// Only reflow the selected child ...
void
nsMathMLSelectedFrame::Reflow(nsPresContext* aPresContext,
ReflowOutput& aDesiredSize,
const ReflowInput& aReflowInput,
nsReflowStatus& aStatus)
{
MarkInReflow();
mPresentationData.flags &= ~NS_MATHML_ERROR;
aStatus.Reset();
aDesiredSize.ClearSize();
aDesiredSize.SetBlockStartAscent(0);
mBoundingMetrics = nsBoundingMetrics();
nsIFrame* childFrame = GetSelectedFrame();
if (childFrame) {
WritingMode wm = childFrame->GetWritingMode();
LogicalSize availSize = aReflowInput.ComputedSize(wm);
availSize.BSize(wm) = NS_UNCONSTRAINEDSIZE;
ReflowInput childReflowInput(aPresContext, aReflowInput,
childFrame, availSize);
ReflowChild(childFrame, aPresContext, aDesiredSize,
childReflowInput, aStatus);
SaveReflowAndBoundingMetricsFor(childFrame, aDesiredSize,
aDesiredSize.mBoundingMetrics);
mBoundingMetrics = aDesiredSize.mBoundingMetrics;
}
FinalizeReflow(aReflowInput.mRenderingContext->GetDrawTarget(), aDesiredSize);
NS_FRAME_SET_TRUNCATION(aStatus, aReflowInput, aDesiredSize);
}
void
nsProgressFrame::Reflow(nsPresContext* aPresContext,
ReflowOutput& aDesiredSize,
const ReflowInput& aReflowInput,
nsReflowStatus& aStatus)
{
MarkInReflow();
DO_GLOBAL_REFLOW_COUNT("nsProgressFrame");
DISPLAY_REFLOW(aPresContext, this, aReflowInput, aDesiredSize, aStatus);
NS_ASSERTION(mBarDiv, "Progress bar div must exist!");
NS_ASSERTION(!GetPrevContinuation(),
"nsProgressFrame should not have continuations; if it does we "
"need to call RegUnregAccessKey only for the first.");
if (mState & NS_FRAME_FIRST_REFLOW) {
nsFormControlFrame::RegUnRegAccessKey(this, true);
}
nsIFrame* barFrame = mBarDiv->GetPrimaryFrame();
NS_ASSERTION(barFrame, "The progress frame should have a child with a frame!");
ReflowBarFrame(barFrame, aPresContext, aReflowInput, aStatus);
aDesiredSize.SetSize(aReflowInput.GetWritingMode(),
aReflowInput.ComputedSizeWithBorderPadding());
aDesiredSize.SetOverflowAreasToDesiredBounds();
ConsiderChildOverflow(aDesiredSize.mOverflowAreas, barFrame);
FinishAndStoreOverflow(&aDesiredSize);
aStatus = NS_FRAME_COMPLETE;
NS_FRAME_SET_TRUNCATION(aStatus, aReflowInput, aDesiredSize);
}
// Only place the selected child ...
/* virtual */ nsresult
nsMathMLSelectedFrame::Place(DrawTarget* aDrawTarget,
bool aPlaceOrigin,
ReflowOutput& aDesiredSize)
{
nsIFrame* childFrame = GetSelectedFrame();
if (mInvalidMarkup) {
return ReflowError(aDrawTarget, aDesiredSize);
}
aDesiredSize.ClearSize();
aDesiredSize.SetBlockStartAscent(0);
mBoundingMetrics = nsBoundingMetrics();
if (childFrame) {
GetReflowAndBoundingMetricsFor(childFrame, aDesiredSize, mBoundingMetrics);
if (aPlaceOrigin) {
FinishReflowChild(childFrame, PresContext(), aDesiredSize, nullptr, 0, 0, 0);
}
mReference.x = 0;
mReference.y = aDesiredSize.BlockStartAscent();
}
aDesiredSize.mBoundingMetrics = mBoundingMetrics;
return NS_OK;
}
void
nsSVGForeignObjectFrame::Reflow(nsPresContext* aPresContext,
ReflowOutput& aDesiredSize,
const ReflowInput& aReflowInput,
nsReflowStatus& aStatus)
{
MOZ_ASSERT(!(GetStateBits() & NS_FRAME_IS_NONDISPLAY),
"Should not have been called");
// Only InvalidateAndScheduleBoundsUpdate marks us with NS_FRAME_IS_DIRTY,
// so if that bit is still set we still have a resize pending. If we hit
// this assertion, then we should get the presShell to skip reflow roots
// that have a dirty parent since a reflow is going to come via the
// reflow root's parent anyway.
NS_ASSERTION(!(GetStateBits() & NS_FRAME_IS_DIRTY),
"Reflowing while a resize is pending is wasteful");
// ReflowSVG makes sure mRect is up to date before we're called.
NS_ASSERTION(!aReflowInput.mParentReflowInput,
"should only get reflow from being reflow root");
NS_ASSERTION(aReflowInput.ComputedWidth() == GetSize().width &&
aReflowInput.ComputedHeight() == GetSize().height,
"reflow roots should be reflowed at existing size and "
"svg.css should ensure we have no padding/border/margin");
DoReflow();
WritingMode wm = aReflowInput.GetWritingMode();
LogicalSize finalSize(wm, aReflowInput.ComputedISize(),
aReflowInput.ComputedBSize());
aDesiredSize.SetSize(wm, finalSize);
aDesiredSize.SetOverflowAreasToDesiredBounds();
aStatus = NS_FRAME_COMPLETE;
}
static
void DebugCheckChildSize(nsIFrame* aChild,
ReflowOutput& aMet)
{
WritingMode wm = aMet.GetWritingMode();
if ((aMet.ISize(wm) < 0) || (aMet.ISize(wm) > PROBABLY_TOO_LARGE)) {
printf("WARNING: cell content %p has large inline size %d \n",
static_cast<void*>(aChild), int32_t(aMet.ISize(wm)));
}
}
void
nsTextControlFrame::Reflow(nsPresContext* aPresContext,
ReflowOutput& aDesiredSize,
const ReflowInput& aReflowInput,
nsReflowStatus& aStatus)
{
MarkInReflow();
DO_GLOBAL_REFLOW_COUNT("nsTextControlFrame");
DISPLAY_REFLOW(aPresContext, this, aReflowInput, aDesiredSize, aStatus);
// make sure that the form registers itself on the initial/first reflow
if (mState & NS_FRAME_FIRST_REFLOW) {
nsFormControlFrame::RegUnRegAccessKey(this, true);
}
// set values of reflow's out parameters
WritingMode wm = aReflowInput.GetWritingMode();
LogicalSize
finalSize(wm,
aReflowInput.ComputedISize() +
aReflowInput.ComputedLogicalBorderPadding().IStartEnd(wm),
aReflowInput.ComputedBSize() +
aReflowInput.ComputedLogicalBorderPadding().BStartEnd(wm));
aDesiredSize.SetSize(wm, finalSize);
// computation of the ascent wrt the input height
nscoord lineHeight = aReflowInput.ComputedBSize();
float inflation = nsLayoutUtils::FontSizeInflationFor(this);
if (!IsSingleLineTextControl()) {
lineHeight = ReflowInput::CalcLineHeight(GetContent(), StyleContext(),
NS_AUTOHEIGHT, inflation);
}
RefPtr<nsFontMetrics> fontMet =
nsLayoutUtils::GetFontMetricsForFrame(this, inflation);
// now adjust for our borders and padding
aDesiredSize.SetBlockStartAscent(
nsLayoutUtils::GetCenteredFontBaseline(fontMet, lineHeight,
wm.IsLineInverted()) +
aReflowInput.ComputedLogicalBorderPadding().BStart(wm));
// overflow handling
aDesiredSize.SetOverflowAreasToDesiredBounds();
// perform reflow on all kids
nsIFrame* kid = mFrames.FirstChild();
while (kid) {
ReflowTextControlChild(kid, aPresContext, aReflowInput, aStatus, aDesiredSize);
kid = kid->GetNextSibling();
}
// take into account css properties that affect overflow handling
FinishAndStoreOverflow(&aDesiredSize);
aStatus = NS_FRAME_COMPLETE;
NS_FRAME_SET_TRUNCATION(aStatus, aReflowInput, aDesiredSize);
}
void
nsMathMLmpaddedFrame::UpdateValue(int32_t aSign,
int32_t aPseudoUnit,
const nsCSSValue& aCSSValue,
const ReflowOutput& aDesiredSize,
nscoord& aValueToUpdate,
float aFontSizeInflation) const
{
nsCSSUnit unit = aCSSValue.GetUnit();
if (NS_MATHML_SIGN_INVALID != aSign && eCSSUnit_Null != unit) {
nscoord scaler = 0, amount = 0;
if (eCSSUnit_Percent == unit || eCSSUnit_Number == unit) {
switch(aPseudoUnit) {
case NS_MATHML_PSEUDO_UNIT_WIDTH:
scaler = aDesiredSize.Width();
break;
case NS_MATHML_PSEUDO_UNIT_HEIGHT:
scaler = aDesiredSize.BlockStartAscent();
break;
case NS_MATHML_PSEUDO_UNIT_DEPTH:
scaler = aDesiredSize.Height() - aDesiredSize.BlockStartAscent();
break;
default:
// if we ever reach here, it would mean something is wrong
// somewhere with the setup and/or the caller
NS_ERROR("Unexpected Pseudo Unit");
return;
}
}
if (eCSSUnit_Number == unit)
amount = NSToCoordRound(float(scaler) * aCSSValue.GetFloatValue());
else if (eCSSUnit_Percent == unit)
amount = NSToCoordRound(float(scaler) * aCSSValue.GetPercentValue());
else
amount = CalcLength(PresContext(), mStyleContext, aCSSValue,
aFontSizeInflation);
if (NS_MATHML_SIGN_PLUS == aSign)
aValueToUpdate += amount;
else if (NS_MATHML_SIGN_MINUS == aSign)
aValueToUpdate -= amount;
else
aValueToUpdate = amount;
}
}
void
nsSimplePageSequenceFrame::SetDesiredSize(ReflowOutput& aDesiredSize,
const ReflowInput& aReflowInput,
nscoord aWidth,
nscoord aHeight)
{
// Aim to fill the whole size of the document, not only so we
// can act as a background in print preview but also handle overflow
// in child page frames correctly.
// Use availableWidth so we don't cause a needless horizontal scrollbar.
aDesiredSize.Width() = std::max(aReflowInput.AvailableWidth(),
nscoord(aWidth * PresContext()->GetPrintPreviewScale()));
aDesiredSize.Height() = std::max(aReflowInput.ComputedHeight(),
nscoord(aHeight * PresContext()->GetPrintPreviewScale()));
}
/* virtual */ void
nsMathMLmrootFrame::GetIntrinsicISizeMetrics(nsRenderingContext* aRenderingContext, ReflowOutput& aDesiredSize)
{
nsIFrame* baseFrame = mFrames.FirstChild();
nsIFrame* indexFrame = nullptr;
if (baseFrame)
indexFrame = baseFrame->GetNextSibling();
if (!indexFrame || indexFrame->GetNextSibling()) {
ReflowError(aRenderingContext->GetDrawTarget(), aDesiredSize);
return;
}
float fontSizeInflation = nsLayoutUtils::FontSizeInflationFor(this);
nscoord baseWidth =
nsLayoutUtils::IntrinsicForContainer(aRenderingContext, baseFrame,
nsLayoutUtils::PREF_ISIZE);
nscoord indexWidth =
nsLayoutUtils::IntrinsicForContainer(aRenderingContext, indexFrame,
nsLayoutUtils::PREF_ISIZE);
nscoord sqrWidth = mSqrChar.GetMaxWidth(PresContext(),
aRenderingContext->GetDrawTarget(),
fontSizeInflation);
nscoord dxSqr;
RefPtr<nsFontMetrics> fm =
nsLayoutUtils::GetFontMetricsForFrame(this, fontSizeInflation);
GetRadicalXOffsets(indexWidth, sqrWidth, fm, nullptr, &dxSqr);
nscoord width = dxSqr + sqrWidth + baseWidth;
aDesiredSize.Width() = width;
aDesiredSize.mBoundingMetrics.width = width;
aDesiredSize.mBoundingMetrics.leftBearing = 0;
aDesiredSize.mBoundingMetrics.rightBearing = width;
}
void
nsTableColGroupFrame::Reflow(nsPresContext* aPresContext,
ReflowOutput& aDesiredSize,
const ReflowInput& aReflowInput,
nsReflowStatus& aStatus)
{
MarkInReflow();
DO_GLOBAL_REFLOW_COUNT("nsTableColGroupFrame");
DISPLAY_REFLOW(aPresContext, this, aReflowInput, aDesiredSize, aStatus);
NS_ASSERTION(nullptr!=mContent, "bad state -- null content for frame");
const nsStyleVisibility* groupVis = StyleVisibility();
bool collapseGroup = (NS_STYLE_VISIBILITY_COLLAPSE == groupVis->mVisible);
if (collapseGroup) {
GetTableFrame()->SetNeedToCollapse(true);
}
// for every content child that (is a column thingy and does not already have a frame)
// create a frame and adjust it's style
for (nsIFrame *kidFrame = mFrames.FirstChild(); kidFrame;
kidFrame = kidFrame->GetNextSibling()) {
// Give the child frame a chance to reflow, even though we know it'll have 0 size
ReflowOutput kidSize(aReflowInput);
ReflowInput kidReflowInput(aPresContext, aReflowInput, kidFrame,
LogicalSize(kidFrame->GetWritingMode()));
nsReflowStatus status;
ReflowChild(kidFrame, aPresContext, kidSize, kidReflowInput, 0, 0, 0, status);
FinishReflowChild(kidFrame, aPresContext, kidSize, nullptr, 0, 0, 0);
}
aDesiredSize.ClearSize();
aStatus.Reset();
NS_FRAME_SET_TRUNCATION(aStatus, aReflowInput, aDesiredSize);
}
void
nsTableWrapperFrame::UpdateOverflowAreas(ReflowOutput& aMet)
{
aMet.SetOverflowAreasToDesiredBounds();
ConsiderChildOverflow(aMet.mOverflowAreas, InnerTableFrame());
if (mCaptionFrames.NotEmpty()) {
ConsiderChildOverflow(aMet.mOverflowAreas, mCaptionFrames.FirstChild());
}
}
void
nsSimplePageSequenceFrame::SetDesiredSize(ReflowOutput& aDesiredSize,
const ReflowInput& aReflowInput,
nscoord aWidth,
nscoord aHeight)
{
// Aim to fill the whole size of the document, not only so we
// can act as a background in print preview but also handle overflow
// in child page frames correctly.
// Use availableISize so we don't cause a needless horizontal scrollbar.
WritingMode wm = aReflowInput.GetWritingMode();
nscoord scaledWidth = aWidth * PresContext()->GetPrintPreviewScale();
nscoord scaledHeight = aHeight * PresContext()->GetPrintPreviewScale();
nscoord scaledISize = (wm.IsVertical() ? scaledHeight : scaledWidth);
nscoord scaledBSize = (wm.IsVertical() ? scaledWidth : scaledHeight);
aDesiredSize.ISize(wm) = std::max(scaledISize, aReflowInput.AvailableISize());
aDesiredSize.BSize(wm) = std::max(scaledBSize, aReflowInput.ComputedBSize());
}
/* virtual */ void
nsRubyTextFrame::Reflow(nsPresContext* aPresContext,
ReflowOutput& aDesiredSize,
const ReflowInput& aReflowInput,
nsReflowStatus& aStatus)
{
// Even if we want to hide this frame, we have to reflow it first.
// If we leave it dirty, changes to its content will never be
// propagated to the ancestors, then it won't be displayed even if
// the content is no longer the same, until next reflow triggered by
// some other change. In general, we always reflow all the frames we
// created. There might be other problems if we don't do that.
nsRubyContentFrame::Reflow(aPresContext, aDesiredSize, aReflowInput, aStatus);
if (IsAutoHidden()) {
// Reset the ISize. The BSize is not changed so that it won't
// affect vertical positioning in unexpected way.
WritingMode lineWM = aReflowInput.mLineLayout->GetWritingMode();
aDesiredSize.ISize(lineWM) = 0;
aDesiredSize.SetOverflowAreasToDesiredBounds();
}
}
void
nsPlaceholderFrame::Reflow(nsPresContext* aPresContext,
ReflowOutput& aDesiredSize,
const ReflowInput& aReflowInput,
nsReflowStatus& aStatus)
{
#ifdef DEBUG
// We should be getting reflowed before our out-of-flow.
// If this is our first reflow, and our out-of-flow has already received its
// first reflow (before us), complain.
