/**
@see DVBT_NIM_FP_INITIALIZE
*/
int
rtl2832_fc2580_Initialize(
DVBT_NIM_MODULE *pNim
)
{
typedef struct
{
int RegBitName;
unsigned long Value;
}
REG_VALUE_ENTRY;
static const REG_VALUE_ENTRY AdditionalInitRegValueTable[RTL2832_FC2580_ADDITIONAL_INIT_REG_TABLE_LEN] =
{
// RegBitName, Value
{DVBT_DAGC_TRG_VAL, 0x39 },
{DVBT_AGC_TARG_VAL_0, 0x0 },
{DVBT_AGC_TARG_VAL_8_1, 0x5a },
{DVBT_AAGC_LOOP_GAIN, 0x16 },
{DVBT_LOOP_GAIN2_3_0, 0x6 },
{DVBT_LOOP_GAIN2_4, 0x1 },
{DVBT_LOOP_GAIN3, 0x16 },
{DVBT_VTOP1, 0x35 },
{DVBT_VTOP2, 0x21 },
{DVBT_VTOP3, 0x21 },
{DVBT_KRF1, 0x0 },
{DVBT_KRF2, 0x40 },
{DVBT_KRF3, 0x10 },
{DVBT_KRF4, 0x10 },
{DVBT_IF_AGC_MIN, 0x80 },
{DVBT_IF_AGC_MAX, 0x7f },
{DVBT_RF_AGC_MIN, 0x9c },
{DVBT_RF_AGC_MAX, 0x7f },
{DVBT_POLAR_RF_AGC, 0x0 },
{DVBT_POLAR_IF_AGC, 0x0 },
{DVBT_AD7_SETTING, 0xe9f4 },
};
TUNER_MODULE *pTuner;
DVBT_DEMOD_MODULE *pDemod;
int i;
int RegBitName;
unsigned long Value;
// Get tuner module and demod module.
pTuner = pNim->pTuner;
pDemod = pNim->pDemod;
// Enable demod DVBT_IIC_REPEAT.
if(pDemod->SetRegBitsWithPage(pDemod, DVBT_IIC_REPEAT, 0x1) != FUNCTION_SUCCESS)
goto error_status_set_registers;
// Initialize tuner.
if(pTuner->Initialize(pTuner) != FUNCTION_SUCCESS)
goto error_status_execute_function;
// Disable demod DVBT_IIC_REPEAT.
if(pDemod->SetRegBitsWithPage(pDemod, DVBT_IIC_REPEAT, 0x0) != FUNCTION_SUCCESS)
goto error_status_set_registers;
// Initialize demod.
if(pDemod->Initialize(pDemod) != FUNCTION_SUCCESS)
goto error_status_execute_function;
// Set demod IF frequency with 0 Hz.
if(pDemod->SetIfFreqHz(pDemod, IF_FREQ_0HZ) != FUNCTION_SUCCESS)
goto error_status_execute_function;
// Set demod spectrum mode with SPECTRUM_NORMAL.
if(pDemod->SetSpectrumMode(pDemod, SPECTRUM_NORMAL) != FUNCTION_SUCCESS)
goto error_status_execute_function;
// Set demod registers.
for(i = 0; i < RTL2832_FC2580_ADDITIONAL_INIT_REG_TABLE_LEN; i++)
{
// Get register bit name and its value.
RegBitName = AdditionalInitRegValueTable[i].RegBitName;
Value = AdditionalInitRegValueTable[i].Value;
// Set demod registers
if(pDemod->SetRegBitsWithPage(pDemod, RegBitName, Value) != FUNCTION_SUCCESS)
goto error_status_set_registers;
}
// Set TS interface according to TS interface mode.
switch(pNim->DemodTsInterfaceMode)
{
case TS_INTERFACE_PARALLEL:
// Set demod TS interface with parallel mode.
if(pDemod->SetRegBitsWithPage(pDemod, DVBT_SERIAL, 0) != FUNCTION_SUCCESS)
goto error_status_set_registers;
if(pDemod->SetRegBitsWithPage(pDemod, DVBT_CDIV_PH0, 9) != FUNCTION_SUCCESS)
goto error_status_set_registers;
if(pDemod->SetRegBitsWithPage(pDemod, DVBT_CDIV_PH1, 9) != FUNCTION_SUCCESS)
goto error_status_set_registers;
break;
default:
case TS_INTERFACE_SERIAL:
// Set demod TS interface with serial mode.
