void MIG15_Setup (AirStrucPtr const ControlledAC, ULong Version)
{
ClassPtr data = ControlledAC->classtype;
PMODEL pModel = ControlledAC->fly.pModel;
Model& Model = *ControlledAC->fly.pModel;
AircraftAnimData* adptr = (AircraftAnimData* )ControlledAC->Anim;
switch (Version)
{
case 1:
Model.Type = AT_MIG15;
break;
case 2:
Model.Type = AT_MIG15BIS;
break;
}
SWord CoG = -388;//484; //Max 388 (Wing 26%MAC)
PMAINPLANE pMainPlane = new MAINPLANE (pModel, 71000, 240, 390, 32000, 190, 220);
pMainPlane->SetPosition(125, 0, -330-CoG, 370, -15, -510-CoG);
pMainPlane->SetOrientation (0.75, 0, -3, 0.75, 0, -3); //IGNORE SWEEP
pMainPlane->SetMaskAngle(0, 0, 0, 0);//-0.534, -0.666, 50, 50);//
pMainPlane->SetDragPolar (0.0175, 0.0825);
pMainPlane->SetCurves ("MIG15", "Cl", "Cd", "CompCd0", "CompK", "Cm");
pMainPlane->dCMdq = 0;//-0.01;//
pMainPlane->dCMdp = 0;
pMainPlane->dCMdr = 0;
pMainPlane->buffetAoa0 = Degs2Rads(13);
pMainPlane->buffetAoa1 = Degs2Rads(17.5);
pMainPlane->buffetM0 = 0.8;
pMainPlane->buffetM1 = 1.0;
pMainPlane->ACMmaxaoa = Degs2Rads(15);
PSURFACE pTailPlane1 = new SURFACE (pModel, ST_PLANE, SD_TAILPLANE, 15000);//, 110);
pTailPlane1->SetPosition (55, 175, -875-CoG);
pTailPlane1->SetOrientation (0, 0, 0);
pTailPlane1->SetMaskAngle(0, 0);//-0.675, 50);//
pTailPlane1->SetCurves ("MIG15", "TailCl", "COMM", "TailCd");//, "", "", "COMM", "CompK");
PSURFACE pTailPlane2 = new SURFACE (pModel, ST_PLANE, SD_TAILPLANE, 15000);//, 110);
pTailPlane2->SetPosition (-55, 175, -875-CoG);
pTailPlane2->SetOrientation (0, 0, 0);
pTailPlane2->SetMaskAngle(0, 0);//0.675, 50);//
pTailPlane2->SetCurves ("MIG15", "TailCl", "COMM", "TailCd");//, "", "", "COMM", "CompK");
PSURFACE pFin = new SURFACE (pModel, ST_PLANE, SD_FIN, 40000);//40000);//, 260);
pFin->SetPosition (0, 100, -730-CoG);
pFin->SetOrientation (0, 0, -90);
pFin->SetMaskAngle(0, 0);//-0.207, 50);//-0.1, 100);//
pFin->SetCurves ("MIG15", "FinCl", "COMM", "TailCd");//, "", "", "COMM", "CompK");
PCYLINDER pCylinder1 = new CYLINDER (pModel, 275, 135, 145);
pCylinder1->SetPosition(0, 0, -135-CoG);
pCylinder1->SetOrientation (0, 0, 0);
PCYLINDER pCylinder2 = new CYLINDER (pModel, 275, 145, 145);
pCylinder2->SetPosition(0, 0, -410-CoG);
pCylinder2->SetOrientation (0, 0, 0);
PCYLINDER pCylinder3 = new CYLINDER (pModel, 275, 115, 115);
pCylinder3->SetPosition(0, 0, -685-CoG);
pCylinder3->SetOrientation (0, 0, 0);
new NEWCTRL (pMainPlane, &Model.Aileron, 17.5, Degs2Rads(15), Degs2Rads(15) );
new NEWCTRL (pTailPlane1, &Model.Elevator, 30, Degs2Rads(16), Degs2Rads(32) );
new NEWCTRL (pTailPlane2, &Model.Elevator, 30, Degs2Rads(16), Degs2Rads(32) );