// XXXdholbert This "look for a previous continuation or IB-split sibling"
// code could use nsLayoutUtils::GetPrevContinuationOrIBSplitSibling(), if
// we ever add a function like that. (We currently have a "Next" version.)
if ((GetStateBits() & NS_FRAME_FIRST_REFLOW) &&
!(mOutOfFlowFrame->GetStateBits() & NS_FRAME_FIRST_REFLOW)) {
// Unfortunately, this can currently happen when the placeholder is in a
// later continuation or later IB-split sibling than its out-of-flow (as
// is the case in some of our existing unit tests). So for now, in that
// case, we'll warn instead of asserting.
bool isInContinuationOrIBSplit = false;
nsIFrame* ancestor = this;
while ((ancestor = ancestor->GetParent())) {
if (ancestor->GetPrevContinuation() ||
ancestor->Properties().Get(IBSplitPrevSibling())) {
isInContinuationOrIBSplit = true;
break;
}
}
if (isInContinuationOrIBSplit) {
NS_WARNING("Out-of-flow frame got reflowed before its placeholder");
} else {
NS_ERROR("Out-of-flow frame got reflowed before its placeholder");
}
}
#endif
MarkInReflow();
DO_GLOBAL_REFLOW_COUNT("nsPlaceholderFrame");
DISPLAY_REFLOW(aPresContext, this, aReflowInput, aDesiredSize, aStatus);
aDesiredSize.ClearSize();
aStatus = NS_FRAME_COMPLETE;
NS_FRAME_SET_TRUNCATION(aStatus, aReflowInput, aDesiredSize);
}
/* virtual */ void
nsBackdropFrame::Reflow(nsPresContext* aPresContext,
ReflowOutput& aDesiredSize,
const ReflowInput& aReflowInput,
nsReflowStatus& aStatus)
{
MarkInReflow();
DO_GLOBAL_REFLOW_COUNT("nsBackdropFrame");
DISPLAY_REFLOW(aPresContext, this, aReflowInput, aDesiredSize, aStatus);
// Note that this frame is a child of the viewport frame.
WritingMode wm = aReflowInput.GetWritingMode();
LogicalMargin borderPadding = aReflowInput.ComputedLogicalBorderPadding();
nscoord isize = aReflowInput.ComputedISize() + borderPadding.IStartEnd(wm);
nscoord bsize = aReflowInput.ComputedBSize() + borderPadding.BStartEnd(wm);
aDesiredSize.SetSize(wm, LogicalSize(wm, isize, bsize));
aStatus = NS_FRAME_COMPLETE;
}
/* virtual */ nsresult
nsMathMLmencloseFrame::PlaceInternal(DrawTarget* aDrawTarget,
bool aPlaceOrigin,
ReflowOutput& aDesiredSize,
bool aWidthOnly)
{
///////////////
// Measure the size of our content using the base class to format like an
// inferred mrow.
ReflowOutput baseSize(aDesiredSize.GetWritingMode());
nsresult rv =
nsMathMLContainerFrame::Place(aDrawTarget, false, baseSize);
if (NS_MATHML_HAS_ERROR(mPresentationData.flags) || NS_FAILED(rv)) {
DidReflowChildren(PrincipalChildList().FirstChild());
return rv;
}
nsBoundingMetrics bmBase = baseSize.mBoundingMetrics;
nscoord dx_left = 0, dx_right = 0;
nsBoundingMetrics bmLongdivChar, bmRadicalChar;
nscoord radicalAscent = 0, radicalDescent = 0;
nscoord longdivAscent = 0, longdivDescent = 0;
nscoord psi = 0;
nscoord leading = 0;
///////////////
// Thickness of bars and font metrics
nscoord onePixel = nsPresContext::CSSPixelsToAppUnits(1);
float fontSizeInflation = nsLayoutUtils::FontSizeInflationFor(this);
RefPtr<nsFontMetrics> fm =
nsLayoutUtils::GetFontMetricsForFrame(this, fontSizeInflation);
GetRuleThickness(aDrawTarget, fm, mRuleThickness);
if (mRuleThickness < onePixel) {
mRuleThickness = onePixel;
}
char16_t one = '1';
nsBoundingMetrics bmOne =
nsLayoutUtils::AppUnitBoundsOfString(&one, 1, *fm, aDrawTarget);
///////////////
// General rules: the menclose element takes the size of the enclosed content.
// We add a padding when needed.
// determine padding & psi
nscoord padding = 3 * mRuleThickness;
nscoord delta = padding % onePixel;
if (delta)
padding += onePixel - delta; // round up
if (IsToDraw(NOTATION_LONGDIV) || IsToDraw(NOTATION_RADICAL)) {
GetRadicalParameters(fm, StyleFont()->mMathDisplay ==
NS_MATHML_DISPLAYSTYLE_BLOCK,
mRadicalRuleThickness, leading, psi);
// make sure that the rule appears on on screen
if (mRadicalRuleThickness < onePixel) {
mRadicalRuleThickness = onePixel;
}
// adjust clearance psi to get an exact number of pixels -- this
// gives a nicer & uniform look on stacked radicals (bug 130282)
delta = psi % onePixel;
if (delta) {
psi += onePixel - delta; // round up
}
}
// Set horizontal parameters
if (IsToDraw(NOTATION_ROUNDEDBOX) ||
IsToDraw(NOTATION_TOP) ||
IsToDraw(NOTATION_LEFT) ||
IsToDraw(NOTATION_BOTTOM) ||
IsToDraw(NOTATION_CIRCLE))
dx_left = padding;
if (IsToDraw(NOTATION_ROUNDEDBOX) ||
IsToDraw(NOTATION_TOP) ||
IsToDraw(NOTATION_RIGHT) ||
IsToDraw(NOTATION_BOTTOM) ||
IsToDraw(NOTATION_CIRCLE))
dx_right = padding;
// Set vertical parameters
if (IsToDraw(NOTATION_RIGHT) ||
IsToDraw(NOTATION_LEFT) ||
IsToDraw(NOTATION_UPDIAGONALSTRIKE) ||
IsToDraw(NOTATION_UPDIAGONALARROW) ||
IsToDraw(NOTATION_DOWNDIAGONALSTRIKE) ||
IsToDraw(NOTATION_VERTICALSTRIKE) ||
IsToDraw(NOTATION_CIRCLE) ||
IsToDraw(NOTATION_ROUNDEDBOX) ||
IsToDraw(NOTATION_RADICAL) ||
IsToDraw(NOTATION_LONGDIV) ||
IsToDraw(NOTATION_PHASORANGLE)) {
// set a minimal value for the base height
bmBase.ascent = std::max(bmOne.ascent, bmBase.ascent);
bmBase.descent = std::max(0, bmBase.descent);
}
mBoundingMetrics.ascent = bmBase.ascent;
mBoundingMetrics.descent = bmBase.descent;
if (IsToDraw(NOTATION_ROUNDEDBOX) ||
IsToDraw(NOTATION_TOP) ||
IsToDraw(NOTATION_LEFT) ||
IsToDraw(NOTATION_RIGHT) ||
IsToDraw(NOTATION_CIRCLE))
mBoundingMetrics.ascent += padding;
if (IsToDraw(NOTATION_ROUNDEDBOX) ||
IsToDraw(NOTATION_LEFT) ||
IsToDraw(NOTATION_RIGHT) ||
IsToDraw(NOTATION_BOTTOM) ||
IsToDraw(NOTATION_CIRCLE))
mBoundingMetrics.descent += padding;
///////////////
// phasorangle notation
if (IsToDraw(NOTATION_PHASORANGLE)) {
nscoord phasorangleWidth = kPhasorangleWidth * mRuleThickness;
// Update horizontal parameters
dx_left = std::max(dx_left, phasorangleWidth);
}
///////////////
// updiagonal arrow notation. We need enough space at the top right corner to
// draw the arrow head.
if (IsToDraw(NOTATION_UPDIAGONALARROW)) {
// This is an estimate, see nsDisplayNotation::Paint for the exact head size
nscoord arrowHeadSize = kArrowHeadSize * mRuleThickness;
// We want that the arrow shaft strikes the menclose content and that the
// arrow head does not overlap with that content. Hence we add some space
// on the right. We don't add space on the top but only ensure that the
// ascent is large enough.
dx_right = std::max(dx_right, arrowHeadSize);
mBoundingMetrics.ascent = std::max(mBoundingMetrics.ascent, arrowHeadSize);
}
///////////////
// circle notation: we don't want the ellipse to overlap the enclosed
// content. Hence, we need to increase the size of the bounding box by a
// factor of at least sqrt(2).
if (IsToDraw(NOTATION_CIRCLE)) {
double ratio = (sqrt(2.0) - 1.0) / 2.0;
nscoord padding2;
// Update horizontal parameters
padding2 = ratio * bmBase.width;
dx_left = std::max(dx_left, padding2);
dx_right = std::max(dx_right, padding2);
// Update vertical parameters
padding2 = ratio * (bmBase.ascent + bmBase.descent);
mBoundingMetrics.ascent = std::max(mBoundingMetrics.ascent,
bmBase.ascent + padding2);
mBoundingMetrics.descent = std::max(mBoundingMetrics.descent,
bmBase.descent + padding2);
}
///////////////
// longdiv notation:
if (IsToDraw(NOTATION_LONGDIV)) {
if (aWidthOnly) {
nscoord longdiv_width = mMathMLChar[mLongDivCharIndex].
GetMaxWidth(PresContext(), aDrawTarget, fontSizeInflation);
// Update horizontal parameters
dx_left = std::max(dx_left, longdiv_width);
} else {
// Stretch the parenthesis to the appropriate height if it is not
// big enough.
nsBoundingMetrics contSize = bmBase;
contSize.ascent = mRuleThickness;
contSize.descent = bmBase.ascent + bmBase.descent + psi;
// height(longdiv) should be >= height(base) + psi + mRuleThickness
mMathMLChar[mLongDivCharIndex].Stretch(PresContext(), aDrawTarget,
fontSizeInflation,
NS_STRETCH_DIRECTION_VERTICAL,
contSize, bmLongdivChar,
NS_STRETCH_LARGER, false);
mMathMLChar[mLongDivCharIndex].GetBoundingMetrics(bmLongdivChar);
// Update horizontal parameters
dx_left = std::max(dx_left, bmLongdivChar.width);
// Update vertical parameters
longdivAscent = bmBase.ascent + psi + mRuleThickness;
longdivDescent = std::max(bmBase.descent,
(bmLongdivChar.ascent + bmLongdivChar.descent -
longdivAscent));
mBoundingMetrics.ascent = std::max(mBoundingMetrics.ascent,
longdivAscent);
mBoundingMetrics.descent = std::max(mBoundingMetrics.descent,
longdivDescent);
}
}
///////////////
// radical notation:
if (IsToDraw(NOTATION_RADICAL)) {
nscoord *dx_leading = StyleVisibility()->mDirection ? &dx_right : &dx_left;
if (aWidthOnly) {
nscoord radical_width = mMathMLChar[mRadicalCharIndex].
GetMaxWidth(PresContext(), aDrawTarget, fontSizeInflation);
// Update horizontal parameters
*dx_leading = std::max(*dx_leading, radical_width);
} else {
// Stretch the radical symbol to the appropriate height if it is not
// big enough.
nsBoundingMetrics contSize = bmBase;
contSize.ascent = mRadicalRuleThickness;
contSize.descent = bmBase.ascent + bmBase.descent + psi;
// height(radical) should be >= height(base) + psi + mRadicalRuleThickness
mMathMLChar[mRadicalCharIndex].Stretch(PresContext(), aDrawTarget,
fontSizeInflation,
NS_STRETCH_DIRECTION_VERTICAL,
contSize, bmRadicalChar,
NS_STRETCH_LARGER,
StyleVisibility()->mDirection);
mMathMLChar[mRadicalCharIndex].GetBoundingMetrics(bmRadicalChar);
// Update horizontal parameters
*dx_leading = std::max(*dx_leading, bmRadicalChar.width);
// Update vertical parameters
radicalAscent = bmBase.ascent + psi + mRadicalRuleThickness;
radicalDescent = std::max(bmBase.descent,
(bmRadicalChar.ascent + bmRadicalChar.descent -
radicalAscent));
mBoundingMetrics.ascent = std::max(mBoundingMetrics.ascent,
radicalAscent);
mBoundingMetrics.descent = std::max(mBoundingMetrics.descent,
radicalDescent);
}
}
///////////////
//
if (IsToDraw(NOTATION_CIRCLE) ||
IsToDraw(NOTATION_ROUNDEDBOX) ||
(IsToDraw(NOTATION_LEFT) && IsToDraw(NOTATION_RIGHT))) {
// center the menclose around the content (horizontally)
dx_left = dx_right = std::max(dx_left, dx_right);
}
///////////////
// The maximum size is now computed: set the remaining parameters
mBoundingMetrics.width = dx_left + bmBase.width + dx_right;
mBoundingMetrics.leftBearing = std::min(0, dx_left + bmBase.leftBearing);
mBoundingMetrics.rightBearing =
std::max(mBoundingMetrics.width, dx_left + bmBase.rightBearing);
aDesiredSize.Width() = mBoundingMetrics.width;
aDesiredSize.SetBlockStartAscent(std::max(mBoundingMetrics.ascent,
baseSize.BlockStartAscent()));
aDesiredSize.Height() = aDesiredSize.BlockStartAscent() +
std::max(mBoundingMetrics.descent,
baseSize.Height() - baseSize.BlockStartAscent());
if (IsToDraw(NOTATION_LONGDIV) || IsToDraw(NOTATION_RADICAL)) {
nscoord desiredSizeAscent = aDesiredSize.BlockStartAscent();
nscoord desiredSizeDescent = aDesiredSize.Height() -
aDesiredSize.BlockStartAscent();
if (IsToDraw(NOTATION_LONGDIV)) {
desiredSizeAscent = std::max(desiredSizeAscent,
longdivAscent + leading);
desiredSizeDescent = std::max(desiredSizeDescent,
longdivDescent + mRuleThickness);
}
if (IsToDraw(NOTATION_RADICAL)) {
desiredSizeAscent = std::max(desiredSizeAscent,
radicalAscent + leading);
desiredSizeDescent = std::max(desiredSizeDescent,
radicalDescent + mRadicalRuleThickness);
}
aDesiredSize.SetBlockStartAscent(desiredSizeAscent);
aDesiredSize.Height() = desiredSizeAscent + desiredSizeDescent;
}
if (IsToDraw(NOTATION_CIRCLE) ||
IsToDraw(NOTATION_ROUNDEDBOX) ||
(IsToDraw(NOTATION_TOP) && IsToDraw(NOTATION_BOTTOM))) {
// center the menclose around the content (vertically)
nscoord dy = std::max(aDesiredSize.BlockStartAscent() - bmBase.ascent,
aDesiredSize.Height() -
aDesiredSize.BlockStartAscent() - bmBase.descent);
aDesiredSize.SetBlockStartAscent(bmBase.ascent + dy);
aDesiredSize.Height() = aDesiredSize.BlockStartAscent() + bmBase.descent + dy;
}
// Update mBoundingMetrics ascent/descent
if (IsToDraw(NOTATION_TOP) ||
IsToDraw(NOTATION_RIGHT) ||
IsToDraw(NOTATION_LEFT) ||
IsToDraw(NOTATION_UPDIAGONALSTRIKE) ||
IsToDraw(NOTATION_UPDIAGONALARROW) ||
IsToDraw(NOTATION_DOWNDIAGONALSTRIKE) ||
IsToDraw(NOTATION_VERTICALSTRIKE) ||
IsToDraw(NOTATION_CIRCLE) ||
IsToDraw(NOTATION_ROUNDEDBOX))
mBoundingMetrics.ascent = aDesiredSize.BlockStartAscent();
if (IsToDraw(NOTATION_BOTTOM) ||
IsToDraw(NOTATION_RIGHT) ||
IsToDraw(NOTATION_LEFT) ||
IsToDraw(NOTATION_UPDIAGONALSTRIKE) ||
IsToDraw(NOTATION_UPDIAGONALARROW) ||
IsToDraw(NOTATION_DOWNDIAGONALSTRIKE) ||
IsToDraw(NOTATION_VERTICALSTRIKE) ||
IsToDraw(NOTATION_CIRCLE) ||
IsToDraw(NOTATION_ROUNDEDBOX))
mBoundingMetrics.descent = aDesiredSize.Height() - aDesiredSize.BlockStartAscent();
// phasorangle notation:
// move up from the bottom by the angled line height
if (IsToDraw(NOTATION_PHASORANGLE))
mBoundingMetrics.ascent = std::max(mBoundingMetrics.ascent, 2 * kPhasorangleWidth * mRuleThickness - mBoundingMetrics.descent);
aDesiredSize.mBoundingMetrics = mBoundingMetrics;
mReference.x = 0;
mReference.y = aDesiredSize.BlockStartAscent();
if (aPlaceOrigin) {
//////////////////
// Set position and size of MathMLChars
if (IsToDraw(NOTATION_LONGDIV))
mMathMLChar[mLongDivCharIndex].SetRect(nsRect(dx_left -
bmLongdivChar.width,
aDesiredSize.BlockStartAscent() -
longdivAscent,
bmLongdivChar.width,
bmLongdivChar.ascent +
bmLongdivChar.descent));
if (IsToDraw(NOTATION_RADICAL)) {
nscoord dx = (StyleVisibility()->mDirection ?
