/*
* Analyze filter-quality and matrix, and decide how to implement that.
*
* In general, we cascade down the request level [ High ... None ]
* - for a given level, if we can fulfill it, fine, else
* - else we downgrade to the next lower level and try again.
* We can always fulfill requests for Low and None
* - sometimes we will "ignore" Low and give None, but this is likely a legacy perf hack
* and may be removed.
*/
bool SkBitmapProcState::chooseProcs(const SkMatrix& inv, const SkPaint& paint) {
fPixmap.reset();
fInvMatrix = inv;
fFilterLevel = paint.getFilterQuality();
const int origW = fProvider.info().width();
const int origH = fProvider.info().height();
bool allow_ignore_fractional_translate = true; // historical default
if (kMedium_SkFilterQuality == fFilterLevel) {
allow_ignore_fractional_translate = false;
}
SkDefaultBitmapController controller;
fBMState = controller.requestBitmap(fProvider, inv, paint.getFilterQuality(),
fBMStateStorage.get(), fBMStateStorage.size());
// Note : we allow the controller to return an empty (zero-dimension) result. Should we?
if (nullptr == fBMState || fBMState->pixmap().info().isEmpty()) {
return false;
}
fPixmap = fBMState->pixmap();
fInvMatrix = fBMState->invMatrix();
fFilterLevel = fBMState->quality();
SkASSERT(fPixmap.addr());
bool trivialMatrix = (fInvMatrix.getType() & ~SkMatrix::kTranslate_Mask) == 0;
bool clampClamp = SkShader::kClamp_TileMode == fTileModeX &&
SkShader::kClamp_TileMode == fTileModeY;
// Most of the scanline procs deal with "unit" texture coordinates, as this
// makes it easy to perform tiling modes (repeat = (x & 0xFFFF)). To generate
// those, we divide the matrix by its dimensions here.
//
// We don't do this if we're either trivial (can ignore the matrix) or clamping
// in both X and Y since clamping to width,height is just as easy as to 0xFFFF.
if (!(clampClamp || trivialMatrix)) {
fInvMatrix.postIDiv(fPixmap.width(), fPixmap.height());
}
// Now that all possible changes to the matrix have taken place, check
// to see if we're really close to a no-scale matrix. If so, explicitly
// set it to be so. Subsequent code may inspect this matrix to choose
// a faster path in this case.
// This code will only execute if the matrix has some scale component;
// if it's already pure translate then we won't do this inversion.
if (matrix_only_scale_translate(fInvMatrix)) {
SkMatrix forward;
if (fInvMatrix.invert(&forward)) {
if ((clampClamp && allow_ignore_fractional_translate)
? just_trans_clamp(forward, fPixmap)
: just_trans_general(forward)) {
fInvMatrix.setTranslate(-forward.getTranslateX(), -forward.getTranslateY());
}
}
}
fInvProc = fInvMatrix.getMapXYProc();
fInvType = fInvMatrix.getType();
fInvSx = SkScalarToFixed(fInvMatrix.getScaleX());
fInvSxFractionalInt = SkScalarToFractionalInt(fInvMatrix.getScaleX());
fInvKy = SkScalarToFixed(fInvMatrix.getSkewY());
fInvKyFractionalInt = SkScalarToFractionalInt(fInvMatrix.getSkewY());
fAlphaScale = SkAlpha255To256(paint.getAlpha());
fShaderProc32 = nullptr;
fShaderProc16 = nullptr;
fSampleProc32 = nullptr;
// recompute the triviality of the matrix here because we may have
// changed it!
trivialMatrix = (fInvMatrix.getType() & ~SkMatrix::kTranslate_Mask) == 0;
// If our target pixmap is the same as the original, then we revert back to legacy behavior
// and allow the code to ignore fractional translate.
//
// The width/height check allows allow_ignore_fractional_translate to stay false if we
// previously set it that way (e.g. we started in kMedium).
//
if (fPixmap.width() == origW && fPixmap.height() == origH) {
allow_ignore_fractional_translate = true;
}
if (kLow_SkFilterQuality == fFilterLevel && allow_ignore_fractional_translate) {
// Only try bilerp if the matrix is "interesting" and
// the image has a suitable size.
if (fInvType <= SkMatrix::kTranslate_Mask ||
!valid_for_filtering(fPixmap.width() | fPixmap.height()))
{
fFilterLevel = kNone_SkFilterQuality;
}
}
return this->chooseScanlineProcs(trivialMatrix, clampClamp, paint);
}
SK_DEFINE_FLATTENABLE_REGISTRAR_GROUP_END
bool SkImageShader::onAppendStages(const StageRec& rec) const {
SkRasterPipeline* p = rec.fPipeline;
SkArenaAlloc* alloc = rec.fAlloc;
SkMatrix matrix;
if (!this->computeTotalInverse(rec.fCTM, rec.fLocalM, &matrix)) {
return false;
}
auto quality = rec.fPaint.getFilterQuality();
SkBitmapProvider provider(fImage.get(), rec.fDstCS);
SkDefaultBitmapController controller;
std::unique_ptr<SkBitmapController::State> state {
controller.requestBitmap(provider, matrix, quality)
};
if (!state) {
return false;
}
const SkPixmap& pm = state->pixmap();
matrix = state->invMatrix();
quality = state->quality();
auto info = pm.info();
// When the matrix is just an integer translate, bilerp == nearest neighbor.
