NS_IMETHODIMP nsDeviceContextSpecQt::GetSurfaceForPrinter(
gfxASurface** aSurface)
{
NS_ENSURE_ARG_POINTER(aSurface);
*aSurface = nullptr;
double width, height;
mPrintSettings->GetEffectivePageSize(&width, &height);
// If we're in landscape mode, we'll be rotating the output --
// need to swap width & height.
int32_t orientation;
mPrintSettings->GetOrientation(&orientation);
if (nsIPrintSettings::kLandscapeOrientation == orientation) {
double tmp = width;
width = height;
height = tmp;
}
// convert twips to points
width /= TWIPS_PER_POINT_FLOAT;
height /= TWIPS_PER_POINT_FLOAT;
DO_PR_DEBUG_LOG(("\"%s\", %f, %f\n", mPath, width, height));
QTemporaryFile file;
if(!file.open()) {
return NS_ERROR_GFX_PRINTER_COULD_NOT_OPEN_FILE;
}
file.setAutoRemove(false);
nsresult rv = NS_NewNativeLocalFile(
nsDependentCString(file.fileName().toUtf8().constData()),
false,
getter_AddRefs(mSpoolFile));
if (NS_FAILED(rv)) {
file.remove();
return NS_ERROR_GFX_PRINTER_COULD_NOT_OPEN_FILE;
}
mSpoolName = file.fileName().toUtf8().constData();
mSpoolFile->SetPermissions(0600);
nsCOMPtr<nsIFileOutputStream> stream =
do_CreateInstance("@mozilla.org/network/file-output-stream;1");
rv = stream->Init(mSpoolFile, -1, -1, 0);
if (NS_FAILED(rv))
return rv;
int16_t format;
mPrintSettings->GetOutputFormat(&format);
nsRefPtr<gfxASurface> surface;
gfxSize surfaceSize(width, height);
if (format == nsIPrintSettings::kOutputFormatNative) {
if (mIsPPreview) {
// There is nothing to detect on Print Preview, use PS.
// TODO: implement for Qt?
//format = nsIPrintSettings::kOutputFormatPS;
return NS_ERROR_NOT_IMPLEMENTED;
}
format = nsIPrintSettings::kOutputFormatPDF;
}
if (format == nsIPrintSettings::kOutputFormatPDF) {
surface = new gfxPDFSurface(stream, surfaceSize);
} else {
return NS_ERROR_NOT_IMPLEMENTED;
}
NS_ABORT_IF_FALSE(surface, "valid address expected");
surface.swap(*aSurface);
return NS_OK;
}
void runRdb( uint flags )
{
// Obtain the application palette that is about to be set.
bool exportColors = flags & KRdbExportColors;
bool exportQtColors = flags & KRdbExportQtColors;
bool exportQtSettings = flags & KRdbExportQtSettings;
bool exportXftSettings = flags & KRdbExportXftSettings;
bool exportGtkTheme = flags & KRdbExportGtkTheme;
KSharedConfigPtr kglobalcfg = KSharedConfig::openConfig( QStringLiteral("kdeglobals") );
KConfigGroup kglobals(kglobalcfg, "KDE");
QPalette newPal = KColorScheme::createApplicationPalette(kglobalcfg);
QTemporaryFile tmpFile;
if (!tmpFile.open())
{
qDebug() << "Couldn't open temp file";
exit(0);
}
KConfigGroup generalCfgGroup(kglobalcfg, "General");
QString gtkTheme;
if (kglobals.hasKey("widgetStyle"))
gtkTheme = kglobals.readEntry("widgetStyle");
else
gtkTheme = QStringLiteral("oxygen");
createGtkrc( exportColors, newPal, exportGtkTheme, gtkTheme, 1 );
createGtkrc( exportColors, newPal, exportGtkTheme, gtkTheme, 2 );
// Export colors to non-(KDE/Qt) apps (e.g. Motif, GTK+ apps)
if (exportColors)
{
KConfigGroup g(KSharedConfig::openConfig(), "WM");
QString preproc;
QColor backCol = newPal.color( QPalette::Active, QPalette::Background );
addColorDef(preproc, "FOREGROUND" , newPal.color( QPalette::Active, QPalette::Foreground ) );
addColorDef(preproc, "BACKGROUND" , backCol);
addColorDef(preproc, "HIGHLIGHT" , backCol.light(100+(2*KColorScheme::contrast()+4)*16/1));
addColorDef(preproc, "LOWLIGHT" , backCol.dark(100+(2*KColorScheme::contrast()+4)*10));
addColorDef(preproc, "SELECT_BACKGROUND" , newPal.color( QPalette::Active, QPalette::Highlight));
addColorDef(preproc, "SELECT_FOREGROUND" , newPal.color( QPalette::Active, QPalette::HighlightedText));
addColorDef(preproc, "WINDOW_BACKGROUND" , newPal.color( QPalette::Active, QPalette::Base ) );
addColorDef(preproc, "WINDOW_FOREGROUND" , newPal.color( QPalette::Active, QPalette::Text ) );
addColorDef(preproc, "INACTIVE_BACKGROUND", g.readEntry("inactiveBackground", QColor(224, 223, 222)));
addColorDef(preproc, "INACTIVE_FOREGROUND", g.readEntry("inactiveBackground", QColor(224, 223, 222)));
addColorDef(preproc, "ACTIVE_BACKGROUND" , g.readEntry("activeBackground", QColor(48, 174, 232)));
addColorDef(preproc, "ACTIVE_FOREGROUND" , g.readEntry("activeBackground", QColor(48, 174, 232)));
