal.setBrush( backgroundRole(),
PLUGIN_NAME::getIconPixmap( "artwork" ) );
setPalette( pal );
const int mod_x = 66;
const int mod1_y = 58;
const int mod2_y = 75;
const int osc_y = 109;
const int osc_h = 52;
// TODO: clean rewrite using layouts and all that...
PixmapButton * pm_osc1_btn = new PixmapButton( this, NULL );
pm_osc1_btn->move( mod_x, mod1_y );
pm_osc1_btn->setActiveGraphic( PLUGIN_NAME::getIconPixmap(
"pm_active" ) );
pm_osc1_btn->setInactiveGraphic( PLUGIN_NAME::getIconPixmap(
"pm_inactive" ) );
ToolTip::add( pm_osc1_btn, tr( "Use phase modulation for "
"modulating oscillator 1 with "
"oscillator 2" ) );
PixmapButton * am_osc1_btn = new PixmapButton( this, NULL );
am_osc1_btn->move( mod_x + 35, mod1_y );
am_osc1_btn->setActiveGraphic( PLUGIN_NAME::getIconPixmap(
"am_active" ) );
am_osc1_btn->setInactiveGraphic( PLUGIN_NAME::getIconPixmap(
"am_inactive" ) );
ToolTip::add( am_osc1_btn, tr( "Use amplitude modulation for "
"modulating oscillator 1 with "
"oscillator 2" ) );
PixmapButton * mix_osc1_btn = new PixmapButton( this, NULL );
mix_osc1_btn->move( mod_x + 70, mod1_y );
mix_osc1_btn->setActiveGraphic( PLUGIN_NAME::getIconPixmap(
"mix_active" ) );
mix_osc1_btn->setInactiveGraphic( PLUGIN_NAME::getIconPixmap(
"mix_inactive" ) );
ToolTip::add( mix_osc1_btn, tr( "Mix output of oscillator 1 & 2" ) );
PixmapButton * sync_osc1_btn = new PixmapButton( this, NULL );
sync_osc1_btn->move( mod_x + 105, mod1_y );
sync_osc1_btn->setActiveGraphic( PLUGIN_NAME::getIconPixmap(
"sync_active" ) );
sync_osc1_btn->setInactiveGraphic( PLUGIN_NAME::getIconPixmap(
"sync_inactive" ) );
ToolTip::add( sync_osc1_btn, tr( "Synchronize oscillator 1 with "
"oscillator 2" ) );
PixmapButton * fm_osc1_btn = new PixmapButton( this, NULL );
fm_osc1_btn->move( mod_x + 140, mod1_y );
fm_osc1_btn->setActiveGraphic( PLUGIN_NAME::getIconPixmap(
"fm_active" ) );
fm_osc1_btn->setInactiveGraphic( PLUGIN_NAME::getIconPixmap(
"fm_inactive" ) );
ToolTip::add( fm_osc1_btn, tr( "Use frequency modulation for "
"modulating oscillator 1 with "
"oscillator 2" ) );
m_mod1BtnGrp = new automatableButtonGroup( this );
m_mod1BtnGrp->addButton( pm_osc1_btn );
m_mod1BtnGrp->addButton( am_osc1_btn );
m_mod1BtnGrp->addButton( mix_osc1_btn );
m_mod1BtnGrp->addButton( sync_osc1_btn );
m_mod1BtnGrp->addButton( fm_osc1_btn );
PixmapButton * pm_osc2_btn = new PixmapButton( this, NULL );
pm_osc2_btn->move( mod_x, mod2_y );
pm_osc2_btn->setActiveGraphic( PLUGIN_NAME::getIconPixmap(
"pm_active" ) );
pm_osc2_btn->setInactiveGraphic( PLUGIN_NAME::getIconPixmap(
"pm_inactive" ) );
ToolTip::add( pm_osc2_btn, tr( "Use phase modulation for "
"modulating oscillator 2 with "
"oscillator 3" ) );
PixmapButton * am_osc2_btn = new PixmapButton( this, NULL );
am_osc2_btn->move( mod_x + 35, mod2_y );
