void ConnectedVNInfoEqClasses::Distribute(LiveInterval *LIV[],
MachineRegisterInfo &MRI) {
assert(LIV[0] && "LIV[0] must be set");
LiveInterval &LI = *LIV[0];
// Rewrite instructions.
for (MachineRegisterInfo::reg_iterator RI = MRI.reg_begin(LI.reg),
RE = MRI.reg_end(); RI != RE;) {
MachineOperand &MO = RI.getOperand();
MachineInstr *MI = MO.getParent();
++RI;
// DBG_VALUE instructions don't have slot indexes, so get the index of the
// instruction before them.
// Normally, DBG_VALUE instructions are removed before this function is
// called, but it is not a requirement.
SlotIndex Idx;
if (MI->isDebugValue())
Idx = LIS.getSlotIndexes()->getIndexBefore(MI);
else
Idx = LIS.getInstructionIndex(MI);
LiveQueryResult LRQ = LI.Query(Idx);
const VNInfo *VNI = MO.readsReg() ? LRQ.valueIn() : LRQ.valueDefined();
// In the case of an <undef> use that isn't tied to any def, VNI will be
// NULL. If the use is tied to a def, VNI will be the defined value.
if (!VNI)
continue;
MO.setReg(LIV[getEqClass(VNI)]->reg);
}
// Move runs to new intervals.
LiveInterval::iterator J = LI.begin(), E = LI.end();
while (J != E && EqClass[J->valno->id] == 0)
++J;
for (LiveInterval::iterator I = J; I != E; ++I) {
if (unsigned eq = EqClass[I->valno->id]) {
assert((LIV[eq]->empty() || LIV[eq]->expiredAt(I->start)) &&
"New intervals should be empty");
LIV[eq]->segments.push_back(*I);
} else
*J++ = *I;
}
LI.segments.erase(J, E);
// Transfer VNInfos to their new owners and renumber them.
unsigned j = 0, e = LI.getNumValNums();
while (j != e && EqClass[j] == 0)
++j;
for (unsigned i = j; i != e; ++i) {
VNInfo *VNI = LI.getValNumInfo(i);
if (unsigned eq = EqClass[i]) {
VNI->id = LIV[eq]->getNumValNums();
LIV[eq]->valnos.push_back(VNI);
} else {
VNI->id = j;
LI.valnos[j++] = VNI;
}
}
LI.valnos.resize(j);
}
/// rewrite - after all the new live ranges have been created, rewrite
/// instructions using curli to use the new intervals.
void SplitEditor::rewrite() {
assert(!openli_ && "Previous LI not closed before rewrite");
const LiveInterval *curli = sa_.getCurLI();
for (MachineRegisterInfo::reg_iterator RI = mri_.reg_begin(curli->reg),
RE = mri_.reg_end(); RI != RE;) {
MachineOperand &MO = RI.getOperand();
MachineInstr *MI = MO.getParent();
++RI;
if (MI->isDebugValue()) {
DEBUG(dbgs() << "Zapping " << *MI);
// FIXME: We can do much better with debug values.
MO.setReg(0);
continue;
}
SlotIndex Idx = lis_.getInstructionIndex(MI);
Idx = MO.isUse() ? Idx.getUseIndex() : Idx.getDefIndex();
LiveInterval *LI = dupli_;
for (unsigned i = firstInterval, e = intervals_.size(); i != e; ++i) {
LiveInterval *testli = intervals_[i];
if (testli->liveAt(Idx)) {
LI = testli;
break;
}
}
if (LI) {
MO.setReg(LI->reg);
sa_.removeUse(MI);
DEBUG(dbgs() << " rewrite " << Idx << '\t' << *MI);
}
}
// dupli_ goes in last, after rewriting.
if (dupli_) {
if (dupli_->empty()) {
DEBUG(dbgs() << " dupli became empty?\n");
lis_.removeInterval(dupli_->reg);
dupli_ = 0;
} else {
dupli_->RenumberValues(lis_);
intervals_.push_back(dupli_);
}
}
// Calculate spill weight and allocation hints for new intervals.
