int
main(int argc, char *argv[]) {
ROSE_INITIALIZE;
Diagnostics::initAndRegister(&::mlog, "tool");
Settings settings;
P2::Engine engine;
engine.doingPostAnalysis(false); // not needed by this tool
std::vector<std::string> specimens = parseCommandLine(argc, argv, engine, settings);
P2::Partitioner partitioner = engine.partition(specimens);
if (settings.traceInsns || settings.traceSemantics)
::mlog[TRACE].enable();
// Find the string decoder.
if (!partitioner.functionExists(settings.decoderVa)) {
::mlog[FATAL] <<"cannot find decoder function at " <<StringUtility::addrToString(settings.decoderVa) <<"\n";
exit(1);
}
if (settings.synthesized) {
processSynthesizedCalls(partitioner, settings);
} else {
processExistingCalls(partitioner, settings);
}
}
static std::vector<SgAsmFunction*>
loadFunctions(const std::vector<std::string> &specimen, P2::Engine &engine) {
engine.reset(); // clear all but config properties
engine.doingPostAnalysis(false); // not needed for this tool
SgAsmBlock *gblock = engine.buildAst(specimen); // parse, load, link, disassemble, partition, build AST
return SageInterface::querySubTree<SgAsmFunction>(gblock); // return just the functions
}
int
main(int argc, char *argv[]) {
ROSE_INITIALIZE;
Diagnostics::initAndRegister(&mlog, "tool");
// Parse the command-line to configure the partitioner engine, obtain the executable and its arguments, and generate a man
// page, adjust global settings, etc. This demo tool has no switches of its own, which makes this even easier. For a
// production tool, it's probably better to obtain the parser and register only those switches we need (e.g., no need for
// AST generation switches since we skip that step), to set it up to use our own diagnostic stream instead of exceptions,
// and to adjust this tool's synopsis in the documentation. Examples of all of these can be found in other demos.
P2::Engine engine;
engine.doingPostAnalysis(false); // no need for any post-analysis phases (user can override on cmdline)
std::vector<std::string> command;
try {
command = engine.parseCommandLine(argc, argv, purpose, description).unreachedArgs();
} catch (const std::runtime_error &e) {
mlog[FATAL] <<"invalid command-line: " <<e.what() <<"\n";
exit(1);
}
if (command.empty()) {
mlog[FATAL] <<"no executable specified\n";
exit(1);
}
// Since we'll be tracing this program's execution, we might as well disassemble the process's memory directly. That way we
// don't have to worry about ROSE mapping the specimen to the same virtual address as the kernel (which might be using
// address randomization). We can stop short of generating the AST because we won't need it.
BinaryAnalysis::BinaryDebugger debugger(command);
std::string specimenResourceName = "proc:noattach:" + StringUtility::numberToString(debugger.isAttached());
P2::Partitioner partitioner = engine.partition(specimenResourceName);
partitioner.memoryMap()->dump(std::cerr); // show the memory map as a debugging aid
// Create a global control flow graph whose vertices are instructions from a global CFG whose verts are mostly basic
// blocks.
InsnCfg insnCfg;
const P2::ControlFlowGraph &bbCfg = partitioner.cfg();
BOOST_FOREACH (const P2::ControlFlowGraph::Vertex &bbVert, bbCfg.vertices()) {
if (P2::BasicBlock::Ptr bb = isBasicBlock(bbVert)) {
const std::vector<SgAsmInstruction*> &insns = bb->instructions();
// Each basic block has one or more instructions that need to be inserted into our instruction control flow graph
// with edges from each instruction to the next. The insertEdgeWithVertices automatically inserts missing
// vertices, and doesn't insert vertices that already exist, making it convenient for this type of construction.
for (size_t i=1; i<insns.size(); ++i)
insnCfg.insertEdgeWithVertices(insns[i-1], insns[i]);
// The final instruction of this block needs to flow into each of the initial instructions of the successor basic
// blocks. Be careful that the successors are actually existing basic blocks. Note that in ROSE's global CFG, a
// function call has at least two successors: the function being called (normal edges), and the address to which
// the function returns ("callret" edges). There are other types of edges too, but we want only the normal edges.
