void SCH_EDIT_FRAME::OrientComponent( COMPONENT_ORIENTATION_T aOrientation )
{
SCH_SCREEN* screen = GetScreen();
SCH_ITEM* item = screen->GetCurItem();
wxCHECK_RET( item != NULL && item->Type() == SCH_COMPONENT_T,
wxT( "Cannot change orientation of invalid schematic item." ) );
SCH_COMPONENT* component = (SCH_COMPONENT*) item;
m_canvas->MoveCursorToCrossHair();
if( item->GetFlags() == 0 )
SetUndoItem( item );
INSTALL_UNBUFFERED_DC( dc, m_canvas );
component->SetOrientation( aOrientation );
m_canvas->CrossHairOn( &dc );
if( item->GetFlags() == 0 )
{
addCurrentItemToList();
SchematicCleanUp( true );
}
if( GetScreen()->TestDanglingEnds() )
m_canvas->Refresh();
OnModify();
}
void SCH_EDIT_FRAME::OrientComponent( COMPONENT_ORIENTATION_T aOrientation )
{
SCH_SCREEN* screen = GetScreen();
SCH_ITEM* item = screen->GetCurItem();
SCH_COMPONENT* component = (SCH_COMPONENT*) item;
GetCanvas()->MoveCursorToCrossHair();
if( item->GetFlags() == 0 )
SetUndoItem( item );
component->SetOrientation( aOrientation );
m_canvas->CrossHairOn( );
if( item->GetFlags() == 0 )
{
addCurrentItemToScreen();
SchematicCleanUp();
}
TestDanglingEnds();
RefreshItem( item );
if( item->GetFlags() == 0 )
OnModify();
}
bool SCH_SCREEN::SchematicCleanUp()
{
bool modified = false;
for( SCH_ITEM* item = m_drawList.begin() ; item; item = item->Next() )
{
if( ( item->Type() != SCH_LINE_T ) && ( item->Type() != SCH_JUNCTION_T ) )
continue;
bool restart;
for( SCH_ITEM* testItem = item->Next(); testItem; testItem = restart ? m_drawList.begin() : testItem->Next() )
{
restart = false;
if( ( item->Type() == SCH_LINE_T ) && ( testItem->Type() == SCH_LINE_T ) )
{
SCH_LINE* line = (SCH_LINE*) item;
if( line->MergeOverlap( (SCH_LINE*) testItem ) )
{
// Keep the current flags, because the deleted segment can be flagged.
item->SetFlags( testItem->GetFlags() );
DeleteItem( testItem );
restart = true;
modified = true;
}
}
else if ( ( ( item->Type() == SCH_JUNCTION_T )
&& ( testItem->Type() == SCH_JUNCTION_T ) ) && ( testItem != item ) )
{
if ( testItem->HitTest( item->GetPosition() ) )
{
// Keep the current flags, because the deleted segment can be flagged.
item->SetFlags( testItem->GetFlags() );
DeleteItem( testItem );
restart = true;
modified = true;
}
}
}
}
TestDanglingEnds();
return modified;
}
void SCH_SCREEN::addConnectedItemsToBlock( const wxPoint& position )
{
SCH_ITEM* item;
ITEM_PICKER picker;
bool addinlist = true;
for( item = m_drawList.begin(); item; item = item->Next() )
{
picker.SetItem( item );
if( !item->IsConnectable() || !item->IsConnected( position )
|| (item->GetFlags() & SKIP_STRUCT) )
continue;
if( item->IsSelected() && item->Type() != SCH_LINE_T )
continue;
// A line having 2 ends, it can be tested twice: one time per end
if( item->Type() == SCH_LINE_T )
{
if( ! item->IsSelected() ) // First time this line is tested
item->SetFlags( SELECTED | STARTPOINT | ENDPOINT );
else // second time (or more) this line is tested
addinlist = false;
SCH_LINE* line = (SCH_LINE*) item;
if( line->GetStartPoint() == position )
item->ClearFlags( STARTPOINT );
else if( line->GetEndPoint() == position )
item->ClearFlags( ENDPOINT );
}
else
item->SetFlags( SELECTED );
if( addinlist )
{
picker.SetFlags( item->GetFlags() );
m_BlockLocate.GetItems().PushItem( picker );
}
}
}
void SCH_EDIT_FRAME::DeleteItemsInList( PICKED_ITEMS_LIST& aItemsList, bool aAppend )
{
PICKED_ITEMS_LIST itemsList;
for( unsigned ii = 0; ii < aItemsList.GetCount(); ii++ )
{
SCH_ITEM* item = (SCH_ITEM*) aItemsList.GetPickedItem( ii );
ITEM_PICKER itemWrapper( item, UR_DELETED );
if( item->GetFlags() & STRUCT_DELETED )
continue;
DeleteItem( item, aAppend );
aAppend = true;
}
GetScreen()->ClearDrawingState();
}
void SCH_EDIT_FRAME::OnOpenLibraryEditor( wxCommandEvent& event )
{
SCH_COMPONENT* component = NULL;
if( event.GetId() == ID_POPUP_SCH_CALL_LIBEDIT_AND_LOAD_CMP )
{
SCH_ITEM* item = GetScreen()->GetCurItem();
if( (item == NULL) || (item->GetFlags() != 0) || ( item->Type() != SCH_COMPONENT_T ) )
{
wxMessageBox( _("Error: not a component or no component" ) );
return;
}
component = (SCH_COMPONENT*) item;
}
LIB_EDIT_FRAME* libeditFrame = LIB_EDIT_FRAME::GetActiveLibraryEditor();;
if( libeditFrame )
{
if( libeditFrame->IsIconized() )
libeditFrame->Iconize( false );
libeditFrame->Raise();
}
else
{
wxWindow* w = Kiface().CreateWindow( this, LIBEDITOR_FRAME_TYPE, &Kiway() );
libeditFrame = dynamic_cast<LIB_EDIT_FRAME*>( w );
}
if( component )
{
LIB_ALIAS* entry = CMP_LIBRARY::FindLibraryEntry( component->GetLibName() );
if( entry == NULL ) // Should not occur
return;
CMP_LIBRARY* library = entry->GetLibrary();
libeditFrame->LoadComponentAndSelectLib( entry, library );
}
}
void SCH_SCREEN::MarkConnections( SCH_LINE* aSegment )
{
wxCHECK_RET( (aSegment) && (aSegment->Type() == SCH_LINE_T),
wxT( "Invalid object pointer." ) );
for( SCH_ITEM* item = m_drawList.begin(); item; item = item->Next() )
{
if( item->GetFlags() & CANDIDATE )
continue;
if( item->Type() == SCH_JUNCTION_T )
{
SCH_JUNCTION* junction = (SCH_JUNCTION*) item;
if( aSegment->IsEndPoint( junction->GetPosition() ) )
item->SetFlags( CANDIDATE );
continue;
}
if( item->Type() != SCH_LINE_T )
continue;
SCH_LINE* segment = (SCH_LINE*) item;
if( aSegment->IsEndPoint( segment->GetStartPoint() )
&& !GetPin( segment->GetStartPoint(), NULL, true ) )
{
item->SetFlags( CANDIDATE );
MarkConnections( segment );
}
if( aSegment->IsEndPoint( segment->GetEndPoint() )
&& !GetPin( segment->GetEndPoint(), NULL, true ) )
{
item->SetFlags( CANDIDATE );
MarkConnections( segment );
}
}
}
bool SCH_EDIT_FRAME::OnRightClick( const wxPoint& aPosition, wxMenu* PopMenu )
{
SCH_ITEM* item = GetScreen()->GetCurItem();
bool blockActive = GetScreen()->IsBlockActive();
wxString msg;
// Do not start a block command on context menu.
