Beispiel #1
0
////////////////////////////////////////////////////////////
//  This fetches a pointer to the control toolbar.  It may
//  either be embedded in the current window or floating out
//  in the open.
////////////////////////////////////////////////////////////
ControlToolBar *AudacityProject::GetControlToolBar()
{
   ToolBar *tb = NULL;
   bool GetToolBarFromFrame = false;

   if (mToolBarArray.GetCount() != 0) {
      tb = mToolBarArray[0];
      if ((tb->GetType()) != ControlToolBarID)
         GetToolBarFromFrame = true;
   } else {
      GetToolBarFromFrame = true;
   }

   if (GetToolBarFromFrame && gControlToolBarStub)
      tb = gControlToolBarStub->GetToolBar();

   return wxDynamicCast(tb, ControlToolBar);
}
Beispiel #2
0
//
// Read the toolbar states
//
void ToolManager::ReadConfig()
{
   wxString oldpath = gPrefs->GetPath();
   wxArrayInt unordered[ DockCount ];
   bool show[ ToolBarCount ];
   int width[ ToolBarCount ];
   int height[ ToolBarCount ];
   int x, y;
   int dock, ndx;
   bool someFound { false };

#if defined(__WXMAC__)
   // Disable window animation
   wxSystemOptions::SetOption( wxMAC_WINDOW_PLAIN_TRANSITION, 1 );
#endif

   // Change to the bar root
   gPrefs->SetPath( wxT("/GUI/ToolBars") );

   ToolBarConfiguration::Legacy topLegacy, botLegacy;

   // Load and apply settings for each bar
   for( ndx = 0; ndx < ToolBarCount; ndx++ )
   {
      ToolBar *bar = mBars[ ndx ].get();
      //wxPoint Center = mParent->GetPosition() + (mParent->GetSize() * 0.33);
      //wxPoint Center( 
      //   wxSystemSettings::GetMetric( wxSYS_SCREEN_X ) /2 ,
      //   wxSystemSettings::GetMetric( wxSYS_SCREEN_Y ) /2 );

      // Change to the bar subkey
      gPrefs->SetPath( bar->GetSection() );

      bool bShownByDefault = true;
      int defaultDock = TopDockID;
      
      if( ndx == SelectionBarID )
         defaultDock = BotDockID;
      if( ndx == MeterBarID )
         bShownByDefault = false;
      if( ndx == ScrubbingBarID )
         bShownByDefault = false;

#ifdef EXPERIMENTAL_SPECTRAL_EDITING
      if( ndx == SpectralSelectionBarID ){
         defaultDock = BotDockID;
         bShownByDefault = false; // Only show if asked for.  
      }
#endif

      // Read in all the settings
      gPrefs->Read( wxT("Dock"), &dock, -1);
      const bool found = (dock != -1);
      if (found)
         someFound = true;
      if (!found)
         dock = defaultDock;
      
      ToolDock *d;
      ToolBarConfiguration::Legacy *pLegacy;
      switch(dock)
      {
         case TopDockID: d = mTopDock; pLegacy = &topLegacy; break;
         case BotDockID: d = mBotDock; pLegacy = &botLegacy;  break;
         default:        d = nullptr; pLegacy = nullptr; break;
      }

      bool ordered = ToolBarConfiguration::Read
         (d ? &d->GetConfiguration() : nullptr,
          pLegacy,
          bar, show[ ndx ], bShownByDefault)
      && found;

      gPrefs->Read( wxT("X"), &x, -1 );
      gPrefs->Read( wxT("Y"), &y, -1 );
      gPrefs->Read( wxT("W"), &width[ ndx ], -1 );
      gPrefs->Read( wxT("H"), &height[ ndx ], -1 );

      bar->SetVisible( show[ ndx ] );

      // Docked or floating?
      if( dock )
      {
         // Default to top dock if the ID isn't valid
         if( dock < NoDockID || dock > DockCount ) {
            dock = TopDockID;
         }

         // Create the bar with the correct parent
         if( dock == TopDockID )
         {
            bar->Create( mTopDock );
         }
         else
         {
            bar->Create( mBotDock );
         }

         // Set the width and height
         if( width[ ndx ] != -1 && height[ ndx ] != -1 )
         {
            wxSize sz( width[ ndx ], height[ ndx ] );
            bar->SetSize( sz );
         }

