//------------------------------------------------------------------------------------------------------------------------------------------------------------------------
void PulsesCountScreen::doDraw(TFTMenu* menu)
{
UTFT* dc = menu->getDC();
uint8_t* oldFont = dc->getFont();
dc->setFont(BigRusFont);
dc->setColor(VGA_WHITE);
menu->print("ПАРАМЕТРЫ",130,2);
menu->print("СИСТОЛИЧЕСКОЕ ", 1, 37);
menu->print("ДИАСТОЛИЧЕСКОЕ ", 1, 72);
menu->print("ЧАСТОТА ПУЛЬСА", 1, 107);
menu->print("ПАЛЬПАЦИЯ", 1, 142);
if (channel4PulsesVal.toInt() == 0)
{
screenButtons->relabelButton(channel4Button, "ОТКЛ");
}
else
{
screenButtons->relabelButton(channel4Button, "ВКЛ");
}
screenButtons->drawButton(channel4Button);
dc->setFont(oldFont);
}
void PlugScreen::drawPrepareScreen()
{
Serial.println("PlugScreen::handlePlugScreen SET LIGHTS ID \n");
myUTFT.setFont(SmallFont);
myUTFT.clrScr();
myUTFT.setColor(255, 0, 0);
myUTFT.fillRect(0, 0, 220, 13);
myUTFT.setColor(255, 255, 255);
myUTFT.setBackColor(255, 0, 0);
myUTFT.drawLine(0, 14, 320, 14);
myUTFT.print("Plug Setting", CENTER, 1);
myUTFT.setBackColor(0, 0, 0);
myUTFT.print("Use the remote that came with your", LEFT, 30);
myUTFT.print("plugs to set which unit and address it", LEFT, 42);
myUTFT.print("uses.Just point the remote at the screen", LEFT, 54);
myUTFT.print("and press a button for the unit you want", LEFT, 66);
myUTFT.print("to use for the lights", LEFT, 78);
myUTFT.print("", LEFT, 90);
myUTFT.print("Please press a unit for the lights", LEFT, 102);
myUTFT.print("", LEFT, 114);
exitButton = myButtons.addButton( 10, 170, 145, 53, mainButton);
myButtons.drawButton(exitButton);
myUTFT.setBackColor (161,190,237);
myUTFT.print("Cancel", 55, 195);
myUTFT.setFont(BigFont);
}
//------------------------------------------------------------------------------------------------------------------------------------------------------------------------
void SoundLevelScreen::doDraw(TFTMenu* menu)
{
UTFT* dc = menu->getDC();
dc->setColor(VGA_WHITE);
uint8_t* oldFont = dc->getFont();
dc->setFont(BigRusFont);
dc->setBackColor(VGA_BLACK);
// тут рисуем, что надо именно нам, кнопки прорисуются сами после того, как мы тут всё отрисуем
menu->print("УРОВЕНЬ ЗВУКА", 105, 10);
dc->setFont(oldFont);
}
void PlugScreen::waitForReceiver(NewRemoteCode receivedCode)
{
//Clear What was there.