new NEWCTRL (pFin, &Model.Rudder, 25, Degs2Rads(20), Degs2Rads(20) );
Model.MControlLoss0 = 0.3;
Model.MControlLoss1 = 0.9;
new AERODEVICE (ControlledAC,pModel, AeroDevice::DT_FLAPS, 0.5, 0.15, -0.25, DEGS2RADS(2.5), 256, FLAPSUPDOWN, &adptr->acflaps);//RJS 14May98
new AERODEVICE (ControlledAC,pModel, AeroDevice::DT_SPEEDBRAKES, 0, 0.05, 0, 0, 256, SPEEDBRAKE, &adptr->acbreak);//RJS 14May98
new AERODEVICE (ControlledAC,pModel, AeroDevice::DT_GEAR, -0.1, 0.04, -0.01, 0, /*35*/128, GEARUPDOWN, NULL, 0);
PENGINE pEngine;
switch (Version)
{
case 1:
pEngine = new ENGINE (pModel, ET_JET, 22269, 11500, 0.00000005,
_CurveRsc.FindCurve ("MIG15", "JetMachFact"),
_CurveRsc.FindCurve ("F86E", "JetThrustRpm"),
_CurveRsc.FindCurve ("F86E", "JetWindMillDrag"),
_CurveRsc.FindCurve ("F86E", "JetWindMillRpm"));
break;
case 2:
pEngine = new ENGINE (pModel, ET_JET, 26476, 11500, 0.00000005,
_CurveRsc.FindCurve ("MIG15", "JetMachFact"),
_CurveRsc.FindCurve ("F86E", "JetThrustRpm"),
_CurveRsc.FindCurve ("F86E", "JetWindMillDrag"),
_CurveRsc.FindCurve ("F86E", "JetWindMillRpm"));
break;
}
PTHRUSTPOINT pThrust = new THRUSTPOINT (pModel, TT_JET, 0, 0, -1110-CoG, 0,0);
pThrust->SetEngine (pEngine);
pEngine->SetThrustPoint (pThrust);
Coords3D w,c1,c2;
FCRD CG; //Relative to the centre of the shape
CG.x = Model.ShapeCoG.x;
CG.y = Model.ShapeCoG.y;
CG.z = Model.ShapeCoG.z;
SHAPE.GetContactPoint(ControlledAC, CT_EYE, w, c1, c2);
Model.PilotEyePos.x = c1.X - CG.x;
Model.PilotEyePos.y = c1.Y - CG.y;
Model.PilotEyePos.z = c1.Z - CG.z;
SHAPE.GetContactPoint(ControlledAC, CT_WHLFRONT, w, c1, c2);
PGEAR pNose = new GEAR (pModel, NOSE);
pNose->SetDimensions (c1.X - CG.x, c1.Y - CG.y, c1.Z - CG.z, c2.X - CG.x, c2.Y - CG.y, c2.Z - CG.z);
pNose->SetSuspension (15000, 100000);
pNose->SetTyres (0.02, 1, 0);
SHAPE.GetContactPoint(ControlledAC, CT_WHLLEFT, w, c1, c2);
PGEAR pMainPort = new GEAR (pModel, PORT);
pMainPort->SetDimensions (c1.X - CG.x, c1.Y - CG.y, c1.Z - CG.z, c2.X - CG.x, c2.Y - CG.y, c2.Z - CG.z);
pMainPort->SetSuspension (55000, 500000);
pMainPort->SetTyres (0.02, 1, 12500);
SHAPE.GetContactPoint(ControlledAC, CT_WHLRIGHT, w, c1, c2);
PGEAR pMainStbd = new GEAR (pModel, STBD);
pMainStbd->SetDimensions (c1.X - CG.x, c1.Y - CG.y, c1.Z - CG.z, c2.X - CG.x, c2.Y - CG.y, c2.Z - CG.z);
pMainStbd->SetSuspension (55000, 500000);
pMainStbd->SetTyres (0.02, 1, 12500);
SHAPE.GetContactPoint(ControlledAC, CT_BACK, w, c1, c2); //FAKE GEAR TO STOP TAIL HITTING GROUND
PGEAR pTail = new GEAR (pModel, TAIL);
pTail->SetDimensions (c1.X - CG.x, c1.Y - CG.y - 10, c1.Z - CG.z, c2.X - CG.x, c2.Y - CG.y, c2.Z - CG.z);
pTail->SetSuspension (100000, 100000);
