void CmdSketcherEditSketch::activated(int iMsg)
{
Gui::SelectionFilter SketchFilter("SELECT Sketcher::SketchObject COUNT 1");
if (SketchFilter.match()) {
Sketcher::SketchObject *Sketch = static_cast<Sketcher::SketchObject*>(SketchFilter.Result[0][0].getObject());
openCommand("Edit Sketch");
doCommand(Gui,"Gui.activeDocument().setEdit('%s')",Sketch->getNameInDocument());
}
}
void CmdSketcherSelectConstraints::activated(int iMsg)
{
// get the selection
std::vector<Gui::SelectionObject> selection = getSelection().getSelectionEx();
Sketcher::SketchObject* Obj = dynamic_cast<Sketcher::SketchObject*>(selection[0].getObject());
// only one sketch with its subelements are allowed to be selected
if (selection.size() != 1) {
QMessageBox::warning(Gui::getMainWindow(), QObject::tr("Wrong selection"),
QObject::tr("Select elements from a single sketch."));
return;
}
// get the needed lists and objects
const std::vector<std::string> &SubNames = selection[0].getSubNames();
const std::vector< Sketcher::Constraint * > &vals = Obj->Constraints.getValues();
std::string doc_name = Obj->getDocument()->getName();
std::string obj_name = Obj->getNameInDocument();
std::stringstream ss;
getSelection().clearSelection();
// go through the selected subelements
for (std::vector<std::string>::const_iterator it=SubNames.begin(); it != SubNames.end(); ++it) {
// only handle edges
if (it->size() > 4 && it->substr(0,4) == "Edge") {
int GeoId = std::atoi(it->substr(4,4000).c_str()) - 1;
// push all the constraints
int i=1;
for (std::vector< Sketcher::Constraint * >::const_iterator it= vals.begin();
it != vals.end(); ++it,++i) {
if ( (*it)->First == GeoId || (*it)->Second == GeoId || (*it)->Third == GeoId){
ss.str(std::string());
ss << "Constraint" << i;
Gui::Selection().addSelection(doc_name.c_str(), obj_name.c_str(), ss.str().c_str());
}
}
}
}
}
QString TaskGrooveParameters::getReferenceAxis(void) const
{
// get the support and Sketch
PartDesign::Groove* pcGroove = static_cast<PartDesign::Groove*>(GrooveView->getObject());
Sketcher::SketchObject *pcSketch = static_cast<Sketcher::SketchObject*>(pcGroove->Sketch.getValue());
QString buf;
if (pcSketch) {
buf = QString::fromUtf8("(App.ActiveDocument.%1,[%2])");
buf = buf.arg(QString::fromUtf8(pcSketch->getNameInDocument()));
if (ui->axis->currentIndex() == 0)
buf = buf.arg(QString::fromUtf8("'V_Axis'"));
else if (ui->axis->currentIndex() == 1)
buf = buf.arg(QString::fromUtf8("'H_Axis'"));
else if (ui->axis->currentIndex() >= 2) {
buf = buf.arg(QString::fromUtf8("'Axis%1'"));
buf = buf.arg(ui->axis->currentIndex()-2);
}
}
else
buf = QString::fromUtf8("''");
return buf;
}
void CmdSketcherNewSketch::activated(int iMsg)
{
Gui::SelectionFilter SketchFilter("SELECT Sketcher::SketchObject COUNT 1");
Gui::SelectionFilter FaceFilter ("SELECT Part::Feature SUBELEMENT Face COUNT 1");
if (SketchFilter.match()) {
Sketcher::SketchObject *Sketch = static_cast<Sketcher::SketchObject*>(SketchFilter.Result[0][0].getObject());
openCommand("Edit Sketch");
doCommand(Gui,"Gui.activeDocument().setEdit('%s')",Sketch->getNameInDocument());
}
else if (FaceFilter.match()) {
// get the selected object
Part::Feature *part = static_cast<Part::Feature*>(FaceFilter.Result[0][0].getObject());
Base::Placement ObjectPos = part->Placement.getValue();
const std::vector<std::string> &sub = FaceFilter.Result[0][0].getSubNames();
if (sub.size() > 1){
// No assert for wrong user input!
