void wxSFAutoLayout::Layout(wxSFDiagramManager& manager, const wxString& algname)
{
wxSFLayoutAlgorithm *pAlg = m_mapAlgorithms[ algname ];
if( pAlg )
{
ShapeList lstShapes;
manager.GetShapes( CLASSINFO(wxSFShapeBase), lstShapes );
// remove all child shapes
ShapeList::compatibility_iterator it = lstShapes.GetFirst();
while( it )
{
wxSFShapeBase *pShape = it->GetData();
if( pShape->GetParentShape() || pShape->IsKindOf(CLASSINFO(wxSFLineShape)) )
{
lstShapes.DeleteNode( it );
it = lstShapes.GetFirst();
}
else
it = it->GetNext();
}
pAlg->DoLayout( lstShapes );
manager.MoveShapesFromNegatives();
if( manager.GetShapeCanvas() ) UpdateCanvas( manager.GetShapeCanvas() );
}
}
void udStateChartOptimizer::FindTransWithIdenticalActions(ShapeList& transitions, ShapeList& sublist)
{
sublist.Clear();
ShapeList::compatibility_iterator node = transitions.GetFirst();
if( !node ) return;
udTransElementItem *pTransElement;
wxSFLineShape *pTrans = (wxSFLineShape*)node->GetData();
wxString sActions, sTemplate = ((udTransElementItem*)pTrans->GetUserData())->GetActionsString();
sTemplate.Replace(wxT(" "), wxT(""));
while(node)
{
pTrans = (wxSFLineShape*)node->GetData();
pTransElement = (udTransElementItem*)pTrans->GetUserData();
sActions = pTransElement->GetActionsString();
sActions.Replace(wxT(" "), wxT(""));
if( sActions == sTemplate )
{
node = node->GetNext();
transitions.DeleteObject(pTrans);
sublist.Append(pTrans);
}
else
node = node->GetNext();
}
}
void wxSFShapeBase::ScaleChildren(double x, double y)
{
ShapeList m_lstChildren;
GetChildShapes(sfANY, m_lstChildren, sfRECURSIVE);
ShapeList::compatibility_iterator node = m_lstChildren.GetFirst();
while(node)
{
wxSFShapeBase* pShape = node->GetData();
if((pShape->GetStyle() & sfsSIZE_CHANGE) && !pShape->IsKindOf(CLASSINFO(wxSFTextShape)))
{
pShape->Scale(x, y, sfWITHOUTCHILDREN);
}
if( (pShape->GetStyle() & sfsPOSITION_CHANGE) && ((pShape->GetVAlign() == valignNONE) || (pShape->GetHAlign() == halignNONE)) )
{
pShape->SetRelativePosition(pShape->m_nRelativePosition.x*x, pShape->m_nRelativePosition.y*y);
}
// re-align shapes which have set any alignment mode
pShape->DoAlignment();
node = node->GetNext();
}
}
void wxSFMultiSelRect::OnTopHandle(wxSFShapeHandle& handle)
{
if(GetParentCanvas() && !AnyHeightExceeded(wxPoint(0, -handle.GetDelta().y)))
{
wxXS::RealPointList::compatibility_iterator ptnode;
wxSFLineShape* pLine;
wxRealPoint* pt;
double dy, sy = (GetRectSize().y - 2*sfDEFAULT_ME_OFFSET - handle.GetDelta().y)/(GetRectSize().y - 2*sfDEFAULT_ME_OFFSET);
ShapeList m_lstSelection;
GetParentCanvas()->GetSelectedShapes(m_lstSelection);
ShapeList::compatibility_iterator node = m_lstSelection.GetFirst();
while(node)
{
wxSFShapeBase* pShape = node->GetData();
if(!pShape->IsKindOf(CLASSINFO(wxSFLineShape)))
{
if(pShape->ContainsStyle(sfsPOSITION_CHANGE))
{
if(pShape->GetParentShape())
{
pShape->SetRelativePosition(pShape->GetRelativePosition().x, pShape->GetRelativePosition().y*sy);
}
else
{
double dy = handle.GetDelta().y - (pShape->GetAbsolutePosition().y - (GetAbsolutePosition().y + sfDEFAULT_ME_OFFSET))/(GetRectSize().y - 2*sfDEFAULT_ME_OFFSET)*handle.GetDelta().y;
pShape->MoveBy(0, dy);
}
}
if(pShape->ContainsStyle(sfsSIZE_CHANGE))pShape->Scale(1, sy, sfWITHCHILDREN);
if( ! pShape->ContainsStyle( sfsNO_FIT_TO_CHILDREN ) ) pShape->FitToChildren();
}
else
{
if(pShape->ContainsStyle(sfsPOSITION_CHANGE))
{
pLine = (wxSFLineShape*)pShape;
ptnode = pLine->GetControlPoints().GetFirst();
while(ptnode)
{
pt = ptnode->GetData();
dy = handle.GetDelta().y - (pt->y - (GetAbsolutePosition().y + sfDEFAULT_ME_OFFSET))/(GetRectSize().y - 2*sfDEFAULT_ME_OFFSET)*handle.GetDelta().y;
pt->y += dy;
pt->y = floor(pt->y);
ptnode = ptnode->GetNext();
}
}
}
node = node->GetNext();
}
}
}
void wxSFShapePasteEvent::SetPastedShapes(const ShapeList &list)
{
ShapeList::compatibility_iterator node = list.GetFirst();
while(node)
{
m_lstPastedShapes.Append(node->GetData());
node = node->GetNext();
}
}
void wxSFDiagramManager::RemoveShapes(const ShapeList& selection)
{
wxSFShapeBase* pShape;
ShapeList::compatibility_iterator node = selection.GetFirst();
while(node)
{
pShape = node->GetData();
// it is important to check whether double-linked shapes already exist before
// they are deleted
if(Contains(pShape))RemoveShape(pShape, false);
node = node->GetNext();
}
}
void udLoopCaseAlgorithm::ProcessState(wxSFShapeBase *state)
{
wxASSERT(state);
if(!state)return;
// check whether the state is already processed
if( m_lstProcessedElements.IndexOf(state) != wxNOT_FOUND )return;
wxSFDiagramManager *pDiagManager = state->GetShapeManager();
udLanguage *pLang = m_pParentGenerator->GetActiveLanguage();
pLang->SingleLineCommentCmd(wxT("State ID: ") + m_pParentGenerator->MakeIDName(state));
// find state neighbours
ShapeList lstNeighbours;
