bool QgsOverlayUtils::sanitizeIntersectionResult( QgsGeometry &geom, QgsWkbTypes::GeometryType geometryType )
{
if ( geom.isNull() )
{
// TODO: not sure if this ever happens - if it does, that means GEOS failed badly - would be good to have a test for such situation
throw QgsProcessingException( QStringLiteral( "%1\n\n%2" ).arg( QObject::tr( "GEOS geoprocessing error: intersection failed." ), geom.lastError() ) );
}
// Intersection of geometries may give use also geometries we do not want in our results.
// For example, two square polygons touching at the corner have a point as the intersection, but no area.
// In other cases we may get a mixture of geometries in the output - we want to keep only the expected types.
if ( QgsWkbTypes::flatType( geom.wkbType() ) == QgsWkbTypes::GeometryCollection )
{
// try to filter out irrelevant parts with different geometry type than what we want
geom.convertGeometryCollectionToSubclass( geometryType );
if ( geom.isEmpty() )
return false;
}
if ( QgsWkbTypes::geometryType( geom.wkbType() ) != geometryType )
{
// we can't make use of this resulting geometry
return false;
}
// some data providers are picky about the geometries we pass to them: we can't add single-part geometries
// when we promised multi-part geometries, so ensure we have the right type
geom.convertToMultiType();
return true;
}
QgsFeatureList QgsPromoteToMultipartAlgorithm::processFeature( const QgsFeature &feature, QgsProcessingContext &, QgsProcessingFeedback * )
{
QgsFeature f = feature;
if ( f.hasGeometry() && !f.geometry().isMultipart() )
{
QgsGeometry g = f.geometry();
g.convertToMultiType();
f.setGeometry( g );
}
return QgsFeatureList() << f;
}
QVariantMap QgsExtractByExtentAlgorithm::processAlgorithm( const QVariantMap ¶meters, QgsProcessingContext &context, QgsProcessingFeedback *feedback )
{
std::unique_ptr< QgsFeatureSource > featureSource( parameterAsSource( parameters, QStringLiteral( "INPUT" ), context ) );
if ( !featureSource )
return QVariantMap();
QgsRectangle extent = parameterAsExtent( parameters, QStringLiteral( "EXTENT" ), context, featureSource->sourceCrs() );
bool clip = parameterAsBool( parameters, QStringLiteral( "CLIP" ), context );
// if clipping, we force multi output
QgsWkbTypes::Type outType = clip ? QgsWkbTypes::multiType( featureSource->wkbType() ) : featureSource->wkbType();
QString dest;
std::unique_ptr< QgsFeatureSink > sink( parameterAsSink( parameters, QStringLiteral( "OUTPUT" ), context, dest, featureSource->fields(), outType, featureSource->sourceCrs() ) );
if ( !sink )
return QVariantMap();
QgsGeometry clipGeom = parameterAsExtentGeometry( parameters, QStringLiteral( "EXTENT" ), context, featureSource->sourceCrs() );
double step = featureSource->featureCount() > 0 ? 100.0 / featureSource->featureCount() : 1;
QgsFeatureIterator inputIt = featureSource->getFeatures( QgsFeatureRequest().setFilterRect( extent ).setFlags( QgsFeatureRequest::ExactIntersect ) );
QgsFeature f;
int i = -1;
while ( inputIt.nextFeature( f ) )
{
i++;
if ( feedback->isCanceled() )
{
break;
}
if ( clip )
{
QgsGeometry g = f.geometry().intersection( clipGeom );
g.convertToMultiType();
f.setGeometry( g );
}
sink->addFeature( f, QgsFeatureSink::FastInsert );
feedback->setProgress( i * step );
}
QVariantMap outputs;
outputs.insert( QStringLiteral( "OUTPUT" ), dest );
return outputs;
}
//! Makes sure that what came out from difference of two geometries is good to be used in the output
static bool sanitizeDifferenceResult( QgsGeometry &geom )
{
if ( geom.isNull() )
{
// TODO: not sure if this ever happens - if it does, that means GEOS failed badly - would be good to have a test for such situation