//---------------------------------------------------------------
tmpFile.write( preproc.toLatin1(), preproc.length() );
QStringList list;
const QStringList adPaths = QStandardPaths::locateAll(QStandardPaths::GenericDataLocation,
QStringLiteral("kdisplay/app-defaults/"), QStandardPaths::LocateDirectory);
for (QStringList::ConstIterator it = adPaths.constBegin(); it != adPaths.constEnd(); ++it) {
QDir dSys( *it );
if ( dSys.exists() ) {
dSys.setFilter( QDir::Files );
dSys.setSorting( QDir::Name );
dSys.setNameFilters(QStringList(QStringLiteral("*.ad")));
list += dSys.entryList();
}
}
for (QStringList::ConstIterator it = list.constBegin(); it != list.constEnd(); ++it)
copyFile(tmpFile, QStandardPaths::locate(QStandardPaths::GenericDataLocation, "kdisplay/app-defaults/"+(*it)), true);
}
// Merge ~/.Xresources or fallback to ~/.Xdefaults
QString homeDir = QDir::homePath();
QString xResources = homeDir + "/.Xresources";
// very primitive support for ~/.Xresources by appending it
if ( QFile::exists( xResources ) )
copyFile(tmpFile, xResources, true);
else
copyFile(tmpFile, homeDir + "/.Xdefaults", true);
// Export the Xcursor theme & size settings
KConfigGroup mousecfg(KSharedConfig::openConfig( QStringLiteral("kcminputrc") ), "Mouse" );
QString theme = mousecfg.readEntry("cursorTheme", QString());
QString size = mousecfg.readEntry("cursorSize", QString());
QString contents;
if (!theme.isNull())
contents = "Xcursor.theme: " + theme + '\n';
if (!size.isNull())
contents += "Xcursor.size: " + size + '\n';
if (exportXftSettings)
{
if (generalCfgGroup.hasKey("XftAntialias"))
{
contents += QLatin1String("Xft.antialias: ");
if(generalCfgGroup.readEntry("XftAntialias", true))
contents += QLatin1String("1\n");
else
contents += QLatin1String("0\n");
}
if (generalCfgGroup.hasKey("XftHintStyle"))
{
QString hintStyle = generalCfgGroup.readEntry("XftHintStyle", "hintmedium");
contents += QLatin1String("Xft.hinting: ");
if(hintStyle.isEmpty())
contents += QLatin1String("-1\n");
else
{
if(hintStyle!=QLatin1String("hintnone"))
contents += QLatin1String("1\n");
else
contents += QLatin1String("0\n");
contents += "Xft.hintstyle: " + hintStyle + '\n';
}
}
if (generalCfgGroup.hasKey("XftSubPixel"))
{
QString subPixel = generalCfgGroup.readEntry("XftSubPixel");
if(!subPixel.isEmpty())
contents += "Xft.rgba: " + subPixel + '\n';
}
KConfig _cfgfonts( QStringLiteral("kcmfonts") );
KConfigGroup cfgfonts(&_cfgfonts, "General");
if( cfgfonts.readEntry( "forceFontDPI", 0 ) != 0 )
contents += "Xft.dpi: " + cfgfonts.readEntry( "forceFontDPI" ) + '\n';
else
{
KProcess proc;
proc << QStringLiteral("xrdb") << QStringLiteral("-quiet") << QStringLiteral("-remove") << QStringLiteral("-nocpp");
proc.start();
if (proc.waitForStarted())
{
proc.write( QByteArray( "Xft.dpi\n" ) );
proc.closeWriteChannel();
proc.waitForFinished();
}
}
}
if (contents.length() > 0)
tmpFile.write( contents.toLatin1(), contents.length() );
tmpFile.flush();
KProcess proc;
#ifndef NDEBUG
proc << QStringLiteral("xrdb") << QStringLiteral("-merge") << tmpFile.fileName();
#else
proc << "xrdb" << "-quiet" << "-merge" << tmpFile.fileName();
#endif
proc.execute();
applyGtkStyles(exportColors, 1);
applyGtkStyles(exportColors, 2);
/* Qt exports */
if ( exportQtColors || exportQtSettings )
{
QSettings* settings = new QSettings(QStringLiteral("Trolltech"));
if ( exportQtColors )
applyQtColors( kglobalcfg, *settings, newPal ); // For kcmcolors
if ( exportQtSettings )
applyQtSettings( kglobalcfg, *settings ); // For kcmstyle
delete settings;
QApplication::flush();
#if HAVE_X11
if (qApp->platformName() == QStringLiteral("xcb")) {
// We let KIPC take care of ourselves, as we are in a KDE app with
// QApp::setDesktopSettingsAware(false);
// Instead of calling QApp::x11_apply_settings() directly, we instead
// modify the timestamp which propagates the settings changes onto
// Qt-only apps without adversely affecting ourselves.
// Cheat and use the current timestamp, since we just saved to qtrc.
QDateTime settingsstamp = QDateTime::currentDateTime();
static Atom qt_settings_timestamp = 0;
if (!qt_settings_timestamp) {
QString atomname(QStringLiteral("_QT_SETTINGS_TIMESTAMP_"));
atomname += XDisplayName( 0 ); // Use the $DISPLAY envvar.