dx_left + bmBase.width : dx_left - bmRadicalChar.width);
mMathMLChar[mRadicalCharIndex].SetRect(nsRect(dx,
aDesiredSize.BlockStartAscent() -
radicalAscent,
bmRadicalChar.width,
bmRadicalChar.ascent +
bmRadicalChar.descent));
}
mContentWidth = bmBase.width;
//////////////////
// Finish reflowing child frames
PositionRowChildFrames(dx_left, aDesiredSize.BlockStartAscent());
}
return NS_OK;
}
void
nsMathMLmrootFrame::Reflow(nsPresContext* aPresContext,
ReflowOutput& aDesiredSize,
const ReflowInput& aReflowInput,
nsReflowStatus& aStatus)
{
MarkInReflow();
nsReflowStatus childStatus;
mPresentationData.flags &= ~NS_MATHML_ERROR;
aDesiredSize.ClearSize();
aDesiredSize.SetBlockStartAscent(0);
nsBoundingMetrics bmSqr, bmBase, bmIndex;
DrawTarget* drawTarget = aReflowInput.mRenderingContext->GetDrawTarget();
//////////////////
// Reflow Children
int32_t count = 0;
nsIFrame* baseFrame = nullptr;
nsIFrame* indexFrame = nullptr;
ReflowOutput baseSize(aReflowInput);
ReflowOutput indexSize(aReflowInput);
nsIFrame* childFrame = mFrames.FirstChild();
while (childFrame) {
// ask our children to compute their bounding metrics
ReflowOutput childDesiredSize(aReflowInput,
aDesiredSize.mFlags
| NS_REFLOW_CALC_BOUNDING_METRICS);
WritingMode wm = childFrame->GetWritingMode();
LogicalSize availSize = aReflowInput.ComputedSize(wm);
availSize.BSize(wm) = NS_UNCONSTRAINEDSIZE;
ReflowInput childReflowInput(aPresContext, aReflowInput,
childFrame, availSize);
ReflowChild(childFrame, aPresContext,
childDesiredSize, childReflowInput, childStatus);
//NS_ASSERTION(childStatus.IsComplete(), "bad status");
if (0 == count) {
// base
baseFrame = childFrame;
baseSize = childDesiredSize;
bmBase = childDesiredSize.mBoundingMetrics;
}
else if (1 == count) {
// index
indexFrame = childFrame;
indexSize = childDesiredSize;
bmIndex = childDesiredSize.mBoundingMetrics;
}
count++;
childFrame = childFrame->GetNextSibling();
}
if (2 != count) {
// report an error, encourage people to get their markups in order
ReportChildCountError();
ReflowError(drawTarget, aDesiredSize);
aStatus.Reset();
NS_FRAME_SET_TRUNCATION(aStatus, aReflowInput, aDesiredSize);
// Call DidReflow() for the child frames we successfully did reflow.
DidReflowChildren(mFrames.FirstChild(), childFrame);
return;
}
////////////
// Prepare the radical symbol and the overline bar
float fontSizeInflation = nsLayoutUtils::FontSizeInflationFor(this);
RefPtr<nsFontMetrics> fm =
nsLayoutUtils::GetFontMetricsForFrame(this, fontSizeInflation);
nscoord ruleThickness, leading, psi;
GetRadicalParameters(fm, StyleFont()->mMathDisplay ==
NS_MATHML_DISPLAYSTYLE_BLOCK,
ruleThickness, leading, psi);
// built-in: adjust clearance psi to emulate \mathstrut using '1' (TexBook, p.131)
char16_t one = '1';
nsBoundingMetrics bmOne =
nsLayoutUtils::AppUnitBoundsOfString(&one, 1, *fm, drawTarget);
if (bmOne.ascent > bmBase.ascent)
psi += bmOne.ascent - bmBase.ascent;
// make sure that the rule appears on on screen
nscoord onePixel = nsPresContext::CSSPixelsToAppUnits(1);
if (ruleThickness < onePixel) {
ruleThickness = onePixel;
}
// adjust clearance psi to get an exact number of pixels -- this
// gives a nicer & uniform look on stacked radicals (bug 130282)
nscoord delta = psi % onePixel;
if (delta)
psi += onePixel - delta; // round up
// Stretch the radical symbol to the appropriate height if it is not big enough.
nsBoundingMetrics contSize = bmBase;
contSize.descent = bmBase.ascent + bmBase.descent + psi;
contSize.ascent = ruleThickness;
// height(radical) should be >= height(base) + psi + ruleThickness
nsBoundingMetrics radicalSize;
mSqrChar.Stretch(aPresContext, drawTarget,
fontSizeInflation,
NS_STRETCH_DIRECTION_VERTICAL,
contSize, radicalSize,
NS_STRETCH_LARGER,
StyleVisibility()->mDirection);
// radicalSize have changed at this point, and should match with
// the bounding metrics of the char
mSqrChar.GetBoundingMetrics(bmSqr);
// Update the desired size for the container (like msqrt, index is not yet included)
// the baseline will be that of the base.
mBoundingMetrics.ascent = bmBase.ascent + psi + ruleThickness;
mBoundingMetrics.descent =
std::max(bmBase.descent,
(bmSqr.ascent + bmSqr.descent - mBoundingMetrics.ascent));
mBoundingMetrics.width = bmSqr.width + bmBase.width;
mBoundingMetrics.leftBearing = bmSqr.leftBearing;
mBoundingMetrics.rightBearing = bmSqr.width +
std::max(bmBase.width, bmBase.rightBearing); // take also care of the rule
aDesiredSize.SetBlockStartAscent(mBoundingMetrics.ascent + leading);
aDesiredSize.Height() = aDesiredSize.BlockStartAscent() +
std::max(baseSize.Height() - baseSize.BlockStartAscent(),
mBoundingMetrics.descent + ruleThickness);
aDesiredSize.Width() = mBoundingMetrics.width;
/////////////
// Re-adjust the desired size to include the index.
// the index is raised by some fraction of the height
// of the radical, see \mroot macro in App. B, TexBook
float raiseIndexPercent = 0.6f;
gfxFont* mathFont = fm->GetThebesFontGroup()->GetFirstMathFont();
if (mathFont) {
raiseIndexPercent = mathFont->MathTable()->
Constant(gfxMathTable::RadicalDegreeBottomRaisePercent);
}
nscoord raiseIndexDelta = NSToCoordRound(raiseIndexPercent *
(bmSqr.ascent + bmSqr.descent));
nscoord indexRaisedAscent = mBoundingMetrics.ascent // top of radical
- (bmSqr.ascent + bmSqr.descent) // to bottom of radical
+ raiseIndexDelta + bmIndex.ascent + bmIndex.descent; // to top of raised index
nscoord indexClearance = 0;
if (mBoundingMetrics.ascent < indexRaisedAscent) {
indexClearance =
indexRaisedAscent - mBoundingMetrics.ascent; // excess gap introduced by a tall index
mBoundingMetrics.ascent = indexRaisedAscent;
nscoord descent = aDesiredSize.Height() - aDesiredSize.BlockStartAscent();
aDesiredSize.SetBlockStartAscent(mBoundingMetrics.ascent + leading);
aDesiredSize.Height() = aDesiredSize.BlockStartAscent() + descent;
}
nscoord dxIndex, dxSqr;
GetRadicalXOffsets(bmIndex.width, bmSqr.width, fm, &dxIndex, &dxSqr);
mBoundingMetrics.width = dxSqr + bmSqr.width + bmBase.width;
mBoundingMetrics.leftBearing =
std::min(dxIndex + bmIndex.leftBearing, dxSqr + bmSqr.leftBearing);
mBoundingMetrics.rightBearing = dxSqr + bmSqr.width +
std::max(bmBase.width, bmBase.rightBearing);
aDesiredSize.Width() = mBoundingMetrics.width;
aDesiredSize.mBoundingMetrics = mBoundingMetrics;
GatherAndStoreOverflow(&aDesiredSize);
// place the index
nscoord dx = dxIndex;
nscoord dy = aDesiredSize.BlockStartAscent() -
(indexRaisedAscent + indexSize.BlockStartAscent() - bmIndex.ascent);
FinishReflowChild(indexFrame, aPresContext, indexSize, nullptr,
MirrorIfRTL(aDesiredSize.Width(), indexSize.Width(), dx),
dy, 0);
// place the radical symbol and the radical bar
dx = dxSqr;
dy = indexClearance + leading; // leave a leading at the top
mSqrChar.SetRect(nsRect(MirrorIfRTL(aDesiredSize.Width(), bmSqr.width, dx),
dy, bmSqr.width, bmSqr.ascent + bmSqr.descent));
dx += bmSqr.width;
mBarRect.SetRect(MirrorIfRTL(aDesiredSize.Width(), bmBase.width, dx),
dy, bmBase.width, ruleThickness);
// place the base
dy = aDesiredSize.BlockStartAscent() - baseSize.BlockStartAscent();
FinishReflowChild(baseFrame, aPresContext, baseSize, nullptr,
MirrorIfRTL(aDesiredSize.Width(), baseSize.Width(), dx),
dy, 0);
mReference.x = 0;
mReference.y = aDesiredSize.BlockStartAscent();
aStatus.Reset();
NS_FRAME_SET_TRUNCATION(aStatus, aReflowInput, aDesiredSize);
}
void
nsFieldSetFrame::Reflow(nsPresContext* aPresContext,
ReflowOutput& aDesiredSize,
const ReflowInput& aReflowInput,
nsReflowStatus& aStatus)
{
MarkInReflow();
DO_GLOBAL_REFLOW_COUNT("nsFieldSetFrame");
DISPLAY_REFLOW(aPresContext, this, aReflowInput, aDesiredSize, aStatus);
NS_PRECONDITION(aReflowInput.ComputedISize() != NS_INTRINSICSIZE,
"Should have a precomputed inline-size!");
// Initialize OUT parameter
aStatus = NS_FRAME_COMPLETE;
nsOverflowAreas ocBounds;
nsReflowStatus ocStatus = NS_FRAME_COMPLETE;
if (GetPrevInFlow()) {
ReflowOverflowContainerChildren(aPresContext, aReflowInput, ocBounds, 0,
ocStatus);
}
//------------ Handle Incremental Reflow -----------------
bool reflowInner;
bool reflowLegend;
nsIFrame* legend = GetLegend();
nsIFrame* inner = GetInner();
if (aReflowInput.ShouldReflowAllKids()) {
reflowInner = inner != nullptr;
reflowLegend = legend != nullptr;
} else {
reflowInner = inner && NS_SUBTREE_DIRTY(inner);
reflowLegend = legend && NS_SUBTREE_DIRTY(legend);
}
// We don't allow fieldsets to break vertically. If we did, we'd
// need logic here to push and pull overflow frames.
// Since we're not applying our padding in this frame, we need to add it here
// to compute the available width for our children.
WritingMode wm = GetWritingMode();
WritingMode innerWM = inner ? inner->GetWritingMode() : wm;
WritingMode legendWM = legend ? legend->GetWritingMode() : wm;
LogicalSize innerAvailSize = aReflowInput.ComputedSizeWithPadding(innerWM);
LogicalSize legendAvailSize = aReflowInput.ComputedSizeWithPadding(legendWM);
innerAvailSize.BSize(innerWM) = legendAvailSize.BSize(legendWM) =
NS_UNCONSTRAINEDSIZE;
NS_ASSERTION(!inner ||
nsLayoutUtils::IntrinsicForContainer(aReflowInput.mRenderingContext,
inner,
nsLayoutUtils::MIN_ISIZE) <=
innerAvailSize.ISize(innerWM),
"Bogus availSize.ISize; should be bigger");
NS_ASSERTION(!legend ||
nsLayoutUtils::IntrinsicForContainer(aReflowInput.mRenderingContext,
legend,
nsLayoutUtils::MIN_ISIZE) <=
legendAvailSize.ISize(legendWM),
"Bogus availSize.ISize; should be bigger");
// get our border and padding
LogicalMargin border = aReflowInput.ComputedLogicalBorderPadding() -
aReflowInput.ComputedLogicalPadding();
// Figure out how big the legend is if there is one.
// get the legend's margin
LogicalMargin legendMargin(wm);
// reflow the legend only if needed
Maybe<ReflowInput> legendReflowInput;
if (legend) {
legendReflowInput.emplace(aPresContext, aReflowInput, legend,
legendAvailSize);
}
if (reflowLegend) {
ReflowOutput legendDesiredSize(aReflowInput);
// We'll move the legend to its proper place later, so the position
// and containerSize passed here are unimportant.
const nsSize dummyContainerSize;
ReflowChild(legend, aPresContext, legendDesiredSize, *legendReflowInput,
wm, LogicalPoint(wm), dummyContainerSize,
NS_FRAME_NO_MOVE_FRAME, aStatus);
#ifdef NOISY_REFLOW
printf(" returned (%d, %d)\n",
legendDesiredSize.Width(), legendDesiredSize.Height());
#endif
// figure out the legend's rectangle
legendMargin = legend->GetLogicalUsedMargin(wm);
mLegendRect =
LogicalRect(wm, 0, 0,
legendDesiredSize.ISize(wm) + legendMargin.IStartEnd(wm),
legendDesiredSize.BSize(wm) + legendMargin.BStartEnd(wm));
nscoord oldSpace = mLegendSpace;
mLegendSpace = 0;
if (mLegendRect.BSize(wm) > border.BStart(wm)) {
// center the border on the legend
mLegendSpace = mLegendRect.BSize(wm) - border.BStart(wm);
} else {
mLegendRect.BStart(wm) =
(border.BStart(wm) - mLegendRect.BSize(wm)) / 2;
}
// if the legend space changes then we need to reflow the
// content area as well.
if (mLegendSpace != oldSpace && inner) {
reflowInner = true;
}
FinishReflowChild(legend, aPresContext, legendDesiredSize,
legendReflowInput.ptr(), wm, LogicalPoint(wm),
dummyContainerSize, NS_FRAME_NO_MOVE_FRAME);
} else if (!legend) {
mLegendRect.SetEmpty();
mLegendSpace = 0;
} else {
// mLegendSpace and mLegendRect haven't changed, but we need
// the used margin when placing the legend.
legendMargin = legend->GetLogicalUsedMargin(wm);
}
// This containerSize is incomplete as yet: it does not include the size
// of the |inner| frame itself.
nsSize containerSize = (LogicalSize(wm, 0, mLegendSpace) +
border.Size(wm)).GetPhysicalSize(wm);
// reflow the content frame only if needed
if (reflowInner) {
ReflowInput kidReflowInput(aPresContext, aReflowInput, inner,
innerAvailSize, nullptr,
ReflowInput::CALLER_WILL_INIT);
// Override computed padding, in case it's percentage padding
kidReflowInput.Init(aPresContext, nullptr, nullptr,
&aReflowInput.ComputedPhysicalPadding());
// Our child is "height:100%" but we actually want its height to be reduced
// by the amount of content-height the legend is eating up, unless our
// height is unconstrained (in which case the child's will be too).
if (aReflowInput.ComputedBSize() != NS_UNCONSTRAINEDSIZE) {
kidReflowInput.SetComputedBSize(
std::max(0, aReflowInput.ComputedBSize() - mLegendSpace));
}
if (aReflowInput.ComputedMinBSize() > 0) {
kidReflowInput.ComputedMinBSize() =
std::max(0, aReflowInput.ComputedMinBSize() - mLegendSpace);
}
if (aReflowInput.ComputedMaxBSize() != NS_UNCONSTRAINEDSIZE) {
kidReflowInput.ComputedMaxBSize() =
std::max(0, aReflowInput.ComputedMaxBSize() - mLegendSpace);
}
ReflowOutput kidDesiredSize(kidReflowInput,
aDesiredSize.mFlags);
// Reflow the frame
NS_ASSERTION(kidReflowInput.ComputedPhysicalMargin() == nsMargin(0,0,0,0),
"Margins on anonymous fieldset child not supported!");
LogicalPoint pt(wm, border.IStart(wm), border.BStart(wm) + mLegendSpace);
// We don't know the correct containerSize until we have reflowed |inner|,
// so we use a dummy value for now; FinishReflowChild will fix the position
// if necessary.
const nsSize dummyContainerSize;
ReflowChild(inner, aPresContext, kidDesiredSize, kidReflowInput,
wm, pt, dummyContainerSize, 0, aStatus);
// Update containerSize to account for size of the inner frame, so that
// FinishReflowChild can position it correctly.
containerSize += kidDesiredSize.PhysicalSize();
FinishReflowChild(inner, aPresContext, kidDesiredSize,
&kidReflowInput, wm, pt, containerSize, 0);
NS_FRAME_TRACE_REFLOW_OUT("FieldSet::Reflow", aStatus);
} else if (inner) {
// |inner| didn't need to be reflowed but we do need to include its size
// in containerSize.
containerSize += inner->GetSize();
}
LogicalRect contentRect(wm);
if (inner) {
// We don't support margins on inner, so our content rect is just the
// inner's border-box. (We don't really care about container size at this
// point, as we'll figure out the actual positioning later.)
contentRect = inner->GetLogicalRect(wm, containerSize);
}
// Our content rect must fill up the available width
LogicalSize availSize = aReflowInput.ComputedSizeWithPadding(wm);
if (availSize.ISize(wm) > contentRect.ISize(wm)) {
contentRect.ISize(wm) = innerAvailSize.ISize(wm);
}
if (legend) {
// The legend is positioned inline-wards within the inner's content rect
// (so that padding on the fieldset affects the legend position).
