void initMidiPorts()
{
//TODO: Remove the need for this code
//We should populate the oomMidiPort hash with ports as we create them
for (int i = 0; i < MIDI_PORTS; ++i)
{
MidiPort* port = &midiPorts[i];
///port->setInstrument(genericMidiInstrument);
port->setInstrument(registerMidiInstrument("GM")); // Changed by Tim.
port->syncInfo().setPort(i);
}
}
void MidiDevice::handleStop()
{
// If the device is not in use by a port, don't bother it.
if(_port == -1)
return;
MidiPort* mp = &MusEGlobal::midiPorts[_port];
//---------------------------------------------------
// send midi stop
//---------------------------------------------------
// Don't send if external sync is on. The master, and our sync routing system will take care of that.
if(!MusEGlobal::extSyncFlag.value())
{
// Shall we check open flags? DELETETHIS 4?
//if(!(dev->rwFlags() & 0x1) || !(dev->openFlags() & 1))
//if(!(dev->openFlags() & 1))
// return;
MidiSyncInfo& si = mp->syncInfo();
if(si.MMCOut())
mp->sendMMCStop();
if(si.MRTOut())
{
mp->sendStop();
//DELETETHIS 5?
// Added check of option send continue not start. Hmm, is this required? Seems to make other devices unhappy.
// (Could try now that this is in MidiDevice.)
//if(!si.sendContNotStart())
// mp->sendSongpos(MusEGlobal::audio->tickPos() * 4 / MusEGlobal::config.division);
}
}
//---------------------------------------------------
// Clear all notes and flush out any stuck notes
// which were put directly to the device
//---------------------------------------------------
setStopFlag(true);
for(iMPEvent i = _stuckNotes.begin(); i != _stuckNotes.end(); ++i)
{
MidiPlayEvent ev(*i);
ev.setTime(0); // Immediate processing. TODO Use curFrame?
//ev.setTime(MusEGlobal::audio->midiQueueTimeStamp(ev.time()));
putEvent(ev, MidiDevice::NotLate);
}
_stuckNotes.clear();
//------------------------------------------------------------
// Flush out any track-related playback stuck notes (NOT 'live' notes)
// which were not put directly to the device
//------------------------------------------------------------
for(ciMidiTrack imt = MusEGlobal::song->midis()->begin(); imt != MusEGlobal::song->midis()->end(); ++imt)
{
MPEventList& mel = (*imt)->stuckNotes;
for(iMPEvent i = mel.begin(), i_next = i; i != mel.end(); i = i_next)
{
++i_next;
if((*i).port() != _port)
continue;
MidiPlayEvent ev(*i);
ev.setTime(0); // Immediate processing. TODO Use curFrame?
//ev.setTime(MusEGlobal::audio->midiQueueTimeStamp(ev.time()));
putEvent(ev, MidiDevice::NotLate);
mel.erase(i);
}
}
//---------------------------------------------------
// reset sustain
//---------------------------------------------------
for(int ch = 0; ch < MusECore::MUSE_MIDI_CHANNELS; ++ch)
{
if(mp->hwCtrlState(ch, CTRL_SUSTAIN) == 127)
{
MidiPlayEvent ev(0, _port, ch, ME_CONTROLLER, CTRL_SUSTAIN, 0); // Immediate processing. TODO Use curFrame?
//ev.setTime(MusEGlobal::audio->midiQueueTimeStamp(ev.time()));
putEvent(ev, MidiDevice::NotLate);
}
}
}
void MidiDevice::handleSeek()
{
// If the device is not in use by a port, don't bother it.
if(_port == -1)
return;
MidiPort* mp = &MusEGlobal::midiPorts[_port];
MidiInstrument* instr = mp->instrument();
MidiCtrlValListList* cll = mp->controller();
unsigned pos = MusEGlobal::audio->tickPos();
//---------------------------------------------------
// Send STOP
//---------------------------------------------------
// Don't send if external sync is on. The master, and our sync routing system will take care of that.
if(!MusEGlobal::extSyncFlag.value())
{
if(mp->syncInfo().MRTOut())
{
// Shall we check for device write open flag to see if it's ok to send?...
//if(!(rwFlags() & 0x1) || !(openFlags() & 1))
//if(!(openFlags() & 1))
// continue;
mp->sendStop();
}
}
//---------------------------------------------------
// If playing, clear all notes and flush out any
// stuck notes which were put directly to the device
//---------------------------------------------------
if(MusEGlobal::audio->isPlaying())
{
_playEvents.clear();
for(iMPEvent i = _stuckNotes.begin(); i != _stuckNotes.end(); ++i)
{
MidiPlayEvent ev(*i);
ev.setTime(0);
putEvent(ev); // For immediate playback try putEvent, putMidiEvent, or sendEvent (for the optimizations).
}
_stuckNotes.clear();
}
//---------------------------------------------------
// Send new controller values
//---------------------------------------------------
// Find channels on this port used in the song...
bool usedChans[MIDI_CHANNELS];
int usedChanCount = 0;
for(int i = 0; i < MIDI_CHANNELS; ++i)
usedChans[i] = false;
if(MusEGlobal::song->click() && MusEGlobal::clickPort == _port)
{
usedChans[MusEGlobal::clickChan] = true;
++usedChanCount;
}
bool drum_found = false;
for(ciMidiTrack imt = MusEGlobal::song->midis()->begin(); imt != MusEGlobal::song->midis()->end(); ++imt)
{
//------------------------------------------------------------
// While we are at it, flush out any track-related playback stuck notes
// (NOT 'live' notes) which were not put directly to the device
//------------------------------------------------------------
MPEventList& mel = (*imt)->stuckNotes;
for(iMPEvent i = mel.begin(), i_next = i; i != mel.end(); i = i_next)
{
++i_next;
if((*i).port() != _port)
continue;
MidiPlayEvent ev(*i);
ev.setTime(0);
putEvent(ev); // For immediate playback try putEvent, putMidiEvent, or sendEvent (for the optimizations).