am_osc2_btn->setActiveGraphic( PLUGIN_NAME::getIconPixmap(
"am_active" ) );
am_osc2_btn->setInactiveGraphic( PLUGIN_NAME::getIconPixmap(
"am_inactive" ) );
ToolTip::add( am_osc2_btn, tr( "Use amplitude modulation for "
"modulating oscillator 2 with "
"oscillator 3" ) );
PixmapButton * mix_osc2_btn = new PixmapButton( this, NULL );
mix_osc2_btn->move( mod_x + 70, mod2_y );
mix_osc2_btn->setActiveGraphic( PLUGIN_NAME::getIconPixmap(
"mix_active" ) );
mix_osc2_btn->setInactiveGraphic( PLUGIN_NAME::getIconPixmap(
"mix_inactive" ) );
ToolTip::add( mix_osc2_btn, tr("Mix output of oscillator 2 & 3" ) );
PixmapButton * sync_osc2_btn = new PixmapButton( this, NULL );
sync_osc2_btn->move( mod_x + 105, mod2_y );
sync_osc2_btn->setActiveGraphic( PLUGIN_NAME::getIconPixmap(
"sync_active" ) );
sync_osc2_btn->setInactiveGraphic( PLUGIN_NAME::getIconPixmap(
"sync_inactive" ) );
ToolTip::add( sync_osc2_btn, tr( "Synchronize oscillator 2 with "
"oscillator 3" ) );
PixmapButton * fm_osc2_btn = new PixmapButton( this, NULL );
fm_osc2_btn->move( mod_x + 140, mod2_y );
fm_osc2_btn->setActiveGraphic( PLUGIN_NAME::getIconPixmap(
"fm_active" ) );
fm_osc2_btn->setInactiveGraphic( PLUGIN_NAME::getIconPixmap(
"fm_inactive" ) );
ToolTip::add( fm_osc2_btn, tr( "Use frequency modulation for "
"modulating oscillator 2 with "
"oscillator 3" ) );
m_mod2BtnGrp = new automatableButtonGroup( this );
m_mod2BtnGrp->addButton( pm_osc2_btn );
m_mod2BtnGrp->addButton( am_osc2_btn );
m_mod2BtnGrp->addButton( mix_osc2_btn );
m_mod2BtnGrp->addButton( sync_osc2_btn );
m_mod2BtnGrp->addButton( fm_osc2_btn );
for( int i = 0; i < NUM_OF_OSCILLATORS; ++i )
{
int knob_y = osc_y + i * osc_h;
// setup volume-knob
Knob * vk = new Knob( knobStyled, this );
vk->setVolumeKnob( true );
vk->setFixedSize( 28, 35 );
vk->move( 6, knob_y );
vk->setHintText( tr( "Osc %1 volume:" ).arg(
i+1 ), "%" );
vk->setWhatsThis(
tr( "With this knob you can set the volume of "
"oscillator %1. When setting a value of 0 the "
"oscillator is turned off. Otherwise you can "
"hear the oscillator as loud as you set it "
"here.").arg( i+1 ) );
// setup panning-knob
Knob * pk = new TripleOscKnob( this );
pk->move( 35, knob_y );
pk->setHintText( tr("Osc %1 panning:").arg( i + 1 ), "" );
pk->setWhatsThis(
tr( "With this knob you can set the panning of the "
"oscillator %1. A value of -100 means 100% "
"left and a value of 100 moves oscillator-"
"output right.").arg( i+1 ) );
// setup coarse-knob
Knob * ck = new TripleOscKnob( this );
ck->move( 82, knob_y );
ck->setHintText( tr( "Osc %1 coarse detuning:" ).arg( i + 1 )
, " " + tr( "semitones" ) );
ck->setWhatsThis(
tr( "With this knob you can set the coarse detuning of "
"oscillator %1. You can detune the oscillator "
"24 semitones (2 octaves) up and down. This is "
"useful for creating sounds with a chord." ).
