void mxExportPreview::OnProcTerminate (wxProcessEvent & event) {
_LOG("mxExportPreview::OnProcessTerminate");
if (pid<=0||!the_process||event.GetPid()!=pid) return;
int exit_code = event.GetExitCode();
delete the_process;
the_process=NULL;
if (exit_code!=0) {
SetMessage(_Z("Error al intentar exportar"));
state=mxEP_NONE;
return;
}
switch(state) {
case mxEP_NONE: { // no deberia pasar nunca
return;
}
break;
case mxEP_CHECK: { // estaba armando el psd, ahora exportar
wxString command;
command<<config->psexport_command<<_T(" \"")<<temp_filename<<".psd"<<_T("\" \"")<<temp_filename<<".exp"<<_T("\"");
if (config->lang[LS_BASE_ZERO_ARRAYS]) command<<_T(" --base_zero_arrays=1");
int lang_id = mxID_FILE_EXPORT_LANG_FIRST+1+combo_lang->GetCurrentSelection();
command<<" --lang="<<utils->GetExportLangCode(lang_id);
the_process = new wxProcess(this->GetEventHandler());
_LOG("mxExportPreview, command="<<command);
pid = wxExecute(command,wxEXEC_ASYNC,the_process);
state = mxEP_EXP;
}
break;
case mxEP_EXP: { // estaba exportando, mostrar
state = mxEP_NONE;
code_ctrl->LoadFile(temp_filename+".exp");
}
break;
case mxEP_UPDATE: { // se interrumpio lo que estaba haciendo para empezar otra vez
pid = 0;
state = mxEP_NONE;
UpdatePrev();
}
break;
default:
break;
}
}
void VersionChecker::OnTerminate(wxProcessEvent& e) {
assert(m_process);
// if version check returned correctly and print sth.
// otherwise there is a bug!
if( e.GetExitCode() == 255 && m_process->IsInputAvailable()) {
wxTextInputStream is(*m_process->GetInputStream());
wxString version = is.ReadLine();
if (version != SC::A2S(SZARP_VERSION))
m_is_new_version = true;
} else {
wxLogError( _("This should never happen. Probably there is a bug in version checking.") );
std::wcerr << "Dump stdout:" << std::endl;
DumpStream( m_process->GetInputStream() );
std::wcerr << "Dump stderr:" << std::endl;
DumpStream( m_process->GetErrorStream() );
}
delete m_process;
m_process = NULL;
if (m_is_new_version) {
ShowNewVersionMessage();
NotifyNewVersionAvailable();
} else
Start();
}
void SigUIFrame::OnTerminateInstall(wxProcessEvent &event)
{
wxEndBusyCursor();
wxWakeUpIdle();
if (event.GetExitCode() == 0) {
m_sig_candidates->Clear();
wxLogMessage(_("Successfully installed new virus signatures\n"));
reload();
} else {
bool had_errors = false;
wxInputStream *err = m_siginst_process->GetErrorStream();
wxTextInputStream tis(*err);
while (!err->Eof()) {
wxString line = tis.ReadLine();
line.Trim();
if (!line.IsEmpty()) {
wxLogWarning("%s", line);
had_errors = true;
}
}
if (had_errors) {
wxLogError(_("Errors encountered during virus signature install"));
}
}
delete m_siginst_process;
m_panel_sigman->Enable();
}
void Instance::OnInstProcExited(wxProcessEvent& event)
{
m_running = false;
printf("Instance exited with code %i.\n", event.GetExitCode());
if (evtHandler != NULL)
{
evtHandler->AddPendingEvent(event);
}
}
void PipedProcessCtrl::OnEndProcess(wxProcessEvent &event)
{
m_exitcode=event.GetExitCode();
SyncOutput(-1); //read any left over output TODO: while loop to handle extremely large amount of output
m_dead=true;
delete m_proc;
m_proc=NULL;
m_killlevel=0;
if(m_shellmgr)
m_shellmgr->OnShellTerminate(this);
}
void mxConsole::OnProcessTerminate( wxProcessEvent &event ) {
if (event.GetPid()==the_process_pid) {
GetProcessOutput(false);
want_input=false;
Refresh();
the_process->Detach();
the_process=NULL;
timer_process->Stop();
parent->OnProcessTerminated();
}
}
void AsyncExeCmd::ProcessEnd(wxProcessEvent& event)
{
//read all input before stopping the timer
if( !m_stop ){
PrintOutput();
}
m_timer->Stop();
m_busy = false;
m_stop = false;
SendEndMsg(event.GetExitCode());
}
void
job_run_dialog::on_end_process(wxProcessEvent &evt) {
process_input();
