bool QgsRasterLayerRenderer::render()
{
if ( !mRasterViewPort )
return true; // outside of layer extent - nothing to do
//R->draw( mPainter, mRasterViewPort, &mMapToPixel );
QTime time;
time.start();
//
//
// The goal here is to make as many decisions as possible early on (outside of the rendering loop)
// so that we can maximise performance of the rendering process. So now we check which drawing
// procedure to use :
//
QgsRasterProjector *projector = mPipe->projector();
// TODO add a method to interface to get provider and get provider
// params in QgsRasterProjector
if ( projector )
{
projector->setCRS( mRasterViewPort->mSrcCRS, mRasterViewPort->mDestCRS );
}
// Drawer to pipe?
QgsRasterIterator iterator( mPipe->last() );
QgsRasterDrawer drawer( &iterator );
drawer.draw( mPainter, mRasterViewPort, mMapToPixel );
QgsDebugMsg( QString( "total raster draw time (ms): %1" ).arg( time.elapsed(), 5 ) );
return true;
}
QByteArray* QgsWCSServer::getCoverage()
{
QStringList wcsLayersId = mConfigParser->wcsLayers();
QList<QgsMapLayer*> layerList;
QStringList mErrors = QStringList();
//defining coverage name
QString coveName = "";
//read COVERAGE
QMap<QString, QString>::const_iterator cove_name_it = mParameters.find( "COVERAGE" );
if ( cove_name_it != mParameters.end() )
{
coveName = cove_name_it.value();
}
if ( coveName == "" )
{
QMap<QString, QString>::const_iterator cove_name_it = mParameters.find( "IDENTIFIER" );
if ( cove_name_it != mParameters.end() )
{
coveName = cove_name_it.value();
}
}
if ( coveName == "" )
{
mErrors << QString( "COVERAGE is mandatory" );
}
layerList = mConfigParser->mapLayerFromCoverage( coveName );
if ( layerList.size() < 1 )
{
mErrors << QString( "The layer for the COVERAGE '%1' is not found" ).arg( coveName );
}
bool conversionSuccess;
// BBOX
bool bboxOk = false;
double minx = 0.0, miny = 0.0, maxx = 0.0, maxy = 0.0;
// WIDTh and HEIGHT
int width = 0, height = 0;
// CRS
QString crs = "";
// read BBOX
QMap<QString, QString>::const_iterator bbIt = mParameters.find( "BBOX" );
if ( bbIt == mParameters.end() )
{
minx = 0; miny = 0; maxx = 0; maxy = 0;
}
else
{
bboxOk = true;
QString bbString = bbIt.value();
minx = bbString.section( ",", 0, 0 ).toDouble( &conversionSuccess );
if ( !conversionSuccess ) {bboxOk = false;}
miny = bbString.section( ",", 1, 1 ).toDouble( &conversionSuccess );
if ( !conversionSuccess ) {bboxOk = false;}
maxx = bbString.section( ",", 2, 2 ).toDouble( &conversionSuccess );
if ( !conversionSuccess ) {bboxOk = false;}
maxy = bbString.section( ",", 3, 3 ).toDouble( &conversionSuccess );
if ( !conversionSuccess ) {bboxOk = false;}
}
if ( !bboxOk )
{
mErrors << QString( "The BBOX is mandatory and has to be xx.xxx,yy.yyy,xx.xxx,yy.yyy" );
}
// read WIDTH
width = mParameters.value( "WIDTH", "0" ).toInt( &conversionSuccess );
if ( !conversionSuccess )
width = 0;
// read HEIGHT
height = mParameters.value( "HEIGHT", "0" ).toInt( &conversionSuccess );
if ( !conversionSuccess )
{
height = 0;
}
if ( width < 0 || height < 0 )
{
mErrors << QString( "The WIDTH and HEIGHT are mandatory and have to be integer" );
}
crs = mParameters.value( "CRS", "" );
if ( crs == "" )
{
mErrors << QString( "The CRS is mandatory" );
}
if ( mErrors.count() != 0 )
{
throw QgsMapServiceException( "RequestNotWellFormed", mErrors.join( ". " ) );
}
QgsCoordinateReferenceSystem requestCRS = QgsCRSCache::instance()->crsByAuthId( crs );
if ( !requestCRS.isValid() )
{
mErrors << QString( "Could not create request CRS" );
throw QgsMapServiceException( "RequestNotWellFormed", mErrors.join( ". " ) );
}
QgsRectangle rect( minx, miny, maxx, maxy );
QgsMapLayer* layer = layerList.at( 0 );