m_canvas->SetCanStartBlock( -1 );
if( blockActive )
{
AddMenusForBlock( PopMenu, this );
PopMenu->AppendSeparator();
// If we have a block containing only one main element
// we append its edition submenu
if( item != NULL )
{
switch( item->Type() )
{
case SCH_COMPONENT_T:
AddMenusForEditComponent( PopMenu, (SCH_COMPONENT *) item, Prj().SchLibs() );
PopMenu->AppendSeparator();
break;
case SCH_TEXT_T:
msg = AddHotkeyName( _( "Edit Text" ), g_Schematic_Hokeys_Descr, HK_EDIT );
AddMenuItem( PopMenu, ID_SCH_EDIT_ITEM, msg, KiBitmap( edit_text_xpm ) );
PopMenu->AppendSeparator();
break;
case SCH_LABEL_T:
msg = AddHotkeyName( _( "Edit Label" ), g_Schematic_Hokeys_Descr, HK_EDIT );
AddMenuItem( PopMenu, ID_SCH_EDIT_ITEM, msg, KiBitmap( edit_text_xpm ) );
PopMenu->AppendSeparator();
break;
case SCH_GLOBAL_LABEL_T:
msg = AddHotkeyName( _( "Edit Global Label" ), g_Schematic_Hokeys_Descr,
HK_EDIT );
AddMenuItem( PopMenu, ID_SCH_EDIT_ITEM, msg, KiBitmap( edit_text_xpm ) );
PopMenu->AppendSeparator();
break;
case SCH_HIERARCHICAL_LABEL_T:
msg = AddHotkeyName( _( "Edit Hierarchical Label" ), g_Schematic_Hokeys_Descr,
HK_EDIT );
AddMenuItem( PopMenu, ID_SCH_EDIT_ITEM, msg, KiBitmap( edit_text_xpm ) );
PopMenu->AppendSeparator();
break;
case SCH_BITMAP_T:
msg = AddHotkeyName( _( "Edit Image" ), g_Schematic_Hokeys_Descr, HK_EDIT );
AddMenuItem( PopMenu, ID_SCH_EDIT_ITEM, msg, KiBitmap( image_xpm ) );
PopMenu->AppendSeparator();
break;
default:
break;
}
}
return true;
}
// Try to locate items at cursor position.
if( (item == NULL) || (item->GetFlags() == 0) )
{
item = LocateAndShowItem( aPosition, SCH_COLLECTOR::AllItemsButPins );
// If the clarify item selection context menu is aborted, don't show the context menu.
if( item == NULL && m_canvas->GetAbortRequest() )
{
m_canvas->SetAbortRequest( false );
return false;
}
}
// If a command is in progress: add "cancel" and "end tool" menu
// If
if( GetToolId() != ID_NO_TOOL_SELECTED )
{
if( item && item->GetFlags() )
{
AddMenuItem( PopMenu, ID_CANCEL_CURRENT_COMMAND, _( "Cancel" ),
KiBitmap( cancel_xpm ) );
}
else
{
AddMenuItem( PopMenu, ID_CANCEL_CURRENT_COMMAND, _( "End Tool" ),
KiBitmap( cursor_xpm ) );
}
PopMenu->AppendSeparator();
switch( GetToolId() )
{
case ID_WIRE_BUTT:
AddMenusForWire( PopMenu, NULL, this );
if( item == NULL )
PopMenu->AppendSeparator();
break;
case ID_BUS_BUTT:
AddMenusForBus( PopMenu, NULL, this );
if( item == NULL )
PopMenu->AppendSeparator();
break;
default:
break;
}
}
else
{
if( item && item->GetFlags() )
{
AddMenuItem( PopMenu, ID_CANCEL_CURRENT_COMMAND, _( "Cancel" ),
KiBitmap( cancel_xpm ) );
PopMenu->AppendSeparator();
}
}
if( item == NULL )
{
if( m_CurrentSheet->Last() != g_RootSheet )
{
msg = AddHotkeyName( _( "Leave Sheet" ), g_Schematic_Hokeys_Descr, HK_LEAVE_SHEET );
AddMenuItem( PopMenu, ID_POPUP_SCH_LEAVE_SHEET, msg,
KiBitmap( leave_sheet_xpm ) );
PopMenu->AppendSeparator();
}
return true;
}
bool is_new = item->IsNew();
switch( item->Type() )
{
case SCH_NO_CONNECT_T:
AddMenuItem( PopMenu, ID_POPUP_SCH_DELETE, _( "Delete No Connect" ),
KiBitmap( delete_xpm ) );
break;
case SCH_JUNCTION_T:
addJunctionMenuEntries( PopMenu, (SCH_JUNCTION*) item );
break;
case SCH_BUS_BUS_ENTRY_T:
case SCH_BUS_WIRE_ENTRY_T:
AddMenusForBusEntry( PopMenu, static_cast<SCH_BUS_ENTRY_BASE*>( item ) );
break;
case SCH_MARKER_T:
AddMenusForMarkers( PopMenu, (SCH_MARKER*) item, this );
break;
case SCH_TEXT_T:
AddMenusForText( PopMenu, (SCH_TEXT*) item );
break;
case SCH_LABEL_T:
AddMenusForLabel( PopMenu, (SCH_LABEL*) item );
break;
case SCH_GLOBAL_LABEL_T:
AddMenusForGLabel( PopMenu, (SCH_GLOBALLABEL*) item );
break;
case SCH_HIERARCHICAL_LABEL_T:
AddMenusForHLabel( PopMenu, (SCH_HIERLABEL*) item );
break;
case SCH_FIELD_T:
AddMenusForComponentField( PopMenu, (SCH_FIELD*) item );
break;
case SCH_COMPONENT_T:
AddMenusForComponent( PopMenu, (SCH_COMPONENT*) item, Prj().SchLibs() );
break;
case SCH_BITMAP_T:
AddMenusForBitmap( PopMenu, (SCH_BITMAP*) item );
break;
case SCH_LINE_T:
switch( item->GetLayer() )
{
case LAYER_WIRE:
AddMenusForWire( PopMenu, (SCH_LINE*) item, this );
break;
case LAYER_BUS:
AddMenusForBus( PopMenu, (SCH_LINE*) item, this );
break;
default:
if( is_new )
AddMenuItem( PopMenu, ID_POPUP_END_LINE, _( "End Drawing" ),
KiBitmap( checked_ok_xpm ) );
AddMenuItem( PopMenu, ID_POPUP_SCH_DELETE, _( "Delete Drawing" ),
KiBitmap( delete_xpm ) );
break;
}
break;
case SCH_SHEET_T:
AddMenusForHierchicalSheet( PopMenu, (SCH_SHEET*) item );
break;
case SCH_SHEET_PIN_T:
AddMenusForSheetPin( PopMenu, (SCH_SHEET_PIN*) item );
break;
default:
wxFAIL_MSG( wxString::Format( wxT( "Cannot create context menu for unknown type %d" ),
item->Type() ) );
break;
}
PopMenu->AppendSeparator();
return true;
}
void SCH_SCREEN::SelectBlockItems()
{
PICKED_ITEMS_LIST* pickedlist = &m_BlockLocate.GetItems();
if( pickedlist->GetCount() == 0 )
return;
ClearDrawingState();
for( unsigned ii = 0; ii < pickedlist->GetCount(); ii++ )
{
SCH_ITEM* item = (SCH_ITEM*) pickedlist->GetPickedItem( ii );
item->SetFlags( SELECTED );
}
if( !m_BlockLocate.IsDragging() )
return;
// Select all the items in the screen connected to the items in the block.
// be sure end lines that are on the block limits are seen inside this block
m_BlockLocate.Inflate( 1 );
unsigned last_select_id = pickedlist->GetCount();
for( unsigned ii = 0; ii < last_select_id; ii++ )
{
SCH_ITEM* item = (SCH_ITEM*)pickedlist->GetPickedItem( ii );
item->SetFlags( IS_DRAGGED );
if( item->Type() == SCH_LINE_T )
{
item->IsSelectStateChanged( m_BlockLocate );
if( !item->IsSelected() )
{ // This is a special case:
// this selected wire has no ends in block.
