Beispiel #1
0
int
MHL7Compare::findSegment(HL7MSG* mMsg, const MString& segName)
{
  if (!mMsg)
    return 0;

  if (!segName.size())
    return 0;
  
  char *seg = segName.strData();

  int iResult = HL7FindSegm(mMsg, seg);
  delete [] seg;
  if ((iResult != HL7_OK) && (iResult != HL7_END_OF_STRUCT))
  {
    cout << "HL7Compare: Cannot find the segment: " << segName << endl;
    cout << HL7ErrTxt(mMsg, iResult) << endl;
    return 0;
  }

  if (iResult == HL7_END_OF_STRUCT)
    return 0;

  return 1;
}
Beispiel #2
0
void
MHL7Msg::setValue(const char* segment, int field, int component,
		  const MString& value)
{
  char *s = value.strData();
  this->setValue(segment, field, component, s);
  delete [] s;
};
Beispiel #3
0
int
MHL7Factory::copyFields(MHL7Msg& source, HL7MSG* target)
{
  // copy all the fields from the current segment of the source to the target
  int numFlds = source.numberOfFields();
  for (int inx = 1; inx <= numFlds; inx++)
  {
    MString v = source.getValue(inx, 0);
    char* vCpy = v.strData();
    ::HL7PutFld(target, vCpy, inx);
    delete []vCpy;
  }
  return 0;
}
Beispiel #4
0
MString
MCGIParser::getValue(const MString& key)
{
  if (ptrLlist == 0)
    return "";

  llist* p = (llist*) ptrLlist;
  char* keyChar = key.strData();

  char* c = cgi_val(*p, keyChar);
  if (c == 0)
    c = "";

  delete []keyChar;
  return c;
}
Beispiel #5
0
int
MHL7DomainXlate::translateDomain(MHL7Msg& hl7, HL7_MAP* m,
			         const MDomainObject& o)
{
  MString key;

  for (key = m->attribute; key != ""; key = (++m)->attribute) {
    MString v = o.value(key);
    char* val = v.strData(); 
    hl7.setValue(m->segment,
     		 m->field,
		 m->component,
                 val);
    delete [] val;
  }
  return 0;
}
Beispiel #6
0
CONDITION
MLStorageCommitment::handleNActionDataSet(DUL_PRESENTATIONCONTEXT* ctx,
					  MSG_N_ACTION_REQ** message,
					  MSG_N_ACTION_RESP* response,
					  DUL_ASSOCIATESERVICEPARAMETERS* params,
					  MString& directoryName)
{
  MLogClient logClient;
  logClient.log(MLogClient::MLOG_VERBOSE,
		params->callingAPTitle,
		"MLStorageCommitment::handleNActionDataSet",
		__LINE__,
		"Storage Commit N-Action dataset received");

  MFileOperations f;

  MString apTitle(params->callingAPTitle);
  MString fullPath = mLogDir + "/" + apTitle;

  f.createDirectory(fullPath);

  MString s = f.uniqueFile(fullPath, "opn");
  char* s1 = s.strData();

  ::DCM_WriteFile(&(*message)->actionInformation,
		  DCM_ORDERLITTLEENDIAN,
		  s1);

  logClient.log(MLogClient::MLOG_VERBOSE,
		params->callingAPTitle,
		"MLStorageCommitment::handleNActionDataSet",
		__LINE__,
		"Storage Commit N-Action dataset written to " + s);

  delete []s1;

  response->dataSetType = DCM_CMDDATANULL;
  response->conditionalFields = 0;
  response->status = MSG_K_SUCCESS;
  return SRV_NORMAL;
}
Beispiel #7
0
// Private methods below
int
MHL7Factory::copyFields(HL7_COPY_MAP* copyMap, MHL7Msg& source, HL7MSG* target)
{
  while (copyMap->sourceSegment[0] != '\0') {
    MString v = source.getValue(copyMap->sourceSegment,
				copyMap->sourceField,
				0);
    char* cPtr = 0;

    ::HL7FirstSegm(target, &cPtr);
    ::HL7FindSegm(target, copyMap->targetSegment);

    char* vCpy = v.strData();