QgsRasterLayer* rLayer = dynamic_cast<QgsRasterLayer*>( layer );
if ( rLayer && wcsLayersId.contains( rLayer->id() ) )
{
// RESPONSE_CRS
QgsCoordinateReferenceSystem responseCRS = rLayer->crs();
crs = mParameters.value( "RESPONSE_CRS", "" );
if ( crs != "" )
{
responseCRS = QgsCRSCache::instance()->crsByAuthId( crs );
if ( !responseCRS.isValid() )
{
responseCRS = rLayer->crs();
}
}
// transform rect
if ( requestCRS != rLayer->crs() )
{
QgsCoordinateTransform t( requestCRS, rLayer->crs() );
rect = t.transformBoundingBox( rect );
}
QTemporaryFile tempFile;
tempFile.open();
QgsRasterFileWriter fileWriter( tempFile.fileName() );
// clone pipe/provider
QgsRasterPipe* pipe = new QgsRasterPipe();
if ( !pipe->set( rLayer->dataProvider()->clone() ) )
{
mErrors << QString( "Cannot set pipe provider" );
throw QgsMapServiceException( "RequestNotWellFormed", mErrors.join( ". " ) );
}
// add projector if necessary
if ( responseCRS != rLayer->crs() )
{
QgsRasterProjector * projector = new QgsRasterProjector;
projector->setCRS( rLayer->crs(), responseCRS );
if ( !pipe->insert( 2, projector ) )
{
mErrors << QString( "Cannot set pipe projector" );
throw QgsMapServiceException( "RequestNotWellFormed", mErrors.join( ". " ) );
}
}
QgsRasterFileWriter::WriterError err = fileWriter.writeRaster( pipe, width, height, rect, responseCRS );
if ( err != QgsRasterFileWriter::NoError )
{
mErrors << QString( "Cannot write raster error code: %1" ).arg( err );
throw QgsMapServiceException( "RequestNotWellFormed", mErrors.join( ". " ) );
}
delete pipe;
QByteArray* ba = 0;
ba = new QByteArray();
*ba = tempFile.readAll();
return ba;
}
return 0;
}
int QgsRasterCalculator::processCalculation( QProgressDialog* p )
{
//prepare search string / tree
QString errorString;
QgsRasterCalcNode* calcNode = QgsRasterCalcNode::parseRasterCalcString( mFormulaString, errorString );
if ( !calcNode )
{
//error
return static_cast<int>( ParserError );
}
QMap< QString, QgsRasterBlock* > inputBlocks;
QVector<QgsRasterCalculatorEntry>::const_iterator it = mRasterEntries.constBegin();
for ( ; it != mRasterEntries.constEnd(); ++it )
{
if ( !it->raster ) // no raster layer in entry
{
delete calcNode;
qDeleteAll( inputBlocks );
return static_cast< int >( InputLayerError );
}
QgsRasterBlock* block = nullptr;
// if crs transform needed
if ( it->raster->crs() != mOutputCrs )
{
QgsRasterProjector proj;
proj.setCRS( it->raster->crs(), mOutputCrs );
proj.setInput( it->raster->dataProvider() );
proj.setPrecision( QgsRasterProjector::Exact );
block = proj.block( it->bandNumber, mOutputRectangle, mNumOutputColumns, mNumOutputRows );
}
else
{
block = it->raster->dataProvider()->block( it->bandNumber, mOutputRectangle, mNumOutputColumns, mNumOutputRows );
}
if ( block->isEmpty() )
{
delete block;
delete calcNode;
qDeleteAll( inputBlocks );
return static_cast<int>( MemoryError );
}
inputBlocks.insert( it->ref, block );
}
//open output dataset for writing
GDALDriverH outputDriver = openOutputDriver();
if ( !outputDriver )
{
return static_cast< int >( CreateOutputError );
}
GDALDatasetH outputDataset = openOutputFile( outputDriver );
GDALSetProjection( outputDataset, mOutputCrs.toWkt().toLocal8Bit().data() );
GDALRasterBandH outputRasterBand = GDALGetRasterBand( outputDataset, 1 );
float outputNodataValue = -FLT_MAX;
GDALSetRasterNoDataValue( outputRasterBand, outputNodataValue );
if ( p )
{
p->setMaximum( mNumOutputRows );
}
QgsRasterMatrix resultMatrix;
resultMatrix.setNodataValue( outputNodataValue );
//read / write line by line
for ( int i = 0; i < mNumOutputRows; ++i )
{
if ( p )
{
p->setValue( i );
}
if ( p && p->wasCanceled() )
