void
FlameRegressionTest::CreateDevices ()
{
int64_t streamsUsed = 0;
// 1. setup WiFi
YansWifiPhyHelper wifiPhy = YansWifiPhyHelper::Default ();
// This test suite output was originally based on YansErrorRateModel
wifiPhy.SetErrorRateModel ("ns3::YansErrorRateModel");
YansWifiChannelHelper wifiChannel = YansWifiChannelHelper::Default ();
Ptr<YansWifiChannel> chan = wifiChannel.Create ();
wifiPhy.SetChannel (chan);
// 2. setup mesh
MeshHelper mesh = MeshHelper::Default ();
mesh.SetStackInstaller ("ns3::FlameStack");
mesh.SetMacType ("RandomStart", TimeValue (Seconds (0.1)));
mesh.SetNumberOfInterfaces (1);
NetDeviceContainer meshDevices = mesh.Install (wifiPhy, *m_nodes);
// Three devices, two streams per device
streamsUsed += mesh.AssignStreams (meshDevices, streamsUsed);
NS_TEST_ASSERT_MSG_EQ (streamsUsed, (meshDevices.GetN () * 2), "Stream assignment unexpected value");
streamsUsed += wifiChannel.AssignStreams (chan, streamsUsed);
NS_TEST_ASSERT_MSG_EQ (streamsUsed, (meshDevices.GetN () * 2), "Stream assignment unexpected value");
// 3. setup TCP/IP
InternetStackHelper internetStack;
internetStack.Install (*m_nodes);
Ipv4AddressHelper address;
address.SetBase ("10.1.1.0", "255.255.255.0");
m_interfaces = address.Assign (meshDevices);
// 4. write PCAP if needed
wifiPhy.EnablePcapAll (CreateTempDirFilename (PREFIX));
}
void
AodvExample::CreateDevices ()
{
NqosWifiMacHelper wifiMac = NqosWifiMacHelper::Default ();
wifiMac.SetType ("ns3::AdhocWifiMac");
YansWifiPhyHelper wifiPhy = YansWifiPhyHelper::Default ();
YansWifiChannelHelper wifiChannel = YansWifiChannelHelper::Default ();
wifiPhy.SetChannel (wifiChannel.Create ());
WifiHelper wifi = WifiHelper::Default ();
wifi.SetRemoteStationManager ("ns3::ConstantRateWifiManager", "DataMode", StringValue ("OfdmRate6Mbps"), "RtsCtsThreshold", UintegerValue (0));
devices = wifi.Install (wifiPhy, wifiMac, nodes);
if (pcap)
{
wifiPhy.EnablePcapAll (std::string ("aodv"));
}
}
int
main (int argc, char *argv[])
{
#ifdef NS3_CLICK
//
// Enable logging
//
LogComponentEnable ("NsclickUdpClientServerWifi", LOG_LEVEL_INFO);
//
// Explicitly create the nodes required by the topology (shown above).
//
NS_LOG_INFO ("Create nodes.");
NodeContainer n;
n.Create (4);
NS_LOG_INFO ("Create channels.");
//
// Explicitly create the channels required by the topology (shown above).
//
std::string phyMode ("DsssRate1Mbps");
// disable fragmentation for frames below 2200 bytes
Config::SetDefault ("ns3::WifiRemoteStationManager::FragmentationThreshold", StringValue ("2200"));
// turn off RTS/CTS for frames below 2200 bytes
Config::SetDefault ("ns3::WifiRemoteStationManager::RtsCtsThreshold", StringValue ("2200"));
// Fix non-unicast data rate to be the same as that of unicast
Config::SetDefault ("ns3::WifiRemoteStationManager::NonUnicastMode",
StringValue (phyMode));
WifiHelper wifi;
wifi.SetStandard (WIFI_PHY_STANDARD_80211b);
YansWifiPhyHelper wifiPhy = YansWifiPhyHelper::Default ();
// This is one parameter that matters when using FixedRssLossModel
// set it to zero; otherwise, gain will be added
wifiPhy.Set ("RxGain", DoubleValue (0) );
// ns-3 supports RadioTap and Prism tracing extensions for 802.11b
wifiPhy.SetPcapDataLinkType (YansWifiPhyHelper::DLT_IEEE802_11_RADIO);
YansWifiChannelHelper wifiChannel;
wifiChannel.SetPropagationDelay ("ns3::ConstantSpeedPropagationDelayModel");
// The below FixedRssLossModel will cause the rss to be fixed regardless
// of the distance between the two stations, and the transmit power
wifiChannel.AddPropagationLoss ("ns3::FixedRssLossModel","Rss",DoubleValue (-80));
wifiPhy.SetChannel (wifiChannel.Create ());
// Add a non-QoS upper mac, and disable rate control
NqosWifiMacHelper wifiMac = NqosWifiMacHelper::Default ();
wifi.SetRemoteStationManager ("ns3::ConstantRateWifiManager",
"DataMode",StringValue (phyMode),
"ControlMode",StringValue (phyMode));
// Set it to adhoc mode
wifiMac.SetType ("ns3::AdhocWifiMac");
NetDeviceContainer d = wifi.Install (wifiPhy, wifiMac, n);
MobilityHelper mobility;
Ptr<ListPositionAllocator> positionAlloc = CreateObject<ListPositionAllocator> ();
positionAlloc->Add (Vector (0.0, 0.0, 0.0));
positionAlloc->Add (Vector (10.0, 0.0, 0.0));
positionAlloc->Add (Vector (20.0, 0.0, 0.0));
positionAlloc->Add (Vector (0.0, 10.0, 0.0));
mobility.SetPositionAllocator (positionAlloc);
mobility.SetMobilityModel ("ns3::ConstantPositionMobilityModel");
mobility.Install (n);
//
// Install Click on the nodes
//
ClickInternetStackHelper clickinternet;
clickinternet.SetClickFile (n.Get (0), "src/click/examples/nsclick-wifi-single-interface.click");
clickinternet.SetClickFile (n.Get (1), "src/click/examples/nsclick-wifi-single-interface.click");
clickinternet.SetClickFile (n.Get (2), "src/click/examples/nsclick-wifi-single-interface.click");
// Node 4 is to run in promiscuous mode. This can be verified
// from the pcap trace Node4_in_eth0.pcap generated after running
// this script.