if(pDemod->SetRegBitsWithPage(pDemod, DVBT_SERIAL, 1) != FUNCTION_SUCCESS)
goto error_status_set_registers;
if(pDemod->SetRegBitsWithPage(pDemod, DVBT_CDIV_PH0, 2) != FUNCTION_SUCCESS)
goto error_status_set_registers;
if(pDemod->SetRegBitsWithPage(pDemod, DVBT_CDIV_PH1, 2) != FUNCTION_SUCCESS)
goto error_status_set_registers;
break;
}
return FUNCTION_SUCCESS;
error_status_execute_function:
error_status_set_registers:
return FUNCTION_ERROR;
}
/**
@see DTMB_NIM_FP_INITIALIZE
*/
s32
rtl2836_mxl5007t_Initialize(
DTMB_NIM_MODULE *pNim
)
{
typedef struct
{
s32 RegBitName;
u64 Value;
}
REG_VALUE_ENTRY;
static const REG_VALUE_ENTRY AdditionalInitRegValueTable[RTL2836_MXL5007T_ADDITIONAL_INIT_REG_TABLE_LEN] =
{
// RegBitName, Value
{DTMB_TARGET_VAL, 0x38 },
};
TUNER_MODULE *pTuner;
DTMB_DEMOD_MODULE *pDemod;
MXL5007T_EXTRA_MODULE *pTunerExtra;
s32 i;
s32 RegBitName;
u64 Value;
// Get tuner module and demod module.
pTuner = pNim->pTuner;
pDemod = pNim->pDemod;
// Get tuner extra module.
pTunerExtra = &(pTuner->Extra.Mxl5007t);
// Enable demod DTMB_I2CT_EN_CTRL.
if(pDemod->RegAccess.Addr8Bit.SetRegBitsWithPage(pDemod, DTMB_I2CT_EN_CTRL, 0x1) != FUNCTION_SUCCESS)
goto error_status_set_registers;
// Initialize tuner.
if(pTuner->Initialize(pTuner) != FUNCTION_SUCCESS)
goto error_status_execute_function;
// Set tuner bandwidth mode with 8 MHz.
if(pTunerExtra->SetBandwidthMode(pTuner, MXL5007T_BANDWIDTH_8000000HZ) != FUNCTION_SUCCESS)
goto error_status_execute_function;
// Disable demod DTMB_I2CT_EN_CTRL.
if(pDemod->RegAccess.Addr8Bit.SetRegBitsWithPage(pDemod, DTMB_I2CT_EN_CTRL, 0x0) != FUNCTION_SUCCESS)
goto error_status_set_registers;
// Initialize demod.
if(pDemod->Initialize(pDemod) != FUNCTION_SUCCESS)
goto error_status_execute_function;
// Set demod IF frequency with NIM default.
if(pDemod->SetIfFreqHz(pDemod, RTL2836_MXL5007T_IF_FREQ_HZ_DEFAULT) != FUNCTION_SUCCESS)
goto error_status_execute_function;
// Set demod spectrum mode with NIM default.
if(pDemod->SetSpectrumMode(pDemod, RTL2836_MXL5007T_SPECTRUM_MODE_DEFAULT) != FUNCTION_SUCCESS)
goto error_status_execute_function;
// Set demod registers.
for(i = 0; i < RTL2836_MXL5007T_ADDITIONAL_INIT_REG_TABLE_LEN; i++)
{
// Get register bit name and its value.
RegBitName = AdditionalInitRegValueTable[i].RegBitName;
Value = AdditionalInitRegValueTable[i].Value;
// Set demod registers
if(pDemod->RegAccess.Addr8Bit.SetRegBitsWithPage(pDemod, RegBitName, Value) != FUNCTION_SUCCESS)
goto error_status_set_registers;
}
return FUNCTION_SUCCESS;
error_status_execute_function:
error_status_set_registers:
return FUNCTION_ERROR;
}
/**
* @see DVBT_NIM_FP_INITIALIZE
*/
s32 rtl2832_tda18272_Initialize(DVBT_NIM_MODULE *pNim)
{
typedef struct
{
s32 RegBitName;
u64 Value;
}
REG_VALUE_ENTRY;
static const REG_VALUE_ENTRY AdditionalInitRegValueTable[RTL2832_TDA18272_ADDITIONAL_INIT_REG_TABLE_LEN] =
{
// RegBitName, Value
{DVBT_DAGC_TRG_VAL, 0x39 },
{DVBT_AGC_TARG_VAL_0, 0x0 },
{DVBT_AGC_TARG_VAL_8_1, 0x40 },
{DVBT_AAGC_LOOP_GAIN, 0x16 },
{DVBT_LOOP_GAIN2_3_0, 0x8 },
{DVBT_LOOP_GAIN2_4, 0x1 },
{DVBT_LOOP_GAIN3, 0x18 },
{DVBT_VTOP1, 0x35 },
{DVBT_VTOP2, 0x21 },
{DVBT_VTOP3, 0x21 },
{DVBT_KRF1, 0x0 },
{DVBT_KRF2, 0x40 },
{DVBT_KRF3, 0x10 },
{DVBT_KRF4, 0x10 },
{DVBT_IF_AGC_MIN, 0x80 },
{DVBT_IF_AGC_MAX, 0x7f },
{DVBT_RF_AGC_MIN, 0x80 },
{DVBT_RF_AGC_MAX, 0x7f },
{DVBT_POLAR_RF_AGC, 0x0 },
{DVBT_POLAR_IF_AGC, 0x0 },
{DVBT_AD7_SETTING, 0xe9f4 },
};
TUNER_MODULE *pTuner;
DVBT_DEMOD_MODULE *pDemod;
s32 i;
s32 RegBitName;
u64 Value;
// Get tuner module and demod module.