pDiagManager->GetNeighbours(state, lstNeighbours, CLASSINFO(umlTransitionItem), wxSFShapeBase::lineSTARTING, sfDIRECT);
// find next processable state
if( !lstNeighbours.IsEmpty() && ( m_lstProcessedElements.IndexOf(lstNeighbours.GetFirst()->GetData()) == wxNOT_FOUND ) )
{
m_pNextElement = lstNeighbours.GetFirst()->GetData();
}
else
m_pNextElement = NULL;
// process given element
udElementProcessor *pProcessor = GetElementProcessor(state->GetClassInfo()->GetClassName());
if(pProcessor)
{
pProcessor->ProcessElement(state);
}
else
{
pLang->SingleLineCommentCmd(wxString::Format(wxT( "!!! WARNING: UNSUPPORTED ELEMENT ('%s') !!!"), ((udProjectItem*)state->GetUserData())->GetName().c_str()));
IPluginManager::Get()->Log(wxString::Format(wxT("WARNING: '%s' element is not supported by this algorithm."), ((udProjectItem*)state->GetUserData())->GetName().c_str()));
}
// set the state as processes
m_lstProcessedElements.Append(state);
m_pPrevElement = state;
// process connected states
ShapeList::compatibility_iterator node = lstNeighbours.GetFirst();
while(node)
{
wxSFShapeBase *pNext = node->GetData();
ProcessState( pNext );
node = node->GetNext();
}
}
void wxSFMultiSelRect::OnRightHandle(wxSFShapeHandle& handle)
{
if(GetParentCanvas() && !AnyWidthExceeded(handle.GetDelta()))
{
wxXS::RealPointList::compatibility_iterator ptnode;
wxSFLineShape* pLine;
wxRealPoint* pt;
double dx, sx = (GetRectSize().x - 2*sfDEFAULT_ME_OFFSET + handle.GetDelta().x)/(GetRectSize().x - 2*sfDEFAULT_ME_OFFSET);
ShapeList m_lstSelection;
GetParentCanvas()->GetSelectedShapes(m_lstSelection);
ShapeList::compatibility_iterator node = m_lstSelection.GetFirst();
while(node)
{
wxSFShapeBase* pShape = node->GetData();
// scale main parent shape
if(!pShape->IsKindOf(CLASSINFO(wxSFLineShape)))
{
dx = (pShape->GetAbsolutePosition().x - (GetAbsolutePosition().x + sfDEFAULT_ME_OFFSET))/(GetRectSize().x - 2*sfDEFAULT_ME_OFFSET)*handle.GetDelta().x;
if(pShape->ContainsStyle(sfsSIZE_CHANGE))pShape->Scale(sx, 1, sfWITHCHILDREN);
if(pShape->ContainsStyle(sfsPOSITION_CHANGE))pShape->MoveBy(dx, 0);
if( ! pShape->ContainsStyle( sfsNO_FIT_TO_CHILDREN ) ) pShape->FitToChildren();
}
else
{
if(pShape->ContainsStyle(sfsPOSITION_CHANGE))
{
pLine = (wxSFLineShape*)pShape;
ptnode = pLine->GetControlPoints().GetFirst();
while(ptnode)
{
pt = ptnode->GetData();
dx = ( pt->x - (GetAbsolutePosition().x + sfDEFAULT_ME_OFFSET))/(GetRectSize().x - 2*sfDEFAULT_ME_OFFSET)*handle.GetDelta().x;
pt->x += dx;
pt->x = floor(pt->x);
ptnode = ptnode->GetNext();
}
}
}
node = node->GetNext();
}
}
}
void wxSFShapeBase::_OnDragging(const wxPoint& pos)
{
//wxASSERT(m_pParentManager);
if( !m_pParentManager )return;
if(m_fVisible && m_fActive && (m_nStyle & sfsPOSITION_CHANGE))
{
if(m_fFirstMove)
{
m_nMouseOffset = wxRealPoint(pos.x, pos.y) - this->GetAbsolutePosition();
}
// get shape BB BEFORE movement and combine it with BB of assigned lines
wxRect prevBB;
GetCompleteBoundingBox(prevBB, bbSELF | bbCONNECTIONS | bbCHILDREN | bbSHADOW);
this->MoveTo(pos.x - m_nMouseOffset.x, pos.y - m_nMouseOffset.y);
this->OnDragging(pos);
// GUI controls in child control shapes must be updated explicitely
wxSFControlShape *pCtrl;
ShapeList lstChildCtrls;
GetChildShapes( CLASSINFO(wxSFControlShape), lstChildCtrls, sfRECURSIVE );
ShapeList::compatibility_iterator node = lstChildCtrls.GetFirst();
while( node )
{
pCtrl = (wxSFControlShape*) node->GetData();
pCtrl->UpdateControl();
node = node->GetNext();
}
// get shape BB AFTER movement and combine it with BB of assigned lines
wxRect currBB;
GetCompleteBoundingBox(currBB, bbSELF | bbCONNECTIONS | bbCHILDREN | bbSHADOW);
// update canvas
Refresh( prevBB.Union(currBB), sfDELAYED );
m_fFirstMove = false;
}
if( GetParentShape() && (m_nStyle & sfsPROPAGATE_DRAGGING) )
{
GetParentShape()->_OnDragging( pos );
}
}
void wxSFDiagramManager::GetShapesAtPosition(const wxPoint& pos, ShapeList& shapes)
{
shapes.Clear();
wxSFShapeBase *pShape;
ShapeList lstShapes;
GetShapes(CLASSINFO(wxSFShapeBase), lstShapes);
ShapeList::compatibility_iterator node = lstShapes.GetFirst();
while(node)
{
pShape = node->GetData();
if(pShape->IsVisible() && pShape->IsActive() && pShape->Contains(pos))shapes.Append(pShape);
node = node->GetNext();
}
}
void wxSFDiagramManager::GetShapesInside(const wxRect& rct, ShapeList& shapes)
{
shapes.Clear();
wxSFShapeBase* pShape;
ShapeList lstShapes;
GetShapes(CLASSINFO(wxSFShapeBase), lstShapes);
ShapeList::compatibility_iterator node = lstShapes.GetFirst();
while(node)
{
pShape = node->GetData();
if(pShape->IsVisible() && pShape->IsActive() && pShape->Intersects(rct))shapes.Append(pShape);
node = node->GetNext();
}
}
void wxSFDiagramManager::UpdateAll()
{
wxSFShapeBase *pShape;
ShapeList lstShapes;
GetShapes( CLASSINFO(wxSFShapeBase), lstShapes );