LogicalRect innerContentRect = contentRect;
innerContentRect.Deflate(wm, aReflowInput.ComputedLogicalPadding());
// If the inner content rect is larger than the legend, we can align the
// legend.
if (innerContentRect.ISize(wm) > mLegendRect.ISize(wm)) {
// NOTE legend @align values are: left/right/center/top/bottom.
// GetLogicalAlign converts left/right to start/end for the given WM.
// @see HTMLLegendElement::ParseAttribute, nsLegendFrame::GetLogicalAlign
int32_t align = static_cast<nsLegendFrame*>
(legend->GetContentInsertionFrame())->GetLogicalAlign(wm);
switch (align) {
case NS_STYLE_TEXT_ALIGN_END:
mLegendRect.IStart(wm) =
innerContentRect.IEnd(wm) - mLegendRect.ISize(wm);
break;
case NS_STYLE_TEXT_ALIGN_CENTER:
// Note: rounding removed; there doesn't seem to be any need
mLegendRect.IStart(wm) = innerContentRect.IStart(wm) +
(innerContentRect.ISize(wm) - mLegendRect.ISize(wm)) / 2;
break;
case NS_STYLE_TEXT_ALIGN_START:
case NS_STYLE_VERTICAL_ALIGN_TOP:
case NS_STYLE_VERTICAL_ALIGN_BOTTOM:
mLegendRect.IStart(wm) = innerContentRect.IStart(wm);
break;
default:
MOZ_ASSERT_UNREACHABLE("unexpected GetLogicalAlign value");
}
} else {
// otherwise make place for the legend
mLegendRect.IStart(wm) = innerContentRect.IStart(wm);
innerContentRect.ISize(wm) = mLegendRect.ISize(wm);
contentRect.ISize(wm) = mLegendRect.ISize(wm) +
aReflowInput.ComputedLogicalPadding().IStartEnd(wm);
}
// place the legend
LogicalRect actualLegendRect = mLegendRect;
actualLegendRect.Deflate(wm, legendMargin);
LogicalPoint actualLegendPos(actualLegendRect.Origin(wm));
// Note that legend's writing mode may be different from the fieldset's,
// so we need to convert offsets before applying them to it (bug 1134534).
LogicalMargin offsets =
legendReflowInput->ComputedLogicalOffsets().
ConvertTo(wm, legendReflowInput->GetWritingMode());
ReflowInput::ApplyRelativePositioning(legend, wm, offsets,
&actualLegendPos,
containerSize);
legend->SetPosition(wm, actualLegendPos, containerSize);
nsContainerFrame::PositionFrameView(legend);
nsContainerFrame::PositionChildViews(legend);
}
// Return our size and our result.
LogicalSize finalSize(wm, contentRect.ISize(wm) + border.IStartEnd(wm),
mLegendSpace + border.BStartEnd(wm) +
(inner ? inner->BSize(wm) : 0));
aDesiredSize.SetSize(wm, finalSize);
aDesiredSize.SetOverflowAreasToDesiredBounds();
if (legend) {
ConsiderChildOverflow(aDesiredSize.mOverflowAreas, legend);
}
if (inner) {
ConsiderChildOverflow(aDesiredSize.mOverflowAreas, inner);
}
// Merge overflow container bounds and status.
aDesiredSize.mOverflowAreas.UnionWith(ocBounds);
NS_MergeReflowStatusInto(&aStatus, ocStatus);
FinishReflowWithAbsoluteFrames(aPresContext, aDesiredSize, aReflowInput, aStatus);
InvalidateFrame();
NS_FRAME_SET_TRUNCATION(aStatus, aReflowInput, aDesiredSize);
}
/* virtual */ void
nsRubyFrame::Reflow(nsPresContext* aPresContext,
ReflowOutput& aDesiredSize,
const ReflowInput& aReflowInput,
nsReflowStatus& aStatus)
{
MarkInReflow();
DO_GLOBAL_REFLOW_COUNT("nsRubyFrame");
DISPLAY_REFLOW(aPresContext, this, aReflowInput, aDesiredSize, aStatus);
if (!aReflowInput.mLineLayout) {
NS_ASSERTION(aReflowInput.mLineLayout,
"No line layout provided to RubyFrame reflow method.");
aStatus = NS_FRAME_COMPLETE;
return;
}
// Grab overflow frames from prev-in-flow and its own.
MoveOverflowToChildList();
// Clear leadings
mBStartLeading = mBEndLeading = 0;
// Begin the span for the ruby frame
WritingMode frameWM = aReflowInput.GetWritingMode();
WritingMode lineWM = aReflowInput.mLineLayout->GetWritingMode();
LogicalMargin borderPadding = aReflowInput.ComputedLogicalBorderPadding();
nscoord startEdge = 0;
const bool boxDecorationBreakClone =
StyleBorder()->mBoxDecorationBreak == StyleBoxDecorationBreak::Clone;
if (boxDecorationBreakClone || !GetPrevContinuation()) {
startEdge = borderPadding.IStart(frameWM);
}
NS_ASSERTION(aReflowInput.AvailableISize() != NS_UNCONSTRAINEDSIZE,
"should no longer use available widths");
nscoord availableISize = aReflowInput.AvailableISize();
availableISize -= startEdge + borderPadding.IEnd(frameWM);
aReflowInput.mLineLayout->BeginSpan(this, &aReflowInput,
startEdge, availableISize, &mBaseline);
aStatus = NS_FRAME_COMPLETE;
for (RubySegmentEnumerator e(this); !e.AtEnd(); e.Next()) {
ReflowSegment(aPresContext, aReflowInput, e.GetBaseContainer(), aStatus);
if (NS_INLINE_IS_BREAK(aStatus)) {
// A break occurs when reflowing the segment.
// Don't continue reflowing more segments.
break;
}
}
ContinuationTraversingState pullState(this);
while (aStatus == NS_FRAME_COMPLETE) {
nsRubyBaseContainerFrame* baseContainer =
PullOneSegment(aReflowInput.mLineLayout, pullState);
if (!baseContainer) {
// No more continuations after, finish now.
break;
}
ReflowSegment(aPresContext, aReflowInput, baseContainer, aStatus);
}
// We never handle overflow in ruby.
MOZ_ASSERT(!NS_FRAME_OVERFLOW_IS_INCOMPLETE(aStatus));
aDesiredSize.ISize(lineWM) = aReflowInput.mLineLayout->EndSpan(this);
if (boxDecorationBreakClone || !GetPrevContinuation()) {
aDesiredSize.ISize(lineWM) += borderPadding.IStart(frameWM);
}
if (boxDecorationBreakClone || NS_FRAME_IS_COMPLETE(aStatus)) {
aDesiredSize.ISize(lineWM) += borderPadding.IEnd(frameWM);
}
nsLayoutUtils::SetBSizeFromFontMetrics(this, aDesiredSize,
borderPadding, lineWM, frameWM);
}
void
nsVideoFrame::Reflow(nsPresContext* aPresContext,
ReflowOutput& aMetrics,
const ReflowInput& aReflowInput,
nsReflowStatus& aStatus)
{
MarkInReflow();
DO_GLOBAL_REFLOW_COUNT("nsVideoFrame");
DISPLAY_REFLOW(aPresContext, this, aReflowInput, aMetrics, aStatus);
NS_FRAME_TRACE(NS_FRAME_TRACE_CALLS,
("enter nsVideoFrame::Reflow: availSize=%d,%d",
aReflowInput.AvailableWidth(), aReflowInput.AvailableHeight()));
NS_PRECONDITION(mState & NS_FRAME_IN_REFLOW, "frame is not in reflow");
aStatus = NS_FRAME_COMPLETE;
aMetrics.Width() = aReflowInput.ComputedWidth();
aMetrics.Height() = aReflowInput.ComputedHeight();
// stash this away so we can compute our inner area later
mBorderPadding = aReflowInput.ComputedPhysicalBorderPadding();
aMetrics.Width() += mBorderPadding.left + mBorderPadding.right;
aMetrics.Height() += mBorderPadding.top + mBorderPadding.bottom;
// Reflow the child frames. We may have up to two, an image frame
// which is the poster, and a box frame, which is the video controls.
for (nsIFrame* child : mFrames) {
if (child->GetContent() == mPosterImage) {
// Reflow the poster frame.
nsImageFrame* imageFrame = static_cast<nsImageFrame*>(child);
ReflowOutput kidDesiredSize(aReflowInput);
WritingMode wm = imageFrame->GetWritingMode();
LogicalSize availableSize = aReflowInput.AvailableSize(wm);
LogicalSize cbSize = aMetrics.Size(aMetrics.GetWritingMode()).
ConvertTo(wm, aMetrics.GetWritingMode());
ReflowInput kidReflowInput(aPresContext,
aReflowInput,
imageFrame,
availableSize,
&cbSize);
nsRect posterRenderRect;
if (ShouldDisplayPoster()) {
posterRenderRect =
nsRect(nsPoint(mBorderPadding.left, mBorderPadding.top),
nsSize(aReflowInput.ComputedWidth(),
aReflowInput.ComputedHeight()));
}
kidReflowInput.SetComputedWidth(posterRenderRect.width);
kidReflowInput.SetComputedHeight(posterRenderRect.height);
ReflowChild(imageFrame, aPresContext, kidDesiredSize, kidReflowInput,
posterRenderRect.x, posterRenderRect.y, 0, aStatus);
FinishReflowChild(imageFrame, aPresContext,
kidDesiredSize, &kidReflowInput,
posterRenderRect.x, posterRenderRect.y, 0);
} else if (child->GetContent() == mVideoControls) {
// Reflow the video controls frame.
nsBoxLayoutState boxState(PresContext(), aReflowInput.mRenderingContext);
nsSize size = child->GetSize();
nsBoxFrame::LayoutChildAt(boxState,
child,
nsRect(mBorderPadding.left,
mBorderPadding.top,
aReflowInput.ComputedWidth(),
aReflowInput.ComputedHeight()));
if (child->GetSize() != size) {
RefPtr<Runnable> event = new DispatchResizeToControls(child->GetContent());
nsContentUtils::AddScriptRunner(event);
}
} else if (child->GetContent() == mCaptionDiv) {
// Reflow to caption div
ReflowOutput kidDesiredSize(aReflowInput);
WritingMode wm = child->GetWritingMode();
LogicalSize availableSize = aReflowInput.AvailableSize(wm);
LogicalSize cbSize = aMetrics.Size(aMetrics.GetWritingMode()).
ConvertTo(wm, aMetrics.GetWritingMode());
ReflowInput kidReflowInput(aPresContext,
aReflowInput,
child,
availableSize,
&cbSize);
nsSize size(aReflowInput.ComputedWidth(), aReflowInput.ComputedHeight());
size.width -= kidReflowInput.ComputedPhysicalBorderPadding().LeftRight();
size.height -= kidReflowInput.ComputedPhysicalBorderPadding().TopBottom();
kidReflowInput.SetComputedWidth(std::max(size.width, 0));
kidReflowInput.SetComputedHeight(std::max(size.height, 0));
ReflowChild(child, aPresContext, kidDesiredSize, kidReflowInput,
mBorderPadding.left, mBorderPadding.top, 0, aStatus);
FinishReflowChild(child, aPresContext,
kidDesiredSize, &kidReflowInput,
mBorderPadding.left, mBorderPadding.top, 0);
}
}
aMetrics.SetOverflowAreasToDesiredBounds();
FinishAndStoreOverflow(&aMetrics);
NS_FRAME_TRACE(NS_FRAME_TRACE_CALLS,
("exit nsVideoFrame::Reflow: size=%d,%d",
aMetrics.Width(), aMetrics.Height()));
NS_FRAME_SET_TRUNCATION(aStatus, aReflowInput, aMetrics);
}
bool
nsColumnSetFrame::ReflowChildren(ReflowOutput& aDesiredSize,
const ReflowInput& aReflowInput,
nsReflowStatus& aStatus,
const ReflowConfig& aConfig,
bool aUnboundedLastColumn,
nsCollapsingMargin* aCarriedOutBEndMargin,
ColumnBalanceData& aColData)
{
aColData.Reset();
bool allFit = true;
WritingMode wm = GetWritingMode();
bool isVertical = wm.IsVertical();
bool isRTL = !wm.IsBidiLTR();
bool shrinkingBSizeOnly = !NS_SUBTREE_DIRTY(this) &&
mLastBalanceBSize > aConfig.mColMaxBSize;
#ifdef DEBUG_roc
printf("*** Doing column reflow pass: mLastBalanceBSize=%d, mColMaxBSize=%d, RTL=%d\n"
" mBalanceColCount=%d, mColISize=%d, mColGap=%d\n",
mLastBalanceBSize, aConfig.mColMaxBSize, isRTL, aConfig.mBalanceColCount,
aConfig.mColISize, aConfig.mColGap);
#endif
DrainOverflowColumns();
const bool colBSizeChanged = mLastBalanceBSize != aConfig.mColMaxBSize;
if (colBSizeChanged) {
mLastBalanceBSize = aConfig.mColMaxBSize;
// XXX Seems like this could fire if incremental reflow pushed the column set
// down so we reflow incrementally with a different available height.
// We need a way to do an incremental reflow and be sure availableHeight
// changes are taken account of! Right now I think block frames with absolute
// children might exit early.
//NS_ASSERTION(aKidReason != eReflowReason_Incremental,
// "incremental reflow should not have changed the balance height");
}
// get our border and padding
LogicalMargin borderPadding = aReflowInput.ComputedLogicalBorderPadding();
borderPadding.ApplySkipSides(GetLogicalSkipSides(&aReflowInput));
nsRect contentRect(0, 0, 0, 0);
nsOverflowAreas overflowRects;
nsIFrame* child = mFrames.FirstChild();
LogicalPoint childOrigin(wm, borderPadding.IStart(wm),
borderPadding.BStart(wm));
// In vertical-rl mode, columns will not be correctly placed if the
// reflowInput's ComputedWidth() is UNCONSTRAINED (in which case we'll get
// a containerSize.width of zero here). In that case, the column positions
// will be adjusted later, after our correct contentSize is known.
nsSize containerSize = aReflowInput.ComputedSizeAsContainerIfConstrained();
// For RTL, since the columns might not fill the frame exactly, we
// need to account for the slop. Otherwise we'll waste time moving the
// columns by some tiny amount
// XXX when all of layout is converted to logical coordinates, we
// probably won't need to do this hack any more. For now, we
// confine it to the legacy horizontal-rl case
if (!isVertical && isRTL) {
nscoord availISize = aReflowInput.AvailableISize();
if (aReflowInput.ComputedISize() != NS_INTRINSICSIZE) {
availISize = aReflowInput.ComputedISize();
}
if (availISize != NS_INTRINSICSIZE) {
childOrigin.I(wm) = containerSize.width - borderPadding.Left(wm) -
availISize;
#ifdef DEBUG_roc
printf("*** childOrigin.iCoord = %d\n", childOrigin.I(wm));
#endif
}
}
int columnCount = 0;
int contentBEnd = 0;
bool reflowNext = false;
while (child) {
// Try to skip reflowing the child. We can't skip if the child is dirty. We also can't
// skip if the next column is dirty, because the next column's first line(s)
// might be pullable back to this column. We can't skip if it's the last child
// because we need to obtain the bottom margin. We can't skip
// if this is the last column and we're supposed to assign unbounded
// height to it, because that could change the available height from
// the last time we reflowed it and we should try to pull all the
// content from its next sibling. (Note that it might be the last
// column, but not be the last child because the desired number of columns
// has changed.)
bool skipIncremental = !aReflowInput.ShouldReflowAllKids()
&& !NS_SUBTREE_DIRTY(child)
&& child->GetNextSibling()
&& !(aUnboundedLastColumn && columnCount == aConfig.mBalanceColCount - 1)
&& !NS_SUBTREE_DIRTY(child->GetNextSibling());
// If we need to pull up content from the prev-in-flow then this is not just
// a height shrink. The prev in flow will have set the dirty bit.