    ::HL7PutFld(target, vCpy, copyMap->targetField);

    delete []vCpy;
    copyMap++;
  }
  return 0;
}
Beispiel #8
0
int
MCGIParser::parse(const MString& buffer)
{
  if (ptrLlist != 0) {
    llist* p = (llist*) ptrLlist;
    ::list_clear(p);
    delete p;
  }

  llist* p1 = new llist;
  ptrLlist = p1;
  ::list_create(p1);
  char* c = buffer.strData();
  int status = ::parse_CGI_encoded(p1, c);
  delete []c;

  if (status >= 0)
    return 0;
  else
    return 1;
}
Beispiel #9
0
MSyslogMessage5424::MSyslogMessage5424(int facility, int severity, int version,
	const MString& message,
	const MString& timeStamp,
	const MString& hostName,
	const MString& appName,
	const MString& procID,
	const MString& msgID,
	bool flagUTF8) :
  mFacility(facility),
  mSeverity(severity),
  mVersion(version),
  mTimeStamp(timeStamp),
  mHostName(hostName),
  mAppName(appName),
  mProcID(procID),
  mMsgID(msgID),
  mUTF8Flag(flagUTF8),
  mOwnMessage(false)
{
  if (version <= 0) {
    mVersion = 1;
  } else if (version > 999) {
    mVersion = 999;
  }

  if (message == "") {
    mMessage = 0;
    mUTF8Flag = true;
    mMessageSize = 3;		// BOM
  } else {
    mMessage = (unsigned char*)message.strData();
    mMessageSize = message.length();
    if (mUTF8Flag) mMessageSize += 3;
  }
  if (mTimeStamp == "") this->computeTimeStamp();
  if (mHostName  == "") this->getHostName();
  if (mAppName   == "") mAppName = "-";
  if (mProcID    == "") mProcID  = "-";
  if (mMsgID     == "") mMsgID   = "-";
}
Beispiel #10
0
void
MHL7Compare::initializeFormat(const MString& fileName)
{
  // read the ini file and add segment/field information in the multimap
  // MSegmentInfo (mSegInfo)

  if (!fileName.size())
    return;

  char* fn = fileName.strData();
  ifstream f(fn);
  delete [] fn;

  char buf[1024];
  char *p;
  MString segName;

  memset(buf, 0, sizeof(buf));

  while (f.getline(buf, sizeof(buf)))
  {
    // ignore comments
    if ((buf[0] == '#') || (buf[0] == ' '))
      continue;

    p = buf;
    if (buf[0] == '[') //found a new section
    {
      // get segment name
      p++;
      char *tmp = strchr(p, ']');
      if (tmp != NULL)
      {
        *tmp = 0;
        segName = p;
        *tmp = ']';
      }
    } // endif
    else if (isdigit(buf[0]))
    {
      // get field specific information
      FIELD_INFO fldInfo;
      // get information on a particular field
      int  fldnum = -1, compnum = -1, subcompnum = -1;
      char num[1024];
      memset(num, 0, sizeof(num));
      int i = 0;
 //   while (*p != 0)
      while (1)
      {
        if (!isdigit(*p)) 
        {
          num[i] = 0;
          if (fldnum < 0)
            fldnum = atoi(num);
          else if (compnum < 0)
            compnum = atoi(num);
          else
            subcompnum = atoi(num);

          if (*p == ';')
            break;
          if (*p == 0)
            break;

          i = 0;
          memset(num, 0, sizeof(num));
        }
        else
        {
          num[i] = *p;
          i++;
        }

        if (*p == '.')
          p++;  // move to the next character
        else if ( !isdigit(*p) )
          break;
        else
          p++;
      } // endwhile

      if ( fldnum >  0 )
        fldInfo.fldNum = fldnum;
      else
        fldInfo.fldNum = 0;
      if (compnum > 0)
        fldInfo.compNum = compnum;
      else
        fldInfo.compNum = 0;
      if (subcompnum > 0)
        fldInfo.subCompNum = subcompnum;
      else
        fldInfo.subCompNum = 0;

    // now that we have complete information about a particular field, we can insert
    if (segName.size())
      mSegInfo.insert (MSegmentInfo::value_type (segName, fldInfo) );

    //reinitialize FIELD_INFO struct
    fldInfo.fldNum = 0;
    fldInfo.compNum = 0;
    fldInfo.subCompNum = 0;
 
    memset(buf, 0, sizeof(buf));