{
break;
}
if ( calcNode->calculate( inputBlocks, resultMatrix, i ) )
{
bool resultIsNumber = resultMatrix.isNumber();
float* calcData = new float[mNumOutputColumns];
for ( int j = 0; j < mNumOutputColumns; ++j )
{
calcData[j] = ( float )( resultIsNumber ? resultMatrix.number() : resultMatrix.data()[j] );
}
//write scanline to the dataset
if ( GDALRasterIO( outputRasterBand, GF_Write, 0, i, mNumOutputColumns, 1, calcData, mNumOutputColumns, 1, GDT_Float32, 0, 0 ) != CE_None )
{
qWarning( "RasterIO error!" );
}
delete[] calcData;
}
}
if ( p )
{
p->setValue( mNumOutputRows );
}
//close datasets and release memory
delete calcNode;
qDeleteAll( inputBlocks );
inputBlocks.clear();
if ( p && p->wasCanceled() )
{
//delete the dataset without closing (because it is faster)
GDALDeleteDataset( outputDriver, TO8F( mOutputFile ) );
return static_cast< int >( Cancelled );
}
GDALClose( outputDataset );
return static_cast< int >( Success );
}
QgsRasterCalculator::Result QgsRasterCalculator::processCalculation( QgsFeedback *feedback )
{
mLastError.clear();
//prepare search string / tree
std::unique_ptr< QgsRasterCalcNode > calcNode( QgsRasterCalcNode::parseRasterCalcString( mFormulaString, mLastError ) );
if ( !calcNode )
{
//error
return ParserError;
}
// Check input layers and bands
for ( const auto &entry : qgis::as_const( mRasterEntries ) )
{
if ( !entry.raster ) // no raster layer in entry
{
mLastError = QObject::tr( "No raster layer for entry %1" ).arg( entry.ref );
return InputLayerError;
}
if ( entry.bandNumber <= 0 || entry.bandNumber > entry.raster->bandCount() )
{
mLastError = QObject::tr( "Band number %1 is not valid for entry %2" ).arg( entry.bandNumber ).arg( entry.ref );
return BandError;
}
}
#ifdef HAVE_OPENCL
// Check for matrix nodes, GPU implementation does not support them
QList<const QgsRasterCalcNode *> nodeList;
if ( QgsOpenClUtils::enabled() && QgsOpenClUtils::available() && calcNode->findNodes( QgsRasterCalcNode::Type::tMatrix ).isEmpty() )
return processCalculationGPU( std::move( calcNode ), feedback );
#endif
//open output dataset for writing
GDALDriverH outputDriver = openOutputDriver();
if ( !outputDriver )
{
mLastError = QObject::tr( "Could not obtain driver for %1" ).arg( mOutputFormat );
return CreateOutputError;
}
gdal::dataset_unique_ptr outputDataset( openOutputFile( outputDriver ) );
if ( !outputDataset )
{
mLastError = QObject::tr( "Could not create output %1" ).arg( mOutputFile );
return CreateOutputError;
}
GDALSetProjection( outputDataset.get(), mOutputCrs.toWkt().toLocal8Bit().data() );
GDALRasterBandH outputRasterBand = GDALGetRasterBand( outputDataset.get(), 1 );
float outputNodataValue = -FLT_MAX;
GDALSetRasterNoDataValue( outputRasterBand, outputNodataValue );
// Check if we need to read the raster as a whole (which is memory inefficient
// and not interruptable by the user) by checking if any raster matrix nodes are
// in the expression
bool requiresMatrix = ! calcNode->findNodes( QgsRasterCalcNode::Type::tMatrix ).isEmpty();
// Take the fast route (process one line at a time) if we can
if ( ! requiresMatrix )
{
// Map of raster names -> blocks
std::map<QString, std::unique_ptr<QgsRasterBlock>> inputBlocks;
std::map<QString, QgsRasterCalculatorEntry> uniqueRasterEntries;
for ( const auto &r : calcNode->findNodes( QgsRasterCalcNode::Type::tRasterRef ) )
{
QString layerRef( r->toString().remove( 0, 1 ) );
layerRef.chop( 1 );
if ( ! inputBlocks.count( layerRef ) )
{
for ( const auto &ref : mRasterEntries )
{
if ( ref.ref == layerRef )
{
uniqueRasterEntries[layerRef] = ref;
inputBlocks[layerRef ] = qgis::make_unique<QgsRasterBlock>();