BOOST_FOREACH (const P2::ControlFlowGraph::Edge &bbEdge, bbVert.outEdges()) {
if (bbEdge.value().type() == P2::E_NORMAL) {
if (P2::BasicBlock::Ptr target = isBasicBlock(*bbEdge.target()))
insnCfg.insertEdgeWithVertices(insns.back(), target->instructions()[0]);
}
}
}
}
mlog[INFO] <<"block CFG: "
<<StringUtility::plural(bbCfg.nVertices(), "vertices", "vertex") <<", "
<<StringUtility::plural(bbCfg.nEdges(), "edges") <<"\n";
mlog[INFO] <<"insn CFG: "
<<StringUtility::plural(insnCfg.nVertices(), "vertices", "vertex") <<", "
<<StringUtility::plural(insnCfg.nEdges(), "edges") <<"\n";
// Run the executable to obtain a trace. We use the instruction pointer to look up a SgAsmInstruction in the insnCfg and
// thus map the trace onto the instruction CFG.
mlog[INFO] <<"running subordinate to obtain trace: " <<boost::join(command, " ") <<"\n";
std::set<rose_addr_t> missingAddresses;
Trace trace;
while (!debugger.isTerminated()) {
// Find the instruction CFG vertex corresponding to the current execution address. It could be that the execution
// address doesn't exist in the CFG, and this can be caused by a number of things including failure of ROSE to
// statically find the address, dynamic libraries that weren't loaded statically, etc.
rose_addr_t va = debugger.executionAddress();
InsnCfg::ConstVertexIterator vertex = insnCfg.findVertexKey(va);
if (!insnCfg.isValidVertex(vertex)) {
missingAddresses.insert(va);
} else {
trace.append(vertex->id());
}
debugger.singleStep();
}
mlog[INFO] <<"subordinate " <<debugger.howTerminated() <<"\n";
mlog[INFO] <<"trace length: " <<StringUtility::plural(trace.size(), "instructions") <<"\n";
Diagnostics::mfprintf(mlog[INFO])("overall burstiness: %6.2f%%\n", 100.0 * trace.burstiness());
mlog[INFO] <<"distinct executed addresses missing from CFG: " <<missingAddresses.size() <<"\n";
// Print a list of CFG vertices that were never reached. We use std::cout rather than diagnostics because this is one of
// the main outputs of this demo. The "if" condition is constant time.
BOOST_FOREACH (const InsnCfg::Vertex &vertex, insnCfg.vertices()) {
if (!trace.exists(vertex.id()))
std::cout <<"not executed: " <<unparseInstructionWithAddress(vertex.value()) <<"\n";
}
// Print list of addresses that were executed but did not appear in the CFG
BOOST_FOREACH (rose_addr_t va, missingAddresses)
std::cout <<"missing address: " <<StringUtility::addrToString(va) <<"\n";
// Print those branch instructions that were executed by the trace but always took the same branch. Just to mix things up,
// I'll iterate over the trace labels this time instead of the CFG vertices. Remember, the labels are the integer IDs of
// the CFG vertices. The "if" condition executes in constant time, as does the next line.
for (size_t i = 0; i < trace.nLabels(); ++i) {
if (insnCfg.findVertex(i)->nOutEdges() > 1 && trace.successors(i).size() == 1) {
SgAsmInstruction *successor = insnCfg.findVertex(*trace.successorSet(i).begin())->value();
std::cout <<"single flow: " <<unparseInstructionWithAddress(insnCfg.findVertex(i)->value())
<<" --> " <<unparseInstructionWithAddress(successor) <<"\n";
}
}
// Get a list of executed instructions that are branch points and sort them by their burstiness. The "if" condition is
// constant time.
std::vector<InsnTraceInfo> info;
BOOST_FOREACH (const InsnCfg::Vertex &vertex, insnCfg.vertices()) {
if (vertex.nOutEdges() > 1 && trace.exists(vertex.id()))
info.push_back(InsnTraceInfo(vertex.value(), trace.burstiness(vertex.id()), trace.size(vertex.id())));
}
std::sort(info.begin(), info.end());
std::reverse(info.begin(), info.end());
BOOST_FOREACH (const InsnTraceInfo &record, info) {
Diagnostics::mfprintf(std::cout)("burstiness %6.2f%% %5zu hits at %s\n",
100.0*record.burstiness, record.nHits,
unparseInstructionWithAddress(record.insn).c_str());
}