// But it was selected (because it intersects the selecting area),
// so we must keep it selected and select items connected to it
// Note: an other option could be: remove it from drag list
item->SetFlags( SELECTED | SKIP_STRUCT );
std::vector< wxPoint > connections;
item->GetConnectionPoints( connections );
for( size_t i = 0; i < connections.size(); i++ )
addConnectedItemsToBlock( connections[i] );
}
pickedlist->SetPickerFlags( item->GetFlags(), ii );
}
else if( item->IsConnectable() )
{
std::vector< wxPoint > connections;
item->GetConnectionPoints( connections );
for( size_t jj = 0; jj < connections.size(); jj++ )
addConnectedItemsToBlock( connections[jj] );
}
}
m_BlockLocate.Inflate( -1 );
}
void SCH_EDIT_FRAME::OnDragItem( wxCommandEvent& aEvent )
{
SCH_SCREEN* screen = GetScreen();
SCH_ITEM* item = screen->GetCurItem();
// The easiest way to handle a menu or a hot key drag command
// is to simulate a block drag command
//
// When a drag item is requested, some items use a BLOCK_DRAG_ITEM drag type
// an some items use a BLOCK_DRAG drag type (mainly a junction)
// a BLOCK_DRAG collects all items in a block (here a 2x2 rect centered on the cursor)
// and BLOCK_DRAG_ITEM drag only the selected item
BLOCK_COMMAND_T dragType = BLOCK_DRAG_ITEM;
if( item == NULL )
{
// If we didn't get here by a hot key, then something has gone wrong.
if( aEvent.GetInt() == 0 )
return;
EDA_HOTKEY_CLIENT_DATA* data = (EDA_HOTKEY_CLIENT_DATA*) aEvent.GetClientObject();
wxCHECK_RET( data != NULL, wxT( "Invalid hot key client object." ) );
item = LocateAndShowItem( data->GetPosition(), SCH_COLLECTOR::DraggableItems,
aEvent.GetInt() );
// Exit if no item found at the current location or the item is already being edited.
if( (item == NULL) || (item->GetFlags() != 0) )
return;
// When a junction or a node is found, a BLOCK_DRAG is better
if( m_collectedItems.IsCorner() || m_collectedItems.IsNode( false )
|| m_collectedItems.IsDraggableJunction() )
dragType = BLOCK_DRAG;
}
switch( item->Type() )
{
case SCH_BUS_BUS_ENTRY_T:
case SCH_BUS_WIRE_ENTRY_T:
case SCH_LINE_T:
case SCH_JUNCTION_T:
case SCH_COMPONENT_T:
case SCH_LABEL_T:
case SCH_GLOBAL_LABEL_T:
case SCH_HIERARCHICAL_LABEL_T:
case SCH_SHEET_T:
m_canvas->MoveCursorToCrossHair();
if( screen->m_BlockLocate.GetState() == STATE_NO_BLOCK )
{
INSTALL_UNBUFFERED_DC( dc, m_canvas );
if( !HandleBlockBegin( &dc, dragType, GetCrossHairPosition() ) )
break;
// Give a non null size to the search block:
screen->m_BlockLocate.Inflate( 1 );
HandleBlockEnd( &dc );
}
break;
default:
wxFAIL_MSG( wxString::Format( wxT( "Cannot drag schematic item type %s." ),
GetChars( item->GetClass() ) ) );
}
}
void SCH_EDIT_FRAME::OnMoveItem( wxCommandEvent& aEvent )
{
SCH_SCREEN* screen = GetScreen();
SCH_ITEM* item = screen->GetCurItem();
if( screen->m_BlockLocate.GetState() != STATE_NO_BLOCK )
{
// trying to move an item when there is a block at the same time is not acceptable
return;
}
if( item == NULL )
{
// If we didn't get here by a hot key, then something has gone wrong.
if( aEvent.GetInt() == 0 )
return;
EDA_HOTKEY_CLIENT_DATA* data = (EDA_HOTKEY_CLIENT_DATA*) aEvent.GetClientObject();
wxCHECK_RET( data != NULL, wxT( "Invalid hot key client object." ) );
item = LocateAndShowItem( data->GetPosition(), SCH_COLLECTOR::MovableItems,
aEvent.GetInt() );
// Exit if no item found at the current location or the item is already being edited.
if( (item == NULL) || (item->GetFlags() != 0) )
return;
}
INSTALL_UNBUFFERED_DC( dc, m_canvas );
switch( item->Type() )
{
case SCH_LINE_T:
break;
case SCH_JUNCTION_T:
case SCH_NO_CONNECT_T:
case SCH_BUS_BUS_ENTRY_T:
case SCH_BUS_WIRE_ENTRY_T:
case SCH_LABEL_T:
case SCH_GLOBAL_LABEL_T:
case SCH_HIERARCHICAL_LABEL_T:
case SCH_TEXT_T:
case SCH_COMPONENT_T:
case SCH_SHEET_PIN_T:
case SCH_FIELD_T:
case SCH_SHEET_T:
PrepareMoveItem( item, &dc );
break;
case SCH_BITMAP_T:
// move an image is a special case:
// we cannot undraw/redraw a bitmap just using our xor mode
// the MoveImage function handle this undraw/redraw difficulty
// By redrawing the full bounding box
MoveImage( (SCH_BITMAP*) item, &dc );
break;
case SCH_MARKER_T:
// Moving a marker has no sense
break;
default:
// Unknown items cannot be moved
wxFAIL_MSG( wxString::Format(
wxT( "Cannot move item type %d" ), item->Type() ) );
break;
}
if( GetToolId() == ID_NO_TOOL_SELECTED )
SetRepeatItem( NULL );
}
int SCH_SCREEN::GetConnection( const wxPoint& aPosition, PICKED_ITEMS_LIST& aList,
bool aFullConnection )
{
SCH_ITEM* item;
EDA_ITEM* tmp;
EDA_ITEMS list;
// Clear flags member for all items.
ClearDrawingState();
BreakSegmentsOnJunctions();
if( GetNode( aPosition, list ) == 0 )
return 0;
for( size_t i = 0; i < list.size(); i++ )
{
item = (SCH_ITEM*) list[ i ];
item->SetFlags( SELECTEDNODE | STRUCT_DELETED );
/* Put this structure in the picked list: */
ITEM_PICKER picker( item, UR_DELETED );
aList.PushItem( picker );
}
// Mark all wires, junctions, .. connected to the item(s) found.
if( aFullConnection )
{
SCH_LINE* segment;
for( item = m_drawList.begin(); item; item = item->Next() )
{
if( !(item->GetFlags() & SELECTEDNODE) )
continue;
if( item->Type() != SCH_LINE_T )
continue;
MarkConnections( (SCH_LINE*) item );
}
// Search all attached wires (i.e wire with one new dangling end )
for( item = m_drawList.begin(); item; item = item->Next() )
{
bool noconnect = false;
if( item->GetFlags() & STRUCT_DELETED )
continue; // Already seen
if( !(item->GetFlags() & CANDIDATE) )
continue; // not a candidate
if( item->Type() != SCH_LINE_T )
continue;
item->SetFlags( SKIP_STRUCT );
segment = (SCH_LINE*) item;
/* If the wire start point is connected to a wire that was already found
* and now is not connected, add the wire to the list. */
for( tmp = m_drawList.begin(); tmp; tmp = tmp->Next() )
{
// Ensure tmp is a previously deleted segment:
if( ( tmp->GetFlags() & STRUCT_DELETED ) == 0 )
continue;
if( tmp->Type() != SCH_LINE_T )
continue;
SCH_LINE* testSegment = (SCH_LINE*) tmp;
// Test for segment connected to the previously deleted segment:
if( testSegment->IsEndPoint( segment->GetStartPoint() ) )
break;
}
// when tmp != NULL, segment is a new candidate:
// put it in deleted list if
// the start point is not connected to an other item (like pin)
if( tmp && !CountConnectedItems( segment->GetStartPoint(), true ) )
noconnect = true;
/* If the wire end point is connected to a wire that has already been found
* and now is not connected, add the wire to the list. */
for( tmp = m_drawList.begin(); tmp; tmp = tmp->Next() )
{
// Ensure tmp is a previously deleted segment:
if( ( tmp->GetFlags() & STRUCT_DELETED ) == 0 )
continue;
if( tmp->Type() != SCH_LINE_T )
continue;
SCH_LINE* testSegment = (SCH_LINE*) tmp;
// Test for segment connected to the previously deleted segment:
if( testSegment->IsEndPoint( segment->GetEndPoint() ) )
break;
}
// when tmp != NULL, segment is a new candidate:
// put it in deleted list if
// the end point is not connected to an other item (like pin)
if( tmp && !CountConnectedItems( segment->GetEndPoint(), true ) )
noconnect = true;
item->ClearFlags( SKIP_STRUCT );
if( noconnect )
{
item->SetFlags( STRUCT_DELETED );
ITEM_PICKER picker( item, UR_DELETED );
aList.PushItem( picker );
item = m_drawList.begin();
}
}
// Get redundant junctions (junctions which connect < 3 end wires
// and no pin)
for( item = m_drawList.begin(); item; item = item->Next() )
{
if( item->GetFlags() & STRUCT_DELETED )
continue;
if( !(item->GetFlags() & CANDIDATE) )
continue;
if( item->Type() != SCH_JUNCTION_T )
continue;
SCH_JUNCTION* junction = (SCH_JUNCTION*) item;
if( CountConnectedItems( junction->GetPosition(), false ) <= 2 )
{
item->SetFlags( STRUCT_DELETED );
ITEM_PICKER picker( item, UR_DELETED );
aList.PushItem( picker );
}
}
for( item = m_drawList.begin(); item; item = item->Next() )
{
if( item->GetFlags() & STRUCT_DELETED )
continue;
if( item->Type() != SCH_LABEL_T )
continue;
tmp = GetWireOrBus( ( (SCH_TEXT*) item )->GetPosition() );
if( tmp && tmp->GetFlags() & STRUCT_DELETED )
{
item->SetFlags( STRUCT_DELETED );
ITEM_PICKER picker( item, UR_DELETED );
aList.PushItem( picker );
}
}
}
ClearDrawingState();
return aList.GetCount();
}
void SCH_EDIT_FRAME::OnOrient( wxCommandEvent& aEvent )
{
SCH_SCREEN* screen = GetScreen();
SCH_ITEM* item = screen->GetCurItem();
INSTALL_UNBUFFERED_DC( dc, m_canvas );
// Allows block rotate operation on hot key.