myUTFT.setFont(SmallFont);
myUTFT.clrScr();
myUTFT.setColor(255, 0, 0);
myUTFT.fillRect(0, 0, 220, 13);
myUTFT.setColor(255, 255, 255);
myUTFT.setBackColor(255, 0, 0);
myUTFT.drawLine(0, 14, 320, 14);
myUTFT.print("ID Set", CENTER, 1);
myUTFT.setBackColor(0, 0, 0);
setAddresstoEEPROM(receivedCode.address);
if(plugDevice.lights)
{
EEPROM.write(EEPROM_LEARNED_LIGHTS_UNIT,receivedCode.unit);
plugDevice.lights = false;
}
if(plugDevice.pump)
{
EEPROM.write(EEPROM_LEARNED_PUMP_UNIT,receivedCode.unit);
plugDevice.pump = false;
}
if(plugDevice.heater)
{
EEPROM.write(EEPROM_LEARNED_HEATER_UNIT,receivedCode.unit);
plugDevice.heater = false;
}
//unsigned long add = getAddress();
String sAddress(receivedCode.address);
String slightID(receivedCode.unit);
myUTFT.print("The unit has been set to unit ", LEFT, 30);
myUTFT.print(slightID, LEFT, 42);
myUTFT.print("The Transmitting Address is", LEFT, 54);
myUTFT.print(sAddress, LEFT, 66);
myUTFT.print("You can now use the plug", LEFT, 78);
myUTFT.print("**********************************", LEFT, 90);
myButtons.deleteAllButtons();
exitButton = -1;
exitButton = myButtons.addButton( 10, 170, 145, 53, mainButton);
myButtons.drawButton(exitButton);
myUTFT.setBackColor (161,190,237);
myUTFT.print("Back", 55, 195);
myUTFT.setFont(BigFont);
}
void ECCalibrateScreen::endCalibration()
{
myUTFT.fillScr(VGA_BLUE);
myUTFT.setColor(VGA_RED);
myUTFT.fillRoundRect(80, 70, 239, 169);
myUTFT.setColor(VGA_WHITE);
myUTFT.setBackColor(VGA_RED);
myUTFT.print("! All Done !", CENTER, 93);
myUTFT.print("Touch Screen", CENTER, 119);
myUTFT.print("To Exit", CENTER, 132);
SwaitForTouch();
myUTFT.clrScr();
myUTFT.setFont(BigFont);
myButtons.enableButton( /*resetButton*/ 0);
myButtons.enableButton( /*infoButton*/ 1);
myButtons.enableButton( /*readButton*/ 2);
myButtons.enableButton( /*tempReadButton*/ 3);
myButtons.enableButton( /*stopButton*/ 4);
myButtons.enableButton( /*startButton*/ 5);
myButtons.enableButton( /*backButton*/6);
myButtons.enableButton( /*calibrateButton*/7);
SdrawScreen();
}
void License::render(UTFT tft) {
tft.clrScr();
tft.setFont(SmallFont);
_tft = tft;
_index = _offset = 0;
update();
}
//------------------------------------------------------------------------------------------------------------------------------------------------------------------------
void Screen1::doUpdate(TFTMenu* menu)
{
// тут обновляем внутреннее состояние
if (isActive())
{
DS3231Time tm = RealtimeClock.getTime();
if (oldsecond != tm.second)
{
oldsecond = tm.second;
UTFT* dc = menu->getDC();
dc->setColor(VGA_WHITE);
dc->setBackColor(VGA_BLACK);
// получаем компоненты даты в виде строк
String strDate = RealtimeClock.getDateStr(tm);
String strTime = RealtimeClock.getTimeStr(tm);
dc->setFont(SmallRusFont);
// печатаем их
dc->print(strDate, 5, 305);
dc->print(strTime, 160, 305);
//dc->printNumF(setupPin.power3V3, 1, 195, 1); //
//dc->printNumF(setupPin.power5V0, 1, 195, 15); //
//dc->printNumI(setupPin.power200, 195, 30); //
}
}
}
//------------------------------------------------------------------------------------------------------------------------------------------------------------------------
void Screen1_0::doDraw(TFTMenu* menu)
{
UTFT* dc = menu->getDC();
dc->setColor(VGA_WHITE);
dc->setBackColor(VGA_BLACK);
dc->setFont(TFT_FONT);
