/**
* Function SetTrackSegmentWidth
* Modify one track segment width or one via diameter and drill (using DRC control).
* Basic routine used by other routines when editing tracks or vias
* @param aTrackItem = the track segment or via to modify
* @param aItemsListPicker = the list picker to use for an undo command (can be NULL)
* @param aUseNetclassValue = true to use NetClass value, false to use BOARD::m_designSettings value
* @return true if done, false if no not change (because DRC error)
*/
bool PCB_EDIT_FRAME::SetTrackSegmentWidth( TRACK* aTrackItem,
PICKED_ITEMS_LIST* aItemsListPicker,
bool aUseNetclassValue )
{
int initial_width, new_width;
int initial_drill = -1,new_drill = -1;
bool change_ok = false;
NETINFO_ITEM* net = NULL;
if( aUseNetclassValue )
net = aTrackItem->GetNet();
initial_width = aTrackItem->GetWidth();
if( net )
new_width = net->GetTrackWidth();
else
new_width = GetDesignSettings().GetCurrentTrackWidth();
if( aTrackItem->Type() == PCB_VIA_T )
{
const VIA *via = static_cast<const VIA *>( aTrackItem );
if( !via->IsDrillDefault() )
initial_drill = via->GetDrillValue();
if( net )
{
new_width = net->GetViaSize();
}
else
{
new_width = GetDesignSettings().GetCurrentViaSize();
new_drill = GetDesignSettings().GetCurrentViaDrill();
}
if( via->GetViaType() == VIA_MICROVIA )
{
if( net )
new_width = net->GetMicroViaSize();
else
new_width = GetDesignSettings().GetCurrentMicroViaSize();
}
}
aTrackItem->SetWidth( new_width );
// make a DRC test because the new size is bigger than the old size
if( initial_width < new_width )
{
int diagdrc = OK_DRC;
if( g_Drc_On )
diagdrc = m_drc->Drc( aTrackItem, GetBoard()->m_Track );
if( diagdrc == OK_DRC )
change_ok = true;
}
else if( initial_width > new_width )
{
change_ok = true;
}
else if( (aTrackItem->Type() == PCB_VIA_T) && (initial_drill != new_drill) )
{
// if new width == initial_width: do nothing, unless a via has its drill value changed
change_ok = true;
}
if( change_ok )
{
OnModify();
if( aItemsListPicker )
{
aTrackItem->SetWidth( initial_width );
ITEM_PICKER picker( aTrackItem, UR_CHANGED );
picker.SetLink( aTrackItem->Clone() );
aItemsListPicker->PushItem( picker );
aTrackItem->SetWidth( new_width );
if( aTrackItem->Type() == PCB_VIA_T )
{
// Set new drill value. Note: currently microvias have only a default drill value
VIA *via = static_cast<VIA *>( aTrackItem );
if( new_drill > 0 )
via->SetDrill( new_drill );
else
via->SetDrillDefault();
}
}
}
else
{
aTrackItem->SetWidth( initial_width );
}
return change_ok;
}
void BOARD_ITEM::SwapData( BOARD_ITEM* aImage )
{
if( aImage == NULL )
{
return;
}
EDA_ITEM * pnext = Next();
EDA_ITEM * pback = Back();
switch( Type() )
{
case PCB_MODULE_T:
{
MODULE* tmp = (MODULE*) aImage->Clone();
( (MODULE*) aImage )->Copy( (MODULE*) this );
( (MODULE*) this )->Copy( tmp );
delete tmp;
}
break;
case PCB_ZONE_AREA_T:
{
ZONE_CONTAINER* tmp = (ZONE_CONTAINER*) aImage->Clone();
( (ZONE_CONTAINER*) aImage )->Copy( (ZONE_CONTAINER*) this );
( (ZONE_CONTAINER*) this )->Copy( tmp );
delete tmp;
}
break;
case PCB_LINE_T:
std::swap( *((DRAWSEGMENT*)this), *((DRAWSEGMENT*)aImage) );
break;
case PCB_TRACE_T:
case PCB_VIA_T:
{
TRACK* track = (TRACK*) this;
TRACK* image = (TRACK*) aImage;
EXCHG(track->m_Layer, image->m_Layer );
// swap start, end, width and shape for track and image.