// Check the overflow rect YMost instead of just the child's content height. The child
// may have overflowing content that cares about the available height boundary.
// (It may also have overflowing content that doesn't care about the available height
// boundary, but if so, too bad, this optimization is defeated.)
// We want scrollable overflow here since this is a calculation that
// affects layout.
bool skipResizeBSizeShrink = false;
if (shrinkingBSizeOnly) {
switch (wm.GetBlockDir()) {
case WritingMode::eBlockTB:
if (child->GetScrollableOverflowRect().YMost() <= aConfig.mColMaxBSize) {
skipResizeBSizeShrink = true;
}
break;
case WritingMode::eBlockLR:
if (child->GetScrollableOverflowRect().XMost() <= aConfig.mColMaxBSize) {
skipResizeBSizeShrink = true;
}
break;
case WritingMode::eBlockRL:
// XXX not sure how to handle this, so for now just don't attempt
// the optimization
break;
default:
NS_NOTREACHED("unknown block direction");
break;
}
}
nscoord childContentBEnd = 0;
if (!reflowNext && (skipIncremental || skipResizeBSizeShrink)) {
// This child does not need to be reflowed, but we may need to move it
MoveChildTo(child, childOrigin, wm, containerSize);
// If this is the last frame then make sure we get the right status
nsIFrame* kidNext = child->GetNextSibling();
if (kidNext) {
aStatus = (kidNext->GetStateBits() & NS_FRAME_IS_OVERFLOW_CONTAINER)
? NS_FRAME_OVERFLOW_INCOMPLETE
: NS_FRAME_NOT_COMPLETE;
} else {
aStatus = mLastFrameStatus;
}
childContentBEnd = nsLayoutUtils::CalculateContentBEnd(wm, child);
#ifdef DEBUG_roc
printf("*** Skipping child #%d %p (incremental %d, resize block-size shrink %d): status = %d\n",
columnCount, (void*)child, skipIncremental, skipResizeBSizeShrink, aStatus);
#endif
} else {
LogicalSize availSize(wm, aConfig.mColISize, aConfig.mColMaxBSize);
if (aUnboundedLastColumn && columnCount == aConfig.mBalanceColCount - 1) {
availSize.BSize(wm) = GetAvailableContentBSize(aReflowInput);
}
LogicalSize computedSize = aReflowInput.ComputedSize(wm);
if (reflowNext)
child->AddStateBits(NS_FRAME_IS_DIRTY);
LogicalSize kidCBSize(wm, availSize.ISize(wm), computedSize.BSize(wm));
ReflowInput kidReflowInput(PresContext(), aReflowInput, child,
availSize, &kidCBSize);
kidReflowInput.mFlags.mIsTopOfPage = true;
kidReflowInput.mFlags.mTableIsSplittable = false;
kidReflowInput.mFlags.mIsColumnBalancing = aConfig.mBalanceColCount < INT32_MAX;
// We need to reflow any float placeholders, even if our column height
// hasn't changed.
kidReflowInput.mFlags.mMustReflowPlaceholders = !colBSizeChanged;
#ifdef DEBUG_roc
printf("*** Reflowing child #%d %p: availHeight=%d\n",
columnCount, (void*)child,availSize.BSize(wm));
#endif
// Note if the column's next in flow is not being changed by this incremental reflow.
// This may allow the current column to avoid trying to pull lines from the next column.
if (child->GetNextSibling() &&
!(GetStateBits() & NS_FRAME_IS_DIRTY) &&
!(child->GetNextSibling()->GetStateBits() & NS_FRAME_IS_DIRTY)) {
kidReflowInput.mFlags.mNextInFlowUntouched = true;
}
ReflowOutput kidDesiredSize(wm, aDesiredSize.mFlags);
// XXX it would be cool to consult the float manager for the
// previous block to figure out the region of floats from the
// previous column that extend into this column, and subtract
// that region from the new float manager. So you could stick a
// really big float in the first column and text in following
// columns would flow around it.
// Reflow the frame
LogicalPoint origin(wm,
childOrigin.I(wm) +
kidReflowInput.ComputedLogicalMargin().IStart(wm),
childOrigin.B(wm) +
kidReflowInput.ComputedLogicalMargin().BStart(wm));
ReflowChild(child, PresContext(), kidDesiredSize, kidReflowInput,
wm, origin, containerSize, 0, aStatus);
reflowNext = (aStatus & NS_FRAME_REFLOW_NEXTINFLOW) != 0;
#ifdef DEBUG_roc
printf("*** Reflowed child #%d %p: status = %d, desiredSize=%d,%d CarriedOutBEndMargin=%d\n",
columnCount, (void*)child, aStatus, kidDesiredSize.Width(), kidDesiredSize.Height(),
kidDesiredSize.mCarriedOutBEndMargin.get());
#endif
NS_FRAME_TRACE_REFLOW_OUT("Column::Reflow", aStatus);
*aCarriedOutBEndMargin = kidDesiredSize.mCarriedOutBEndMargin;
FinishReflowChild(child, PresContext(), kidDesiredSize,
&kidReflowInput, wm, childOrigin, containerSize, 0);
childContentBEnd = nsLayoutUtils::CalculateContentBEnd(wm, child);
if (childContentBEnd > aConfig.mColMaxBSize) {
allFit = false;
}
if (childContentBEnd > availSize.BSize(wm)) {
aColData.mMaxOverflowingBSize = std::max(childContentBEnd,
aColData.mMaxOverflowingBSize);
}
}
contentRect.UnionRect(contentRect, child->GetRect());
ConsiderChildOverflow(overflowRects, child);
contentBEnd = std::max(contentBEnd, childContentBEnd);
aColData.mLastBSize = childContentBEnd;
aColData.mSumBSize += childContentBEnd;
// Build a continuation column if necessary
nsIFrame* kidNextInFlow = child->GetNextInFlow();
if (NS_FRAME_IS_FULLY_COMPLETE(aStatus) && !NS_FRAME_IS_TRUNCATED(aStatus)) {
NS_ASSERTION(!kidNextInFlow, "next in flow should have been deleted");
child = nullptr;
break;
} else {
++columnCount;
// Make sure that the column has a next-in-flow. If not, we must
// create one to hold the overflowing stuff, even if we're just
// going to put it on our overflow list and let *our*
// next in flow handle it.
if (!kidNextInFlow) {
NS_ASSERTION(aStatus & NS_FRAME_REFLOW_NEXTINFLOW,
"We have to create a continuation, but the block doesn't want us to reflow it?");
// We need to create a continuing column
kidNextInFlow = CreateNextInFlow(child);
}
// Make sure we reflow a next-in-flow when it switches between being
// normal or overflow container
if (NS_FRAME_OVERFLOW_IS_INCOMPLETE(aStatus)) {
if (!(kidNextInFlow->GetStateBits() & NS_FRAME_IS_OVERFLOW_CONTAINER)) {
aStatus |= NS_FRAME_REFLOW_NEXTINFLOW;
reflowNext = true;
kidNextInFlow->AddStateBits(NS_FRAME_IS_OVERFLOW_CONTAINER);
}
}
else if (kidNextInFlow->GetStateBits() & NS_FRAME_IS_OVERFLOW_CONTAINER) {
aStatus |= NS_FRAME_REFLOW_NEXTINFLOW;
reflowNext = true;
kidNextInFlow->RemoveStateBits(NS_FRAME_IS_OVERFLOW_CONTAINER);
}
if ((contentBEnd > aReflowInput.ComputedMaxBSize() ||
contentBEnd > aReflowInput.ComputedBSize()) &&
aConfig.mBalanceColCount < INT32_MAX) {
// We overflowed vertically, but have not exceeded the number of
// columns. We're going to go into overflow columns now, so balancing
// no longer applies.
aColData.mHasExcessBSize = true;
}
if (columnCount >= aConfig.mBalanceColCount) {
// No more columns allowed here. Stop.
aStatus |= NS_FRAME_REFLOW_NEXTINFLOW;
kidNextInFlow->AddStateBits(NS_FRAME_IS_DIRTY);
// Move any of our leftover columns to our overflow list. Our
// next-in-flow will eventually pick them up.
const nsFrameList& continuationColumns = mFrames.RemoveFramesAfter(child);
if (continuationColumns.NotEmpty()) {
SetOverflowFrames(continuationColumns);
}
child = nullptr;
break;
}
}
if (PresContext()->HasPendingInterrupt()) {
// Stop the loop now while |child| still points to the frame that bailed
// out. We could keep going here and condition a bunch of the code in
// this loop on whether there's an interrupt, or even just keep going and
// trying to reflow the blocks (even though we know they'll interrupt
// right after their first line), but stopping now is conceptually the
// simplest (and probably fastest) thing.
break;
}
// Advance to the next column
child = child->GetNextSibling();
if (child) {
childOrigin.I(wm) += aConfig.mColISize + aConfig.mColGap;
#ifdef DEBUG_roc
printf("*** NEXT CHILD ORIGIN.icoord = %d\n", childOrigin.I(wm));
#endif
}
}
if (PresContext()->CheckForInterrupt(this) &&
(GetStateBits() & NS_FRAME_IS_DIRTY)) {
// Mark all our kids starting with |child| dirty
// Note that this is a CheckForInterrupt call, not a HasPendingInterrupt,
// because we might have interrupted while reflowing |child|, and since
// we're about to add a dirty bit to |child| we need to make sure that
// |this| is scheduled to have dirty bits marked on it and its ancestors.
// Otherwise, when we go to mark dirty bits on |child|'s ancestors we'll
// bail out immediately, since it'll already have a dirty bit.
for (; child; child = child->GetNextSibling()) {
child->AddStateBits(NS_FRAME_IS_DIRTY);
}
}
aColData.mMaxBSize = contentBEnd;
LogicalSize contentSize = LogicalSize(wm, contentRect.Size());
contentSize.BSize(wm) = std::max(contentSize.BSize(wm), contentBEnd);
mLastFrameStatus = aStatus;
// Apply computed and min/max values
if (aConfig.mComputedBSize != NS_INTRINSICSIZE) {
if (aReflowInput.AvailableBSize() != NS_INTRINSICSIZE) {
contentSize.BSize(wm) = std::min(contentSize.BSize(wm),
aConfig.mComputedBSize);
} else {
contentSize.BSize(wm) = aConfig.mComputedBSize;
}
} else {
// We add the "consumed" block-size back in so that we're applying
// constraints to the correct bSize value, then subtract it again
// after we've finished with the min/max calculation. This prevents us from
// having a last continuation that is smaller than the min bSize. but which
// has prev-in-flows, trigger a larger bSize than actually required.
contentSize.BSize(wm) =
aReflowInput.ApplyMinMaxBSize(contentSize.BSize(wm),
aConfig.mConsumedBSize);
}
if (aReflowInput.ComputedISize() != NS_INTRINSICSIZE) {
contentSize.ISize(wm) = aReflowInput.ComputedISize();
} else {
contentSize.ISize(wm) =
aReflowInput.ApplyMinMaxISize(contentSize.ISize(wm));
}
contentSize.ISize(wm) += borderPadding.IStartEnd(wm);
contentSize.BSize(wm) += borderPadding.BStartEnd(wm);
aDesiredSize.SetSize(wm, contentSize);
aDesiredSize.mOverflowAreas = overflowRects;
aDesiredSize.UnionOverflowAreasWithDesiredBounds();
// In vertical-rl mode, make a second pass if necessary to reposition the
// columns with the correct container width. (In other writing modes,
// correct containerSize was not required for column positioning so we don't
// need this fixup.)
if (wm.IsVerticalRL() && containerSize.width != contentSize.Width(wm)) {
const nsSize finalContainerSize = aDesiredSize.PhysicalSize();
for (nsIFrame* child : mFrames) {
// Get the logical position as set previously using a provisional or
// dummy containerSize, and reset with the correct container size.
child->SetPosition(wm, child->GetLogicalPosition(wm, containerSize),
finalContainerSize);
}
}
#ifdef DEBUG_roc
printf("*** DONE PASS feasible=%d\n", allFit && NS_FRAME_IS_FULLY_COMPLETE(aStatus)
&& !NS_FRAME_IS_TRUNCATED(aStatus));
#endif
return allFit && NS_FRAME_IS_FULLY_COMPLETE(aStatus)
&& !NS_FRAME_IS_TRUNCATED(aStatus);
}
void
nsInlineFrame::ReflowFrames(nsPresContext* aPresContext,
const ReflowInput& aReflowInput,
InlineReflowInput& irs,
ReflowOutput& aMetrics,
nsReflowStatus& aStatus)
{
MOZ_ASSERT(aStatus.IsEmpty(), "Caller should pass a fresh reflow status!");
nsLineLayout* lineLayout = aReflowInput.mLineLayout;
bool inFirstLine = aReflowInput.mLineLayout->GetInFirstLine();
RestyleManager* restyleManager = aPresContext->RestyleManager();
WritingMode frameWM = aReflowInput.GetWritingMode();
WritingMode lineWM = aReflowInput.mLineLayout->mRootSpan->mWritingMode;
LogicalMargin framePadding = aReflowInput.ComputedLogicalBorderPadding();
nscoord startEdge = 0;
const bool boxDecorationBreakClone =
MOZ_UNLIKELY(StyleBorder()->mBoxDecorationBreak ==
StyleBoxDecorationBreak::Clone);
// Don't offset by our start borderpadding if we have a prev continuation or
// if we're in a part of an {ib} split other than the first one. For
// box-decoration-break:clone we always offset our start since all
// continuations have border/padding.
if ((!GetPrevContinuation() && !FrameIsNonFirstInIBSplit()) ||
boxDecorationBreakClone) {
startEdge = framePadding.IStart(frameWM);
}
nscoord availableISize = aReflowInput.AvailableISize();
NS_ASSERTION(availableISize != NS_UNCONSTRAINEDSIZE,
"should no longer use available widths");
// Subtract off inline axis border+padding from availableISize
availableISize -= startEdge;
availableISize -= framePadding.IEnd(frameWM);
lineLayout->BeginSpan(this, &aReflowInput, startEdge,
startEdge + availableISize, &mBaseline);
// First reflow our principal children.
nsIFrame* frame = mFrames.FirstChild();
bool done = false;
while (frame) {
// Check if we should lazily set the child frame's parent pointer.
if (irs.mSetParentPointer) {
nsIFrame* child = frame;
do {
child->SetParent(this);
if (inFirstLine) {
restyleManager->ReparentStyleContext(child);
nsLayoutUtils::MarkDescendantsDirty(child);
}
// We also need to do the same for |frame|'s next-in-flows that are in
// the sibling list. Otherwise, if we reflow |frame| and it's complete
// we'll crash when trying to delete its next-in-flow.
