/// getSingleUnscheduledPred - If there is exactly one unscheduled predecessor
/// of SU, return it, otherwise return null.
SUnit *LatencyPriorityQueue::getSingleUnscheduledPred(SUnit *SU) {
SUnit *OnlyAvailablePred = 0;
for (SUnit::const_pred_iterator I = SU->Preds.begin(), E = SU->Preds.end();
I != E; ++I) {
if (IgnoreAntiDep &&
((I->getKind() == SDep::Anti) || (I->getKind() == SDep::Output)))
continue;
SUnit &Pred = *I->getSUnit();
if (!Pred.isScheduled) {
// We found an available, but not scheduled, predecessor. If it's the
// only one we have found, keep track of it... otherwise give up.
if (OnlyAvailablePred && OnlyAvailablePred != &Pred)
return 0;
OnlyAvailablePred = &Pred;
}
}
return OnlyAvailablePred;
}
/// CriticalPathStep - Return the next SUnit after SU on the bottom-up
/// critical path.
static const SDep *CriticalPathStep(const SUnit *SU) {
const SDep *Next = 0;
unsigned NextDepth = 0;
// Find the predecessor edge with the greatest depth.
for (SUnit::const_pred_iterator P = SU->Preds.begin(), PE = SU->Preds.end();
P != PE; ++P) {
const SUnit *PredSU = P->getSUnit();
unsigned PredLatency = P->getLatency();
unsigned PredTotalLatency = PredSU->getDepth() + PredLatency;
// In the case of a latency tie, prefer an anti-dependency edge over
// other types of edges.
if (NextDepth < PredTotalLatency ||
(NextDepth == PredTotalLatency && P->getKind() == SDep::Anti)) {
NextDepth = PredTotalLatency;
Next = &*P;
}
}
return Next;
}
unsigned CriticalAntiDepBreaker::
BreakAntiDependencies(const std::vector<SUnit>& SUnits,
MachineBasicBlock::iterator Begin,
MachineBasicBlock::iterator End,
unsigned InsertPosIndex,
DbgValueVector &DbgValues) {
// The code below assumes that there is at least one instruction,
// so just duck out immediately if the block is empty.
if (SUnits.empty()) return 0;
// Keep a map of the MachineInstr*'s back to the SUnit representing them.
// This is used for updating debug information.
DenseMap<MachineInstr*,const SUnit*> MISUnitMap;
// Find the node at the bottom of the critical path.
const SUnit *Max = 0;
for (unsigned i = 0, e = SUnits.size(); i != e; ++i) {
const SUnit *SU = &SUnits[i];
MISUnitMap[SU->getInstr()] = SU;
if (!Max || SU->getDepth() + SU->Latency > Max->getDepth() + Max->Latency)
Max = SU;
}
#ifndef NDEBUG
{
DEBUG(dbgs() << "Critical path has total latency "
<< (Max->getDepth() + Max->Latency) << "\n");
DEBUG(dbgs() << "Available regs:");
for (unsigned Reg = 0; Reg < TRI->getNumRegs(); ++Reg) {
if (KillIndices[Reg] == ~0u)
DEBUG(dbgs() << " " << TRI->getName(Reg));
}
DEBUG(dbgs() << '\n');
}
#endif
// Track progress along the critical path through the SUnit graph as we walk
// the instructions.
const SUnit *CriticalPathSU = Max;
MachineInstr *CriticalPathMI = CriticalPathSU->getInstr();
// Consider this pattern:
// A = ...
// ... = A
// A = ...
// ... = A
// A = ...
// ... = A
// A = ...
// ... = A
// There are three anti-dependencies here, and without special care,
// we'd break all of them using the same register:
// A = ...
// ... = A
// B = ...
// ... = B
// B = ...
// ... = B
// B = ...
// ... = B
// because at each anti-dependence, B is the first register that
// isn't A which is free. This re-introduces anti-dependencies
// at all but one of the original anti-dependencies that we were
// trying to break. To avoid this, keep track of the most recent
// register that each register was replaced with, avoid
// using it to repair an anti-dependence on the same register.
// This lets us produce this:
// A = ...
// ... = A
// B = ...
// ... = B
// C = ...
// ... = C
// B = ...
// ... = B
// This still has an anti-dependence on B, but at least it isn't on the
// original critical path.
//
// TODO: If we tracked more than one register here, we could potentially
// fix that remaining critical edge too. This is a little more involved,
// because unlike the most recent register, less recent registers should
// still be considered, though only if no other registers are available.
std::vector<unsigned> LastNewReg(TRI->getNumRegs(), 0);
// Attempt to break anti-dependence edges on the critical path. Walk the
// instructions from the bottom up, tracking information about liveness
// as we go to help determine which registers are available.
unsigned Broken = 0;
unsigned Count = InsertPosIndex - 1;
for (MachineBasicBlock::iterator I = End, E = Begin;
I != E; --Count) {
MachineInstr *MI = --I;
if (MI->isDebugValue())
continue;
// Check if this instruction has a dependence on the critical path that
// is an anti-dependence that we may be able to break. If it is, set
// AntiDepReg to the non-zero register associated with the anti-dependence.
//
// We limit our attention to the critical path as a heuristic to avoid
// breaking anti-dependence edges that aren't going to significantly
// impact the overall schedule. There are a limited number of registers
// and we want to save them for the important edges.