pTail->SetTyres (0.1, 1, 0);
pModel->SetMassInertias (ControlledAC, 7862, 10539, 4675);
Model.MaxG = 9;
Model.MinG = -5;
Model.ControlForce = 100; // Relative amount of force feedback
Model.BuffetForce = 100;
Model.PowerBoost = (FP)1.25;
Model.ContrailDuration = 1.0;
new MODELANIM (ControlledAC,MA_SURFACE, pModel, &ControlledAC->fly.aileron, &adptr->acaileronr);//RJS 14May98
new MODELANIM (ControlledAC,MA_SURFACE, pModel, &ControlledAC->fly.aileron, &adptr->acaileronl, 32767,-32768);//RJS 14May98
new MODELANIM (ControlledAC,MA_SURFACE, pModel, &ControlledAC->fly.elevator, &adptr->acelevator, 32767,-32768);//RJS 14May98
new MODELANIM (ControlledAC,MA_SURFACE, pModel, &ControlledAC->fly.rudder, &adptr->acrudder);//RJS 14May98
new MODELANIM (ControlledAC,MA_SUSPENSION, pNose, &adptr->aclegsuspf, 0, 255);
new MODELANIM (ControlledAC,MA_SUSPENSION, pMainPort, &adptr->aclegsuspl, 0, 255);
new MODELANIM (ControlledAC,MA_SUSPENSION, pMainStbd, &adptr->aclegsuspr, 0, 255);
Mig15_SetupAI(ControlledAC, Version);
}
void YAK9_Setup (AirStrucPtr const ControlledAC, ULong Version)
{
ClassPtr data = ControlledAC->classtype;
PMODEL pModel = ControlledAC->fly.pModel;
Model& Model = *ControlledAC->fly.pModel;
AircraftAnimData* adptr = (AircraftAnimData* )ControlledAC->Anim;
Model.Type = AT_YAK9;
FP CoG = -352;//26%MAC
PTHRUSTPOINT pThrust = new THRUSTPOINT (pModel, TT_PROP, 0, 0, -45-CoG, 0, 0);
PMAINPLANE pMainPlane = new MAINPLANE (pModel, 45750, 230, 345, 40000, 165, 215);
pMainPlane->SetPosition(140, -45, -350-CoG, 430, -20, -350-CoG);
pMainPlane->SetOrientation (1, 0, 5, 1, 0, 5);
pMainPlane->SetMaskAngle(0, 0, 0, 0);//-0.865, -1.089);//
pMainPlane->SetDragPolar (0.0163, 0.0724);
pMainPlane->SetCurves ("F80C", "Cl", "Cd", "CompCd0", "CompK", "Cm");
//DeadCode AMM 29Jun99 pMainPlane->StallAoa = Degs2Rads(0);//22.5);
//DeadCode AMM 29Jun99 pMainPlane->UnStallAoa = Degs2Rads(12.5);
pMainPlane->dCMdq = 0;
pMainPlane->dCMdp = 0;
pMainPlane->dCMdr = -1;
pMainPlane->SetSlipstream(pThrust, 50);
pMainPlane->buffetAoa0 = Degs2Rads(15);
pMainPlane->buffetAoa1 = Degs2Rads(20);
pMainPlane->buffetM0 = 0.95;
pMainPlane->buffetM1 = 1.05;
pMainPlane->ACMmaxaoa = Degs2Rads(17.5);
PSURFACE pTailPlane1 = new SURFACE (pModel, ST_PLANE, SD_TAILPLANE, 19000);//, 95);
pTailPlane1->SetPosition (75, 30, -825-CoG);
pTailPlane1->SetOrientation (0, 0, 0);
pTailPlane1->SetMaskAngle(0, 0);
pTailPlane1->SetCurves ("P51D", "TailCl", "COMM", "TailCd");//, "", "", "COMM", "CompK");
pTailPlane1->SetSlipstream(pThrust, 50);//84);
PSURFACE pTailPlane2 = new SURFACE (pModel, ST_PLANE, SD_TAILPLANE, 19000);//, 95);
pTailPlane2->SetPosition (-75, 30, -825-CoG);
