// Called by push devices (e.g. ANT+)
void RealtimeWindow::updateData(RealtimeData &rtData)
{
displayPower = rtData.getWatts();
displayCadence = rtData.getCadence();
displayHeartRate = rtData.getHr();
displaySpeed = rtData.getSpeed();
displayLoad = rtData.getLoad();
// Gradient not supported
return;
}
void RealtimeWindow::guiUpdate() // refreshes the telemetry
{
RealtimeData rtData;
// get latest telemetry from device (if it is a pull device e.g. Computrainer //
if (status&RT_RUNNING && deviceController->doesPull() == true) {
deviceController->getRealtimeData(rtData);
displayPower = rtData.getWatts();
displayCadence = rtData.getCadence();
displayHeartRate = rtData.getHr();
displaySpeed = rtData.getSpeed();
displayLoad = rtData.getLoad();
}
// Distance assumes current speed for the last second. from km/h to km/sec
displayDistance += displaySpeed / (5 * 3600); // XXX assumes 200ms refreshrate
displayWorkoutDistance += displaySpeed / (5 * 3600); // XXX assumes 200ms refreshrate
total_msecs = session_elapsed_msec + session_time.elapsed();
lap_msecs = lap_elapsed_msec + lap_time.elapsed();
// update those LCDs!
timeLCD->display(QString("%1:%2:%3.%4").arg(total_msecs/3600000)
.arg((total_msecs%3600000)/60000,2,10,QLatin1Char('0'))
.arg((total_msecs%60000)/1000,2,10,QLatin1Char('0'))
.arg((total_msecs%1000)/100));
laptimeLCD->display(QString("%1:%2:%3.%4").arg(lap_msecs/3600000,2)
.arg((lap_msecs%3600000)/60000,2,10,QLatin1Char('0'))
.arg((lap_msecs%60000)/1000,2,10,QLatin1Char('0'))
.arg((lap_msecs%1000)/100));
// Cadence, HR and Power needs to be rounded to 0 decimal places
powerLCD->display(round(displayPower));
double val = round(displaySpeed * (useMetricUnits ? 1.0 : MILES_PER_KM) * 10.00)/10.00;
speedLCD->display(QString::number(val, 'f', 1)); // always show 1 decimal point
cadenceLCD->display(round(displayCadence));
heartrateLCD->display(round(displayHeartRate));
lapLCD->display(displayWorkoutLap+displayLap);
// load or gradient depending on mode we are running
if (status&RT_MODE_ERGO)
loadLCD->display(displayLoad);
else
{
val = round(displayGradient*10)/10.00;
loadLCD->display(QString::number(val, 'f', 1)); // always show 1 decimal point
}
// distance
val = round(displayDistance*(useMetricUnits ? 1.0 : MILES_PER_KM) *10.00) /10.00;
distanceLCD->display(QString::number(val, 'f', 1)); // always show 1 decimal point
// NZ Averages.....
if (displayPower) { //NZAP is bogus - make it configurable!!!
pwrcount++; if (pwrcount ==1) avgPower = displayPower;
avgPower = ((avgPower * (double)pwrcount) + displayPower) /(double) (pwrcount+1);
}
if (displayCadence) {
cadcount++; if (cadcount ==1) avgCadence = displayCadence;
avgCadence = ((avgCadence * (double)cadcount) + displayCadence) /(double) (cadcount+1);
}
if (displayHeartRate) {
hrcount++; if (hrcount ==1) avgHeartRate = displayHeartRate;
avgHeartRate = ((avgHeartRate * (double)hrcount) + displayHeartRate) /(double) (hrcount+1);
}
if (displaySpeed) {
spdcount++; if (spdcount ==1) avgSpeed = displaySpeed;
avgSpeed = ((avgSpeed * (double)spdcount) + displaySpeed) /(double) (spdcount+1);
}
if (displayLoad && status&RT_MODE_ERGO) {
lodcount++; if (lodcount ==1) avgLoad = displayLoad;
avgLoad = ((avgLoad * (double)lodcount) + displayLoad) /(double) (lodcount+1);
avgloadLCD->display((int)avgLoad);
}
if (status&RT_MODE_SPIN) {
grdcount++; if (grdcount ==1) avgGradient = displayGradient;
avgGradient = ((avgGradient * (double)grdcount) + displayGradient) /(double) (grdcount+1);
avgloadLCD->display((int)avgGradient);
}
avgpowerLCD->display((int)avgPower);
val = round(avgSpeed * (useMetricUnits ? 1.0 : MILES_PER_KM) * 10.00)/10.00;
avgspeedLCD->display(QString::number(val, 'f', 1)); // always show 1 decimal point
avgcadenceLCD->display((int)avgCadence);
avgheartrateLCD->display((int)avgHeartRate);
// now that plot....