qt_settings_timestamp = XInternAtom( QX11Info::display(), atomname.toLatin1(), False);
}
QBuffer stamp;
QDataStream s(&stamp.buffer(), QIODevice::WriteOnly);
s << settingsstamp;
XChangeProperty( QX11Info::display(), QX11Info::appRootWindow(), qt_settings_timestamp,
qt_settings_timestamp, 8, PropModeReplace,
(unsigned char*) stamp.buffer().data(),
stamp.buffer().size() );
QApplication::flush();
}
#endif
}
//Legacy support:
//Try to sync kde4 settings with ours
Kdelibs4Migration migration;
//kf5 congig groups for general and icons
KConfigGroup generalGroup(kglobalcfg, "General");
KConfigGroup iconsGroup(kglobalcfg, "Icons");
const QString colorSchemeName = generalGroup.readEntry("ColorScheme", QString());
//if no valid color scheme saved, something weird is going on, abort
if (colorSchemeName.isEmpty()) {
return;
}
//fix filename, copied from ColorsCM::saveScheme()
QString colorSchemeFilename = colorSchemeName;
colorSchemeFilename.remove('\''); // So Foo's does not become FooS
QRegExp fixer(QStringLiteral("[\\W,.-]+(.?)"));
int offset;
while ((offset = fixer.indexIn(colorSchemeFilename)) >= 0)
colorSchemeFilename.replace(offset, fixer.matchedLength(), fixer.cap(1).toUpper());
colorSchemeFilename.replace(0, 1, colorSchemeFilename.at(0).toUpper());
//clone the color scheme
QString src = QStandardPaths::locate(QStandardPaths::GenericDataLocation, "color-schemes/" + colorSchemeFilename + ".colors");
QString dest = migration.saveLocation("data", QStringLiteral("color-schemes")) + colorSchemeName + ".colors";
QFile::remove(dest);
QFile::copy(src, dest);
//Apply the color scheme
QString configFilePath = migration.saveLocation("config") + "kdeglobals";
if (configFilePath.isEmpty()) {
return;
}
KConfig kde4config(configFilePath, KConfig::SimpleConfig);
KConfigGroup kde4generalGroup(&kde4config, "General");
kde4generalGroup.writeEntry("ColorScheme", colorSchemeName);
//fonts
QString font = generalGroup.readEntry("font", QString());
if (!font.isEmpty()) {
kde4generalGroup.writeEntry("font", font);
}
font = generalGroup.readEntry("desktopFont", QString());
if (!font.isEmpty()) {
kde4generalGroup.writeEntry("desktopFont", font);
}
font = generalGroup.readEntry("menuFont", QString());
if (!font.isEmpty()) {
kde4generalGroup.writeEntry("menuFont", font);
}
font = generalGroup.readEntry("smallestReadableFont", QString());
if (!font.isEmpty()) {
kde4generalGroup.writeEntry("smallestReadableFont", font);
}
font = generalGroup.readEntry("taskbarFont", QString());
if (!font.isEmpty()) {
kde4generalGroup.writeEntry("taskbarFont", font);
}
font = generalGroup.readEntry("toolBarFont", QString());
if (!font.isEmpty()) {
kde4generalGroup.writeEntry("toolBarFont", font);
}
//TODO: does exist any way to check if a qt4 widget style is present from a qt5 app?
//kde4generalGroup.writeEntry("widgetStyle", "qtcurve");
kde4generalGroup.sync();
KConfigGroup kde4IconGroup(&kde4config, "Icons");
QString iconTheme = iconsGroup.readEntry("Theme", QString());
if (!iconTheme.isEmpty()) {
kde4IconGroup.writeEntry("Theme", iconTheme);
}
kde4IconGroup.sync();
//copy all the groups in the color scheme in kdeglobals
KSharedConfigPtr kde4ColorConfig = KSharedConfig::openConfig(src, KConfig::SimpleConfig);
foreach (const QString &grp, kde4ColorConfig->groupList()) {
KConfigGroup cg(kde4ColorConfig, grp);
KConfigGroup cg2(&kde4config, grp);
cg.copyTo(&cg2);
}
//widgets settings
KConfigGroup kglobals4(&kde4config, "KDE");
kglobals4.writeEntry("ShowIconsInMenuItems", kglobals.readEntry("ShowIconsInMenuItems", true));
kglobals4.writeEntry("ShowIconsOnPushButtons", kglobals.readEntry("ShowIconsOnPushButtons", true));
kglobals4.writeEntry("contrast", kglobals.readEntry("contrast", 4));
//FIXME: this should somehow check if the kde4 version of the style is installed
kde4generalGroup.writeEntry("widgetStyle", kglobals.readEntry("widgetStyle", "breeze"));
//toolbar style
KConfigGroup toolbars4(&kde4config, "Toolbar style");
KConfigGroup toolbars5(kglobalcfg, "Toolbar style");
toolbars4.writeEntry("ToolButtonStyle", toolbars5.readEntry("ToolButtonStyle", "TextBesideIcon"));
toolbars4.writeEntry("ToolButtonStyleOtherToolbars", toolbars5.readEntry("ToolButtonStyleOtherToolbars", "TextBesideIcon"));
}
QByteArray* QgsWCSServer::getCoverage()
{
QStringList wcsLayersId = mConfigParser->wcsLayers();
QList<QgsMapLayer*> layerList;
QStringList mErrors = QStringList();
//defining coverage name
QString coveName = "";
//read COVERAGE
QMap<QString, QString>::const_iterator cove_name_it = mParameters.find( "COVERAGE" );
if ( cove_name_it != mParameters.end() )
{
coveName = cove_name_it.value();
}
if ( coveName == "" )
{
QMap<QString, QString>::const_iterator cove_name_it = mParameters.find( "IDENTIFIER" );