//
// TODO: Instructions with multiple defs could have multiple
// anti-dependencies. The current code here only knows how to break one
// edge per instruction. Note that we'd have to be able to break all of
// the anti-dependencies in an instruction in order to be effective.
unsigned AntiDepReg = 0;
if (MI == CriticalPathMI) {
if (const SDep *Edge = CriticalPathStep(CriticalPathSU)) {
const SUnit *NextSU = Edge->getSUnit();
// Only consider anti-dependence edges.
if (Edge->getKind() == SDep::Anti) {
AntiDepReg = Edge->getReg();
assert(AntiDepReg != 0 && "Anti-dependence on reg0?");
if (!RegClassInfo.isAllocatable(AntiDepReg))
// Don't break anti-dependencies on non-allocatable registers.
AntiDepReg = 0;
else if (KeepRegs.count(AntiDepReg))
// Don't break anti-dependencies if an use down below requires
// this exact register.
AntiDepReg = 0;
else {
// If the SUnit has other dependencies on the SUnit that it
// anti-depends on, don't bother breaking the anti-dependency
// since those edges would prevent such units from being
// scheduled past each other regardless.
//
// Also, if there are dependencies on other SUnits with the
// same register as the anti-dependency, don't attempt to
// break it.
for (SUnit::const_pred_iterator P = CriticalPathSU->Preds.begin(),
PE = CriticalPathSU->Preds.end(); P != PE; ++P)
if (P->getSUnit() == NextSU ?
(P->getKind() != SDep::Anti || P->getReg() != AntiDepReg) :
(P->getKind() == SDep::Data && P->getReg() == AntiDepReg)) {
AntiDepReg = 0;
break;
}
}
}
CriticalPathSU = NextSU;
CriticalPathMI = CriticalPathSU->getInstr();
} else {
// We've reached the end of the critical path.
CriticalPathSU = 0;
CriticalPathMI = 0;
}
}
PrescanInstruction(MI);
// If MI's defs have a special allocation requirement, don't allow
// any def registers to be changed. Also assume all registers
// defined in a call must not be changed (ABI).
if (MI->getDesc().isCall() || MI->getDesc().hasExtraDefRegAllocReq() ||
TII->isPredicated(MI))
// If this instruction's defs have special allocation requirement, don't
// break this anti-dependency.
AntiDepReg = 0;
else if (AntiDepReg) {
// If this instruction has a use of AntiDepReg, breaking it
// is invalid.
for (unsigned i = 0, e = MI->getNumOperands(); i != e; ++i) {
MachineOperand &MO = MI->getOperand(i);
if (!MO.isReg()) continue;
unsigned Reg = MO.getReg();
if (Reg == 0) continue;
if (MO.isUse() && TRI->regsOverlap(AntiDepReg, Reg)) {
AntiDepReg = 0;
break;
}
}
}
// Determine AntiDepReg's register class, if it is live and is
// consistently used within a single class.
const TargetRegisterClass *RC = AntiDepReg != 0 ? Classes[AntiDepReg] : 0;
assert((AntiDepReg == 0 || RC != NULL) &&
"Register should be live if it's causing an anti-dependence!");
if (RC == reinterpret_cast<TargetRegisterClass *>(-1))
AntiDepReg = 0;
// Look for a suitable register to use to break the anti-depenence.
//
// TODO: Instead of picking the first free register, consider which might
// be the best.
if (AntiDepReg != 0) {
std::pair<std::multimap<unsigned, MachineOperand *>::iterator,
std::multimap<unsigned, MachineOperand *>::iterator>
Range = RegRefs.equal_range(AntiDepReg);
if (unsigned NewReg = findSuitableFreeRegister(Range.first, Range.second,
AntiDepReg,
LastNewReg[AntiDepReg],
RC)) {
DEBUG(dbgs() << "Breaking anti-dependence edge on "
<< TRI->getName(AntiDepReg)
<< " with " << RegRefs.count(AntiDepReg) << " references"
<< " using " << TRI->getName(NewReg) << "!\n");
// Update the references to the old register to refer to the new
// register.
for (std::multimap<unsigned, MachineOperand *>::iterator
Q = Range.first, QE = Range.second; Q != QE; ++Q) {
Q->second->setReg(NewReg);
// If the SU for the instruction being updated has debug information
// related to the anti-dependency register, make sure to update that
// as well.
const SUnit *SU = MISUnitMap[Q->second->getParent()];
if (!SU) continue;
for (DbgValueVector::iterator DVI = DbgValues.begin(),
DVE = DbgValues.end(); DVI != DVE; ++DVI)
if (DVI->second == Q->second->getParent())
UpdateDbgValue(DVI->first, AntiDepReg, NewReg);
}
// We just went back in time and modified history; the
// liveness information for the anti-dependence reg is now
// inconsistent. Set the state as if it were dead.
Classes[NewReg] = Classes[AntiDepReg];
DefIndices[NewReg] = DefIndices[AntiDepReg];
KillIndices[NewReg] = KillIndices[AntiDepReg];
assert(((KillIndices[NewReg] == ~0u) !=
(DefIndices[NewReg] == ~0u)) &&
"Kill and Def maps aren't consistent for NewReg!");
Classes[AntiDepReg] = 0;
DefIndices[AntiDepReg] = KillIndices[AntiDepReg];
KillIndices[AntiDepReg] = ~0u;
assert(((KillIndices[AntiDepReg] == ~0u) !=
(DefIndices[AntiDepReg] == ~0u)) &&
"Kill and Def maps aren't consistent for AntiDepReg!");
RegRefs.erase(AntiDepReg);
LastNewReg[AntiDepReg] = NewReg;
++Broken;
}
}
ScanInstruction(MI, Count);
}
return Broken;
}