}
}
}
}
//read / write line by line
QMap<QString, QgsRasterBlock * > _rasterData;
// Cast to float
std::vector<float> castedResult;
castedResult.reserve( static_cast<size_t>( mNumOutputColumns ) );
auto rowHeight = mOutputRectangle.height() / mNumOutputRows;
for ( size_t row = 0; row < static_cast<size_t>( mNumOutputRows ); ++row )
{
if ( feedback )
{
feedback->setProgress( 100.0 * static_cast< double >( row ) / mNumOutputRows );
}
if ( feedback && feedback->isCanceled() )
{
break;
}
// Calculates the rect for a single row read
QgsRectangle rect( mOutputRectangle );
rect.setYMaximum( rect.yMaximum() - rowHeight * row );
rect.setYMinimum( rect.yMaximum() - rowHeight );
// Read rows into input blocks
for ( auto &layerRef : inputBlocks )
{
QgsRasterCalculatorEntry ref = uniqueRasterEntries[layerRef.first];
if ( uniqueRasterEntries[layerRef.first].raster->crs() != mOutputCrs )
{
QgsRasterProjector proj;
proj.setCrs( ref.raster->crs(), mOutputCrs );
proj.setInput( ref.raster->dataProvider() );
proj.setPrecision( QgsRasterProjector::Exact );
layerRef.second.reset( proj.block( ref.bandNumber, rect, mNumOutputColumns, 1 ) );
}
else
{
inputBlocks[layerRef.first].reset( ref.raster->dataProvider()->block( ref.bandNumber, rect, mNumOutputColumns, 1 ) );
}
}
QgsRasterMatrix resultMatrix;
resultMatrix.setNodataValue( outputNodataValue );
_rasterData.clear();
for ( const auto &layerRef : inputBlocks )
{
_rasterData.insert( layerRef.first, inputBlocks[layerRef.first].get() );
}
if ( calcNode->calculate( _rasterData, resultMatrix, 0 ) )
{
// write scanline to the dataset
for ( size_t i = 0; i < static_cast<size_t>( mNumOutputColumns ); i++ )
{
castedResult[i] = static_cast<float>( resultMatrix.data()[i] );
}
if ( GDALRasterIO( outputRasterBand, GF_Write, 0, row, mNumOutputColumns, 1, castedResult.data(), mNumOutputColumns, 1, GDT_Float32, 0, 0 ) != CE_None )
{
QgsDebugMsg( QStringLiteral( "RasterIO error!" ) );
}
}
}
if ( feedback )
{
feedback->setProgress( 100.0 );
}
}
else // Original code (memory inefficient route)
{
QMap< QString, QgsRasterBlock * > inputBlocks;
QVector<QgsRasterCalculatorEntry>::const_iterator it = mRasterEntries.constBegin();
for ( ; it != mRasterEntries.constEnd(); ++it )
{
std::unique_ptr< QgsRasterBlock > block;
// if crs transform needed
if ( it->raster->crs() != mOutputCrs )
{
QgsRasterProjector proj;
proj.setCrs( it->raster->crs(), mOutputCrs );
proj.setInput( it->raster->dataProvider() );
proj.setPrecision( QgsRasterProjector::Exact );
QgsRasterBlockFeedback *rasterBlockFeedback = new QgsRasterBlockFeedback();
QObject::connect( feedback, &QgsFeedback::canceled, rasterBlockFeedback, &QgsRasterBlockFeedback::cancel );
block.reset( proj.block( it->bandNumber, mOutputRectangle, mNumOutputColumns, mNumOutputRows, rasterBlockFeedback ) );
if ( rasterBlockFeedback->isCanceled() )
{
qDeleteAll( inputBlocks );
return Canceled;
}
}
else
{
block.reset( it->raster->dataProvider()->block( it->bandNumber, mOutputRectangle, mNumOutputColumns, mNumOutputRows ) );
}
if ( block->isEmpty() )
{
mLastError = QObject::tr( "Could not allocate required memory for %1" ).arg( it->ref );
qDeleteAll( inputBlocks );
return MemoryError;
}
inputBlocks.insert( it->ref, block.release() );
}
QgsRasterMatrix resultMatrix;
resultMatrix.setNodataValue( outputNodataValue );
//read / write line by line
for ( int i = 0; i < mNumOutputRows; ++i )
{
if ( feedback )
{
feedback->setProgress( 100.0 * static_cast< double >( i ) / mNumOutputRows );
}
if ( feedback && feedback->isCanceled() )
{
break;
}
if ( calcNode->calculate( inputBlocks, resultMatrix, i ) )
{
bool resultIsNumber = resultMatrix.isNumber();