if ( cove_name_it != mParameters.end() )
{
coveName = cove_name_it.value();
}
}
if ( coveName == "" )
{
mErrors << QString( "COVERAGE is mandatory" );
}
layerList = mConfigParser->mapLayerFromCoverage( coveName );
if ( layerList.size() < 1 )
{
mErrors << QString( "The layer for the COVERAGE '%1' is not found" ).arg( coveName );
}
bool conversionSuccess;
// BBOX
bool bboxOk = false;
double minx = 0.0, miny = 0.0, maxx = 0.0, maxy = 0.0;
// WIDTh and HEIGHT
int width = 0, height = 0;
// CRS
QString crs = "";
// read BBOX
QMap<QString, QString>::const_iterator bbIt = mParameters.find( "BBOX" );
if ( bbIt == mParameters.end() )
{
minx = 0; miny = 0; maxx = 0; maxy = 0;
}
else
{
bboxOk = true;
QString bbString = bbIt.value();
minx = bbString.section( ",", 0, 0 ).toDouble( &conversionSuccess );
if ( !conversionSuccess ) {bboxOk = false;}
miny = bbString.section( ",", 1, 1 ).toDouble( &conversionSuccess );
if ( !conversionSuccess ) {bboxOk = false;}
maxx = bbString.section( ",", 2, 2 ).toDouble( &conversionSuccess );
if ( !conversionSuccess ) {bboxOk = false;}
maxy = bbString.section( ",", 3, 3 ).toDouble( &conversionSuccess );
if ( !conversionSuccess ) {bboxOk = false;}
}
if ( !bboxOk )
{
mErrors << QString( "The BBOX is mandatory and has to be xx.xxx,yy.yyy,xx.xxx,yy.yyy" );
}
// read WIDTH
width = mParameters.value( "WIDTH", "0" ).toInt( &conversionSuccess );
if ( !conversionSuccess )
width = 0;
// read HEIGHT
height = mParameters.value( "HEIGHT", "0" ).toInt( &conversionSuccess );
if ( !conversionSuccess )
{
height = 0;
}
if ( width < 0 || height < 0 )
{
mErrors << QString( "The WIDTH and HEIGHT are mandatory and have to be integer" );
}
crs = mParameters.value( "CRS", "" );
if ( crs == "" )
{
mErrors << QString( "The CRS is mandatory" );
}
if ( mErrors.count() != 0 )
{
throw QgsMapServiceException( "RequestNotWellFormed", mErrors.join( ". " ) );
}
QgsCoordinateReferenceSystem requestCRS = QgsCRSCache::instance()->crsByAuthId( crs );
if ( !requestCRS.isValid() )
{
mErrors << QString( "Could not create request CRS" );
throw QgsMapServiceException( "RequestNotWellFormed", mErrors.join( ". " ) );
}
QgsRectangle rect( minx, miny, maxx, maxy );
QgsMapLayer* layer = layerList.at( 0 );
QgsRasterLayer* rLayer = dynamic_cast<QgsRasterLayer*>( layer );
if ( rLayer && wcsLayersId.contains( rLayer->id() ) )
{
// RESPONSE_CRS
QgsCoordinateReferenceSystem responseCRS = rLayer->crs();
crs = mParameters.value( "RESPONSE_CRS", "" );
if ( crs != "" )
{
responseCRS = QgsCRSCache::instance()->crsByAuthId( crs );
if ( !responseCRS.isValid() )
{
responseCRS = rLayer->crs();
}
}
// transform rect
if ( requestCRS != rLayer->crs() )
{
QgsCoordinateTransform t( requestCRS, rLayer->crs() );
rect = t.transformBoundingBox( rect );
}
QTemporaryFile tempFile;
tempFile.open();
QgsRasterFileWriter fileWriter( tempFile.fileName() );
// clone pipe/provider
QgsRasterPipe* pipe = new QgsRasterPipe();
if ( !pipe->set( rLayer->dataProvider()->clone() ) )
{
mErrors << QString( "Cannot set pipe provider" );
throw QgsMapServiceException( "RequestNotWellFormed", mErrors.join( ". " ) );
}
// add projector if necessary
if ( responseCRS != rLayer->crs() )
{
QgsRasterProjector * projector = new QgsRasterProjector;
projector->setCRS( rLayer->crs(), responseCRS );
if ( !pipe->insert( 2, projector ) )
{
mErrors << QString( "Cannot set pipe projector" );
throw QgsMapServiceException( "RequestNotWellFormed", mErrors.join( ". " ) );
}
}
QgsRasterFileWriter::WriterError err = fileWriter.writeRaster( pipe, width, height, rect, responseCRS );
if ( err != QgsRasterFileWriter::NoError )
{
mErrors << QString( "Cannot write raster error code: %1" ).arg( err );
throw QgsMapServiceException( "RequestNotWellFormed", mErrors.join( ". " ) );
}
delete pipe;
QByteArray* ba = 0;
ba = new QByteArray();
*ba = tempFile.readAll();
return ba;
}
return 0;
}
void WBHistoryManager::save()
{
QSettings settings;
settings.beginGroup(QLatin1String("history"));
settings.setValue(QLatin1String("historyLimit"), m_historyLimit);
bool saveAll = m_lastSavedUrl.isEmpty();
int first = m_history.count() - 1;
if (!saveAll)
{
// find the first one to save
for (int i = 0; i < m_history.count(); ++i)
{
if (m_history.at(i).url == m_lastSavedUrl)
{
first = i - 1;
break;
}
}
}
if (first == m_history.count() - 1)
saveAll = true;
QString directory = UBSettings::userDataDirectory();
if (directory.isEmpty())
directory = QDir::homePath() + QLatin1String("/.") + QCoreApplication::applicationName();
if (!QFile::exists(directory))
{
QDir dir;
dir.mkpath(directory);
}
QFile historyFile(directory + QLatin1String("/history"));
// When saving everything use a temporary file to prevent possible data loss.
