double QgsLayoutItemScaleBar::mapWidth() const
{
if ( !mMap )
{
return 0.0;
}
QgsRectangle mapExtent = mMap->extent();
if ( mSettings.units() == QgsUnitTypes::DistanceUnknownUnit )
{
return mapExtent.width();
}
else
{
QgsDistanceArea da;
da.setSourceCrs( mMap->crs(), mLayout->project()->transformContext() );
da.setEllipsoid( mLayout->project()->ellipsoid() );
QgsUnitTypes::DistanceUnit units = da.lengthUnits();
double measure = da.measureLine( QgsPointXY( mapExtent.xMinimum(), mapExtent.yMinimum() ),
QgsPointXY( mapExtent.xMaximum(), mapExtent.yMinimum() ) );
measure /= QgsUnitTypes::fromUnitToUnitFactor( mSettings.units(), units );
return measure;
}
}
void TestQgsDistanceArea::collections()
{
//test measuring for collections
QgsDistanceArea myDa;
myDa.setSourceAuthId( "EPSG:4030" );
myDa.setEllipsoidalMode( true );
myDa.setEllipsoid( "WGS84" );
//collection of lines, should be sum of line length
QgsGeometry lines( QgsGeometryFactory::geomFromWkt( "GeometryCollection( LineString(0 36.53, 5.76 -48.16), LineString(0 25.54, 24.20 36.70) )" ) );
double result = myDa.measureLength( &lines );
QGSCOMPARENEAR( result, 12006159, 1 );
result = myDa.measureArea( &lines );
QVERIFY( qgsDoubleNear( result, 0 ) );
//collection of polygons
QgsGeometry polys( QgsGeometryFactory::geomFromWkt( "GeometryCollection( Polygon((0 36.53, 5.76 -48.16, 0 25.54, 0 36.53)), Polygon((10 20, 15 20, 15 10, 10 20)) )" ) );
result = myDa.measureArea( &polys );
QGSCOMPARENEAR( result, 670434859475LL, 1 );
result = myDa.measureLength( &polys );
QVERIFY( qgsDoubleNear( result, 0 ) );
//mixed collection
QgsGeometry mixed( QgsGeometryFactory::geomFromWkt( "GeometryCollection( LineString(0 36.53, 5.76 -48.16), LineString(0 25.54, 24.20 36.70), Polygon((0 36.53, 5.76 -48.16, 0 25.54, 0 36.53)), Polygon((10 20, 15 20, 15 10, 10 20)) )" ) );
//measure area specifically
result = myDa.measureArea( &mixed );
QGSCOMPARENEAR( result, 670434859475LL, 1 );
//measure length
result = myDa.measureLength( &mixed );
QGSCOMPARENEAR( result, 12006159, 1 );
}
void GlobePlugin::syncExtent()
{
QgsMapCanvas* mapCanvas = mQGisIface->mapCanvas();
QgsMapRenderer* mapRenderer = mapCanvas->mapRenderer();
QgsRectangle extent = mapCanvas->extent();
osgEarth::Util::EarthManipulator* manip = dynamic_cast<osgEarth::Util::EarthManipulator*>( mOsgViewer->getCameraManipulator() );
//rotate earth to north and perpendicular to camera
manip->setRotation( osg::Quat() );
QgsDistanceArea dist;
dist.setSourceCrs( mapRenderer->destinationCrs().srsid() );
dist.setEllipsoidalMode( mapRenderer->hasCrsTransformEnabled() );
dist.setEllipsoid( QgsProject::instance()->readEntry( "Measure", "/Ellipsoid", GEO_NONE ) );
QgsPoint ll = QgsPoint( extent.xMinimum(), extent.yMinimum() );
QgsPoint ul = QgsPoint( extent.xMinimum(), extent.yMaximum() );
double height = dist.measureLine( ll, ul );
//camera viewing angle
double viewAngle = 30;
//camera distance
double distance = height / tan( viewAngle * osg::PI / 180 ); //c = b*cotan(B(rad))
OE_NOTICE << "map extent: " << height << " camera distance: " << distance << std::endl;
osgEarth::Util::Viewpoint viewpoint( osg::Vec3d( extent.center().x(), extent.center().y(), 0.0 ), 0.0, -90.0, distance );
manip->setViewpoint( viewpoint, 4.0 );
}
QgsAttributeActionPropertiesDialog::QgsAttributeActionPropertiesDialog( QgsVectorLayer* layer, QWidget* parent )
: QDialog( parent )
, mLayer( layer )
{
setupUi( this );
// display the expression builder
QgsExpressionContext context;
context << QgsExpressionContextUtils::globalScope()
<< QgsExpressionContextUtils::projectScope()
<< QgsExpressionContextUtils::layerScope( mLayer );
QgsDistanceArea myDa;
myDa.setSourceCrs( mLayer->crs().srsid() );
myDa.setEllipsoidalMode( QgisApp::instance()->mapCanvas()->mapSettings().hasCrsTransformEnabled() );
myDa.setEllipsoid( QgsProject::instance()->ellipsoid() );
mFieldExpression->setLayer( mLayer );
mFieldExpression->setGeomCalculator( myDa );
connect( mBrowseButton, SIGNAL( clicked( bool ) ), this, SLOT( browse() ) );
connect( mInsertFieldOrExpression, SIGNAL( clicked( bool ) ), this, SLOT( insertExpressionOrField() ) );
connect( mActionName, SIGNAL( textChanged( QString ) ), this, SLOT( updateButtons() ) );
connect( mActionText, SIGNAL( textChanged() ), this, SLOT( updateButtons() ) );
updateButtons();
}
void QgsAttributeActionDialog::insertExpression()
{
QString selText = actionAction->textCursor().selectedText();
// edit the selected expression if there's one
if ( selText.startsWith( "[%" ) && selText.endsWith( "%]" ) )
selText = selText.mid( 2, selText.size() - 4 );
// display the expression builder
QgsExpressionContext context;
context << QgsExpressionContextUtils::globalScope()
<< QgsExpressionContextUtils::projectScope()
<< QgsExpressionContextUtils::layerScope( mActions->layer() );
QgsExpressionBuilderDialog dlg( mActions->layer(), selText, this, "generic", context );
dlg.setWindowTitle( tr( "Insert expression" ) );
QgsDistanceArea myDa;
myDa.setSourceCrs( mActions->layer()->crs().srsid() );
myDa.setEllipsoidalMode( QgisApp::instance()->mapCanvas()->mapSettings().hasCrsTransformEnabled() );
myDa.setEllipsoid( QgsProject::instance()->readEntry( "Measure", "/Ellipsoid", GEO_NONE ) );
dlg.setGeomCalculator( myDa );
if ( dlg.exec() == QDialog::Accepted )
{
QString expression = dlg.expressionBuilder()->expressionText();
//Only add the expression if the user has entered some text.
