QWidget* MenuList::createWidget(QWidget* parent)
{
if(!_track)
return 0;
//if(!_track->isMidiTrack() || _track->type() != Track::AUDIO_SOFTSYNTH)
// return 0;
MidiTrack* track = (MidiTrack*) _track;
MidiDevice* md = 0;
int port = -1;
if (track->type() == Track::AUDIO_SOFTSYNTH)
{
md = dynamic_cast<MidiDevice*> (track);
if (md)
port = md->midiPort();
}
else
port = track->outPort();
list = new QListWidget(parent);
list->setSelectionMode(QAbstractItemView::SingleSelection);
list->setAlternatingRowColors(true);
list->setEditTriggers(QAbstractItemView::NoEditTriggers);
list->setFixedHeight(300);
for (int i = 0; i < MIDI_PORTS; ++i)
{
QString name;
name.sprintf("%d:%s", i + 1, midiPorts[i].portname().toLatin1().constData());
list->insertItem(i, name);
if (i == port)
list->setCurrentRow(i);
}
connect(list, SIGNAL(itemPressed(QListWidgetItem*)), this, SLOT(updateData(QListWidgetItem*)));
//connect(list, SIGNAL(itemClicked(QListWidgetItem*)), this, SLOT(updateData(QListWidgetItem*)));
//connect(list, SIGNAL(itemActivated(QListWidgetItem*)), this, SLOT(updateData(QListWidgetItem*)));
return list;
}
void Audio::processMidi()
{
midiBusy = true;
//
// TODO: syntis should directly write into recordEventList
//
for (iMidiDevice id = midiDevices.begin(); id != midiDevices.end(); ++id)
{
MidiDevice* md = *id;
MPEventList* playEvents = md->playEvents();
//
// erase already played events:
//
iMPEvent nextPlayEvent = md->nextPlayEvent();
playEvents->erase(playEvents->begin(), nextPlayEvent);
// klumsy hack for synti devices:
if (md->isSynti())
{
SynthI* s = (SynthI*) md;
while (s->eventsPending())
{
MidiRecordEvent ev = s->receiveEvent();
md->recordEvent(ev);
}
}
// Is it a Jack midi device?
//MidiJackDevice* mjd = dynamic_cast<MidiJackDevice*>(md);
//if(mjd)
// mjd->collectMidiEvents();
md->collectMidiEvents();
// Take snapshots of the current sizes of the recording fifos,
// because they may change while here in process, asynchronously.
md->beforeProcess();
}
MPEventList* playEvents = metronome->playEvents();
iMPEvent nextPlayEvent = metronome->nextPlayEvent();
playEvents->erase(playEvents->begin(), nextPlayEvent);
// p3.3.25
bool extsync = extSyncFlag.value();
for (iMidiTrack t = song->midis()->begin(); t != song->midis()->end(); ++t)
{
MidiTrack* track = *t;
int port = track->outPort();
MidiDevice* md = midiPorts[port].device();
// Changed by Tim. p3.3.8
//if(md == 0)
// continue;
//MPEventList* playEvents = md->playEvents();
//if (playEvents == 0)
// continue;
//if (!track->isMute())
MPEventList* playEvents = 0;
if (md)
{
playEvents = md->playEvents();
// only add track events if the track is unmuted
if (!track->isMute())
{
if (isPlaying() && (curTickPos < nextTickPos))
collectEvents(track, curTickPos, nextTickPos);
}
}
//
//----------midi recording
//
if (track->recordFlag())
{
//int portMask = track->inPortMask();
// p3.3.38 Removed
//unsigned int portMask = track->inPortMask();
//int channelMask = track->inChannelMask();
MPEventList* rl = track->mpevents();
MidiPort* tport = &midiPorts[port];
// p3.3.38
//for (iMidiDevice id = midiDevices.begin(); id != midiDevices.end(); ++id)
//{
RouteList* irl = track->inRoutes();
for (ciRoute r = irl->begin(); r != irl->end(); ++r)
{
//if(!r->isValid() || (r->type != Route::ALSA_MIDI_ROUTE && r->type != Route::JACK_MIDI_ROUTE))
//if(!r->isValid() || (r->type != Route::MIDI_DEVICE_ROUTE))
if (!r->isValid() || (r->type != Route::MIDI_PORT_ROUTE)) // p3.3.49
continue;
int devport = r->midiPort; // p3.3.49
if (devport == -1)
continue;
//MidiDevice* dev = *id;
//MidiDevice* dev = r->device;
MidiDevice* dev = midiPorts[devport].device(); // p3.3.49
if (!dev)
continue;
// p3.3.50 Removed
//int channel = r->channel;
// NOTE: TODO: Special for input device sysex 'channel' marked as -1, ** IF we end up going with that method **.