pTuner = pNim->pTuner;
pDemod = pNim->pDemod;
// Enable demod DVBT_IIC_REPEAT.
if(pDemod->SetRegBitsWithPage(pDemod, DVBT_IIC_REPEAT, 0x1) != FUNCTION_SUCCESS)
goto error_status_set_registers;
// Initialize tuner.
if(pTuner->Initialize(pTuner) != FUNCTION_SUCCESS)
goto error_status_execute_function;
// Disable demod DVBT_IIC_REPEAT.
if(pDemod->SetRegBitsWithPage(pDemod, DVBT_IIC_REPEAT, 0x0) != FUNCTION_SUCCESS)
goto error_status_set_registers;
// Initialize demod.
// Note: TDA18272 tuner uses dynamic IF frequency, so we will set demod IF frequency in SetParameters().
if(pDemod->Initialize(pDemod) != FUNCTION_SUCCESS)
goto error_status_execute_function;
// Set demod spectrum mode with SPECTRUM_INVERSE.
if(pDemod->SetSpectrumMode(pDemod, SPECTRUM_INVERSE) != FUNCTION_SUCCESS)
goto error_status_execute_function;
// Set demod registers.
for(i = 0; i < RTL2832_TDA18272_ADDITIONAL_INIT_REG_TABLE_LEN; i++)
{
// Get register bit name and its value.
RegBitName = AdditionalInitRegValueTable[i].RegBitName;
Value = AdditionalInitRegValueTable[i].Value;
// Set demod registers
if(pDemod->SetRegBitsWithPage(pDemod, RegBitName, Value) != FUNCTION_SUCCESS)
goto error_status_set_registers;
}
return FUNCTION_SUCCESS;
error_status_execute_function:
error_status_set_registers:
return FUNCTION_ERROR;
}
/**
@see DTMB_NIM_FP_INITIALIZE
*/
int
rtl2836b_dtmb_va1e1ed2403_Initialize(
DTMB_NIM_MODULE *pNim
)
{
typedef struct
{
int RegBitName;
unsigned long Value;
}
REG_VALUE_ENTRY;
static const REG_VALUE_ENTRY AdditionalInitRegValueTable[RTL2836B_DTMB_VA1E1ED2403_ADDITIONAL_INIT_REG_TABLE_LEN] =
{
// RegBitName, Value
{DTMB_AGC_DRIVE_LV, 0x0 },
{DTMB_Z_AGC, 0x1 },
{DTMB_EN_PGA_MODE, 0x0 },
{DTMB_TARGET_VAL, 0x38 },
{DTMB_AAGC_LOOPGAIN1, 0x15 },
{DTMB_INTEGRAL_CNT_LEN, 0xc },
{DTMB_AAGC_LOCK_PGA_HIT_LEN, 0x1 },
{DTMB_THD_LOCK_UP, 0x205 },
{DTMB_THD_LOCK_DW, 0x1fb },
{DTMB_THD_UP1, 0x205 },
{DTMB_THD_DW1, 0x1fb },
{DTMB_THD_UP2, 0x86 },
{DTMB_THD_DW2, 0x7a },
{DTMB_GAIN_PULSE_SPACE_LEN, 0x1 },
{DTMB_GAIN_PULSE_HOLD_LEN, 0x1 },
{DTMB_GAIN_STEP_SUM_UP_THD, 0xb },
{DTMB_GAIN_STEP_SUM_DW_THD, 0x5 },
};
TUNER_MODULE *pTuner;
DTMB_DEMOD_MODULE *pDemod;
int i;
int RegBitName;
unsigned long Value;
// Get tuner module and demod module.
pTuner = pNim->pTuner;
pDemod = pNim->pDemod;
// Enable demod DTMB_I2CT_EN_CTRL.
if(pDemod->RegAccess.Addr16Bit.SetRegBits(pDemod, DTMB_I2CT_EN_CTRL, 0x1) != FUNCTION_SUCCESS)
goto error_status_set_registers;
// Initialize tuner.
if(pTuner->Initialize(pTuner) != FUNCTION_SUCCESS)
goto error_status_execute_function;
// Disable demod DTMB_I2CT_EN_CTRL.
if(pDemod->RegAccess.Addr16Bit.SetRegBits(pDemod, DTMB_I2CT_EN_CTRL, 0x0) != FUNCTION_SUCCESS)
goto error_status_set_registers;
// Initialize demod.
if(pDemod->Initialize(pDemod) != FUNCTION_SUCCESS)
goto error_status_execute_function;
// Set demod IF frequency with 36 MHz.
if(pDemod->SetIfFreqHz(pDemod, IF_FREQ_36000000HZ) != FUNCTION_SUCCESS)
goto error_status_execute_function;
// Set demod spectrum mode with SPECTRUM_NORMAL.
if(pDemod->SetSpectrumMode(pDemod, SPECTRUM_NORMAL) != FUNCTION_SUCCESS)
goto error_status_execute_function;
// Set demod registers.
for(i = 0; i < RTL2836B_DTMB_VA1E1ED2403_ADDITIONAL_INIT_REG_TABLE_LEN; i++)
{
// Get register bit name and its value.