// This scenario doesn't happen often, but it can happen.
nsIFrame* nextSibling = child->GetNextSibling();
child = child->GetNextInFlow();
if (MOZ_UNLIKELY(child)) {
while (child != nextSibling && nextSibling) {
nextSibling = nextSibling->GetNextSibling();
}
if (!nextSibling) {
child = nullptr;
}
}
MOZ_ASSERT(!child || mFrames.ContainsFrame(child));
} while (child);
// Fix the parent pointer for ::first-letter child frame next-in-flows,
// so nsFirstLetterFrame::Reflow can destroy them safely (bug 401042).
nsIFrame* realFrame = nsPlaceholderFrame::GetRealFrameFor(frame);
if (realFrame->IsLetterFrame()) {
nsIFrame* child = realFrame->PrincipalChildList().FirstChild();
if (child) {
NS_ASSERTION(child->IsTextFrame(), "unexpected frame type");
nsIFrame* nextInFlow = child->GetNextInFlow();
for ( ; nextInFlow; nextInFlow = nextInFlow->GetNextInFlow()) {
NS_ASSERTION(nextInFlow->IsTextFrame(), "unexpected frame type");
if (mFrames.ContainsFrame(nextInFlow)) {
nextInFlow->SetParent(this);
if (inFirstLine) {
restyleManager->ReparentStyleContext(nextInFlow);
nsLayoutUtils::MarkDescendantsDirty(nextInFlow);
}
}
else {
#ifdef DEBUG
// Once we find a next-in-flow that isn't ours none of the
// remaining next-in-flows should be either.
for ( ; nextInFlow; nextInFlow = nextInFlow->GetNextInFlow()) {
NS_ASSERTION(!mFrames.ContainsFrame(nextInFlow),
"unexpected letter frame flow");
}
#endif
break;
}
}
}
}
}
MOZ_ASSERT(frame->GetParent() == this);
if (!done) {
bool reflowingFirstLetter = lineLayout->GetFirstLetterStyleOK();
ReflowInlineFrame(aPresContext, aReflowInput, irs, frame, aStatus);
done = aStatus.IsInlineBreak() ||
(!reflowingFirstLetter && aStatus.IsIncomplete());
if (done) {
if (!irs.mSetParentPointer) {
break;
}
// Keep reparenting the remaining siblings, but don't reflow them.
nsFrameList* pushedFrames = GetOverflowFrames();
if (pushedFrames && pushedFrames->FirstChild() == frame) {
// Don't bother if |frame| was pushed to our overflow list.
break;
}
} else {
irs.mPrevFrame = frame;
}
}
frame = frame->GetNextSibling();
}
// Attempt to pull frames from our next-in-flow until we can't
if (!done && GetNextInFlow()) {
while (true) {
bool reflowingFirstLetter = lineLayout->GetFirstLetterStyleOK();
bool isComplete;
if (!frame) { // Could be non-null if we pulled a first-letter frame and
// it created a continuation, since we don't push those.
frame = PullOneFrame(aPresContext, irs, &isComplete);
}
#ifdef NOISY_PUSHING
printf("%p pulled up %p\n", this, frame);
#endif
if (nullptr == frame) {
if (!isComplete) {
aStatus.Reset();
aStatus.SetIncomplete();
}
break;
}
ReflowInlineFrame(aPresContext, aReflowInput, irs, frame, aStatus);
if (aStatus.IsInlineBreak() ||
(!reflowingFirstLetter && aStatus.IsIncomplete())) {
break;
}
irs.mPrevFrame = frame;
frame = frame->GetNextSibling();
}
}
NS_ASSERTION(!aStatus.IsComplete() || !GetOverflowFrames(),
"We can't be complete AND have overflow frames!");
// If after reflowing our children they take up no area then make
// sure that we don't either.
//
// Note: CSS demands that empty inline elements still affect the
// line-height calculations. However, continuations of an inline
// that are empty we force to empty so that things like collapsed
// whitespace in an inline element don't affect the line-height.
aMetrics.ISize(lineWM) = lineLayout->EndSpan(this);
// Compute final width.
// XXX Note that that the padding start and end are in the frame's
// writing mode, but the metrics' inline-size is in the line's
// writing mode. This makes sense if the line and frame are both
// vertical or both horizontal, but what should happen with
// orthogonal inlines?
// Make sure to not include our start border and padding if we have a prev
// continuation or if we're in a part of an {ib} split other than the first
// one. For box-decoration-break:clone we always include our start border
// and padding since all continuations have them.
if ((!GetPrevContinuation() && !FrameIsNonFirstInIBSplit()) ||
boxDecorationBreakClone) {
aMetrics.ISize(lineWM) += framePadding.IStart(frameWM);
}
/*
* We want to only apply the end border and padding if we're the last
* continuation and either not in an {ib} split or the last part of it. To
* be the last continuation we have to be complete (so that we won't get a
* next-in-flow) and have no non-fluid continuations on our continuation
* chain. For box-decoration-break:clone we always apply the end border and
* padding since all continuations have them.
*/
if ((aStatus.IsComplete() &&
!LastInFlow()->GetNextContinuation() &&
!FrameIsNonLastInIBSplit()) ||
boxDecorationBreakClone) {
aMetrics.ISize(lineWM) += framePadding.IEnd(frameWM);
}
nsLayoutUtils::SetBSizeFromFontMetrics(this, aMetrics,
framePadding, lineWM, frameWM);
// For now our overflow area is zero. The real value will be
// computed in |nsLineLayout::RelativePositionFrames|.
aMetrics.mOverflowAreas.Clear();
#ifdef NOISY_FINAL_SIZE
ListTag(stdout);
printf(": metrics=%d,%d ascent=%d\n",
aMetrics.Width(), aMetrics.Height(), aMetrics.TopAscent());
#endif
}
void
ViewportFrame::Reflow(nsPresContext* aPresContext,
ReflowOutput& aDesiredSize,
const ReflowInput& aReflowInput,
nsReflowStatus& aStatus)
{
MarkInReflow();
DO_GLOBAL_REFLOW_COUNT("ViewportFrame");
DISPLAY_REFLOW(aPresContext, this, aReflowInput, aDesiredSize, aStatus);
NS_FRAME_TRACE_REFLOW_IN("ViewportFrame::Reflow");
// Initialize OUT parameters
aStatus = NS_FRAME_COMPLETE;
// Because |Reflow| sets ComputedBSize() on the child to our
// ComputedBSize().
AddStateBits(NS_FRAME_CONTAINS_RELATIVE_BSIZE);
// Set our size up front, since some parts of reflow depend on it
// being already set. Note that the computed height may be
// unconstrained; that's ok. Consumers should watch out for that.
SetSize(nsSize(aReflowInput.ComputedWidth(), aReflowInput.ComputedHeight()));
// Reflow the main content first so that the placeholders of the
// fixed-position frames will be in the right places on an initial
// reflow.
nscoord kidBSize = 0;
WritingMode wm = aReflowInput.GetWritingMode();
if (mFrames.NotEmpty()) {
// Deal with a non-incremental reflow or an incremental reflow
// targeted at our one-and-only principal child frame.
if (aReflowInput.ShouldReflowAllKids() ||
aReflowInput.IsBResize() ||
NS_SUBTREE_DIRTY(mFrames.FirstChild())) {
// Reflow our one-and-only principal child frame
nsIFrame* kidFrame = mFrames.FirstChild();
ReflowOutput kidDesiredSize(aReflowInput);
WritingMode wm = kidFrame->GetWritingMode();
LogicalSize availableSpace = aReflowInput.AvailableSize(wm);
ReflowInput kidReflowInput(aPresContext, aReflowInput,
kidFrame, availableSpace);
// Reflow the frame
kidReflowInput.SetComputedBSize(aReflowInput.ComputedBSize());
ReflowChild(kidFrame, aPresContext, kidDesiredSize, kidReflowInput,
0, 0, 0, aStatus);
kidBSize = kidDesiredSize.BSize(wm);
FinishReflowChild(kidFrame, aPresContext, kidDesiredSize, nullptr, 0, 0, 0);
} else {
kidBSize = LogicalSize(wm, mFrames.FirstChild()->GetSize()).BSize(wm);
}
}
NS_ASSERTION(aReflowInput.AvailableISize() != NS_UNCONSTRAINEDSIZE,
"shouldn't happen anymore");
// Return the max size as our desired size
LogicalSize maxSize(wm, aReflowInput.AvailableISize(),
// Being flowed initially at an unconstrained block size
// means we should return our child's intrinsic size.
aReflowInput.ComputedBSize() != NS_UNCONSTRAINEDSIZE
? aReflowInput.ComputedBSize()
: kidBSize);
aDesiredSize.SetSize(wm, maxSize);
aDesiredSize.SetOverflowAreasToDesiredBounds();
if (HasAbsolutelyPositionedChildren()) {
// Make a copy of the reflow state and change the computed width and height
// to reflect the available space for the fixed items
ReflowInput reflowInput(aReflowInput);
if (reflowInput.AvailableBSize() == NS_UNCONSTRAINEDSIZE) {
// We have an intrinsic-height document with abs-pos/fixed-pos children.
// Set the available height and mComputedHeight to our chosen height.
reflowInput.AvailableBSize() = maxSize.BSize(wm);
// Not having border/padding simplifies things
NS_ASSERTION(reflowInput.ComputedPhysicalBorderPadding() == nsMargin(0,0,0,0),
"Viewports can't have border/padding");
reflowInput.SetComputedBSize(maxSize.BSize(wm));
}
nsRect rect = AdjustReflowInputAsContainingBlock(&reflowInput);
nsOverflowAreas* overflowAreas = &aDesiredSize.mOverflowAreas;
nsIScrollableFrame* rootScrollFrame =
aPresContext->PresShell()->GetRootScrollFrameAsScrollable();
if (rootScrollFrame && !rootScrollFrame->IsIgnoringViewportClipping()) {
overflowAreas = nullptr;
}
AbsPosReflowFlags flags =
AbsPosReflowFlags::eCBWidthAndHeightChanged; // XXX could be optimized
GetAbsoluteContainingBlock()->Reflow(this, aPresContext, reflowInput, aStatus,
rect, flags, overflowAreas);
}
if (mFrames.NotEmpty()) {
ConsiderChildOverflow(aDesiredSize.mOverflowAreas, mFrames.FirstChild());
}
// If we were dirty then do a repaint
if (GetStateBits() & NS_FRAME_IS_DIRTY) {
InvalidateFrame();
}
// Clipping is handled by the document container (e.g., nsSubDocumentFrame),
// so we don't need to change our overflow areas.
bool overflowChanged = FinishAndStoreOverflow(&aDesiredSize);
if (overflowChanged) {
// We may need to alert our container to get it to pick up the
// overflow change.
nsSubDocumentFrame* container = static_cast<nsSubDocumentFrame*>
(nsLayoutUtils::GetCrossDocParentFrame(this));
if (container && !container->ShouldClipSubdocument()) {
container->PresContext()->PresShell()->
FrameNeedsReflow(container, nsIPresShell::eResize, NS_FRAME_IS_DIRTY);
}
}
NS_FRAME_TRACE_REFLOW_OUT("ViewportFrame::Reflow", aStatus);
NS_FRAME_SET_TRUNCATION(aStatus, aReflowInput, aDesiredSize);
}
void
nsNumberControlFrame::Reflow(nsPresContext* aPresContext,
ReflowOutput& aDesiredSize,
const ReflowInput& aReflowInput,
nsReflowStatus& aStatus)
{
MarkInReflow();
DO_GLOBAL_REFLOW_COUNT("nsNumberControlFrame");
DISPLAY_REFLOW(aPresContext, this, aReflowInput, aDesiredSize, aStatus);
NS_ASSERTION(mOuterWrapper, "Outer wrapper div must exist!");
NS_ASSERTION(!GetPrevContinuation() && !GetNextContinuation(),
"nsNumberControlFrame should not have continuations; if it does we "
"need to call RegUnregAccessKey only for the first");
NS_ASSERTION(!mFrames.FirstChild() ||
!mFrames.FirstChild()->GetNextSibling(),
"We expect at most one direct child frame");
if (mState & NS_FRAME_FIRST_REFLOW) {
nsFormControlFrame::RegUnRegAccessKey(this, true);
}
const WritingMode myWM = aReflowInput.GetWritingMode();
// The ISize of our content box, which is the available ISize
// for our anonymous content:
const nscoord contentBoxISize = aReflowInput.ComputedISize();
nscoord contentBoxBSize = aReflowInput.ComputedBSize();
// Figure out our border-box sizes as well (by adding borderPadding to
// content-box sizes):
const nscoord borderBoxISize = contentBoxISize +
aReflowInput.ComputedLogicalBorderPadding().IStartEnd(myWM);
nscoord borderBoxBSize;
if (contentBoxBSize != NS_INTRINSICSIZE) {
borderBoxBSize = contentBoxBSize +
aReflowInput.ComputedLogicalBorderPadding().BStartEnd(myWM);
} // else, we'll figure out borderBoxBSize after we resolve contentBoxBSize.
nsIFrame* outerWrapperFrame = mOuterWrapper->GetPrimaryFrame();
if (!outerWrapperFrame) { // display:none?
if (contentBoxBSize == NS_INTRINSICSIZE) {
contentBoxBSize = 0;
borderBoxBSize =
aReflowInput.ComputedLogicalBorderPadding().BStartEnd(myWM);
}
} else {
NS_ASSERTION(outerWrapperFrame == mFrames.FirstChild(), "huh?");
ReflowOutput wrappersDesiredSize(aReflowInput);
WritingMode wrapperWM = outerWrapperFrame->GetWritingMode();
LogicalSize availSize = aReflowInput.ComputedSize(wrapperWM);
availSize.BSize(wrapperWM) = NS_UNCONSTRAINEDSIZE;
ReflowInput wrapperReflowInput(aPresContext, aReflowInput,
outerWrapperFrame, availSize);
// Convert wrapper margin into my own writing-mode (in case it differs):
LogicalMargin wrapperMargin =
wrapperReflowInput.ComputedLogicalMargin().ConvertTo(myWM, wrapperWM);
// offsets of wrapper frame within this frame:
LogicalPoint
wrapperOffset(myWM,
aReflowInput.ComputedLogicalBorderPadding().IStart(myWM) +
wrapperMargin.IStart(myWM),
aReflowInput.ComputedLogicalBorderPadding().BStart(myWM) +
wrapperMargin.BStart(myWM));
nsReflowStatus childStatus;
// We initially reflow the child with a dummy containerSize; positioning
// will be fixed later.
const nsSize dummyContainerSize;
ReflowChild(outerWrapperFrame, aPresContext, wrappersDesiredSize,
wrapperReflowInput, myWM, wrapperOffset, dummyContainerSize, 0,
childStatus);
MOZ_ASSERT(NS_FRAME_IS_FULLY_COMPLETE(childStatus),
"We gave our child unconstrained available block-size, "
"so it should be complete");
nscoord wrappersMarginBoxBSize =
wrappersDesiredSize.BSize(myWM) + wrapperMargin.BStartEnd(myWM);
if (contentBoxBSize == NS_INTRINSICSIZE) {
// We are intrinsically sized -- we should shrinkwrap the outer wrapper's
// block-size:
contentBoxBSize = wrappersMarginBoxBSize;
// Make sure we obey min/max-bsize in the case when we're doing intrinsic
// sizing (we get it for free when we have a non-intrinsic
// aReflowInput.ComputedBSize()). Note that we do this before
// adjusting for borderpadding, since ComputedMaxBSize and
// ComputedMinBSize are content heights.
contentBoxBSize =
NS_CSS_MINMAX(contentBoxBSize,
aReflowInput.ComputedMinBSize(),
aReflowInput.ComputedMaxBSize());
borderBoxBSize = contentBoxBSize +
aReflowInput.ComputedLogicalBorderPadding().BStartEnd(myWM);
}
// Center child in block axis
nscoord extraSpace = contentBoxBSize - wrappersMarginBoxBSize;
wrapperOffset.B(myWM) += std::max(0, extraSpace / 2);
// Needed in FinishReflowChild, for logical-to-physical conversion:
nsSize borderBoxSize = LogicalSize(myWM, borderBoxISize, borderBoxBSize).
GetPhysicalSize(myWM);
// Place the child
FinishReflowChild(outerWrapperFrame, aPresContext, wrappersDesiredSize,
&wrapperReflowInput, myWM, wrapperOffset,
borderBoxSize, 0);
nsSize contentBoxSize =
LogicalSize(myWM, contentBoxISize, contentBoxBSize).
GetPhysicalSize(myWM);
aDesiredSize.SetBlockStartAscent(
wrappersDesiredSize.BlockStartAscent() +
outerWrapperFrame->BStart(aReflowInput.GetWritingMode(),
contentBoxSize));
}
LogicalSize logicalDesiredSize(myWM, borderBoxISize, borderBoxBSize);
aDesiredSize.SetSize(myWM, logicalDesiredSize);
aDesiredSize.SetOverflowAreasToDesiredBounds();
if (outerWrapperFrame) {
ConsiderChildOverflow(aDesiredSize.mOverflowAreas, outerWrapperFrame);
}
FinishAndStoreOverflow(&aDesiredSize);
aStatus = NS_FRAME_COMPLETE;
NS_FRAME_SET_TRUNCATION(aStatus, aReflowInput, aDesiredSize);
}
/*
* Note: we largely position/size out our children (page frames) using
* \*physical\* x/y/width/height values, because the print preview UI is always
* arranged in the same orientation, regardless of writing mode.