rtPlot->pwrData.addData(displayPower); // add new data point
rtPlot->cadData.addData(displayCadence); // add new data point
rtPlot->spdData.addData(displaySpeed); // add new data point
rtPlot->hrData.addData(displayHeartRate); // add new data point
//rtPlot->lodData.addData(displayLoad); // add new Load point
rtPlot->replot(); // redraw
this->update();
}
void
RealtimeController::processRealtimeData(RealtimeData &rtData)
{
if (!dc) return; // no config
// setup the algorithm or lookup tables
// for the device postprocessing type
switch(dc->postProcess) {
case 0 : // nothing!
break;
case 1 : // Kurt Kinetic - Cyclone
{
double mph = rtData.getSpeed() * MILES_PER_KM;
// using the algorithm from http://www.kurtkinetic.com/powercurve.php
rtData.setWatts((6.481090) * mph + (0.020106) * (mph*mph*mph));
}
break;
case 2 : // Kurt Kinetic - Road Machine
{
double mph = rtData.getSpeed() * MILES_PER_KM;
// using the algorithm from http://www.kurtkinetic.com/powercurve.php
rtData.setWatts((5.244820) * mph + (0.019168) * (mph*mph*mph));
}
break;
case 3 : // Cyclops Fluid 2
{
double mph = rtData.getSpeed() * MILES_PER_KM;
// using the algorithm from:
// http://thebikegeek.blogspot.com/2009/12/while-we-wait-for-better-and-better.html
rtData.setWatts((0.0115*(mph*mph*mph)) - ((0.0137)*(mph*mph)) + ((8.9788)*(mph)));
}
break;
case 4 : // BT-ATS - BT Advanced Training System
{
// v is expressed in revs/second
double v = rtData.getWheelRpm()/60.0;
// using the algorithm from Steven Sansonetti of BT:
// This is a 3rd order polynomial, where P = av3 + bv2 + cv + d
// where:
double a = 2.90390167E-01; // ( 0.290390167)
double b = - 4.61311774E-02; // ( -0.0461311774)
double c = 5.92125507E-01; // (0.592125507)
double d = 0.0;
rtData.setWatts(a*v*v*v + b*v*v +c*v + d);
}
break;
case 5 : // Lemond Revolution
{
double V = rtData.getSpeed() * 0.277777778;
// Tom Anhalt spent a lot of time working this all out
// for the data / analysis see: http://wattagetraining.com/forum/viewtopic.php?f=2&t=335
rtData.setWatts((0.21*pow(V,3))+(4.25*V));
}
break;
case 6 : // 1UP USA
{
double V = rtData.getSpeed() * MILES_PER_KM;
// Power curve provided by extraction from SportsTracks plugin
rtData.setWatts(25.00 + (2.65f*V) - (0.42f*pow(V,2)) + (0.058f*pow(V,3)));
}
break;
// MINOURA - Has many gears
case 7 : //MINOURA V100 on H
{
double V = rtData.getSpeed();
// 7 = V100 on H: y = -0.0036x^3 + 0.2815x^2 + 3.4978x - 9.7857
rtData.setWatts(pow(-0.0036*V, 3) + pow(0.2815*V,2) + (3.4978*V) - 9.7857);
}
break;
case 8 : //MINOURA V100 on 5
{
double V = rtData.getSpeed();
// 8 = V100 on 5: y = -0.0023x^3 + 0.2067x^2 + 3.8906x - 11.214
rtData.setWatts(pow(-0.0023*V, 3) + pow(0.2067*V,2) + (3.8906*V) - 11.214);
}
break;
case 9 : //MINOURA V100 on 4
{
double V = rtData.getSpeed();
// 9 = V100 on 4: y = -0.00173x^3 + 0.1825x^2 + 3.4036x - 10