wxPoint exchp = track->GetStart();
track->SetStart( image->GetStart() );
image->SetStart( exchp );
exchp = track->GetEnd();
track->SetEnd( image->GetEnd() );
image->SetEnd( exchp );
int atmp = track->GetWidth();
track->SetWidth( image->GetWidth() );
image->SetWidth( atmp );
if( Type() == PCB_VIA_T )
{
VIA *via = static_cast<VIA*>( this );
VIA *viaimage = static_cast<VIA*>( aImage );
VIATYPE_T viatmp = via->GetViaType();
via->SetViaType( viaimage->GetViaType() );
viaimage->SetViaType( viatmp );
int drilltmp = via->GetDrillValue();
if( via->IsDrillDefault() )
drilltmp = -1;
int itmp = viaimage->GetDrillValue();
if( viaimage->IsDrillDefault() )
itmp = -1;
EXCHG(itmp, drilltmp );
if( drilltmp > 0 )
via->SetDrill( drilltmp );
else
via->SetDrillDefault();
if( itmp > 0 )
viaimage->SetDrill( itmp );
else
viaimage->SetDrillDefault();
}
}
break;
case PCB_TEXT_T:
std::swap( *((TEXTE_PCB*)this), *((TEXTE_PCB*)aImage) );
break;
case PCB_TARGET_T:
std::swap( *((PCB_TARGET*)this), *((PCB_TARGET*)aImage) );
break;
case PCB_DIMENSION_T:
std::swap( *((DIMENSION*)this), *((DIMENSION*)aImage) );
break;
case PCB_ZONE_T:
default:
wxLogMessage( wxT( "SwapData() error: unexpected type %d" ), Type() );
break;
}
if( pnext != Next() || pback != Back() )
{
Pnext = pnext;
Pback = pback;
#ifdef DEBUG
wxLogMessage( wxT( "SwapData Error: %s Pnext or Pback pointers modified" ),
GetClass().GetData() );
#endif
}
}
int PCB_EDIT_FRAME::SetTrackSegmentWidth( TRACK* aTrackItem,
PICKED_ITEMS_LIST* aItemsListPicker,
bool aUseNetclassValue )
{
int return_code = TRACK_ACTION_NONE;
int initial_width;
int new_width;
int initial_drill = -1;
int new_drill = -1;
NETINFO_ITEM* net = NULL;
if( aUseNetclassValue )
net = aTrackItem->GetNet();
initial_width = aTrackItem->GetWidth();
if( net )
new_width = net->GetTrackWidth();
else
new_width = GetDesignSettings().GetCurrentTrackWidth();
if( aTrackItem->Type() == PCB_VIA_T )
{
const VIA *via = static_cast<const VIA *>( aTrackItem );
// Micro vias have a size only defined in their netclass
// (no specific values defined by a table of specific value)
// Ensure the netclass is accessible:
if( via->GetViaType() == VIA_MICROVIA && net == NULL )
net = aTrackItem->GetNet();
// Get the draill value, regardless it is default or specific
initial_drill = via->GetDrillValue();
if( net )
{
new_width = net->GetViaSize();
new_drill = net->GetViaDrillSize();
}
else
{
new_width = GetDesignSettings().GetCurrentViaSize();
new_drill = GetDesignSettings().GetCurrentViaDrill();
}
if( via->GetViaType() == VIA_MICROVIA )
{
if( net )
{
new_width = net->GetMicroViaSize();
new_drill = net->GetMicroViaDrillSize();
}
else
{
// Should not occur
}
}
// Old versions set a drill value <= 0, when the default netclass it used
// but it could be better to set the drill value to the actual value
// to avoid issues for existing vias, if the default drill value is modified
// in the netclass, and not in current vias.