ShapeList::compatibility_iterator node = lstShapes.GetFirst();
while( node )
{
pShape = node->GetData();
// update only shapes withour children because the Update() function is called recursively on all parents
if( !HasChildren( pShape ) ) pShape->Update();
node = node->GetNext();
}
}
void wxSFDiagramManager::MoveShapesFromNegatives()
{
wxSFShapeBase *pShape;
wxRealPoint shapePos;
double minx = 0, miny = 0;
// find the maximal negative position value
ShapeList shapes;
GetShapes(CLASSINFO(wxSFShapeBase), shapes);
ShapeList::compatibility_iterator node = shapes.GetFirst();
while(node)
{
shapePos = node->GetData()->GetAbsolutePosition();
if(node == shapes.GetFirst())
{
minx = shapePos.x;
miny = shapePos.y;
}
else
{
if(shapePos.x < minx)minx = shapePos.x;
if(shapePos.y < miny)miny = shapePos.y;
}
node = node->GetNext();
}
// move all parents shape so they (and their children) will be located in the positive values only
if((minx < 0) || (miny < 0))
{
node = shapes.GetFirst();
while(node)
{
pShape = node->GetData();
if(pShape->GetParentShape() == NULL)
{
if(minx < 0)pShape->MoveBy(abs((int)minx), 0);
if(miny < 0)pShape->MoveBy(0, abs((int)miny));
}
node = node->GetNext();
}
}
}
void wxSFMultiSelRect::OnEndHandle(wxSFShapeHandle& handle)
{
// inform all selected shapes about end of the handle dragging
if(GetParentCanvas())
{
ShapeList lstShapes;
GetParentCanvas()->GetSelectedShapes(lstShapes);
ShapeList::compatibility_iterator node = lstShapes.GetFirst();
while(node)
{
node->GetData()->OnEndHandle(handle);
node = node->GetNext();
}
}
}
void wxSFDiagramManager::UpdateConnections()
{
if( !m_lstLinesForUpdate.IsEmpty() )
{
wxSFLineShape* pLine;
IDPair* pIDPair;
// now check ids
long oldSrcId, oldTrgId;
long newSrcId, newTrgId;
IDList::compatibility_iterator idnode;
ShapeList::compatibility_iterator node = m_lstLinesForUpdate.GetFirst();
while(node)
{
pLine = (wxSFLineShape*)node->GetData();
newSrcId = oldSrcId = pLine->GetSrcShapeId();
newTrgId = oldTrgId = pLine->GetTrgShapeId();
idnode = m_lstIDPairs.GetFirst();
while(idnode)
{
pIDPair = idnode->GetData();
/*if(pIDPair->m_nNewID != pIDPair->m_nOldID)
{*/
if(oldSrcId == pIDPair->m_nOldID) newSrcId = pIDPair->m_nNewID;
if(oldTrgId == pIDPair->m_nOldID) newTrgId = pIDPair->m_nNewID;
/*}*/
idnode = idnode->GetNext();
}
pLine->SetSrcShapeId(newSrcId);
pLine->SetTrgShapeId(newTrgId);
// check whether line's src and trg shapes really exists
if(!GetItem(pLine->GetSrcShapeId()) || !GetItem(pLine->GetTrgShapeId()))
{
RemoveItem(pLine);
}
node = node->GetNext();
}
m_lstLinesForUpdate.Clear();
}
}
wxString wxSFShapeDataObject::SerializeSelectedShapes(const ShapeList& selection, wxSFDiagramManager* manager)
{
// create root node
wxSFShapeBase *pShape;
wxXmlNode *root = new wxXmlNode(wxXML_ELEMENT_NODE, wxT("chart"));
// serialize copied shapes to XML node
ShapeList::compatibility_iterator node = selection.GetFirst();
while(node)
{
pShape = node->GetData();
if(pShape)
{
// serialize parent's children
manager->SerializeObjects(pShape, root, serINCLUDE_PARENTS);
}
node = node->GetNext();
}
// create XML document in the memory stream
wxMemoryOutputStream outstream;
wxXmlDocument xmlDoc;
xmlDoc.SetRoot(root);
xmlDoc.Save(outstream);
char *buffer = new char [outstream.GetSize()];
if(buffer)
{
memset(buffer, 0, outstream.GetSize());
outstream.CopyTo(buffer, outstream.GetSize()-1);
wxString output(buffer, wxConvUTF8);
delete [] buffer;
return output;
}
else
return wxT("<?xml version=\"1.0\" encoding=\"utf-8\"?><chart />");
}
void wxSFDiagramManager::UpdateGrids()
{
if( !m_lstGridsForUpdate.IsEmpty() )
{
// now check ids
wxSFGridShape* pGrid;
IDPair* pIDPair;
int nIndex;
IDList::compatibility_iterator idnode;
ShapeList::compatibility_iterator node = m_lstGridsForUpdate.GetFirst();
while(node)
{
pGrid = (wxSFGridShape*)node->GetData();
nIndex = wxNOT_FOUND;
idnode = m_lstIDPairs.GetFirst();
while(idnode)
{
pIDPair = idnode->GetData();
nIndex = pGrid->m_arrCells.Index( pIDPair->m_nOldID );
if( nIndex != wxNOT_FOUND ) pGrid->m_arrCells[ nIndex ] = pIDPair->m_nNewID;
idnode = idnode->GetNext();
}
// check whether grid's children really exists
for( size_t i = 0; i < pGrid->m_arrCells.GetCount(); )
{
if( !GetItem( pGrid->m_arrCells[i] ) ) pGrid->RemoveFromGrid( pGrid->m_arrCells[i] );
else
i++;
}
node = node->GetNext();
}
m_lstGridsForUpdate.Clear();
}
}
bool wxSFShapeBase::AcceptCurrentlyDraggedShapes()
{
//wxASSERT(m_pParentManager);
//wxASSERT(m_pParentManager->GetShapeCanvas());
if(!m_pParentManager || !GetShapeManager()->GetShapeCanvas())return false;
if(!IsChildAccepted(wxT("All")))
{
ShapeList lstSelection;
GetShapeManager()->GetShapeCanvas()->GetSelectedShapes(lstSelection);
ShapeList::compatibility_iterator node = lstSelection.GetFirst();
while(node)
{
if(m_arrAcceptedChildren.Index(node->GetData()->GetClassInfo()->GetClassName()) == wxNOT_FOUND)return false;