QMessageBox::warning(Gui::getMainWindow(), QObject::tr("Several sub-elements selected"),
QObject::tr("You have to select a single face as support for a sketch!"));
return;
}
// get the selected sub shape (a Face)
const Part::TopoShape &shape = part->Shape.getValue();
TopoDS_Shape sh = shape.getSubShape(sub[0].c_str());
const TopoDS_Face& face = TopoDS::Face(sh);
if (face.IsNull()){
// No assert for wrong user input!
QMessageBox::warning(Gui::getMainWindow(), QObject::tr("No support face selected"),
QObject::tr("You have to select a face as support for a sketch!"));
return;
}
BRepAdaptor_Surface adapt(face);
if (adapt.GetType() != GeomAbs_Plane){
QMessageBox::warning(Gui::getMainWindow(), QObject::tr("No planar support"),
QObject::tr("You need a planar face as support for a sketch!"));
return;
}
std::string supportString = FaceFilter.Result[0][0].getAsPropertyLinkSubString();
// create Sketch on Face
std::string FeatName = getUniqueObjectName("Sketch");
openCommand("Create a Sketch on Face");
doCommand(Doc,"App.activeDocument().addObject('Sketcher::SketchObject','%s')",FeatName.c_str());
doCommand(Gui,"App.activeDocument().%s.Support = %s",FeatName.c_str(),supportString.c_str());
doCommand(Gui,"App.activeDocument().recompute()"); // recompute the sketch placement based on its support
//doCommand(Gui,"Gui.activeDocument().activeView().setCamera('%s')",cam.c_str());
doCommand(Gui,"Gui.activeDocument().setEdit('%s')",FeatName.c_str());
}
else {
// ask user for orientation
SketchOrientationDialog Dlg;
if (Dlg.exec() != QDialog::Accepted)
return; // canceled
Base::Vector3d p = Dlg.Pos.getPosition();
Base::Rotation r = Dlg.Pos.getRotation();
// do the right view direction
std::string camstring;
switch(Dlg.DirType){
case 0:
camstring = "#Inventor V2.1 ascii \\n OrthographicCamera {\\n viewportMapping ADJUST_CAMERA \\n position 0 0 87 \\n orientation 0 0 1 0 \\n nearDistance -112.88701 \\n farDistance 287.28702 \\n aspectRatio 1 \\n focalDistance 87 \\n height 143.52005 }";
break;
case 1:
camstring = "#Inventor V2.1 ascii \\n OrthographicCamera {\\n viewportMapping ADJUST_CAMERA \\n position 0 0 -87 \\n orientation -1 0 0 3.1415927 \\n nearDistance -112.88701 \\n farDistance 287.28702 \\n aspectRatio 1 \\n focalDistance 87 \\n height 143.52005 }";
break;
case 2:
camstring = "#Inventor V2.1 ascii \\n OrthographicCamera {\\n viewportMapping ADJUST_CAMERA\\n position 0 -87 0 \\n orientation -1 0 0 4.712389\\n nearDistance -112.88701\\n farDistance 287.28702\\n aspectRatio 1\\n focalDistance 87\\n height 143.52005\\n\\n}";
break;
case 3:
camstring = "#Inventor V2.1 ascii \\n OrthographicCamera {\\n viewportMapping ADJUST_CAMERA\\n position 0 87 0 \\n orientation 0 0.70710683 0.70710683 3.1415927\\n nearDistance -112.88701\\n farDistance 287.28702\\n aspectRatio 1\\n focalDistance 87\\n height 143.52005\\n\\n}";
break;
case 4:
camstring = "#Inventor V2.1 ascii \\n OrthographicCamera {\\n viewportMapping ADJUST_CAMERA\\n position 87 0 0 \\n orientation 0.57735026 0.57735026 0.57735026 2.0943952 \\n nearDistance -112.887\\n farDistance 287.28699\\n aspectRatio 1\\n focalDistance 87\\n height 143.52005\\n\\n}";
break;
case 5:
camstring = "#Inventor V2.1 ascii \\n OrthographicCamera {\\n viewportMapping ADJUST_CAMERA\\n position -87 0 0 \\n orientation -0.57735026 0.57735026 0.57735026 4.1887903 \\n nearDistance -112.887\\n farDistance 287.28699\\n aspectRatio 1\\n focalDistance 87\\n height 143.52005\\n\\n}";