VirtRegAuxInfo vrai(vrm_.getMachineFunction(), lis_, sa_.loops_);
for (unsigned i = firstInterval, e = intervals_.size(); i != e; ++i) {
LiveInterval &li = *intervals_[i];
vrai.CalculateRegClass(li.reg);
vrai.CalculateWeightAndHint(li);
DEBUG(dbgs() << " new interval " << mri_.getRegClass(li.reg)->getName()
<< ":" << li << '\n');
}
}
void ConnectedVNInfoEqClasses::Distribute(LiveInterval *LIV[],
MachineRegisterInfo &MRI) {
assert(LIV[0] && "LIV[0] must be set");
LiveInterval &LI = *LIV[0];
// Rewrite instructions.
for (MachineRegisterInfo::reg_iterator RI = MRI.reg_begin(LI.reg),
RE = MRI.reg_end(); RI != RE;) {
MachineOperand &MO = RI.getOperand();
MachineInstr *MI = MO.getParent();
++RI;
if (MO.isUse() && MO.isUndef())
continue;
// DBG_VALUE instructions should have been eliminated earlier.
SlotIndex Idx = LIS.getInstructionIndex(MI);
Idx = Idx.getRegSlot(MO.isUse());
const VNInfo *VNI = LI.getVNInfoAt(Idx);
assert(VNI && "Interval not live at use.");
MO.setReg(LIV[getEqClass(VNI)]->reg);
}
// Move runs to new intervals.
LiveInterval::iterator J = LI.begin(), E = LI.end();
while (J != E && EqClass[J->valno->id] == 0)
++J;
for (LiveInterval::iterator I = J; I != E; ++I) {
if (unsigned eq = EqClass[I->valno->id]) {
assert((LIV[eq]->empty() || LIV[eq]->expiredAt(I->start)) &&
"New intervals should be empty");
LIV[eq]->ranges.push_back(*I);
} else
*J++ = *I;
}
LI.ranges.erase(J, E);
// Transfer VNInfos to their new owners and renumber them.
unsigned j = 0, e = LI.getNumValNums();
while (j != e && EqClass[j] == 0)
++j;
for (unsigned i = j; i != e; ++i) {
VNInfo *VNI = LI.getValNumInfo(i);
if (unsigned eq = EqClass[i]) {
VNI->id = LIV[eq]->getNumValNums();
LIV[eq]->valnos.push_back(VNI);
} else {
VNI->id = j;
LI.valnos[j++] = VNI;
}
}
LI.valnos.resize(j);
}
void ConnectedVNInfoEqClasses::Distribute(LiveInterval *LIV[],
MachineRegisterInfo &MRI) {
assert(LIV[0] && "LIV[0] must be set");
LiveInterval &LI = *LIV[0];
// Rewrite instructions.
for (MachineRegisterInfo::reg_iterator RI = MRI.reg_begin(LI.reg),
RE = MRI.reg_end(); RI != RE;) {
MachineOperand &MO = RI.getOperand();
MachineInstr *MI = MO.getParent();
++RI;
// DBG_VALUE instructions should have been eliminated earlier.
LiveRangeQuery LRQ(LI, LIS.getInstructionIndex(MI));
const VNInfo *VNI = MO.readsReg() ? LRQ.valueIn() : LRQ.valueDefined();
// In the case of an <undef> use that isn't tied to any def, VNI will be
// NULL. If the use is tied to a def, VNI will be the defined value.
if (!VNI)
continue;
MO.setReg(LIV[getEqClass(VNI)]->reg);
}
// Move runs to new intervals.