*/
void
nsSimplePageSequenceFrame::Reflow(nsPresContext* aPresContext,
ReflowOutput& aDesiredSize,
const ReflowInput& aReflowInput,
nsReflowStatus& aStatus)
{
MarkInReflow();
NS_PRECONDITION(aPresContext->IsRootPaginatedDocument(),
"A Page Sequence is only for real pages");
DO_GLOBAL_REFLOW_COUNT("nsSimplePageSequenceFrame");
DISPLAY_REFLOW(aPresContext, this, aReflowInput, aDesiredSize, aStatus);
MOZ_ASSERT(aStatus.IsEmpty(), "Caller should pass a fresh reflow status!");
NS_FRAME_TRACE_REFLOW_IN("nsSimplePageSequenceFrame::Reflow");
// Don't do incremental reflow until we've taught tables how to do
// it right in paginated mode.
if (!(GetStateBits() & NS_FRAME_FIRST_REFLOW)) {
// Return our desired size
SetDesiredSize(aDesiredSize, aReflowInput, mSize.width, mSize.height);
aDesiredSize.SetOverflowAreasToDesiredBounds();
FinishAndStoreOverflow(&aDesiredSize);
if (GetRect().Width() != aDesiredSize.Width()) {
// Our width is changing; we need to re-center our children (our pages).
for (nsFrameList::Enumerator e(mFrames); !e.AtEnd(); e.Next()) {
nsIFrame* child = e.get();
nsMargin pageCSSMargin = child->GetUsedMargin();
nscoord centeringMargin =
ComputeCenteringMargin(aReflowInput.ComputedWidth(),
child->GetRect().Width(),
pageCSSMargin);
nscoord newX = pageCSSMargin.left + centeringMargin;
// Adjust the child's x-position:
child->MovePositionBy(nsPoint(newX - child->GetNormalPosition().x, 0));
}
}
return;
}
// See if we can get a Print Settings from the Context
if (!mPageData->mPrintSettings &&
aPresContext->Medium() == nsGkAtoms::print) {
mPageData->mPrintSettings = aPresContext->GetPrintSettings();
}
// now get out margins & edges
if (mPageData->mPrintSettings) {
nsIntMargin unwriteableTwips;
mPageData->mPrintSettings->GetUnwriteableMarginInTwips(unwriteableTwips);
NS_ASSERTION(unwriteableTwips.left >= 0 && unwriteableTwips.top >= 0 &&
unwriteableTwips.right >= 0 && unwriteableTwips.bottom >= 0,
"Unwriteable twips should be non-negative");
nsIntMargin marginTwips;
mPageData->mPrintSettings->GetMarginInTwips(marginTwips);
mMargin = aPresContext->CSSTwipsToAppUnits(marginTwips + unwriteableTwips);
int16_t printType;
mPageData->mPrintSettings->GetPrintRange(&printType);
mPrintRangeType = printType;
nsIntMargin edgeTwips;
mPageData->mPrintSettings->GetEdgeInTwips(edgeTwips);
// sanity check the values. three inches are sometimes needed
int32_t inchInTwips = NS_INCHES_TO_INT_TWIPS(3.0);
edgeTwips.top = clamped(edgeTwips.top, 0, inchInTwips);
edgeTwips.bottom = clamped(edgeTwips.bottom, 0, inchInTwips);
edgeTwips.left = clamped(edgeTwips.left, 0, inchInTwips);
edgeTwips.right = clamped(edgeTwips.right, 0, inchInTwips);
mPageData->mEdgePaperMargin =
aPresContext->CSSTwipsToAppUnits(edgeTwips + unwriteableTwips);
}
// *** Special Override ***
// If this is a sub-sdoc (meaning it doesn't take the whole page)
// and if this Document is in the upper left hand corner
// we need to suppress the top margin or it will reflow too small
nsSize pageSize = aPresContext->GetPageSize();
mPageData->mReflowSize = pageSize;
mPageData->mReflowMargin = mMargin;
// We use the CSS "margin" property on the -moz-page pseudoelement
// to determine the space between each page in print preview.
// Keep a running y-offset for each page.
nscoord y = 0;
nscoord maxXMost = 0;
// Tile the pages vertically
ReflowOutput kidSize(aReflowInput);
for (nsFrameList::Enumerator e(mFrames); !e.AtEnd(); e.Next()) {
nsIFrame* kidFrame = e.get();
// Set the shared data into the page frame before reflow
nsPageFrame * pf = static_cast<nsPageFrame*>(kidFrame);
pf->SetSharedPageData(mPageData);
// Reflow the page
ReflowInput kidReflowInput(aPresContext, aReflowInput, kidFrame,
LogicalSize(kidFrame->GetWritingMode(),
pageSize));
nsReflowStatus status;
kidReflowInput.SetComputedISize(kidReflowInput.AvailableISize());
//kidReflowInput.SetComputedHeight(kidReflowInput.AvailableHeight());
PR_PL(("AV ISize: %d BSize: %d\n",
kidReflowInput.AvailableISize(),
kidReflowInput.AvailableBSize()));
nsMargin pageCSSMargin = kidReflowInput.ComputedPhysicalMargin();
y += pageCSSMargin.top;
nscoord x = pageCSSMargin.left;
// Place and size the page.
ReflowChild(kidFrame, aPresContext, kidSize, kidReflowInput, x, y, 0, status);
// If the page is narrower than our width, then center it horizontally:
x += ComputeCenteringMargin(aReflowInput.ComputedWidth(),
kidSize.Width(), pageCSSMargin);
FinishReflowChild(kidFrame, aPresContext, kidSize, nullptr, x, y, 0);
y += kidSize.Height();
y += pageCSSMargin.bottom;
maxXMost = std::max(maxXMost, x + kidSize.Width() + pageCSSMargin.right);
// Is the page complete?
nsIFrame* kidNextInFlow = kidFrame->GetNextInFlow();
if (status.IsFullyComplete()) {
NS_ASSERTION(!kidNextInFlow, "bad child flow list");
} else if (!kidNextInFlow) {
// The page isn't complete and it doesn't have a next-in-flow, so
// create a continuing page.
nsIFrame* continuingPage = aPresContext->PresShell()->FrameConstructor()->
CreateContinuingFrame(aPresContext, kidFrame, this);
// Add it to our child list
mFrames.InsertFrame(nullptr, kidFrame, continuingPage);
}
}
// Get Total Page Count
// XXXdholbert technically we could calculate this in the loop above,
// instead of needing a separate walk.
int32_t pageTot = mFrames.GetLength();
// Set Page Number Info
int32_t pageNum = 1;
for (nsFrameList::Enumerator e(mFrames); !e.AtEnd(); e.Next()) {
MOZ_ASSERT(e.get()->IsPageFrame(),
"only expecting nsPageFrame children. Other children will make "
"this static_cast bogus & probably violate other assumptions");
nsPageFrame* pf = static_cast<nsPageFrame*>(e.get());
pf->SetPageNumInfo(pageNum, pageTot);
pageNum++;
}
nsAutoString formattedDateString;
PRTime now = PR_Now();
if (NS_SUCCEEDED(DateTimeFormat::FormatPRTime(kDateFormatShort,
kTimeFormatNoSeconds,
now,
formattedDateString))) {
SetDateTimeStr(formattedDateString);
}
// Return our desired size
// Adjust the reflow size by PrintPreviewScale so the scrollbars end up the
// correct size
SetDesiredSize(aDesiredSize, aReflowInput, maxXMost, y);
aDesiredSize.SetOverflowAreasToDesiredBounds();
FinishAndStoreOverflow(&aDesiredSize);
// cache the size so we can set the desired size
// for the other reflows that happen
mSize.width = maxXMost;
mSize.height = y;
NS_FRAME_TRACE_REFLOW_OUT("nsSimplePageSequeceFrame::Reflow", aStatus);
NS_FRAME_SET_TRUNCATION(aStatus, aReflowInput, aDesiredSize);
}
/* virtual */ nsresult
nsMathMLmpaddedFrame::Place(DrawTarget* aDrawTarget,
bool aPlaceOrigin,
ReflowOutput& aDesiredSize)
{
nsresult rv =
nsMathMLContainerFrame::Place(aDrawTarget, false, aDesiredSize);
if (NS_MATHML_HAS_ERROR(mPresentationData.flags) || NS_FAILED(rv)) {
DidReflowChildren(PrincipalChildList().FirstChild());
return rv;
}
nscoord height = aDesiredSize.BlockStartAscent();
nscoord depth = aDesiredSize.Height() - aDesiredSize.BlockStartAscent();
// The REC says:
//
// "The lspace attribute ('leading' space) specifies the horizontal location
// of the positioning point of the child content with respect to the
// positioning point of the mpadded element. By default they coincide, and
// therefore absolute values for lspace have the same effect as relative
// values."
//
// "MathML renderers should ensure that, except for the effects of the
// attributes, the relative spacing between the contents of the mpadded
// element and surrounding MathML elements would not be modified by replacing
// an mpadded element with an mrow element with the same content, even if
// linebreaking occurs within the mpadded element."
//
// (http://www.w3.org/TR/MathML/chapter3.html#presm.mpadded)
//
// "In those discussions, the terms leading and trailing are used to specify
// a side of an object when which side to use depends on the directionality;
// ie. leading means left in LTR but right in RTL."
// (http://www.w3.org/TR/MathML/chapter3.html#presm.bidi.math)
nscoord lspace = 0;
// In MathML3, "width" will be the bounding box width and "advancewidth" will
// refer "to the horizontal distance between the positioning point of the
// mpadded and the positioning point for the following content". MathML2
// doesn't make the distinction.
nscoord width = aDesiredSize.Width();
nscoord voffset = 0;
int32_t pseudoUnit;
nscoord initialWidth = width;
float fontSizeInflation = nsLayoutUtils::FontSizeInflationFor(this);
// update width
pseudoUnit = (mWidthPseudoUnit == NS_MATHML_PSEUDO_UNIT_ITSELF)
? NS_MATHML_PSEUDO_UNIT_WIDTH : mWidthPseudoUnit;
UpdateValue(mWidthSign, pseudoUnit, mWidth,
aDesiredSize, width, fontSizeInflation);
width = std::max(0, width);
// update "height" (this is the ascent in the terminology of the REC)
pseudoUnit = (mHeightPseudoUnit == NS_MATHML_PSEUDO_UNIT_ITSELF)
? NS_MATHML_PSEUDO_UNIT_HEIGHT : mHeightPseudoUnit;
UpdateValue(mHeightSign, pseudoUnit, mHeight,
aDesiredSize, height, fontSizeInflation);
height = std::max(0, height);
// update "depth" (this is the descent in the terminology of the REC)
pseudoUnit = (mDepthPseudoUnit == NS_MATHML_PSEUDO_UNIT_ITSELF)
? NS_MATHML_PSEUDO_UNIT_DEPTH : mDepthPseudoUnit;
UpdateValue(mDepthSign, pseudoUnit, mDepth,
aDesiredSize, depth, fontSizeInflation);
depth = std::max(0, depth);
// update lspace
if (mLeadingSpacePseudoUnit != NS_MATHML_PSEUDO_UNIT_ITSELF) {
pseudoUnit = mLeadingSpacePseudoUnit;
UpdateValue(mLeadingSpaceSign, pseudoUnit, mLeadingSpace,
aDesiredSize, lspace, fontSizeInflation);
}
// update voffset
if (mVerticalOffsetPseudoUnit != NS_MATHML_PSEUDO_UNIT_ITSELF) {
pseudoUnit = mVerticalOffsetPseudoUnit;
UpdateValue(mVerticalOffsetSign, pseudoUnit, mVerticalOffset,
aDesiredSize, voffset, fontSizeInflation);
}
// do the padding now that we have everything
// The idea here is to maintain the invariant that <mpadded>...</mpadded> (i.e.,
// with no attributes) looks the same as <mrow>...</mrow>. But when there are
// attributes, tweak our metrics and move children to achieve the desired visual
// effects.
if ((StyleVisibility()->mDirection ?
mWidthSign : mLeadingSpaceSign) != NS_MATHML_SIGN_INVALID) {
// there was padding on the left. dismiss the left italic correction now
// (so that our parent won't correct us)
mBoundingMetrics.leftBearing = 0;
}
if ((StyleVisibility()->mDirection ?
mLeadingSpaceSign : mWidthSign) != NS_MATHML_SIGN_INVALID) {
// there was padding on the right. dismiss the right italic correction now
// (so that our parent won't correct us)
mBoundingMetrics.width = width;
mBoundingMetrics.rightBearing = mBoundingMetrics.width;
}
nscoord dx = (StyleVisibility()->mDirection ?
width - initialWidth - lspace : lspace);
aDesiredSize.SetBlockStartAscent(height);
aDesiredSize.Width() = mBoundingMetrics.width;
aDesiredSize.Height() = depth + aDesiredSize.BlockStartAscent();
mBoundingMetrics.ascent = height;
mBoundingMetrics.descent = depth;
aDesiredSize.mBoundingMetrics = mBoundingMetrics;
mReference.x = 0;
mReference.y = aDesiredSize.BlockStartAscent();
if (aPlaceOrigin) {
// Finish reflowing child frames, positioning their origins.
PositionRowChildFrames(dx, aDesiredSize.BlockStartAscent() - voffset);
}
return NS_OK;
}
void
nsFirstLetterFrame::Reflow(nsPresContext* aPresContext,
ReflowOutput& aMetrics,
const ReflowInput& aReflowInput,
nsReflowStatus& aReflowStatus)
{
MarkInReflow();
DO_GLOBAL_REFLOW_COUNT("nsFirstLetterFrame");
DISPLAY_REFLOW(aPresContext, this, aReflowInput, aMetrics, aReflowStatus);
// Grab overflow list
DrainOverflowFrames(aPresContext);
nsIFrame* kid = mFrames.FirstChild();
// Setup reflow state for our child
WritingMode wm = aReflowInput.GetWritingMode();
LogicalSize availSize = aReflowInput.AvailableSize();
const LogicalMargin& bp = aReflowInput.ComputedLogicalBorderPadding();
NS_ASSERTION(availSize.ISize(wm) != NS_UNCONSTRAINEDSIZE,
"should no longer use unconstrained inline size");
availSize.ISize(wm) -= bp.IStartEnd(wm);
if (NS_UNCONSTRAINEDSIZE != availSize.BSize(wm)) {
availSize.BSize(wm) -= bp.BStartEnd(wm);
}
WritingMode lineWM = aMetrics.GetWritingMode();
ReflowOutput kidMetrics(lineWM);
// Reflow the child
if (!aReflowInput.mLineLayout) {
// When there is no lineLayout provided, we provide our own. The
// only time that the first-letter-frame is not reflowing in a
// line context is when its floating.
WritingMode kidWritingMode = WritingModeForLine(wm, kid);
LogicalSize kidAvailSize = availSize.ConvertTo(kidWritingMode, wm);
ReflowInput rs(aPresContext, aReflowInput, kid, kidAvailSize);
nsLineLayout ll(aPresContext, nullptr, &aReflowInput, nullptr, nullptr);
ll.BeginLineReflow(bp.IStart(wm), bp.BStart(wm),
availSize.ISize(wm), NS_UNCONSTRAINEDSIZE,
false, true, kidWritingMode,
nsSize(aReflowInput.AvailableWidth(),
aReflowInput.AvailableHeight()));
rs.mLineLayout = ≪
ll.SetInFirstLetter(true);
ll.SetFirstLetterStyleOK(true);
kid->Reflow(aPresContext, kidMetrics, rs, aReflowStatus);
ll.EndLineReflow();
ll.SetInFirstLetter(false);
// In the floating first-letter case, we need to set this ourselves;
// nsLineLayout::BeginSpan will set it in the other case
mBaseline = kidMetrics.BlockStartAscent();
// Place and size the child and update the output metrics
LogicalSize convertedSize = kidMetrics.Size(lineWM).ConvertTo(wm, lineWM);
kid->SetRect(nsRect(bp.IStart(wm), bp.BStart(wm),
convertedSize.ISize(wm), convertedSize.BSize(wm)));
kid->FinishAndStoreOverflow(&kidMetrics);
kid->DidReflow(aPresContext, nullptr, nsDidReflowStatus::FINISHED);
convertedSize.ISize(wm) += bp.IStartEnd(wm);
convertedSize.BSize(wm) += bp.BStartEnd(wm);
aMetrics.SetSize(wm, convertedSize);
aMetrics.SetBlockStartAscent(kidMetrics.BlockStartAscent() +
bp.BStart(wm));
// Ensure that the overflow rect contains the child textframe's
// overflow rect.