QTemporaryFile tempFile;
tempFile.setAutoRemove(false);
bool open = false;
if (saveAll)
{
open = tempFile.open();
} else {
open = historyFile.open(QFile::Append);
}
if (!open)
{
qWarning() << "Unable to open history file for saving"
<< (saveAll ? tempFile.fileName() : historyFile.fileName());
return;
}
QDataStream out(saveAll ? &tempFile : &historyFile);
for (int i = first; i >= 0; --i)
{
QByteArray data;
QDataStream stream(&data, QIODevice::WriteOnly);
WBHistoryItem item = m_history.at(i);
stream << HISTORY_VERSION << item.url << item.dateTime << item.title;
out << data;
}
tempFile.close();
if (saveAll)
{
if (historyFile.exists() && !historyFile.remove())
qWarning() << "History: error removing old history." << historyFile.errorString();
if (!tempFile.rename(historyFile.fileName()))
qWarning() << "History: error moving new history over old." << tempFile.errorString() << historyFile.fileName();
}
m_lastSavedUrl = m_history.value(0).url;
}
void ut_file::testRevertRestore()
{
QTemporaryFile testFile;
testFile.open();
QuillImage image = Unittests::generatePaletteImage();
image.save(testFile.fileName(), "png");
QuillImageFilter *filter =
QuillImageFilterFactory::createImageFilter(QuillImageFilter::Name_BrightnessContrast);
QVERIFY(filter);
filter->setOption(QuillImageFilter::Brightness, QVariant(20));
QuillImage imageAfter = filter->apply(image);
QuillFile *file = new QuillFile(testFile.fileName(), Strings::png);
QVERIFY(file->setDisplayLevel(0));
QCOMPARE(file->canRestore(),false);
QCOMPARE(file->canRevert(),false);
file->runFilter(filter);
Quill::releaseAndWait();
Quill::releaseAndWait();
QCOMPARE(file->canRestore(),false);
QCOMPARE(file->canRevert(),true);
QuillImageFilter *filter1 =
QuillImageFilterFactory::createImageFilter(QuillImageFilter::Name_Rotate);
filter1->setOption(QuillImageFilter::Angle, QVariant(-90));
QuillImage imageAfter1 = filter1->apply(imageAfter);
file->runFilter(filter1);
Quill::releaseAndWait();
Quill::releaseAndWait();
QCOMPARE(file->canRestore(),false);
QCOMPARE(file->canRevert(),true);
//Test revert
file->revert();
Quill::releaseAndWait();
Quill::releaseAndWait();
QCOMPARE(file->canRestore(),true);
QCOMPARE(file->canRevert(),false);
QCOMPARE(file->internalFile()->m_stack->revertIndex(),3);
QVERIFY(Unittests::compareImage(file->image(), image));
file->save();
Quill::releaseAndWait();
Quill::releaseAndWait();
//Test restore
file->restore();
Quill::releaseAndWait();
Quill::releaseAndWait();
QCOMPARE(file->canRestore(),false);
QCOMPARE(file->canRevert(),true);
QCOMPARE(file->internalFile()->m_stack->revertIndex(),0);
QVERIFY(Unittests::compareImage(file->image(), imageAfter1));
//Test redo with revert and restore
file->revert();
Quill::releaseAndWait();
Quill::releaseAndWait();
QCOMPARE(file->canRestore(),true);
QCOMPARE(file->canRevert(),false);
QCOMPARE(file->internalFile()->m_stack->revertIndex(),3);
file->redo();
QCOMPARE(file->canRestore(),false);
QCOMPARE(file->canRevert(),true);
QCOMPARE(file->internalFile()->m_stack->revertIndex(),0);
//Test one additional operation after revert
file->revert();
Quill::releaseAndWait();
Quill::releaseAndWait();
QCOMPARE(file->canRestore(),true);
QCOMPARE(file->canRevert(),false);
QCOMPARE(file->internalFile()->m_stack->revertIndex(),2);
QuillImageFilter *filter2 =
QuillImageFilterFactory::createImageFilter(QuillImageFilter::Name_Rotate);
filter2->setOption(QuillImageFilter::Angle, QVariant(-90));
file->runFilter(filter2);
QCOMPARE(file->canRestore(),false);
QCOMPARE(file->canRevert(),true);
QCOMPARE(file->internalFile()->m_stack->revertIndex(),0);
delete file;
}
int TorrentPlugin::AddJob (Entity e)
{
QString suggestedFname;
if (e.Entity_.canConvert<QUrl> ())
{
QUrl resource = e.Entity_.toUrl ();
if (resource.scheme () == "magnet")
{
QString at = XmlSettingsManager::Instance ()->
property ("AutomaticTags").toString ();
QStringList tags = e.Additional_ [" Tags"].toStringList ();
Q_FOREACH (QString tag, Core::Instance ()->GetProxy ()->
GetTagsManager ()->Split (at))
tags << Core::Instance ()->GetProxy ()->
GetTagsManager ()->GetID (tag);
QList<QPair<QString, QString> > queryItems = resource.queryItems ();
for (QList<QPair<QString, QString> >::const_iterator i = queryItems.begin (),
end = queryItems.end (); i != end; ++i)
if (i->first == "kt")
{
QStringList humanReadable = i->second
.split ('+', QString::SkipEmptyParts);
Q_FOREACH (QString hr, humanReadable)
tags += Core::Instance ()->GetProxy ()->
GetTagsManager ()->GetID (hr);
}
return Core::Instance ()->AddMagnet (resource.toString (),
e.Location_,
tags,
e.Parameters_);
}
else if (resource.scheme () == "file")
suggestedFname = resource.toLocalFile ();
}
QByteArray entity = e.Entity_.toByteArray ();
QFile file (suggestedFname);
if ((!file.exists () ||
!file.open (QIODevice::ReadOnly)) &&
Core::Instance ()->IsValidTorrent (entity))
{
QTemporaryFile file ("lctemporarybittorrentfile.XXXXXX");
if (!file.open ())
return -1;
file.write (entity);
suggestedFname = file.fileName ().toUtf8 ();
file.setAutoRemove (false);
}
AddTorrentDialog_->Reinit ();
AddTorrentDialog_->SetFilename (suggestedFname);
if (!e.Location_.isEmpty ())
AddTorrentDialog_->SetSavePath (e.Location_);
QString path;
QStringList tags = e.Additional_ [" Tags"].toStringList ();
QVector<bool> files;
