bool BackgroundSync::isRollbackRequired(OplogReader& r) {
string hn = r.conn()->getServerAddress();
if (!r.more()) {
// In vanilla Mongo, this happened for one of the
// following reasons:
// - we were ahead of what we are syncing from (don't
// think that is possible anymore)
// - remote oplog is empty for some weird reason
// in either case, if it (strangely) happens, we'll just return
// and our caller will simply try again after a short sleep.
log() << "replSet error empty query result from " << hn << " oplog, attempting rollback" << rsLog;
return true;
}
BSONObj o = r.nextSafe();
uint64_t ts = o["ts"]._numberLong();
uint64_t lastHash = o["h"].numberLong();
GTID gtid = getGTIDFromBSON("_id", o);
if( !theReplSet->gtidManager->rollbackNeeded(gtid, ts, lastHash)) {
log() << "Rollback NOT needed! Our GTID" << gtid << endl;
return false;
}
log() << "Rollback needed! Our GTID" <<
theReplSet->gtidManager->getLiveState().toString() <<
" remote GTID: " << gtid.toString() << ". Attempting rollback." << rsLog;
runRollback(r, ts);
return true;
}
bool isRollbackRequired(OplogReader& r, uint64_t *lastTS) {
string hn = r.conn()->getServerAddress();
verify(r.more());
BSONObj rollbackStatus;
bool found = getRollbackStatus(rollbackStatus);
if (found) {
// we have a rollback in progress,
// must complete it
log() << "Rollback needed, found rollbackStatus: " << rollbackStatus << rsLog;
return true;
}
BSONObj o = r.nextSafe();
uint64_t ts = o["ts"]._numberLong();
uint64_t lastHash = o["h"].numberLong();
GTID gtid = getGTIDFromBSON("_id", o);
if (!theReplSet->gtidManager->rollbackNeeded(gtid, ts, lastHash)) {
log() << "Rollback NOT needed! " << gtid << endl;
return false;
}
log() << "Rollback needed! Our GTID: " <<
theReplSet->gtidManager->getLiveState().toString() <<
", remote GTID: " << gtid.toString() << ". Attempting rollback." << rsLog;
*lastTS = ts;
return true;
}
int run() {
Client::initThread( "oplogreplay" );
toolInfoLog() << "going to connect" << std::endl;
OplogReader r;
r.setTailingQueryOptions( QueryOption_SlaveOk | QueryOption_AwaitData );
r.connect(mongoOplogGlobalParams.from);
toolInfoLog() << "connected" << std::endl;
OpTime start(time(0) - mongoOplogGlobalParams.seconds, 0);
toolInfoLog() << "starting from " << start.toStringPretty() << std::endl;
r.tailingQueryGTE(mongoOplogGlobalParams.ns.c_str(), start);
int num = 0;
while ( r.more() ) {
BSONObj o = r.next();
if (logger::globalLogDomain()->shouldLog(logger::LogSeverity::Debug(2))) {
toolInfoLog() << o << std::endl;
}
if ( o["$err"].type() ) {
toolError() << "error getting oplog" << std::endl;
toolError() << o << std::endl;
return -1;
}
bool print = ++num % 100000 == 0;
if (print) {
toolInfoLog() << num << "\t" << o << std::endl;
}
if ( o["op"].String() == "n" )
continue;
BSONObjBuilder b( o.objsize() + 32 );
BSONArrayBuilder updates( b.subarrayStart( "applyOps" ) );
updates.append( o );
updates.done();
BSONObj c = b.obj();
BSONObj res;
bool ok = conn().runCommand( "admin" , c , res );
if (!ok) {
toolError() << res << std::endl;
} else if (print) {
toolInfoLog() << res << std::endl;
}
}
return 0;
}
bool BackgroundSync::isRollbackRequired(OplogReader& r) {
string hn = r.conn()->getServerAddress();
if (!r.more()) {
try {
BSONObj theirLastOp = r.getLastOp(rsoplog);
if (theirLastOp.isEmpty()) {
log() << "replSet error empty query result from " << hn << " oplog" << rsLog;
sleepsecs(2);
return true;
}
OpTime theirTS = theirLastOp["ts"]._opTime();
if (theirTS < _lastOpTimeFetched) {
log() << "replSet we are ahead of the sync source, will try to roll back"