float *calcData = new float[mNumOutputColumns];
for ( int j = 0; j < mNumOutputColumns; ++j )
{
calcData[j] = ( float )( resultIsNumber ? resultMatrix.number() : resultMatrix.data()[j] );
}
//write scanline to the dataset
if ( GDALRasterIO( outputRasterBand, GF_Write, 0, i, mNumOutputColumns, 1, calcData, mNumOutputColumns, 1, GDT_Float32, 0, 0 ) != CE_None )
{
QgsDebugMsg( QStringLiteral( "RasterIO error!" ) );
}
delete[] calcData;
}
}
if ( feedback )
{
feedback->setProgress( 100.0 );
}
//close datasets and release memory
calcNode.reset();
qDeleteAll( inputBlocks );
inputBlocks.clear();
}
if ( feedback && feedback->isCanceled() )
{
//delete the dataset without closing (because it is faster)
gdal::fast_delete_and_close( outputDataset, outputDriver, mOutputFile );
return Canceled;
}
return Success;
}
QgsRasterCalculator::Result QgsRasterCalculator::processCalculationGPU( std::unique_ptr< QgsRasterCalcNode > calcNode, QgsFeedback *feedback )
{
QString cExpression( calcNode->toString( true ) );
QList<const QgsRasterCalcNode *> nodeList( calcNode->findNodes( QgsRasterCalcNode::Type::tRasterRef ) );
QSet<QString> capturedTexts;
for ( const auto &r : qgis::as_const( nodeList ) )
{
QString s( r->toString().remove( 0, 1 ) );
s.chop( 1 );
capturedTexts.insert( s );
}
// Extract all references
struct LayerRef
{
QString name;
int band;
QgsRasterLayer *layer = nullptr;
QString varName;
QString typeName;
size_t index;
size_t bufferSize;
size_t dataSize;
};
// Collects all layers, band, name, varName and size information
std::vector<LayerRef> inputRefs;
size_t refCounter = 0;
for ( const auto &r : capturedTexts )
{
if ( r.startsWith( '"' ) )
continue;
QStringList parts( r.split( '@' ) );
if ( parts.count() != 2 )
continue;
bool ok = false;
LayerRef entry;
entry.name = r;
entry.band = parts[1].toInt( &ok );
for ( const auto &ref : mRasterEntries )
{
if ( ref.ref == entry.name )
entry.layer = ref.raster;
}
if ( !( entry.layer && entry.layer->dataProvider() && ok ) )
continue;
entry.dataSize = entry.layer->dataProvider()->dataTypeSize( entry.band );
switch ( entry.layer->dataProvider()->dataType( entry.band ) )
{
case Qgis::DataType::Byte:
entry.typeName = QStringLiteral( "unsigned char" );
break;
case Qgis::DataType::UInt16:
entry.typeName = QStringLiteral( "unsigned int" );
break;
case Qgis::DataType::Int16:
entry.typeName = QStringLiteral( "short" );
break;
case Qgis::DataType::UInt32:
entry.typeName = QStringLiteral( "unsigned int" );
break;
case Qgis::DataType::Int32:
entry.typeName = QStringLiteral( "int" );
break;
case Qgis::DataType::Float32:
entry.typeName = QStringLiteral( "float" );
break;
// FIXME: not sure all OpenCL implementations support double
// maybe safer to fall back to the CPU implementation
// after a compatibility check
case Qgis::DataType::Float64:
entry.typeName = QStringLiteral( "double" );
break;
default:
return BandError;
}
entry.bufferSize = entry.dataSize * mNumOutputColumns;
entry.index = refCounter;
entry.varName = QStringLiteral( "input_raster_%1_band_%2" )
.arg( refCounter++ )
.arg( entry.band );
inputRefs.push_back( entry );
}
// Prepare context and queue
cl::Context ctx( QgsOpenClUtils::context() );
cl::CommandQueue queue( QgsOpenClUtils::commandQueue() );
// Create the C expression
std::vector<cl::Buffer> inputBuffers;
inputBuffers.reserve( inputRefs.size() );
QStringList inputArgs;
for ( const auto &ref : inputRefs )
{
cExpression.replace( QStringLiteral( "\"%1\"" ).arg( ref.name ), QStringLiteral( "%1[i]" ).arg( ref.varName ) );
inputArgs.append( QStringLiteral( "__global %1 *%2" )
.arg( ref.typeName )
.arg( ref.varName ) );