clickinternet.SetClickFile (n.Get (3), "src/click/examples/nsclick-wifi-single-interface-promisc.click");
clickinternet.SetRoutingTableElement (n, "rt");
clickinternet.Install (n);
Ipv4AddressHelper ipv4;
//
// We've got the "hardware" in place. Now we need to add IP addresses.
//
NS_LOG_INFO ("Assign IP Addresses.");
ipv4.SetBase ("172.16.1.0", "255.255.255.0");
Ipv4InterfaceContainer i = ipv4.Assign (d);
NS_LOG_INFO ("Create Applications.");
//
// Create one udpServer applications on node one.
//
uint16_t port = 4000;
UdpServerHelper server (port);
ApplicationContainer apps = server.Install (n.Get (1));
apps.Start (Seconds (1.0));
apps.Stop (Seconds (10.0));
//
// Create one UdpClient application to send UDP datagrams from node zero to
// node one.
//
uint32_t MaxPacketSize = 1024;
Time interPacketInterval = Seconds (0.5);
uint32_t maxPacketCount = 320;
UdpClientHelper client (i.GetAddress (1), port);
client.SetAttribute ("MaxPackets", UintegerValue (maxPacketCount));
client.SetAttribute ("Interval", TimeValue (interPacketInterval));
client.SetAttribute ("PacketSize", UintegerValue (MaxPacketSize));
apps = client.Install (NodeContainer (n.Get (0), n.Get (2)));
apps.Start (Seconds (2.0));
apps.Stop (Seconds (10.0));
wifiPhy.EnablePcap ("nsclick-udp-client-server-wifi", d);
// Force the MAC address of the second node: The current ARP
// implementation of Click sends only one ARP request per incoming
// packet for an unknown destination and does not retransmit if no
// response is received. With the scenario of this example, all ARP
// requests of node 3 are lost due to interference from node
// 1. Hence, we fill in the ARP table of node 2 before at the
// beginning of the simulation
Simulator::Schedule (Seconds (0.5), &ReadArp, n.Get (2)->GetObject<Ipv4ClickRouting> ());
Simulator::Schedule (Seconds (0.6), &WriteArp, n.Get (2)->GetObject<Ipv4ClickRouting> ());
Simulator::Schedule (Seconds (0.7), &ReadArp, n.Get (2)->GetObject<Ipv4ClickRouting> ());
//
// Now, do the actual simulation.