if ( !expression.isEmpty() )
{
actionAction->insertPlainText( "[%" + expression + "%]" );
}
}
}
double QgsComposerScaleBar::mapWidth() const
{
if ( !mComposerMap )
{
return 0.0;
}
QgsRectangle composerMapRect = *( mComposerMap->currentMapExtent() );
if ( mUnits == MapUnits )
{
return composerMapRect.width();
}
else
{
QgsDistanceArea da;
da.setEllipsoidalMode( mComposition->mapSettings().hasCrsTransformEnabled() );
da.setSourceCrs( mComposition->mapSettings().destinationCrs().srsid() );
da.setEllipsoid( QgsProject::instance()->readEntry( "Measure", "/Ellipsoid", "WGS84" ) );
double measure = da.measureLine( QgsPoint( composerMapRect.xMinimum(), composerMapRect.yMinimum() ), QgsPoint( composerMapRect.xMaximum(), composerMapRect.yMinimum() ) );
if ( mUnits == QgsComposerScaleBar::Feet )
{
measure /= QGis::fromUnitToUnitFactor( QGis::Feet, QGis::Meters );
}
else if ( mUnits == QgsComposerScaleBar::NauticalMiles )
{
measure /= QGis::fromUnitToUnitFactor( QGis::NauticalMiles, QGis::Meters );
}
return measure;
}
}
double QgsComposerScaleBar::mapWidth() const
{
if ( !mComposerMap )
{
return 0.0;
}
QgsRectangle composerMapRect = mComposerMap->extent();
if ( mUnits == MapUnits )
{
return composerMapRect.width();
}
else
{
QgsDistanceArea da;
da.setEllipsoidalMode( mComposerMap->mapRenderer()->hasCrsTransformEnabled() );
da.setSourceCrs( mComposerMap->mapRenderer()->destinationCrs().srsid() );
da.setEllipsoid( QgsProject::instance()->readEntry( "Measure", "/Ellipsoid", "WGS84" ) );
double measure = da.measureLine( QgsPoint( composerMapRect.xMinimum(), composerMapRect.yMinimum() ), QgsPoint( composerMapRect.xMaximum(), composerMapRect.yMinimum() ) );
if ( mUnits == Feet )
{
measure /= 0.3048;
}
return measure;
}
}
double QgsComposerScaleBar::mapDiagonal() const
{
if ( !mComposerMap )
{
return 0.0;
}
QgsRectangle composerMapRect = mComposerMap->extent();
if ( mUnits == MapUnits )
{
return sqrt( composerMapRect.width() * composerMapRect.width() + composerMapRect.height() * composerMapRect.height() );
}
else
{
QgsDistanceArea da;
da.setProjectionsEnabled( true );
da.setSourceCrs( mComposerMap->mapRenderer()->destinationCrs().srsid() );
QSettings s;
da.setEllipsoid( s.value( "/qgis/measure/ellipsoid", "WGS84" ).toString() );
double measure = da.measureLine( QgsPoint( composerMapRect.xMinimum(), composerMapRect.yMaximum() ), QgsPoint( composerMapRect.xMaximum(), composerMapRect.yMinimum() ) );
if ( mUnits == Feet )
{
measure /= 0.3048;
}
return measure;
}
}
void QgsMeasureDialog::configureDistanceArea( QgsDistanceArea& da )
{
QSettings settings;
QString ellipsoidId = settings.value( "/qgis/measure/ellipsoid", "WGS84" ).toString();
da.setSourceCrs( mTool->canvas()->mapRenderer()->destinationCrs().srsid() );
da.setEllipsoid( ellipsoidId );
da.setProjectionsEnabled( mcbProjectionEnabled->isChecked() );
}
void QgsMapToolMeasureAngle::configureDistanceArea( QgsDistanceArea& da )
{
QSettings settings;
QString ellipsoidId = settings.value( "/qgis/measure/ellipsoid", "WGS84" ).toString();
da.setSourceCrs( mCanvas->mapRenderer()->destinationCrs().srsid() );
da.setEllipsoid( ellipsoidId );
da.setProjectionsEnabled( mResultDisplay->projectionEnabled() );
}
void TestQgsDistanceArea::emptyPolygon()
{
QgsDistanceArea da;
da.setSourceCrs( 3452 );
da.setEllipsoidalMode( true );
da.setEllipsoid( "WGS84" );
//test that measuring an empty polygon doesn't crash
da.measurePolygon( QList< QgsPoint >() );
}
void TestQgsDistanceArea::regression13601()
{
//test regression #13601
QgsDistanceArea calc;
calc.setEllipsoidalMode( true );
calc.setEllipsoid( "NONE" );
calc.setSourceCrs( 1108L );
QgsGeometry geom( QgsGeometryFactory::geomFromWkt( "Polygon ((252000 1389000, 265000 1389000, 265000 1385000, 252000 1385000, 252000 1389000))" ) );
QVERIFY( qgsDoubleNear( calc.measureArea( &geom ), 52000000, 0.0001 ) );
}
void TestQgsDistanceArea::regression14675()
{
//test regression #14675
QgsDistanceArea calc;
calc.setEllipsoidalMode( true );
calc.setEllipsoid( "GRS80" );
calc.setSourceCrs( 145L );
QgsGeometry geom( QgsGeometryFactory::geomFromWkt( "Polygon ((917593.5791854317067191 6833700.00807378999888897, 917596.43389983859378844 6833700.67099479306489229, 917599.53056440979707986 6833700.78673478215932846, 917593.5791854317067191 6833700.00807378999888897))" ) );