<< rsLog;
theReplSet->syncRollback(r);
return true;
}
/* we're not ahead? maybe our new query got fresher data. best to come back and try again */
log() << "replSet syncTail condition 1" << rsLog;
sleepsecs(1);
}
catch(DBException& e) {
log() << "replSet error querying " << hn << ' ' << e.toString() << rsLog;
sleepsecs(2);
}
return true;
}
BSONObj o = r.nextSafe();
OpTime ts = o["ts"]._opTime();
long long h = o["h"].numberLong();
if( ts != _lastOpTimeFetched || h != _lastH ) {
log() << "replSet our last op time fetched: " << _lastOpTimeFetched.toStringPretty() << rsLog;
log() << "replset source's GTE: " << ts.toStringPretty() << rsLog;
theReplSet->syncRollback(r);
return true;
}
return false;
}
bool BackgroundSync::_rollbackIfNeeded(OperationContext* txn, OplogReader& r) {
string hn = r.conn()->getServerAddress();
if (!r.more()) {
try {
BSONObj theirLastOp = r.getLastOp(rsOplogName.c_str());
if (theirLastOp.isEmpty()) {
error() << "empty query result from " << hn << " oplog";
sleepsecs(2);
return true;
}
OpTime theirOpTime = extractOpTime(theirLastOp);
if (theirOpTime < _lastOpTimeFetched) {
log() << "we are ahead of the sync source, will try to roll back";
syncRollback(txn, _replCoord->getMyLastOptime(), &r, _replCoord);
return true;
}
/* we're not ahead? maybe our new query got fresher data. best to come back and try again */
log() << "syncTail condition 1";
sleepsecs(1);
}
catch(DBException& e) {
error() << "querying " << hn << ' ' << e.toString();
sleepsecs(2);
}
return true;
}
BSONObj o = r.nextSafe();
OpTime opTime = extractOpTime(o);
long long hash = o["h"].numberLong();
if ( opTime != _lastOpTimeFetched || hash != _lastFetchedHash ) {
log() << "our last op time fetched: " << _lastOpTimeFetched;
log() << "source's GTE: " << opTime;
syncRollback(txn, _replCoord->getMyLastOptime(), &r, _replCoord);
return true;
}
return false;
}
void ReplSetImpl::_getOplogDiagsAsHtml(unsigned server_id, stringstream& ss) const {
const Member *m = findById(server_id);
if( m == 0 ) {
ss << "Error : can't find a member with id: " << server_id << '\n';
return;
}
ss << p("Server : " + m->fullName() + "<br>ns : " + rsoplog );
//const bo fields = BSON( "o" << false << "o2" << false );
const bo fields;
/** todo fix we might want an so timeout here */
OplogReader reader;
if (reader.connect(m->h()) == false) {
ss << "couldn't connect to " << m->fullName();
return;
}
reader.query(rsoplog, Query().sort("$natural",1), 20, 0, &fields);
if ( !reader.haveCursor() ) {
ss << "couldn't query " << rsoplog;
return;
}
static const char *h[] = {"ts","optime","h","op","ns","rest",0};
ss << "<style type=\"text/css\" media=\"screen\">"
"table { font-size:75% }\n"
// "th { background-color:#bbb; color:#000 }\n"
// "td,th { padding:.25em }\n"
"</style>\n";
ss << table(h, true);
//ss << "<pre>\n";
int n = 0;
OpTime otFirst;
OpTime otLast;
OpTime otEnd;
while( reader.more() ) {
bo o = reader.next();
otLast = o["ts"]._opTime();
if( otFirst.isNull() )
otFirst = otLast;
say(ss, o);
n++;
}
if( n == 0 ) {
ss << rsoplog << " is empty\n";
}
else {
reader.query(rsoplog, Query().sort("$natural",-1), 20, 0, &fields);
if( !reader.haveCursor() ) {
ss << "couldn't query [2] " << rsoplog;
return;
}
string x;
bo o = reader.next();
otEnd = o["ts"]._opTime();
while( 1 ) {
stringstream z;
if( o["ts"]._opTime() == otLast )
break;
say(z, o);
x = z.str() + x;
if( !reader.more() )
break;
o = reader.next();
}
if( !x.empty() ) {
ss << "<tr><td>...</td><td>...</td><td>...</td><td>...</td><td>...</td></tr>\n" << x;
//ss << "\n...\n\n" << x;
}
}
ss << _table();