LiveInterval::iterator J = LI.begin(), E = LI.end();
while (J != E && EqClass[J->valno->id] == 0)
++J;
for (LiveInterval::iterator I = J; I != E; ++I) {
if (unsigned eq = EqClass[I->valno->id]) {
assert((LIV[eq]->empty() || LIV[eq]->expiredAt(I->start)) &&
"New intervals should be empty");
LIV[eq]->ranges.push_back(*I);
} else
*J++ = *I;
}
LI.ranges.erase(J, E);
// Transfer VNInfos to their new owners and renumber them.
unsigned j = 0, e = LI.getNumValNums();
while (j != e && EqClass[j] == 0)
++j;
for (unsigned i = j; i != e; ++i) {
VNInfo *VNI = LI.getValNumInfo(i);
if (unsigned eq = EqClass[i]) {
VNI->id = LIV[eq]->getNumValNums();
LIV[eq]->valnos.push_back(VNI);
} else {
VNI->id = j;
LI.valnos[j++] = VNI;
}
}
LI.valnos.resize(j);
}
/// rewriteAssigned - Rewrite all uses of Edit->getReg().
void SplitEditor::rewriteAssigned(bool ExtendRanges) {
for (MachineRegisterInfo::reg_iterator RI = MRI.reg_begin(Edit->getReg()),
RE = MRI.reg_end(); RI != RE;) {
MachineOperand &MO = RI.getOperand();
MachineInstr *MI = MO.getParent();
++RI;
// LiveDebugVariables should have handled all DBG_VALUE instructions.
if (MI->isDebugValue()) {
DEBUG(dbgs() << "Zapping " << *MI);
MO.setReg(0);
continue;
}
// <undef> operands don't really read the register, so it doesn't matter
// which register we choose. When the use operand is tied to a def, we must
// use the same register as the def, so just do that always.
SlotIndex Idx = LIS.getInstructionIndex(MI);
if (MO.isDef() || MO.isUndef())
Idx = MO.isEarlyClobber() ? Idx.getUseIndex() : Idx.getDefIndex();
// Rewrite to the mapped register at Idx.
unsigned RegIdx = RegAssign.lookup(Idx);
LiveInterval *LI = Edit->get(RegIdx);
MO.setReg(LI->reg);
DEBUG(dbgs() << " rewr BB#" << MI->getParent()->getNumber() << '\t'
<< Idx << ':' << RegIdx << '\t' << *MI);
// Extend liveness to Idx if the instruction reads reg.
if (!ExtendRanges || MO.isUndef())
continue;
// Skip instructions that don't read Reg.
if (MO.isDef()) {
if (!MO.getSubReg() && !MO.isEarlyClobber())
continue;
// We may wan't to extend a live range for a partial redef, or for a use
// tied to an early clobber.
Idx = Idx.getPrevSlot();
if (!Edit->getParent().liveAt(Idx))
continue;
} else
Idx = Idx.getUseIndex();
getLRCalc(RegIdx).extend(LI, Idx.getNextSlot(), LIS.getSlotIndexes(),
&MDT, &LIS.getVNInfoAllocator());
}
}
/// NoUseAfterLastDef - Return true if there are no intervening uses between the
/// last instruction in the MBB that defines the specified register and the
/// two-address instruction which is being processed. It also returns the last
/// def location by reference
bool TwoAddressInstructionPass::NoUseAfterLastDef(unsigned Reg,
MachineBasicBlock *MBB, unsigned Dist,
unsigned &LastDef) {
LastDef = 0;
unsigned LastUse = Dist;
for (MachineRegisterInfo::reg_iterator I = MRI->reg_begin(Reg),
E = MRI->reg_end(); I != E; ++I) {
MachineOperand &MO = I.getOperand();
MachineInstr *MI = MO.getParent();
if (MI->getParent() != MBB)
continue;
DenseMap<MachineInstr*, unsigned>::iterator DI = DistanceMap.find(MI);
if (DI == DistanceMap.end())
continue;