// This would mean having a separate 'System' channel listed in the routing popups.
// The other alternative is to accept sysex from a device as long as ANY regular channel is routed from it,
// this does not require a 'System' channel listed in the routing popups.
// But that requires more code below... Done.
//if(channel == -1)
//channel = MIDI_CHANNELS; // Special channel '17'
// continue;
//int devport = dev->midiPort();
// record only from ports marked in portMask:
//if (devport == -1 || !(portMask & (1 << devport)))
//if (devport == -1)
// continue;
//MREventList* el = dev->recordEvents();
//MidiFifo& rf = dev->recordEvents();
int channelMask = r->channel; // p3.3.50
if (channelMask == -1 || channelMask == 0)
continue;
for (int channel = 0; channel < MIDI_CHANNELS; ++channel) // p3.3.50
{
if (!(channelMask & (1 << channel)))
continue;
if (!dev->sysexFIFOProcessed())
{
// Set to the sysex fifo at first.
MidiFifo& rf = dev->recordEvents(MIDI_CHANNELS);
// Get the frozen snapshot of the size.
int count = dev->tmpRecordCount(MIDI_CHANNELS);
for (int i = 0; i < count; ++i)
{
MidiPlayEvent event(rf.peek(i));
//unsigned time = event.time() + segmentSize*(segmentCount-1);
//unsigned time = event.time() + (extsync ? config.division/24 : segmentSize*(segmentCount-1));
//unsigned time = extsync ? curTickPos : (event.time() + segmentSize*(segmentCount-1));
//event.setTime(time);
//if(!extsync)
// event.setTime(event.time() + segmentSize*(segmentCount-1));
event.setPort(port);
// dont't echo controller changes back to software
// synthesizer:
if (!dev->isSynti() && md && track->recEcho())
playEvents->add(event);
// If syncing externally the event time is already in units of ticks, set above.
if (!extsync)
{
//time = tempomap.frame2tick(event.time());
//event.setTime(time); // set tick time
event.setTime(tempomap.frame2tick(event.time())); // set tick time
}
if (recording)
rl->add(event);
}
dev->setSysexFIFOProcessed(true);
}
// Set to the sysex fifo at first.
///MidiFifo& rf = dev->recordEvents(MIDI_CHANNELS);
// Get the frozen snapshot of the size.
///int count = dev->tmpRecordCount(MIDI_CHANNELS);
// Iterate once for sysex fifo (if needed), once for channel fifos.
///for(int sei = 0; sei < 2; ++sei)
{
// If on first pass, do sysex fifo.
/*
if(sei == 0)
{
// Ignore any further channel routes on this device if already done here.
if(dev->sysexFIFOProcessed())
continue;
// Go ahead and set this now.
dev->setSysexFIFOProcessed(true);
// Allow it to fall through with the sysex fifo and count...
}
else
{
// We're on the second pass, do channel fifos.
rf = dev->recordEvents(channel);
// Get the frozen snapshot of the size.
count = dev->tmpRecordCount(channel);
}
*/
MidiFifo& rf = dev->recordEvents(channel);
int count = dev->tmpRecordCount(channel);
//for (iMREvent ie = el->begin(); ie != el->end(); ++ie)
for (int i = 0; i < count; ++i)
{
MidiPlayEvent event(rf.peek(i));
//int channel = ie->channel();
///int channel = event.channel();
int defaultPort = devport;
///if (!(channelMask & (1 << channel)))
///{
/// continue;
///}
//MidiPlayEvent event(*ie);
int drumRecPitch = 0; //prevent compiler warning: variable used without initialization
MidiController *mc = 0;
int ctl = 0;
//Hmmm, hehhh...