ss << p(time_t_to_String_short(time(0)) + " current time");
if( !otEnd.isNull() ) {
ss << "<p>Log length in time: ";
unsigned d = otEnd.getSecs() - otFirst.getSecs();
double h = d / 3600.0;
ss.precision(3);
if( h < 72 )
ss << h << " hours";
else
ss << h / 24.0 << " days";
ss << "</p>\n";
}
}
void BackgroundSync::produce() {
// this oplog reader does not do a handshake because we don't want the server it's syncing
// from to track how far it has synced
OplogReader r;
OpTime lastOpTimeFetched;
// find a target to sync from the last op time written
getOplogReader(r);
// no server found
{
boost::unique_lock<boost::mutex> lock(_mutex);
if (_currentSyncTarget == NULL) {
lock.unlock();
sleepsecs(1);
// if there is no one to sync from
return;
}
lastOpTimeFetched = _lastOpTimeFetched;
}
r.tailingQueryGTE(rsoplog, lastOpTimeFetched);
// if target cut connections between connecting and querying (for
// example, because it stepped down) we might not have a cursor
if (!r.haveCursor()) {
return;
}
uassert(1000, "replSet source for syncing doesn't seem to be await capable -- is it an older version of mongodb?", r.awaitCapable() );
if (isRollbackRequired(r)) {
stop();
return;
}
while (!inShutdown()) {
if (!r.moreInCurrentBatch()) {
// Check some things periodically
// (whenever we run out of items in the
// current cursor batch)
int bs = r.currentBatchMessageSize();
if( bs > 0 && bs < BatchIsSmallish ) {
// on a very low latency network, if we don't wait a little, we'll be
// getting ops to write almost one at a time. this will both be expensive
// for the upstream server as well as potentially defeating our parallel
// application of batches on the secondary.
//
// the inference here is basically if the batch is really small, we are
// "caught up".
//
dassert( !Lock::isLocked() );
sleepmillis(SleepToAllowBatchingMillis);
}
if (theReplSet->gotForceSync()) {
return;
}
// If we are transitioning to primary state, we need to leave
// this loop in order to go into bgsync-pause mode.
if (isAssumingPrimary() || theReplSet->isPrimary()) {
return;
}
// re-evaluate quality of sync target
if (shouldChangeSyncTarget()) {
return;
}
{
//record time for each getmore
TimerHolder batchTimer(&getmoreReplStats);
// This calls receiveMore() on the oplogreader cursor.
// It can wait up to five seconds for more data.
r.more();
}
networkByteStats.increment(r.currentBatchMessageSize());
if (!r.moreInCurrentBatch()) {
// If there is still no data from upstream, check a few more things
// and then loop back for another pass at getting more data
{
boost::unique_lock<boost::mutex> lock(_mutex);
if (_pause ||
!_currentSyncTarget ||
!_currentSyncTarget->hbinfo().hbstate.readable()) {
return;
}
}
r.tailCheck();
if( !r.haveCursor() ) {
LOG(1) << "replSet end syncTail pass" << rsLog;
return;
}
continue;
}
}
// At this point, we are guaranteed to have at least one thing to read out
// of the oplogreader cursor.
BSONObj o = r.nextSafe().getOwned();
opsReadStats.increment();
{
boost::unique_lock<boost::mutex> lock(_mutex);
_appliedBuffer = false;
}
OCCASIONALLY {
LOG(2) << "bgsync buffer has " << _buffer.size() << " bytes" << rsLog;
}
// the blocking queue will wait (forever) until there's room for us to push
_buffer.push(o);
bufferCountGauge.increment();
bufferSizeGauge.increment(getSize(o));
{
boost::unique_lock<boost::mutex> lock(_mutex);
_lastH = o["h"].numberLong();
_lastOpTimeFetched = o["ts"]._opTime();
LOG(3) << "replSet lastOpTimeFetched: "
<< _lastOpTimeFetched.toStringPretty() << rsLog;
}
}
}
/* initial oplog application, during initial sync, after cloning.