mel.erase(i);
}
if((*imt)->type() == MusECore::Track::DRUM)
{
if(!drum_found)
{
drum_found = true;
for(int i = 0; i < DRUM_MAPSIZE; ++i)
{
// Default to track port if -1 and track channel if -1.
int mport = MusEGlobal::drumMap[i].port;
if(mport == -1)
mport = (*imt)->outPort();
int mchan = MusEGlobal::drumMap[i].channel;
if(mchan == -1)
mchan = (*imt)->outChannel();
if(mport != _port || usedChans[mchan])
continue;
usedChans[mchan] = true;
++usedChanCount;
if(usedChanCount >= MIDI_CHANNELS)
break; // All are used, done searching.
}
}
}
else
{
if((*imt)->outPort() != _port || usedChans[(*imt)->outChannel()])
continue;
usedChans[(*imt)->outChannel()] = true;
++usedChanCount;
}
if(usedChanCount >= MIDI_CHANNELS)
break; // All are used. Done searching.
}
for(iMidiCtrlValList ivl = cll->begin(); ivl != cll->end(); ++ivl)
{
MidiCtrlValList* vl = ivl->second;
int chan = ivl->first >> 24;
if(!usedChans[chan]) // Channel not used in song?
continue;
int ctlnum = vl->num();
// Find the first non-muted value at the given tick...
bool values_found = false;
bool found_value = false;
iMidiCtrlVal imcv = vl->lower_bound(pos);
if(imcv != vl->end() && imcv->first == (int)pos)
{
for( ; imcv != vl->end() && imcv->first == (int)pos; ++imcv)
{
const Part* p = imcv->second.part;
if(!p)
continue;
// Ignore values that are outside of the part.
if(pos < p->tick() || pos >= (p->tick() + p->lenTick()))
continue;
values_found = true;
// Ignore if part or track is muted or off.
if(p->mute())
continue;
const Track* track = p->track();
if(track && (track->isMute() || track->off()))
continue;
found_value = true;
break;
}
}
else
{
while(imcv != vl->begin())
{
--imcv;
const Part* p = imcv->second.part;
if(!p)
continue;
// Ignore values that are outside of the part.
unsigned t = imcv->first;
if(t < p->tick() || t >= (p->tick() + p->lenTick()))
continue;
values_found = true;
// Ignore if part or track is muted or off.
if(p->mute())
continue;
const Track* track = p->track();
if(track && (track->isMute() || track->off()))
continue;
found_value = true;
break;
}
}
if(found_value)
{
// Don't bother sending any sustain values if not playing. Just set the hw state.
if(ctlnum == CTRL_SUSTAIN && !MusEGlobal::audio->isPlaying())
mp->setHwCtrlState(chan, CTRL_SUSTAIN, imcv->second.val);
else
// Use sendEvent to get the optimizations and limiting. But force if there's a value at this exact position.
// NOTE: Why again was this forced? There was a reason. Think it was RJ in response to bug rep, then I modded.
// A reason not to force: If a straight line is drawn on graph, multiple identical events are stored
// (which must be allowed). So seeking through them here sends them all redundantly, not good. // REMOVE Tim.
mp->sendEvent(MidiPlayEvent(0, _port, chan, ME_CONTROLLER, ctlnum, imcv->second.val), false); //, imcv->first == pos);
//mp->sendEvent(MidiPlayEvent(0, _port, chan, ME_CONTROLLER, ctlnum, imcv->second.val), pos == 0 || imcv->first == pos);
}
// Either no value was found, or they were outside parts, or pos is in the unknown area before the first value.
// Send instrument default initial values. NOT for syntis. Use midiState and/or initParams for that.
//if((imcv == vl->end() || !done) && !MusEGlobal::song->record() && instr && !isSynti())
// Hmm, without refinement we can only do this at position 0, due to possible 'skipped' values outside parts, above.
if(!values_found && MusEGlobal::config.midiSendCtlDefaults && !MusEGlobal::song->record() && pos == 0 && instr && !isSynti())
{
MidiControllerList* mcl = instr->controller();
ciMidiController imc = mcl->find(vl->num());
if(imc != mcl->end())
{
MidiController* mc = imc->second;
if(mc->initVal() != CTRL_VAL_UNKNOWN)
// Use sendEvent to get the optimizations and limiting. No force sending. Note the addition of bias.
mp->sendEvent(MidiPlayEvent(0, _port, chan, ME_CONTROLLER, ctlnum, mc->initVal() + mc->bias()), false);
}
}
}
//---------------------------------------------------
// reset sustain
//---------------------------------------------------
for(int ch = 0; ch < MIDI_CHANNELS; ++ch)
{
if(mp->hwCtrlState(ch, CTRL_SUSTAIN) == 127)
{
const MidiPlayEvent ev(0, _port, ch, ME_CONTROLLER, CTRL_SUSTAIN, 0);
putEvent(ev);
}
}
//---------------------------------------------------
// Send STOP and "set song position pointer"
//---------------------------------------------------
// Don't send if external sync is on. The master, and our sync routing system will take care of that.
if(!MusEGlobal::extSyncFlag.value())
{
if(mp->syncInfo().MRTOut())
{
//mp->sendStop(); // Moved above
int beat = (pos * 4) / MusEGlobal::config.division;
mp->sendSongpos(beat);
}
}
}