arg( i + 1 ) );
// setup knob for left fine-detuning
Knob * flk = new TripleOscKnob( this );
flk->move( 111, knob_y );
flk->setHintText( tr( "Osc %1 fine detuning left:" ).
arg( i + 1 ),
" " + tr( "cents" ) );
flk->setWhatsThis(
tr( "With this knob you can set the fine detuning of "
"oscillator %1 for the left channel. The fine-"
"detuning is ranged between -100 cents and "
"+100 cents. This is useful for creating "
"\"fat\" sounds." ).arg( i + 1 ) );
// setup knob for right fine-detuning
Knob * frk = new TripleOscKnob( this );
frk->move( 140, knob_y );
frk->setHintText( tr( "Osc %1 fine detuning right:" ).
arg( i + 1 ),
" " + tr( "cents" ) );
frk->setWhatsThis(
tr( "With this knob you can set the fine detuning of "
"oscillator %1 for the right channel. The "
"fine-detuning is ranged between -100 cents "
"and +100 cents. This is useful for creating "
"\"fat\" sounds." ).arg( i+1 ) );
// setup phase-offset-knob
Knob * pok = new TripleOscKnob( this );
pok->move( 188, knob_y );
pok->setHintText( tr( "Osc %1 phase-offset:" ).
arg( i + 1 ),
" " + tr( "degrees" ) );
pok->setWhatsThis(
tr( "With this knob you can set the phase-offset of "
"oscillator %1. That means you can move the "
"point within an oscillation where the "
"oscillator begins to oscillate. For example "
"if you have a sine-wave and have a phase-"
"offset of 180 degrees the wave will first go "
"down. It's the same with a square-wave."
).arg( i+1 ) );
// setup stereo-phase-detuning-knob
Knob * spdk = new TripleOscKnob( this );
spdk->move( 217, knob_y );
spdk->setHintText( tr("Osc %1 stereo phase-detuning:" ).
arg( i + 1 ),
" " + tr( "degrees" ) );
spdk->setWhatsThis(
tr( "With this knob you can set the stereo phase-"
"detuning of oscillator %1. The stereo phase-"
"detuning specifies the size of the difference "
"between the phase-offset of left and right "
"channel. This is very good for creating wide "
"stereo sounds." ).arg( i+1 ) );
int btn_y = 96 + i * osc_h;
PixmapButton * sin_wave_btn = new PixmapButton( this, NULL );
sin_wave_btn->move( 128, btn_y );
sin_wave_btn->setActiveGraphic( PLUGIN_NAME::getIconPixmap(
"sin_shape_active" ) );
sin_wave_btn->setInactiveGraphic( PLUGIN_NAME::getIconPixmap(
"sin_shape_inactive" ) );
ToolTip::add( sin_wave_btn,
tr( "Use a sine-wave for "
"current oscillator." ) );
PixmapButton * triangle_wave_btn =
new PixmapButton( this, NULL );
triangle_wave_btn->move( 143, btn_y );
triangle_wave_btn->setActiveGraphic(
PLUGIN_NAME::getIconPixmap( "triangle_shape_active" ) );
triangle_wave_btn->setInactiveGraphic(
PLUGIN_NAME::getIconPixmap( "triangle_shape_inactive" ) );
ToolTip::add( triangle_wave_btn,
tr( "Use a triangle-wave "
"for current oscillator." ) );
PixmapButton * saw_wave_btn = new PixmapButton( this, NULL );
saw_wave_btn->move( 158, btn_y );
saw_wave_btn->setActiveGraphic( PLUGIN_NAME::getIconPixmap(
"saw_shape_active" ) );
saw_wave_btn->setInactiveGraphic( PLUGIN_NAME::getIconPixmap(
"saw_shape_inactive" ) );
ToolTip::add( saw_wave_btn,
tr( "Use a saw-wave for "
"current oscillator." ) );
PixmapButton * sqr_wave_btn = new PixmapButton( this, NULL );