RegBitName = AdditionalInitRegValueTable[i].RegBitName;
Value = AdditionalInitRegValueTable[i].Value;
// Set demod registers
if(pDemod->RegAccess.Addr16Bit.SetRegBits(pDemod, RegBitName, Value) != FUNCTION_SUCCESS)
goto error_status_set_registers;
}
return FUNCTION_SUCCESS;
error_status_execute_function:
error_status_set_registers:
return FUNCTION_ERROR;
}
/**
@see DVBT_NIM_FP_INITIALIZE
*/
int
rtl2832_max3543_Initialize(
DVBT_NIM_MODULE *pNim
)
{
typedef struct
{
int RegBitName;
unsigned long Value;
}
REG_VALUE_ENTRY;
static const REG_VALUE_ENTRY AdditionalInitRegValueTable[RTL2832_MAX3543_ADDITIONAL_INIT_REG_TABLE_LEN] =
{
// RegBitName, Value
{DVBT_DAGC_TRG_VAL, 0x39 },
{DVBT_AGC_TARG_VAL_0, 0x0 },
{DVBT_AGC_TARG_VAL_8_1, 0x4b },
{DVBT_AAGC_LOOP_GAIN, 0x16 },
{DVBT_LOOP_GAIN2_3_0, 0x6 },
{DVBT_LOOP_GAIN2_4, 0x1 },
{DVBT_LOOP_GAIN3, 0x16 },
{DVBT_VTOP1, 0x35 },
{DVBT_VTOP2, 0x21 },
{DVBT_VTOP3, 0x21 },
{DVBT_KRF1, 0x0 },
{DVBT_KRF2, 0x40 },
{DVBT_KRF3, 0x10 },
{DVBT_KRF4, 0x10 },
{DVBT_IF_AGC_MIN, 0x80 },
{DVBT_IF_AGC_MAX, 0x7f },
{DVBT_RF_AGC_MIN, 0x80 },
{DVBT_RF_AGC_MAX, 0x7f },
{DVBT_POLAR_RF_AGC, 0x0 },
{DVBT_POLAR_IF_AGC, 0x0 },
{DVBT_AD7_SETTING, 0xe9d4 },
{DVBT_AD_EN_REG1, 0x0 },
{DVBT_CKOUT_PWR_PID, 0x0 },
};
TUNER_MODULE *pTuner;
DVBT_DEMOD_MODULE *pDemod;
int i;
int RegBitName;
unsigned long Value;
// Get tuner module and demod module.
pTuner = pNim->pTuner;
pDemod = pNim->pDemod;
// Enable demod DVBT_IIC_REPEAT.
if(pDemod->SetRegBitsWithPage(pDemod, DVBT_IIC_REPEAT, 0x1) != FUNCTION_SUCCESS)
goto error_status_set_registers;
// Initialize tuner.
if(pTuner->Initialize(pTuner) != FUNCTION_SUCCESS)
goto error_status_execute_function;
// Disable demod DVBT_IIC_REPEAT.
if(pDemod->SetRegBitsWithPage(pDemod, DVBT_IIC_REPEAT, 0x0) != FUNCTION_SUCCESS)
goto error_status_set_registers;
// Initialize demod.
if(pDemod->Initialize(pDemod) != FUNCTION_SUCCESS)
goto error_status_execute_function;
// Set demod IF frequency with NIM default.
if(pDemod->SetIfFreqHz(pDemod, RTL2832_MAX3543_IF_FREQ_HZ_DEFAULT) != FUNCTION_SUCCESS)
goto error_status_execute_function;
// Set demod spectrum mode with NIM default.
if(pDemod->SetSpectrumMode(pDemod, RTL2832_MAX3543_SPECTRUM_MODE_DEFAULT) != FUNCTION_SUCCESS)
goto error_status_execute_function;
// Set demod registers.
for(i = 0; i < RTL2832_MAX3543_ADDITIONAL_INIT_REG_TABLE_LEN; i++)
{
// Get register bit name and its value.