if( screen->m_BlockLocate.GetState() != STATE_NO_BLOCK )
{
if( aEvent.GetId() == ID_SCH_MIRROR_X )
{
m_canvas->MoveCursorToCrossHair();
screen->m_BlockLocate.SetMessageBlock( this );
screen->m_BlockLocate.SetCommand( BLOCK_MIRROR_X );
HandleBlockEnd( &dc );
}
else if( aEvent.GetId() == ID_SCH_MIRROR_Y )
{
m_canvas->MoveCursorToCrossHair();
screen->m_BlockLocate.SetMessageBlock( this );
screen->m_BlockLocate.SetCommand( BLOCK_MIRROR_Y );
HandleBlockEnd( &dc );
}
else
{
wxFAIL_MSG( wxT( "Unknown block oriention command ID." ) );
}
return;
}
if( item == NULL )
{
// If we didn't get here by a hot key, then something has gone wrong.
if( aEvent.GetInt() == 0 )
return;
EDA_HOTKEY_CLIENT_DATA* data = (EDA_HOTKEY_CLIENT_DATA*) aEvent.GetClientObject();
wxCHECK_RET( data != NULL, wxT( "Invalid hot key client object." ) );
item = LocateAndShowItem( data->GetPosition(), SCH_COLLECTOR::OrientableItems,
aEvent.GetInt() );
// Exit if no item found at the current location or the item is already being edited.
if( (item == NULL) || (item->GetFlags() != 0) )
return;
}
switch( item->Type() )
{
case SCH_COMPONENT_T:
if( aEvent.GetId() == ID_SCH_MIRROR_X )
OrientComponent( CMP_MIRROR_X );
else if( aEvent.GetId() == ID_SCH_MIRROR_Y )
OrientComponent( CMP_MIRROR_Y );
else if( aEvent.GetId() == ID_SCH_ORIENT_NORMAL )
OrientComponent( CMP_NORMAL );
else
wxFAIL_MSG( wxT( "Invalid orient schematic component command ID." ) );
break;
case SCH_BITMAP_T:
if( aEvent.GetId() == ID_SCH_MIRROR_X )
MirrorImage( (SCH_BITMAP*) item, true );
else if( aEvent.GetId() == ID_SCH_MIRROR_Y )
MirrorImage( (SCH_BITMAP*) item, false );
break;
default:
wxFAIL_MSG( wxString::Format( wxT( "Schematic object type %s cannot be oriented." ),
GetChars( item->GetClass() ) ) );
}
if( item->GetFlags() == 0 )
screen->SetCurItem( NULL );
}
void SCH_EDIT_FRAME::OnRotate( wxCommandEvent& aEvent )
{
SCH_SCREEN* screen = GetScreen();
SCH_ITEM* item = screen->GetCurItem();
INSTALL_UNBUFFERED_DC( dc, m_canvas );
// Allows block rotate operation on hot key.
if( screen->m_BlockLocate.GetState() != STATE_NO_BLOCK )
{
screen->m_BlockLocate.SetCommand( BLOCK_ROTATE );
HandleBlockEnd( &dc );
return;
}
if( item == NULL )
{
// If we didn't get here by a hot key, then something has gone wrong.
if( aEvent.GetInt() == 0 )
return;
EDA_HOTKEY_CLIENT_DATA* data = (EDA_HOTKEY_CLIENT_DATA*) aEvent.GetClientObject();
wxCHECK_RET( data != NULL, wxT( "Invalid hot key client object." ) );
item = LocateAndShowItem( data->GetPosition(), SCH_COLLECTOR::RotatableItems,
aEvent.GetInt() );
// Exit if no item found at the current location or the item is already being edited.
if( (item == NULL) || (item->GetFlags() != 0) )
return;
}
switch( item->Type() )
{
case SCH_COMPONENT_T:
{
SCH_COMPONENT* component = static_cast<SCH_COMPONENT*>( item );
if( aEvent.GetId() == ID_SCH_ROTATE_CLOCKWISE )
OrientComponent( CMP_ROTATE_CLOCKWISE );
else if( aEvent.GetId() == ID_SCH_ROTATE_COUNTERCLOCKWISE )
OrientComponent( CMP_ROTATE_COUNTERCLOCKWISE );
else
wxFAIL_MSG( wxT( "Unknown rotate item command ID." ) );
if( m_autoplaceFields )
component->AutoAutoplaceFields( GetScreen() );
m_canvas->Refresh();
break;
}
case SCH_TEXT_T:
case SCH_LABEL_T:
case SCH_GLOBAL_LABEL_T:
case SCH_HIERARCHICAL_LABEL_T:
m_canvas->MoveCursorToCrossHair();
ChangeTextOrient( (SCH_TEXT*) item );
m_canvas->Refresh();
break;
case SCH_FIELD_T:
m_canvas->MoveCursorToCrossHair();
RotateField( (SCH_FIELD*) item );
if( item->GetParent()->Type() == SCH_COMPONENT_T )
{
// Now that we're moving a field, they're no longer autoplaced.
SCH_COMPONENT *parent = static_cast<SCH_COMPONENT*>( item->GetParent() );
parent->ClearFieldsAutoplaced();
}
m_canvas->Refresh();
break;
case SCH_BITMAP_T:
RotateImage( (SCH_BITMAP*) item );
break;
case SCH_SHEET_T:
if( !item->IsNew() ) // rotate a sheet during its creation has no sense
{
bool retCCW = ( aEvent.GetId() == ID_SCH_ROTATE_COUNTERCLOCKWISE );
RotateHierarchicalSheet( static_cast<SCH_SHEET*>( item ), retCCW );
}
break;
case SCH_JUNCTION_T:
case SCH_NO_CONNECT_T:
// these items are not rotated, because rotation does not change them.
break;
default:
// Other items (wires...) cannot be rotated, at least during creation
if( item->IsNew() )
break;
wxFAIL_MSG( wxString::Format( wxT( "Cannot rotate schematic item type %s." ),
GetChars( item->GetClass() ) ) );
}
if( item->GetFlags() == 0 )
screen->SetCurItem( NULL );
}
void SCH_EDIT_FRAME::OnEditItem( wxCommandEvent& aEvent )
{
SCH_SCREEN* screen = GetScreen();
SCH_ITEM* item = screen->GetCurItem();
INSTALL_UNBUFFERED_DC( dc, m_canvas );
if( item == NULL )
{
// If we didn't get here by a hot key, then something has gone wrong.
if( aEvent.GetInt() == 0 )
return;
EDA_HOTKEY_CLIENT_DATA* data = (EDA_HOTKEY_CLIENT_DATA*) aEvent.GetClientObject();
wxCHECK_RET( data != NULL, wxT( "Invalid hot key client object." ) );
// Set the locat filter, according to the edit command
const KICAD_T* filterList = SCH_COLLECTOR::EditableItems;
const KICAD_T* filterListAux = NULL;
switch( aEvent.GetId() )
{
case ID_SCH_EDIT_COMPONENT_REFERENCE:
filterList = SCH_COLLECTOR::CmpFieldReferenceOnly;
filterListAux = SCH_COLLECTOR::ComponentsOnly;
break;
case ID_SCH_EDIT_COMPONENT_VALUE:
filterList = SCH_COLLECTOR::CmpFieldValueOnly;
filterListAux = SCH_COLLECTOR::ComponentsOnly;
break;
case ID_SCH_EDIT_COMPONENT_FOOTPRINT:
filterList = SCH_COLLECTOR::CmpFieldFootprintOnly;
filterListAux = SCH_COLLECTOR::ComponentsOnly;
break;
default:
break;
}
item = LocateAndShowItem( data->GetPosition(), filterList, aEvent.GetInt() );
// If no item found, and if an auxiliary filter exists, try to use it
if( !item && filterListAux )
item = LocateAndShowItem( data->GetPosition(), filterListAux, aEvent.GetInt() );
// Exit if no item found at the current location or the item is already being edited.
