void KReplaceDialogPrivate::_k_slotOk()
{
// If regex and backrefs are enabled, do a sanity check.
if ( q->KFindDialog::d->regExp->isChecked() && q->KFindDialog::d->backRef->isChecked() )
{
QRegExp r ( q->pattern() );
int caps = r.numCaptures();
QRegExp check(QString("((?:\\\\)+)(\\d+)"));
int p = 0;
QString rep = q->replacement();
while ( (p = check.indexIn( rep, p ) ) > -1 )
{
if ( check.cap(1).length()%2 && check.cap(2).toInt() > caps )
{
KMessageBox::information( q, i18n(
"Your replacement string is referencing a capture greater than '\\%1', ", caps ) +
( caps ?
i18np("but your pattern only defines 1 capture.",
"but your pattern only defines %1 captures.", caps ) :
i18n("but your pattern defines no captures.") ) +
i18n("\nPlease correct.") );
return; // abort OKing
}
p += check.matchedLength();
}
}
q->KFindDialog::d->_k_slotOk();
q->KFindDialog::d->replace->addToHistory(q->replacement());
}
/**
* \brief stepwidth is always relative (it is a double in case axistype == datetime)
*
* @param stepwidth to calculate the next step ( must be convertible to int or double)
*/
void evePosCalc::setStepWidth(QString stepwidth) {
bool ok=false;
if (axisType == eveDateTimeT){
// stepwidth is a double, we accept a number or HH:mm:ss.mmm format
QRegExp regex = QRegExp("^(\\d+):(\\d+):([\\d.]+)$");
QRegExp duration = QRegExp("^P(\\d+)Y(\\d+)M(\\d+)DT(\\d+)H(\\d+)M([\\d.]+)S$");
if (stepwidth.contains(regex) && (regex.numCaptures() == 3)){
QStringList list = regex.capturedTexts();
int hours = list.at(1).toInt(&ok);
int minutes = list.at(2).toInt(&ok);
double seconds = list.at(3).toDouble(&ok) + (double)(60*minutes + 3600*hours);
stepWidth.setValue(seconds);
}
else if (stepwidth.contains(duration) && (duration.numCaptures() == 6)){
QStringList list = duration.capturedTexts();
if ((list.at(1).toInt(&ok)!= 0) || (list.at(2).toInt(&ok)!= 0) || (list.at(3).toInt(&ok)!= 0))
sendError(MINOR, QString("ISO Duration not implemented for Y/M/D (%1)").arg(stepwidth));
double seconds = list.at(4).toDouble(&ok)*3600 + list.at(5).toDouble(&ok)*60 + list.at(6).toDouble(&ok);
stepWidth.setValue(seconds);
}
else {
stepWidth.setValue(stepwidth.toDouble(&ok));
}
sendError(DEBUG, QString("set stepwidth to %1 (%2)").arg(stepWidth.toDouble(&ok)).arg(stepwidth));
}
else if ((stepmode == MULTIPLY) || (axisType == eveDOUBLE)){
stepWidth.setValue(stepwidth.toDouble(&ok));
}
else if (axisType == eveINT){
stepWidth.setValue(stepwidth.toInt(&ok));
}
else if (axisType == eveStringT){
stepWidth.setValue(stepwidth.toInt(&ok));
}
if (!ok) sendError(ERROR, QString("unable to set %1 as stepwidth").arg(stepwidth));
checkValues();
}
/**
*
* @param position start or end position relative or absolute
* @param posVariant the variant startpos or endpos
*/
void evePosCalc::setPos(QString position, eveVariant* posVariant) {
if ((axisType == eveDateTimeT) && absolute){
// absolute: we accept only "yyyy-MM-dd HH:mm:ss(.zzz)" or "HH:mm:ss(.zzz)" format
if (!position.contains(QRegExp("^\\d{4}-\\d{1,2}-\\d{1,2} \\d{1,2}:\\d{1,2}:\\d{1,2}([.]\\d{1,3})?$")) &&
!position.contains(QRegExp("^\\d{1,2}:\\d{1,2}:\\d{1,2}([.]\\d{1,3})?$"))){
sendError(ERROR, QString("invalid absolute datetime format %1, using current time").arg(position));
posVariant->setValue(QDateTime::currentDateTime());
return;
}
}
else if ((axisType == eveDateTimeT) && !absolute){
// relative: we accept an ISO duration format or obsolete HH:mm:ss
QRegExp duration = QRegExp("^P(\\d+)Y(\\d+)M(\\d+)DT(\\d+)H(\\d+)M([\\d.]+)S$");
if (position.contains(duration) && (duration.numCaptures() == 6)){
bool ok;
QStringList list = duration.capturedTexts();
if ((list.at(1).toInt(&ok)!= 0) || (list.at(2).toInt(&ok)!= 0) || (list.at(3).toInt(&ok)!= 0))
sendError(MINOR, QString("ISO Duration not implemented for Y/M/D (%1)").arg(position));
double seconds = list.at(4).toDouble(&ok)*3600 + list.at(5).toDouble(&ok)*60 + list.at(6).toDouble(&ok);
posVariant->setValue(seconds);
return ;
}
// obsolete relative format accepts only a number for seconds or HH:mm:ss format
else if (position.contains(QRegExp("^\\d{1,2}:\\d{1,2}:\\d{1,2}([.]\\d{1,3})?$"))){
// obsolete relative format accepts only a number for seconds or HH:mm:ss format
QString format;
if (position.contains("."))