@return false on failure.
this method returns an error and doesn't throw exceptions (i think).
*/
bool ReplSetImpl::initialSyncOplogApplication(
const Member *source,
OpTime applyGTE,
OpTime minValid)
{
if( source == 0 ) return false;
const string hn = source->h().toString();
OpTime ts;
try {
OplogReader r;
if( !r.connect(hn) ) {
log() << "replSet initial sync error can't connect to " << hn << " to read " << rsoplog << rsLog;
return false;
}
{
BSONObjBuilder q;
q.appendDate("$gte", applyGTE.asDate());
BSONObjBuilder query;
query.append("ts", q.done());
BSONObj queryObj = query.done();
r.query(rsoplog, queryObj);
}
assert( r.haveCursor() );
/* we lock outside the loop to avoid the overhead of locking on every operation. server isn't usable yet anyway! */
writelock lk("");
{
if( !r.more() ) {
sethbmsg("replSet initial sync error reading remote oplog");
log() << "replSet initial sync error remote oplog (" << rsoplog << ") on host " << hn << " is empty?" << rsLog;
return false;
}
bo op = r.next();
OpTime t = op["ts"]._opTime();
r.putBack(op);
if( op.firstElement().fieldName() == string("$err") ) {
log() << "replSet initial sync error querying " << rsoplog << " on " << hn << " : " << op.toString() << rsLog;
return false;
}
uassert( 13508 , str::stream() << "no 'ts' in first op in oplog: " << op , !t.isNull() );
if( t > applyGTE ) {
sethbmsg(str::stream() << "error " << hn << " oplog wrapped during initial sync");
log() << "replSet initial sync expected first optime of " << applyGTE << rsLog;
log() << "replSet initial sync but received a first optime of " << t << " from " << hn << rsLog;
return false;
}
}
// todo : use exhaust
unsigned long long n = 0;
while( 1 ) {
if( !r.more() )
break;
BSONObj o = r.nextSafe(); /* note we might get "not master" at some point */
{
ts = o["ts"]._opTime();
/* if we have become primary, we dont' want to apply things from elsewhere
anymore. assumePrimary is in the db lock so we are safe as long as
we check after we locked above. */
if( (source->state() != MemberState::RS_PRIMARY &&
source->state() != MemberState::RS_SECONDARY) ||
replSetForceInitialSyncFailure ) {
int f = replSetForceInitialSyncFailure;
if( f > 0 ) {
replSetForceInitialSyncFailure = f-1;
log() << "replSet test code invoked, replSetForceInitialSyncFailure" << rsLog;
throw DBException("forced error",0);
}
log() << "replSet we are now primary" << rsLog;
throw DBException("primary changed",0);
}
if( ts >= applyGTE ) {
// optimes before we started copying need not be applied.
syncApply(o);
}
_logOpObjRS(o); /* with repl sets we write the ops to our oplog too */
}
if( ++n % 100000 == 0 ) {
// simple progress metering
log() << "replSet initialSyncOplogApplication " << n << rsLog;
}
}
}
catch(DBException& e) {
if( ts <= minValid ) {
// didn't make it far enough
log() << "replSet initial sync failing, error applying oplog " << e.toString() << rsLog;
return false;
}
}
return true;
}
bool ReplSetImpl::_initialSyncOplogApplication(OplogReader& r, const Member *source,
const OpTime& applyGTE, const OpTime& minValid) {
const string hn = source->fullName();
OplogReader missingObjReader;
try {
r.tailingQueryGTE( rsoplog, applyGTE );
if ( !r.haveCursor() ) {
log() << "replSet initial sync oplog query error" << rsLog;
return false;
}
{
if( !r.more() ) {
sethbmsg("replSet initial sync error reading remote oplog");
log() << "replSet initial sync error remote oplog (" << rsoplog << ") on host " << hn << " is empty?" << rsLog;
return false;
}
bo op = r.next();
OpTime t = op["ts"]._opTime();
r.putBack(op);
if( op.firstElementFieldName() == string("$err") ) {
log() << "replSet initial sync error querying " << rsoplog << " on " << hn << " : " << op.toString() << rsLog;
return false;
}
uassert( 13508 , str::stream() << "no 'ts' in first op in oplog: " << op , !t.isNull() );
if( t > applyGTE ) {
sethbmsg(str::stream() << "error " << hn << " oplog wrapped during initial sync");