RegBitName = AdditionalInitRegValueTable[i].RegBitName;
Value = AdditionalInitRegValueTable[i].Value;
// Set demod registers
if(pDemod->SetRegBitsWithPage(pDemod, RegBitName, Value) != FUNCTION_SUCCESS)
goto error_status_set_registers;
}
return FUNCTION_SUCCESS;
error_status_execute_function:
error_status_set_registers:
return FUNCTION_ERROR;
}
/**
@see DVBT_NIM_FP_INITIALIZE
*/
int
rtl2832_fc0013_Initialize(
DVBT_NIM_MODULE *pNim
)
{
typedef struct
{
int RegBitName;
unsigned long Value;
}
REG_VALUE_ENTRY;
static const REG_VALUE_ENTRY AdditionalInitRegValueTable[RTL2832_FC0013_ADDITIONAL_INIT_REG_TABLE_LEN] =
{
// RegBitName, Value
{DVBT_DAGC_TRG_VAL, 0x5a },
{DVBT_AGC_TARG_VAL_0, 0x0 },
{DVBT_AGC_TARG_VAL_8_1, 0x5a },
{DVBT_AAGC_LOOP_GAIN, 0x16 },
{DVBT_LOOP_GAIN2_3_0, 0x6 },
{DVBT_LOOP_GAIN2_4, 0x1 },
{DVBT_LOOP_GAIN3, 0x16 },
{DVBT_VTOP1, 0x35 },
{DVBT_VTOP2, 0x21 },
{DVBT_VTOP3, 0x21 },
{DVBT_KRF1, 0x0 },
{DVBT_KRF2, 0x40 },
{DVBT_KRF3, 0x10 },
{DVBT_KRF4, 0x10 },
{DVBT_IF_AGC_MIN, 0x80 },
{DVBT_IF_AGC_MAX, 0x7f },
{DVBT_RF_AGC_MIN, 0x80 },
{DVBT_RF_AGC_MAX, 0x7f },
{DVBT_POLAR_RF_AGC, 0x0 },
{DVBT_POLAR_IF_AGC, 0x0 },
{DVBT_AD7_SETTING, 0xe9bf },
{DVBT_EN_GI_PGA, 0x0 },
{DVBT_THD_LOCK_UP, 0x0 },
{DVBT_THD_LOCK_DW, 0x0 },
{DVBT_THD_UP1, 0x11 },
{DVBT_THD_DW1, 0xef },
{DVBT_INTER_CNT_LEN, 0xc },
{DVBT_GI_PGA_STATE, 0x0 },
{DVBT_EN_AGC_PGA, 0x1 },
// {DVBT_REG_GPE, 0x1 },
// {DVBT_REG_GPO, 0x0 },
// {DVBT_REG_MONSEL, 0x0 },
// {DVBT_REG_MON, 0x3 },
// {DVBT_REG_4MSEL, 0x0 },
};
TUNER_MODULE *pTuner;
DVBT_DEMOD_MODULE *pDemod;
int i;
int RegBitName;
unsigned long Value;
// Get tuner module and demod module.
pTuner = pNim->pTuner;
pDemod = pNim->pDemod;
// Enable demod DVBT_IIC_REPEAT.
if(pDemod->SetRegBitsWithPage(pDemod, DVBT_IIC_REPEAT, 0x1) != FUNCTION_SUCCESS)
goto error_status_set_registers;
// Initialize tuner.
if(pTuner->Initialize(pTuner) != FUNCTION_SUCCESS)
goto error_status_execute_function;
// Set FC0013 up-dowm AGC.
//(0xFE for master of dual).
//(0xFC for slave of dual, and for 2832 mini dongle).
if(fc0013_SetRegMaskBits(pTuner, 0x0c, 7, 0, 0xFC) != FC0013_I2C_SUCCESS)
goto error_status_set_tuner_registers;
// Disable demod DVBT_IIC_REPEAT.
if(pDemod->SetRegBitsWithPage(pDemod, DVBT_IIC_REPEAT, 0x0) != FUNCTION_SUCCESS)
goto error_status_set_registers;
// Initialize demod.
if(pDemod->Initialize(pDemod) != FUNCTION_SUCCESS)
goto error_status_execute_function;
// Set demod IF frequency with 0 Hz.
if(pDemod->SetIfFreqHz(pDemod, IF_FREQ_0HZ) != FUNCTION_SUCCESS)
goto error_status_execute_function;
// Set demod spectrum mode with SPECTRUM_NORMAL.
if(pDemod->SetSpectrumMode(pDemod, SPECTRUM_NORMAL) != FUNCTION_SUCCESS)
goto error_status_execute_function;
// Set demod registers.
for(i = 0; i < RTL2832_FC0013_ADDITIONAL_INIT_REG_TABLE_LEN; i++)
{
// Get register bit name and its value.
RegBitName = AdditionalInitRegValueTable[i].RegBitName;
Value = AdditionalInitRegValueTable[i].Value;
// Set demod registers
if(pDemod->SetRegBitsWithPage(pDemod, RegBitName, Value) != FUNCTION_SUCCESS)
goto error_status_set_registers;
}
// Reset demod by software reset.
if(pDemod->SoftwareReset(pDemod) != FUNCTION_SUCCESS)
goto error_status_execute_function;
// Enable demod DVBT_IIC_REPEAT.
if(pDemod->SetRegBitsWithPage(pDemod, DVBT_IIC_REPEAT, 0x1) != FUNCTION_SUCCESS)
goto error_status_set_registers;
// Get tuner RSSI value when calibration is on.