format = "h:m:s.z";
else
format = "h:m:s";
posVariant->setValue(QDateTime::fromString(position,format));
return;
}
else {
sendError(ERROR, QString("invalid relative datetime format %1, using 0").arg(position));
posVariant->setValue(QDateTime());
return;
}
}
if (!posVariant->setValue(position))
sendError(ERROR, QString("unable to set %1 as start/end position").arg(position));
checkValues();
return;
}
bool MetricAggregator::importRide(QDir path, RideFile *ride, QString fileName, unsigned long fingerprint, bool modify)
{
SummaryMetrics *summaryMetric = new SummaryMetrics();
QFile file(path.absolutePath() + "/" + fileName);
QRegExp rx = RideFileFactory::instance().rideFileRegExp();
if (!rx.exactMatch(fileName)) {
return false; // not a ridefile!
}
summaryMetric->setFileName(fileName);
assert(rx.numCaptures() == 7);
QDate date(rx.cap(1).toInt(), rx.cap(2).toInt(),rx.cap(3).toInt());
QTime time(rx.cap(4).toInt(), rx.cap(5).toInt(),rx.cap(6).toInt());
QDateTime dateTime(date, time);
summaryMetric->setRideDate(dateTime);
summaryMetric->setId(ride->id());
const RideMetricFactory &factory = RideMetricFactory::instance();
QStringList metrics;
for (int i = 0; i < factory.metricCount(); ++i)
metrics << factory.metricName(i);
// compute all the metrics
QHash<QString, RideMetricPtr> computed = RideMetric::computeMetrics(main, ride, zones, hrzones, metrics);
// get metrics into summaryMetric QMap
for(int i = 0; i < factory.metricCount(); ++i) {
// check for override
summaryMetric->setForSymbol(factory.metricName(i), computed.value(factory.metricName(i))->value(true));
}
// what color will this ride be?
QColor color = colorEngine->colorFor(ride->getTag(main->rideMetadata()->getColorField(), ""));
dbaccess->importRide(summaryMetric, ride, color, fingerprint, modify);
#ifdef GC_HAVE_LUCENE
main->lucene->importRide(summaryMetric, ride, color, fingerprint, modify);
#endif
delete summaryMetric;
return true;
}
void TCommandLine::handleTabCompletion( bool direction )
{
if( ( mTabCompletionCount < 0 ) || ( mUserKeptOnTyping ) )
{
mTabCompletionTyped = toPlainText();
if( mTabCompletionTyped.size() == 0 ) return;
mUserKeptOnTyping = false;
mTabCompletionCount = -1;
}
int amount = mpHost->mpConsole->buffer.size();
if( amount > 500 ) amount = 500;
QStringList bufferList = mpHost->mpConsole->buffer.getEndLines( amount );
QString buffer = bufferList.join(" ");
buffer.replace(QChar( 0x21af ), "\n");
buffer.replace(QChar('\n'), " " );
QStringList wordList = buffer.split( QRegExp("\\b"), QString::SkipEmptyParts );
if( direction )
{
mTabCompletionCount++;
}
else
{
mTabCompletionCount--;
}
if( wordList.size() > 0 )
{
if( mTabCompletionTyped.endsWith(" ") ) return;
QString lastWord;
QRegExp reg = QRegExp("\\b(\\w+)$");
int typePosition = reg.indexIn( mTabCompletionTyped );
if( reg.numCaptures() >= 1 )
lastWord = reg.cap( 1 );
else
lastWord = "";
QStringList filterList = wordList.filter( QRegExp( "^"+lastWord+"\\w+",Qt::CaseInsensitive ) );
if( filterList.size() < 1 ) return;
int offset = 0;
for( ; ; )
{
QString tmp = filterList.back();
filterList.removeAll( tmp );
filterList.insert( offset, tmp );
++offset;
if( offset >= filterList.size() ) break;
}
if( filterList.size() > 0 )
{
if( mTabCompletionCount >= filterList.size() ) mTabCompletionCount = filterList.size()-1;
if( mTabCompletionCount < 0 ) mTabCompletionCount = 0;
QString proposal = filterList[mTabCompletionCount];
QString userWords = mTabCompletionTyped.left( typePosition );