inputBuffers.push_back( cl::Buffer( ctx, CL_MEM_READ_ONLY, ref.bufferSize, nullptr, nullptr ) );
}
//qDebug() << cExpression;
// Create the program
QString programTemplate( R"CL(
// Inputs:
##INPUT_DESC##
// Expression: ##EXPRESSION_ORIGINAL##
__kernel void rasterCalculator( ##INPUT##
__global float *resultLine
)
{
// Get the index of the current element
const int i = get_global_id(0);
// Expression
resultLine[i] = ##EXPRESSION##;
}
)CL" );
QStringList inputDesc;
for ( const auto &ref : inputRefs )
{
inputDesc.append( QStringLiteral( " // %1 = %2" ).arg( ref.varName ).arg( ref.name ) );
}
programTemplate = programTemplate.replace( QStringLiteral( "##INPUT_DESC##" ), inputDesc.join( '\n' ) );
programTemplate = programTemplate.replace( QStringLiteral( "##INPUT##" ), inputArgs.length() ? ( inputArgs.join( ',' ).append( ',' ) ) : QChar( ' ' ) );
programTemplate = programTemplate.replace( QStringLiteral( "##EXPRESSION##" ), cExpression );
programTemplate = programTemplate.replace( QStringLiteral( "##EXPRESSION_ORIGINAL##" ), calcNode->toString( ) );
// qDebug() << programTemplate;
// Create a program from the kernel source
cl::Program program( QgsOpenClUtils::buildProgram( programTemplate, QgsOpenClUtils::ExceptionBehavior::Throw ) );
// Create the buffers, output is float32 (4 bytes)
// We assume size of float = 4 because that's the size used by OpenCL and IEEE 754
Q_ASSERT( sizeof( float ) == 4 );
std::size_t resultBufferSize( 4 * static_cast<size_t>( mNumOutputColumns ) );
cl::Buffer resultLineBuffer( ctx, CL_MEM_WRITE_ONLY,
resultBufferSize, nullptr, nullptr );
auto kernel = cl::Kernel( program, "rasterCalculator" );
for ( unsigned int i = 0; i < inputBuffers.size() ; i++ )
{
kernel.setArg( i, inputBuffers.at( i ) );
}
kernel.setArg( static_cast<unsigned int>( inputBuffers.size() ), resultLineBuffer );
QgsOpenClUtils::CPLAllocator<float> resultLine( static_cast<size_t>( mNumOutputColumns ) );
//open output dataset for writing
GDALDriverH outputDriver = openOutputDriver();
if ( !outputDriver )
{
mLastError = QObject::tr( "Could not obtain driver for %1" ).arg( mOutputFormat );
return CreateOutputError;
}
gdal::dataset_unique_ptr outputDataset( openOutputFile( outputDriver ) );
if ( !outputDataset )
{
mLastError = QObject::tr( "Could not create output %1" ).arg( mOutputFile );
return CreateOutputError;
}
GDALSetProjection( outputDataset.get(), mOutputCrs.toWkt().toLocal8Bit().data() );
GDALRasterBandH outputRasterBand = GDALGetRasterBand( outputDataset.get(), 1 );
if ( !outputRasterBand )
return BandError;
// Input block (buffer)
std::unique_ptr<QgsRasterBlock> block;
// Run kernel on all scanlines
auto rowHeight = mOutputRectangle.height() / mNumOutputRows;
for ( int line = 0; line < mNumOutputRows; line++ )
{
if ( feedback && feedback->isCanceled() )
{
break;
}
if ( feedback )
{
feedback->setProgress( 100.0 * static_cast< double >( line ) / mNumOutputRows );
}
// Read lines from rasters into the buffers
for ( const auto &ref : inputRefs )
{
// Read one row
QgsRectangle rect( mOutputRectangle );
rect.setYMaximum( rect.yMaximum() - rowHeight * line );
rect.setYMinimum( rect.yMaximum() - rowHeight );
// TODO: check if this is too slow
// if crs transform needed
if ( ref.layer->crs() != mOutputCrs )
{
QgsRasterProjector proj;
proj.setCrs( ref.layer->crs(), mOutputCrs );
proj.setInput( ref.layer->dataProvider() );
proj.setPrecision( QgsRasterProjector::Exact );
block.reset( proj.block( ref.band, rect, mNumOutputColumns, 1 ) );
}
else
{
block.reset( ref.layer->dataProvider()->block( ref.band, rect, mNumOutputColumns, 1 ) );
}
//for ( int i = 0; i < mNumOutputColumns; i++ )