// Note: Need to execute rtl2832_fc0013_GetTunerRssiCalOn() after demod AD7 is on.
if(rtl2832_fc0013_GetTunerRssiCalOn(pNim) != FUNCTION_SUCCESS)
goto error_status_execute_function;
// Disable demod DVBT_IIC_REPEAT.
if(pDemod->SetRegBitsWithPage(pDemod, DVBT_IIC_REPEAT, 0x0) != FUNCTION_SUCCESS)
goto error_status_set_registers;
return FUNCTION_SUCCESS;
error_status_execute_function:
error_status_set_registers:
error_status_set_tuner_registers:
return FUNCTION_ERROR;
}
/**
@see QAM_NIM_FP_INITIALIZE
*/
int
rtl2836b_dvbc_va1t1ed6093_Initialize(
QAM_NIM_MODULE *pNim
)
{
typedef struct
{
int RegBitName;
unsigned long Value;
}
REG_VALUE_ENTRY;
static const REG_VALUE_ENTRY AdditionalInitRegValueTable[RTL2836B_DVBC_VA1T1ED6093_ADDITIONAL_INIT_REG_TABLE_LEN] =
{
// RegBitName, Value
{QAM_AGC_DRIVE_LV, 0x0 },
{QAM_OPT_RF_AAGC_DRIVE, 0x0 },
{QAM_OPT_IF_AAGC_DRIVE, 0x0 },
{QAM_OPT_RF_AAGC_OE, 0x0 },
{QAM_OPT_IF_AAGC_OE, 0x1 },
{QAM_PAR_RF_SD_IB, 0x1 },
{QAM_PAR_IF_SD_IB, 0x1 },
{QAM_RF_AAGC_MAX, 0x80 },
{QAM_RF_AAGC_MIN, 0x80 },
{QAM_IF_AAGC_MAX, 0xff },
{QAM_IF_AAGC_MIN, 0x0 },
{QAM_VTOP, 0x80 },
{QAM_KRF_MSB, 0x1 },
{QAM_KRF_LSB, 0x1 },
{QAM_AAGC_MODE_SEL, 0x0 },
};
QAM_DEMOD_MODULE *pDemod;
TUNER_MODULE *pTuner;
int i;
int RegBitName;
unsigned long Value;
// Get demod module and tuner module.
pDemod = pNim->pDemod;
pTuner = pNim->pTuner;
// Enable demod QAM_I2CT_EN_CTRL.
if(pDemod->RegAccess.Addr16Bit.SetRegBits(pDemod, QAM_I2CT_EN_CTRL, 0x1) != FUNCTION_SUCCESS)
goto error_status_set_registers;
// Initialize tuner.
if(pTuner->Initialize(pTuner) != FUNCTION_SUCCESS)
goto error_status_execute_function;
// Disable demod QAM_I2CT_EN_CTRL.
if(pDemod->RegAccess.Addr16Bit.SetRegBits(pDemod, QAM_I2CT_EN_CTRL, 0x0) != FUNCTION_SUCCESS)
goto error_status_set_registers;
// Initialize demod.
if(pDemod->Initialize(pDemod) != FUNCTION_SUCCESS)
goto error_status_execute_function;
// Set demod IF frequency with 36 MHz.
if(pDemod->SetIfFreqHz(pDemod, IF_FREQ_36000000HZ) != FUNCTION_SUCCESS)
goto error_status_execute_function;
// Set demod spectrum mode with SPECTRUM_NORMAL.
// Note: RTL2836B DVB-C demod hardware will detect spectrum mode automatically,
// even if one uses SetSpectrumMode() to set spectrum mode.
if(pDemod->SetSpectrumMode(pDemod, SPECTRUM_NORMAL) != FUNCTION_SUCCESS)
goto error_status_execute_function;
// Set demod AAGC registers.
// Note: SetParameters() will set QAM_AAGC_TARGET and QAM_VTOP according to parameters.
for(i = 0; i < RTL2836B_DVBC_VA1T1ED6093_ADDITIONAL_INIT_REG_TABLE_LEN; i++)
{
// Get register bit name and its value.