throw QgsProcessingException( QStringLiteral( "%1\n\n%2" ).arg( QObject::tr( "GEOS geoprocessing error: difference failed." ), geom.lastError() ) );
}
// if geomB covers the whole source geometry, we get an empty geometry collection
if ( geom.isEmpty() )
return false;
// some data providers are picky about the geometries we pass to them: we can't add single-part geometries
// when we promised multi-part geometries, so ensure we have the right type
geom.convertToMultiType();
return true;
}
QgsFeature QgsFixGeometriesAlgorithm::processFeature( const QgsFeature &feature, QgsProcessingFeedback *feedback )
{
if ( !feature.hasGeometry() )
return feature;
QgsFeature outputFeature = feature;
QgsGeometry outputGeometry = outputFeature.geometry().makeValid();
if ( !outputGeometry )
{
feedback->pushInfo( QObject::tr( "makeValid failed for feature %1 " ).arg( feature.id() ) );
outputFeature.clearGeometry();
return outputFeature;
}
if ( outputGeometry.wkbType() == QgsWkbTypes::Unknown ||
QgsWkbTypes::flatType( outputGeometry.wkbType() ) == QgsWkbTypes::GeometryCollection )
{
// keep only the parts of the geometry collection with correct type
const QVector< QgsGeometry > tmpGeometries = outputGeometry.asGeometryCollection();
QVector< QgsGeometry > matchingParts;
for ( const QgsGeometry &g : tmpGeometries )
{
if ( g.type() == feature.geometry().type() )
matchingParts << g;
}
if ( !matchingParts.empty() )
outputGeometry = QgsGeometry::collectGeometry( matchingParts );
else
outputGeometry = QgsGeometry();
}
outputGeometry.convertToMultiType();
outputFeature.setGeometry( outputGeometry );
return outputFeature;
}
QVariantMap QgsTransectAlgorithm::processAlgorithm( const QVariantMap ¶meters, QgsProcessingContext &context, QgsProcessingFeedback *feedback )
{
Side orientation = static_cast< QgsTransectAlgorithm::Side >( parameterAsInt( parameters, QStringLiteral( "SIDE" ), context ) );
double angle = fabs( parameterAsDouble( parameters, QStringLiteral( "ANGLE" ), context ) );
bool dynamicAngle = QgsProcessingParameters::isDynamic( parameters, QStringLiteral( "ANGLE" ) );
QgsProperty angleProperty;
if ( dynamicAngle )
angleProperty = parameters.value( QStringLiteral( "ANGLE" ) ).value< QgsProperty >();
double length = parameterAsDouble( parameters, QStringLiteral( "LENGTH" ), context );
bool dynamicLength = QgsProcessingParameters::isDynamic( parameters, QStringLiteral( "LENGTH" ) );
QgsProperty lengthProperty;
if ( dynamicLength )
lengthProperty = parameters.value( QStringLiteral( "LENGTH" ) ).value< QgsProperty >();
if ( orientation == QgsTransectAlgorithm::Both )
length /= 2.0;
std::unique_ptr< QgsFeatureSource > source( parameterAsSource( parameters, QStringLiteral( "INPUT" ), context ) );
if ( !source )
throw QgsProcessingException( invalidSourceError( parameters, QStringLiteral( "INPUT" ) ) );
QgsExpressionContext expressionContext = createExpressionContext( parameters, context, dynamic_cast< QgsProcessingFeatureSource * >( source.get() ) );
QgsFields fields = source->fields();
fields.append( QgsField( QStringLiteral( "TR_FID" ), QVariant::Int, QString(), 20 ) );
fields.append( QgsField( QStringLiteral( "TR_ID" ), QVariant::Int, QString(), 20 ) );
fields.append( QgsField( QStringLiteral( "TR_SEGMENT" ), QVariant::Int, QString(), 20 ) );
fields.append( QgsField( QStringLiteral( "TR_ANGLE" ), QVariant::Double, QString(), 5, 2 ) );
fields.append( QgsField( QStringLiteral( "TR_LENGTH" ), QVariant::Double, QString(), 20, 6 ) );
fields.append( QgsField( QStringLiteral( "TR_ORIENT" ), QVariant::Int, QString(), 1 ) );
QgsWkbTypes::Type outputWkb = QgsWkbTypes::LineString;
if ( QgsWkbTypes::hasZ( source->wkbType() ) )
outputWkb = QgsWkbTypes::addZ( outputWkb );