// TODO: Clean up a bit around here when it comes to separate events for rec & for playback.
// But not before 0.7 (ml)
int prePitch = 0, preVelo = 0;
event.setChannel(track->outChannel());
if (event.isNote() || event.isNoteOff())
{
//
// apply track values
//
//Apply drum inkey:
if (track->type() == Track::DRUM)
{
int pitch = event.dataA();
//Map note that is played according to drumInmap
drumRecPitch = drumMap[(unsigned int) drumInmap[pitch]].enote;
devport = drumMap[(unsigned int) drumInmap[pitch]].port;
event.setPort(devport);
channel = drumMap[(unsigned int) drumInmap[pitch]].channel;
event.setA(drumMap[(unsigned int) drumInmap[pitch]].anote);
event.setChannel(channel);
}
else
{ //Track transpose if non-drum
prePitch = event.dataA();
int pitch = prePitch + track->transposition;
if (pitch > 127)
pitch = 127;
if (pitch < 0)
pitch = 0;
event.setA(pitch);
}
if (!event.isNoteOff())
{
preVelo = event.dataB();
int velo = preVelo + track->velocity;
velo = (velo * track->compression) / 100;
if (velo > 127)
velo = 127;
if (velo < 1)
velo = 1;
event.setB(velo);
}
}
// Added by T356.
else if (event.type() == ME_CONTROLLER)
{
//printf("11111111111111111111111111111111111111111111111111111\n");
if (track->type() == Track::DRUM)
{
//printf("2222222222222222222222222222222222222222222222222222222222\n");
ctl = event.dataA();
// Regardless of what port the event came from, is it a drum controller event
// according to the track port's instrument?
mc = tport->drumController(ctl);
if (mc)
{
//printf("333333333333333333333333333333333333333333333333\n");
int pitch = ctl & 0x7f;
ctl &= ~0xff;
int dmindex = drumInmap[pitch] & 0x7f;
//Map note that is played according to drumInmap
drumRecPitch = drumMap[dmindex].enote;
devport = drumMap[dmindex].port;
event.setPort(devport);
channel = drumMap[dmindex].channel;
event.setA(ctl | drumMap[dmindex].anote);
event.setChannel(channel);
}
}
}
// p3.3.25
// OOMidi uses a fixed clocks per quarternote of 24.
// At standard 384 ticks per quarternote for example,
// 384/24=16 for a division of 16 sub-frames (16 OOMidi 'ticks').
// That is what we'll use if syncing externally.
//unsigned time = event.time() + segmentSize*(segmentCount-1);
//unsigned time = event.time() + (extsync ? config.division/24 : segmentSize*(segmentCount-1));
// p3.3.34
// Oops, use the current tick.
//unsigned time = extsync ? curTickPos : (event.time() + segmentSize*(segmentCount-1));
//event.setTime(time);
// p3.3.35
// If ext sync, events are now time-stamped with last tick in MidiDevice::recordEvent().
// TODO: Tested, but record resolution not so good. Switch to wall clock based separate list in MidiDevice.
// p3.3.36
//if(!extsync)
// event.setTime(event.time() + segmentSize*(segmentCount-1));
// dont't echo controller changes back to software
// synthesizer:
if (!dev->isSynti())
{
//printf("444444444444444444444444444444444444444444444444444444\n");
//Check if we're outputting to another port than default:
if (devport == defaultPort)
{
//printf("5555555555555555555555555555555555555555555\n");
event.setPort(port);
if (md && track->recEcho())
playEvents->add(event);
}
else
{
//printf("66666666666666666666666666666666666666\n");
// Hmm, this appears to work, but... Will this induce trouble with md->setNextPlayEvent??