// qDebug() << "Input: " << line << i << ref.varName << " = " << block->value( 0, i );
//qDebug() << "Writing buffer " << ref.index;
Q_ASSERT( ref.bufferSize == static_cast<size_t>( block->data().size( ) ) );
queue.enqueueWriteBuffer( inputBuffers[ref.index], CL_TRUE, 0,
ref.bufferSize, block->bits() );
}
// Run the kernel
queue.enqueueNDRangeKernel(
kernel,
0,
cl::NDRange( mNumOutputColumns )
);
// Write the result
queue.enqueueReadBuffer( resultLineBuffer, CL_TRUE, 0,
resultBufferSize, resultLine.get() );
//for ( int i = 0; i < mNumOutputColumns; i++ )
// qDebug() << "Output: " << line << i << " = " << resultLine[i];
if ( GDALRasterIO( outputRasterBand, GF_Write, 0, line, mNumOutputColumns, 1, resultLine.get(), mNumOutputColumns, 1, GDT_Float32, 0, 0 ) != CE_None )
{
return CreateOutputError;
}
}
if ( feedback && feedback->isCanceled() )
{
//delete the dataset without closing (because it is faster)
gdal::fast_delete_and_close( outputDataset, outputDriver, mOutputFile );
return Canceled;
}
inputBuffers.clear();
return Success;
}
QgsRasterFileWriter::WriterError QgsRasterFileWriter::writeDataRaster( const QgsRasterPipe* pipe, QgsRasterIterator* iter, int nCols, int nRows, const QgsRectangle& outputExtent,
const QgsCoordinateReferenceSystem& crs, QProgressDialog* progressDialog )
{
QgsDebugMsg( "Entered" );
if ( !iter )
{
return SourceProviderError;
}
const QgsRasterInterface* iface = pipe->last();
if ( !iface )
{
return SourceProviderError;
}
QgsRasterDataProvider* srcProvider = const_cast<QgsRasterDataProvider*>( dynamic_cast<const QgsRasterDataProvider*>( iface->srcInput() ) );
if ( !srcProvider )
{
QgsDebugMsg( "Cannot get source data provider" );
return SourceProviderError;
}
iter->setMaximumTileWidth( mMaxTileWidth );
iter->setMaximumTileHeight( mMaxTileHeight );
int nBands = iface->bandCount();
if ( nBands < 1 )
{
return SourceProviderError;
}
//check if all the bands have the same data type size, otherwise we cannot write it to the provider
//(at least not with the current interface)
int dataTypeSize = QgsRasterBlock::typeSize( srcProvider->srcDataType( 1 ) );
for ( int i = 2; i <= nBands; ++i )
{
if ( QgsRasterBlock::typeSize( srcProvider->srcDataType( 1 ) ) != dataTypeSize )
{
return DestProviderError;
}
}
// Output data type - source data type is preferred but it may happen that we need
// to set 'no data' value (which was not set on source data) if output extent
// is larger than source extent (with or without reprojection) and there is no 'free'
// (not used) value available
QList<bool> destHasNoDataValueList;
QList<double> destNoDataValueList;
QList<QGis::DataType> destDataTypeList;
for ( int bandNo = 1; bandNo <= nBands; bandNo++ )
{
QgsRasterNuller *nuller = pipe->nuller();
bool srcHasNoDataValue = srcProvider->srcHasNoDataValue( bandNo );
bool destHasNoDataValue = false;
double destNoDataValue = std::numeric_limits<double>::quiet_NaN();
QGis::DataType destDataType = srcProvider->srcDataType( bandNo );
// TODO: verify what happens/should happen if srcNoDataValue is disabled by setUseSrcNoDataValue
QgsDebugMsg( QString( "srcHasNoDataValue = %1 srcNoDataValue = %2" ).arg( srcHasNoDataValue ).arg( srcProvider->srcNoDataValue( bandNo ) ) );
if ( srcHasNoDataValue )
{
// If source has no data value, it is used by provider
destNoDataValue = srcProvider->srcNoDataValue( bandNo );
destHasNoDataValue = true;
}
else if ( nuller && nuller->noData( bandNo ).size() > 0 )
{
// Use one user defined no data value
destNoDataValue = nuller->noData( bandNo ).value( 0 ).min();
destHasNoDataValue = true;
}
else
{
// Verify if we realy need no data value, i.e.