setPlainText( QString( userWords + proposal ).trimmed() );
moveCursor( QTextCursor::End, QTextCursor::MoveAnchor );
mTabCompletionOld = toPlainText();
}
}
}
QString ImageImporter::replaceStrings(const QString& src, const QFileInfo* fileinfo, QRegExp regexp )
{
QString retval = src;
//general replacement for keys of the form $qdt-XXX where XXX is one of the generic QDateTime
// format strings
QStringList qdt;
qdt << "dddd" << "ddd" << "dd" << "d"
<< "MMMM" << "MMM" << "MM" << "M"
<< "yyyy" << "yy"
<< "hh" << "h" << "mm" << "m"
<< "ss" << "s" << "zzz" << "z"
<< "AP" << "ap";
QStringList dateTimeVars;
QStringList dateTimeRepl;
dateTimeVars << "year" << "month" << "day" << "hour" << "min" << "sec";
dateTimeRepl << "yyyy" << "MM" << "dd" << "hh" << "mm" << "ss" ;
for (QStringList::iterator it = qdt.begin(); it != qdt.end(); ++it) {
dateTimeVars << QString("$qdt-%1").arg(*it);
dateTimeRepl << QString(*it);
}
if (fileinfo == 0L) {
QDateTime dt = QDateTime::currentDateTime();
if (dt.isValid()) {
retval = retval.replace("$year" , dt.toString("yyyy"));
retval = retval.replace("$month", dt.toString("MM"));
retval = retval.replace("$day" , dt.toString("dd"));
retval = retval.replace("$hour" , dt.toString("hh"));
retval = retval.replace("$min" , dt.toString("mm"));
retval = retval.replace("$sec" , dt.toString("ss"));
for (QStringList::iterator it = qdt.begin(); it != qdt.end(); ++it) {
retval = retval.replace(QString("$qdt-%1").arg(*it) , dt.toString(*it));
}
}
retval = retval.replace("$ext" , "[ext]");
retval = retval.replace("$model" , "[model]");
retval = retval.replace("$make" , "[make]");
retval = retval.replace("$0" , "[orig-filename]");
for (int i = 1; i < 10; ++i) {
retval = retval.replace(QString("$%1").arg(i) , QString("[capture-%1]").arg(i));
}
} else {
//replace the captures ...
if (regexp.exactMatch(fileinfo->fileName())) {
for (int i = 0; i <= regexp.numCaptures(); ++i) {
retval = retval.replace(QString("$%1").arg(i) , regexp.cap(i));
}
}
// we begin with model, as it is a nice way to find out, if exif data is available
// model
QString model = getExifData(fileinfo->absFilePath(), EXIF_TAG_MODEL);
// I assume: No exifdata available if model is not set
if (model.isEmpty()) {
return "";
}
retval = retval.replace("$model" , model);
// make
QString make = getExifData(fileinfo->absFilePath(), EXIF_TAG_MAKE);
retval = retval.replace("$make" , make);
// dateTime original
QDateTime dt = QDateTime::fromString(getExifData(fileinfo->absFilePath(), EXIF_TAG_DATE_TIME_ORIGINAL)
.replace(":", "-"), Qt::ISODate);
if (dt.isValid()) {
retval = retval.replace("$year" , dt.toString("yyyy"));
retval = retval.replace("$month", dt.toString("MM"));
retval = retval.replace("$day" , dt.toString("dd"));
retval = retval.replace("$hour" , dt.toString("hh"));
retval = retval.replace("$min" , dt.toString("mm"));
retval = retval.replace("$sec" , dt.toString("ss"));
for (QStringList::iterator it = qdt.begin(); it != qdt.end(); ++it) {
retval = retval.replace(QString("$qdt-%1").arg(*it) , dt.toString(*it));
}
}
// extension
int pos = fileinfo->fileName().findRev('.') + 1;
if (pos > 0) {
retval = retval.replace("$ext" , fileinfo->fileName().mid(pos));
}
}
//remove all unreplaced $variables
if (retval.contains("$") ) {
///@todo remove all $variables that could not be replaced
}
//finally remove multiple slashes
while (retval.contains("//")) {
retval = retval.replace("//", "/");
}
return retval;
}