MidiDevice* mdAlt = midiPorts[devport].device();
if (mdAlt && track->recEcho())
mdAlt->playEvents()->add(event);
}
// Shall we activate meters even while rec echo is off? Sure, why not...
if (event.isNote() && event.dataB() > track->activity())
track->setActivity(event.dataB());
}
// p3.3.25
// If syncing externally the event time is already in units of ticks, set above.
if (!extsync)
{
//printf("7777777777777777777777777777777777777777777\n");
// p3.3.35
//time = tempomap.frame2tick(event.time());
//event.setTime(time); // set tick time
event.setTime(tempomap.frame2tick(event.time())); // set tick time
}
// Special handling of events stored in rec-lists. a bit hACKish. TODO: Clean up (after 0.7)! :-/ (ml)
if (recording)
{
//printf("888888888888888888888888888888888888888888888888\n");
// In these next steps, it is essential to set the recorded event's port
// to the track port so buildMidiEventList will accept it. Even though
// the port may have no device "<none>".
//
if (track->type() == Track::DRUM)
{
//printf("99999999999999999999999999999999999999999999999999\n");
// Is it a drum controller event?
if (mc)
{
//printf("aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa\n");
MidiPlayEvent drumRecEvent = event;
drumRecEvent.setA(ctl | drumRecPitch);
// In this case, preVelo is simply the controller value.
drumRecEvent.setB(preVelo);
drumRecEvent.setPort(port); //rec-event to current port
drumRecEvent.setChannel(track->outChannel()); //rec-event to current channel
rl->add(drumRecEvent);
}
else
{
//printf("bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb\n");
MidiPlayEvent drumRecEvent = event;
drumRecEvent.setA(drumRecPitch);
drumRecEvent.setB(preVelo);
// Changed by T356.
// Tested: Events were not being recorded for a drum map entry pointing to a
// different port. This must have been wrong - buildMidiEventList would ignore this.
//drumRecEvent.setPort(devport);
drumRecEvent.setPort(port); //rec-event to current port
drumRecEvent.setChannel(track->outChannel()); //rec-event to current channel
rl->add(drumRecEvent);
}
}
else
{
//printf("ccccccccccccccccccccccccccccccccccccccccccccc\n");
// Restore record-pitch to non-transposed value since we don't want the note transposed twice next
MidiPlayEvent recEvent = event;
if (prePitch)
recEvent.setA(prePitch);
if (preVelo)
recEvent.setB(preVelo);
recEvent.setPort(port);
recEvent.setChannel(track->outChannel());
rl->add(recEvent);
}
}
}
}
}
}
}
// Added by Tim. p3.3.8
if (md)
{
//printf("zzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz\n");
md->setNextPlayEvent(playEvents->begin());
}
}
//
// clear all recorded events in midiDevices
// process stuck notes
//
for (iMidiDevice id = midiDevices.begin(); id != midiDevices.end(); ++id)
{
//printf("--------------------------aaaaaaaaaaaaaaaaaaaaaaaaaaaa\n");
MidiDevice* md = *id;
///md->recordEvents()->clear();
// By T356. Done processing this rec buffer, now flip to the other one.
///md->flipRecBuffer();
// We are done with the 'frozen' recording fifos, remove the events.
md->afterProcess();
MPEventList* stuckNotes = md->stuckNotes();
MPEventList* playEvents = md->playEvents();
iMPEvent k;
for (k = stuckNotes->begin(); k != stuckNotes->end(); ++k)
{
if (k->time() >= nextTickPos)
break;
MidiPlayEvent ev(*k);
// p3.3.25
//int frame = tempomap.tick2frame(k->time()) + frameOffset;
if (extsync)
{
ev.setTime(k->time());
}
else
{
int frame = tempomap.tick2frame(k->time()) + frameOffset;
ev.setTime(frame);
}
// p3.3.25
//ev.setTime(frame);
playEvents->add(ev);
}
stuckNotes->erase(stuckNotes->begin(), k);
md->setNextPlayEvent(playEvents->begin());
}
//---------------------------------------------------