if (MO.isUse() && DI->second < LastUse)
LastUse = DI->second;
if (MO.isDef() && DI->second > LastDef)
LastDef = DI->second;
}
return !(LastUse > LastDef && LastUse < Dist);
}
MachineInstr *TwoAddressInstructionPass::FindLastUseInMBB(unsigned Reg,
MachineBasicBlock *MBB,
unsigned Dist) {
unsigned LastUseDist = 0;
MachineInstr *LastUse = 0;
for (MachineRegisterInfo::reg_iterator I = MRI->reg_begin(Reg),
E = MRI->reg_end(); I != E; ++I) {
MachineOperand &MO = I.getOperand();
MachineInstr *MI = MO.getParent();
if (MI->getParent() != MBB)
continue;
DenseMap<MachineInstr*, unsigned>::iterator DI = DistanceMap.find(MI);
if (DI == DistanceMap.end())
continue;
if (DI->second >= Dist)
continue;
if (MO.isUse() && DI->second > LastUseDist) {
LastUse = DI->first;
LastUseDist = DI->second;
}
}
return LastUse;
}
/// ComputeLocalLiveness - Computes liveness of registers within a basic
/// block, setting the killed/dead flags as appropriate.
void RALocal::ComputeLocalLiveness(MachineBasicBlock& MBB) {
MachineRegisterInfo &MRI = MBB.getParent()->getRegInfo();
// Keep track of the most recently seen previous use or def of each reg,
// so that we can update them with dead/kill markers.
DenseMap<unsigned, std::pair<MachineInstr*, unsigned> > LastUseDef;
for (MachineBasicBlock::iterator I = MBB.begin(), E = MBB.end();
I != E; ++I) {
if (I->isDebugValue())
continue;
for (unsigned i = 0, e = I->getNumOperands(); i != e; ++i) {
MachineOperand &MO = I->getOperand(i);
// Uses don't trigger any flags, but we need to save
// them for later. Also, we have to process these
// _before_ processing the defs, since an instr
// uses regs before it defs them.
if (!MO.isReg() || !MO.getReg() || !MO.isUse())
continue;
LastUseDef[MO.getReg()] = std::make_pair(I, i);
if (TargetRegisterInfo::isVirtualRegister(MO.getReg())) continue;
const unsigned *Aliases = TRI->getAliasSet(MO.getReg());
if (Aliases == 0)
continue;
while (*Aliases) {
DenseMap<unsigned, std::pair<MachineInstr*, unsigned> >::iterator
alias = LastUseDef.find(*Aliases);
if (alias != LastUseDef.end() && alias->second.first != I)
LastUseDef[*Aliases] = std::make_pair(I, i);
++Aliases;
}
}
for (unsigned i = 0, e = I->getNumOperands(); i != e; ++i) {
MachineOperand &MO = I->getOperand(i);
// Defs others than 2-addr redefs _do_ trigger flag changes:
// - A def followed by a def is dead
// - A use followed by a def is a kill
if (!MO.isReg() || !MO.getReg() || !MO.isDef()) continue;
DenseMap<unsigned, std::pair<MachineInstr*, unsigned> >::iterator
last = LastUseDef.find(MO.getReg());
if (last != LastUseDef.end()) {
// Check if this is a two address instruction. If so, then
// the def does not kill the use.
if (last->second.first == I &&
I->isRegTiedToUseOperand(i))
continue;
MachineOperand &lastUD =
last->second.first->getOperand(last->second.second);
if (lastUD.isDef())
lastUD.setIsDead(true);
else
lastUD.setIsKill(true);
}
LastUseDef[MO.getReg()] = std::make_pair(I, i);
}
}
// Live-out (of the function) registers contain return values of the function,
// so we need to make sure they are alive at return time.