if ( QgsWkbTypes::hasM( source->wkbType() ) )
outputWkb = QgsWkbTypes::addM( outputWkb );
QString dest;
std::unique_ptr< QgsFeatureSink > sink( parameterAsSink( parameters, QStringLiteral( "OUTPUT" ), context, dest, fields,
outputWkb, source->sourceCrs(), QgsFeatureSink::RegeneratePrimaryKey ) );
if ( !sink )
throw QgsProcessingException( invalidSinkError( parameters, QStringLiteral( "OUTPUT" ) ) );
QgsFeatureIterator features = source->getFeatures( );
int current = -1;
int number = 0;
double step = source->featureCount() > 0 ? 100.0 / source->featureCount() : 1;
QgsFeature feat;
while ( features.nextFeature( feat ) )
{
current++;
if ( feedback->isCanceled() )
{
break;
}
feedback->setProgress( current * step );
if ( !feat.hasGeometry() )
continue;
QgsGeometry inputGeometry = feat.geometry();
if ( dynamicLength || dynamicAngle )
{
expressionContext.setFeature( feat );
}
double evaluatedLength = length;
if ( dynamicLength )
evaluatedLength = lengthProperty.valueAsDouble( context.expressionContext(), length );
double evaluatedAngle = angle;
if ( dynamicAngle )
evaluatedAngle = angleProperty.valueAsDouble( context.expressionContext(), angle );
inputGeometry.convertToMultiType();
const QgsMultiLineString *multiLine = static_cast< const QgsMultiLineString * >( inputGeometry.constGet() );
for ( int id = 0; id < multiLine->numGeometries(); ++id )
{
const QgsLineString *line = static_cast< const QgsLineString * >( multiLine->geometryN( id ) );
QgsAbstractGeometry::vertex_iterator it = line->vertices_begin();
while ( it != line->vertices_end() )
{
QgsVertexId vertexId = it.vertexId();
int i = vertexId.vertex;
QgsFeature outFeat;
QgsAttributes attrs = feat.attributes();
attrs << current << number << i + 1 << evaluatedAngle <<
( ( orientation == QgsTransectAlgorithm::Both ) ? evaluatedLength * 2 : evaluatedLength ) <<
orientation;
outFeat.setAttributes( attrs );
double angleAtVertex = line->vertexAngle( vertexId );
outFeat.setGeometry( calcTransect( *it, angleAtVertex, evaluatedLength, orientation, evaluatedAngle ) );
sink->addFeature( outFeat, QgsFeatureSink::FastInsert );
number++;
it++;
}
}
}
QVariantMap outputs;
outputs.insert( QStringLiteral( "OUTPUT" ), dest );
return outputs;
}
void QgsMapToolOffsetCurve::applyOffset( double offset, Qt::KeyboardModifiers modifiers )
{
if ( !mLayer || offset == 0.0 )
{
cancel();
notifyNotVectorLayer();
return;
}
updateGeometryAndRubberBand( offset );
// no modification
if ( !mGeometryModified )
{
mLayer->destroyEditCommand();
cancel();
return;
}
if ( mModifiedPart >= 0 )
{
QgsGeometry geometry;
int partIndex = 0;
QgsWkbTypes::Type geomType = mOriginalGeometry.wkbType();
if ( QgsWkbTypes::geometryType( geomType ) == QgsWkbTypes::LineGeometry )
{
QgsMultiPolylineXY newMultiLine;
QgsMultiPolylineXY multiLine = mOriginalGeometry.asMultiPolyline();
QgsMultiPolylineXY::const_iterator it = multiLine.constBegin();
for ( ; it != multiLine.constEnd(); ++it )
{
if ( partIndex == mModifiedPart )
{
newMultiLine.append( mModifiedGeometry.asPolyline() );
}
else
{
newMultiLine.append( *it );
}
partIndex++;
}
geometry = QgsGeometry::fromMultiPolylineXY( newMultiLine );
}
else
{
QgsMultiPolygonXY newMultiPoly;
const QgsMultiPolygonXY multiPoly = mOriginalGeometry.asMultiPolygon();
QgsMultiPolygonXY::const_iterator multiPolyIt = multiPoly.constBegin();
for ( ; multiPolyIt != multiPoly.constEnd(); ++multiPolyIt )
{
if ( partIndex == mModifiedPart )
{
if ( mModifiedGeometry.isMultipart() )
{
// not a ring
if ( mModifiedRing <= 0 )
{
// part became mulitpolygon, that means discard original rings from the part
newMultiPoly += mModifiedGeometry.asMultiPolygon();
}
else
{
// ring became multipolygon, oh boy!