//
NS_LOG_INFO ("Run Simulation.");
Simulator::Stop (Seconds (20.0));
Simulator::Run ();
Simulator::Destroy ();
NS_LOG_INFO ("Done.");
#else
NS_FATAL_ERROR ("Can't use ns-3-click without NSCLICK compiled in");
#endif
}
int main (int argc, char *argv[])
{
std::string phyMode ("DsssRate1Mbps");
double rss = -80; // -dBm
uint32_t packetSize = 1000; // bytes
uint32_t numPackets = 1;
double interval = 1.0; // seconds
bool verbose = false;
CommandLine cmd;
cmd.AddValue ("phyMode", "Wifi Phy mode", phyMode);
cmd.AddValue ("rss", "received signal strength", rss);
cmd.AddValue ("packetSize", "size of application packet sent", packetSize);
cmd.AddValue ("numPackets", "number of packets generated", numPackets);
cmd.AddValue ("interval", "interval (seconds) between packets", interval);
cmd.AddValue ("verbose", "turn on all WifiNetDevice log components", verbose);
cmd.Parse (argc, argv);
// Convert to time object
Time interPacketInterval = Seconds (interval);
// disable fragmentation for frames below 2200 bytes
Config::SetDefault ("ns3::WifiRemoteStationManager::FragmentationThreshold", StringValue ("2200"));
// turn off RTS/CTS for frames below 2200 bytes
Config::SetDefault ("ns3::WifiRemoteStationManager::RtsCtsThreshold", StringValue ("2200"));
// Fix non-unicast data rate to be the same as that of unicast
Config::SetDefault ("ns3::WifiRemoteStationManager::NonUnicastMode",
StringValue (phyMode));
NodeContainer c;
c.Create (2);
// The below set of helpers will help us to put together the wifi NICs we want
WifiHelper wifi;
if (verbose)
{
wifi.EnableLogComponents (); // Turn on all Wifi logging
}
wifi.SetStandard (WIFI_PHY_STANDARD_80211b);
YansWifiPhyHelper wifiPhy = YansWifiPhyHelper::Default ();
// This is one parameter that matters when using FixedRssLossModel
// set it to zero; otherwise, gain will be added
wifiPhy.Set ("RxGain", DoubleValue (0) );
// ns-3 supports RadioTap and Prism tracing extensions for 802.11b
wifiPhy.SetPcapDataLinkType (YansWifiPhyHelper::DLT_IEEE802_11_RADIO);
YansWifiChannelHelper wifiChannel;
wifiChannel.SetPropagationDelay ("ns3::ConstantSpeedPropagationDelayModel");
// The below FixedRssLossModel will cause the rss to be fixed regardless
// of the distance between the two stations, and the transmit power
wifiChannel.AddPropagationLoss ("ns3::FixedRssLossModel","Rss",DoubleValue (rss));
wifiPhy.SetChannel (wifiChannel.Create ());
// Add a non-QoS upper mac, and disable rate control
NqosWifiMacHelper wifiMac = NqosWifiMacHelper::Default ();
wifi.SetRemoteStationManager ("ns3::ConstantRateWifiManager",
"DataMode",StringValue (phyMode),
"ControlMode",StringValue (phyMode));
// Set it to adhoc mode
wifiMac.SetType ("ns3::AdhocWifiMac");
NetDeviceContainer devices = wifi.Install (wifiPhy, wifiMac, c);
// Note that with FixedRssLossModel, the positions below are not
// used for received signal strength.
MobilityHelper mobility;
Ptr<ListPositionAllocator> positionAlloc = CreateObject<ListPositionAllocator> ();
positionAlloc->Add (Vector (0.0, 0.0, 0.0));
positionAlloc->Add (Vector (5.0, 0.0, 0.0));
mobility.SetPositionAllocator (positionAlloc);
mobility.SetMobilityModel ("ns3::ConstantPositionMobilityModel");
mobility.Install (c);
InternetStackHelper internet;
internet.Install (c);
Ipv4AddressHelper ipv4;
NS_LOG_INFO ("Assign IP Addresses.");
ipv4.SetBase ("10.1.1.0", "255.255.255.0");
Ipv4InterfaceContainer i = ipv4.Assign (devices);
TypeId tid = TypeId::LookupByName ("ns3::UdpSocketFactory");
Ptr<Socket> recvSink = Socket::CreateSocket (c.Get (0), tid);
InetSocketAddress local = InetSocketAddress (Ipv4Address::GetAny (), 80);
recvSink->Bind (local);
recvSink->SetRecvCallback (MakeCallback (&ReceivePacket));
Ptr<Socket> source = Socket::CreateSocket (c.Get (1), tid);
InetSocketAddress remote = InetSocketAddress (Ipv4Address ("255.255.255.255"), 80);
source->SetAllowBroadcast (true);
source->Connect (remote);
// Tracing
wifiPhy.EnablePcap ("wifi-simple-adhoc", devices);
// Output what we are doing
NS_LOG_UNCOND ("Testing " << numPackets << " packets sent with receiver rss " << rss );
Simulator::ScheduleWithContext (source->GetNode ()->GetId (),
Seconds (1.0), &GenerateTraffic,
source, packetSize, numPackets, interPacketInterval);
Simulator::Run ();
Simulator::Destroy ();
return 0;
}
int main (int argc, char *argv[])
{
std::string phyMode ("DsssRate1Mbps");
double distance = 500; // m
uint32_t packetSize = 1000; // bytes