MachineBasicBlock::iterator Ret = MBB.getFirstTerminator();
bool BBEndsInReturn = (Ret != MBB.end() && Ret->getDesc().isReturn());
if (BBEndsInReturn)
for (MachineRegisterInfo::liveout_iterator
I = MF->getRegInfo().liveout_begin(),
E = MF->getRegInfo().liveout_end(); I != E; ++I)
if (!Ret->readsRegister(*I)) {
Ret->addOperand(MachineOperand::CreateReg(*I, false, true));
LastUseDef[*I] = std::make_pair(Ret, Ret->getNumOperands()-1);
}
// Finally, loop over the final use/def of each reg
// in the block and determine if it is dead.
for (DenseMap<unsigned, std::pair<MachineInstr*, unsigned> >::iterator
I = LastUseDef.begin(), E = LastUseDef.end(); I != E; ++I) {
MachineInstr *MI = I->second.first;
unsigned idx = I->second.second;
MachineOperand &MO = MI->getOperand(idx);
bool isPhysReg = TargetRegisterInfo::isPhysicalRegister(MO.getReg());
// A crude approximation of "live-out" calculation
bool usedOutsideBlock = isPhysReg ? false :
UsedInMultipleBlocks.test(MO.getReg() -
TargetRegisterInfo::FirstVirtualRegister);
// If the machine BB ends in a return instruction, then the value isn't used
// outside of the BB.
if (!isPhysReg && (!usedOutsideBlock || BBEndsInReturn)) {
// DBG_VALUE complicates this: if the only refs of a register outside
// this block are DBG_VALUE, we can't keep the reg live just for that,
// as it will cause the reg to be spilled at the end of this block when
// it wouldn't have been otherwise. Nullify the DBG_VALUEs when that
// happens.
bool UsedByDebugValueOnly = false;
for (MachineRegisterInfo::reg_iterator UI = MRI.reg_begin(MO.getReg()),
UE = MRI.reg_end(); UI != UE; ++UI) {
// Two cases:
// - used in another block
// - used in the same block before it is defined (loop)
if (UI->getParent() == &MBB &&
!(MO.isDef() && UI.getOperand().isUse() && precedes(&*UI, MI)))
continue;
if (UI->isDebugValue()) {
UsedByDebugValueOnly = true;
continue;
}
// A non-DBG_VALUE use means we can leave DBG_VALUE uses alone.
UsedInMultipleBlocks.set(MO.getReg() -
TargetRegisterInfo::FirstVirtualRegister);
usedOutsideBlock = true;
UsedByDebugValueOnly = false;
break;
}
if (UsedByDebugValueOnly)
for (MachineRegisterInfo::reg_iterator UI = MRI.reg_begin(MO.getReg()),
UE = MRI.reg_end(); UI != UE; ++UI)
if (UI->isDebugValue() &&
(UI->getParent() != &MBB ||
(MO.isDef() && precedes(&*UI, MI))))
UI.getOperand().setReg(0U);
}
// Physical registers and those that are not live-out of the block are
// killed/dead at their last use/def within this block.
if (isPhysReg || !usedOutsideBlock || BBEndsInReturn) {
if (MO.isUse()) {
// Don't mark uses that are tied to defs as kills.
if (!MI->isRegTiedToDefOperand(idx))
MO.setIsKill(true);
} else {
MO.setIsDead(true);
}
}
}
}
/// hasRegisterUseBelow - Return true if the specified register is used after
/// the current instruction and before it's next definition.
bool LiveVariables::hasRegisterUseBelow(unsigned Reg,
MachineBasicBlock::iterator I,
MachineBasicBlock *MBB) {
if (I == MBB->end())
return false;
// First find out if there are any uses / defs below.