// insert metronome clicks
//---------------------------------------------------
MidiDevice* md = 0;
if (midiClickFlag)
md = midiPorts[clickPort].device();
if (song->click() && (isPlaying() || state == PRECOUNT))
{
MPEventList* playEvents = 0;
MPEventList* stuckNotes = 0;
if (md)
{
playEvents = md->playEvents();
stuckNotes = md->stuckNotes();
}
int bar, beat;
unsigned tick;
bool isMeasure = false;
while (midiClick < nextTickPos)
{
if (isPlaying())
{
///sigmap.tickValues(midiClick, &bar, &beat, &tick);
AL::sigmap.tickValues(midiClick, &bar, &beat, &tick);
isMeasure = beat == 0;
}
else if (state == PRECOUNT)
{
isMeasure = (clickno % clicksMeasure) == 0;
}
// p3.3.25
//int frame = tempomap.tick2frame(midiClick) + frameOffset;
int evtime = extsync ? midiClick : tempomap.tick2frame(midiClick) + frameOffset;
// p3.3.25
//MidiPlayEvent ev(frame, clickPort, clickChan, ME_NOTEON,
MidiPlayEvent ev(evtime, clickPort, clickChan, ME_NOTEON,
beatClickNote, beatClickVelo);
if (md)
{
// p3.3.25
//MidiPlayEvent ev(frame, clickPort, clickChan, ME_NOTEON,
MidiPlayEvent ev(evtime, clickPort, clickChan, ME_NOTEON,
beatClickNote, beatClickVelo);
if (isMeasure)
{
ev.setA(measureClickNote);
ev.setB(measureClickVelo);
}
playEvents->add(ev);
}
if (audioClickFlag)
{
// p3.3.25
//MidiPlayEvent ev1(frame, 0, 0, ME_NOTEON, 0, 0);
MidiPlayEvent ev1(evtime, 0, 0, ME_NOTEON, 0, 0);
ev1.setA(isMeasure ? 0 : 1);
metronome->playEvents()->add(ev1);
}
if (md)
{
ev.setB(0);
// p3.3.25
// Removed. Why was this here?
//frame = tempomap.tick2frame(midiClick+20) + frameOffset;
//
// Does it mean this should be changed too?
// No, stuck notes are in units of ticks, not frames like (normal, non-external) play events...
ev.setTime(midiClick + 10);
if (md)
stuckNotes->add(ev);
}
if (isPlaying())
///midiClick = sigmap.bar2tick(bar, beat+1, 0);
midiClick = AL::sigmap.bar2tick(bar, beat + 1, 0);
else if (state == PRECOUNT)
{
midiClick += ticksBeat;
if (clickno)
--clickno;
else
state = START_PLAY;
}
}
if (md)
md->setNextPlayEvent(playEvents->begin());
if (audioClickFlag)
metronome->setNextPlayEvent(metronome->playEvents()->begin());
}
if (state == STOP)
{
//---------------------------------------------------
// end all notes
//---------------------------------------------------
for (iMidiDevice imd = midiDevices.begin(); imd != midiDevices.end(); ++imd)
{
MidiDevice* md = *imd;
MPEventList* playEvents = md->playEvents();
MPEventList* stuckNotes = md->stuckNotes();
for (iMPEvent k = stuckNotes->begin(); k != stuckNotes->end(); ++k)
{
MidiPlayEvent ev(*k);
ev.setTime(0); // play now
playEvents->add(ev);
}
stuckNotes->clear();
}
}
// p3.3.36
//int tickpos = audio->tickPos();
//bool extsync = extSyncFlag.value();
//
// Special for Jack midi devices: Play all Jack midi events up to curFrame.
//
for (iMidiDevice id = midiDevices.begin(); id != midiDevices.end(); ++id)
{
(*id)->processMidi();
/*
int port = md->midiPort();
MidiPort* mp = port != -1 ? &midiPorts[port] : 0;
MPEventList* el = md->playEvents();
if (el->empty())
continue;
iMPEvent i = md->nextPlayEvent();
for(; i != el->end(); ++i)
{
// If syncing to external midi sync, we cannot use the tempo map.
// Therefore we cannot get sub-tick resolution. Just use ticks instead of frames.
//if(i->time() > curFrame)
if(i->time() > (extsync ? tickpos : curFrame))
{
//printf(" curT %d frame %d\n", i->time(), curFrame);
break; // skip this event
}
if(mp)
{
if(mp->sendEvent(*i))
break;
}
else
{
if(md->putEvent(*i))
break;
}
}
md->setNextPlayEvent(i);
*/
}
midiBusy = false;
}
void removePortCtrlEvents(Part* part, bool doClones)
{
// Traverse and process the clone chain ring until we arrive at the same part again.