RegBitName = AdditionalInitRegValueTable[i].RegBitName;
Value = AdditionalInitRegValueTable[i].Value;
// Set demod registers
if(pDemod->RegAccess.Addr16Bit.SetRegBits(pDemod, RegBitName, Value) != FUNCTION_SUCCESS)
goto error_status_set_registers;
}
return FUNCTION_SUCCESS;
error_status_set_registers:
error_status_execute_function:
return FUNCTION_ERROR;
}
/**
@see QAM_NIM_FP_INITIALIZE
*/
s32
rtl2840_max3543_Initialize(
QAM_NIM_MODULE *pNim
)
{
typedef struct
{
s32 RegBitName;
u64 Value;
}
REG_VALUE_ENTRY;
static const REG_VALUE_ENTRY AdditionalInitRegValueTable[RTL2840_MAX3543_ADDITIONAL_INIT_REG_TABLE_LEN] =
{
// RegBitName, Value
{QAM_OPT_RF_AAGC_DRIVE, 0x1 },
{QAM_OPT_IF_AAGC_DRIVE, 0x1 },
{QAM_OPT_RF_AAGC_OEN, 0x1 },
{QAM_OPT_IF_AAGC_OEN, 0x1 },
{QAM_RF_AAGC_MAX, 0xff },
{QAM_RF_AAGC_MIN, 0x0 },
{QAM_IF_AAGC_MAX, 0xff },
{QAM_IF_AAGC_MIN, 0x0 },
{QAM_AAGC_MODE_SEL, 0x0 },
};
QAM_DEMOD_MODULE *pDemod;
TUNER_MODULE *pTuner;
s32 i;
s32 RegBitName;
u64 Value;
// Get demod module and tuner module.
pDemod = pNim->pDemod;
pTuner = pNim->pTuner;
// Initialize demod.
if(pDemod->Initialize(pDemod) != FUNCTION_SUCCESS)
goto error_status_execute_function;
// Initialize tuner.
if(pTuner->Initialize(pTuner) != FUNCTION_SUCCESS)
goto error_status_execute_function;
// Set demod IF frequency in Hz with NIM default.
if(pDemod->SetIfFreqHz(pDemod, RTL2840_MAX3543_IF_FREQ_HZ_DEFAULT) != FUNCTION_SUCCESS)
goto error_status_execute_function;
// Set demod spectrum mode with NIM default.
if(pDemod->SetSpectrumMode(pDemod, RTL2840_MAX3543_SPECTRUM_MODE_DEFAULT) != FUNCTION_SUCCESS)
goto error_status_execute_function;
// Set demod AAGC registers.
// Note: SetParameters() will set QAM_AAGC_TARGET and QAM_VTOP according to parameters.
for(i = 0; i < RTL2840_MAX3543_ADDITIONAL_INIT_REG_TABLE_LEN; i++)
{
// Get register bit name and its value.
RegBitName = AdditionalInitRegValueTable[i].RegBitName;
Value = AdditionalInitRegValueTable[i].Value;
// Set demod registers
if(pDemod->RegAccess.Addr8Bit.SetRegBitsWithPage(pDemod, RegBitName, Value) != FUNCTION_SUCCESS)
goto error_status_set_registers;
}
return FUNCTION_SUCCESS;
error_status_set_registers:
error_status_execute_function:
return FUNCTION_ERROR;
}
/**
@see QAM_NIM_FP_INITIALIZE
*/
int
rtl2840_mt2063_Initialize(
QAM_NIM_MODULE *pNim
)
{
typedef struct
{
int RegBitName;
unsigned long Value;
}
REG_VALUE_ENTRY;
static const REG_VALUE_ENTRY AdditionalInitRegValueTable[RTL2840_MT2063_ADDITIONAL_INIT_REG_TABLE_LEN] =
{
// RegBitName, Value
{QAM_OPT_RF_AAGC_DRIVE, 0x1 },
{QAM_OPT_IF_AAGC_DRIVE, 0x1 },
{QAM_OPT_RF_AAGC_OEN, 0x1 },
{QAM_OPT_IF_AAGC_OEN, 0x1 },
{QAM_RF_AAGC_MAX, 0x80 },
{QAM_RF_AAGC_MIN, 0x80 },
{QAM_IF_AAGC_MAX, 0xff },
{QAM_IF_AAGC_MIN, 0x0 },
{QAM_AAGC_MODE_SEL, 0x0 },
};
TUNER_MODULE *pTuner;
QAM_DEMOD_MODULE *pDemod;
MT2063_EXTRA_MODULE *pTunerExtra;
RTL2840_MT2063_EXTRA_MODULE *pNimExtra;
int i;
int RegBitName;
unsigned long Value;
// Get modules.
pTuner = pNim->pTuner;
pDemod = pNim->pDemod;
pTunerExtra = &(pTuner->Extra.Mt2063);
pNimExtra = &(pNim->Extra.Rtl2840Mt2063);
// Initialize tuner.
if(pTuner->Initialize(pTuner) != FUNCTION_SUCCESS)
goto error_status_execute_function;
// Set tuner IF frequency in Hz.
if(pTunerExtra->SetIfFreqHz(pTuner, pNimExtra->IfFreqHz) != FUNCTION_SUCCESS)
goto error_status_execute_function;
// Initialize demod.
if(pDemod->Initialize(pDemod) != FUNCTION_SUCCESS)
goto error_status_execute_function;
// Set demod IF frequency in Hz.
if(pDemod->SetIfFreqHz(pDemod, pNimExtra->IfFreqHz) != FUNCTION_SUCCESS)
goto error_status_execute_function;
// Set demod spectrum mode with SPECTRUM_INVERSE.
if(pDemod->SetSpectrumMode(pDemod, SPECTRUM_INVERSE) != FUNCTION_SUCCESS)
goto error_status_execute_function;
// Set demod AAGC registers.