uint32_t numPackets = 1;
uint32_t numNodes = 25; // by default, 5x5
uint32_t sinkNode = 0;
uint32_t sourceNode = 24;
double interval = 1.0; // seconds
bool verbose = false;
bool tracing = false;
CommandLine cmd;
cmd.AddValue ("phyMode", "Wifi Phy mode", phyMode);
cmd.AddValue ("distance", "distance (m)", distance);
cmd.AddValue ("packetSize", "size of application packet sent", packetSize);
cmd.AddValue ("numPackets", "number of packets generated", numPackets);
cmd.AddValue ("interval", "interval (seconds) between packets", interval);
cmd.AddValue ("verbose", "turn on all WifiNetDevice log components", verbose);
cmd.AddValue ("tracing", "turn on ascii and pcap tracing", tracing);
cmd.AddValue ("numNodes", "number of nodes", numNodes);
cmd.AddValue ("sinkNode", "Receiver node number", sinkNode);
cmd.AddValue ("sourceNode", "Sender node number", sourceNode);
cmd.Parse (argc, argv);
// Convert to time object
Time interPacketInterval = Seconds (interval);
// disable fragmentation for frames below 2200 bytes
Config::SetDefault ("ns3::WifiRemoteStationManager::FragmentationThreshold", StringValue ("2200"));
// turn off RTS/CTS for frames below 2200 bytes
Config::SetDefault ("ns3::WifiRemoteStationManager::RtsCtsThreshold", StringValue ("2200"));
// Fix non-unicast data rate to be the same as that of unicast
Config::SetDefault ("ns3::WifiRemoteStationManager::NonUnicastMode",
StringValue (phyMode));
NodeContainer c;
c.Create (numNodes);
// The below set of helpers will help us to put together the wifi NICs we want
WifiHelper wifi;
if (verbose)
{
wifi.EnableLogComponents (); // Turn on all Wifi logging
}
YansWifiPhyHelper wifiPhy = YansWifiPhyHelper::Default ();
// set it to zero; otherwise, gain will be added
wifiPhy.Set ("RxGain", DoubleValue (-10) );
// ns-3 supports RadioTap and Prism tracing extensions for 802.11b
wifiPhy.SetPcapDataLinkType (YansWifiPhyHelper::DLT_IEEE802_11_RADIO);
YansWifiChannelHelper wifiChannel;
wifiChannel.SetPropagationDelay ("ns3::ConstantSpeedPropagationDelayModel");
wifiChannel.AddPropagationLoss ("ns3::FriisPropagationLossModel");
wifiPhy.SetChannel (wifiChannel.Create ());
// Add a non-QoS upper mac, and disable rate control
NqosWifiMacHelper wifiMac = NqosWifiMacHelper::Default ();
wifi.SetStandard (WIFI_PHY_STANDARD_80211b);
wifi.SetRemoteStationManager ("ns3::ConstantRateWifiManager",
"DataMode",StringValue (phyMode),
"ControlMode",StringValue (phyMode));
// Set it to adhoc mode
wifiMac.SetType ("ns3::AdhocWifiMac");
NetDeviceContainer devices = wifi.Install (wifiPhy, wifiMac, c);
MobilityHelper mobility;
mobility.SetPositionAllocator ("ns3::GridPositionAllocator",
"MinX", DoubleValue (0.0),
"MinY", DoubleValue (0.0),
"DeltaX", DoubleValue (distance),
"DeltaY", DoubleValue (distance),
"GridWidth", UintegerValue (5),
"LayoutType", StringValue ("RowFirst"));
mobility.SetMobilityModel ("ns3::ConstantPositionMobilityModel");
mobility.Install (c);
// Enable OLSR
OlsrHelper olsr;
Ipv4StaticRoutingHelper staticRouting;
Ipv4ListRoutingHelper list;
list.Add (staticRouting, 0);
list.Add (olsr, 10);
InternetStackHelper internet;
internet.SetRoutingHelper (list); // has effect on the next Install ()
internet.Install (c);
Ipv4AddressHelper ipv4;
NS_LOG_INFO ("Assign IP Addresses.");
ipv4.SetBase ("10.1.1.0", "255.255.255.0");
Ipv4InterfaceContainer i = ipv4.Assign (devices);
TypeId tid = TypeId::LookupByName ("ns3::UdpSocketFactory");
Ptr<Socket> recvSink = Socket::CreateSocket (c.Get (sinkNode), tid);
InetSocketAddress local = InetSocketAddress (Ipv4Address::GetAny (), 80);
recvSink->Bind (local);
recvSink->SetRecvCallback (MakeCallback (&ReceivePacket));
Ptr<Socket> source = Socket::CreateSocket (c.Get (sourceNode), tid);
InetSocketAddress remote = InetSocketAddress (i.GetAddress (sinkNode, 0), 80);
source->Connect (remote);
if (tracing == true)
{
AsciiTraceHelper ascii;
wifiPhy.EnableAsciiAll (ascii.CreateFileStream ("wifi-simple-adhoc-grid.tr"));
wifiPhy.EnablePcap ("wifi-simple-adhoc-grid", devices);
// Trace routing tables
Ptr<OutputStreamWrapper> routingStream = Create<OutputStreamWrapper> ("wifi-simple-adhoc-grid.routes", std::ios::out);
olsr.PrintRoutingTableAllEvery (Seconds (2), routingStream);
// To do-- enable an IP-level trace that shows forwarding events only
}
// Give OLSR time to converge-- 30 seconds perhaps
Simulator::Schedule (Seconds (30.0), &GenerateTraffic,
source, packetSize, numPackets, interPacketInterval);