if( (item == NULL) || (item->GetFlags() != 0) )
return;
}
switch( item->Type() )
{
case SCH_COMPONENT_T:
{
switch( aEvent.GetId() )
{
case ID_SCH_EDIT_COMPONENT_REFERENCE:
EditComponentFieldText( ( (SCH_COMPONENT*) item )->GetField( REFERENCE ) );
break;
case ID_SCH_EDIT_COMPONENT_VALUE:
EditComponentFieldText( ( (SCH_COMPONENT*) item )->GetField( VALUE ) );
break;
case ID_SCH_EDIT_COMPONENT_FOOTPRINT:
EditComponentFieldText( ( (SCH_COMPONENT*) item )->GetField( FOOTPRINT ) );
break;
case ID_SCH_EDIT_ITEM:
EditComponent( (SCH_COMPONENT*) item );
break;
default:
wxFAIL_MSG( wxString::Format( wxT( "Invalid schematic component edit command ID %d" ),
aEvent.GetId() ) );
}
break;
}
case SCH_SHEET_T:
EditSheet( (SCH_SHEET*) item, &dc );
break;
case SCH_SHEET_PIN_T:
EditSheetPin( (SCH_SHEET_PIN*) item, &dc );
break;
case SCH_TEXT_T:
case SCH_LABEL_T:
case SCH_GLOBAL_LABEL_T:
case SCH_HIERARCHICAL_LABEL_T:
EditSchematicText( (SCH_TEXT*) item );
break;
case SCH_FIELD_T:
EditComponentFieldText( (SCH_FIELD*) item );
break;
case SCH_BITMAP_T:
EditImage( (SCH_BITMAP*) item );
break;
default:
wxFAIL_MSG( wxString::Format( wxT( "Cannot edit schematic item type %s." ),
GetChars( item->GetClass() ) ) );
}
if( item->GetFlags() == 0 )
screen->SetCurItem( NULL );
}
void SCH_EDIT_FRAME::OnDragItem( wxCommandEvent& aEvent )
{
SCH_SCREEN* screen = GetScreen();
SCH_ITEM* item = screen->GetCurItem();
INSTALL_UNBUFFERED_DC( dc, m_canvas );
if( item == NULL )
{
// If we didn't get here by a hot key, then something has gone wrong.
if( aEvent.GetInt() == 0 )
return;
EDA_HOTKEY_CLIENT_DATA* data = (EDA_HOTKEY_CLIENT_DATA*) aEvent.GetClientObject();
wxCHECK_RET( data != NULL, wxT( "Invalid hot key client object." ) );
item = LocateAndShowItem( data->GetPosition(), SCH_COLLECTOR::DraggableItems,
aEvent.GetInt() );
// Exit if no item found at the current location or the item is already being edited.
if( (item == NULL) || (item->GetFlags() != 0) )
return;
}
switch( item->Type() )
{
case SCH_BUS_BUS_ENTRY_T:
case SCH_BUS_WIRE_ENTRY_T:
case SCH_LINE_T:
case SCH_JUNCTION_T:
if( item->GetLayer() == LAYER_BUS )
break;
// Fall thru if item is not on bus layer.
case SCH_COMPONENT_T:
case SCH_LABEL_T:
case SCH_GLOBAL_LABEL_T:
case SCH_HIERARCHICAL_LABEL_T:
case SCH_SHEET_T:
m_canvas->MoveCursorToCrossHair();
// The easiest way to handle a drag component or sheet command
// is to simulate a block drag command
if( screen->m_BlockLocate.GetState() == STATE_NO_BLOCK )
{
if( !HandleBlockBegin( &dc, BLOCK_DRAG, GetCrossHairPosition() ) )
break;
// Give a non null size to the search block:
screen->m_BlockLocate.Inflate( 1 );
HandleBlockEnd( &dc );
}
break;
default:
wxFAIL_MSG( wxString::Format( wxT( "Cannot drag schematic item type %s." ),
GetChars( item->GetClass() ) ) );
}
}
void SCH_EDIT_FRAME::OnMoveItem( wxCommandEvent& aEvent )
{
SCH_SCREEN* screen = GetScreen();
SCH_ITEM* item = screen->GetCurItem();
if( screen->m_BlockLocate.GetState() != STATE_NO_BLOCK )
{
// trying to move an item when there is a block at the same time is not acceptable
return;
}
if( item == NULL )
{
// If we didn't get here by a hot key, then something has gone wrong.
if( aEvent.GetInt() == 0 )
return;
EDA_HOTKEY_CLIENT_DATA* data = (EDA_HOTKEY_CLIENT_DATA*) aEvent.GetClientObject();
wxCHECK_RET( data != NULL, wxT( "Invalid hot key client object." ) );
item = LocateAndShowItem( data->GetPosition(), SCH_COLLECTOR::MovableItems,
aEvent.GetInt() );
// Exit if no item found at the current location or the item is already being edited.
if( (item == NULL) || (item->GetFlags() != 0) )
return;
}
INSTALL_UNBUFFERED_DC( dc, m_canvas );
switch( item->Type() )
{
case SCH_LINE_T:
break;
case SCH_JUNCTION_T:
case SCH_NO_CONNECT_T:
case SCH_BUS_BUS_ENTRY_T:
case SCH_BUS_WIRE_ENTRY_T:
case SCH_LABEL_T:
case SCH_GLOBAL_LABEL_T:
case SCH_HIERARCHICAL_LABEL_T:
case SCH_TEXT_T:
case SCH_COMPONENT_T:
case SCH_SHEET_PIN_T:
case SCH_FIELD_T:
MoveItem( item, &dc );
break;
case SCH_BITMAP_T:
MoveImage( (SCH_BITMAP*) item, &dc );
break;
case SCH_SHEET_T:
StartMoveSheet( (SCH_SHEET*) item, &dc );
break;
case SCH_MARKER_T:
default:
wxFAIL_MSG( wxString::Format( wxT( "Cannot move item type %s" ),
GetChars( item->GetClass() ) ) );
break;
}
if( GetToolId() == ID_NO_TOOL_SELECTED )
SetRepeatItem( NULL );
}
void SCH_EDIT_FRAME::OnRotate( wxCommandEvent& aEvent )
{
SCH_SCREEN* screen = GetScreen();
SCH_ITEM* item = screen->GetCurItem();
INSTALL_UNBUFFERED_DC( dc, m_canvas );
// Allows block rotate operation on hot key.
if( screen->m_BlockLocate.GetState() != STATE_NO_BLOCK )
{
screen->m_BlockLocate.SetCommand( BLOCK_ROTATE );
HandleBlockEnd( &dc );
return;
}
if( item == NULL )
{
// If we didn't get here by a hot key, then something has gone wrong.
if( aEvent.GetInt() == 0 )
return;
EDA_HOTKEY_CLIENT_DATA* data = (EDA_HOTKEY_CLIENT_DATA*) aEvent.GetClientObject();
wxCHECK_RET( data != NULL, wxT( "Invalid hot key client object." ) );
item = LocateAndShowItem( data->GetPosition(), SCH_COLLECTOR::RotatableItems,
aEvent.GetInt() );
// Exit if no item found at the current location or the item is already being edited.