QgsPolygonXY newPoly;
int ringIndex = 0;
QgsPolygonXY::const_iterator polyIt = multiPolyIt->constBegin();
for ( ; polyIt != multiPolyIt->constEnd(); ++polyIt )
{
if ( ringIndex == mModifiedRing )
{
const QgsMultiPolygonXY ringParts = mModifiedGeometry.asMultiPolygon();
QgsPolygonXY newRings;
QgsMultiPolygonXY::const_iterator ringIt = ringParts.constBegin();
for ( ; ringIt != ringParts.constEnd(); ++ringIt )
{
// the different parts of the new rings cannot have rings themselves
newRings.append( ringIt->at( 0 ) );
}
newPoly += newRings;
}
else
{
newPoly.append( *polyIt );
}
ringIndex++;
}
newMultiPoly.append( newPoly );
}
}
else
{
// original part had no ring
if ( mModifiedRing == -1 )
{
newMultiPoly.append( mModifiedGeometry.asPolygon() );
}
else
{
QgsPolygonXY newPoly;
int ringIndex = 0;
QgsPolygonXY::const_iterator polyIt = multiPolyIt->constBegin();
for ( ; polyIt != multiPolyIt->constEnd(); ++polyIt )
{
if ( ringIndex == mModifiedRing )
{
newPoly.append( mModifiedGeometry.asPolygon().at( 0 ) );
}
else
{
newPoly.append( *polyIt );
}
ringIndex++;
}
newMultiPoly.append( newPoly );
}
}
}
else
{
newMultiPoly.append( *multiPolyIt );
}
partIndex++;
}
geometry = QgsGeometry::fromMultiPolygonXY( newMultiPoly );
}
geometry.convertToMultiType();
mModifiedGeometry = geometry;
}
else if ( mModifiedRing >= 0 )
{
// original geometry had some rings
if ( mModifiedGeometry.isMultipart() )
{
// not a ring
if ( mModifiedRing == 0 )
{
// polygon became mulitpolygon, that means discard original rings from the part
// keep the modified geometry as is
}
else
{
QgsPolygonXY newPoly;
const QgsPolygonXY poly = mOriginalGeometry.asPolygon();
// ring became multipolygon, oh boy!
int ringIndex = 0;
QgsPolygonXY::const_iterator polyIt = poly.constBegin();
for ( ; polyIt != poly.constEnd(); ++polyIt )
{
if ( ringIndex == mModifiedRing )
{
QgsMultiPolygonXY ringParts = mModifiedGeometry.asMultiPolygon();
QgsPolygonXY newRings;
QgsMultiPolygonXY::const_iterator ringIt = ringParts.constBegin();
for ( ; ringIt != ringParts.constEnd(); ++ringIt )
{
// the different parts of the new rings cannot have rings themselves
newRings.append( ringIt->at( 0 ) );
}
newPoly += newRings;
}
else
{
newPoly.append( *polyIt );
}
ringIndex++;
}
mModifiedGeometry = QgsGeometry::fromPolygonXY( newPoly );
}
}
else
{
// simple case where modified geom is a polygon (not multi)
QgsPolygonXY newPoly;
const QgsPolygonXY poly = mOriginalGeometry.asPolygon();
int ringIndex = 0;
QgsPolygonXY::const_iterator polyIt = poly.constBegin();
for ( ; polyIt != poly.constEnd(); ++polyIt )
{
if ( ringIndex == mModifiedRing )
{
newPoly.append( mModifiedGeometry.asPolygon().at( 0 ) );
}
else
{
newPoly.append( *polyIt );
}
ringIndex++;
}
mModifiedGeometry = QgsGeometry::fromPolygonXY( newPoly );
}
}
if ( !mModifiedGeometry.isGeosValid() )
{
emit messageEmitted( tr( "Generated geometry is not valid." ), Qgis::Critical );
// no cancel, continue editing.
