MODULE::MODULE( const MODULE& aModule ) :
BOARD_ITEM( aModule )
{
m_Pos = aModule.m_Pos;
m_fpid = aModule.m_fpid;
m_Layer = aModule.m_Layer;
m_Attributs = aModule.m_Attributs;
m_ModuleStatus = aModule.m_ModuleStatus;
m_Orient = aModule.m_Orient;
m_BoundaryBox = aModule.m_BoundaryBox;
m_CntRot90 = aModule.m_CntRot90;
m_CntRot180 = aModule.m_CntRot180;
m_LastEditTime = aModule.m_LastEditTime;
m_Link = aModule.m_Link;
m_Path = aModule.m_Path; //is this correct behavior?
m_LocalClearance = aModule.m_LocalClearance;
m_LocalSolderMaskMargin = aModule.m_LocalSolderMaskMargin;
m_LocalSolderPasteMargin = aModule.m_LocalSolderPasteMargin;
m_LocalSolderPasteMarginRatio = aModule.m_LocalSolderPasteMarginRatio;
m_ZoneConnection = aModule.m_ZoneConnection;
m_ThermalWidth = aModule.m_ThermalWidth;
m_ThermalGap = aModule.m_ThermalGap;
// Copy reference and value.
m_Reference = new TEXTE_MODULE( *aModule.m_Reference );
m_Reference->SetParent( this );
m_Value = new TEXTE_MODULE( *aModule.m_Value );
m_Value->SetParent( this );
// Copy auxiliary data: Pads
for( D_PAD* pad = aModule.m_Pads; pad; pad = pad->Next() )
{
D_PAD* newpad = new D_PAD( *pad );
assert( newpad->GetNet() == pad->GetNet() );
newpad->SetParent( this );
m_Pads.PushBack( newpad );
}
// Copy auxiliary data: Drawings
for( BOARD_ITEM* item = aModule.m_Drawings; item; item = item->Next() )
{
BOARD_ITEM* newItem;
switch( item->Type() )
{
case PCB_MODULE_TEXT_T:
case PCB_MODULE_EDGE_T:
newItem = static_cast<BOARD_ITEM*>( item->Clone() );
newItem->SetParent( this );
m_Drawings.PushBack( newItem );
break;
default:
wxLogMessage( wxT( "MODULE::Copy() Internal Err: unknown type" ) );
break;
}
}
// Copy auxiliary data: 3D_Drawings info
for( S3D_MASTER* item = aModule.m_3D_Drawings; item; item = item->Next() )
{
if( item->GetShape3DName().IsEmpty() ) // do not copy empty shapes.
continue;
S3D_MASTER* t3d = new S3D_MASTER( this );
t3d->Copy( item );
m_3D_Drawings.PushBack( t3d );
}
// Ensure there is at least one item in m_3D_Drawings.
if( m_3D_Drawings.GetCount() == 0 )
m_3D_Drawings.PushBack( new S3D_MASTER( this ) ); // push a void item
m_Doc = aModule.m_Doc;
m_KeyWord = aModule.m_KeyWord;
m_arflag = 0;
// Ensure auxiliary data is up to date
CalculateBoundingBox();
m_initial_comments = aModule.m_initial_comments ?
new wxArrayString( *aModule.m_initial_comments ) : 0;
}
void MODULE::Copy( MODULE* aModule )
{
m_Pos = aModule->m_Pos;
m_Layer = aModule->m_Layer;
m_fpid = aModule->m_fpid;
m_Attributs = aModule->m_Attributs;
m_ModuleStatus = aModule->m_ModuleStatus;
m_Orient = aModule->m_Orient;
m_BoundaryBox = aModule->m_BoundaryBox;
m_CntRot90 = aModule->m_CntRot90;
m_CntRot180 = aModule->m_CntRot180;
m_LastEditTime = aModule->m_LastEditTime;
m_Link = aModule->m_Link;
m_Path = aModule->m_Path; //is this correct behavior?
SetTimeStamp( GetNewTimeStamp() );
m_LocalClearance = aModule->m_LocalClearance;
m_LocalSolderMaskMargin = aModule->m_LocalSolderMaskMargin;
m_LocalSolderPasteMargin = aModule->m_LocalSolderPasteMargin;
m_LocalSolderPasteMarginRatio = aModule->m_LocalSolderPasteMarginRatio;
m_ZoneConnection = aModule->m_ZoneConnection;
m_ThermalWidth = aModule->m_ThermalWidth;
m_ThermalGap = aModule->m_ThermalGap;
// Copy reference and value.
m_Reference->Copy( aModule->m_Reference );
m_Value->Copy( aModule->m_Value );
// Copy auxiliary data: Pads
m_Pads.DeleteAll();
for( D_PAD* pad = aModule->m_Pads; pad; pad = pad->Next() )
{
D_PAD* newpad = new D_PAD( this );
newpad->Copy( pad );
m_Pads.PushBack( newpad );
}
// Copy auxiliary data: Drawings
m_Drawings.DeleteAll();
for( BOARD_ITEM* item = aModule->m_Drawings; item; item = item->Next() )
{
switch( item->Type() )
{
case PCB_MODULE_TEXT_T:
{
TEXTE_MODULE* textm = new TEXTE_MODULE( this );
textm->Copy( static_cast<TEXTE_MODULE*>( item ) );
m_Drawings.PushBack( textm );
break;
}
case PCB_MODULE_EDGE_T:
{
EDGE_MODULE * edge;
edge = new EDGE_MODULE( this );
edge->Copy( (EDGE_MODULE*) item );
m_Drawings.PushBack( edge );
break;
}
default:
wxLogMessage( wxT( "MODULE::Copy() Internal Err: unknown type" ) );
break;
}
}
// Copy auxiliary data: 3D_Drawings info
m_3D_Drawings.DeleteAll();
// Ensure there is one (or more) item in m_3D_Drawings
m_3D_Drawings.PushBack( new S3D_MASTER( this ) ); // push a void item
for( S3D_MASTER* item = aModule->m_3D_Drawings; item; item = item->Next() )
{
if( item->GetShape3DName().IsEmpty() ) // do not copy empty shapes.
continue;
S3D_MASTER* t3d = m_3D_Drawings;
if( t3d && t3d->GetShape3DName().IsEmpty() ) // The first entry can
{ // exist, but is empty : use it.
t3d->Copy( item );
}
else
{
t3d = new S3D_MASTER( this );
t3d->Copy( item );
m_3D_Drawings.PushBack( t3d );
}
}
m_Doc = aModule->m_Doc;
m_KeyWord = aModule->m_KeyWord;
// Ensure auxiliary data is up to date
CalculateBoundingBox();
}