//lots of tolerance here - the formulas get quite unstable with small areas due to division by very small floats
QGSCOMPARENEAR( calc.measureArea( &geom ), 0.83301, 0.02 );
}
QDialog* QgisAppInterface::getFeatureForm( QgsVectorLayer *l, QgsFeature &f )
{
QgsDistanceArea myDa;
myDa.setSourceCrs( l->crs().srsid() );
myDa.setEllipsoidalMode( QgisApp::instance()->mapCanvas()->mapRenderer()->hasCrsTransformEnabled() );
myDa.setEllipsoid( QgsProject::instance()->readEntry( "Measure", "/Ellipsoid", GEO_NONE ) );
QgsAttributeDialog *dialog = new QgsAttributeDialog( l, &f, false, myDa );
return dialog->dialog();
}
double Heatmap::mapUnitsOf( double meters, QgsCoordinateReferenceSystem layerCrs )
{
// Worker to transform metres input to mapunits
QgsDistanceArea da;
da.setSourceCrs( layerCrs.srsid() );
da.setEllipsoid( layerCrs.ellipsoidAcronym() );
if ( da.geographic() )
{
da.setEllipsoidalMode( true );
}
return meters / da.measureLine( QgsPoint( 0.0, 0.0 ), QgsPoint( 0.0, 1.0 ) );
}
void TestQgsDistanceArea::basic()
{
QgsPoint p1( 1.0, 3.0 ), p2( -2.0, -1.0 );
QgsDistanceArea daA;
double resultA, resultB, resultC;
daA.setEllipsoid( GEO_NONE );
resultA = daA.measureLine( p1, p2 );
QCOMPARE( resultA, 5.0 );
// Now, on an ellipsoid. Always less?
daA.setSourceCrs( 3006 );
daA.setEllipsoid( "WGS84" );
daA.setEllipsoidalMode( true );
resultA = daA.measureLine( p1, p2 );
QVERIFY( resultA < 5.0 );
// Test copy constructor
QgsDistanceArea daB( daA );
resultB = daB.measureLine( p1, p2 );
QCOMPARE( resultA, resultB );
// Different Ellipsoid
daB.setEllipsoid( "WGS72" );
resultB = daB.measureLine( p1, p2 );
QVERIFY( ! qFuzzyCompare( resultA, resultB ) );
// Test assignment
QSharedPointer<QgsDistanceArea> daC( new QgsDistanceArea );
*daC = daB;
resultC = daC->measureLine( p1, p2 );
QCOMPARE( resultB, resultC );
// Use parameter setting of ellipsoid radii (from WGS72 )
daA.setEllipsoid( 6378135.0, 6378135.0 - ( 6378135.0 / 298.26 ) );
resultA = daA.measureLine( p1, p2 );
QCOMPARE( resultA, resultB );
}
void TestQgsDistanceArea::measureUnits()
{
//test regression #13610
QgsDistanceArea calc;
calc.setEllipsoidalMode( false );
calc.setEllipsoid( "NONE" );
calc.setSourceCrs( 254L );
QGis::UnitType units;
QgsPoint p1( 1341683.9854275715, 408256.9562717728 );
QgsPoint p2( 1349321.7807031618, 408256.9562717728 );
double result = calc.measureLine( p1, p2, units );
//no OTF, result will be in CRS unit (feet)
QCOMPARE( units, QGis::Feet );
QVERIFY( qgsDoubleNear( result, 7637.7952755903825, 0.001 ) );
calc.setEllipsoidalMode( true );
calc.setEllipsoid( "WGS84" );
result = calc.measureLine( p1, p2, units );
//OTF, result will be in meters
QCOMPARE( units, QGis::Meters );
QVERIFY( qgsDoubleNear( result, 2328.0988253106957, 0.001 ) );
}
double HeatmapGui::mapUnitsOf( double dist, const QgsCoordinateReferenceSystem& layerCrs ) const
{
// converter function to transform layer input to mapunits
// so that bounding box can be updated
QgsDistanceArea da;
da.setSourceCrs( layerCrs.srsid() );
da.setEllipsoid( layerCrs.ellipsoidAcronym() );
if ( da.geographic() )
{
da.setEllipsoidalMode( true );
}
double unitDistance = da.measureLine( QgsPoint( 0.0, 0.0 ), QgsPoint( 0.0, 1.0 ) );
QgsDebugMsg( QString( "Converted %1 layer to %2 map units" ).arg( dist ).arg( dist / unitDistance ) );
return dist / unitDistance;
}
void TestQgsDistanceArea::test_distances()
{
// Read the file of Geod data
// Column 0 (first) is latitude point 1
// Column 1 is longitude point 1
// Column 3 is latitude point 2
// Column 4 is longitude point 3
// Column 6 is the resulting distance in meters on the WGS84 ellipsoid
// Note: lat is north/south, so the QgsPoint should be ( long, lat )
// See http://geographiclib.sourceforge.net/html/geodesic.html#testgeod
// Set up DA
QgsDistanceArea myDa;
myDa.setSourceAuthId( "EPSG:4030" );
myDa.setEllipsoidalMode( true );
myDa.setEllipsoid( "WGS84" );
QString myFileName = QString( TEST_DATA_DIR ) + "/GeodTest-nano.dat";
QFile myFile( myFileName );
if ( ! myFile.open( QIODevice::ReadOnly | QIODevice::Text ) )
{
QFAIL( "Couldn't open file" );
return;
}
QTextStream in( & myFile );
while ( !in.atEnd() )
{
QString line = in.readLine();
// Some test points (antipodal) does not converge with the chosen algorithm!