break;
}
std::string FeatName = getUniqueObjectName("Sketch");
openCommand("Create a new Sketch");
doCommand(Doc,"App.activeDocument().addObject('Sketcher::SketchObject','%s')",FeatName.c_str());
doCommand(Doc,"App.activeDocument().%s.Placement = App.Placement(App.Vector(%f,%f,%f),App.Rotation(%f,%f,%f,%f))",FeatName.c_str(),p.x,p.y,p.z,r[0],r[1],r[2],r[3]);
doCommand(Gui,"Gui.activeDocument().activeView().setCamera('%s')",camstring.c_str());
doCommand(Gui,"Gui.activeDocument().setEdit('%s')",FeatName.c_str());
}
}
void CmdSketcherReorientSketch::activated(int iMsg)
{
Sketcher::SketchObject* sketch = Gui::Selection().getObjectsOfType<Sketcher::SketchObject>().front();
if (sketch->Support.getValue()) {
int ret = QMessageBox::question(Gui::getMainWindow(),
qApp->translate("Sketcher_ReorientSketch","Sketch has support"),
qApp->translate("Sketcher_ReorientSketch","Sketch with a support face cannot be reoriented.\n"
"Do you want to detach it from the support?"),
QMessageBox::Yes|QMessageBox::No);
if (ret == QMessageBox::No)
return;
sketch->Support.setValue(0);
}
// ask user for orientation
SketchOrientationDialog Dlg;
if (Dlg.exec() != QDialog::Accepted)
return; // canceled
Base::Vector3d p = Dlg.Pos.getPosition();
Base::Rotation r = Dlg.Pos.getRotation();
// do the right view direction
std::string camstring;
switch(Dlg.DirType){
case 0:
camstring = "#Inventor V2.1 ascii \\n OrthographicCamera {\\n viewportMapping ADJUST_CAMERA \\n "
"position 0 0 87 \\n orientation 0 0 1 0 \\n nearDistance -112.88701 \\n farDistance 287.28702 \\n "
"aspectRatio 1 \\n focalDistance 87 \\n height 143.52005 }";
break;
case 1:
camstring = "#Inventor V2.1 ascii \\n OrthographicCamera {\\n viewportMapping ADJUST_CAMERA \\n "
"position 0 0 -87 \\n orientation -1 0 0 3.1415927 \\n nearDistance -112.88701 \\n farDistance 287.28702 \\n "
"aspectRatio 1 \\n focalDistance 87 \\n height 143.52005 }";
break;
case 2:
camstring = "#Inventor V2.1 ascii \\n OrthographicCamera {\\n viewportMapping ADJUST_CAMERA\\n "
"position 0 -87 0 \\n orientation -1 0 0 4.712389\\n nearDistance -112.88701\\n farDistance 287.28702\\n "
"aspectRatio 1\\n focalDistance 87\\n height 143.52005\\n\\n}";
break;
case 3:
camstring = "#Inventor V2.1 ascii \\n OrthographicCamera {\\n viewportMapping ADJUST_CAMERA\\n "
"position 0 87 0 \\n orientation 0 0.70710683 0.70710683 3.1415927\\n nearDistance -112.88701\\n farDistance 287.28702\\n "
"aspectRatio 1\\n focalDistance 87\\n height 143.52005\\n\\n}";
break;
case 4:
camstring = "#Inventor V2.1 ascii \\n OrthographicCamera {\\n viewportMapping ADJUST_CAMERA\\n "
"position 87 0 0 \\n orientation 0.57735026 0.57735026 0.57735026 2.0943952 \\n nearDistance -112.887\\n farDistance 287.28699\\n "
"aspectRatio 1\\n focalDistance 87\\n height 143.52005\\n\\n}";
break;
case 5:
camstring = "#Inventor V2.1 ascii \\n OrthographicCamera {\\n viewportMapping ADJUST_CAMERA\\n "
"position -87 0 0 \\n orientation -0.57735026 0.57735026 0.57735026 4.1887903 \\n nearDistance -112.887\\n farDistance 287.28699\\n "
"aspectRatio 1\\n focalDistance 87\\n height 143.52005\\n\\n}";
break;
}
openCommand("Reorient Sketch");
doCommand(Doc,"App.ActiveDocument.%s.Placement = App.Placement(App.Vector(%f,%f,%f),App.Rotation(%f,%f,%f,%f))"
,sketch->getNameInDocument(),p.x,p.y,p.z,r[0],r[1],r[2],r[3]);
doCommand(Gui,"Gui.ActiveDocument.setEdit('%s')",sketch->getNameInDocument());
}