rtData.setWatts(pow(-0.00173*V, 3) + pow(0.1825*V,2) + (3.4036*V) - 10.00);
}
break;
case 10 : //MINOURA V100 on 3
{
double V = rtData.getSpeed();
// 10 = V100 on 3: y = -0.0011x^3 + 0.1433x^2 + 2.8808x - 8.1429
rtData.setWatts(pow(-0.0011*V, 3) + pow(0.1433*V,2) + (2.8808*V) - 8.1429);
}
break;
case 11 : //MINOURA V100 on 2
{
double V = rtData.getSpeed();
// 11 = V100 on 2: y = -0.0007x^3 + 0.1348x^2 + 1.581x - 3.3571
rtData.setWatts(pow(-0.0007*V, 3) + pow(0.1348*V,2) + (1.581*V) - 3.3571);
}
break;
case 12 : //MINOURA V100 on 1
{
double V = rtData.getSpeed();
// 12 = V100 on 1: y = 0.0004x^3 + 0.057x^2 + 1.7797x - 5.0714
rtData.setWatts(pow(0.0004*V, 3) + pow(0.057*V,2) + (1.7797*V) - 5.0714);
}
break;
case 13 : //MINOURA V100 on L
{
double V = rtData.getSpeed();
// 13 = V100 on L: y = 0.0557x^2 + 1.231x - 3.7143
rtData.setWatts(pow(0.0557*V, 2) + (1.231*V) - 3.7143);
}
break;
case 14 : //SARIS POWERBEAM PRO
{
double V = rtData.getSpeed();
// 14 = 0.0008x^3 + 0.145x^2 + 2.5299x + 14.641 where x = speed in kph
rtData.setWatts(pow(0.0008*V, 3) + pow(0.145*V, 2) + (2.5299*V) + 14.641);
}
break;
case 15 : // TACX SATORI SETTING 2
{
double V = rtData.getSpeed();
double slope = 5.33;
double intercept = -36.67;
rtData.setWatts((slope * V) + intercept);
}
break;
case 16 : // TACX SATORI SETTING 4
{
double V = rtData.getSpeed();
double slope = 8.27;
double intercept = -47.33;
rtData.setWatts((slope * V) + intercept);
}
break;
case 17 : // TACX SATORI SETTING 6
{
double V = rtData.getSpeed();
double slope = 11.400;
double intercept = -67.00;
rtData.setWatts((slope * V) + intercept);
}
break;
case 18 : // TACX SATORI SETTING 8
{
double V = rtData.getSpeed();
double slope = 14.40;
double intercept = -82.00;
rtData.setWatts((slope * V) + intercept);
}
break;
case 19 : // TACX SATORI SETTING 10
{
double V = rtData.getSpeed();
double slope = 17.73;
double intercept = -114.67;
rtData.setWatts((slope * V) + intercept);
}
break;
case 20 : // TACX FLOW SETTING 0
{
double V = rtData.getSpeed();
double slope = 7.75;
double intercept = -47.27;
rtData.setWatts((slope * V) + intercept);
}
break;
case 21 : // TACX FLOW SETTING 2
{
double V = rtData.getSpeed();
double slope = 9.51;
double intercept = -66.69;
rtData.setWatts((slope * V) + intercept);
}
break;
case 22 : // TACX FLOW SETTING 4
{
double V = rtData.getSpeed();
double slope = 11.03;
double intercept = -71.59;
rtData.setWatts((slope * V) + intercept);
}
break;
case 23 : // TACX FLOW SETTING 6
{
double V = rtData.getSpeed();
double slope = 12.81;
double intercept = -95.05;
rtData.setWatts((slope * V) + intercept);
}
break;
case 24 : // TACX FLOW SETTING 8
{
double V = rtData.getSpeed();
double slope = 14.37;
double intercept = -102.43;
rtData.setWatts((slope * V) + intercept);
}
break;
default : // unknown - do nothing
break;
}
}