// See calcaulator at http://www.movable-type.co.uk/scripts/latlong-vincenty.html
// These are commented out.
if ( line[0] != '#' )
{
QStringList myLineList = line.split( ' ' ); // Split fields on space.
// Create points
QgsPoint p1( myLineList[1].toDouble(), myLineList[0].toDouble() );
QgsPoint p2( myLineList[4].toDouble(), myLineList[3].toDouble() );
double result = myDa.measureLine( p1, p2 );
// QgsDebugMsg( QString( "Distance from %1 to %2 is %3" ).arg( p1.toString( 15 ) ).arg( p2.toString( 15 ) ).arg( result, 0, 'g', 15 ) );
// QgsDebugMsg( QString( "Distance should be %1" ).arg( myLineList[6] ) );
// Check result is less than 0.5mm from expected.
QVERIFY( qAbs( result - myLineList[6].toDouble() ) < 0.0005 );
}
}
}
QgsAttributeDialog *QgisAppInterface::getFeatureForm( QgsVectorLayer *l, QgsFeature &feature )
{
QgsDistanceArea myDa;
myDa.setSourceCrs( l->crs() );
myDa.setEllipsoid( QgsProject::instance()->ellipsoid() );
QgsAttributeEditorContext context;
context.setDistanceArea( myDa );
context.setVectorLayerTools( qgis->vectorLayerTools() );
QgsAttributeDialog *dialog = new QgsAttributeDialog( l, &feature, false, qgis, true, context );
if ( !feature.isValid() )
{
dialog->setMode( QgsAttributeForm::AddFeatureMode );
}
return dialog;
}
QgsAttributeDialog *QgsFeatureAction::newDialog( bool cloneFeature )
{
QgsFeature *f = cloneFeature ? new QgsFeature( *mFeature ) : mFeature;
QgsAttributeEditorContext context;
QgsDistanceArea myDa;
myDa.setSourceCrs( mLayer->crs() );
myDa.setEllipsoidalMode( QgisApp::instance()->mapCanvas()->mapSettings().hasCrsTransformEnabled() );
myDa.setEllipsoid( QgsProject::instance()->readEntry( "Measure", "/Ellipsoid", GEO_NONE ) );
context.setDistanceArea( myDa );
context.setVectorLayerTools( QgisApp::instance()->vectorLayerTools() );
QgsAttributeDialog *dialog = new QgsAttributeDialog( mLayer, f, cloneFeature, NULL, true, context );
if ( mLayer->actions()->size() > 0 )
{
dialog->setContextMenuPolicy( Qt::ActionsContextMenu );
QAction *a = new QAction( tr( "Run actions" ), dialog );
a->setEnabled( false );
dialog->addAction( a );
for ( int i = 0; i < mLayer->actions()->size(); i++ )
{
const QgsAction &action = mLayer->actions()->at( i );
if ( !action.runable() )
continue;
QgsFeature& feat = const_cast<QgsFeature&>( *dialog->feature() );
QgsFeatureAction *a = new QgsFeatureAction( action.name(), feat, mLayer, i, -1, dialog );
dialog->addAction( a );
connect( a, SIGNAL( triggered() ), a, SLOT( execute() ) );
QAbstractButton *pb = dialog->findChild<QAbstractButton *>( action.name() );
if ( pb )
connect( pb, SIGNAL( clicked() ), a, SLOT( execute() ) );
}
}
return dialog;
}
QgsAttributeDialog* QgisAppInterface::getFeatureForm( QgsVectorLayer *l, QgsFeature &feature )
{
QgsDistanceArea myDa;
myDa.setSourceCrs( l->crs().srsid() );
myDa.setEllipsoidalMode( QgisApp::instance()->mapCanvas()->mapSettings().hasCrsTransformEnabled() );
myDa.setEllipsoid( QgsProject::instance()->readEntry( "Measure", "/Ellipsoid", GEO_NONE ) );
QgsAttributeEditorContext context;
context.setDistanceArea( myDa );
context.setVectorLayerTools( qgis->vectorLayerTools() );
QgsAttributeDialog *dialog = new QgsAttributeDialog( l, &feature, false, qgis, true, context );
if ( !feature.isValid() )
{
dialog->setMode( QgsAttributeForm::AddFeatureMode );
}
return dialog;
}
void GlobePlugin::syncExtent()
{
QgsMapCanvas* mapCanvas = mQGisIface->mapCanvas();
const QgsMapSettings &mapSettings = mapCanvas->mapSettings();
QgsRectangle extent = mapCanvas->extent();
long epsgGlobe = 4326;
QgsCoordinateReferenceSystem globeCrs;
globeCrs.createFromOgcWmsCrs( QString( "EPSG:%1" ).arg( epsgGlobe ) );
// transform extent to WGS84
if ( mapSettings.destinationCrs().authid().compare( QString( "EPSG:%1" ).arg( epsgGlobe ), Qt::CaseInsensitive ) != 0 )
{
QgsCoordinateReferenceSystem srcCRS( mapSettings.destinationCrs() );
QgsCoordinateTransform* coordTransform = new QgsCoordinateTransform( srcCRS, globeCrs );
extent = coordTransform->transformBoundingBox( extent );
delete coordTransform;
}
osgEarth::Util::EarthManipulator* manip = dynamic_cast<osgEarth::Util::EarthManipulator*>( mOsgViewer->getCameraManipulator() );
//rotate earth to north and perpendicular to camera
manip->setRotation( osg::Quat() );
QgsDistanceArea dist;
dist.setSourceCrs( globeCrs );
dist.setEllipsoidalMode( true );
dist.setEllipsoid( "WGS84" );
QgsPoint ll = QgsPoint( extent.xMinimum(), extent.yMinimum() );
QgsPoint ul = QgsPoint( extent.xMinimum(), extent.yMaximum() );