return;
}
mLayer->beginEditCommand( tr( "Offset curve" ) );
bool editOk;
if ( !mCtrlHeldOnFirstClick && !( modifiers & Qt::ControlModifier ) )
{
editOk = mLayer->changeGeometry( mModifiedFeature, mModifiedGeometry );
}
else
{
QgsFeature f;
f.setGeometry( mModifiedGeometry );
//add empty values for all fields (allows inserting attribute values via the feature form in the same session)
QgsAttributes attrs( mLayer->fields().count() );
const QgsFields &fields = mLayer->fields();
for ( int idx = 0; idx < fields.count(); ++idx )
{
attrs[idx] = QVariant();
}
f.setAttributes( attrs );
editOk = mLayer->addFeature( f );
}
if ( editOk )
{
mLayer->endEditCommand();
}
else
{
mLayer->destroyEditCommand();
emit messageEmitted( QStringLiteral( "Could not apply offset" ), Qgis::Critical );
}
deleteRubberBandAndGeometry();
deleteUserInputWidget();
mLayer->triggerRepaint();
mLayer = nullptr;
}
int QgsVectorLayerEditUtils::splitParts( const QList<QgsPoint>& splitLine, bool topologicalEditing )
{
if ( !L->hasGeometryType() )
return 4;
double xMin, yMin, xMax, yMax;
QgsRectangle bBox; //bounding box of the split line
int returnCode = 0;
int splitFunctionReturn; //return code of QgsGeometry::splitGeometry
int numberOfSplittedParts = 0;
QgsFeatureIterator fit;
if ( L->selectedFeatureCount() > 0 ) //consider only the selected features if there is a selection
{
fit = L->selectedFeaturesIterator();
}
else //else consider all the feature that intersect the bounding box of the split line
{
if ( boundingBoxFromPointList( splitLine, xMin, yMin, xMax, yMax ) == 0 )
{
bBox.setXMinimum( xMin );
bBox.setYMinimum( yMin );
bBox.setXMaximum( xMax );
bBox.setYMaximum( yMax );
}
else
{
return 1;
}
if ( bBox.isEmpty() )
{
//if the bbox is a line, try to make a square out of it
if ( bBox.width() == 0.0 && bBox.height() > 0 )
{
bBox.setXMinimum( bBox.xMinimum() - bBox.height() / 2 );
bBox.setXMaximum( bBox.xMaximum() + bBox.height() / 2 );
}
else if ( bBox.height() == 0.0 && bBox.width() > 0 )
{
bBox.setYMinimum( bBox.yMinimum() - bBox.width() / 2 );
bBox.setYMaximum( bBox.yMaximum() + bBox.width() / 2 );
}
else
{
//If we have a single point, we still create a non-null box
double bufferDistance = 0.000001;
if ( L->crs().isGeographic() )
bufferDistance = 0.00000001;
bBox.setXMinimum( bBox.xMinimum() - bufferDistance );
bBox.setXMaximum( bBox.xMaximum() + bufferDistance );
bBox.setYMinimum( bBox.yMinimum() - bufferDistance );
bBox.setYMaximum( bBox.yMaximum() + bufferDistance );
}
}
fit = L->getFeatures( QgsFeatureRequest().setFilterRect( bBox ).setFlags( QgsFeatureRequest::ExactIntersect ) );
}
int addPartRet = 0;
QgsFeature feat;
while ( fit.nextFeature( feat ) )
{
QList<QgsGeometry> newGeometries;
QList<QgsPoint> topologyTestPoints;
QgsGeometry featureGeom = feat.geometry();
splitFunctionReturn = featureGeom.splitGeometry( splitLine, newGeometries, topologicalEditing, topologyTestPoints );
if ( splitFunctionReturn == 0 )
{
//add new parts
if ( !newGeometries.isEmpty() )
featureGeom.convertToMultiType();
for ( int i = 0; i < newGeometries.size(); ++i )
{
addPartRet = featureGeom.addPart( newGeometries.at( i ) );
if ( addPartRet )
break;
}
// For test only: Exception already thrown here...