// Output what we are doing
NS_LOG_UNCOND ("Testing from node " << sourceNode << " to " << sinkNode << " with grid distance " << distance);
Simulator::Stop (Seconds (32.0));
Simulator::Run ();
Simulator::Destroy ();
return 0;
}
int main (int argc, char *argv[])
{
uint32_t nWifis = 2;
uint32_t nStas = 2;
bool sendIp = true;
bool writeMobility = false;
CommandLine cmd;
cmd.AddValue ("nWifis", "Number of wifi networks", nWifis);
cmd.AddValue ("nStas", "Number of stations per wifi network", nStas);
cmd.AddValue ("SendIp", "Send Ipv4 or raw packets", sendIp);
cmd.AddValue ("writeMobility", "Write mobility trace", writeMobility);
cmd.Parse (argc, argv);
NodeContainer backboneNodes;
NetDeviceContainer backboneDevices;
Ipv4InterfaceContainer backboneInterfaces;
std::vector<NodeContainer> staNodes;
std::vector<NetDeviceContainer> staDevices;
std::vector<NetDeviceContainer> apDevices;
std::vector<Ipv4InterfaceContainer> staInterfaces;
std::vector<Ipv4InterfaceContainer> apInterfaces;
InternetStackHelper stack;
CsmaHelper csma;
Ipv4AddressHelper ip;
ip.SetBase ("192.168.0.0", "255.255.255.0");
backboneNodes.Create (nWifis);
stack.Install (backboneNodes);
backboneDevices = csma.Install (backboneNodes);
double wifiX = 0.0;
YansWifiPhyHelper wifiPhy = YansWifiPhyHelper::Default ();
wifiPhy.SetPcapDataLinkType (YansWifiPhyHelper::DLT_IEEE802_11_RADIO);
for (uint32_t i = 0; i < nWifis; ++i)
{
// calculate ssid for wifi subnetwork
std::ostringstream oss;
oss << "wifi-default-" << i;
Ssid ssid = Ssid (oss.str ());
NodeContainer sta;
NetDeviceContainer staDev;
NetDeviceContainer apDev;
Ipv4InterfaceContainer staInterface;
Ipv4InterfaceContainer apInterface;
MobilityHelper mobility;
BridgeHelper bridge;
WifiHelper wifi = WifiHelper::Default ();
NqosWifiMacHelper wifiMac = NqosWifiMacHelper::Default ();
YansWifiChannelHelper wifiChannel = YansWifiChannelHelper::Default ();
wifiPhy.SetChannel (wifiChannel.Create ());
sta.Create (nStas);
mobility.SetPositionAllocator ("ns3::GridPositionAllocator",
"MinX", DoubleValue (wifiX),
"MinY", DoubleValue (0.0),
"DeltaX", DoubleValue (5.0),
"DeltaY", DoubleValue (5.0),
"GridWidth", UintegerValue (1),
"LayoutType", StringValue ("RowFirst"));
// setup the AP.
mobility.SetMobilityModel ("ns3::ConstantPositionMobilityModel");
mobility.Install (backboneNodes.Get (i));
wifiMac.SetType ("ns3::ApWifiMac",
"Ssid", SsidValue (ssid));
apDev = wifi.Install (wifiPhy, wifiMac, backboneNodes.Get (i));
NetDeviceContainer bridgeDev;
bridgeDev = bridge.Install (backboneNodes.Get (i), NetDeviceContainer (apDev, backboneDevices.Get (i)));
// assign AP IP address to bridge, not wifi
apInterface = ip.Assign (bridgeDev);
// setup the STAs
stack.Install (sta);
mobility.SetMobilityModel ("ns3::RandomWalk2dMobilityModel",
"Mode", StringValue ("Time"),
"Time", StringValue ("2s"),
"Speed", StringValue ("ns3::ConstantRandomVariable[Constant=1.0]"),
"Bounds", RectangleValue (Rectangle (wifiX, wifiX+5.0,0.0, (nStas+1)*5.0)));
mobility.Install (sta);
wifiMac.SetType ("ns3::StaWifiMac",
"Ssid", SsidValue (ssid),
"ActiveProbing", BooleanValue (false));
staDev = wifi.Install (wifiPhy, wifiMac, sta);
staInterface = ip.Assign (staDev);
// save everything in containers.
staNodes.push_back (sta);
apDevices.push_back (apDev);
apInterfaces.push_back (apInterface);
staDevices.push_back (staDev);
staInterfaces.push_back (staInterface);
wifiX += 20.0;
}
Address dest;
std::string protocol;
if (sendIp)
{
dest = InetSocketAddress (staInterfaces[1].GetAddress (1), 1025);
protocol = "ns3::UdpSocketFactory";
}
else
{
PacketSocketAddress tmp;
tmp.SetSingleDevice (staDevices[0].Get (0)->GetIfIndex ());
tmp.SetPhysicalAddress (staDevices[1].Get (0)->GetAddress ());
tmp.SetProtocol (0x807);
dest = tmp;
protocol = "ns3::PacketSocketFactory";
}
OnOffHelper onoff = OnOffHelper (protocol, dest);
onoff.SetConstantRate (DataRate ("500kb/s"));
ApplicationContainer apps = onoff.Install (staNodes[0].Get (0));
apps.Start (Seconds (0.5));
apps.Stop (Seconds (3.0));
wifiPhy.EnablePcap ("wifi-wired-bridging", apDevices[0]);
wifiPhy.EnablePcap ("wifi-wired-bridging", apDevices[1]);
if (writeMobility)
{
AsciiTraceHelper ascii;
MobilityHelper::EnableAsciiAll (ascii.CreateFileStream ("wifi-wired-bridging.mob"));
}
Simulator::Stop (Seconds (5.0));
Simulator::Run ();
Simulator::Destroy ();
}
int
main(int argc, char* argv[])
{
// setting default parameters for Wifi
// enable rts cts all the time.