#ifdef EXPERIMENTAL_SYNC_LOCK
         // Set the width
         if( width[ ndx ] >= bar->GetSize().x )
         {
            wxSize sz( width[ ndx ], bar->GetSize().y );
            bar->SetSize( sz );
            bar->Layout();
         }
#else
         // note that this section is here because if you had been using sync-lock and now you aren't,
         // the space for the extra button is stored in audacity.cfg, and so you get an extra space
         // in the EditToolbar.
         // It is needed so that the meterToolbar size gets preserved.
         // Longer-term we should find a better fix for this.
         wxString thisBar = bar->GetSection();
         if( thisBar != wxT("Edit"))
         {
            // Set the width
            if( width[ ndx ] >= bar->GetSize().x )
            {
               wxSize sz( width[ ndx ], bar->GetSize().y );
               bar->SetSize( sz );
               bar->Layout();
            }
         }
#endif

         if (!ordered)
         {
            // These must go at the end
            unordered[ dock - 1 ].Add( ndx );
         }
      }
      else
      {
         // Create the bar (with the top dock being temporary parent)
         bar->Create( mTopDock );

         // Construct a NEW floater
         wxASSERT(mParent);
         ToolFrame *f = safenew ToolFrame( mParent, this, bar, wxPoint( x, y ) );

         // Set the width and height
         if( width[ ndx ] != -1 && height[ ndx ] != -1 )
         {
            wxSize sz( width[ ndx ], height[ ndx ] );
            f->SetSizeHints( sz );
            f->SetSize( sz );
            f->Layout();
            if( (x!=-1) && (y!=-1) )
               bar->SetPositioned();
         }

         // Required on Linux Xfce
         wxSize msz(width[ndx],height[ndx]-1);
         bar->GetParent()->SetMinSize(msz);

         // Inform toolbar of change
         bar->SetDocked( NULL, false );

         // Show or hide it
         Expose( ndx, show[ ndx ] );
      }

      // Change back to the bar root
      //gPrefs->SetPath( wxT("..") );  <-- Causes a warning...
      // May or may not have gone into a subdirectory,
      // so use an absolute path.
      gPrefs->SetPath( wxT("/GUI/ToolBars") );
   }

   mTopDock->GetConfiguration().PostRead(topLegacy);
   mBotDock->GetConfiguration().PostRead(botLegacy);

   // Add all toolbars to their target dock
   for( dock = 0; dock < DockCount; dock++ )
   {
      ToolDock *d = ( dock + 1 == TopDockID ? mTopDock : mBotDock );

      d->LoadConfig();

      // Add all unordered toolbars
      bool deviceWasPositioned = false;
      for( int ord = 0; ord < (int) unordered[ dock ].GetCount(); ord++ )
      {
         ToolBar *t = mBars[ unordered[ dock ][ ord ] ].get();

         if (deviceWasPositioned &&
             t->GetType() == DeviceBarID)
            continue;

         if (someFound &&
             t->GetType() == ScrubbingBarID) {
            // Special case code to put the NEW scrubbing toolbar where we
            // want it, when audacity.cfg is present from an older version
            ToolBar *lastRoot {};

            // Change from the ideal configuration to the constrained one,
            // just as when dragging and dropping
            ToolBarConfiguration dummy;
            mTopDock->WrapConfiguration(dummy);

            // Start a NEW row with just the scrubbing toolbar
            auto &configuration = mTopDock->GetConfiguration();
            for (const auto place : configuration)
               if (place.position.rightOf == nullptr)
                  lastRoot = place.pTree->pBar;
            ToolBarConfiguration::Position position {
               nullptr, lastRoot, false
            };
            mTopDock->Dock(t, false, position);

            // Reposition the device toolbar, if it was docked above,
            // right of scrubbing
            const auto deviceToolBar = mBars[ DeviceBarID ].get();
            if (deviceToolBar->GetDock() == mTopDock) {
               deviceToolBar->GetDock()->Undock(deviceToolBar);
               position = { t, nullptr };
               mTopDock->Dock(deviceToolBar, false, position);

               // Remember not to place the device toolbar again
               deviceWasPositioned = true;
            }
            Expose( t->GetId(), show[ t->GetId() ] );
            continue;
         }

         // Dock it
         d->Dock( t, false );

         // Show or hide the bar
         Expose( t->GetId(), show[ t->GetId() ] );
      }
   }

   // Restore original config path
   gPrefs->SetPath( oldpath );

#if defined(__WXMAC__)
   // Reinstate original transition
   wxSystemOptions::SetOption( wxMAC_WINDOW_PLAIN_TRANSITION, mTransition );
#endif

   if (!someFound)
      Reset();
}