QgsRectangle srcExtent = outputExtent;
QgsRasterProjector *projector = pipe->projector();
if ( projector && projector->destCrs() != projector->srcCrs() )
{
QgsCoordinateTransform ct( projector->destCrs(), projector->srcCrs() );
srcExtent = ct.transformBoundingBox( outputExtent );
}
if ( !srcProvider->extent().contains( srcExtent ) )
{
// Destination extent is larger than source extent, we need destination no data values
// Get src sample statistics (estimation from sample)
QgsRasterBandStats stats = srcProvider->bandStatistics( bandNo, QgsRasterBandStats::Min | QgsRasterBandStats::Max, srcExtent, 250000 );
// Test if we have free (not used) values
double typeMinValue = QgsContrastEnhancement::maximumValuePossible(( QGis::DataType )srcProvider->srcDataType( bandNo ) );
double typeMaxValue = QgsContrastEnhancement::maximumValuePossible(( QGis::DataType )srcProvider->srcDataType( bandNo ) );
if ( stats.minimumValue > typeMinValue )
{
destNoDataValue = typeMinValue;
}
else if ( stats.maximumValue < typeMaxValue )
{
destNoDataValue = typeMaxValue;
}
else
{
// We have to use wider type
destDataType = QgsRasterBlock::typeWithNoDataValue( destDataType, &destNoDataValue );
}
destHasNoDataValue = true;
}
}
if ( nuller && destHasNoDataValue )
{
nuller->setOutputNoDataValue( bandNo, destNoDataValue );
}
QgsDebugMsg( QString( "bandNo = %1 destDataType = %2 destHasNoDataValue = %3 destNoDataValue = %4" ).arg( bandNo ).arg( destDataType ).arg( destHasNoDataValue ).arg( destNoDataValue ) );
destDataTypeList.append( destDataType );
destHasNoDataValueList.append( destHasNoDataValue );
destNoDataValueList.append( destNoDataValue );
}
QGis::DataType destDataType = destDataTypeList.value( 0 );
// Currently write API supports one output type for dataset only -> find the widest
for ( int i = 1; i < nBands; i++ )
{
if ( destDataTypeList.value( i ) > destDataType )
{
destDataType = destDataTypeList.value( i );
// no data value may be left per band (for future)
}
}
//create destProvider for whole dataset here
QgsRasterDataProvider* destProvider = 0;
double pixelSize;
double geoTransform[6];
globalOutputParameters( outputExtent, nCols, nRows, geoTransform, pixelSize );
// initOutput() returns 0 in tile mode!
destProvider = initOutput( nCols, nRows, crs, geoTransform, nBands, destDataType, destHasNoDataValueList, destNoDataValueList );
WriterError error = writeDataRaster( pipe, iter, nCols, nRows, outputExtent, crs, destDataType, destHasNoDataValueList, destNoDataValueList, destProvider, progressDialog );
if ( error == NoDataConflict )
{
// The value used for no data was found in source data, we must use wider data type
if ( destProvider ) // no tiles
{
destProvider->remove();
delete destProvider;
destProvider = 0;
}
else // VRT
{
// TODO: remove created VRT
}
// But we don't know which band -> wider all
for ( int i = 0; i < nBands; i++ )
{
double destNoDataValue;
QGis::DataType destDataType = QgsRasterBlock::typeWithNoDataValue( destDataTypeList.value( i ), &destNoDataValue );
destDataTypeList.replace( i, destDataType );
destNoDataValueList.replace( i, destNoDataValue );
}
destDataType = destDataTypeList.value( 0 );
// Try again
destProvider = initOutput( nCols, nRows, crs, geoTransform, nBands, destDataType, destHasNoDataValueList, destNoDataValueList );
error = writeDataRaster( pipe, iter, nCols, nRows, outputExtent, crs, destDataType, destHasNoDataValueList, destNoDataValueList, destProvider, progressDialog );
}
if ( destProvider )
delete destProvider;
return error;
}