sqr_wave_btn->move( 173, btn_y );
sqr_wave_btn->setActiveGraphic( PLUGIN_NAME::getIconPixmap(
"square_shape_active" ) );
sqr_wave_btn->setInactiveGraphic( PLUGIN_NAME::getIconPixmap(
"square_shape_inactive" ) );
ToolTip::add( sqr_wave_btn,
tr( "Use a square-wave for "
"current oscillator." ) );
PixmapButton * moog_saw_wave_btn =
new PixmapButton( this, NULL );
moog_saw_wave_btn->move( 188, btn_y );
moog_saw_wave_btn->setActiveGraphic(
PLUGIN_NAME::getIconPixmap( "moog_saw_shape_active" ) );
moog_saw_wave_btn->setInactiveGraphic(
PLUGIN_NAME::getIconPixmap( "moog_saw_shape_inactive" ) );
ToolTip::add( moog_saw_wave_btn,
tr( "Use a moog-like saw-wave "
"for current oscillator." ) );
PixmapButton * exp_wave_btn = new PixmapButton( this, NULL );
exp_wave_btn->move( 203, btn_y );
exp_wave_btn->setActiveGraphic( PLUGIN_NAME::getIconPixmap(
"exp_shape_active" ) );
exp_wave_btn->setInactiveGraphic( PLUGIN_NAME::getIconPixmap(
"exp_shape_inactive" ) );
ToolTip::add( exp_wave_btn,
tr( "Use an exponential "
"wave for current oscillator." ) );
PixmapButton * white_noise_btn = new PixmapButton( this, NULL );
white_noise_btn->move( 218, btn_y );
white_noise_btn->setActiveGraphic(
PLUGIN_NAME::getIconPixmap( "white_noise_shape_active" ) );
white_noise_btn->setInactiveGraphic(
PLUGIN_NAME::getIconPixmap( "white_noise_shape_inactive" ) );
ToolTip::add( white_noise_btn,
tr( "Use white-noise for "
"current oscillator." ) );
PixmapButton * uwb = new PixmapButton( this, NULL );
uwb->move( 233, btn_y );
uwb->setActiveGraphic( PLUGIN_NAME::getIconPixmap(
"usr_shape_active" ) );
uwb->setInactiveGraphic( PLUGIN_NAME::getIconPixmap(
"usr_shape_inactive" ) );
ToolTip::add( uwb, tr( "Use a user-defined "
"waveform for current oscillator." ) );
automatableButtonGroup * wsbg =
new automatableButtonGroup( this );
wsbg->addButton( sin_wave_btn );
wsbg->addButton( triangle_wave_btn );
wsbg->addButton( saw_wave_btn );
wsbg->addButton( sqr_wave_btn );
wsbg->addButton( moog_saw_wave_btn );
wsbg->addButton( exp_wave_btn );
wsbg->addButton( white_noise_btn );
wsbg->addButton( uwb );
m_oscKnobs[i] = OscillatorKnobs( vk, pk, ck, flk, frk, pok,
spdk, uwb, wsbg );
}
}
BitcrushControlDialog::BitcrushControlDialog( BitcrushControls * controls ) :
EffectControlDialog( controls )
{
setAutoFillBackground( true );
QPalette pal;
pal.setBrush( backgroundRole(), PLUGIN_NAME::getIconPixmap( "artwork" ) );
setPalette( pal );
setFixedSize( 215, 120 );
// labels
QLabel * inLabel = new QLabel( tr( "IN" ), this );
inLabel->move( 12, 10);
QLabel * outLabel = new QLabel( tr( "OUT" ), this );
outLabel->move( 176, 10 );
// input knobs
Knob * inGain = new Knob( knobBright_26, this );
inGain->move( 12, 25 );
inGain->setModel( & controls->m_inGain );
inGain->setLabel( tr( "GAIN" ) );
inGain->setHintText( tr( "Input Gain:" ) + " ", " dBV" );
Knob * inNoise = new Knob( knobBright_26, this );
inNoise->move( 12, 70 );
inNoise->setModel( & controls->m_inNoise );
inNoise->setLabel( tr( "NOIS" ) );
inNoise->setHintText( tr( "Input Noise:" ) + " ", "%" );
// output knobs