// feat.geometry()->asWkb();
if ( !addPartRet )
{
L->editBuffer()->changeGeometry( feat.id(), featureGeom );
}
else
{
// Test addPartRet
switch ( addPartRet )
{
case 1:
QgsDebugMsg( "Not a multipolygon" );
break;
case 2:
QgsDebugMsg( "Not a valid geometry" );
break;
case 3:
QgsDebugMsg( "New polygon ring" );
break;
}
}
L->editBuffer()->changeGeometry( feat.id(), featureGeom );
if ( topologicalEditing )
{
QList<QgsPoint>::const_iterator topol_it = topologyTestPoints.constBegin();
for ( ; topol_it != topologyTestPoints.constEnd(); ++topol_it )
{
addTopologicalPoints( *topol_it );
}
}
++numberOfSplittedParts;
}
else if ( splitFunctionReturn > 1 ) //1 means no split but also no error
{
returnCode = splitFunctionReturn;
}
}
if ( numberOfSplittedParts == 0 && L->selectedFeatureCount() > 0 && returnCode == 0 )
{
//There is a selection but no feature has been split.
//Maybe user forgot that only the selected features are split
returnCode = 4;
}
return returnCode;
}
QgsGeometry::OperationResult QgsVectorLayerEditUtils::splitParts( const QVector<QgsPointXY> &splitLine, bool topologicalEditing )
{
if ( !mLayer->isSpatial() )
return QgsGeometry::InvalidBaseGeometry;
double xMin, yMin, xMax, yMax;
QgsRectangle bBox; //bounding box of the split line
QgsGeometry::OperationResult returnCode = QgsGeometry::OperationResult::Success;
QgsGeometry::OperationResult splitFunctionReturn; //return code of QgsGeometry::splitGeometry
int numberOfSplitParts = 0;
QgsFeatureIterator fit;
if ( mLayer->selectedFeatureCount() > 0 ) //consider only the selected features if there is a selection
{
fit = mLayer->getSelectedFeatures();
}
else //else consider all the feature that intersect the bounding box of the split line
{
if ( boundingBoxFromPointList( splitLine, xMin, yMin, xMax, yMax ) )
{
bBox.setXMinimum( xMin );
bBox.setYMinimum( yMin );
bBox.setXMaximum( xMax );
bBox.setYMaximum( yMax );
}
else
{
return QgsGeometry::OperationResult::InvalidInputGeometryType;
}
if ( bBox.isEmpty() )
{
//if the bbox is a line, try to make a square out of it
if ( bBox.width() == 0.0 && bBox.height() > 0 )
{
bBox.setXMinimum( bBox.xMinimum() - bBox.height() / 2 );
bBox.setXMaximum( bBox.xMaximum() + bBox.height() / 2 );
}
else if ( bBox.height() == 0.0 && bBox.width() > 0 )
{
bBox.setYMinimum( bBox.yMinimum() - bBox.width() / 2 );
bBox.setYMaximum( bBox.yMaximum() + bBox.width() / 2 );
}
else
{
//If we have a single point, we still create a non-null box
double bufferDistance = 0.000001;
if ( mLayer->crs().isGeographic() )
bufferDistance = 0.00000001;
bBox.setXMinimum( bBox.xMinimum() - bufferDistance );
bBox.setXMaximum( bBox.xMaximum() + bufferDistance );
bBox.setYMinimum( bBox.yMinimum() - bufferDistance );
bBox.setYMaximum( bBox.yMaximum() + bufferDistance );
}
}
fit = mLayer->getFeatures( QgsFeatureRequest().setFilterRect( bBox ).setFlags( QgsFeatureRequest::ExactIntersect ) );
}
QgsGeometry::OperationResult addPartRet = QgsGeometry::OperationResult::Success;
QgsFeature feat;
while ( fit.nextFeature( feat ) )
{
QVector<QgsGeometry> newGeometries;
QVector<QgsPointXY> topologyTestPoints;
QgsGeometry featureGeom = feat.geometry();
splitFunctionReturn = featureGeom.splitGeometry( splitLine, newGeometries, topologicalEditing, topologyTestPoints );
if ( splitFunctionReturn == 0 )
{
//add new parts
if ( !newGeometries.isEmpty() )
featureGeom.convertToMultiType();
for ( int i = 0; i < newGeometries.size(); ++i )
{
addPartRet = featureGeom.addPart( newGeometries.at( i ) );
if ( addPartRet )
break;
}
// For test only: Exception already thrown here...