// Note: SetParameters() will set QAM_AAGC_TARGET and QAM_VTOP according to parameters.
for(i = 0; i < RTL2840_MT2063_ADDITIONAL_INIT_REG_TABLE_LEN; i++)
{
// Get register bit name and its value.
RegBitName = AdditionalInitRegValueTable[i].RegBitName;
Value = AdditionalInitRegValueTable[i].Value;
// Set demod registers
if(pDemod->RegAccess.Addr8Bit.SetRegBitsWithPage(pDemod, RegBitName, Value) != FUNCTION_SUCCESS)
goto error_status_set_registers;
}
return FUNCTION_SUCCESS;
error_status_set_registers:
error_status_execute_function:
return FUNCTION_ERROR;
}
/**
@see DVBT_NIM_FP_INITIALIZE
*/
int
rtl2832_r820t_Initialize(
DVBT_NIM_MODULE *pNim
)
{
typedef struct
{
int RegBitName;
unsigned long Value;
}
REG_VALUE_ENTRY;
static const REG_VALUE_ENTRY AdditionalInitRegValueTable[RTL2832_R820T_ADDITIONAL_INIT_REG_TABLE_LEN] =
{
// RegBitName, Value
{DVBT_DAGC_TRG_VAL, 0x39 },
{DVBT_AGC_TARG_VAL_0, 0x0 },
{DVBT_AGC_TARG_VAL_8_1, 0x40 },
{DVBT_AAGC_LOOP_GAIN, 0x16 },
{DVBT_LOOP_GAIN2_3_0, 0x8 },
{DVBT_LOOP_GAIN2_4, 0x1 },
{DVBT_LOOP_GAIN3, 0x18 },
{DVBT_VTOP1, 0x35 },
{DVBT_VTOP2, 0x21 },
{DVBT_VTOP3, 0x21 },
{DVBT_KRF1, 0x0 },
{DVBT_KRF2, 0x40 },
{DVBT_KRF3, 0x10 },
{DVBT_KRF4, 0x10 },
{DVBT_IF_AGC_MIN, 0x80 },
{DVBT_IF_AGC_MAX, 0x7f },
{DVBT_RF_AGC_MIN, 0x80 },
{DVBT_RF_AGC_MAX, 0x7f },
{DVBT_POLAR_RF_AGC, 0x0 },
{DVBT_POLAR_IF_AGC, 0x0 },
{DVBT_AD7_SETTING, 0xe9f4 },
};
TUNER_MODULE *pTuner;
DVBT_DEMOD_MODULE *pDemod;
int i;
int RegBitName;
unsigned long Value;
// Get tuner module and demod module.
pTuner = pNim->pTuner;
pDemod = pNim->pDemod;
// Enable demod DVBT_IIC_REPEAT.
if(pDemod->SetRegBitsWithPage(pDemod, DVBT_IIC_REPEAT, 0x1) != FUNCTION_SUCCESS)
goto error_status_set_registers;
// Initialize tuner.
if(pTuner->Initialize(pTuner) != FUNCTION_SUCCESS)
goto error_status_execute_function;
// Disable demod DVBT_IIC_REPEAT.
if(pDemod->SetRegBitsWithPage(pDemod, DVBT_IIC_REPEAT, 0x0) != FUNCTION_SUCCESS)
goto error_status_set_registers;
// Initialize demod.
if(pDemod->Initialize(pDemod) != FUNCTION_SUCCESS)
goto error_status_execute_function;
// Set demod spectrum mode with SPECTRUM_INVERSE.
if(pDemod->SetSpectrumMode(pDemod, SPECTRUM_INVERSE) != FUNCTION_SUCCESS)
goto error_status_execute_function;
// Set demod registers.
for(i = 0; i < RTL2832_R820T_ADDITIONAL_INIT_REG_TABLE_LEN; i++)
{
// Get register bit name and its value.
RegBitName = AdditionalInitRegValueTable[i].RegBitName;
Value = AdditionalInitRegValueTable[i].Value;
// Set demod registers
if(pDemod->SetRegBitsWithPage(pDemod, RegBitName, Value) != FUNCTION_SUCCESS)
goto error_status_set_registers;
}
// Reset demod by software reset.
if(pDemod->SoftwareReset(pDemod) != FUNCTION_SUCCESS)
goto error_status_execute_function;
return FUNCTION_SUCCESS;
error_status_execute_function:
error_status_set_registers:
//error_status_set_tuner_registers:
return FUNCTION_ERROR;
}