void InstrumentWidget::setSurfaceType(int type) {
// we cannot do 3D without OpenGL
if (type == FULL3D && !isGLEnabled()) {
QMessageBox::warning(
this, "Mantid - Warning",
"OpenGL must be enabled to render the instrument in 3D.");
return;
}
if (type < RENDERMODE_SIZE) {
QApplication::setOverrideCursor(Qt::WaitCursor);
SurfaceType surfaceType = SurfaceType(type);
if (!m_instrumentActor)
return;
ProjectionSurface *surface = getSurface().get();
int peakLabelPrecision = 6;
bool showPeakRow = true;
bool showPeakLabels = true;
bool showPeakRelativeIntensity = true;
if (surface) {
peakLabelPrecision = surface->getPeakLabelPrecision();
showPeakRow = surface->getShowPeakRowsFlag();
showPeakLabels = surface->getShowPeakLabelsFlag();
} else {
QSettings settings;
settings.beginGroup(InstrumentWidgetSettingsGroup);
peakLabelPrecision = settings.value("PeakLabelPrecision", 2).toInt();
showPeakRow = settings.value("ShowPeakRows", true).toBool();
showPeakLabels = settings.value("ShowPeakLabels", true).toBool();
// By default this is should be off for now.
showPeakRelativeIntensity =
settings.value("ShowPeakRelativeIntensities", false).toBool();
settings.endGroup();
}
// Surface factory
// If anything throws during surface creation, store error message here
QString errorMessage;
try {
const auto &componentInfo = m_instrumentActor->componentInfo();
if (!componentInfo.hasSample()) {
throw InstrumentHasNoSampleError();
}
auto sample_pos = componentInfo.samplePosition();
auto axis = getSurfaceAxis(surfaceType);
m_maskTab->setDisabled(false);
// create the surface
if (surfaceType == FULL3D) {
m_renderTab->forceLayers(false);
if (m_instrumentActor->hasGridBank())
m_maskTab->setDisabled(true);
surface = new Projection3D(m_instrumentActor.get(),
getInstrumentDisplayWidth(),
getInstrumentDisplayHeight());
} else if (surfaceType <= CYLINDRICAL_Z) {
m_renderTab->forceLayers(true);
surface =
new UnwrappedCylinder(m_instrumentActor.get(), sample_pos, axis);
} else if (surfaceType <= SPHERICAL_Z) {
m_renderTab->forceLayers(true);
surface =
new UnwrappedSphere(m_instrumentActor.get(), sample_pos, axis);
} else // SIDE_BY_SIDE
{
m_renderTab->forceLayers(true);
surface = new PanelsSurface(m_instrumentActor.get(), sample_pos, axis);
}
} catch (InstrumentHasNoSampleError &) {
QApplication::restoreOverrideCursor();
throw;
} catch (std::exception &e) {
errorMessage = e.what();
} catch (...) {
errorMessage = "Unknown exception thrown.";
}
if (!errorMessage.isNull()) {
// if exception was thrown roll back to the current surface type.
QApplication::restoreOverrideCursor();
QMessageBox::critical(
this, "MantidPlot - Error",
"Surface cannot be created because of an exception:\n\n " +
errorMessage + "\n\nPlease select a different surface type.");
// if suface change was initialized by the GUI this should ensure its
// consistency
emit surfaceTypeChanged(m_surfaceType);
return;
}
// end Surface factory
m_surfaceType = surfaceType;
surface->setPeakLabelPrecision(peakLabelPrecision);
surface->setShowPeakRowsFlag(showPeakRow);
surface->setShowPeakLabelsFlag(showPeakLabels);
surface->setShowPeakRelativeIntensityFlag(showPeakRelativeIntensity);
// set new surface
setSurface(surface);
// init tabs with new surface
foreach (InstrumentWidgetTab *tab, m_tabs) { tab->initSurface(); }
connect(surface, SIGNAL(executeAlgorithm(Mantid::API::IAlgorithm_sptr)),
this, SLOT(executeAlgorithm(Mantid::API::IAlgorithm_sptr)));
connect(surface, SIGNAL(updateInfoText()), this, SLOT(updateInfoText()),
Qt::QueuedConnection);
QApplication::restoreOverrideCursor();
}
void InstrumentWindow::setSurfaceType(int type) {