Knob * outGain = new Knob( knobBright_26, this );
outGain->move( 176, 25 );
outGain->setModel( & controls->m_outGain );
outGain->setLabel( tr( "GAIN" ) );
outGain->setHintText( tr( "Output Gain:" ) + " ", " dBV" );
Knob * outClip = new Knob( knobBright_26, this );
outClip->move( 176, 70 );
outClip->setModel( & controls->m_outClip );
outClip->setLabel( tr( "CLIP" ) );
outClip->setHintText( tr( "Output Clip:" ) + " ", "%" );
// leds
LedCheckBox * rateEnabled = new LedCheckBox( tr( "Rate" ), this, tr( "Rate Enabled" ), LedCheckBox::Green );
rateEnabled->move( 50, 30 );
rateEnabled->setModel( & controls->m_rateEnabled );
ToolTip::add( rateEnabled, tr( "Enable samplerate-crushing" ) );
LedCheckBox * depthEnabled = new LedCheckBox( tr( "Depth" ), this, tr( "Depth Enabled" ), LedCheckBox::Green );
depthEnabled->move( 50, 80 );
depthEnabled->setModel( & controls->m_depthEnabled );
ToolTip::add( depthEnabled, tr( "Enable bitdepth-crushing" ) );
// rate crushing knobs
Knob * rate = new Knob( knobBright_26, this );
rate->move( 100, 20 );
rate->setModel( & controls->m_rate );
rate->setLabel( tr( "Rate" ) );
rate->setHintText( tr( "Sample rate:" ) + " ", " Hz" );
Knob * stereoDiff = new Knob( knobBright_26, this );
stereoDiff->move( 140, 20 );
stereoDiff->setModel( & controls->m_stereoDiff );
stereoDiff->setLabel( tr( "STD" ) );
stereoDiff->setHintText( tr( "Stereo difference:" ) + " ", "%" );
// depth crushing knob
Knob * levels = new Knob( knobBright_26, this );
levels->move( 140, 70 );
levels->setModel( & controls->m_levels );
levels->setLabel( tr( "Levels" ) );
levels->setHintText( tr( "Levels:" ) + " ", "" );
}
MultitapEchoControlDialog::MultitapEchoControlDialog( MultitapEchoControls * controls ) :
EffectControlDialog( controls )
{
setAutoFillBackground( true );
QPalette pal;
pal.setBrush( backgroundRole(), PLUGIN_NAME::getIconPixmap( "artwork" ) );
setPalette( pal );
setFixedSize( 245, 300 );
// graph widgets
Graph * ampGraph = new Graph( this, Graph::BarStyle, 204, 105 );
Graph * lpGraph = new Graph( this, Graph::BarStyle, 204, 105 );
ampGraph->move( 30, 10 );
lpGraph->move( 30, 125 );
ampGraph->setModel( & controls->m_ampGraph );
lpGraph->setModel( & controls->m_lpGraph );
pal = QPalette();
pal.setBrush( backgroundRole(), PLUGIN_NAME::getIconPixmap("graph_bg") );
ampGraph->setAutoFillBackground( true );
ampGraph->setPalette( pal );
ampGraph->setGraphColor( QColor( 11, 213, 86) );
ampGraph -> setMaximumSize( 204, 105 );
lpGraph->setAutoFillBackground( true );
lpGraph->setPalette( pal );
lpGraph->setGraphColor( QColor( 0, 200, 187) );
lpGraph -> setMaximumSize( 204, 105 );
// steps spinbox
LcdSpinBox * steps = new LcdSpinBox( 2, this, "Steps" );
steps->move( 20, 245 );
steps->setModel( & controls->m_steps );
// knobs
TempoSyncKnob * stepLength = new TempoSyncKnob( knobBright_26, this );
stepLength->move( 100, 245 );
stepLength->setModel( & controls->m_stepLength );
stepLength->setLabel( tr( "Length" ) );
stepLength->setHintText( tr( "Step length:" ) , " ms" );
Knob * dryGain = new Knob( knobBright_26, this );
dryGain->move( 150, 245 );