    }  // endif
  }  //endwhile
  
  if (!f.eof())
    cout << "Could Not Read From File" << endl;
}
Beispiel #11
0
CONDITION
MLQueryUPS::handleCFindCommand(DUL_PRESENTATIONCONTEXT* ctx,
			       MSG_C_FIND_REQ** message,
			       MSG_C_FIND_RESP* response,
			       DUL_ASSOCIATESERVICEPARAMETERS* params,
			       const MString& queryLevelString)
{
  MLogClient logClient;
  MString callingAPTitle;

  if (!params) {
    // We have been called by mwlQuery
    callingAPTitle = "mwlQuery()";
  }
  else {
    callingAPTitle = params->callingAPTitle;
  }

  logClient.log(MLogClient::MLOG_VERBOSE,
		callingAPTitle,
		"MLQueryUPS::handleCFindCommand",
		__LINE__,
		"C-Find command received");

  MFileOperations f;
  MDICOMWrapper w((*message)->identifier);

  // Section in braces stores the query in a file
  // in case we want to examine it later for debugging
  {
    char path[] = "logs/ordfil_mwl";

    f.createDirectory("MESA_TARGET", path);

    MString s = f.uniqueFile("MESA_TARGET", path, "qry");
    char* s1 = s.strData();

    ::DCM_WriteFile(&(*message)->identifier,
		    DCM_ORDERLITTLEENDIAN,
		    s1);

    logClient.log(MLogClient::MLOG_VERBOSE,
		  callingAPTitle,
		  "MLQueryUPS::handleCFindCommand",
		  __LINE__,
		  MString("C-Find query stored in ") + s);

    delete []s1;

    w.log(logClient, MLogClient::MLOG_VERBOSE);
  }

  // Add return values to empty sequences
  this->inflateEmptySequences((*message)->identifier);

  //clear the MUPSObjectsVector
  MUPSObjectsVector::iterator mObjIt = mObjectsVector.end();
  for (; mObjIt != mObjectsVector.begin(); mObjIt--) {
    mObjectsVector.pop_back();
  }  

  MDICOMDomainXlate xlate;

  MUPS ups;
//  MActionItemVector aiv;
//  xlate.translateDICOM(w, ups, aiv);
  MUWLScheduledStationNameCodeVector ssnCodeVector;
  xlate.translateDICOM(w, ups, ssnCodeVector);
  mOrderFiller.queryUnifiedWorkList(ups, *this);

  //add logging here to report number of items returned for query
  char rows[64];
  sprintf(rows, "%d", mObjectsVector.size());
  logClient.log(MLogClient::MLOG_VERBOSE,
	    callingAPTitle,
	    "MLQueryUPS::handleCFindCommand",
	    __LINE__,
	    MString("C-Find query returned ") + rows + MString(" work list items"));

  return SRV_NORMAL;
}
Beispiel #12
0
CONDITION
MLMPPS::handleNSetDataSet(DUL_PRESENTATIONCONTEXT* ctx,
			  MSG_N_SET_REQ** message,
			  MSG_N_SET_RESP* response,
			  DUL_ASSOCIATESERVICEPARAMETERS* params,
			  MString& directoryName)
{
  MLogClient logClient;
  logClient.log(MLogClient::MLOG_VERBOSE,
		params->callingAPTitle,
		"MLMPPS::handleNSetDataSet",
		__LINE__,
		"MPPS N-Set dataset received");

  //::DCM_DumpElements(&(*message)->dataSet, 1);

  MFileOperations f;

  MString instanceUID((*message)->instanceUID);

  MString slash("/");
  MString callingAPTitle(params->callingAPTitle);

  MString newDirectory = mStorageDir + slash + params->callingAPTitle
    + slash + instanceUID;

  f.createDirectory(newDirectory);

  f.createDirectory(newDirectory);
  MString s = f.uniqueFile(newDirectory, "set");
  char* s1 = s.strData();

  ::DCM_WriteFile(&(*message)->dataSet,
		  DCM_ORDERLITTLEENDIAN,
		  s1 );

  logClient.log(MLogClient::MLOG_VERBOSE,
		params->callingAPTitle,
		"MLMPPS::handleNSetDataSet",
		__LINE__,
		"MPPS N-Set data set written to " + s);

  char mppsPath[512];
  newDirectory.safeExport(mppsPath, sizeof(mppsPath));
  strcat (mppsPath, "/mpps.dcm"); 