if( (item == NULL) || (item->GetFlags() != 0) )
return;
}
switch( item->Type() )
{
case SCH_COMPONENT_T:
if( aEvent.GetId() == ID_SCH_ROTATE_CLOCKWISE )
OrientComponent( CMP_ROTATE_CLOCKWISE );
else if( aEvent.GetId() == ID_SCH_ROTATE_COUNTERCLOCKWISE )
OrientComponent( CMP_ROTATE_COUNTERCLOCKWISE );
else
wxFAIL_MSG( wxT( "Unknown rotate item command ID." ) );
break;
case SCH_TEXT_T:
case SCH_LABEL_T:
case SCH_GLOBAL_LABEL_T:
case SCH_HIERARCHICAL_LABEL_T:
m_canvas->MoveCursorToCrossHair();
ChangeTextOrient( (SCH_TEXT*) item, &dc );
break;
case SCH_FIELD_T:
m_canvas->MoveCursorToCrossHair();
RotateField( (SCH_FIELD*) item, &dc );
break;
case SCH_BITMAP_T:
RotateImage( (SCH_BITMAP*) item );
break;
case SCH_SHEET_T: /// @todo allow sheet rotate on hotkey
default:
wxFAIL_MSG( wxString::Format( wxT( "Cannot rotate schematic item type %s." ),
GetChars( item->GetClass() ) ) );
}
if( item->GetFlags() == 0 )
screen->SetCurItem( NULL );
}
bool SCH_SCREEN::IsJunctionNeeded( const wxPoint& aPosition, bool aNew )
{
bool has_nonparallel[2] = { false };
int end_count[2] = { 0 };
int pin_count = 0;
std::vector<SCH_LINE*> lines[2];
for( SCH_ITEM* item = m_drawList.begin(); item; item = item->Next() )
{
if( item->GetFlags() & STRUCT_DELETED )
continue;
if( aNew && ( item->Type() == SCH_JUNCTION_T ) && ( item->HitTest( aPosition ) ) )
return false;
if( ( item->Type() == SCH_LINE_T )
&& ( item->HitTest( aPosition, 0 ) ) )
{
if( item->GetLayer() == LAYER_WIRE )
lines[0].push_back( (SCH_LINE*) item );
else if( item->GetLayer() == LAYER_BUS )
lines[1].push_back( (SCH_LINE*) item );
}
if( ( item->Type() == SCH_COMPONENT_T )
&& ( item->IsConnected( aPosition ) ) )
pin_count++;
}
for( int i = 0; i < 2; i++ )
{
bool removed_overlapping = false;
end_count[i] = lines[i].size();
for( auto line = lines[i].begin(); line < lines[i].end(); line++ )
{
// Consider ending on a line to be equivalent to two endpoints because
// we will want to split the line if anything else connects
if( !(*line)->IsEndPoint( aPosition ) )
end_count[i]++;
for( auto second_line = lines[i].end() - 1; second_line > line; second_line-- )
{
if( !(*line)->IsParallel( *second_line ) )
has_nonparallel[i] = true;
else if( !removed_overlapping
&& (*line)->IsSameQuadrant( *second_line, aPosition ) )
{
/**
* Overlapping lines that point in the same direction should not be counted
* as extra end_points. We remove the overlapping lines, being careful to only
* remove them once.
*/
removed_overlapping = true;
end_count[i]--;
}
}
}
}
//
// If there are three or more endpoints
if( pin_count + end_count[0] > 2 )
return true;
// If there is at least one segment that ends on a non-parallel line or
// junction of two other lines
if( has_nonparallel[0] && end_count[0] > 2 )
return true;
// Check for bus - bus junction requirements
if( has_nonparallel[1] && end_count[1] > 2 )
return true;
return false;
}
void SCH_EDIT_FRAME::OnLeftClick( wxDC* aDC, const wxPoint& aPosition )
{
SCH_ITEM* item = GetScreen()->GetCurItem();
wxPoint gridPosition = GetGridPosition( aPosition );
if( ( GetToolId() == ID_NO_TOOL_SELECTED ) || ( item && item->GetFlags() ) )
{
m_canvas->SetAutoPanRequest( false );
SetRepeatItem( NULL );
if( item && item->GetFlags() )
{
switch( item->Type() )
{
case SCH_LABEL_T:
case SCH_GLOBAL_LABEL_T:
case SCH_HIERARCHICAL_LABEL_T:
case SCH_TEXT_T:
case SCH_SHEET_PIN_T:
case SCH_SHEET_T:
case SCH_BUS_WIRE_ENTRY_T:
case SCH_BUS_BUS_ENTRY_T:
case SCH_JUNCTION_T:
case SCH_COMPONENT_T:
case SCH_FIELD_T:
case SCH_BITMAP_T:
case SCH_NO_CONNECT_T:
addCurrentItemToList();
return;
case SCH_LINE_T: // May already be drawing segment.
break;
default:
wxFAIL_MSG( wxT( "SCH_EDIT_FRAME::OnLeftClick error. Item type <" ) +
item->GetClass() + wxT( "> is already being edited." ) );
item->ClearFlags();
break;
}
}
else
{
item = LocateAndShowItem( aPosition );
}
}
switch( GetToolId() )
{
case ID_NO_TOOL_SELECTED:
break;
case ID_HIGHLIGHT:
HighlightConnectionAtPosition( aPosition );
break;
case ID_HIERARCHY_PUSH_POP_BUTT:
if( ( item && item->GetFlags() ) || ( g_RootSheet->CountSheets() == 0 ) )
break;
item = LocateAndShowItem( aPosition, SCH_COLLECTOR::SheetsOnly );
if( item ) // The user has clicked on a sheet: this is an enter sheet command
{
m_CurrentSheet->push_back( (SCH_SHEET*) item );
DisplayCurrentSheet();
}
else if( m_CurrentSheet->Last() != g_RootSheet )
{ // The user has clicked ouside a sheet:this is an leave sheet command
m_CurrentSheet->pop_back();
DisplayCurrentSheet();
}
break;
case ID_NOCONN_BUTT:
if( ( item == NULL ) || ( item->GetFlags() == 0 ) )
{
if( GetScreen()->GetItem( gridPosition, 0, SCH_NO_CONNECT_T ) == NULL )
{
SCH_NO_CONNECT* no_connect = AddNoConnect( aDC, gridPosition );
SetRepeatItem( no_connect );
GetScreen()->SetCurItem( no_connect );
m_canvas->SetAutoPanRequest( true );
}
}
else
{
addCurrentItemToList();
}
break;
case ID_JUNCTION_BUTT:
if( ( item == NULL ) || ( item->GetFlags() == 0 ) )
{
if( GetScreen()->GetItem( gridPosition, 0, SCH_JUNCTION_T ) == NULL )
{
SCH_JUNCTION* junction = AddJunction( aDC, gridPosition, true );
SetRepeatItem( junction );
GetScreen()->SetCurItem( junction );
m_canvas->SetAutoPanRequest( true );
}
}
else
{
addCurrentItemToList();
}
break;
case ID_WIRETOBUS_ENTRY_BUTT:
if( ( item == NULL ) || ( item->GetFlags() == 0 ) )
{
CreateBusWireEntry();
m_canvas->SetAutoPanRequest( true );
}
else
{
addCurrentItemToList();
}
break;
case ID_BUSTOBUS_ENTRY_BUTT:
if( ( item == NULL ) || ( item->GetFlags() == 0 ) )
{
CreateBusBusEntry();
m_canvas->SetAutoPanRequest( true );
}
else
{
addCurrentItemToList();
}
break;
case ID_SCHEMATIC_DELETE_ITEM_BUTT:
DeleteItemAtCrossHair( aDC );
break;
case ID_WIRE_BUTT:
BeginSegment( aDC, LAYER_WIRE );
m_canvas->SetAutoPanRequest( true );
break;
case ID_BUS_BUTT:
BeginSegment( aDC, LAYER_BUS );
m_canvas->SetAutoPanRequest( true );
break;
case ID_LINE_COMMENT_BUTT:
BeginSegment( aDC, LAYER_NOTES );
m_canvas->SetAutoPanRequest( true );
break;
case ID_TEXT_COMMENT_BUTT:
if( ( item == NULL ) || ( item->GetFlags() == 0 ) )
{
GetScreen()->SetCurItem( CreateNewText( aDC, LAYER_NOTES ) );
m_canvas->SetAutoPanRequest( true );
}
else
{
addCurrentItemToList();
}
break;
case ID_ADD_IMAGE_BUTT:
if( ( item == NULL ) || ( item->GetFlags() == 0 ) )
{
GetScreen()->SetCurItem( CreateNewImage( aDC ) );
m_canvas->SetAutoPanRequest( true );
}
else
{
addCurrentItemToList();
}
break;
case ID_LABEL_BUTT:
if( ( item == NULL ) || ( item->GetFlags() == 0 ) )
{
GetScreen()->SetCurItem( CreateNewText( aDC, LAYER_LOCLABEL ) );
m_canvas->SetAutoPanRequest( true );
}
else
{
addCurrentItemToList();
}
break;
case ID_GLABEL_BUTT:
case ID_HIERLABEL_BUTT:
if( (item == NULL) || (item->GetFlags() == 0) )
{
if( GetToolId() == ID_GLABEL_BUTT )
GetScreen()->SetCurItem( CreateNewText( aDC, LAYER_GLOBLABEL ) );
if( GetToolId() == ID_HIERLABEL_BUTT )
GetScreen()->SetCurItem( CreateNewText( aDC, LAYER_HIERLABEL ) );
m_canvas->SetAutoPanRequest( true );
}
else
{
addCurrentItemToList();
}
break;
case ID_SHEET_SYMBOL_BUTT:
if( ( item == NULL ) || ( item->GetFlags() == 0 ) )
{
item = CreateSheet( aDC );
if( item != NULL )
{
GetScreen()->SetCurItem( item );
m_canvas->SetAutoPanRequest( true );
}
}
else
{
addCurrentItemToList();
}
break;
case ID_IMPORT_HLABEL_BUTT:
case ID_SHEET_PIN_BUTT:
if( ( item == NULL ) || ( item->GetFlags() == 0 ) )
item = LocateAndShowItem( aPosition, SCH_COLLECTOR::SheetsAndSheetLabels );
if( item == NULL )
break;
if( (item->Type() == SCH_SHEET_T) && (item->GetFlags() == 0) )
{
if( GetToolId() == ID_IMPORT_HLABEL_BUTT )
GetScreen()->SetCurItem( ImportSheetPin( (SCH_SHEET*) item, aDC ) );
else
GetScreen()->SetCurItem( CreateSheetPin( (SCH_SHEET*) item, aDC ) );
}
else if( (item->Type() == SCH_SHEET_PIN_T) && (item->GetFlags() != 0) )
{
addCurrentItemToList();
}
break;
case ID_SCH_PLACE_COMPONENT:
if( (item == NULL) || (item->GetFlags() == 0) )
{
GetScreen()->SetCurItem( Load_Component( aDC, NULL,
s_CmpNameList, s_CmpLastUnit, true ) );
m_canvas->SetAutoPanRequest( true );
}
else
{
addCurrentItemToList();
}
break;
case ID_PLACE_POWER_BUTT:
if( ( item == NULL ) || ( item->GetFlags() == 0 ) )
{
SCHLIB_FILTER filter;
filter.FilterPowerParts( true );
GetScreen()->SetCurItem( Load_Component( aDC, &filter,
s_PowerNameList, s_LastPowerUnit, false ) );
m_canvas->SetAutoPanRequest( true );
}
else
{
addCurrentItemToList();
}
break;
#ifdef KICAD_SPICE
case ID_SIM_PROBE:
{
const KICAD_T wiresAndComponents[] = { SCH_LINE_T, SCH_COMPONENT_T, SCH_SHEET_PIN_T };
item = LocateAndShowItem( aPosition, wiresAndComponents );
if( !item )
break;
NETLIST_OBJECT_LIST* netlist = BuildNetListBase();
for( NETLIST_OBJECT* obj : *netlist )
{
if( obj->m_Comp == item )
{
SIM_PLOT_FRAME* simFrame = (SIM_PLOT_FRAME*) Kiway().Player( FRAME_SIMULATOR, false );
if( simFrame )
simFrame->AddVoltagePlot( obj->GetNetName() );
break;
}
}
}
break;
case ID_SIM_TUNE:
{
const KICAD_T fieldsAndComponents[] = { SCH_COMPONENT_T, SCH_FIELD_T };
item = LocateAndShowItem( aPosition, fieldsAndComponents );
if( !item )
return;
if( item->Type() != SCH_COMPONENT_T )
{
item = static_cast<SCH_ITEM*>( item->GetParent() );
if( item->Type() != SCH_COMPONENT_T )
return;
}
SIM_PLOT_FRAME* simFrame = (SIM_PLOT_FRAME*) Kiway().Player( FRAME_SIMULATOR, false );
if( simFrame )
simFrame->AddTuner( static_cast<SCH_COMPONENT*>( item ) );
}
break;
#endif /* KICAD_SPICE */
default:
SetToolID( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor(), wxEmptyString );
wxFAIL_MSG( wxT( "SCH_EDIT_FRAME::OnLeftClick invalid tool ID <" ) +
wxString::Format( wxT( "%d> selected." ), GetToolId() ) );
}
}
void SCH_SCREEN::SelectBlockItems()
{
auto addConnections = [ this ]( SCH_ITEM* item ) -> void
{
std::vector< wxPoint > connections;
item->GetConnectionPoints( connections );
for( auto conn : connections )
addConnectedItemsToBlock( item, conn );
};
PICKED_ITEMS_LIST* pickedlist = &m_BlockLocate.GetItems();
if( pickedlist->GetCount() == 0 )
return;
ClearDrawingState();
for( unsigned ii = 0; ii < pickedlist->GetCount(); ii++ )
{
SCH_ITEM* item = (SCH_ITEM*) pickedlist->GetPickedItem( ii );
item->SetFlags( SELECTED );
}
if( !m_BlockLocate.IsDragging() )
return;
// Select all the items in the screen connected to the items in the block.
// be sure end lines that are on the block limits are seen inside this block
m_BlockLocate.Inflate( 1 );
unsigned last_select_id = pickedlist->GetCount();
for( unsigned ii = 0; ii < last_select_id; ii++ )
{
SCH_ITEM* item = (SCH_ITEM*)pickedlist->GetPickedItem( ii );
item->SetFlags( IS_DRAGGED );
if( item->Type() == SCH_LINE_T )
{
item->IsSelectStateChanged( m_BlockLocate );
if( !item->IsSelected() )
{ // This is a special case:
// this selected wire has no ends in block.
// But it was selected (because it intersects the selecting area),
// so we must keep it selected and select items connected to it
// Note: an other option could be: remove it from drag list
item->SetFlags( SELECTED | SKIP_STRUCT );
addConnections( item );
}
pickedlist->SetPickerFlags( item->GetFlags(), ii );
}
else if( item->IsConnectable() )
{
addConnections( item );
}
}
// Select the items that are connected to a block object that was added
// to our selection list in the last step.
for( unsigned ii = last_select_id; ii < pickedlist->GetCount(); ii++ )
{
SCH_ITEM* item = (SCH_ITEM*)pickedlist->GetPickedItem( ii );
if( item->Type() == SCH_COMPONENT_T ||
item->Type() == SCH_BUS_BUS_ENTRY_T ||
item->Type() == SCH_BUS_WIRE_ENTRY_T ||
item->Type() == SCH_SHEET_T ||
( item->Type() == SCH_LINE_T && !( item->GetFlags() & ( ENDPOINT | STARTPOINT ) ) ) )
{
item->SetFlags( IS_DRAGGED );
addConnections( item );
}
}
m_BlockLocate.Inflate( -1 );
}
void SCH_EDIT_FRAME::OnLeftClick( wxDC* aDC, const wxPoint& aPosition )
{
SCH_ITEM* item = GetScreen()->GetCurItem();
wxPoint gridPosition = GetGridPosition( aPosition );
if( ( GetToolId() == ID_NO_TOOL_SELECTED ) || ( item && item->GetFlags() ) )
{
m_canvas->SetAutoPanRequest( false );
SetRepeatItem( NULL );
if( item && item->GetFlags() )
{
switch( item->Type() )
{
case SCH_LABEL_T:
case SCH_GLOBAL_LABEL_T:
case SCH_HIERARCHICAL_LABEL_T:
case SCH_TEXT_T:
case SCH_SHEET_PIN_T:
case SCH_SHEET_T:
case SCH_BUS_WIRE_ENTRY_T:
case SCH_BUS_BUS_ENTRY_T:
case SCH_JUNCTION_T:
case SCH_COMPONENT_T:
case SCH_FIELD_T:
case SCH_BITMAP_T:
case SCH_NO_CONNECT_T:
addCurrentItemToList( aDC );
return;
case SCH_LINE_T: // May already be drawing segment.