// feat.geometry()->asWkb();
if ( !addPartRet )
{
mLayer->editBuffer()->changeGeometry( feat.id(), featureGeom );
}
if ( topologicalEditing )
{
QVector<QgsPointXY>::const_iterator topol_it = topologyTestPoints.constBegin();
for ( ; topol_it != topologyTestPoints.constEnd(); ++topol_it )
{
addTopologicalPoints( *topol_it );
}
}
++numberOfSplitParts;
}
else if ( splitFunctionReturn != QgsGeometry::OperationResult::Success && splitFunctionReturn != QgsGeometry::OperationResult::NothingHappened )
{
returnCode = splitFunctionReturn;
}
}
if ( numberOfSplitParts == 0 && mLayer->selectedFeatureCount() > 0 && returnCode == QgsGeometry::Success )
{
//There is a selection but no feature has been split.
//Maybe user forgot that only the selected features are split
returnCode = QgsGeometry::OperationResult::NothingHappened;
}
return returnCode;
}
QVariantMap QgsCollectorAlgorithm::processCollection( const QVariantMap ¶meters, QgsProcessingContext &context, QgsProcessingFeedback *feedback,
const std::function<QgsGeometry( const QVector< QgsGeometry >& )> &collector, int maxQueueLength )
{
std::unique_ptr< QgsFeatureSource > source( parameterAsSource( parameters, QStringLiteral( "INPUT" ), context ) );
if ( !source )
throw QgsProcessingException( invalidSourceError( parameters, QStringLiteral( "INPUT" ) ) );
QString dest;
std::unique_ptr< QgsFeatureSink > sink( parameterAsSink( parameters, QStringLiteral( "OUTPUT" ), context, dest, source->fields(), QgsWkbTypes::multiType( source->wkbType() ), source->sourceCrs() ) );
if ( !sink )
throw QgsProcessingException( invalidSinkError( parameters, QStringLiteral( "OUTPUT" ) ) );
QStringList fields = parameterAsFields( parameters, QStringLiteral( "FIELD" ), context );
long count = source->featureCount();
QgsFeature f;
QgsFeatureIterator it = source->getFeatures();
double step = count > 0 ? 100.0 / count : 1;
int current = 0;
if ( fields.isEmpty() )
{
// dissolve all - not using fields
bool firstFeature = true;
// we dissolve geometries in blocks using unaryUnion
QVector< QgsGeometry > geomQueue;
QgsFeature outputFeature;
while ( it.nextFeature( f ) )
{
if ( feedback->isCanceled() )
{
break;
}
if ( firstFeature )
{
outputFeature = f;
firstFeature = false;
}
if ( f.hasGeometry() && !f.geometry().isNull() )
{
geomQueue.append( f.geometry() );
if ( maxQueueLength > 0 && geomQueue.length() > maxQueueLength )
{
// queue too long, combine it
QgsGeometry tempOutputGeometry = collector( geomQueue );
geomQueue.clear();
geomQueue << tempOutputGeometry;
}
}
feedback->setProgress( current * step );
current++;
}
outputFeature.setGeometry( collector( geomQueue ) );
sink->addFeature( outputFeature, QgsFeatureSink::FastInsert );
}
else
{
QList< int > fieldIndexes;
const auto constFields = fields;
for ( const QString &field : constFields )
{
int index = source->fields().lookupField( field );
if ( index >= 0 )
fieldIndexes << index;
}
QHash< QVariant, QgsAttributes > attributeHash;
QHash< QVariant, QVector< QgsGeometry > > geometryHash;
while ( it.nextFeature( f ) )
{
if ( feedback->isCanceled() )
{
break;
}
QVariantList indexAttributes;