double height = dist.measureLine( ll, ul );
//camera viewing angle
double viewAngle = 30;
//camera distance
double distance = height / tan( viewAngle * osg::PI / 180 ); //c = b*cotan(B(rad))
OE_NOTICE << "map extent: " << height << " camera distance: " << distance << std::endl;
osgEarth::Util::Viewpoint viewpoint( osg::Vec3d( extent.center().x(), extent.center().y(), 0.0 ), 0.0, -90.0, distance );
manip->setViewpoint( viewpoint, 4.0 );
}
QgsAttributeDialog *QgsFeatureAction::newDialog( bool cloneFeature )
{
QgsFeature *f = cloneFeature ? new QgsFeature( *mFeature ) : mFeature;
QgsAttributeEditorContext context;
QgsDistanceArea myDa;
myDa.setSourceCrs( mLayer->crs() );
myDa.setEllipsoid( QgsProject::instance()->ellipsoid() );
context.setDistanceArea( myDa );
context.setVectorLayerTools( QgisApp::instance()->vectorLayerTools() );
context.setFormMode( QgsAttributeEditorContext::StandaloneDialog );
QgsAttributeDialog *dialog = new QgsAttributeDialog( mLayer, f, cloneFeature, parentWidget(), true, context );
dialog->setWindowFlags( dialog->windowFlags() | Qt::Tool );
dialog->setObjectName( QStringLiteral( "featureactiondlg:%1:%2" ).arg( mLayer->id() ).arg( f->id() ) );
QList<QgsAction> actions = mLayer->actions()->actions( QStringLiteral( "Feature" ) );
if ( !actions.isEmpty() )
{
dialog->setContextMenuPolicy( Qt::ActionsContextMenu );
QAction *a = new QAction( tr( "Run actions" ), dialog );
a->setEnabled( false );
dialog->addAction( a );
Q_FOREACH ( const QgsAction &action, actions )
{
if ( !action.runable() )
continue;
QgsFeature &feat = const_cast<QgsFeature &>( *dialog->feature() );
QgsFeatureAction *a = new QgsFeatureAction( action.name(), feat, mLayer, action.id(), -1, dialog );
dialog->addAction( a );
connect( a, &QAction::triggered, a, &QgsFeatureAction::execute );
QAbstractButton *pb = dialog->findChild<QAbstractButton *>( action.name() );
if ( pb )
connect( pb, &QAbstractButton::clicked, a, &QgsFeatureAction::execute );
}
}
double QgsComposerScaleBar::mapWidth() const
{
if ( !mComposerMap )
{
return 0.0;
}
QgsRectangle composerMapRect = *( mComposerMap->currentMapExtent() );
if ( mUnits == MapUnits )
{
return composerMapRect.width();
}
else
{
QgsDistanceArea da;
da.setEllipsoidalMode( mComposition->mapSettings().hasCrsTransformEnabled() );
da.setSourceCrs( mComposition->mapSettings().destinationCrs().srsid() );
da.setEllipsoid( mComposition->project()->ellipsoid() );
QgsUnitTypes::DistanceUnit units = QgsUnitTypes::DistanceMeters;
double measure = da.measureLine( QgsPoint( composerMapRect.xMinimum(), composerMapRect.yMinimum() ),
QgsPoint( composerMapRect.xMaximum(), composerMapRect.yMinimum() ),
units );
switch ( mUnits )
{
case QgsComposerScaleBar::Feet:
measure /= QgsUnitTypes::fromUnitToUnitFactor( QgsUnitTypes::DistanceFeet, units );
break;
case QgsComposerScaleBar::NauticalMiles:
measure /= QgsUnitTypes::fromUnitToUnitFactor( QgsUnitTypes::DistanceNauticalMiles, units );
break;
case QgsComposerScaleBar::Meters:
measure /= QgsUnitTypes::fromUnitToUnitFactor( QgsUnitTypes::DistanceMeters, units );
break;
case QgsComposerScaleBar::MapUnits:
//avoid warning
break;
}
return measure;
}
}
void QgsBullsEyeWidget::createLayer( QString layerName )
{
if ( layerName.isEmpty() )
{
layerName = QInputDialog::getText( this, tr( "Layer Name" ), tr( "Enter name of new layer:" ) );
}
if ( !layerName.isEmpty() )
{
QgsDistanceArea da;
da.setEllipsoid( "WGS84" );
da.setEllipsoidalMode( true );
da.setSourceCrs( mCanvas->mapSettings().destinationCrs() );
QgsRectangle extent = mCanvas->extent();
double extentHeight = da.measureLine( QgsPoint( extent.center().x(), extent.yMinimum() ), QgsPoint( extent.center().x(), extent.yMaximum() ) );
double interval = 0.5 * extentHeight * QGis::fromUnitToUnitFactor( QGis::Meters, QGis::NauticalMiles ) / 6; // Half height divided by nr rings+1, in nm
QgsBullsEyeLayer* bullEyeLayer = new QgsBullsEyeLayer( layerName );
bullEyeLayer->setup( mCanvas->extent().center(), mCanvas->mapSettings().destinationCrs(), 5, interval, 45 );
QgsMapLayerRegistry::instance()->addMapLayer( bullEyeLayer );
mLayerTreeView->setCurrentLayer( bullEyeLayer );
}
}
QgsAttributeActionPropertiesDialog::QgsAttributeActionPropertiesDialog( QgsAction::ActionType type, const QString& description, const QString& shortTitle, const QString& iconPath, const QString& actionText, bool capture, bool showInAttributeTable, QgsVectorLayer* layer, QWidget* parent )
: QDialog( parent )
, mLayer( layer )
{
setupUi( this );
mActionType->setCurrentIndex( type );