  MPPSAssistant assistant;

  int rslt;

  rslt = assistant.validateNSetDataSet(mppsPath, s1);
  rslt = assistant.mergeNSetDataSet(mppsPath, s1);

  logClient.log(MLogClient::MLOG_VERBOSE,
		params->callingAPTitle,
		"MLMPPS::handleNSetDataSet",
		__LINE__,
		MString("MPPS status updated ") + mppsPath);

  delete [] s1;

  response->dataSetType = DCM_CMDDATANULL;
  response->conditionalFields = 0;
  ::strcpy(response->classUID, (*message)->classUID);
  ::strcpy(response->instanceUID, (*message)->instanceUID);
  response->status = MSG_K_SUCCESS;
  return SRV_NORMAL;
}
void
MLDispatchOrderPlacerJapanese::processInfo(MHL7Msg& message, const MString& event,
                         const MPatient& patient,
                         const MPlacerOrder& placerOrder)
{
  MString orderControl = message.getValue("ORC", 1, 1);

  MLogClient logClient;
  logClient.log(MLogClient::MLOG_VERBOSE,
		"peer",
		"MLDispatchOrderPlacerJapanese::processInfo",
		__LINE__,
		MString("Processing event ")+event+MString(" with Order Control ")+orderControl);

  // There can be only two possibilities of trigger events:
  // O01: Order Message and O02: Order Response
  if (orderControl == "NW")  // new order request
  {
    // should not really receive it
    if (event == "O01") {
      mDatabase->enterOrder(placerOrder);
      // send an OK response
    } else {
      orderError(event, orderControl);
    }
  } else if (orderControl == "OK") {  // order accepted OK
    if (event == "O02") {
      MPatient p(patient);
      MPlacerOrder po(placerOrder);
      // check to see if this order exists in our database
      if (!mDatabase->getOrder(p, po)) {
	logClient.log(MLogClient::MLOG_ERROR,
		"peer",
		"MLDispatchOrderPlacerJapanese::processInfo",
		__LINE__,
		MString("Order Number: ")+placerOrder.placerOrderNumber() +
		 MString(" for patient: ") + patient.patientID() + MString(" does not exist"));

        orderError(event, orderControl);
      }
    } else {
      orderError(event, orderControl);
    }
  } else if (orderControl == "UA") {  // unable to accept order
    if (event == "O02")  {
      MPatient p(patient);
      MPlacerOrder po(placerOrder);
      // check to see if this order exists in our database
      if (!mDatabase->getOrder(p, po)) {
        // update order with order control code "UA"
        mDatabase->updateOrder(placerOrder);
	logClient.log(MLogClient::MLOG_ERROR,
		"peer",
		"MLDispatchOrderPlacerJapanese::processInfo",
		__LINE__,
		MString("Server did not accept order: ")+placerOrder.placerOrderNumber() +
		 MString(" for patient: ") + patient.patientID());
      } else {
	logClient.log(MLogClient::MLOG_ERROR,
		"peer",
		"MLDispatchOrderPlacerJapanese::processInfo",
		__LINE__,
		MString("Order Number: ")+placerOrder.placerOrderNumber() +
		 MString(" for patient: ") + patient.patientID() + MString(" does not exist"));
        orderError(event, orderControl);
      }
    } else {
      orderError(event, orderControl);
    }
  } else if (orderControl == "CA") {  // cancel order request
    // should not really receive it
    // if the order exists, delete it from the database.
    if (event == "O01") {
      MPatient p(patient);
      MPlacerOrder po(placerOrder);
      if (!mDatabase->getOrder(p, po)) {
        mDatabase->cancelOrder(placerOrder);
        // generate response CR
      } else {
        // generate response UC
      }
    }
    else {
      orderError(event, orderControl);
    }
  } else if (orderControl == "OC") {  // order cancelled
    // Filler cancelled the order.  Delete it from the database
    // No reply needed
    if (event == "O01") 
      mDatabase->cancelOrder(placerOrder);
    else
      orderError(event, orderControl);
  } else if (orderControl == "CR") {  // order cancelled as requested
    // Filler cancelled the order.  Now delete it from the database
    if (event == "O02") {
      mDatabase->cancelOrder(placerOrder);
    } else {
      orderError(event, orderControl);
    }
  } else if (orderControl == "UC") { // unable to cancel
    if (event == "O02") {
      MPatient p(patient);
      MPlacerOrder po(placerOrder);
      // check to see if this order exists in our database
      if (!mDatabase->getOrder(p, po)) {
        // update order with order control "UC"
        mDatabase->updateOrder(placerOrder);
	logClient.log(MLogClient::MLOG_ERROR,
		"peer",
		"MLDispatchOrderPlacerJapanese::processInfo",
		__LINE__,
		MString("Server did not cancel order: ")+placerOrder.placerOrderNumber() +
		 MString(" for patient: ") + patient.patientID());
      } else {
	logClient.log(MLogClient::MLOG_ERROR,
		"peer",
		"MLDispatchOrderPlacerJapanese::processInfo",
		__LINE__,
		MString("Order Number: ")+placerOrder.placerOrderNumber() +
		 MString(" for patient: ") + patient.patientID() + MString(" does not exist"));
        orderError(event, orderControl);
      }
    } else {
      orderError(event, orderControl);
    }
  } else if (orderControl == "DC") { // discontinue order request
    logClient.log(MLogClient::MLOG_ERROR,
		"peer",
		"MLDispatchOrderPlacerJapanese::processInfo",
		__LINE__,
		MString("Order Control (DC) not supported"));