// тут рисуем, что надо именно нам, кнопки прорисуются сами после того, как мы тут всё отрисуем
menu->print("Настройки", 50, 0);
}
//------------------------------------------------------------------------------------------------------------------------------------------------------------------------
void Screen1::doDraw(TFTMenu* menu)
{
UTFT* dc = menu->getDC();
dc->setColor(VGA_WHITE);
dc->setBackColor(VGA_BLACK);
dc->setFont(TFT_FONT);
// тут рисуем, что надо именно нам, кнопки прорисуются сами после того, как мы тут всё отрисуем
menu->print("Главный экран", 15, 0);
//// выводим число
//dc->setColor(VGA_BLUE);
//int number = 12345;
//dc->printNumI(number, 20,200);
//dc->setFont(SmallSymbolFont);
//// выводим спецсимвол
//dc->printChar(47,20,250);
// возвращает шрифт по умолчанию
dc->setFont(TFT_FONT);
/*RealXBeeMenu.XBee_status();
delay(300);*/
}
void Mixer::render(UTFT tft) {
tft.clrScr();
tft.setColor(255, 255, 255);
tft.fillRect(0, 0, tft.getDisplayXSize() - 1, 12);
tft.setBackColor(255, 255, 255);
tft.setColor(0, 0, 0);
tft.setFont(SmallFont);
tft.print("Mixer", 10, 0);
_tft = tft;
for(byte x=0;x<3; x++) {
renderedGains[x] = 0;
renderMute(x);
}
update();
}
void Keyboard::render(UTFT tft) {
tft.clrScr();
tft.setFont(BigFont);
tft.setBackColor(255, 255, 255);
tft.setColor(255, 255, 255);
tft.drawRoundRect(30, 30, tft.getDisplayXSize() - 111, 70);
tft.fillRect(tft.getDisplayXSize() - 106, 30, tft.getDisplayXSize() - 66, 70);
tft.setColor(0, 0, 0);
tft.print("<-", tft.getDisplayXSize() - 102, 43);
tft.setColor(255, 255, 255);
tft.fillRect(tft.getDisplayXSize() - 61, 30, tft.getDisplayXSize() - 21, 70);
tft.setColor(0, 0, 0);
tft.print("OK", tft.getDisplayXSize() - 57, 43);
byte br = 9,
nl = 0,
offset = 1;
int x = offset,
y = 120;
for(byte j=0; j<numKeys; j++) {
tft.setColor(255, 255, 255);
tft.fillRect(x, y, x + 30, y + 30);
tft.setColor(0, 0, 0);
String str = "";
str += keys[j]; //lame!
tft.print(str, x + 7, y + 8);
x += 32;
nl++;
if(nl > br) {
offset += 15;
x = offset;
nl = 0;
y += 32;
br -= 1;
}
}
_tft = tft;
}
void ECCalibrateScreen::startCalibration()
{
myButtons.disableButton( resetButton );
myButtons.disableButton( infoButton );
myButtons.disableButton( readButton );
myButtons.disableButton( tempReadButton );
myButtons.disableButton( stopButton );
myButtons.disableButton( startButton );
myButtons.disableButton( backButton);
myButtons.disableButton( calibrateButton);
inputstring = "P,1\r"; //In Hydroponics we use always E.C Sensor 0.1 -- Fresh Water
Serial3.print(inputstring); //send command to sensor.
myUTFT.setFont(SmallFont);
dryCalibration();
highCalibration();
}
void ECCalibrateScreen::begin()
{
// Initial setup
myUTFT.InitLCD();
myUTFT.clrScr();
myTouch.InitTouch();
myTouch.setPrecision(PREC_MEDIUM);
myUTFT.setFont(BigFont);
myUTFT.setBackColor(0, 0, 255);
myButtons.setTextFont(BigFont);
resetButtons();
sensorstring = "";
sensorstring.reserve(30); //set aside some bytes for receiving data
inputstring = "";
waiting_for_info = false;
waiting_for_single_reading = false;
sensor_stringcomplete = false;
factReset = false;
inStopMode = false;
waiting_for_dry = false;
Serial3.begin(38400); //To communicate with the sensor.
Serial.begin(115200);
//Start Read straight away.
inputstring = ( waterTempString + ",C\r"); //Start based on temp.
Serial3.print(inputstring); //send command to sensor.
}