const auto constFieldIndexes = fieldIndexes;
for ( int index : constFieldIndexes )
{
indexAttributes << f.attribute( index );
}
if ( !attributeHash.contains( indexAttributes ) )
{
// keep attributes of first feature
attributeHash.insert( indexAttributes, f.attributes() );
}
if ( f.hasGeometry() && !f.geometry().isNull() )
{
geometryHash[ indexAttributes ].append( f.geometry() );
}
}
int numberFeatures = attributeHash.count();
QHash< QVariant, QgsAttributes >::const_iterator attrIt = attributeHash.constBegin();
for ( ; attrIt != attributeHash.constEnd(); ++attrIt )
{
if ( feedback->isCanceled() )
{
break;
}
QgsFeature outputFeature;
if ( geometryHash.contains( attrIt.key() ) )
{
QgsGeometry geom = collector( geometryHash.value( attrIt.key() ) );
if ( !geom.isMultipart() )
{
geom.convertToMultiType();
}
outputFeature.setGeometry( geom );
}
outputFeature.setAttributes( attrIt.value() );
sink->addFeature( outputFeature, QgsFeatureSink::FastInsert );
feedback->setProgress( current * 100.0 / numberFeatures );
current++;
}
}
QVariantMap outputs;
outputs.insert( QStringLiteral( "OUTPUT" ), dest );
return outputs;
}
bool QgsOgrFeatureIterator::readFeature( gdal::ogr_feature_unique_ptr fet, QgsFeature &feature ) const
{
feature.setId( OGR_F_GetFID( fet.get() ) );
feature.initAttributes( mSource->mFields.count() );
feature.setFields( mSource->mFields ); // allow name-based attribute lookups
bool useIntersect = !mRequest.filterRect().isNull();
bool geometryTypeFilter = mSource->mOgrGeometryTypeFilter != wkbUnknown;
if ( mFetchGeometry || useIntersect || geometryTypeFilter )
{
OGRGeometryH geom = OGR_F_GetGeometryRef( fet.get() );
if ( geom )
{
QgsGeometry g = QgsOgrUtils::ogrGeometryToQgsGeometry( geom );
// Insure that multipart datasets return multipart geometry
if ( QgsWkbTypes::isMultiType( mSource->mWkbType ) && !g.isMultipart() )
{
g.convertToMultiType();
}
feature.setGeometry( g );
}
else
feature.clearGeometry();
if ( mSource->mOgrGeometryTypeFilter == wkbGeometryCollection &&
geom && wkbFlatten( OGR_G_GetGeometryType( geom ) ) == wkbGeometryCollection )
{
// OK
}
else if ( ( useIntersect && ( !feature.hasGeometry()
|| ( mRequest.flags() & QgsFeatureRequest::ExactIntersect && !feature.geometry().intersects( mFilterRect ) )
|| ( !( mRequest.flags() & QgsFeatureRequest::ExactIntersect ) && !feature.geometry().boundingBoxIntersects( mFilterRect ) )
)
)
|| ( geometryTypeFilter && ( !feature.hasGeometry() || QgsOgrProvider::ogrWkbSingleFlatten( ( OGRwkbGeometryType )feature.geometry().wkbType() ) != mSource->mOgrGeometryTypeFilter ) ) )
{
return false;
}
}
if ( !mFetchGeometry )
{
feature.clearGeometry();
}
// fetch attributes
if ( mRequest.flags() & QgsFeatureRequest::SubsetOfAttributes )
{
QgsAttributeList attrs = mRequest.subsetOfAttributes();
for ( QgsAttributeList::const_iterator it = attrs.constBegin(); it != attrs.constEnd(); ++it )
{
getFeatureAttribute( fet.get(), feature, *it );
}
}
else
{
// all attributes
const auto fieldCount = mSource->mFields.count();
for ( int idx = 0; idx < fieldCount; ++idx )
{
getFeatureAttribute( fet.get(), feature, idx );
}
}
return true;
}