dryGain->setModel( & controls->m_dryGain );
dryGain->setLabel( tr( "Dry" ) );
dryGain->setHintText( tr( "Dry Gain:" ) , " dBFS" );
Knob * stages = new Knob( knobBright_26, this );
stages->move( 200, 245 );
stages->setModel( & controls->m_stages );
stages->setLabel( tr( "Stages" ) );
stages->setHintText( tr( "Lowpass stages:" ) , "x" );
// switch led
LedCheckBox * swapInputs = new LedCheckBox( "Swap inputs", this, tr( "Swap inputs" ), LedCheckBox::Green );
swapInputs->move( 20, 275 );
swapInputs->setModel( & controls->m_swapInputs );
ToolTip::add( swapInputs, tr( "Swap left and right input channel for reflections" ) );
}
BitcrushControlDialog::BitcrushControlDialog( BitcrushControls * controls ) :
EffectControlDialog( controls )
{
setAutoFillBackground( true );
QPalette pal;
pal.setBrush( backgroundRole(), PLUGIN_NAME::getIconPixmap( "artwork" ) );
setPalette( pal );
setFixedSize( 181, 128 );
// labels
QLabel * inLabel = new QLabel( tr( "IN" ), this );
inLabel->move( 24, 15 );
QLabel * outLabel = new QLabel( tr( "OUT" ), this );
outLabel->move( 139, 15 );
// input knobs
Knob * inGain = new Knob( knobBright_26, this );
inGain->move( 16, 32 );
inGain->setModel( & controls->m_inGain );
inGain->setLabel( tr( "GAIN" ) );
inGain->setHintText( tr( "Input gain:" ) , " dBFS" );
Knob * inNoise = new Knob( knobBright_26, this );
inNoise->move( 14, 76 );
inNoise->setModel( & controls->m_inNoise );
inNoise->setLabel( tr( "NOISE" ) );
inNoise->setHintText( tr( "Input noise:" ) , "%" );
// output knobs
Knob * outGain = new Knob( knobBright_26, this );
outGain->move( 138, 32 );
outGain->setModel( & controls->m_outGain );
outGain->setLabel( tr( "GAIN" ) );
outGain->setHintText( tr( "Output gain:" ) , " dBFS" );
Knob * outClip = new Knob( knobBright_26, this );
outClip->move( 138, 76 );
outClip->setModel( & controls->m_outClip );
outClip->setLabel( tr( "CLIP" ) );
outClip->setHintText( tr( "Output clip:" ) , "%" );
// leds
LedCheckBox * rateEnabled = new LedCheckBox( "", this, tr( "Rate enabled" ), LedCheckBox::Green );
rateEnabled->move( 64, 14 );
rateEnabled->setModel( & controls->m_rateEnabled );
ToolTip::add( rateEnabled, tr( "Enable sample-rate crushing" ) );
LedCheckBox * depthEnabled = new LedCheckBox( "", this, tr( "Depth enabled" ), LedCheckBox::Green );
depthEnabled->move( 101, 14 );
depthEnabled->setModel( & controls->m_depthEnabled );
ToolTip::add( depthEnabled, tr( "Enable bit-depth crushing" ) );
// rate crushing knobs
Knob * rate = new Knob( knobBright_26, this );
rate->move( 59, 32 );
rate->setModel( & controls->m_rate );
rate->setLabel( tr( "FREQ" ) );
rate->setHintText( tr( "Sample rate:" ) , " Hz" );
Knob * stereoDiff = new Knob( knobBright_26, this );
stereoDiff->move( 72, 76 );
stereoDiff->setModel( & controls->m_stereoDiff );
stereoDiff->setLabel( tr( "STEREO" ) );
stereoDiff->setHintText( tr( "Stereo difference:" ) , "%" );
// depth crushing knob
Knob * levels = new Knob( knobBright_26, this );
levels->move( 92, 32 );
levels->setModel( & controls->m_levels );
levels->setLabel( tr( "QUANT" ) );
levels->setHintText( tr( "Levels:" ) , "" );
}