mActionName->setText( description );
mShortTitle->setText( shortTitle );
mActionIcon->setText( iconPath );
mIconPreview->setPixmap( QPixmap( iconPath ) );
mActionText->setText( actionText );
mCaptureOutput->setChecked( capture );
mShowInAttributeTable->setChecked( showInAttributeTable );
// display the expression builder
QgsExpressionContext context;
context << QgsExpressionContextUtils::globalScope()
<< QgsExpressionContextUtils::projectScope()
<< QgsExpressionContextUtils::layerScope( mLayer );
QgsDistanceArea myDa;
myDa.setSourceCrs( mLayer->crs().srsid() );
myDa.setEllipsoidalMode( QgisApp::instance()->mapCanvas()->mapSettings().hasCrsTransformEnabled() );
myDa.setEllipsoid( QgsProject::instance()->ellipsoid() );
mFieldExpression->setLayer( mLayer );
mFieldExpression->setGeomCalculator( myDa );
connect( mBrowseButton, SIGNAL( clicked( bool ) ), this, SLOT( browse() ) );
connect( mInsertFieldOrExpression, SIGNAL( clicked( bool ) ), this, SLOT( insertExpressionOrField() ) );
connect( mActionName, SIGNAL( textChanged( QString ) ), this, SLOT( updateButtons() ) );
connect( mActionText, SIGNAL( textChanged() ), this, SLOT( updateButtons() ) );
connect( mChooseIconButton, SIGNAL( clicked( bool ) ), this, SLOT( chooseIcon() ) );
updateButtons();
}
QMap< QString, QString > QgsMapToolIdentify::featureDerivedAttributes( QgsFeature *feature, QgsMapLayer *layer )
{
// Calculate derived attributes and insert:
// measure distance or area depending on geometry type
QMap< QString, QString > derivedAttributes;
// init distance/area calculator
QString ellipsoid = QgsProject::instance()->readEntry( "Measure", "/Ellipsoid", GEO_NONE );
QgsDistanceArea calc;
calc.setEllipsoidalMode( mCanvas->hasCrsTransformEnabled() );
calc.setEllipsoid( ellipsoid );
calc.setSourceCrs( layer->crs().srsid() );
QGis::WkbType wkbType = QGis::WKBNoGeometry;
QGis::GeometryType geometryType = QGis::NoGeometry;
if ( feature->geometry() )
{
geometryType = feature->geometry()->type();
wkbType = feature->geometry()->wkbType();
}
if ( geometryType == QGis::Line )
{
double dist = calc.measure( feature->geometry() );
QGis::UnitType myDisplayUnits;
convertMeasurement( calc, dist, myDisplayUnits, false );
QString str = calc.textUnit( dist, 3, myDisplayUnits, false ); // dist and myDisplayUnits are out params
derivedAttributes.insert( tr( "Length" ), str );
if ( wkbType == QGis::WKBLineString || wkbType == QGis::WKBLineString25D )
{
// Add the start and end points in as derived attributes
QgsPoint pnt = mCanvas->mapSettings().layerToMapCoordinates( layer, feature->geometry()->asPolyline().first() );
str = QLocale::system().toString( pnt.x(), 'g', 10 );
derivedAttributes.insert( tr( "firstX", "attributes get sorted; translation for lastX should be lexically larger than this one" ), str );
str = QLocale::system().toString( pnt.y(), 'g', 10 );
derivedAttributes.insert( tr( "firstY" ), str );
pnt = mCanvas->mapSettings().layerToMapCoordinates( layer, feature->geometry()->asPolyline().last() );
str = QLocale::system().toString( pnt.x(), 'g', 10 );
derivedAttributes.insert( tr( "lastX", "attributes get sorted; translation for firstX should be lexically smaller than this one" ), str );
str = QLocale::system().toString( pnt.y(), 'g', 10 );
derivedAttributes.insert( tr( "lastY" ), str );
}
}
else if ( geometryType == QGis::Polygon )
{
double area = calc.measure( feature->geometry() );
double perimeter = calc.measurePerimeter( feature->geometry() );
QGis::UnitType myDisplayUnits;
convertMeasurement( calc, area, myDisplayUnits, true ); // area and myDisplayUnits are out params
QString str = calc.textUnit( area, 3, myDisplayUnits, true );
derivedAttributes.insert( tr( "Area" ), str );
convertMeasurement( calc, perimeter, myDisplayUnits, false ); // perimeter and myDisplayUnits are out params
str = calc.textUnit( perimeter, 3, myDisplayUnits, false );
derivedAttributes.insert( tr( "Perimeter" ), str );
}
else if ( geometryType == QGis::Point &&
( wkbType == QGis::WKBPoint || wkbType == QGis::WKBPoint25D ) )
{
// Include the x and y coordinates of the point as a derived attribute
QgsPoint pnt = mCanvas->mapSettings().layerToMapCoordinates( layer, feature->geometry()->asPoint() );
QString str = QLocale::system().toString( pnt.x(), 'g', 10 );
derivedAttributes.insert( "X", str );
str = QLocale::system().toString( pnt.y(), 'g', 10 );
derivedAttributes.insert( "Y", str );
}
return derivedAttributes;
}
QMap< QString, QString > QgsMapToolIdentify::featureDerivedAttributes( QgsFeature *feature, QgsMapLayer *layer, const QgsPoint& layerPoint )