// we cannot do 3D without OpenGL
if (type == FULL3D && !isGLEnabled()) {
QMessageBox::warning(
this, "Mantid - Warning",
"OpenGL must be enabled to render the instrument in 3D.");
return;
}
if (type < RENDERMODE_SIZE) {
QApplication::setOverrideCursor(Qt::WaitCursor);
SurfaceType surfaceType = SurfaceType(type);
if (!m_instrumentActor)
return;
ProjectionSurface *surface = getSurface().get();
int peakLabelPrecision = 6;
bool showPeakRow = true;
bool showPeakLabels = true;
if (surface) {
peakLabelPrecision = surface->getPeakLabelPrecision();
showPeakRow = surface->getShowPeakRowsFlag();
showPeakLabels = surface->getShowPeakLabelsFlag();
} else {
QSettings settings;
peakLabelPrecision =
settings.value("Mantid/InstrumentWindow/PeakLabelPrecision", 2)
.toInt();
showPeakRow =
settings.value("Mantid/InstrumentWindow/ShowPeakRows", true).toBool();
showPeakLabels =
settings.value("Mantid/InstrumentWindow/ShowPeakLabels", true)
.toBool();
}
// Surface factory
// If anything throws during surface creation, store error message here
QString errorMessage;
try {
Mantid::Geometry::Instrument_const_sptr instr =
m_instrumentActor->getInstrument();
Mantid::Geometry::IComponent_const_sptr sample = instr->getSample();
if (!sample) {
throw InstrumentHasNoSampleError();
}
Mantid::Kernel::V3D sample_pos = sample->getPos();
Mantid::Kernel::V3D axis;
// define the axis
if (surfaceType == SPHERICAL_Y || surfaceType == CYLINDRICAL_Y) {
axis = Mantid::Kernel::V3D(0, 1, 0);
} else if (surfaceType == SPHERICAL_Z || surfaceType == CYLINDRICAL_Z) {
axis = Mantid::Kernel::V3D(0, 0, 1);
} else if (surfaceType == SPHERICAL_X || surfaceType == CYLINDRICAL_X) {
axis = Mantid::Kernel::V3D(1, 0, 0);
} else // SIDE_BY_SIDE
{
axis = Mantid::Kernel::V3D(0, 0, 1);
}
// create the surface
if (surfaceType == FULL3D) {
surface =
new Projection3D(m_instrumentActor, getInstrumentDisplayWidth(),
getInstrumentDisplayHeight());
} else if (surfaceType <= CYLINDRICAL_Z) {
surface = new UnwrappedCylinder(m_instrumentActor, sample_pos, axis);
} else if (surfaceType <= SPHERICAL_Z) {
surface = new UnwrappedSphere(m_instrumentActor, sample_pos, axis);
} else // SIDE_BY_SIDE
{
surface = new PanelsSurface(m_instrumentActor, sample_pos, axis);
}
} catch (InstrumentHasNoSampleError &) {
QApplication::restoreOverrideCursor();
throw;
} catch (std::exception &e) {
errorMessage = e.what();
} catch (...) {
errorMessage = "Unknown exception thrown.";
}
if (!errorMessage.isNull()) {
// if exception was thrown roll back to the current surface type.
QApplication::restoreOverrideCursor();
QMessageBox::critical(
this, "MantidPlot - Error",
"Surface cannot be created because of an exception:\n\n " +
errorMessage + "\n\nPlease select a different surface type.");
// if suface change was initialized by the GUI this should ensure its
// consistency
emit surfaceTypeChanged(m_surfaceType);
return;
}
// end Surface factory
m_surfaceType = surfaceType;
surface->setPeakLabelPrecision(peakLabelPrecision);
surface->setShowPeakRowsFlag(showPeakRow);
surface->setShowPeakLabelsFlag(showPeakLabels);
// set new surface
setSurface(surface);
// init tabs with new surface
foreach (InstrumentWindowTab *tab, m_tabs) {
tab->initSurface();
}
// connect(surface,SIGNAL(multipleDetectorsSelected(QList<int>&)),this,SLOT(multipleDetectorsSelected(QList<int>&)));
connect(surface, SIGNAL(executeAlgorithm(Mantid::API::IAlgorithm_sptr)),
this, SIGNAL(execMantidAlgorithm(Mantid::API::IAlgorithm_sptr)));
connect(surface, SIGNAL(updateInfoText()), this, SLOT(updateInfoText()),
Qt::QueuedConnection);
QApplication::restoreOverrideCursor();
}