node = node->GetNext();
}
}
return true;
}
void udStateChartOptimizer::FindTransWithIdenticalTarget(ShapeList& transitions, ShapeList& sublist)
{
sublist.Clear();
ShapeList::compatibility_iterator node = transitions.GetFirst();
if( !node ) return;
wxSFLineShape *pTrans = (wxSFLineShape*)node->GetData();
int nTrgId = pTrans->GetTrgShapeId();
while(node)
{
pTrans = (wxSFLineShape*)node->GetData();
if( pTrans->GetTrgShapeId() == nTrgId )
{
node = node->GetNext();
transitions.DeleteObject(pTrans);
sublist.Append(pTrans);
}
else
node = node->GetNext();
}
}
bool wxSFMultiSelRect::AnyHeightExceeded(const wxPoint& delta)
{
if(GetParentCanvas())
{
wxSFShapeBase* pShape;
ShapeList m_lstSelection;
GetParentCanvas()->GetSelectedShapes(m_lstSelection);
// first determine whether any shape in the selection exceeds its bounds
ShapeList::compatibility_iterator node = m_lstSelection.GetFirst();
while(node)
{
pShape = node->GetData();
if(!pShape->IsKindOf(CLASSINFO(wxSFLineShape)))
if((pShape->GetBoundingBox().GetHeight() + delta.y) <= 1)return true;
node = node->GetNext();
}
return false;
}
return true;
}
void wxSFDiagramManager::RemoveShape(wxSFShapeBase* shape, bool refresh)
{
if(shape)
{
wxSFShapeBase *pParent = shape->GetParentShape();
// remove connected lines (to all children)
ShapeList lstChildren;
ShapeList lstConnections;
ShapeList lstRemovedConnections;
// get all shape's children
shape->GetChildShapes(sfANY, lstChildren, sfRECURSIVE);
lstChildren.Append(shape);
// retrieve all assigned lines
ShapeList::compatibility_iterator snode = lstChildren.GetFirst();
while(snode)
{
GetAssignedConnections(snode->GetData(), CLASSINFO(wxSFLineShape), wxSFShapeBase::lineBOTH, lstConnections);
snode = snode->GetNext();
}
// remove all assigne lines
ShapeList::compatibility_iterator node = lstConnections.GetFirst();
while(node)
{
// one connection may be used by the parent and also by his child
if(lstRemovedConnections.IndexOf(node->GetData()) == wxNOT_FOUND)
{
lstRemovedConnections.Append(node->GetData());
RemoveShape(node->GetData(), false);
}
node = node->GetNext();
}
// remove the shape also from m_lstCurrentShapes list
if( m_pShapeCanvas ) m_pShapeCanvas->RemoveFromTemporaries( shape );
// remove the shape
RemoveItem(shape);
if( pParent ) pParent->Update();
if( refresh && m_pShapeCanvas ) m_pShapeCanvas->Refresh(false);
}
}
void wxSFShapeBase::_GetNeighbours(ShapeList& neighbours, wxClassInfo *shapeInfo, CONNECTMODE condir, bool direct)
{
//wxASSERT(m_pParentManager);
if( m_pParentManager )
{
if( m_lstProcessed.IndexOf(this) != wxNOT_FOUND )return;
ShapeList lstConnections;
wxSFLineShape *pLine;
wxSFShapeBase *pOposite = NULL;
GetAssignedConnections(shapeInfo, condir, lstConnections);
// find oposite shpes in direct branches
ShapeList::compatibility_iterator node = lstConnections.GetFirst();
while(node)
{
pLine = (wxSFLineShape*)node->GetData();
switch(condir)
{
case lineSTARTING:
pOposite = GetShapeManager()->FindShape(pLine->GetTrgShapeId());
break;
case lineENDING:
pOposite = GetShapeManager()->FindShape(pLine->GetSrcShapeId());
break;
case lineBOTH:
{
if(GetId() == pLine->GetSrcShapeId())pOposite = GetShapeManager()->FindShape(pLine->GetTrgShapeId());
else
pOposite = GetShapeManager()->FindShape(pLine->GetSrcShapeId());
}
}
// add oposite shape to the list (if applicable)
if(pOposite && !pOposite->IsKindOf(CLASSINFO(wxSFLineShape)) && ( neighbours.IndexOf(pOposite) == wxNOT_FOUND )) neighbours.Append(pOposite);
// find next shapes
if( !direct && pOposite )
{
// in the case of indirect branches we must differentiate between connections
// and ordinary shapes
m_lstProcessed.Append(this);
if( pOposite->IsKindOf(CLASSINFO(wxSFLineShape)) )
{
pLine = (wxSFLineShape*)pOposite;
switch(condir)
{
case lineSTARTING:
{
pOposite = GetShapeManager()->FindShape( pLine->GetSrcShapeId() );
if( pOposite->IsKindOf(CLASSINFO(wxSFLineShape)) )pOposite->_GetNeighbours(neighbours, shapeInfo, condir, direct);
else if( neighbours.IndexOf(pOposite) == wxNOT_FOUND )neighbours.Append(pOposite);
}
break;
case lineENDING:
{
pOposite = GetShapeManager()->FindShape( pLine->GetTrgShapeId() );
if( pOposite->IsKindOf(CLASSINFO(wxSFLineShape)) )pOposite->_GetNeighbours(neighbours, shapeInfo, condir, direct);
else if( neighbours.IndexOf(pOposite) == wxNOT_FOUND )neighbours.Append(pOposite);
}
break;
case lineBOTH:
{
pOposite = GetShapeManager()->FindShape( pLine->GetSrcShapeId() );
if( pOposite->IsKindOf(CLASSINFO(wxSFLineShape)) )pOposite->_GetNeighbours(neighbours, shapeInfo, condir, direct);
else if( neighbours.IndexOf(pOposite) == wxNOT_FOUND )neighbours.Append(pOposite);
pOposite = GetShapeManager()->FindShape( pLine->GetTrgShapeId() );
if( pOposite->IsKindOf(CLASSINFO(wxSFLineShape)) )pOposite->_GetNeighbours(neighbours, shapeInfo, condir, direct);