break;
default:
wxFAIL_MSG( wxT( "SCH_EDIT_FRAME::OnLeftClick error. Item type <" ) +
item->GetClass() + wxT( "> is already being edited." ) );
item->ClearFlags();
break;
}
}
else
{
item = LocateAndShowItem( aPosition );
}
}
switch( GetToolId() )
{
case ID_NO_TOOL_SELECTED:
break;
case ID_HIERARCHY_PUSH_POP_BUTT:
if( ( item && item->GetFlags() ) || ( g_RootSheet->CountSheets() == 0 ) )
break;
item = LocateAndShowItem( aPosition, SCH_COLLECTOR::SheetsOnly );
if( item ) // The user has clicked on a sheet: this is an enter sheet command
{
m_CurrentSheet->Push( (SCH_SHEET*) item );
DisplayCurrentSheet();
}
else if( m_CurrentSheet->Last() != g_RootSheet )
{ // The user has clicked ouside a sheet:this is an leave sheet command
m_CurrentSheet->Pop();
DisplayCurrentSheet();
}
break;
case ID_NOCONN_BUTT:
if( ( item == NULL ) || ( item->GetFlags() == 0 ) )
{
if( false == GetScreen()->GetItem( gridPosition, 0, SCH_NO_CONNECT_T ) )
{
SCH_NO_CONNECT* no_connect = AddNoConnect( aDC, gridPosition );
SetRepeatItem( no_connect );
GetScreen()->SetCurItem( no_connect );
m_canvas->SetAutoPanRequest( true );
}
}
else
{
addCurrentItemToList( aDC );
}
break;
case ID_JUNCTION_BUTT:
if( ( item == NULL ) || ( item->GetFlags() == 0 ) )
{
if( false == GetScreen()->GetItem( gridPosition, 0, SCH_JUNCTION_T ) )
{
SCH_JUNCTION* junction = AddJunction( aDC, gridPosition, true );
SetRepeatItem( junction );
GetScreen()->SetCurItem( junction );
m_canvas->SetAutoPanRequest( true );
}
}
else
{
addCurrentItemToList( aDC );
}
break;
case ID_WIRETOBUS_ENTRY_BUTT:
if( ( item == NULL ) || ( item->GetFlags() == 0 ) )
{
CreateBusWireEntry( aDC );
m_canvas->SetAutoPanRequest( true );
}
else
{
addCurrentItemToList( aDC );
}
break;
case ID_BUSTOBUS_ENTRY_BUTT:
if( ( item == NULL ) || ( item->GetFlags() == 0 ) )
{
CreateBusBusEntry( aDC );
m_canvas->SetAutoPanRequest( true );
}
else
{
addCurrentItemToList( aDC );
}
break;
case ID_SCHEMATIC_DELETE_ITEM_BUTT:
DeleteItemAtCrossHair( aDC );
break;
case ID_WIRE_BUTT:
BeginSegment( aDC, LAYER_WIRE );
m_canvas->SetAutoPanRequest( true );
break;
case ID_BUS_BUTT:
BeginSegment( aDC, LAYER_BUS );
m_canvas->SetAutoPanRequest( true );
break;
case ID_LINE_COMMENT_BUTT:
BeginSegment( aDC, LAYER_NOTES );
m_canvas->SetAutoPanRequest( true );
break;
case ID_TEXT_COMMENT_BUTT:
if( ( item == NULL ) || ( item->GetFlags() == 0 ) )
{
GetScreen()->SetCurItem( CreateNewText( aDC, LAYER_NOTES ) );
m_canvas->SetAutoPanRequest( true );
}
else
{
addCurrentItemToList( aDC );
}
break;
case ID_ADD_IMAGE_BUTT:
if( ( item == NULL ) || ( item->GetFlags() == 0 ) )
{
GetScreen()->SetCurItem( CreateNewImage( aDC ) );
m_canvas->SetAutoPanRequest( true );
}
else
{
addCurrentItemToList( aDC );
}
break;
case ID_LABEL_BUTT:
if( ( item == NULL ) || ( item->GetFlags() == 0 ) )
{
GetScreen()->SetCurItem( CreateNewText( aDC, LAYER_LOCLABEL ) );
m_canvas->SetAutoPanRequest( true );
}
else
{
addCurrentItemToList( aDC );
}
break;
case ID_GLABEL_BUTT:
case ID_HIERLABEL_BUTT:
if( (item == NULL) || (item->GetFlags() == 0) )
{
if( GetToolId() == ID_GLABEL_BUTT )
GetScreen()->SetCurItem( CreateNewText( aDC, LAYER_GLOBLABEL ) );
if( GetToolId() == ID_HIERLABEL_BUTT )
GetScreen()->SetCurItem( CreateNewText( aDC, LAYER_HIERLABEL ) );
m_canvas->SetAutoPanRequest( true );
}
else
{
addCurrentItemToList( aDC );
}
break;
case ID_SHEET_SYMBOL_BUTT:
if( ( item == NULL ) || ( item->GetFlags() == 0 ) )
{
item = CreateSheet( aDC );
if( item != NULL )
{
GetScreen()->SetCurItem( item );
m_canvas->SetAutoPanRequest( true );
}
}
else
{
addCurrentItemToList( aDC );
}
break;
case ID_IMPORT_HLABEL_BUTT:
case ID_SHEET_PIN_BUTT:
if( ( item == NULL ) || ( item->GetFlags() == 0 ) )
item = LocateAndShowItem( aPosition, SCH_COLLECTOR::SheetsAndSheetLabels );
if( item == NULL )
break;
if( (item->Type() == SCH_SHEET_T) && (item->GetFlags() == 0) )
{
if( GetToolId() == ID_IMPORT_HLABEL_BUTT )
GetScreen()->SetCurItem( ImportSheetPin( (SCH_SHEET*) item, aDC ) );
else
GetScreen()->SetCurItem( CreateSheetPin( (SCH_SHEET*) item, aDC ) );
}
else if( (item->Type() == SCH_SHEET_PIN_T) && (item->GetFlags() != 0) )
{
addCurrentItemToList( aDC );
}
break;
case ID_SCH_PLACE_COMPONENT:
if( (item == NULL) || (item->GetFlags() == 0) )
{
GetScreen()->SetCurItem( Load_Component( aDC, wxEmptyString,
s_CmpNameList, s_CmpLastUnit, true ) );
m_canvas->SetAutoPanRequest( true );
}
else
{
addCurrentItemToList( aDC );
}
break;
case ID_PLACE_POWER_BUTT:
if( ( item == NULL ) || ( item->GetFlags() == 0 ) )
{
GetScreen()->SetCurItem( Load_Component( aDC, wxT( "power" ),
s_PowerNameList, s_LastPowerUnit, false ) );
m_canvas->SetAutoPanRequest( true );
}
else
{
addCurrentItemToList( aDC );
}
break;
default:
SetToolID( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor(), wxEmptyString );
wxFAIL_MSG( wxT( "SCH_EDIT_FRAME::OnLeftClick invalid tool ID <" ) +
wxString::Format( wxT( "%d> selected." ), GetToolId() ) );
}
}
void SCH_SCREEN::addConnectedItemsToBlock( const SCH_ITEM* aItem, const wxPoint& position )
{
SCH_ITEM* item;
ITEM_PICKER picker;
for( item = m_drawList.begin(); item; item = item->Next() )
{
if( !item->IsConnectable() || ( item->GetFlags() & SKIP_STRUCT )
|| !item->CanConnect( aItem ) || item == aItem )
continue;
// A line having 2 ends, it can be tested twice: one time per end
if( item->Type() == SCH_LINE_T )
{
SCH_LINE* line = (SCH_LINE*) item;
if( !item->HitTest( position ) )
continue;
// First time through. Flags set to denote an end that is not moving
if( !item->IsSelected() )
item->SetFlags( CANDIDATE | STARTPOINT | ENDPOINT );
if( line->GetStartPoint() == position )
item->ClearFlags( STARTPOINT );
else if( line->GetEndPoint() == position )
item->ClearFlags( ENDPOINT );
else
// This picks up items such as labels that can connect to the middle of a line
item->ClearFlags( STARTPOINT | ENDPOINT );
}
// We want to move a mid-connected label or bus entry when the full line is being moved
else if( !item->IsSelected()
&& aItem->Type() == SCH_LINE_T
&& !( aItem->GetFlags() & ( ENDPOINT | STARTPOINT ) ) )
{
std::vector< wxPoint > connections;
item->GetConnectionPoints( connections );
for( auto conn : connections )
{
if( aItem->HitTest( conn ) )
{
item->SetFlags( CANDIDATE );
break;
}
}
}
if( item->IsSelected() )
continue;
if( ( item->GetFlags() & CANDIDATE ) || item->IsConnected( position ) ) // Deal with all non-line items
{
item->ClearFlags( CANDIDATE );
item->SetFlags( SELECTED );
picker.SetItem( item );
picker.SetFlags( item->GetFlags() );
m_BlockLocate.GetItems().PushItem( picker );
}
}
}