QString fname;
bool tryLive = e.Additional_ ["TryToStreamLive"].toBool ();
if (e.Parameters_ & FromUserInitiated)
{
if (!tags.isEmpty ())
AddTorrentDialog_->SetTags (tags);
if (AddTorrentDialog_->exec () == QDialog::Rejected)
return -1;
fname = AddTorrentDialog_->GetFilename (),
path = AddTorrentDialog_->GetSavePath ();
tryLive = AddTorrentDialog_->GetTryLive ();
files = AddTorrentDialog_->GetSelectedFiles ();
tags = AddTorrentDialog_->GetTags ();
if (AddTorrentDialog_->GetAddType () == Core::Started)
e.Parameters_ &= ~NoAutostart;
else
e.Parameters_ |= NoAutostart;
}
else
{
fname = suggestedFname;
path = e.Location_;
QString at = XmlSettingsManager::Instance ()->
property ("AutomaticTags").toString ();
Q_FOREACH (QString tag, Core::Instance ()->GetProxy ()->
GetTagsManager ()->Split (at))
tags << Core::Instance ()->GetProxy ()->
GetTagsManager ()->GetID (tag);
}
int result = Core::Instance ()->AddFile (fname,
path,
tags,
tryLive,
files,
e.Parameters_);
setActionsEnabled ();
file.remove ();
return result;
}
void doTests() {
KstVectorPtr vp = new KstVector(KstObjectTag::fromString("tempVector"), 10);
for (int i = 0; i < 10; i++){
vp->value()[i] = i;
}
KstPSDPtr psd = new KstPSD(QString("psdTest"), vp, 0.0, false, 10, false, false, QString("vUnits"), QString("rUnits"), WindowUndefined, 0.0, PSDUndefined);
doTest(psd->tagName() == "psdTest");
doTest(psd->vTag() == "tempVector");
doTest(psd->output() == PSDUndefined);
doTest(!psd->apodize());
doTest(!psd->removeMean());
doTest(!psd->average());
doTest(psd->freq() == 0.0);
doTest(psd->apodizeFxn() == WindowUndefined);
doTest(psd->gaussianSigma() == 0);
KstVectorPtr vpVX = psd->vX();
KstVectorPtr vpVY = psd->vY();
doTest(vpVX->length() == 1);
doTest(vpVX->value()[0] != vpVX->value()[0]);
doTest(vpVY->length() == 1);
doTest(vpVY->value()[0] != vpVY->value()[0]);
psd->writeLock();
doTest(psd->update(0) == KstObject::UPDATE);
psd->unlock();
for(int j = 0; j < vpVX->length(); j++){
doTest(vpVX->value()[j] == 0);
}
psd->setOutput(PSDAmplitudeSpectralDensity);
psd->setApodize(true);
psd->setRemoveMean(true);
psd->setAverage(true);
psd->setFreq(0.1);
psd->setApodizeFxn(WindowOriginal);
psd->setGaussianSigma(0.2);
doTest(psd->tagName() == "psdTest");
doTest(psd->vTag() == "tempVector");
doTest(psd->output() == PSDAmplitudeSpectralDensity);
doTest(psd->apodize());
doTest(psd->removeMean());
doTest(psd->average());
doTest(psd->freq() == 0.1);
doTest(psd->apodizeFxn() == WindowOriginal);
doTest(psd->gaussianSigma() == 0.2);
// doTest(psd->update(0) == KstObject::UPDATE);
// QString ps = "PSD: " + psd->vTag();
// doTest(psd->propertyString() == ps);
// doTest(!psd->curveHints().curveName() == "");
// printf("Curve name [%s]", kstCHL[0].curveName());
// printf("X Vector name [%s]", kstCHL[0].xVectorName());
// printf("Y Vector name [%s]", kstCHL[0].yVectorName());
QTemporaryFile tf;
tf.open();
QTextStream ts(&tf);
psd->save(ts, "");
QFile::remove(tf.fileName());
QDomNode n = makeDOMElement("psdDOMPsd", "psdDOMVector").firstChild();
QDomElement e = n.toElement();
KstPSDPtr psdDOM = new KstPSD(e);
doTest(psdDOM->tagName() == "psdDOMPsd");
doTest(psdDOM->output() == PSDAmplitudeSpectralDensity);
doTest(psdDOM->apodize());
doTest(psdDOM->removeMean());
doTest(psdDOM->average());
doTest(psdDOM->freq() == 128);
doTest(psdDOM->apodizeFxn() == WindowOriginal);
doTest(psdDOM->gaussianSigma() == 0.01);
// KstVectorPtr vpVX = psdDOM->vX();
// for(int j = 0; j < vpVX->length(); j++){
// printf("[%d][%lf]", j, vpVX->value()[j]);
// }
// KstVectorPtr vpVY = psdDOM->vY();
}
int process( const QDir &input, const QDir &output, const QString &xml )
{
QSqlDatabase database = QSqlDatabase::addDatabase( "QSQLITE" );
database.setDatabaseName( input.filePath( "speakers.db" ) );
if ( !database.open() ) {
qDebug() << "Failed to connect to database " << input.filePath( "speakers.db" );
return 3;
}
output.mkdir( "files.kde.org" );
QSqlQuery query( "SELECT * FROM speakers ORDER BY Id" );
QFile xmlFile( xml );
if ( !xmlFile.open( QFile::WriteOnly | QFile::Truncate ) ) {
qDebug() << "Failed to write to " << xmlFile.fileName();
return 3;
}
QTextStream xmlOut( &xmlFile );
xmlOut << "<?xml version=\"1.0\" encoding=\"UTF-8\"?>\n";
xmlOut << "<!DOCTYPE knewstuff SYSTEM \"knewstuff.dtd\">\n";
xmlOut << "<?xml-stylesheet type=\"text/xsl\" href=\"speakers.xsl\" ?>\n";
xmlOut << "<knewstuff>\n";
int index = 71;
while (query.next()) {
QString const name = query.value(1).toString();
QString const email = query.value(2).toString();
QString const nick = query.value(3).toString();
QString const gender = query.value(4).toString();
QString const language = query.value(5).toString();
QString const lang = language.mid(0, language.indexOf(QLatin1Char('(')) - 1).replace(QLatin1Char(' '), QLatin1Char('-'));
QString const description = query.value(6).toString();
QString const token = query.value(7).toString();
QString const date = query.value(8).toString();
QString const zip = input.filePath( token );
QTemporaryFile tmpFile;
tmpFile.open();
QString const extracted = tmpFile.fileName();
tmpFile.remove();
QDir::root().mkdir( extracted );
qDebug() << "Name: " << name;
QString const simpleNick = QString( nick ).replace( QLatin1Char(' '), QLatin1Char('-') );
