/** \brief Returns a human-readable string representation of the entry.
*
* This function transforms the basic information of the entry in a
* string. Note that most of the information is lost as the function
* is likely to only display the filename and the size of the file,
* nothing more.
*
* \return A human-readable string representation of the entry.
*/
std::string FileEntry::toString() const
{
OutputStringStream sout;
sout << m_filename;
if(isDirectory())
{
sout << " (directory)";
}
else
{
sout << " ("
<< m_uncompressed_size << " byte"
<< (m_uncompressed_size == 1 ? "" : "s");
size_t const compressed_size(getCompressedSize());
if(compressed_size != m_uncompressed_size)
{
// this is not currently accessible since only the
// ZipLocalEntry and ZipCentralDirectoryEntry have
// a compressed size
sout << ", " // LCOV_EXCL_LINE
<< compressed_size << " byte" // LCOV_EXCL_LINE
<< (compressed_size == 1 ? "" : "s") // LCOV_EXCL_LINE
<< " compressed"; // LCOV_EXCL_LINE
}
sout << ")";
}
return sout.str();
}
int InflateInputStreambuf::underflow() {
// If not underflow don't fill buffer
if ( gptr() < egptr() )
return static_cast< unsigned char >( *gptr() ) ;
// Prepare _outvec and get array pointers
_zs.avail_out = _outvecsize ;
_zs.next_out = reinterpret_cast< unsigned char * >( &( _outvec[ 0 ] ) ) ;
// Inflate until _outvec is full
// eof (or I/O prob) on _inbuf will break out of loop too.
int err = Z_OK ;
while ( _zs.avail_out > 0 && err == Z_OK ) {
if ( _zs.avail_in == 0 ) { // fill _invec
int bc = static_cast< int >( _inbuf->sgetn( &(_invec[ 0 ] ) ,
_invecsize ) ) ;
// FIXME: handle i/o problems.
_zs.next_in = reinterpret_cast< unsigned char * >( &( _invec[0] ) ) ;
_zs.avail_in = bc ;
// If we could not read any new data (bc == 0) and inflate isn't
// done it will return Z_BUF_ERROR and thus breaks out of the
// loop. This means we don't have to respond to the situation
// where we can't read more bytes here.
}
err = inflate( &_zs, Z_NO_FLUSH ) ;
}
// Normally the number of inflated bytes will be the
// full length of the output buffer, but if we can't read
// more input from the _inbuf streambuf, we end up with
// less.
int inflated_bytes = _outvecsize - _zs.avail_out ;
setg( &( _outvec[ 0 ] ),
&( _outvec[ 0 ] ),
&( _outvec[ 0 ] ) + inflated_bytes ) ;
// FIXME: look at the error returned from inflate here, if there is
// some way to report it to the InflateInputStreambuf user.
// Until I find out I'll just print a warning to stdout.
if( err != Z_OK && err != Z_STREAM_END ) {
#if defined (HAVE_STD_IOSTREAM) && defined (USE_STD_IOSTREAM)
// Throw an exception to make istream set badbit
OutputStringStream msgs ;
msgs << "InflateInputStreambuf: inflate failed" ;
#ifdef HAVE_ZERROR
msgs << ": " << zError( err ) ;
#endif
throw IOException( msgs.str() ) ;
#endif
// If HAVE_STD_IOSTREAM not defined we just return eof
// if no output is produced, and that happens anyway
}
if (inflated_bytes > 0 )
return static_cast< unsigned char >( *gptr() ) ;
else
return EOF ; // traits_type::eof() ;
}
inline String
print(
ArgP&&... args
) {
OutputStringStream stream;
// Ensure stream does not flush after every output operation
stream.flags(stream.flags() & ~ios::unitbuf);
write<format>(
stream,
std::forward<ArgP>(args)...
);
return stream.str();
}
/** \brief Clean up the InflateInputStreambuf object.
*
* The destructor makes sure all allocated resources get cleaned up.