else if( neighbours.IndexOf(pOposite) == wxNOT_FOUND )neighbours.Append(pOposite);
}
break;
}
}
else
pLine->_GetNeighbours(neighbours, shapeInfo, condir, direct);
}
node = node->GetNext();
}
}
}
bool udStateChartOptimizer::MergeTransitions(udDiagramItem *src)
{
bool fFirstRun, fConditionLess, fMerged = false;
int nIndex;
wxString sNewCondition;//, sCondString;
//udCodeItem *pCondition;
udConditionItem *pNewCond;
wxSFShapeBase *pState;
wxSFLineShape *pTrans;
udTransElementItem *pLineElement;
ShapeList lstStates, lstTransitions, lstSubTrans, lstSubActs;
udLanguage *pLang = m_pGenerator->GetActiveLanguage();
// get all (pseudo) states in the source diagram
PaletteArray *pDiagramElements = m_mapElementPalettes[src->GetDiagramType()];
if( !pDiagramElements ) return false;
for( size_t i = 0; i < pDiagramElements->GetCount(); i++ )
{
if( pDiagramElements->Item(i).m_nType == udPaletteItem::pitELEMENT )
{
src->GetDiagramManager().GetShapes(wxClassInfo::FindClass(pDiagramElements->Item(i).m_sClassName), lstStates);
}
}
ShapeList::compatibility_iterator snode = lstStates.GetFirst();
while(snode)
{
pState = snode->GetData();
// get all transitions starting in this state
src->GetDiagramManager().GetAssignedConnections(pState, CLASSINFO(umlTransitionItem), wxSFShapeBase::lineSTARTING, lstTransitions);
while( lstTransitions.GetFirst() )
{
// get subsets with identical targets
FindTransWithIdenticalTarget(lstTransitions, lstSubTrans);
if( lstSubTrans.GetCount() > 1 )
{
nIndex = 1;
while( lstSubTrans.GetFirst() )
{
// get subsets with actions
FindTransWithIdenticalActions(lstSubTrans, lstSubActs);
if( lstSubActs.GetCount() > 1 )
{
// create combined action
fFirstRun = true;
fConditionLess = false;
sNewCondition = wxT("");
ShapeList::compatibility_iterator anode = lstSubActs.GetFirst();
while( anode )
{
pTrans = (wxSFLineShape*)anode->GetData();
pLineElement = (udTransElementItem*)pTrans->GetUserData();
//pCondition = ((udTransElementItem*)pTrans->GetUserData())->GetCondition();
//sCondString = ((udTransElementItem*)pTrans->GetUserData())->GetConditionString( pLang );
if( !pLineElement->HasCondition() )
{
sNewCondition = wxT("");
fConditionLess = true;
}
if( fFirstRun )
{
if( !fConditionLess )sNewCondition << wxT("( ") << pLineElement->GetConditionAsString( udCodeItem::cfCALL, pLang ); //pCondition->ToString( udCodeItem::cfCALL, pLang );
fFirstRun = false;
}
else
{
if( !fConditionLess )sNewCondition << wxT(" ) ") << pLang->Or() << wxT(" ( ") << pLineElement->GetConditionAsString( udCodeItem::cfCALL, pLang );//pCondition->ToString( udCodeItem::cfCALL, pLang );
// remove partial transition
src->GetDiagramManager().RemoveShape(pTrans, false);
}
anode = anode->GetNext();
}
if( !fConditionLess )sNewCondition << wxT(" )");
pLineElement = (udTransElementItem*)lstSubActs.GetFirst()->GetData()->GetUserData();
// create new guard string
//pLineElement->SetConditionString(sNewCondition);
pNewCond = new udConditionItem();
pNewCond->SetInline( true );
pNewCond->SetCode( sNewCondition );
// clear previous condition
pLineElement->ClearCodeItems( CLASSINFO(udConditionItem) );
pLineElement->ClearCodeItems( CLASSINFO(udEventItem) );
// set new condition
pLineElement->AssignCodeItem( pNewCond );
pLineElement->SetName(wxString::Format(wxT("Optimized transition %d"), nIndex));
nIndex++;
fMerged = true;
}
}
}
}
snode = snode->GetNext();
}
return fMerged;
}
bool udStateChartOptimizer::MergeDirectBranches(udDiagramItem *src)
{
bool fMerged = false;
wxString sNewAction;
m_lstProcessed.Clear();
m_lstBranches.Clear();
// find all direct diagram branches
ShapeList *pBranch, lstST, lstET;
ShapeList lstInitialStates;
src->GetDiagramManager().GetShapes(CLASSINFO(umlInitialItem), lstInitialStates);
src->GetDiagramManager().GetShapes(CLASSINFO(umlEntryItem), lstInitialStates);
src->GetDiagramManager().GetShapes(CLASSINFO(umlHistoryItem), lstInitialStates);
ShapeList::compatibility_iterator node = lstInitialStates.GetFirst();
while( node )
{
TrackBranch(node->GetData(), NULL, NULL);
node = node->GetNext();
}
if( m_lstBranches.GetFirst() )
{
wxSFShapeBase *pFirst, *pLast, *pState;
wxSFLineShape *pUpdatedTransition, *pTrans;
udTransElementItem *pUpdTransElement, *pTransElement;
// process all branches containing more than one state
BranchList::compatibility_iterator bnode = m_lstBranches.GetFirst();
while( bnode )
{
pBranch = bnode->GetData();
if( pBranch->GetCount() > 1 )
{
pFirst = pBranch->GetFirst()->GetData();
pLast = pBranch->GetLast()->GetData();
// get previous state of the first state
lstET.Clear();
src->GetDiagramManager().GetAssignedConnections(pFirst, CLASSINFO(umlTransitionItem), wxSFShapeBase::lineENDING, lstET);
pUpdatedTransition = (wxSFLineShape*)lstET.GetFirst()->GetData();
pUpdTransElement = (udTransElementItem*)pUpdatedTransition->GetUserData();