QString const nickDir = output.filePath("files.kde.org") + QLatin1Char('/') + simpleNick;
QDir::root().mkdir( nickDir );
extract( zip, extracted );
normalize( extracted );
createLegalFiles( extracted, name, email );
QFile::copy(extracted + QLatin1String("/Marble.ogg"), nickDir + QLatin1Char('/') + lang + QLatin1Char('-') + simpleNick + QLatin1String(".ogg"));
convertToMarbleFormat(extracted, nickDir + QLatin1Char('/') + lang + QLatin1Char('-') + simpleNick + QLatin1String(".zip"));
convertToTomTomFormat(extracted, nickDir, nick, simpleNick, index, gender == QLatin1String("male"), lang);
convertToNewStuffFormat(extracted, nickDir + QLatin1Char('/') + lang + QLatin1Char('-') + simpleNick + QLatin1String(".tar.gz"));
xmlOut << " <stuff category=\"marble/data/audio\">\n";
xmlOut << " <name lang=\"en\">" << language << " - " << nick << " (" << gender << ")" << "</name>\n";
xmlOut << " <author>" << name << "</author>\n";
xmlOut << " <licence>CC-By-SA 3.0</licence>\n";
xmlOut << " <summary lang=\"en\">" << description << "</summary>\n";
xmlOut << " <version>0.1</version>\n";
xmlOut << " <releasedate>" << date << "</releasedate>\n";
xmlOut << " <preview lang=\"en\">http://edu.kde.org/marble/speaker-" << gender << ".png</preview>\n";
xmlOut << " <payload lang=\"en\">http://files.kde.org/marble/audio/speakers/" << simpleNick << "/" << lang << "-" << simpleNick << ".tar.gz</payload>\n";
xmlOut << " <payload lang=\"ogg\">http://files.kde.org/marble/audio/speakers/" << simpleNick << "/" << lang << "-" << simpleNick << ".ogg</payload>\n";
xmlOut << " <payload lang=\"zip\">http://files.kde.org/marble/audio/speakers/" << simpleNick << "/" << lang << "-" << simpleNick << ".zip</payload>\n";
xmlOut << " <payload lang=\"tomtom\">http://files.kde.org/marble/audio/speakers/" << simpleNick << "/" << lang << "-" << simpleNick << "-TomTom.zip</payload>\n";
xmlOut << " </stuff>\n";
++index;
}
xmlOut << "</knewstuff>\n";
xmlFile.close();
return 0;
}
/**
* generate layout and apply it to the given diagram.
*
* @return true if generating succeeded
*/
bool LayoutGenerator::generate(UMLScene *scene, const QString &variant)
{
QTemporaryFile in;
QTemporaryFile out;
QTemporaryFile xdotOut;
if (!isEnabled()) {
uWarning() << "Could not apply autolayout because graphviz installation has not been found.";
return false;
}
#ifdef LAYOUTGENERATOR_DEBUG
in.setAutoRemove(false);
out.setAutoRemove(false);
xdotOut.setAutoRemove(false);
#endif
// generate filenames
in.open();
in.close();
out.open();
out.close();
xdotOut.open();
xdotOut.close();
#ifdef LAYOUTGENERATOR_DEBUG
qDebug() << textViewer() << in.fileName();
qDebug() << textViewer() << out.fileName();
qDebug() << textViewer() << xdotOut.fileName();
#endif
if (!createDotFile(scene, in.fileName(), variant))
return false;
QString executable = m_dotPath + QLatin1Char('/') + m_generator;
QProcess p;
QStringList args;
args << QLatin1String("-o") << out.fileName() << QLatin1String("-Tplain-ext") << in.fileName();
p.start(executable, args);
p.waitForFinished();
args.clear();
args << QLatin1String("-o") << xdotOut.fileName() << QLatin1String("-Txdot") << in.fileName();
p.start(executable, args);
p.waitForFinished();
#ifdef LAYOUTGENERATOR_DEBUG
QTemporaryFile pngFile;
pngFile.setAutoRemove(false);
pngFile.setFileTemplate(QDir::tempPath() + QLatin1String("/umbrello-layoutgenerator-XXXXXX.png"));
pngFile.open();
pngFile.close();
qDebug() << pngViewer() << pngFile.fileName();
args.clear();
args << QLatin1String("-o") << pngFile.fileName() << QLatin1String("-Tpng") << in.fileName();
p.start(executable, args);
p.waitForFinished();
#endif
#ifndef USE_XDOT
if (!readGeneratedDotFile(out.fileName()))
#else
if (!readGeneratedDotFile(xdotOut.fileName()))
#endif
return false;
return true;
}
bool Packaging::ExtractTar(QTemporaryFile& tarFile, PackageData *packageData)
{
TarHeader tarHeader;
if (!tarFile.open())
{
Alerts::DisplayError(QString("Error opening temporary TAR archive:\n%1").arg(tarFile.fileName()));
return (false);
}
bool previousEmpty = false;
QProgressDialog progressDialog("Extracting files...", "Cancel", 0, tarFile.size());
progressDialog.setWindowModality(Qt::ApplicationModal);
progressDialog.setWindowTitle("Heimdall Frontend");
while (!tarFile.atEnd())
{
qint64 dataRead = tarFile.read(tarHeader.buffer, TarHeader::kBlockLength);
if (dataRead != TarHeader::kBlockLength)
{
progressDialog.close();
Alerts::DisplayError("Package's TAR archive is malformed.");
tarFile.close();
return (false);
}
progressDialog.setValue(tarFile.pos());
if (progressDialog.wasCanceled())
{
tarFile.close();
progressDialog.close();
return (false);
}
//bool ustarFormat = strcmp(tarHeader.fields.magic, ustarMagic) == 0;
bool empty = true;
for (int i = 0; i < TarHeader::kBlockLength; i++)
{
if (tarHeader.buffer[i] != 0)
{
empty = false;
break;
}
}
if (empty)
{
if (previousEmpty)
{
// Two empty blocks in a row means we've reached the end of the archive.
break;
}
}
else
{
int checksum = 0;
for (char *bufferIndex = tarHeader.buffer; bufferIndex < tarHeader.fields.checksum; bufferIndex++)
checksum += static_cast<unsigned char>(*bufferIndex);
checksum += 8 * ' ';
checksum += static_cast<unsigned char>(tarHeader.fields.typeFlag);
// Both the TAR and USTAR formats have terrible documentation, it's not clear if the following code is required.