if (quality == kLow_SkFilterQuality &&
matrix.getType() <= SkMatrix::kTranslate_Mask &&
matrix.getTranslateX() == (int)matrix.getTranslateX() &&
matrix.getTranslateY() == (int)matrix.getTranslateY()) {
quality = kNone_SkFilterQuality;
}
// See skia:4649 and the GM image_scale_aligned.
if (quality == kNone_SkFilterQuality) {
if (matrix.getScaleX() >= 0) {
matrix.setTranslateX(nextafterf(matrix.getTranslateX(),
floorf(matrix.getTranslateX())));
}
if (matrix.getScaleY() >= 0) {
matrix.setTranslateY(nextafterf(matrix.getTranslateY(),
floorf(matrix.getTranslateY())));
}
}
p->append(SkRasterPipeline::seed_shader);
struct MiscCtx {
std::unique_ptr<SkBitmapController::State> state;
SkColor4f paint_color;
};
auto misc = alloc->make<MiscCtx>();
misc->state = std::move(state); // Extend lifetime to match the pipeline's.
misc->paint_color = SkColor4f_from_SkColor(rec.fPaint.getColor(), rec.fDstCS);
p->append_matrix(alloc, matrix);
auto gather = alloc->make<SkJumper_GatherCtx>();
gather->pixels = pm.addr();
gather->stride = pm.rowBytesAsPixels();
gather->width = pm.width();
gather->height = pm.height();
auto limit_x = alloc->make<SkJumper_TileCtx>(),
limit_y = alloc->make<SkJumper_TileCtx>();
limit_x->scale = pm.width();
limit_x->invScale = 1.0f / pm.width();
limit_y->scale = pm.height();
limit_y->invScale = 1.0f / pm.height();
bool is_srgb = rec.fDstCS && (!info.colorSpace() || info.gammaCloseToSRGB());
SkJumper_DecalTileCtx* decal_ctx = nullptr;
bool decal_x_and_y = fTileModeX == kDecal_TileMode && fTileModeY == kDecal_TileMode;
if (fTileModeX == kDecal_TileMode || fTileModeY == kDecal_TileMode) {
decal_ctx = alloc->make<SkJumper_DecalTileCtx>();
decal_ctx->limit_x = limit_x->scale;
decal_ctx->limit_y = limit_y->scale;
}
auto append_tiling_and_gather = [&] {
if (decal_x_and_y) {
p->append(SkRasterPipeline::decal_x_and_y, decal_ctx);
} else {
switch (fTileModeX) {
case kClamp_TileMode: /* The gather_xxx stage will clamp for us. */ break;
case kMirror_TileMode: p->append(SkRasterPipeline::mirror_x, limit_x); break;
case kRepeat_TileMode: p->append(SkRasterPipeline::repeat_x, limit_x); break;
case kDecal_TileMode: p->append(SkRasterPipeline::decal_x, decal_ctx); break;
}
switch (fTileModeY) {
case kClamp_TileMode: /* The gather_xxx stage will clamp for us. */ break;
case kMirror_TileMode: p->append(SkRasterPipeline::mirror_y, limit_y); break;
case kRepeat_TileMode: p->append(SkRasterPipeline::repeat_y, limit_y); break;
case kDecal_TileMode: p->append(SkRasterPipeline::decal_y, decal_ctx); break;
}
}
void* ctx = gather;
switch (info.colorType()) {
case kAlpha_8_SkColorType: p->append(SkRasterPipeline::gather_a8, ctx); break;
case kGray_8_SkColorType: p->append(SkRasterPipeline::gather_g8, ctx); break;
case kRGB_565_SkColorType: p->append(SkRasterPipeline::gather_565, ctx); break;
case kARGB_4444_SkColorType: p->append(SkRasterPipeline::gather_4444, ctx); break;
case kBGRA_8888_SkColorType: p->append(SkRasterPipeline::gather_bgra, ctx); break;
case kRGBA_8888_SkColorType: p->append(SkRasterPipeline::gather_8888, ctx); break;
case kRGBA_1010102_SkColorType: p->append(SkRasterPipeline::gather_1010102, ctx); break;
case kRGBA_F16_SkColorType: p->append(SkRasterPipeline::gather_f16, ctx); break;
case kRGB_888x_SkColorType: p->append(SkRasterPipeline::gather_8888, ctx);
p->append(SkRasterPipeline::force_opaque ); break;
case kRGB_101010x_SkColorType: p->append(SkRasterPipeline::gather_1010102, ctx);
p->append(SkRasterPipeline::force_opaque ); break;
default: SkASSERT(false);
}
if (decal_ctx) {
p->append(SkRasterPipeline::check_decal_mask, decal_ctx);
}
if (is_srgb) {
p->append(SkRasterPipeline::from_srgb);
}
};
auto append_misc = [&] {
if (info.colorType() == kAlpha_8_SkColorType) {
p->append(SkRasterPipeline::set_rgb, &misc->paint_color);
}
if (info.colorType() == kAlpha_8_SkColorType ||
info.alphaType() == kUnpremul_SkAlphaType) {
p->append(SkRasterPipeline::premul);
}
if (quality > kLow_SkFilterQuality) {
// Bicubic filtering naturally produces out of range values on both sides.