// reconnect updated transition
pUpdatedTransition->SetTrgShapeId(pLast->GetId());
ShapeList::compatibility_iterator snode = pBranch->GetFirst();
while( snode && (snode != pBranch->GetLast()) )
{
pState = snode->GetData();
// get outcomming transition
lstST.Clear();
src->GetDiagramManager().GetAssignedConnections(pState, CLASSINFO(umlTransitionItem), wxSFShapeBase::lineSTARTING, lstST);
pTrans = (wxSFLineShape*)lstST.GetFirst()->GetData();
// get action list from the transition
pTransElement = (udTransElementItem*)pTrans->GetUserData();
if( pTransElement->HasActions() )
{
if( !pUpdTransElement->HasActions() )
{
//pUpdTransElement->SetActionString(pTransElement->GetActionsString());
pUpdTransElement->ClearCodeItems( CLASSINFO(udActionItem) );
pUpdTransElement->CopyActionItems( pTransElement );
}
else
//pUpdTransElement->SetActionString(pUpdTransElement->GetActionsString() + wxT(", ") + pTransElement->GetActionsString());
pUpdTransElement->CopyActionItems( pTransElement );
}
// remove ununsed states and transition from automaton
src->GetDiagramManager().RemoveShape(pState);
fMerged = true;
snode = snode->GetNext();
}
}
bnode = bnode->GetNext();
}
}
// clean up
m_lstProcessed.Clear();
m_lstBranches.DeleteContents(true);
m_lstBranches.Clear();
m_lstBranches.DeleteContents(false);
return fMerged;
}
void udStateChartOptimizer::TrackBranch(wxSFShapeBase *state, wxSFLineShape *intrans, ShapeList *branch)
{
wxASSERT(state);
if( !state ) return;
wxSFDiagramManager *pManager = (wxSFDiagramManager*)state->GetParentManager();
wxASSERT(pManager);
if( !pManager ) return;
wxSFShapeBase *pSrcState;
wxSFLineShape *pTrans;
udTransElementItem *pTransElement;
ShapeList lstST, lstET, lstST2;
pManager->GetAssignedConnections(state, CLASSINFO(umlTransitionItem), wxSFShapeBase::lineSTARTING, lstST);
pManager->GetAssignedConnections(state, CLASSINFO(umlTransitionItem), wxSFShapeBase::lineENDING, lstET);
//if there are any ending transitions in the state then we can proceed to another step...
if( intrans && lstET.GetFirst()
&& !udPROJECT::GetDiagramElement( state )->IsKindOf(CLASSINFO(udSubDiagramElementItem))
&& !state->IsKindOf(CLASSINFO(umlCompStateItem)))
{
pTransElement = (udTransElementItem*)intrans->GetUserData();
// if the transition is conditionless then insert it into branch buffer
if( pTransElement && !pTransElement->HasCondition() )
{
lstST2.Clear();
// determine whether this transition is only one path from previous state
pSrcState = pManager->FindShape(intrans->GetSrcShapeId());
pManager->GetAssignedConnections(pSrcState, CLASSINFO(umlTransitionItem), wxSFShapeBase::lineSTARTING, lstST2);
if( lstST2.GetCount() == 1 )
{
// if current branch list exists then use it, otherwise create new branch and append it to branches list
if(branch)
{
branch->Append(state);
}
else
{
branch = new ShapeList;
branch->Append(state);
m_lstBranches.Append(branch);
}
if((lstST.GetCount()>1)||(lstET.GetCount()>1)||state->IsKindOf(CLASSINFO(umlHistoryItem)))branch = NULL;
}
else
branch = NULL;
}
else
{
// this state is not part of direct branch so reset the current branch list
branch = NULL;
}
}
else
{
// this state is not part of direct branch so reset the current branch list
branch = NULL;
}
// add state to 'processed' list
if(m_lstProcessed.IndexOf(state)==wxNOT_FOUND)
{
m_lstProcessed.Append(state);
// check next states
ShapeList::compatibility_iterator node = lstST.GetFirst();
while(node)
{
pTrans = (wxSFLineShape*)node->GetData();
TrackBranch(pManager->FindShape(pTrans->GetTrgShapeId()), pTrans, branch);
node = node->GetNext();
}
}
}
bool udStateChartOptimizer::InvertConditions(udDiagramItem *src)
{
bool fInverted = false;
long nTmpId;
ShapeList lstStates, lstTrans;
umlTransitionItem *pFirstTrans, *pSecondTrans;
udTransElementItem *pFirstTranElement, *pSecondTranElement;
// get all (pseudo) states in the source diagram
PaletteArray *pDiagramElements = m_mapElementPalettes[src->GetDiagramType()];
if( !pDiagramElements ) return false;
for( size_t i = 0; i < pDiagramElements->GetCount(); i++ )
{
if( pDiagramElements->Item(i).m_nType == udPaletteItem::pitELEMENT )
{
src->GetDiagramManager().GetShapes(wxClassInfo::FindClass(pDiagramElements->Item(i).m_sClassName), lstStates);
}
}
ShapeList::compatibility_iterator snode = lstStates.GetFirst();
while( snode )
{
lstTrans.Clear();
src->GetDiagramManager().GetAssignedConnections(snode->GetData(), CLASSINFO(umlTransitionItem), wxSFShapeBase::lineSTARTING, lstTrans);
// optimize only states with two outcomming transitions
if( lstTrans.GetCount() == 2 )
{
pFirstTrans = (umlTransitionItem*)lstTrans.Item(0)->GetData();
pFirstTranElement = (udTransElementItem*)pFirstTrans->GetUserData();
pSecondTrans = (umlTransitionItem*)lstTrans.Item(1)->GetData();
pSecondTranElement = (udTransElementItem*)pSecondTrans->GetUserData();