/*if (ustarFormat)
{
for (char *bufferIndex = tarHeader.fields.linkName; bufferIndex < tarHeader.fields.prefix + 155; bufferIndex++)
checksum += static_cast<unsigned char>(*bufferIndex);
}*/
bool parsed = false;
// The size field is not always null terminated, so we must create a copy and null terminate it for parsing.
char fileSizeString[13];
memcpy(fileSizeString, tarHeader.fields.size, 12);
fileSizeString[12] = '\0';
qulonglong fileSize = QString(fileSizeString).toULongLong(&parsed, 8);
if (!parsed)
{
progressDialog.close();
Alerts::DisplayError("Tar header contained an invalid file size.");
tarFile.close();
return (false);
}
if (fileSize > 0 && tarHeader.fields.typeFlag == '0')
{
// We're working with a file.
QString filename = QString::fromUtf8(tarHeader.fields.name);
QTemporaryFile *outputFile = new QTemporaryFile("XXXXXX-" + filename);
packageData->GetFiles().append(outputFile);
if (!outputFile->open())
{
progressDialog.close();
Alerts::DisplayError(QString("Failed to open output file: \n%1").arg(outputFile->fileName()));
tarFile.close();
return (false);
}
qulonglong dataRemaining = fileSize;
char readBuffer[TarHeader::kBlockReadCount * TarHeader::kBlockLength];
// Copy the file contents from tarFile to outputFile
while (dataRemaining > 0)
{
qint64 fileDataToRead = (dataRemaining < TarHeader::kBlockReadCount * TarHeader::kBlockLength)
? dataRemaining : TarHeader::kBlockReadCount * TarHeader::kBlockLength;
qint64 dataRead = tarFile.read(readBuffer, fileDataToRead + (TarHeader::kBlockLength - fileDataToRead % TarHeader::kBlockLength) % TarHeader::kBlockLength);
if (dataRead < fileDataToRead || dataRead % TarHeader::kBlockLength != 0)
{
progressDialog.close();
Alerts::DisplayError("Unexpected read error whilst extracting package files.");
tarFile.close();
outputFile->close();
remove(outputFile->fileName().toStdString().c_str());
return (false);
}
outputFile->write(readBuffer, fileDataToRead);
dataRemaining -= fileDataToRead;
progressDialog.setValue(tarFile.pos());
if (progressDialog.wasCanceled())
{
tarFile.close();
outputFile->close();
remove(outputFile->fileName().toStdString().c_str());
progressDialog.close();
return (false);
}
}
outputFile->close();
}
else
{
progressDialog.close();
Alerts::DisplayError("Heimdall packages shouldn't contain links or directories.");
tarFile.close();
return (false);
}
}
previousEmpty = empty;
}
progressDialog.close();
tarFile.close();
return (true);
}
QString createObjectsAndTypesPage(PandaDocument* document)
{
static QTemporaryFile file(QDir::tempPath() + "/pandaRef_XXXXXX.html");
file.open();
file.resize(0);
QTextStream out(&file);
out << "<!DOCTYPE html>\n"
"<html lang=\"en\">\n"
" <head>\n"
" <meta charset=\"utf-8\">\n"
" <title>List of available objects and types for Panda</title>\n"
" </head>\n"
" <body>\n";
out << " <h1>Types</h1>\n";
auto dataEntriesList = DataFactory::entries();
std::sort(dataEntriesList.begin(), dataEntriesList.end(), dataTypeIdLessThan);
std::vector<EnrichedDataEntry> dataEntries;
// Copy entries and get additional info
for(auto d : dataEntriesList)
{
EnrichedDataEntry e = *d;
auto tmpData = DataFactory::create(d->fullType, "", "", nullptr);
if(tmpData)
{
e.description = tmpData->getDescription();
e.trait = tmpData->getDataTrait();
}
dataEntries.push_back(e);
}
for(const auto& d : dataEntries)
{
out << " <h2>" << QString::fromStdString(d.description) << "</h2>\n"
<< " <p>Type: " << toHtml(d.className) << "</p>\n"
<< " <p>Id: " << d.fullType << "</p>\n";
bool hasConversions = false;
for(const auto& d2 : dataEntries)
{
if(d.fullType == d2.fullType)
continue;
if(!d.trait || !d2.trait)
continue;
if(canConvert(d.trait, d2.trait))
{
if(!hasConversions)
{
out << " <p>Can be converted to: ";
hasConversions = true;
}
else
out << ", ";
out << QString::fromStdString(d2.description);
}
}
if(!hasConversions)
out << " <p>Has no known conversion";
out << "</p>\n";
auto widgets = DataWidgetFactory::getInstance()->getWidgetNames(d.fullType);
if(widgets.empty())
out << " <p>No widgets for this type</p>\n";
else
{
out << " <p>Widgets available: ";
bool first = true;
for(const auto& w : widgets)
{
if(first)
first = false;
else
out << ", ";
out << w;
}
out << "</p>\n";
}
}
out << " <h1>Objects</h1>\n";
std::vector<ObjectFactory::ClassEntry> objectsEntries;
for(const auto& object : ObjectFactory::registryMap())
objectsEntries.push_back(object.second);
std::sort(objectsEntries.begin(), objectsEntries.end(), objectsMenuLessThan);
for(const auto& o : objectsEntries)
{
out << " <h2>" << QString::fromStdString(o.menuDisplay) << "</h2>\n";
out << " <p>In module: " << toHtml(o.moduleName) << "</p>\n";
out << " <p>Type: " << toHtml(o.className) << "</p>\n";
out << " <p>" << QString::fromStdString(o.description) << "</p>\n";
if(o.creator)
{
auto object = o.creator->create(document);
auto datas = object->getDatas();
if(!datas.empty())
out << " <h3>Datas</h3>\n";
for(auto d : datas)
{
out << " <p>" << QString::fromStdString(d->getName()) << ": "
<< QString::fromStdString(d->getDescription()) << ". "
<< QString::fromStdString(d->getHelp()) << "</p>\n";
}
}
}
out << " </body>\n"
"</html>\n";
return file.fileName();
}