    orderError(event, orderControl);
  } else if (orderControl == "OD") { // order discontinued
    logClient.log(MLogClient::MLOG_ERROR,
		"peer",
		"MLDispatchOrderPlacerJapanese::processInfo",
		__LINE__,
		MString("Order Control (OD) not supported"));

    orderError(event, orderControl);
  } else if (orderControl == "UD") { // unable to discontinue
    logClient.log(MLogClient::MLOG_ERROR,
		"peer",
		"MLDispatchOrderPlacerJapanese::processInfo",
		__LINE__,
		MString("Order Control (UD) not supported"));
    orderError(event, orderControl);
  } else if (orderControl == "OD") { // discontinued as requested
    logClient.log(MLogClient::MLOG_ERROR,
		"peer",
		"MLDispatchOrderPlacerJapanese::processInfo",
		__LINE__,
		MString("Order Control (OD) not supported"));

    orderError(event, orderControl);
  } else if (orderControl == "PA") { // parent order
    logClient.log(MLogClient::MLOG_ERROR,
		"peer",
		"MLDispatchOrderPlacerJapanese::processInfo",
		__LINE__,
		MString("Order Control (PA) not supported"));

    orderError(event, orderControl);
  } else if (orderControl == "CH") { // child order
    logClient.log(MLogClient::MLOG_ERROR,
		"peer",
		"MLDispatchOrderPlacerJapanese::processInfo",
		__LINE__,
		MString("Order Control (CH) not supported"));

    orderError(event, orderControl);
  } else if (orderControl == "SC") { // status changed
    // update order.  Since it is a notification, no response needed
    if (event == "O01")  {
      mDatabase->updateOrder(placerOrder);
    } else {
      orderError(event, orderControl);
    }
  } else if (orderControl == "SN") {// send order number
    // Order Filler has entered a new order and assigned it an filler order num
    if (event == "O01") {
      // Assign a placer order number
      MString poNum = getNewPlacerOrderNumber();
      // store in the database
      MPlacerOrder po(placerOrder);
      po.placerOrderNumber(poNum);
      for (int i = po.numOrders()-1; i >= 0; i--) {
        MOrder o = po.order(i);
        o.orderControl("NA");
      }
      mDatabase->enterOrder(po);
      // send a response NA
#if 0
      char* cValue = poNum.strData();
      MString seg = message.firstSegment();
      while(seg != "") {
        if ((seg == "ORC") || (seg == "OBR"))
          message.setValue(2, 0, cValue);
        seg = message.nextSegment();
      }
      delete [] cValue;
#endif
      sendORR(message, "NA", poNum);
    } else {
      orderError(event, orderControl);
    }
  } else if (orderControl == "NA") { // number assigned
    // should not really receive it
    if (event == "O02") {
      // a new filler order number was assigned.  Update tables
      mDatabase->updateOrder(placerOrder);
    } else {
      orderError(event, orderControl);
    }
  } else {
    orderError(event, orderControl);
    logClient.log(MLogClient::MLOG_ERROR,
		"peer",
		"MLDispatchOrderPlacerJapanese::processInfo",
		__LINE__,
		MString("Order Control ") + orderControl + MString(" not supported"));
  }
}
Beispiel #14
0
MHL7Msg*
MHL7Factory::produceORR(MHL7Msg& ormMsg, const MString& orderControl,
	const MString& placerOrderNumber)
{

  HL7MSG* pMsg = ::HL7Alloca(mFlavor);
  if (pMsg == 0) {
    cerr << "Could not allocate HL7 Message" << endl;
    exit(1);
  }

  ::HL7InsSegm(pMsg, "MSH");
  ::HL7PutFld(pMsg, "^~\\&", 2);
  ::HL7PutFld(pMsg, "ORR^O02", 9);
  ::HL7PutFld(pMsg, "xxx", 10);
  ::HL7PutFld(pMsg, "P", 11);
  ::HL7PutFld(pMsg, "2.3.1", 12);