{
// Calculate derived attributes and insert:
// measure distance or area depending on geometry type
QMap< QString, QString > derivedAttributes;
// init distance/area calculator
QString ellipsoid = QgsProject::instance()->readEntry( "Measure", "/Ellipsoid", GEO_NONE );
QgsDistanceArea calc;
calc.setEllipsoidalMode( mCanvas->hasCrsTransformEnabled() );
calc.setEllipsoid( ellipsoid );
calc.setSourceCrs( layer->crs().srsid() );
QgsWKBTypes::Type wkbType = QgsWKBTypes::NoGeometry;
QGis::GeometryType geometryType = QGis::NoGeometry;
QgsVertexId vId;
QgsPointV2 closestPoint;
if ( feature->constGeometry() )
{
geometryType = feature->constGeometry()->type();
wkbType = feature->constGeometry()->geometry()->wkbType();
//find closest vertex to clicked point
closestPoint = QgsGeometryUtils::closestVertex( *feature->constGeometry()->geometry(), QgsPointV2( layerPoint.x(), layerPoint.y() ), vId );
}
if ( QgsWKBTypes::isMultiType( wkbType ) )
{
QString str = QLocale::system().toString( static_cast<QgsGeometryCollectionV2*>( feature->constGeometry()->geometry() )->numGeometries() );
derivedAttributes.insert( tr( "Parts" ), str );
str = QLocale::system().toString( vId.part + 1 );
derivedAttributes.insert( tr( "Part number" ), str );
}
if ( geometryType == QGis::Line )
{
const QgsPolyline &pline = feature->constGeometry()->asPolyline();
double dist = calc.measureLength( feature->constGeometry() );
QGis::UnitType myDisplayUnits;
convertMeasurement( calc, dist, myDisplayUnits, false );
QString str = calc.textUnit( dist, 3, myDisplayUnits, false ); // dist and myDisplayUnits are out params
derivedAttributes.insert( tr( "Length" ), str );
str = QLocale::system().toString( pline.size() );
derivedAttributes.insert( tr( "Vertices" ), str );
//add details of closest vertex to identify point
closestVertexAttributes( *feature->constGeometry()->geometry(), vId, layer, derivedAttributes );
if ( QgsWKBTypes::flatType( wkbType ) == QgsWKBTypes::LineString )
{
// Add the start and end points in as derived attributes
QgsPoint pnt = mCanvas->mapSettings().layerToMapCoordinates( layer, pline.first() );
str = QLocale::system().toString( pnt.x(), 'g', 10 );
derivedAttributes.insert( tr( "firstX", "attributes get sorted; translation for lastX should be lexically larger than this one" ), str );
str = QLocale::system().toString( pnt.y(), 'g', 10 );
derivedAttributes.insert( tr( "firstY" ), str );
pnt = mCanvas->mapSettings().layerToMapCoordinates( layer, pline.last() );
str = QLocale::system().toString( pnt.x(), 'g', 10 );
derivedAttributes.insert( tr( "lastX", "attributes get sorted; translation for firstX should be lexically smaller than this one" ), str );
str = QLocale::system().toString( pnt.y(), 'g', 10 );
derivedAttributes.insert( tr( "lastY" ), str );
}
}
else if ( geometryType == QGis::Polygon )
{
double area = calc.measureArea( feature->constGeometry() );
double perimeter = calc.measurePerimeter( feature->constGeometry() );
QGis::UnitType myDisplayUnits;
convertMeasurement( calc, area, myDisplayUnits, true ); // area and myDisplayUnits are out params
QString str = calc.textUnit( area, 3, myDisplayUnits, true );
derivedAttributes.insert( tr( "Area" ), str );
convertMeasurement( calc, perimeter, myDisplayUnits, false ); // perimeter and myDisplayUnits are out params
str = calc.textUnit( perimeter, 3, myDisplayUnits, false );
derivedAttributes.insert( tr( "Perimeter" ), str );
str = QLocale::system().toString( feature->constGeometry()->geometry()->nCoordinates() );
derivedAttributes.insert( tr( "Vertices" ), str );
//add details of closest vertex to identify point
closestVertexAttributes( *feature->constGeometry()->geometry(), vId, layer, derivedAttributes );
}
else if ( geometryType == QGis::Point &&
QgsWKBTypes::flatType( wkbType ) == QgsWKBTypes::Point )
{
// Include the x and y coordinates of the point as a derived attribute
QgsPoint pnt = mCanvas->mapSettings().layerToMapCoordinates( layer, feature->constGeometry()->asPoint() );
QString str = QLocale::system().toString( pnt.x(), 'g', 10 );
derivedAttributes.insert( "X", str );
str = QLocale::system().toString( pnt.y(), 'g', 10 );
derivedAttributes.insert( "Y", str );
if ( QgsWKBTypes::hasZ( wkbType ) )
{
str = QLocale::system().toString( static_cast<QgsPointV2*>( feature->constGeometry()->geometry() )->z(), 'g', 10 );
derivedAttributes.insert( "Z", str );
}
if ( QgsWKBTypes::hasM( wkbType ) )
{