int ndx = jobs_to_start[current_job];
int exit_code = evt.GetExitCode();
bool remove_job;
wxString status;
if (abort) {
jobs[ndx].status = JOBS_ABORTED;
status = Z("aborted");
remove_job = false;
} else if (0 == exit_code) {
jobs[ndx].status = JOBS_DONE;
status = Z("completed OK");
remove_job = CJAR_NEVER != mdlg->options.clear_job_after_run_mode;
} else if (1 == exit_code) {
jobs[ndx].status = JOBS_DONE_WARNINGS;
status = Z("completed with warnings");
remove_job = (CJAR_ALWAYS == mdlg->options.clear_job_after_run_mode) || (CJAR_WARNINGS == mdlg->options.clear_job_after_run_mode);
} else {
jobs[ndx].status = JOBS_FAILED;
status = Z("failed");
remove_job = CJAR_ALWAYS == mdlg->options.clear_job_after_run_mode;
}
jobs[ndx].finished_on = wxGetUTCTime();
add_to_log(wxString::Format(Z("Finished job ID %d on %s: status '%s'"), jobs[ndx].id, format_date_time(jobs[ndx].finished_on).c_str(), status.c_str()));
if (remove_job) {
jobs.erase(jobs.begin() + ndx, jobs.begin() + ndx + 1);
for (auto idx = 0u; jobs_to_start.size() > idx; ++idx)
if (jobs_to_start[idx] >= ndx)
jobs_to_start[idx]--;
}
mdlg->save_job_queue();
delete process;
process = nullptr;
out = nullptr;
wxRemoveFile(opt_file_name);
if (!abort)
g_jobs->SetValue((current_job + 1) * 100);
start_next_job();
}
void wxLuaDebuggerBase::OnEndDebugeeProcess(wxProcessEvent& event)
{
//wxPrintf(wxT("OnEndDebugeeProcess the m_debuggeeProcess %p %d exists %d\n"), m_debuggeeProcess, m_debuggeeProcessID, wxProcess::Exists(m_debuggeeProcessID)); fflush(stdout);
// The process's OnTerminate will null m_debuggeeProcess,
// but if in destructor it's already NULL and don't send event.
if (m_debuggeeProcess != NULL)
{
wxLuaDebuggerEvent debugEvent(wxEVT_WXLUA_DEBUGGER_EXIT, this);
debugEvent.SetMessage(wxString::Format(wxT("Process (%d) ended with exit code : %d"), event.GetPid(), event.GetExitCode()));
wxPostEvent(this, debugEvent);
}
event.Skip();
}
void MyProcessOutput::OnTerminate(wxProcessEvent &event)
{
m_wakeup.Stop();
// show all output
while (processInput()) {}
int exit = event.GetExitCode();
delete m_process;
m_process = 0;
m_cancel_process->SetLabel(_("&Close window"));
wxString msg;
msg << _("Freshclam exited with code: ") << exit;
m_logoutput->Append(msg);
}
void MainWindow::OnFRED2Exited(wxProcessEvent &event) {
if ( this->FRED2_pid == 0 ) {
wxLogError(_T("OnFRED2Exited called before there is a process running"));
return;
}
int exitCode = event.GetExitCode();
wxLogInfo(_T("FRED2 Open exited with a status of %d"), exitCode);
delete this->process;
this->process = NULL;
this->FRED2_pid = 0;
wxButton* fred = dynamic_cast<wxButton*>(
wxWindow::FindWindowById(ID_FRED_BUTTON, this));
wxCHECK_RET(fred != NULL, _T("Unable to find FRED button"));
fred->SetLabel(_T("FRED"));
fred->Enable();
}
void PreviewDlg::OnEndProcess(wxProcessEvent& event) {
m_thread = NULL;
if (event.GetExitCode() == -1) return;
RefreshBrowser(cxUPDATE_REFRESH);
}
void frmRestore::OnEndProcess(wxProcessEvent& ev)
{
ExternProcessDialog::OnEndProcess(ev);
if (done && viewRunning && !ev.GetExitCode())
{
done = false;
wxString str=wxTextBuffer::Translate(txtMessages->GetValue(), wxTextFileType_Unix);
wxStringTokenizer line(str, wxT("\n"));
line.GetNextToken();
wxBeginBusyCursor();
wxString i18nbackup = _("Backup");
wxTreeItemId root = ctvObjects->AddRoot(i18nbackup + wxT(" ") + txtFilename->GetValue());
wxString currentSchema = wxT("");
wxTreeItemId currentSchemaNode;
wxTreeItemId schemaNode, lastItem;
wxTreeItemIdValue schemaNodeData;
numberOfTOCItems = 0;
while (line.HasMoreTokens())
{
// Read the next line
str=line.GetNextToken();
// Skip the few lines of comments
if (str.Left(1) == wxT(";") || str.Left(1) == wxT("P"))
continue;
// Split the line according to spaces