log() << "replSet initial sync expected first optime of " << applyGTE << rsLog;
log() << "replSet initial sync but received a first optime of " << t << " from " << hn << rsLog;
return false;
}
sethbmsg(str::stream() << "initial oplog application from " << hn << " starting at "
<< t.toStringPretty() << " to " << minValid.toStringPretty());
}
}
catch(DBException& e) {
log() << "replSet initial sync failing: " << e.toString() << rsLog;
return false;
}
/* we lock outside the loop to avoid the overhead of locking on every operation. */
writelock lk("");
// todo : use exhaust
OpTime ts;
time_t start = time(0);
unsigned long long n = 0;
while( 1 ) {
try {
if( !r.more() )
break;
BSONObj o = r.nextSafe(); /* note we might get "not master" at some point */
ts = o["ts"]._opTime();
{
if( (source->state() != MemberState::RS_PRIMARY &&
source->state() != MemberState::RS_SECONDARY) ||
replSetForceInitialSyncFailure ) {
int f = replSetForceInitialSyncFailure;
if( f > 0 ) {
replSetForceInitialSyncFailure = f-1;
log() << "replSet test code invoked, replSetForceInitialSyncFailure" << rsLog;
throw DBException("forced error",0);
}
log() << "replSet we are now primary" << rsLog;
throw DBException("primary changed",0);
}
if( ts >= applyGTE ) { // optimes before we started copying need not be applied.
bool failedUpdate = syncApply(o);
if( failedUpdate ) {
// we don't have the object yet, which is possible on initial sync. get it.
log() << "replSet info adding missing object" << endl; // rare enough we can log
if( !missingObjReader.connect(hn) ) { // ok to call more than once
log() << "replSet initial sync fails, couldn't connect to " << hn << endl;
return false;
}
const char *ns = o.getStringField("ns");
BSONObj query = BSONObjBuilder().append(o.getObjectField("o2")["_id"]).obj(); // might be more than just _id in the update criteria
BSONObj missingObj;
try {
missingObj = missingObjReader.findOne(
ns,
query );
} catch(...) {
log() << "replSet assertion fetching missing object" << endl;
throw;
}
if( missingObj.isEmpty() ) {
log() << "replSet missing object not found on source. presumably deleted later in oplog" << endl;
log() << "replSet o2: " << o.getObjectField("o2").toString() << endl;
log() << "replSet o firstfield: " << o.getObjectField("o").firstElementFieldName() << endl;
}
else {
Client::Context ctx(ns);
try {
DiskLoc d = theDataFileMgr.insert(ns, (void*) missingObj.objdata(), missingObj.objsize());
assert( !d.isNull() );
} catch(...) {
log() << "replSet assertion during insert of missing object" << endl;
throw;
}
// now reapply the update from above
bool failed = syncApply(o);
if( failed ) {
log() << "replSet update still fails after adding missing object " << ns << endl;
assert(false);
}
}
}
}
_logOpObjRS(o); /* with repl sets we write the ops to our oplog too */
}
if ( ++n % 1000 == 0 ) {
time_t now = time(0);
if (now - start > 10) {
// simple progress metering
log() << "replSet initialSyncOplogApplication applied " << n << " operations, synced to "
<< ts.toStringPretty() << rsLog;
start = now;
}
}
if ( ts > minValid ) {
break;
}
getDur().commitIfNeeded();
}
catch (DBException& e) {
// skip duplicate key exceptions
if( e.getCode() == 11000 || e.getCode() == 11001 ) {
continue;
}
// handle cursor not found (just requery)
if( e.getCode() == 13127 ) {
log() << "replSet requerying oplog after cursor not found condition, ts: " << ts.toStringPretty() << endl;
r.resetCursor();
r.tailingQueryGTE(rsoplog, ts);
if( r.haveCursor() ) {
continue;
}
}
// TODO: handle server restart
if( ts <= minValid ) {
// didn't make it far enough
log() << "replSet initial sync failing, error applying oplog : " << e.toString() << rsLog;
return false;
}
// otherwise, whatever
break;
}
}
return true;
}
bool replset::InitialSync::oplogApplication(OplogReader& r, const Member* source,
const OpTime& applyGTE, const OpTime& minValid) {