Config::SetDefault ("ns3::WifiRemoteStationManager::RtsCtsThreshold", StringValue ("0"));
// disable fragmentation
Config::SetDefault ("ns3::WifiRemoteStationManager::FragmentationThreshold", StringValue ("2200"));
Config::SetDefault("ns3::WifiRemoteStationManager::NonUnicastMode",
StringValue("OfdmRate24Mbps"));
// setting default parameters for PointToPoint links and channels
Config::SetDefault("ns3::PointToPointNetDevice::DataRate", StringValue("1Mbps"));
Config::SetDefault("ns3::PointToPointChannel::Delay", StringValue("10ms"));
Config::SetDefault("ns3::DropTailQueue::MaxPackets", StringValue("20"));
std::uint32_t max_routers = 1;
std::string cSize = "100";
std::string cSplit = "75";
// Read optional command-line parameters (e.g., enable visualizer with ./waf --run=<> --visualize
CommandLine cmd;
cmd.AddValue("cSize", "Cache Size", cSize);
cmd.AddValue("cSplit", "Cache Split", cSplit);
cmd.AddValue("routers", "number of routers", max_routers);
cmd.Parse(argc, argv);
Packet::EnablePrinting ();
// Wifi config
WifiHelper wifi = WifiHelper::Default ();
// Nodes
NodeContainer sta_consumers;
NodeContainer sta_mobile_consumers;
NodeContainer ap;
NodeContainer routers;
NodeContainer producers;
// ??
NetDeviceContainer staDevs;
PacketSocketHelper packetSocket;
// 5 stationary consumers, 5 mobile, 4 APs and 1 router
sta_consumers.Create(3*max_routers);
sta_mobile_consumers.Create(7*max_routers);
ap.Create (5*max_routers);
routers.Create(max_routers);
producers.Create(1);
// give packet socket powers to nodes.
packetSocket.Install(sta_mobile_consumers);
packetSocket.Install(sta_consumers);
packetSocket.Install (ap);
// Wifi Config
NqosWifiMacHelper wifiMac = NqosWifiMacHelper::Default ();
YansWifiPhyHelper wifiPhy = YansWifiPhyHelper::Default ();
YansWifiChannelHelper wifiChannel = YansWifiChannelHelper::Default ();
wifiPhy.SetChannel (wifiChannel.Create ());
wifiPhy.Set("TxPowerStart", DoubleValue(5));
wifiPhy.Set("TxPowerEnd", DoubleValue(5));
Ssid ssid = Ssid ("wifi-default");
wifi.SetRemoteStationManager ("ns3::ArfWifiManager");
// setup stas.
wifiMac.SetType ("ns3::StaWifiMac",
"Ssid", SsidValue (ssid),
"ActiveProbing", BooleanValue (false));
// install wifi
wifi.Install(wifiPhy, wifiMac, sta_mobile_consumers);
wifi.Install(wifiPhy, wifiMac, sta_consumers);
// setup ap.
wifiMac.SetType ("ns3::ApWifiMac",
"Ssid", SsidValue (ssid));
wifi.Install (wifiPhy, wifiMac, ap);
// Mobility config -- Change max_routers value to change size of sim
int number_rows = sqrt(max_routers);
int x = 0;
int y = 0;
int pos_counter = 0;
Ptr<UniformRandomVariable> randomizerX = CreateObject<UniformRandomVariable>();
Ptr<UniformRandomVariable> randomizerY = CreateObject<UniformRandomVariable>();
MobilityHelper stationary_mobility;
stationary_mobility.SetMobilityModel("ns3::ConstantPositionMobilityModel");
MobilityHelper mobility;
mobility.SetMobilityModel("ns3::GaussMarkovMobilityModel", "Bounds", BoxValue(Box (0, number_rows*10, 0, number_rows*10, 0, 0)),
"TimeStep", TimeValue(Seconds(1)));
// Place router in center of box
randomizerX->SetAttribute("Min", DoubleValue(5));
randomizerX->SetAttribute("Max", DoubleValue(5));
randomizerY->SetAttribute("Min", DoubleValue(5));
randomizerY->SetAttribute("Max", DoubleValue(5));
stationary_mobility.SetPositionAllocator("ns3::RandomBoxPositionAllocator", "X", PointerValue(randomizerX),
"Y", PointerValue(randomizerY));
// Install on routers
stationary_mobility.Install(producers.Get(0));
// p2p helper
PointToPointHelper p2p;
// for each row
for (int i=0; i < number_rows; i++)
{
x = i * 10 + 5;
// for each column
for (int j=0; j < number_rows; j++)
{
y = j * 10 + 5;
// Place router in center of box
randomizerX->SetAttribute("Min", DoubleValue(x));
randomizerX->SetAttribute("Max", DoubleValue(x));
randomizerY->SetAttribute("Min", DoubleValue(y));
randomizerY->SetAttribute("Max", DoubleValue(y));
stationary_mobility.SetPositionAllocator("ns3::RandomBoxPositionAllocator", "X", PointerValue(randomizerX),
"Y", PointerValue(randomizerY));
// Install on routers
stationary_mobility.Install(routers.Get(pos_counter));
// Set box (center +/-5)
randomizerX->SetAttribute("Min", DoubleValue(x-5));
randomizerX->SetAttribute("Max", DoubleValue(x+5));
randomizerY->SetAttribute("Min", DoubleValue(y-5));
randomizerY->SetAttribute("Max", DoubleValue(y+5));
// Connect router to previous if not 1