wxStringTokenizer col(str, wxT(" "));
// Column 1 (dumpId)
col.GetNextToken();
// Column 2 (tableOid)
col.GetNextToken();
// Column 3 (oid)
col.GetNextToken();
// Column 4 (desc)
// First interesting information: object's type
wxString type=col.GetNextToken();
if (type == wxT("PROCEDURAL"))
{
// type for a PL is PROCEDURAL LANGUAGE
// we'll keep the next column for the object's type
type = col.GetNextToken();
}
else if (type == wxT("SHELL"))
{
// type for a SHELL is SHELL TYPE
// we'll keep both columns for the object's type
type += col.GetNextToken();
}
else if (type == wxT("OPERATOR"))
{
// type for an operator class is OPERATOR CLASS
// we'll keep the two columns for the object's type
wxString tmp = str.Mid(str.Find(type)+type.Length()+1, 5);
if (tmp == wxT("CLASS"))
type += wxT(" ") + col.GetNextToken();
}
else if (type == wxT("SEQUENCE"))
{
// type for a sequence can be SEQUENCE, SEQUENCE OWNED BY or SEQUENCE SET
// we'll keep all these columns for the object's type
wxString tmp = str.Mid(str.Find(type)+type.Length()+1, 3);
if (tmp == wxT("OWN") || tmp == wxT("SET"))
{
type += wxT(" ") + col.GetNextToken();
if (type == wxT("SEQUENCE OWNED"))
type += wxT(" ") + col.GetNextToken();
}
}
else if (type == wxT("FK"))
{
// type for a FK is FK CONSTRAINT
// we'll keep the next column for the object's type
type = col.GetNextToken();
}
else if (type == wxT("TABLE"))
{
if (col.CountTokens() == 4)
{
// TABLE DATA detected
type += wxT(" ") + col.GetNextToken();
}
}
// Column 5 (namespace)
// Second interesting information: object's schema
wxString schema=col.GetNextToken();
// Column 6 (tag)
// Third interesting information: object's qualified name
//wxString name=col.GetNextToken();
wxString name = str.Mid(str.Find(schema)+schema.Length()+1).BeforeLast(' ');
// Column 7 (owner)
// Fourth interesting information: object's owner
wxString owner = str.Mid(str.Find(name)+name.Length()+1);
// New method
if (type == wxT("LANGUAGE"))
{
lastItem = ctvObjects->AppendItem(root, wxT("Language ")+name+wxT(" [") + _("owner") + wxT(": ")+owner+wxT("]"), 1);
}
else if (type == wxT("ACL") && schema == wxT("-"))
{
lastItem = ctvObjects->AppendItem(root, type+wxT(" ")+name, 1);
}
else if (type == wxT("CAST"))
{
lastItem = ctvObjects->AppendItem(root, name, 1);
}
else if (type == wxT("SCHEMA"))
{
currentSchema = name;
lastItem = currentSchemaNode = ctvObjects->AppendItem(root, wxT("Schema ")+name, 1);
}
else
{
if (schema != currentSchema)
{
// Loop through the nodes to find the schema
schemaNode = ctvObjects->GetFirstChild(root, schemaNodeData);
bool found = false;
while (schemaNode.IsOk() && !found)
{
if (ctvObjects->GetItemText(schemaNode) == wxT("Schema ")+schema)
found=true;
else
schemaNode = ctvObjects->GetNextChild(root, schemaNodeData);
}
// Found it?
if (schemaNode.IsOk())
{
currentSchema = schema;
currentSchemaNode = schemaNode;
}
// if we are treating a comment, we use the schema of its
// object (ie, the previous line)
else if (type != wxT("COMMENT"))
wxLogError(_("Schema node not found for object ") + type+wxT(" ")+name+wxT(" [")+_("owner")+wxT(": ")+owner+wxT("]"));
}
lastItem = ctvObjects->AppendItem(currentSchemaNode, type+wxT(" ")+name+wxT(" [")+_("owner")+wxT(": ")+owner+wxT("]"), 1);
}
ctvObjects->SetItemData(lastItem, new restoreTreeItemData(numberOfTOCItems,str));
numberOfTOCItems++;
}
wxEndBusyCursor();
nbNotebook->SetSelection(3);
}
else
{
wxRemoveFile(restoreTOCFilename);
}
}
int bmx_wxprocessevent_getexitcode(wxProcessEvent & event) {
return event.GetExitCode();
}
int bmx_wxprocessevent_getpid(wxProcessEvent & event) {
return event.GetPid();
}
void mxOutputView::OnProcessTerminate(wxProcessEvent &evt) {
OnProcessTerminateCommon(evt.GetExitCode());
delete process;
process=nullptr;
}