const string hn = source->fullName();
try {
r.tailingQueryGTE( rsoplog, applyGTE );
if ( !r.haveCursor() ) {
log() << "replSet initial sync oplog query error" << rsLog;
return false;
}
{
if( !r.more() ) {
sethbmsg("replSet initial sync error reading remote oplog");
log() << "replSet initial sync error remote oplog (" << rsoplog << ") on host " << hn << " is empty?" << rsLog;
return false;
}
bo op = r.next();
OpTime t = op["ts"]._opTime();
r.putBack(op);
if( op.firstElementFieldName() == string("$err") ) {
log() << "replSet initial sync error querying " << rsoplog << " on " << hn << " : " << op.toString() << rsLog;
return false;
}
uassert( 13508 , str::stream() << "no 'ts' in first op in oplog: " << op , !t.isNull() );
if( t > applyGTE ) {
sethbmsg(str::stream() << "error " << hn << " oplog wrapped during initial sync");
log() << "replSet initial sync expected first optime of " << applyGTE << rsLog;
log() << "replSet initial sync but received a first optime of " << t << " from " << hn << rsLog;
return false;
}
sethbmsg(str::stream() << "initial oplog application from " << hn << " starting at "
<< t.toStringPretty() << " to " << minValid.toStringPretty());
}
}
catch(DBException& e) {
log() << "replSet initial sync failing: " << e.toString() << rsLog;
return false;
}
/* we lock outside the loop to avoid the overhead of locking on every operation. */
writelock lk("");
// todo : use exhaust
OpTime ts;
time_t start = time(0);
unsigned long long n = 0;
int fails = 0;
while( ts < minValid ) {
try {
// There are some special cases with initial sync (see the catch block), so we
// don't want to break out of this while until we've reached minvalid. Thus, we'll
// keep trying to requery.
if( !r.more() ) {
OCCASIONALLY log() << "replSet initial sync oplog: no more records" << endl;
sleepsecs(1);
r.resetCursor();
r.tailingQueryGTE(rsoplog, theReplSet->lastOpTimeWritten);
if ( !r.haveCursor() ) {
if (fails++ > 30) {
log() << "replSet initial sync tried to query oplog 30 times, giving up" << endl;
return false;
}
}
continue;
}
BSONObj o = r.nextSafe(); /* note we might get "not master" at some point */
ts = o["ts"]._opTime();
{
if( (source->state() != MemberState::RS_PRIMARY &&
source->state() != MemberState::RS_SECONDARY) ||
replSetForceInitialSyncFailure ) {
int f = replSetForceInitialSyncFailure;
if( f > 0 ) {
replSetForceInitialSyncFailure = f-1;
log() << "replSet test code invoked, replSetForceInitialSyncFailure" << rsLog;
throw DBException("forced error",0);
}
log() << "replSet we are now primary" << rsLog;
throw DBException("primary changed",0);
}
applyOp(o, applyGTE);
}
if ( ++n % 1000 == 0 ) {
time_t now = time(0);
if (now - start > 10) {
// simple progress metering
log() << "replSet initialSyncOplogApplication applied " << n << " operations, synced to "
<< ts.toStringPretty() << rsLog;
start = now;
}
}
getDur().commitIfNeeded();
}
catch (DBException& e) {
// Skip duplicate key exceptions.
// These are relatively common on initial sync: if a document is inserted
// early in the clone step, the insert will be replayed but the document
// will probably already have been cloned over.
if( e.getCode() == 11000 || e.getCode() == 11001 || e.getCode() == 12582) {
continue;
}
// handle cursor not found (just requery)
if( e.getCode() == 13127 ) {
log() << "replSet requerying oplog after cursor not found condition, ts: " << ts.toStringPretty() << endl;
r.resetCursor();
r.tailingQueryGTE(rsoplog, ts);
if( r.haveCursor() ) {
continue;
}
}
// TODO: handle server restart
if( ts <= minValid ) {
// didn't make it far enough
log() << "replSet initial sync failing, error applying oplog : " << e.toString() << rsLog;
return false;
}
// otherwise, whatever, we'll break out of the loop and catch
// anything that's really wrong in syncTail
}
}
return true;
}
/* initial oplog application, during initial sync, after cloning.