pTailPlane2->SetOrientation (0, 0, 0);
pTailPlane2->SetMaskAngle(0, 0);
pTailPlane2->SetCurves ("P51D", "TailCl", "COMM", "TailCd");//, "", "", "COMM", "CompK");
pTailPlane2->SetSlipstream(pThrust, 50);//84);
PSURFACE pFin = new SURFACE (pModel, ST_PLANE, SD_FIN, 20800);//, 135);
pFin->SetPosition (0, 80, -875-CoG);
pFin->SetOrientation (0, 0, -90);
pFin->SetMaskAngle(0, 0);//-0.153);
pFin->SetCurves ("P51D", "FinCl", "COMM", "TailCd");//, "", "", "COMM", "CompK");
pFin->SetSlipstream(pThrust, 50);//90);
PCYLINDER pCylinder1 = new CYLINDER (pModel, 280, 85, 115);
pCylinder1->SetPosition(0, 0, -150-CoG);
pCylinder1->SetOrientation(0, 0, 0);
PCYLINDER pCylinder2 = new CYLINDER (pModel, 305, 90, 165);
pCylinder2->SetPosition(0, 0, -450-CoG);
pCylinder2->SetOrientation(0, 0, 0);
PCYLINDER pCylinder3 = new CYLINDER (pModel, 410, 50, 90);
pCylinder3->SetPosition(0, 0, -775-CoG);
pCylinder3->SetOrientation(0, 0, 0);
new NEWCTRL (pMainPlane, &Model.Aileron, 17.5, Degs2Rads(10), Degs2Rads(10) );
new NEWCTRL (pTailPlane1, &Model.Elevator, 30, Degs2Rads(20), Degs2Rads(30) );
new NEWCTRL (pTailPlane2, &Model.Elevator, 30, Degs2Rads(20), Degs2Rads(30) );
new NEWCTRL (pFin, &Model.Rudder, 40, Degs2Rads(30), Degs2Rads(30) );
new AERODEVICE (ControlledAC,pModel, AeroDevice::DT_FLAPS, 0.75, 0.15, -0.25, DEGS2RADS(5), 256, FLAPSUPDOWN, &adptr->acflaps);//RJS 14May98
new AERODEVICE (ControlledAC,pModel, AeroDevice::DT_GEAR, 0, 0.05, -0.01, 0, 4096/*128*/, GEARUPDOWN, NULL, 0);
PENGINE pEngine = new ENGINE (pModel, ET_PISTON);
pEngine->RotateDirection = 1; //Clockwise from behind
pEngine->IdleSpeed = RPM2RADSPERCSEC (500);
pEngine->MoI = 64e6;
pEngine->PropInertia.x = 10000000;
pEngine->PropInertia.y = 10000000;
pEngine->PropInertia.z = 20000000;
pEngine->BladeRadius = 170;
pEngine->BladeArea = 17000; // 4x AR=5 //7771;
pEngine->GearRatio = 0.479;
pEngine->pPower100 = _CurveRsc.FindCurve ("YAK9", "Power100");
pEngine->pPower0 = _CurveRsc.FindCurve ("F51D", "Power0");
pEngine->pPowerAlt = _CurveRsc.FindCurve ("F51D", "PowerAlt");
pEngine->pPowerAltSuper = _CurveRsc.FindCurve ("F51D", "PowerAltSuper"); //CSB
//DeadCode CSB 28/04/99 pEngine->pPropEff = _CurveRsc.FindCurve ("F51D", "PropEff");
//DeadCode CSB 28/04/99 pEngine->pPropTq = _CurveRsc.FindCurve ("F51D", "PropTq");
//DeadCode AMM 29Jun99 pEngine->EngineCount = 1;
pEngine->HighBlowerAlt = 457205; //High Gear Supercharger cuts in at 15000ft //CSB
pEngine->LowBlowerAlt = 411485; //High Gear Supercharger cuts out at 13500ft //CSB
pEngine->BlowerHigh = FALSE;
pEngine->p0 = 1590;
pEngine->T100 = 1185000;
pThrust->SetEngine (pEngine);
pEngine->SetThrustPoint (pThrust);