// Note that if this is floating, the overline/underline drawable
// area is in the overflow rect of the child textframe.
aMetrics.UnionOverflowAreasWithDesiredBounds();
ConsiderChildOverflow(aMetrics.mOverflowAreas, kid);
FinishAndStoreOverflow(&aMetrics);
} else {
// Pretend we are a span and reflow the child frame
nsLineLayout* ll = aReflowInput.mLineLayout;
bool pushedFrame;
ll->SetInFirstLetter(
mStyleContext->GetPseudo() == nsCSSPseudoElements::firstLetter);
ll->BeginSpan(this, &aReflowInput, bp.IStart(wm),
availSize.ISize(wm), &mBaseline);
ll->ReflowFrame(kid, aReflowStatus, &kidMetrics, pushedFrame);
NS_ASSERTION(lineWM.IsVertical() == wm.IsVertical(),
"we're assuming we can mix sizes between lineWM and wm "
"since we shouldn't have orthogonal writing modes within "
"a line.");
aMetrics.ISize(lineWM) = ll->EndSpan(this) + bp.IStartEnd(wm);
ll->SetInFirstLetter(false);
if (mStyleContext->StyleTextReset()->mInitialLetterSize != 0.0f) {
aMetrics.SetBlockStartAscent(kidMetrics.BlockStartAscent() +
bp.BStart(wm));
aMetrics.BSize(lineWM) = kidMetrics.BSize(lineWM) + bp.BStartEnd(wm);
} else {
nsLayoutUtils::SetBSizeFromFontMetrics(this, aMetrics, bp, lineWM, wm);
}
}
if (!NS_INLINE_IS_BREAK_BEFORE(aReflowStatus)) {
// Create a continuation or remove existing continuations based on
// the reflow completion status.
if (NS_FRAME_IS_COMPLETE(aReflowStatus)) {
if (aReflowInput.mLineLayout) {
aReflowInput.mLineLayout->SetFirstLetterStyleOK(false);
}
nsIFrame* kidNextInFlow = kid->GetNextInFlow();
if (kidNextInFlow) {
// Remove all of the childs next-in-flows
kidNextInFlow->GetParent()->DeleteNextInFlowChild(kidNextInFlow, true);
}
} else {
// Create a continuation for the child frame if it doesn't already
// have one.
if (!IsFloating()) {
CreateNextInFlow(kid);
// And then push it to our overflow list
const nsFrameList& overflow = mFrames.RemoveFramesAfter(kid);
if (overflow.NotEmpty()) {
SetOverflowFrames(overflow);
}
} else if (!kid->GetNextInFlow()) {
// For floating first letter frames (if a continuation wasn't already
// created for us) we need to put the continuation with the rest of the
// text that the first letter frame was made out of.
nsIFrame* continuation;
CreateContinuationForFloatingParent(aPresContext, kid,
&continuation, true);
}
}
}
NS_FRAME_SET_TRUNCATION(aReflowStatus, aReflowInput, aMetrics);
}
void
BRFrame::Reflow(nsPresContext* aPresContext,
ReflowOutput& aMetrics,
const ReflowInput& aReflowInput,
nsReflowStatus& aStatus)
{
MarkInReflow();
DO_GLOBAL_REFLOW_COUNT("BRFrame");
DISPLAY_REFLOW(aPresContext, this, aReflowInput, aMetrics, aStatus);
WritingMode wm = aReflowInput.GetWritingMode();
LogicalSize finalSize(wm);
finalSize.BSize(wm) = 0; // BR frames with block size 0 are ignored in quirks
// mode by nsLineLayout::VerticalAlignFrames .
// However, it's not always 0. See below.
finalSize.ISize(wm) = 0;
aMetrics.SetBlockStartAscent(0);
// Only when the BR is operating in a line-layout situation will it
// behave like a BR. Additionally, we suppress breaks from BR inside
// of ruby frames. To determine if we're inside ruby, we have to rely
// on the *parent's* ShouldSuppressLineBreak() method, instead of our
// own, because we may have custom "display" value that makes our
// ShouldSuppressLineBreak() return false.
nsLineLayout* ll = aReflowInput.mLineLayout;
if (ll && !GetParent()->StyleContext()->ShouldSuppressLineBreak()) {
// Note that the compatibility mode check excludes AlmostStandards
// mode, since this is the inline box model. See bug 161691.
if ( ll->LineIsEmpty() ||
aPresContext->CompatibilityMode() == eCompatibility_FullStandards ) {
// The line is logically empty; any whitespace is trimmed away.
//
// If this frame is going to terminate the line we know
// that nothing else will go on the line. Therefore, in this
// case, we provide some height for the BR frame so that it
// creates some vertical whitespace. It's necessary to use the
// line-height rather than the font size because the
// quirks-mode fix that doesn't apply the block's min
// line-height makes this necessary to make BR cause a line
// of the full line-height
// We also do this in strict mode because BR should act like a
// normal inline frame. That line-height is used is important
// here for cases where the line-height is less than 1.
RefPtr<nsFontMetrics> fm =
nsLayoutUtils::GetInflatedFontMetricsForFrame(this);
if (fm) {
nscoord logicalHeight = aReflowInput.CalcLineHeight();
finalSize.BSize(wm) = logicalHeight;
aMetrics.SetBlockStartAscent(nsLayoutUtils::GetCenteredFontBaseline(
fm, logicalHeight, wm.IsLineInverted()));
}
else {
aMetrics.SetBlockStartAscent(aMetrics.BSize(wm) = 0);
}
// XXX temporary until I figure out a better solution; see the
// code in nsLineLayout::VerticalAlignFrames that zaps minY/maxY
// if the width is zero.
// XXX This also fixes bug 10036!
// Warning: nsTextControlFrame::CalculateSizeStandard depends on
// the following line, see bug 228752.
// The code below in AddInlinePrefISize also adds 1 appunit to width
finalSize.ISize(wm) = 1;
}
// Return our reflow status
uint32_t breakType = aReflowInput.mStyleDisplay->PhysicalBreakType(wm);
if (NS_STYLE_CLEAR_NONE == breakType) {
breakType = NS_STYLE_CLEAR_LINE;
}
aStatus = NS_INLINE_BREAK | NS_INLINE_BREAK_AFTER |
NS_INLINE_MAKE_BREAK_TYPE(breakType);
ll->SetLineEndsInBR(true);
}
else {
aStatus = NS_FRAME_COMPLETE;
}
aMetrics.SetSize(wm, finalSize);
aMetrics.SetOverflowAreasToDesiredBounds();
mAscent = aMetrics.BlockStartAscent();
NS_FRAME_SET_TRUNCATION(aStatus, aReflowInput, aMetrics);
}
void
nsSubDocumentFrame::Reflow(nsPresContext* aPresContext,
ReflowOutput& aDesiredSize,
const ReflowInput& aReflowInput,
nsReflowStatus& aStatus)
{
MarkInReflow();
DO_GLOBAL_REFLOW_COUNT("nsSubDocumentFrame");
DISPLAY_REFLOW(aPresContext, this, aReflowInput, aDesiredSize, aStatus);
NS_FRAME_TRACE(NS_FRAME_TRACE_CALLS,
("enter nsSubDocumentFrame::Reflow: maxSize=%d,%d",
aReflowInput.AvailableWidth(), aReflowInput.AvailableHeight()));
NS_ASSERTION(aReflowInput.ComputedWidth() != NS_UNCONSTRAINEDSIZE,
"Shouldn't have unconstrained stuff here "
"thanks to the rules of reflow");
NS_ASSERTION(NS_INTRINSICSIZE != aReflowInput.ComputedHeight(),
"Shouldn't have unconstrained stuff here "
"thanks to ComputeAutoSize");
aStatus = NS_FRAME_COMPLETE;
NS_ASSERTION(mContent->GetPrimaryFrame() == this,
"Shouldn't happen");
// XUL <iframe> or <browser>, or HTML <iframe>, <object> or <embed>
aDesiredSize.SetSize(aReflowInput.GetWritingMode(),
aReflowInput.ComputedSizeWithBorderPadding());
// "offset" is the offset of our content area from our frame's
// top-left corner.
nsPoint offset = nsPoint(aReflowInput.ComputedPhysicalBorderPadding().left,
aReflowInput.ComputedPhysicalBorderPadding().top);
if (mInnerView) {
const nsMargin& bp = aReflowInput.ComputedPhysicalBorderPadding();
nsSize innerSize(aDesiredSize.Width() - bp.LeftRight(),
aDesiredSize.Height() - bp.TopBottom());
// Size & position the view according to 'object-fit' & 'object-position'.
nsIFrame* subDocRoot = ObtainIntrinsicSizeFrame();
IntrinsicSize intrinsSize;
nsSize intrinsRatio;
if (subDocRoot) {
intrinsSize = subDocRoot->GetIntrinsicSize();
intrinsRatio = subDocRoot->GetIntrinsicRatio();
}
nsRect destRect =
nsLayoutUtils::ComputeObjectDestRect(nsRect(offset, innerSize),
intrinsSize, intrinsRatio,
StylePosition());
nsViewManager* vm = mInnerView->GetViewManager();
vm->MoveViewTo(mInnerView, destRect.x, destRect.y);
vm->ResizeView(mInnerView, nsRect(nsPoint(0, 0), destRect.Size()), true);
}
aDesiredSize.SetOverflowAreasToDesiredBounds();
if (!ShouldClipSubdocument()) {
nsIFrame* subdocRootFrame = GetSubdocumentRootFrame();
if (subdocRootFrame) {
aDesiredSize.mOverflowAreas.UnionWith(subdocRootFrame->GetOverflowAreas() + offset);
}
}
FinishAndStoreOverflow(&aDesiredSize);
if (!aPresContext->IsPaginated() && !mPostedReflowCallback) {
PresContext()->PresShell()->PostReflowCallback(this);
mPostedReflowCallback = true;
}
NS_FRAME_TRACE(NS_FRAME_TRACE_CALLS,
("exit nsSubDocumentFrame::Reflow: size=%d,%d status=%x",
aDesiredSize.Width(), aDesiredSize.Height(), aStatus));
NS_FRAME_SET_TRUNCATION(aStatus, aReflowInput, aDesiredSize);
}
void
nsTableCellFrame::Reflow(nsPresContext* aPresContext,
ReflowOutput& aDesiredSize,
const ReflowInput& aReflowInput,
nsReflowStatus& aStatus)
{
MarkInReflow();
DO_GLOBAL_REFLOW_COUNT("nsTableCellFrame");
DISPLAY_REFLOW(aPresContext, this, aReflowInput, aDesiredSize, aStatus);
if (aReflowInput.mFlags.mSpecialBSizeReflow) {
FirstInFlow()->AddStateBits(NS_TABLE_CELL_HAD_SPECIAL_REFLOW);
}
// see if a special bsize reflow needs to occur due to having a pct height
nsTableFrame::CheckRequestSpecialBSizeReflow(aReflowInput);
aStatus = NS_FRAME_COMPLETE;
WritingMode wm = aReflowInput.GetWritingMode();
LogicalSize availSize(wm, aReflowInput.AvailableISize(),
aReflowInput.AvailableBSize());
LogicalMargin borderPadding = aReflowInput.ComputedLogicalPadding();
LogicalMargin border = GetBorderWidth(wm);
borderPadding += border;
// reduce available space by insets, if we're in a constrained situation
availSize.ISize(wm) -= borderPadding.IStartEnd(wm);
if (NS_UNCONSTRAINEDSIZE != availSize.BSize(wm)) {
availSize.BSize(wm) -= borderPadding.BStartEnd(wm);
}
// Try to reflow the child into the available space. It might not
// fit or might need continuing.
if (availSize.BSize(wm) < 0) {
availSize.BSize(wm) = 1;
}
ReflowOutput kidSize(wm, aDesiredSize.mFlags);
kidSize.ClearSize();
SetPriorAvailISize(aReflowInput.AvailableISize());
nsIFrame* firstKid = mFrames.FirstChild();
NS_ASSERTION(firstKid, "Frame construction error, a table cell always has an inner cell frame");
nsTableFrame* tableFrame = GetTableFrame();
if (aReflowInput.mFlags.mSpecialBSizeReflow) {
const_cast<ReflowInput&>(aReflowInput).
SetComputedBSize(BSize(wm) - borderPadding.BStartEnd(wm));
DISPLAY_REFLOW_CHANGE();
}
else if (aPresContext->IsPaginated()) {
nscoord computedUnpaginatedBSize =
CalcUnpaginatedBSize((nsTableCellFrame&)*this,
*tableFrame, borderPadding.BStartEnd(wm));
if (computedUnpaginatedBSize > 0) {
const_cast<ReflowInput&>(aReflowInput).SetComputedBSize(computedUnpaginatedBSize);
DISPLAY_REFLOW_CHANGE();
}
}
else {
SetHasPctOverBSize(false);
}
WritingMode kidWM = firstKid->GetWritingMode();
ReflowInput kidReflowInput(aPresContext, aReflowInput, firstKid,
availSize.ConvertTo(kidWM, wm));
// Don't be a percent height observer if we're in the middle of
// special-bsize reflow, in case we get an accidental NotifyPercentBSize()
// call (which we shouldn't honor during special-bsize reflow)
if (!aReflowInput.mFlags.mSpecialBSizeReflow) {
// mPercentBSizeObserver is for children of cells in quirks mode,
// but only those than are tables in standards mode. NeedsToObserve
// will determine how far this is propagated to descendants.
kidReflowInput.mPercentBSizeObserver = this;
}
// Don't propagate special bsize reflow state to our kids
kidReflowInput.mFlags.mSpecialBSizeReflow = false;
if (aReflowInput.mFlags.mSpecialBSizeReflow ||
FirstInFlow()->HasAnyStateBits(NS_TABLE_CELL_HAD_SPECIAL_REFLOW)) {
// We need to force the kid to have mBResize set if we've had a
// special reflow in the past, since the non-special reflow needs to
// resize back to what it was without the special bsize reflow.
kidReflowInput.SetBResize(true);
}
nsSize containerSize =
aReflowInput.ComputedSizeAsContainerIfConstrained();
LogicalPoint kidOrigin(wm, borderPadding.IStart(wm),
borderPadding.BStart(wm));
nsRect origRect = firstKid->GetRect();
nsRect origVisualOverflow = firstKid->GetVisualOverflowRect();
bool firstReflow = firstKid->HasAnyStateBits(NS_FRAME_FIRST_REFLOW);
ReflowChild(firstKid, aPresContext, kidSize, kidReflowInput,
wm, kidOrigin, containerSize, 0, aStatus);
if (NS_FRAME_OVERFLOW_IS_INCOMPLETE(aStatus)) {
// Don't pass OVERFLOW_INCOMPLETE through tables until they can actually handle it
//XXX should paginate overflow as overflow, but not in this patch (bug 379349)
NS_FRAME_SET_INCOMPLETE(aStatus);
printf("Set table cell incomplete %p\n", static_cast<void*>(this));
}
// XXXbz is this invalidate actually needed, really?
if (HasAnyStateBits(NS_FRAME_IS_DIRTY)) {
InvalidateFrameSubtree();
}
#ifdef DEBUG
DebugCheckChildSize(firstKid, kidSize);
#endif
// 0 dimensioned cells need to be treated specially in Standard/NavQuirks mode
// see testcase "emptyCells.html"
nsIFrame* prevInFlow = GetPrevInFlow();
bool isEmpty;
if (prevInFlow) {
isEmpty = static_cast<nsTableCellFrame*>(prevInFlow)->GetContentEmpty();
} else {
isEmpty = !CellHasVisibleContent(kidSize.Height(), tableFrame, firstKid);
}
SetContentEmpty(isEmpty);
// Place the child
FinishReflowChild(firstKid, aPresContext, kidSize, &kidReflowInput,
wm, kidOrigin, containerSize, 0);
nsTableFrame::InvalidateTableFrame(firstKid, origRect, origVisualOverflow,
firstReflow);
// first, compute the bsize which can be set w/o being restricted by
// available bsize
LogicalSize cellSize(wm);
cellSize.BSize(wm) = kidSize.BSize(wm);
if (NS_UNCONSTRAINEDSIZE != cellSize.BSize(wm)) {
cellSize.BSize(wm) += borderPadding.BStartEnd(wm);
}
// next determine the cell's isize
cellSize.ISize(wm) = kidSize.ISize(wm); // at this point, we've factored in the cell's style attributes
// factor in border and padding
if (NS_UNCONSTRAINEDSIZE != cellSize.ISize(wm)) {
cellSize.ISize(wm) += borderPadding.IStartEnd(wm);
}
// set the cell's desired size and max element size
aDesiredSize.SetSize(wm, cellSize);
// the overflow area will be computed when BlockDirAlignChild() gets called
if (aReflowInput.mFlags.mSpecialBSizeReflow) {
if (aDesiredSize.BSize(wm) > BSize(wm)) {
// set a bit indicating that the pct bsize contents exceeded
// the height that they could honor in the pass 2 reflow
SetHasPctOverBSize(true);
}
if (NS_UNCONSTRAINEDSIZE == aReflowInput.AvailableBSize()) {
aDesiredSize.BSize(wm) = BSize(wm);
}
}
// If our parent is in initial reflow, it'll handle invalidating our
// entire overflow rect.
if (!GetParent()->HasAnyStateBits(NS_FRAME_FIRST_REFLOW) &&
nsSize(aDesiredSize.Width(), aDesiredSize.Height()) != mRect.Size()) {
InvalidateFrame();
}
// remember the desired size for this reflow
SetDesiredSize(aDesiredSize);
// Any absolutely-positioned children will get reflowed in
// nsFrame::FixupPositionedTableParts in another pass, so propagate our
// dirtiness to them before our parent clears our dirty bits.
PushDirtyBitToAbsoluteFrames();
NS_FRAME_SET_TRUNCATION(aStatus, aReflowInput, aDesiredSize);
}