@return false on failure.
this method returns an error and doesn't throw exceptions (i think).
*/
bool ReplSetImpl::initialSyncOplogApplication(
const Member *source,
OpTime applyGTE,
OpTime minValid) {
if( source == 0 ) return false;
const string hn = source->h().toString();
OplogReader r;
try {
if( !r.connect(hn) ) {
log() << "replSet initial sync error can't connect to " << hn << " to read " << rsoplog << rsLog;
return false;
}
r.queryGTE( rsoplog, applyGTE );
assert( r.haveCursor() );
{
if( !r.more() ) {
sethbmsg("replSet initial sync error reading remote oplog");
log() << "replSet initial sync error remote oplog (" << rsoplog << ") on host " << hn << " is empty?" << rsLog;
return false;
}
bo op = r.next();
OpTime t = op["ts"]._opTime();
r.putBack(op);
if( op.firstElement().fieldName() == string("$err") ) {
log() << "replSet initial sync error querying " << rsoplog << " on " << hn << " : " << op.toString() << rsLog;
return false;
}
uassert( 13508 , str::stream() << "no 'ts' in first op in oplog: " << op , !t.isNull() );
if( t > applyGTE ) {
sethbmsg(str::stream() << "error " << hn << " oplog wrapped during initial sync");
log() << "replSet initial sync expected first optime of " << applyGTE << rsLog;
log() << "replSet initial sync but received a first optime of " << t << " from " << hn << rsLog;
return false;
}
sethbmsg(str::stream() << "initial oplog application from " << hn << " starting at "
<< t.toStringPretty() << " to " << minValid.toStringPretty());
}
}
catch(DBException& e) {
log() << "replSet initial sync failing: " << e.toString() << rsLog;
return false;
}
/* we lock outside the loop to avoid the overhead of locking on every operation. */
writelock lk("");
// todo : use exhaust
OpTime ts;
time_t start = time(0);
unsigned long long n = 0;
while( 1 ) {
try {
if( !r.more() )
break;
BSONObj o = r.nextSafe(); /* note we might get "not master" at some point */
{
ts = o["ts"]._opTime();
/* if we have become primary, we dont' want to apply things from elsewhere
anymore. assumePrimary is in the db lock so we are safe as long as
we check after we locked above. */
if( (source->state() != MemberState::RS_PRIMARY &&
source->state() != MemberState::RS_SECONDARY) ||
replSetForceInitialSyncFailure ) {
int f = replSetForceInitialSyncFailure;
if( f > 0 ) {
replSetForceInitialSyncFailure = f-1;
log() << "replSet test code invoked, replSetForceInitialSyncFailure" << rsLog;
throw DBException("forced error",0);
}
log() << "replSet we are now primary" << rsLog;
throw DBException("primary changed",0);
}
if( ts >= applyGTE ) {
// optimes before we started copying need not be applied.
syncApply(o);
}
_logOpObjRS(o); /* with repl sets we write the ops to our oplog too */
}
if ( ++n % 1000 == 0 ) {
time_t now = time(0);
if (now - start > 10) {
// simple progress metering
log() << "replSet initialSyncOplogApplication applied " << n << " operations, synced to "
<< ts.toStringPretty() << rsLog;
start = now;
}
}
getDur().commitIfNeeded();
}
catch (DBException& e) {
// skip duplicate key exceptions
if( e.getCode() == 11000 || e.getCode() == 11001 ) {
continue;
}
// handle cursor not found (just requery)
if( e.getCode() == 13127 ) {
r.resetCursor();
r.queryGTE(rsoplog, ts);
if( r.haveCursor() ) {
continue;
}
}
// TODO: handle server restart
if( ts <= minValid ) {
// didn't make it far enough
log() << "replSet initial sync failing, error applying oplog " << e.toString() << rsLog;
return false;
}
// otherwise, whatever
break;
}
}
return true;
}