Coords3D w,c1,c2;
FCRD CG; //Relative to the centre of the shape
CG.x = Model.ShapeCoG.x;
CG.y = Model.ShapeCoG.y;
CG.z = Model.ShapeCoG.z;
SHAPE.GetContactPoint(ControlledAC, CT_EYE, w, c1, c2);
Model.PilotEyePos.x = c1.X - CG.x;
Model.PilotEyePos.y = c1.Y - CG.y;
Model.PilotEyePos.z = c1.Z - CG.z;
SHAPE.GetContactPoint(ControlledAC, CT_WHLBACK, w, c1, c2);
PGEAR pTail = new GEAR (pModel, TAIL);
pTail->SetDimensions (c1.X - CG.x, c1.Y - CG.y, c1.Z - CG.z, c2.X - CG.x, c2.Y - CG.y, c2.Z - CG.z);
pTail->SetSuspension (10000, 250000);
pTail->SetTyres (0.02, 0.75, 0);
SHAPE.GetContactPoint(ControlledAC, CT_WHLLEFT, w, c1, c2);
PGEAR pMainPort = new GEAR (pModel, PORT);
pMainPort->SetDimensions (c1.X - CG.x, c1.Y - CG.y, c1.Z - CG.z, c2.X - CG.x, c2.Y - CG.y, c2.Z - CG.z);
pMainPort->SetSuspension (40000, 1000000);
pMainPort->SetTyres (0.02, 0.75, 10000);
SHAPE.GetContactPoint(ControlledAC, CT_WHLRIGHT, w, c1, c2);
PGEAR pMainStbd = new GEAR (pModel, STBD);
pMainStbd->SetDimensions (c1.X - CG.x, c1.Y - CG.y, c1.Z - CG.z, c2.X - CG.x, c2.Y - CG.y, c2.Z - CG.z);
pMainStbd->SetSuspension (40000, 1000000);
pMainStbd->SetTyres (0.02, 0.75, 10000);
Model.ControlForce = 100; // Relative amount of force feedback
Model.BuffetForce = 100;
pModel->SetMassInertias (ControlledAC, 0.75*26500, 0.75*36800, 0.75*11000); //0.75 * F80
//DeadCode CSB 22/03/99 pModel->SetMassInertias (ControlledAC, 18460, 30000, 8100); //Don't know
//DeadCode CSB 22/03/99 pModel->SetMassInertias (ControlledAC, 26500, 36800, 11000); //F86E
Model.MaxG = 9;
Model.MinG = -5;
new MODELANIM (ControlledAC,MA_SURFACE, pModel, &ControlledAC->fly.aileron, &adptr->acaileronr);
new MODELANIM (ControlledAC,MA_SURFACE, pModel, &ControlledAC->fly.aileron, &adptr->acaileronl,32767,-32768);//RJS 14May98
new MODELANIM (ControlledAC,MA_SURFACE, pModel, &ControlledAC->fly.elevator, &adptr->acelevator,32767,-32768);//RJS 14May98
new MODELANIM (ControlledAC,MA_SURFACE, pModel, &ControlledAC->fly.rudder, &adptr->acrudder);
new MODELANIM (ControlledAC,MA_GENERICFP, pModel, &ControlledAC->fly.rpm, &adptr->acrpm, 0, 65536);
// new MODELANIM (ControlledAC,MA_GENERICFP, pModel, &pModel->Inst.Rpm1, &adptr->acrpm, 0, 65536);
new MODELANIM (ControlledAC,MA_SUSPENSION, pTail, &adptr->aclegsuspb, 0, 255);
new MODELANIM (ControlledAC,MA_SUSPENSION, pMainPort, &adptr->aclegsuspl, 0, 255);
new MODELANIM (ControlledAC,MA_SUSPENSION, pMainStbd, &adptr->aclegsuspr, 0, 255);
//DeadCode AMM 29Jun99 Model.CoordRudder = 768;
Model.PowerBoost = 1.4;
//DeadCode AMM 29Jun99 Model.ContrailBand = FEET2CM(10000);
Model.ContrailDuration = 1.0;
F51D_SetupAI (ControlledAC, Version);
}