if (pos_counter == 0)
{
p2p.Install(routers.Get(0), producers.Get(0));
}
else // Otherwise connect to router behind you
{
p2p.Install(routers.Get(pos_counter), routers.Get(pos_counter-1));
}
// APs
for (int k=0; k < 5; k++)
{
stationary_mobility.SetPositionAllocator("ns3::RandomBoxPositionAllocator", "X", PointerValue(randomizerX),
"Y", PointerValue(randomizerY));
stationary_mobility.Install(ap.Get(pos_counter * 5 + k));
p2p.Install(routers.Get(pos_counter), ap.Get(pos_counter * 5 + k));
}
// Consumers (stationary)
for (int l=0; l < 3; l++)
{
stationary_mobility.SetPositionAllocator("ns3::RandomBoxPositionAllocator", "X", PointerValue(randomizerX),
"Y", PointerValue(randomizerY));
stationary_mobility.Install(sta_consumers.Get(pos_counter * 3 + l));
}
// Consumers (Mobile)
for (int m=0; m < 7; m++)
{
mobility.SetPositionAllocator("ns3::RandomBoxPositionAllocator", "X", PointerValue(randomizerX),
"Y", PointerValue(randomizerY));
mobility.Install(sta_mobile_consumers.Get(pos_counter * 7 + m));
}
// Keep track of overall position
pos_counter++;
}
}
// Install NDN stack on all nodes
ndn::StackHelper ndnHelper;
ndnHelper.SetDefaultRoutes(true);
ndnHelper.SetOldContentStore("ns3::ndn::cs::Splitcache",
"NormalPolicy", "ns3::ndn::cs::Lru",
"SpecialPolicy", "ns3::ndn::cs::Lfu",
"TotalCacheSize", cSize,
"Configure", cSplit);
// Percentage Special^
//ndnHelper.SetOldContentStore("ns3::ndn::cs::Lru");
ndnHelper.Install(ap);
ndnHelper.Install(routers);
ndnHelper.SetOldContentStore("ns3::ndn::cs::Nocache");
ndnHelper.Install(sta_consumers);
ndnHelper.Install(sta_mobile_consumers);
ndnHelper.Install(producers);
// Choosing forwarding strategy
ndn::StrategyChoiceHelper::Install(sta_consumers, "/", "/localhost/nfd/strategy/best-route");
ndn::StrategyChoiceHelper::Install(sta_mobile_consumers, "/", "/localhost/nfd/strategy/best-route");
ndn::StrategyChoiceHelper::Install(ap, "/", "/localhost/nfd/strategy/best-route");
ndn::StrategyChoiceHelper::Install(routers, "/", "/localhost/nfd/strategy/best-route");
ndn::StrategyChoiceHelper::Install(producers, "/", "/localhost/nfd/strategy/best-route");
// Installing applications
// Consumer (basic and special data)
ndn::AppHelper consumerHelper("ns3::ndn::ConsumerZipfMandelbrot");
consumerHelper.SetAttribute("NumberOfContents", StringValue("100")); // 10 different contents
// Consumer will request /prefix/0, /prefix/1, ...
// Basic consumers request basic data (and pumpkin spice coffee)
consumerHelper.SetPrefix("data/basic");
consumerHelper.SetAttribute("Frequency", StringValue("10")); // 1 interests a second
consumerHelper.Install(sta_consumers);
// Mobile consumers request special data only
consumerHelper.SetPrefix("data/special");
consumerHelper.SetAttribute("Frequency", StringValue("10")); // 2 interests a second
consumerHelper.Install(sta_mobile_consumers);
// Producer
ndn::AppHelper producerHelper("ns3::ndn::Producer");
// Producer will reply to all requests starting with /prefix
producerHelper.SetPrefix("/data");
producerHelper.SetAttribute("PayloadSize", StringValue("1024"));
producerHelper.SetAttribute("Freshness", TimeValue(Seconds(-1.0))); // unlimited freshness
producerHelper.Install(producers);
// Tracers 'n stuff
//AthstatsHelper athstats;
//athstats.EnableAthstats("athstats-sta", sta_mobile_consumers);
//athstats.EnableAthstats("athstats-sta", sta_consumers);
//athstats.EnableAthstats ("athstats-ap", ap);
ndn::AppDelayTracer::Install(sta_consumers, "app-delays-trace-stationary-03.txt");
ndn::AppDelayTracer::Install(sta_mobile_consumers, "app-delays-trace-mobile-03.txt");
ndn::CsTracer::Install(ap, "cs-trace-ap-03.txt", Seconds(1));
ndn::CsTracer::Install(routers, "cs-trace-routers-03.txt", Seconds(1));
// 10 min
Simulator::Stop(Seconds(600.0));
Simulator::Run();
Simulator::Destroy();
return 0;
}
int
main (int argc, char *argv[])
{
std::string mode = "ConfigureLocal";
std::string tapName = "thetap";
CommandLine cmd;
cmd.AddValue ("mode", "Mode setting of TapBridge", mode);
cmd.AddValue ("tapName", "Name of the OS tap device", tapName);
cmd.Parse (argc, argv);
GlobalValue::Bind ("SimulatorImplementationType", StringValue ("ns3::RealtimeSimulatorImpl"));
GlobalValue::Bind ("ChecksumEnabled", BooleanValue (true));
//
// The topology has a Wifi network of four nodes on the left side. We'll make
// node zero the AP and have the other three will be the STAs.