p->append(SkRasterPipeline::clamp_0);
p->append(fClampAsIfUnpremul ? SkRasterPipeline::clamp_1
: SkRasterPipeline::clamp_a);
}
append_gamut_transform(p, alloc, info.colorSpace(), rec.fDstCS,
fClampAsIfUnpremul ? kUnpremul_SkAlphaType : kPremul_SkAlphaType);
return true;
};
// We've got a fast path for 8888 bilinear clamp/clamp non-color-managed sampling.
auto ct = info.colorType();
if (true
&& (ct == kRGBA_8888_SkColorType || ct == kBGRA_8888_SkColorType)
&& quality == kLow_SkFilterQuality
&& fTileModeX == SkShader::kClamp_TileMode
&& fTileModeY == SkShader::kClamp_TileMode
&& !is_srgb) {
p->append(SkRasterPipeline::bilerp_clamp_8888, gather);
if (ct == kBGRA_8888_SkColorType) {
p->append(SkRasterPipeline::swap_rb);
}
return append_misc();
}
SkJumper_SamplerCtx* sampler = nullptr;
if (quality != kNone_SkFilterQuality) {
sampler = alloc->make<SkJumper_SamplerCtx>();
}
auto sample = [&](SkRasterPipeline::StockStage setup_x,
SkRasterPipeline::StockStage setup_y) {
p->append(setup_x, sampler);
p->append(setup_y, sampler);
append_tiling_and_gather();
p->append(SkRasterPipeline::accumulate, sampler);
};
if (quality == kNone_SkFilterQuality) {
append_tiling_and_gather();
} else if (quality == kLow_SkFilterQuality) {
p->append(SkRasterPipeline::save_xy, sampler);
sample(SkRasterPipeline::bilinear_nx, SkRasterPipeline::bilinear_ny);
sample(SkRasterPipeline::bilinear_px, SkRasterPipeline::bilinear_ny);
sample(SkRasterPipeline::bilinear_nx, SkRasterPipeline::bilinear_py);
sample(SkRasterPipeline::bilinear_px, SkRasterPipeline::bilinear_py);
p->append(SkRasterPipeline::move_dst_src);
} else {
p->append(SkRasterPipeline::save_xy, sampler);
sample(SkRasterPipeline::bicubic_n3x, SkRasterPipeline::bicubic_n3y);
sample(SkRasterPipeline::bicubic_n1x, SkRasterPipeline::bicubic_n3y);
sample(SkRasterPipeline::bicubic_p1x, SkRasterPipeline::bicubic_n3y);
sample(SkRasterPipeline::bicubic_p3x, SkRasterPipeline::bicubic_n3y);
sample(SkRasterPipeline::bicubic_n3x, SkRasterPipeline::bicubic_n1y);
sample(SkRasterPipeline::bicubic_n1x, SkRasterPipeline::bicubic_n1y);
sample(SkRasterPipeline::bicubic_p1x, SkRasterPipeline::bicubic_n1y);
sample(SkRasterPipeline::bicubic_p3x, SkRasterPipeline::bicubic_n1y);
sample(SkRasterPipeline::bicubic_n3x, SkRasterPipeline::bicubic_p1y);
sample(SkRasterPipeline::bicubic_n1x, SkRasterPipeline::bicubic_p1y);
sample(SkRasterPipeline::bicubic_p1x, SkRasterPipeline::bicubic_p1y);
sample(SkRasterPipeline::bicubic_p3x, SkRasterPipeline::bicubic_p1y);
sample(SkRasterPipeline::bicubic_n3x, SkRasterPipeline::bicubic_p3y);
sample(SkRasterPipeline::bicubic_n1x, SkRasterPipeline::bicubic_p3y);
sample(SkRasterPipeline::bicubic_p1x, SkRasterPipeline::bicubic_p3y);
sample(SkRasterPipeline::bicubic_p3x, SkRasterPipeline::bicubic_p3y);
p->append(SkRasterPipeline::move_dst_src);
}
return append_misc();
}