if( via->GetDrill() <= 0 ) // means default netclass drill value used
{
initial_drill = -1; // Force drill vias re-initialization
}
}
aTrackItem->SetWidth( new_width );
// make a DRC test because the new size is bigger than the old size
if( initial_width < new_width )
{
int diagdrc = OK_DRC;
return_code = TRACK_ACTION_SUCCESS;
if( Settings().m_legacyDrcOn )
diagdrc = m_drc->DrcOnCreatingTrack( aTrackItem, GetBoard()->m_Track );
if( diagdrc != OK_DRC )
return_code = TRACK_ACTION_DRC_ERROR;
}
else if( initial_width > new_width )
{
return_code = TRACK_ACTION_SUCCESS;
}
else if( (aTrackItem->Type() == PCB_VIA_T) )
{
// if a via has its drill value changed, force change
if( initial_drill != new_drill )
return_code = TRACK_ACTION_SUCCESS;
}
if( return_code == TRACK_ACTION_SUCCESS )
{
OnModify();
if( aItemsListPicker )
{
aTrackItem->SetWidth( initial_width );
ITEM_PICKER picker( aTrackItem, UR_CHANGED );
picker.SetLink( aTrackItem->Clone() );
aItemsListPicker->PushItem( picker );
aTrackItem->SetWidth( new_width );
if( aTrackItem->Type() == PCB_VIA_T )
{
// Set new drill value. Note: currently microvias have only a default drill value
VIA *via = static_cast<VIA *>( aTrackItem );
if( new_drill > 0 )
via->SetDrill( new_drill );
else
via->SetDrillDefault();
}
}
}
else
{
aTrackItem->SetWidth( initial_width );
}
return return_code;
}
void BOARD_ITEM::SwapData( BOARD_ITEM* aImage )
{
if( aImage == NULL )
return;
// Remark: to create images of edited items to undo, we are using Clone method
// which can duplication of items foe copy, but does not clone all members
// mainly pointers in chain and time stamp, which is set to new, unique value.
// So we have to use the current values of these parameters.
EDA_ITEM * pnext = Next();
EDA_ITEM * pback = Back();
DHEAD* mylist = m_List;
time_t timestamp = GetTimeStamp();
switch( Type() )
{
case PCB_MODULE_T:
{
MODULE* tmp = (MODULE*) aImage->Clone();
( (MODULE*) aImage )->Copy( (MODULE*) this );
( (MODULE*) this )->Copy( tmp );
delete tmp;
}
break;
case PCB_ZONE_AREA_T:
{
ZONE_CONTAINER* tmp = (ZONE_CONTAINER*) aImage->Clone();
( (ZONE_CONTAINER*) aImage )->Copy( (ZONE_CONTAINER*) this );
( (ZONE_CONTAINER*) this )->Copy( tmp );
delete tmp;
}
break;
case PCB_LINE_T:
std::swap( *((DRAWSEGMENT*)this), *((DRAWSEGMENT*)aImage) );
break;
case PCB_TRACE_T:
case PCB_VIA_T:
{
TRACK* track = (TRACK*) this;
TRACK* image = (TRACK*) aImage;
std::swap(track->m_Layer, image->m_Layer );
// swap start, end, width and shape for track and image.
wxPoint exchp = track->GetStart();
track->SetStart( image->GetStart() );
image->SetStart( exchp );
exchp = track->GetEnd();
track->SetEnd( image->GetEnd() );
image->SetEnd( exchp );
int atmp = track->GetWidth();
track->SetWidth( image->GetWidth() );
image->SetWidth( atmp );
if( Type() == PCB_VIA_T )
{
VIA *via = static_cast<VIA*>( this );
VIA *viaimage = static_cast<VIA*>( aImage );
VIATYPE_T viatmp = via->GetViaType();
via->SetViaType( viaimage->GetViaType() );
viaimage->SetViaType( viatmp );
int drilltmp = via->GetDrillValue();
if( via->IsDrillDefault() )
drilltmp = -1;
int itmp = viaimage->GetDrillValue();
if( viaimage->IsDrillDefault() )
itmp = -1;
std::swap(itmp, drilltmp );
if( drilltmp > 0 )
via->SetDrill( drilltmp );
else
via->SetDrillDefault();
if( itmp > 0 )
viaimage->SetDrill( itmp );
else
viaimage->SetDrillDefault();
}
}
break;
case PCB_TEXT_T:
std::swap( *((TEXTE_PCB*)this), *((TEXTE_PCB*)aImage) );
break;
case PCB_TARGET_T:
std::swap( *((PCB_TARGET*)this), *((PCB_TARGET*)aImage) );
break;
case PCB_DIMENSION_T:
std::swap( *((DIMENSION*)this), *((DIMENSION*)aImage) );
break;
case PCB_ZONE_T:
default:
wxLogMessage( wxT( "SwapData() error: unexpected type %d" ), Type() );
break;
}
// Restore pointers and time stamp, to be sure they are not broken
Pnext = pnext;
Pback = pback;
m_List = mylist;
SetTimeStamp( timestamp );
}
bool PCB_EDIT_FRAME::SetTrackSegmentWidth( TRACK* aTrackItem,
PICKED_ITEMS_LIST* aItemsListPicker,
bool aUseNetclassValue )
{
/* Modify one track segment width or one via diameter and drill (using DRC control).