if( !pSecondTranElement->HasCondition() )
{
if( pSecondTranElement->HasActions() &&
pFirstTranElement->HasCondition() &&
!pFirstTranElement->HasActions() )
{
// create new condition
udCodeItem *pCond = (udCodeItem*)pFirstTranElement->GetCondition( udfORIGINAL )->Clone();
pCond->SetInverted( true );
// clear previous condition and assign the new one
pFirstTranElement->ClearCodeItems( CLASSINFO(udConditionItem) );
pFirstTranElement->ClearCodeItems( CLASSINFO(udEventItem) );
pFirstTranElement->AssignCodeItem( pCond );
// copy actions form second transition to the first
pFirstTranElement->CopyActionItems( pSecondTranElement );
// clear actions in the second transition
pSecondTranElement->ClearCodeItems( CLASSINFO(udActionItem) );
// swap targets
nTmpId = pFirstTrans->GetTrgShapeId();
pFirstTrans->SetTrgShapeId(pSecondTrans->GetTrgShapeId());
pSecondTrans->SetTrgShapeId(nTmpId);
fInverted = true;
}
}
else if( !pFirstTranElement->HasCondition() )
{
if( pFirstTranElement->HasActions() &&
pSecondTranElement->HasCondition() &&
!pSecondTranElement->HasActions() )
{
// create new condition
udCodeItem *pCond = (udCodeItem*)pSecondTranElement->GetCondition( udfORIGINAL )->Clone();
pCond->SetInverted( true );
// clear previous condition and assign the new one
pSecondTranElement->ClearCodeItems( CLASSINFO(udConditionItem) );
pSecondTranElement->ClearCodeItems( CLASSINFO(udEventItem) );
pSecondTranElement->AssignCodeItem( pCond );
// copy actions form second transition to the first
pSecondTranElement->CopyActionItems( pFirstTranElement );
// clear actions in the second transition
pFirstTranElement->ClearCodeItems( CLASSINFO(udActionItem) );
// swap targets
nTmpId = pSecondTrans->GetTrgShapeId();
pSecondTrans->SetTrgShapeId(pFirstTrans->GetTrgShapeId());
pFirstTrans->SetTrgShapeId(nTmpId);
fInverted = true;
}
}
}
snode = snode->GetNext();
}
return fInverted;
}
wxSFShapeBase* wxSFDiagramManager::GetShapeAtPosition(const wxPoint& pos, int zorder, SEARCHMODE mode)
{
int nCounter = 0;
ShapeList m_lstSortedShapes;
wxSFShapeBase* pShape;
// sort shapes list in the way that the line shapes will be at the top of the list
ShapeList shapes;
GetShapes(CLASSINFO(wxSFShapeBase), shapes, xsSerializable::searchBFS);
ShapeList::compatibility_iterator node = shapes.GetFirst();
while(node)
{
pShape = node->GetData();
if(pShape->IsKindOf(CLASSINFO(wxSFLineShape)))
{
m_lstSortedShapes.Insert(pShape);
nCounter++;
}
else
m_lstSortedShapes.Insert(nCounter, pShape);
node = node->GetNext();
}
// find the topmost shape according to the given rules
nCounter = 1;
node = m_lstSortedShapes.GetFirst();
while(node)
{
pShape = (wxSFShapeBase*)node->GetData();
if(pShape->IsVisible() && pShape->IsActive() && pShape->Contains(pos))
{
switch(mode)
{
case searchSELECTED:
if(pShape->IsSelected())
{
if(nCounter == zorder)return pShape;
else
nCounter++;
}
break;
case searchUNSELECTED:
if(!pShape->IsSelected())
{
if(nCounter == zorder)return pShape;
else
nCounter++;
}
break;
case searchBOTH:
if(nCounter == zorder)return pShape;
else
nCounter++;
break;
}
}
node = node->GetNext();
}
return NULL;
}
void wxSFShapeBase::_GetCompleteBoundingBox(wxRect &rct, int mask)
{
//wxASSERT(m_pParentManager);
if(!m_pParentManager)return;
if( m_lstProcessed.IndexOf(this) != wxNOT_FOUND )return;
else
m_lstProcessed.Append(this);
ShapeList lstChildren;
//SerializableList lstConnections;
// firts, get bounding box of the current shape
if(mask & bbSELF)
{
if(rct.IsEmpty())rct = this->GetBoundingBox().Inflate( abs(m_nHBorder), abs(m_nVBorder) );
else
rct.Union(this->GetBoundingBox().Inflate( abs(m_nHBorder), abs(m_nVBorder)) );
// add also shadow offset if neccessary
if( (mask & bbSHADOW) && (m_nStyle & sfsSHOW_SHADOW) && GetParentCanvas() )
{
wxRealPoint nOffset = GetParentCanvas()->GetShadowOffset();
if( nOffset.x < 0 )
{
rct.SetX(rct.GetX() + (int)nOffset.x);
rct.SetWidth(rct.GetWidth() - (int)nOffset.x);
}
else
rct.SetWidth(rct.GetWidth() + (int)nOffset.x);
if( nOffset.y < 0 )
{
rct.SetY(rct.GetY() + (int)nOffset.y);
rct.SetHeight(rct.GetHeight() - (int)nOffset.y);
}
else
rct.SetHeight(rct.GetHeight() + (int)nOffset.y);;
}
}
else
mask |= bbSELF;
// get list of all connection lines assigned to the shape and find their child shapes
if(mask & bbCONNECTIONS)
{
wxSFShapeBase *pLine;
ShapeList lstLines;
GetAssignedConnections( CLASSINFO(wxSFLineShape), lineBOTH, lstLines );
ShapeList::compatibility_iterator node = lstLines.GetFirst();
while(node)
{
pLine = node->GetData();
//rct.Union(pLine->GetBoundingBox());
lstChildren.Append(pLine);
// get children of the connections
pLine->GetChildShapes(sfANY, lstChildren);
node = node->GetNext();
}
}
// get children of this shape
if(mask & bbCHILDREN)
{
this->GetChildShapes(sfANY, lstChildren, sfNORECURSIVE);
// now, call this function for all children recursively...