*/
InflateInputStreambuf::~InflateInputStreambuf()
{
// Dealloc z_stream stuff
int const err(inflateEnd(&m_zs));
if(err != Z_OK)
{
// in a destructor we cannot throw...
OutputStringStream msgs; // LCOV_EXCL_LINE
msgs << "InflateInputStreambuf::~InflateInputStreambuf(): inflateEnd() failed" // LCOV_EXCL_LINE
<< ": " << zError(err); // LCOV_EXCL_LINE
/** \TODO
* Write an error callback interface and call that instead of
* using std::cerr...
*/
std::cerr << msgs.str() << std::endl; // LCOV_EXCL_LINE
}
}
TEST(Document, AcceptWriter) {
Document doc;
doc.Parse(" { \"hello\" : \"world\", \"t\" : true , \"f\" : false, \"n\": null, \"i\":123, \"pi\": 3.1416, \"a\":[1, 2, 3, 4] } ");
OutputStringStream os;
Writer<OutputStringStream> writer(os);
doc.Accept(writer);
EXPECT_EQ("{\"hello\":\"world\",\"t\":true,\"f\":false,\"n\":null,\"i\":123,\"pi\":3.1416,\"a\":[1,2,3,4]}", os.str());
}
/** \brief Called when more data is required.
*
* The function ensures that at least one byte is available
* in the input area by updating the pointers to the input area
* and reading more data in from the input sequence if required.
*
* This function actually passes the data through the zlib library
* to decompress it.
*
* \return The value of that character on success or
* std::streambuf::traits_type::eof() on failure.
*/
std::streambuf::int_type InflateInputStreambuf::underflow()
{
// If not really underflow do not fill buffer
// (is that really possible?!)
if(gptr() < egptr())
{
return traits_type::to_int_type(*gptr()); // LCOV_EXCL_LINE
}
// Prepare _outvec and get array pointers
m_zs.avail_out = getBufferSize();
m_zs.next_out = reinterpret_cast<unsigned char *>(&m_outvec[0]);
// Inflate until _outvec is full
// eof (or I/O prob) on _inbuf will break out of loop too.
int err(Z_OK);
while(m_zs.avail_out > 0 && err == Z_OK)
{
if(m_zs.avail_in == 0)
{
// fill m_invec
std::streamsize const bc(m_inbuf->sgetn(&m_invec[0], getBufferSize()));
/** \FIXME
* Add I/O error handling while inflating data from a file.
*/
m_zs.next_in = reinterpret_cast<unsigned char *>(&m_invec[0]);
m_zs.avail_in = bc;
// If we could not read any new data (bc == 0) and inflate is not
// done it will return Z_BUF_ERROR and thus breaks out of the
// loop. This means we do not have to respond to the situation
// where we cannot read more bytes here.
}
err = inflate(&m_zs, Z_NO_FLUSH);
}
// Normally the number of inflated bytes will be the
// full length of the output buffer, but if we can't read
// more input from the _inbuf streambuf, we end up with
// less.
offset_t const inflated_bytes = getBufferSize() - m_zs.avail_out;
setg(&m_outvec[0], &m_outvec[0], &m_outvec[0] + inflated_bytes);
/** \FIXME
* Look at the error returned from inflate here, if there is
* some way to report it to the InflateInputStreambuf user.
* Until I find out I'll just print a warning to stdout.
* This at least throws, we probably want to create a log
* mechanism that the end user can connect to with a callback.
*/
if(err != Z_OK && err != Z_STREAM_END)
{
OutputStringStream msgs;
msgs << "InflateInputStreambuf::underflow(): inflate failed"
<< ": " << zError(err);
// Throw an exception to immediately exit to the read() or similar
// function and make istream set badbit
throw IOException(msgs.str());
}
if(inflated_bytes > 0)
{
return traits_type::to_int_type(*gptr());
}
return traits_type::eof();
}
string BasicEntry::toString() const {
OutputStringStream sout ;
sout << _filename << " (" << _size << " bytes)" ;
return sout.str() ;
}