// The loop is a safety net.
// Update: Due to the varying calls, and order of, incARefcount, (msg)ChangePart, replaceClone, and remove/addPortCtrlEvents,
// we can not rely on the reference count as a safety net in these routines. We will just have to trust the clone chain.
Part* p = part;
//int j = doClones ? p->cevents()->arefCount() : 1;
//if(j > 0)
{
//for(int i = 0; i < j; ++i)
while (1)
{
Track* t = p->track();
if (t && t->isMidiTrack())
{
MidiTrack* mt = (MidiTrack*) t;
int port = mt->outPort();
const EventList* el = p->cevents();
//unsigned len = p->lenTick();
for (ciEvent ie = el->begin(); ie != el->end(); ++ie)
{
const Event& ev = ie->second;
// Added by T356. Do not remove events which are past the end of the part.
// No, actually, do remove ALL of them belonging to the part.
// Just in case there are stray values left after the part end.
//if(ev.tick() >= len)
// break;
if (ev.type() == Controller)
{
int ch = mt->outChannel();
int tck = ev.tick() + p->tick();
int cntrl = ev.dataA();
MidiPort* mp = &midiPorts[port];
// Is it a drum controller event, according to the track port's instrument?
if (mt->type() == Track::DRUM)
{
MidiController* mc = mp->drumController(cntrl);
if (mc)
{
int note = cntrl & 0x7f;
cntrl &= ~0xff;
ch = drumMap[note].channel;
mp = &midiPorts[drumMap[note].port];
cntrl |= drumMap[note].anote;
}
}
mp->deleteController(ch, tck, cntrl, p);
}
}
}
if (!doClones)
break;
// Get the next clone in the chain ring.
p = p->nextClone();
// Same as original part? Finished.
if (p == part)
break;
}
}
}
void addPortCtrlEvents(Event& event, Part* part, bool doClones)
{
// Traverse and process the clone chain ring until we arrive at the same part again.
// The loop is a safety net.
// Update: Due to the varying calls, and order of, incARefcount, (msg)ChangePart, replaceClone, and remove/addPortCtrlEvents,
// we can not rely on the reference count as a safety net in these routines. We will just have to trust the clone chain.
Part* p = part;
//int j = doClones ? p->cevents()->arefCount() : 1;
//if(j > 0)
{
//for(int i = 0; i < j; ++i)
while (1)
{
// Added by Tim. p3.3.6
//printf("addPortCtrlEvents i:%d %s %p events %p refs:%d arefs:%d\n", i, p->name().toLatin1().constData(), p, part->cevents(), part->cevents()->refCount(), j);
Track* t = p->track();
if (t && t->isMidiTrack())
{
MidiTrack* mt = (MidiTrack*) t;
int port = mt->outPort();
//const EventList* el = p->cevents();
unsigned len = p->lenTick();
//for(ciEvent ie = el->begin(); ie != el->end(); ++ie)
//{
//const Event& ev = ie->second;
// Added by Tim. p3.3.6
//printf("addPortCtrlEvents %s len:%d end:%d etick:%d\n", p->name().toLatin1().constData(), p->lenTick(), p->endTick(), event.tick());
// Do not add events which are past the end of the part.
if (event.tick() >= len)
break;
if (event.type() == Controller)
{
int ch = mt->outChannel();
int tck = event.tick() + p->tick();
int cntrl = event.dataA();
int val = event.dataB();
MidiPort* mp = &midiPorts[port];
// Is it a drum controller event, according to the track port's instrument?
if (mt->type() == Track::DRUM)
{
MidiController* mc = mp->drumController(cntrl);
if (mc)
{
int note = cntrl & 0x7f;
cntrl &= ~0xff;
ch = drumMap[note].channel;
mp = &midiPorts[drumMap[note].port];
cntrl |= drumMap[note].anote;
}
}
mp->setControllerVal(ch, tck, cntrl, val, p);
}
//}
}
if (!doClones)
break;
// Get the next clone in the chain ring.
p = p->nextClone();
// Same as original part? Finished.
if (p == part)
break;
}
}
}