bool hasDistInfo = true;
unsigned CurDist = DistanceMap[I];
SmallVector<MachineInstr*, 4> Uses;
SmallVector<MachineInstr*, 4> Defs;
for (MachineRegisterInfo::reg_iterator RI = MRI->reg_begin(Reg),
RE = MRI->reg_end(); RI != RE; ++RI) {
MachineOperand &UDO = RI.getOperand();
MachineInstr *UDMI = &*RI;
if (UDMI->getParent() != MBB)
continue;
DenseMap<MachineInstr*, unsigned>::iterator DI = DistanceMap.find(UDMI);
bool isBelow = false;
if (DI == DistanceMap.end()) {
// Must be below if it hasn't been assigned a distance yet.
isBelow = true;
hasDistInfo = false;
} else if (DI->second > CurDist)
isBelow = true;
if (isBelow) {
if (UDO.isUse())
Uses.push_back(UDMI);
if (UDO.isDef())
Defs.push_back(UDMI);
}
}
if (Uses.empty())
// No uses below.
return false;
else if (!Uses.empty() && Defs.empty())
// There are uses below but no defs below.
return true;
// There are both uses and defs below. We need to know which comes first.
if (!hasDistInfo) {
// Complete DistanceMap for this MBB. This information is computed only
// once per MBB.
++I;
++CurDist;
for (MachineBasicBlock::iterator E = MBB->end(); I != E; ++I, ++CurDist)
DistanceMap.insert(std::make_pair(I, CurDist));
}
unsigned EarliestUse = DistanceMap[Uses[0]];
for (unsigned i = 1, e = Uses.size(); i != e; ++i) {
unsigned Dist = DistanceMap[Uses[i]];
if (Dist < EarliestUse)
EarliestUse = Dist;
}
for (unsigned i = 0, e = Defs.size(); i != e; ++i) {
unsigned Dist = DistanceMap[Defs[i]];
if (Dist < EarliestUse)
// The register is defined before its first use below.
return false;
}
return true;
}
/// getTripCount - Return a loop-invariant LLVM value indicating the
/// number of times the loop will be executed. The trip count can
/// be either a register or a constant value. If the trip-count
/// cannot be determined, this returns null.
///
/// We find the trip count from the phi instruction that defines the
/// induction variable. We follow the links to the CMP instruction
/// to get the trip count.
///
/// Based upon getTripCount in LoopInfo.
///
CountValue *PPCCTRLoops::getTripCount(MachineLoop *L,
SmallVector<MachineInstr *, 2> &OldInsts) const {
MachineBasicBlock *LastMBB = L->getExitingBlock();
// Don't generate a CTR loop if the loop has more than one exit.
if (LastMBB == 0)
return 0;
MachineBasicBlock::iterator LastI = LastMBB->getFirstTerminator();
if (LastI->getOpcode() != PPC::BCC)
return 0;
// We need to make sure that this compare is defining the condition
// register actually used by the terminating branch.
unsigned PredReg = LastI->getOperand(1).getReg();
DEBUG(dbgs() << "Examining loop with first terminator: " << *LastI);
unsigned PredCond = LastI->getOperand(0).getImm();
if (PredCond != PPC::PRED_EQ && PredCond != PPC::PRED_NE)
return 0;
// Check that the loop has a induction variable.
SmallVector<MachineInstr *, 4> IVars, IOps;
getCanonicalInductionVariable(L, IVars, IOps);
for (unsigned i = 0; i < IVars.size(); ++i) {
MachineInstr *IOp = IOps[i];
MachineInstr *IV_Inst = IVars[i];
// Canonical loops will end with a 'cmpwi/cmpdi cr, IV, Imm',
// if Imm is 0, get the count from the PHI opnd
// if Imm is -M, than M is the count
// Otherwise, Imm is the count
MachineOperand *IV_Opnd;
const MachineOperand *InitialValue;
if (!L->contains(IV_Inst->getOperand(2).getMBB())) {
InitialValue = &IV_Inst->getOperand(1);
IV_Opnd = &IV_Inst->getOperand(3);
} else {
InitialValue = &IV_Inst->getOperand(3);
IV_Opnd = &IV_Inst->getOperand(1);
}
DEBUG(dbgs() << "Considering:\n");
DEBUG(dbgs() << " induction operation: " << *IOp);
DEBUG(dbgs() << " induction variable: " << *IV_Inst);
DEBUG(dbgs() << " initial value: " << *InitialValue << "\n");
// Look for the cmp instruction to determine if we
// can get a useful trip count. The trip count can
// be either a register or an immediate. The location
// of the value depends upon the type (reg or imm).