//
NodeContainer nodesLeft;
nodesLeft.Create (4);
YansWifiPhyHelper wifiPhy = YansWifiPhyHelper::Default ();
YansWifiChannelHelper wifiChannel = YansWifiChannelHelper::Default ();
wifiPhy.SetChannel (wifiChannel.Create ());
Ssid ssid = Ssid ("left");
WifiHelper wifi = WifiHelper::Default ();
NqosWifiMacHelper wifiMac = NqosWifiMacHelper::Default ();
wifi.SetRemoteStationManager ("ns3::ArfWifiManager");
wifiMac.SetType ("ns3::ApWifiMac",
"Ssid", SsidValue (ssid));
NetDeviceContainer devicesLeft = wifi.Install (wifiPhy, wifiMac, nodesLeft.Get (0));
wifiMac.SetType ("ns3::StaWifiMac",
"Ssid", SsidValue (ssid),
"ActiveProbing", BooleanValue (false));
devicesLeft.Add (wifi.Install (wifiPhy, wifiMac, NodeContainer (nodesLeft.Get (1), nodesLeft.Get (2), nodesLeft.Get (3))));
MobilityHelper mobility;
mobility.Install (nodesLeft);
InternetStackHelper internetLeft;
internetLeft.Install (nodesLeft);
Ipv4AddressHelper ipv4Left;
ipv4Left.SetBase ("10.1.1.0", "255.255.255.0");
Ipv4InterfaceContainer interfacesLeft = ipv4Left.Assign (devicesLeft);
TapBridgeHelper tapBridge (interfacesLeft.GetAddress (1));
tapBridge.SetAttribute ("Mode", StringValue (mode));
tapBridge.SetAttribute ("DeviceName", StringValue (tapName));
tapBridge.Install (nodesLeft.Get (0), devicesLeft.Get (0));
//
// Now, create the right side.
//
NodeContainer nodesRight;
nodesRight.Create (4);
CsmaHelper csmaRight;
csmaRight.SetChannelAttribute ("DataRate", DataRateValue (5000000));
csmaRight.SetChannelAttribute ("Delay", TimeValue (MilliSeconds (2)));
NetDeviceContainer devicesRight = csmaRight.Install (nodesRight);
InternetStackHelper internetRight;
internetRight.Install (nodesRight);
Ipv4AddressHelper ipv4Right;
ipv4Right.SetBase ("10.1.3.0", "255.255.255.0");
Ipv4InterfaceContainer interfacesRight = ipv4Right.Assign (devicesRight);
//
// Stick in the point-to-point line between the sides.
//
PointToPointHelper p2p;
p2p.SetDeviceAttribute ("DataRate", StringValue ("512kbps"));
p2p.SetChannelAttribute ("Delay", StringValue ("10ms"));
NodeContainer nodes = NodeContainer (nodesLeft.Get (3), nodesRight.Get (0));
NetDeviceContainer devices = p2p.Install (nodes);
Ipv4AddressHelper ipv4;
ipv4.SetBase ("10.1.2.0", "255.255.255.192");
Ipv4InterfaceContainer interfaces = ipv4.Assign (devices);
//
// Simulate some CBR traffic over the point-to-point link
//
uint16_t port = 9; // Discard port (RFC 863)
OnOffHelper onoff ("ns3::UdpSocketFactory", InetSocketAddress (interfaces.GetAddress (1), port));
onoff.SetConstantRate (DataRate ("500kb/s"));
ApplicationContainer apps = onoff.Install (nodesLeft.Get (3));
apps.Start (Seconds (1.0));
// Create a packet sink to receive these packets
PacketSinkHelper sink ("ns3::UdpSocketFactory", InetSocketAddress (Ipv4Address::GetAny (), port));
apps = sink.Install (nodesRight.Get (0));
apps.Start (Seconds (1.0));
wifiPhy.EnablePcapAll ("tap-wifi-dumbbell");
csmaRight.EnablePcapAll ("tap-wifi-dumbbell", false);
Ipv4GlobalRoutingHelper::PopulateRoutingTables ();
Simulator::Stop (Seconds (60.));
Simulator::Run ();
Simulator::Destroy ();
}