ShapeList::compatibility_iterator node = lstChildren.GetFirst();
while(node)
{
node->GetData()->_GetCompleteBoundingBox(rct, mask);
node = node->GetNext();
}
}
}
wxSFShapeBase* wxSFDiagramManager::AddShape(wxSFShapeBase* shape, xsSerializable* parent, const wxPoint& pos, bool initialize, bool saveState, wxSF::ERRCODE *err)
{
if(shape)
{
if( shape->IsKindOf(CLASSINFO(wxSFShapeBase)) && IsShapeAccepted(shape->GetClassInfo()->GetClassName()) )
{
if( m_pShapeCanvas )
{
wxPoint newPos = m_pShapeCanvas->FitPositionToGrid(m_pShapeCanvas->DP2LP(pos));
shape->SetRelativePosition( Conv2RealPoint(newPos) );
}
else
shape->SetRelativePosition( Conv2RealPoint(pos) );
// add parent shape to the data manager (serializer)
if(parent)
{
AddItem(parent, shape);
}
else
AddItem(GetRootItem(), shape);
// initialize added shape
if(initialize)
{
shape->CreateHandles();
if( m_pShapeCanvas )
{
shape->SetHoverColour(m_pShapeCanvas->GetHoverColour());
}
if(HasChildren(shape))
{
wxSFShapeBase* pChild;
ShapeList lstChildren;
// get shape's children (if exist)
shape->GetChildShapes(sfANY, lstChildren, sfRECURSIVE);
// initialize shape's children
ShapeList::compatibility_iterator node = lstChildren.GetFirst();
while(node)
{
pChild = (wxSFShapeBase*)node->GetData();
pChild->CreateHandles();
pChild->Update();
if( m_pShapeCanvas )
{
pChild->SetHoverColour(m_pShapeCanvas->GetHoverColour());
}
node = node->GetNext();
}
}
}
// reset scale of assigned shape canvas (if exists and it is necessary...)
if( m_pShapeCanvas && shape->IsKindOf( CLASSINFO(wxSFControlShape) ) )
{
m_pShapeCanvas->SetScale( 1 );
}
if( m_pShapeCanvas )
{
if( saveState )
{
m_pShapeCanvas->SaveCanvasState();
}
}
if( err ) *err = wxSF::errOK;
}
else
{
//wxMessageBox(wxString::Format(wxT("Unable to add '%s' class object to the canvas"), shape->GetClassInfo()->GetClassName()), wxT("ShapeFramework"), wxICON_WARNING);
delete shape;
shape = NULL;
if( err ) *err = wxSF::errNOT_ACCEPTED;
}
}
else if( err ) *err = wxSF::errINVALID_INPUT;
return shape;
}
//**************************************************
bool wxSFBotLineShape::LineCanConnect(wxSFShapeBase* pShapeUnder)
{
ShapeList m_lstLines;
if(!GetShapeManager()->GetShapes(CLASSINFO(wxSFBotLineShape), m_lstLines))
return true;
wxSFShapeBase *pSrc = GetShapeManager()->FindShape(GetSrcShapeId());
wxSFShapeBase *pTrg = pShapeUnder;
wxSFBotLineShape* pLine = (wxSFBotLineShape*)NULL;
ShapeList::compatibility_iterator ciLine;
//Если фигура источник, хочет присоедениться к фигуре источнику
if(pSrc == pTrg) return false;
//Если фигура источник - цикл, при этом соединяется с другой фигурой в составе цикла
//то проверим что бы фигура с которой соединяемся была в составе фигуры источника
if( pSrc->GetParentShape() )
{
//if( pSrc->IsKindOf(CLASSINFO(wxSFCycle)) )
if( pTrg->GetParentShape() )
{
if( pTrg->GetParent() != pSrc )
if( pSrc->GetParentShape() != pTrg->GetParentShape() ) return false;
}
else return false;
}
else
if( pSrc->IsKindOf(CLASSINFO(wxSFCycle)) )
if( pTrg->GetParentShape() )
if( pSrc != pTrg->GetParentShape() ) return false;
//Если фигура назначения в составе другой фигуры, то проверим что бы фигура контейнер была на том же уровне
//что и фигура источник
if( pTrg->GetParentShape() )
if( pSrc->GetParentShape() )
{
if( pSrc->GetParentShape() != pTrg->GetParentShape() )
if( pSrc != pTrg->GetParentShape() ) return false;
}
else
if( pSrc != pTrg->GetParentShape() ) return false;
ciLine = m_lstLines.GetFirst();
while(ciLine)
{
pLine = (wxSFBotLineShape*)ciLine->GetData();
//Если фигура источник имеет тип - цикл, то может иметь 2 исходящих соединения,
//все остальные фигуры только по одному
if( pTrg->IsKindOf(CLASSINFO(wxSFCycle)) )
{
if( (pLine != this) &&
(pLine->GetTrgShapeId() == pTrg->GetId()) ) return false;
}
else
{
//Если фигура источник имеет уже исходящие соединения, то соединять не будем
if( (pLine != this) && //Удостоверимся что проверяем все линии кроме, той которой хотим соединить
(pLine->GetTrgShapeId() == pTrg->GetId()) ) return false;
}
ciLine = ciLine->GetNext();
}
long currentID = GetSrcShapeId();
long trgID = pShapeUnder->GetId();
bool broke = true;
while(broke)
{
broke = false;
ShapeList::compatibility_iterator node = m_lstLines.GetFirst();
while(node)
{
if(currentID == trgID)
return false;
pLine = (wxSFBotLineShape*)node->GetData();
if(pLine->GetTrgShapeId() == currentID)
{
if(pLine != this)
{
currentID = pLine->GetSrcShapeId();
broke = true;
}
}
node = node->GetNext();
}
}
return true;
}