for (MachineRegisterInfo::reg_iterator
RI = MRI->reg_begin(IV_Opnd->getReg()), RE = MRI->reg_end();
RI != RE; ++RI) {
IV_Opnd = &RI.getOperand();
bool SignedCmp, Int64Cmp;
MachineInstr *MI = IV_Opnd->getParent();
if (L->contains(MI) && isCompareEqualsImm(MI, SignedCmp, Int64Cmp) &&
MI->getOperand(0).getReg() == PredReg) {
OldInsts.push_back(MI);
OldInsts.push_back(IOp);
DEBUG(dbgs() << " compare: " << *MI);
const MachineOperand &MO = MI->getOperand(2);
assert(MO.isImm() && "IV Cmp Operand should be an immediate");
int64_t ImmVal;
if (SignedCmp)
ImmVal = (short) MO.getImm();
else
ImmVal = MO.getImm();
const MachineInstr *IV_DefInstr = MRI->getVRegDef(IV_Opnd->getReg());
assert(L->contains(IV_DefInstr->getParent()) &&
"IV definition should occurs in loop");
int64_t iv_value = (short) IV_DefInstr->getOperand(2).getImm();
assert(InitialValue->isReg() && "Expecting register for init value");
unsigned InitialValueReg = InitialValue->getReg();
MachineInstr *DefInstr = MRI->getVRegDef(InitialValueReg);
// Here we need to look for an immediate load (an li or lis/ori pair).
if (DefInstr && (DefInstr->getOpcode() == PPC::ORI8 ||
DefInstr->getOpcode() == PPC::ORI)) {
int64_t start = DefInstr->getOperand(2).getImm();
MachineInstr *DefInstr2 =
MRI->getVRegDef(DefInstr->getOperand(1).getReg());
if (DefInstr2 && (DefInstr2->getOpcode() == PPC::LIS8 ||
DefInstr2->getOpcode() == PPC::LIS)) {
DEBUG(dbgs() << " initial constant: " << *DefInstr);
DEBUG(dbgs() << " initial constant: " << *DefInstr2);
start |= int64_t(short(DefInstr2->getOperand(1).getImm())) << 16;
int64_t count = ImmVal - start;
if ((count % iv_value) != 0) {
return 0;
}
OldInsts.push_back(DefInstr);
OldInsts.push_back(DefInstr2);
// count/iv_value, the trip count, should be positive here. If it
// is negative, that indicates that the counter will wrap.
if (Int64Cmp)
return new CountValue(count/iv_value);
else
return new CountValue(uint32_t(count/iv_value));
}
} else if (DefInstr && (DefInstr->getOpcode() == PPC::LI8 ||
DefInstr->getOpcode() == PPC::LI)) {
DEBUG(dbgs() << " initial constant: " << *DefInstr);
int64_t count = ImmVal -
int64_t(short(DefInstr->getOperand(1).getImm()));
if ((count % iv_value) != 0) {
return 0;
}
OldInsts.push_back(DefInstr);
if (Int64Cmp)
return new CountValue(count/iv_value);
else
return new CountValue(uint32_t(count/iv_value));
} else if (iv_value == 1 || iv_value == -1) {
// We can't determine a constant starting value.
if (ImmVal == 0) {
return new CountValue(InitialValueReg, iv_value > 0);
}
// FIXME: handle non-zero end value.
}
// FIXME: handle non-unit increments (we might not want to introduce
// division but we can handle some 2^n cases with shifts).
}
}
}
return 0;
}