* Basic function used by other routines when editing tracks or vias
* aTrackItem = the track segment or via to modify
* aItemsListPicker = the list picker to use for an undo command (can be NULL)
* aUseNetclassValue = true to use NetClass value, false to use BOARD::m_designSettings value
* return true if done, false if no not change (due to DRC error)
*/
int initial_width, new_width;
int initial_drill = -1,new_drill = -1;
bool change_ok = false;
NETINFO_ITEM* net = NULL;
if( aUseNetclassValue )
net = aTrackItem->GetNet();
initial_width = aTrackItem->GetWidth();
if( net )
new_width = net->GetTrackWidth();
else
new_width = GetDesignSettings().GetCurrentTrackWidth();
if( aTrackItem->Type() == PCB_VIA_T )
{
const VIA *via = static_cast<const VIA *>( aTrackItem );
// Micro vias have a size only defined in their netclass
// (no specific values defined by a table of specific value)
// Ensure the netclass is accessible:
if( via->GetViaType() == VIA_MICROVIA && net == NULL )
net = aTrackItem->GetNet();
// Get the draill value, regardless it is default or specific
initial_drill = via->GetDrillValue();
if( net )
{
new_width = net->GetViaSize();
new_drill = net->GetViaDrillSize();
}
else
{
new_width = GetDesignSettings().GetCurrentViaSize();
new_drill = GetDesignSettings().GetCurrentViaDrill();
}
if( via->GetViaType() == VIA_MICROVIA )
{
if( net )
{
new_width = net->GetMicroViaSize();
new_drill = net->GetMicroViaDrillSize();
}
else
{
// Should not occur
}
}
// Old versions set a drill value <= 0, when the default netclass it used
// but it could be better to set the drill value to the actual value
// to avoid issues for existing vias, if the default drill value is modified
// in the netclass, and not in current vias.
if( via->GetDrill() <= 0 ) // means default netclass drill value used
{
initial_drill = -1; // Force drill vias re-initialization
}
}
aTrackItem->SetWidth( new_width );
// make a DRC test because the new size is bigger than the old size
if( initial_width < new_width )
{
int diagdrc = OK_DRC;
if( g_Drc_On )
diagdrc = m_drc->Drc( aTrackItem, GetBoard()->m_Track );
if( diagdrc == OK_DRC )
change_ok = true;
}
else if( initial_width > new_width )
{
change_ok = true;
}
else if( (aTrackItem->Type() == PCB_VIA_T) )
{
// if a via has its drill value changed, force change
if( initial_drill != new_drill )
change_ok = true;
}
if( change_ok )
{
OnModify();
if( aItemsListPicker )
{
aTrackItem->SetWidth( initial_width );
ITEM_PICKER picker( aTrackItem, UR_CHANGED );
picker.SetLink( aTrackItem->Clone() );
aItemsListPicker->PushItem( picker );
aTrackItem->SetWidth( new_width );
if( aTrackItem->Type() == PCB_VIA_T )
{
// Set new drill value. Note: currently microvias have only a default drill value
VIA *via = static_cast<VIA *>( aTrackItem );
if( new_drill > 0 )
via->SetDrill( new_drill );
else
via->SetDrillDefault();
}
}
}
else
{
aTrackItem->SetWidth( initial_width );
}
return change_ok;
}