  ::HL7InsSegm(pMsg, "MSA");
  ::HL7PutFld(pMsg, "AA", 1);

  HL7_COPY_MAP m[] = {
    { "MSH", 5, "MSH", 3},     // Sending Application
    { "MSH", 6, "MSH", 4},     // Sending Facility
    { "MSH", 3, "MSH", 5},     // Receiving Application
    { "MSH", 4, "MSH", 6},     // Receiving Application
    { "MSH", 11,"MSA", 2},     // Message Control ID
    { "", 0, "", 0}
  };

  this->copyFields(m, ormMsg, pMsg);

  ormMsg.firstSegment();
  MString seg = ormMsg.nextSegment();
  char* ordCon = orderControl.strData();
  char placerOrderNumberText[100];
  placerOrderNumber.safeExport(placerOrderNumberText,
	sizeof(placerOrderNumberText));

  while(seg != "")
  {
    if ((seg == "PV1") || (seg == "PID")) {
      // ORR message does not contain PID or PV1 segment
      seg = ormMsg.nextSegment();
      continue;
    }

    char* cSeg = seg.strData();
    ::HL7InsSegm(pMsg, cSeg);
    this->copyFields(ormMsg, pMsg);
    delete [] cSeg;

    // if an ORC segment, then insert the order control that the caller wants
    if (seg == "ORC") {
      ::HL7PutFld(pMsg, ordCon, 1);
      if (placerOrderNumber != "") {
	::HL7PutFld(pMsg, placerOrderNumberText, 2);
      }
    } else if (seg == "OBR") {
      if (placerOrderNumber != "") {
	::HL7PutFld(pMsg, placerOrderNumberText, 2);
      }
    }
    seg = ormMsg.nextSegment();
  }

  delete [] ordCon;
  MHL7Msg* returnMsg = new MHL7Msg(pMsg);
  return returnMsg;
}
Beispiel #15
0
CONDITION
MLMPPS::handleNCreateDataSet(DUL_PRESENTATIONCONTEXT* ctx,
			       MSG_N_CREATE_REQ** message,
			       MSG_N_CREATE_RESP* response,
			       DUL_ASSOCIATESERVICEPARAMETERS* params,
			       MString& directoryName)
{
  MLogClient logClient;
  logClient.log(MLogClient::MLOG_VERBOSE,
		params->callingAPTitle,
		"MLMPPS::handleNCreateDataSetCommand",
		__LINE__,
		"MPPS N-Create dataset received");

  //::DCM_DumpElements(&(*message)->dataSet, 1);

  MFileOperations f;

  MString instanceUID((*message)->instanceUID);
  if (instanceUID == "") {
    logClient.log(MLogClient::MLOG_ERROR,
		params->callingAPTitle,
		"MLMPPS::handleNCreateDataSetCommand",
		__LINE__,
		"Zero-length instance UID received with N-Create message");

  }

  MString slash("/");
  MString callingAPTitle(params->callingAPTitle);

  MString newDirectory = mStorageDir + slash + params->callingAPTitle
    + slash + instanceUID;

  f.createDirectory(newDirectory);
  MString s = f.uniqueFile(newDirectory, "crt");

  char* s1 = s.strData();

  ::DCM_WriteFile(&(*message)->dataSet,
		  DCM_ORDERLITTLEENDIAN,
		  s1 );

  logClient.log(MLogClient::MLOG_CONVERSATION,
		params->callingAPTitle,
		"MLMPPS::handleNCreateDataSetCommand",
		__LINE__,
		"N-Create stored in " + s);

  delete [] s1;

  char mppsPath[512];
  newDirectory.safeExport(mppsPath, sizeof(mppsPath));

  strcat (mppsPath, "/mpps.dcm"); 
   ::DCM_WriteFile(&(*message)->dataSet,
 		  DCM_ORDERLITTLEENDIAN,
 		  mppsPath);

  logClient.log(MLogClient::MLOG_CONVERSATION,
		params->callingAPTitle,
		"MLMPPS::handleNCreateDataSetCommand",
		__LINE__,
		MString("MPPS status stored in ") + mppsPath);

  response->dataSetType = DCM_CMDDATANULL;
  response->conditionalFields = 0;
  response->status = MSG_K_SUCCESS;
  return SRV_NORMAL;
}