str = QLocale::system().toString( static_cast<QgsPointV2*>( feature->constGeometry()->geometry() )->m(), 'g', 10 );
derivedAttributes.insert( "M", str );
}
}
return derivedAttributes;
}
QMap< QString, QString > QgsMapToolIdentify::featureDerivedAttributes( QgsFeature *feature, QgsMapLayer *layer, const QgsPoint& layerPoint )
{
// Calculate derived attributes and insert:
// measure distance or area depending on geometry type
QMap< QString, QString > derivedAttributes;
// init distance/area calculator
QString ellipsoid = QgsProject::instance()->ellipsoid();
QgsDistanceArea calc;
calc.setEllipsoidalMode( mCanvas->hasCrsTransformEnabled() );
calc.setEllipsoid( ellipsoid );
calc.setSourceCrs( layer->crs().srsid() );
QgsWkbTypes::Type wkbType = QgsWkbTypes::NoGeometry;
QgsWkbTypes::GeometryType geometryType = QgsWkbTypes::NullGeometry;
QgsVertexId vId;
QgsPointV2 closestPoint;
if ( feature->hasGeometry() )
{
geometryType = feature->geometry().type();
wkbType = feature->geometry().geometry()->wkbType();
//find closest vertex to clicked point
closestPoint = QgsGeometryUtils::closestVertex( *feature->geometry().geometry(), QgsPointV2( layerPoint.x(), layerPoint.y() ), vId );
}
if ( QgsWkbTypes::isMultiType( wkbType ) )
{
QString str = QLocale::system().toString( static_cast<const QgsGeometryCollection*>( feature->geometry().geometry() )->numGeometries() );
derivedAttributes.insert( tr( "Parts" ), str );
str = QLocale::system().toString( vId.part + 1 );
derivedAttributes.insert( tr( "Part number" ), str );
}
if ( geometryType == QgsWkbTypes::LineGeometry )
{
double dist = calc.measureLength( feature->geometry() );
dist = calc.convertLengthMeasurement( dist, displayDistanceUnits() );
QString str = formatDistance( dist );
derivedAttributes.insert( tr( "Length" ), str );
const QgsCurve* curve = dynamic_cast< const QgsCurve* >( feature->geometry().geometry() );
if ( curve )
{
str = QLocale::system().toString( curve->nCoordinates() );
derivedAttributes.insert( tr( "Vertices" ), str );
//add details of closest vertex to identify point
closestVertexAttributes( *curve, vId, layer, derivedAttributes );
// Add the start and end points in as derived attributes
QgsPoint pnt = mCanvas->mapSettings().layerToMapCoordinates( layer, QgsPoint( curve->startPoint().x(), curve->startPoint().y() ) );
str = formatXCoordinate( pnt );
derivedAttributes.insert( tr( "firstX", "attributes get sorted; translation for lastX should be lexically larger than this one" ), str );
str = formatYCoordinate( pnt );
derivedAttributes.insert( tr( "firstY" ), str );
pnt = mCanvas->mapSettings().layerToMapCoordinates( layer, QgsPoint( curve->endPoint().x(), curve->endPoint().y() ) );
str = formatXCoordinate( pnt );
derivedAttributes.insert( tr( "lastX", "attributes get sorted; translation for firstX should be lexically smaller than this one" ), str );
str = formatYCoordinate( pnt );
derivedAttributes.insert( tr( "lastY" ), str );
}
}
else if ( geometryType == QgsWkbTypes::PolygonGeometry )
{
double area = calc.measureArea( feature->geometry() );
area = calc.convertAreaMeasurement( area, displayAreaUnits() );
QString str = formatArea( area );
derivedAttributes.insert( tr( "Area" ), str );
double perimeter = calc.measurePerimeter( feature->geometry() );
perimeter = calc.convertLengthMeasurement( perimeter, displayDistanceUnits() );
str = formatDistance( perimeter );
derivedAttributes.insert( tr( "Perimeter" ), str );
str = QLocale::system().toString( feature->geometry().geometry()->nCoordinates() );
derivedAttributes.insert( tr( "Vertices" ), str );
//add details of closest vertex to identify point
closestVertexAttributes( *feature->geometry().geometry(), vId, layer, derivedAttributes );
}
else if ( geometryType == QgsWkbTypes::PointGeometry &&
QgsWkbTypes::flatType( wkbType ) == QgsWkbTypes::Point )
{
// Include the x and y coordinates of the point as a derived attribute
QgsPoint pnt = mCanvas->mapSettings().layerToMapCoordinates( layer, feature->geometry().asPoint() );
QString str = formatXCoordinate( pnt );
derivedAttributes.insert( "X", str );
str = formatYCoordinate( pnt );
derivedAttributes.insert( "Y", str );
if ( QgsWkbTypes::hasZ( wkbType ) )
{
str = QLocale::system().toString( static_cast<const QgsPointV2*>( feature->geometry().geometry() )->z(), 'g', 10 );
derivedAttributes.insert( "Z", str );
}
if ( QgsWkbTypes::hasM( wkbType ) )
{
str = QLocale::system().toString( static_cast<const QgsPointV2*>( feature->geometry().geometry() )->m(), 'g', 10 );
derivedAttributes.insert( "M", str );
}
}
return derivedAttributes;
}