void XnFileDevice::Free()
{
for (XnNodeInfoMap::Iterator it = m_nodeInfoMap.begin(); it != m_nodeInfoMap.end(); ++it)
{
XnNodeInfo& nodeInfo = it.Value();
XN_DELETE(nodeInfo.pXnCodec);
}
m_nodeInfoMap.Clear();
if (m_ShiftToDepth.bIsInitialized)
{
XnShiftToDepthFree(&m_ShiftToDepth);
}
if (m_pInputStream != NULL)
{
XN_DELETE(m_pInputStream);
m_pInputStream = NULL;
}
if (m_pDataPacker != NULL)
{
m_pDataPacker->Free();
XN_DELETE(m_pDataPacker);
m_pDataPacker = NULL;
}
if (m_pStreamData != NULL)
{
XnStreamDataDestroy(&m_pStreamData);
m_pStreamData = NULL;
}
}
XnStatus XnFileDevice::Rewind()
{
XnStatus nRetVal = XN_STATUS_OK;
// go back to start of stream
nRetVal = m_pInputStream->Seek(XN_DEVICE_FILE_MAGIC_LEN);
XN_IS_STATUS_OK(nRetVal);
// read initial state
XN_PROPERTY_SET_CREATE_ON_STACK(state);
nRetVal = ReadInitialState(&state);
XN_IS_STATUS_OK(nRetVal);
// first handle current streams. remove or reset them
for (XnNodeInfoMap::Iterator it = m_nodeInfoMap.Begin(); it != m_nodeInfoMap.End(); ++it)
{
const XnChar* strName = it->Key();
if (m_bNodeCollectionChanged)
{
// we need to destroy all streams, and recreate them later
nRetVal = m_pNotifications->OnNodeRemoved(m_pNotificationsCookie, strName);
XN_IS_STATUS_OK(nRetVal);
}
else
{
// just reset frame ID
it->Value().nCurrFrameID = 0;
// and mark not to recreate it
nRetVal = m_ignoreNewNodes.Set(strName, it->Value());
XN_IS_STATUS_OK(nRetVal);
}
}
// if we need, recreate nodes
if (m_bNodeCollectionChanged)
{
nRetVal = SetInitialState(&state);
XN_IS_STATUS_OK(nRetVal);
}
// ResetLastTimestampAndFrame();
// m_nReferenceTimestamp = 0;
// m_nReferenceTime = 0;
m_bNodeCollectionChanged = FALSE;
m_nCurrTimestamp = 0;
return (XN_STATUS_OK);
}
void XnFileDevice::Free()
{
for (XnNodeInfoMap::Iterator it = m_nodeInfoMap.Begin(); it != m_nodeInfoMap.End(); ++it)
{
XnNodeInfo& nodeInfo = it->Value();
XN_DELETE(nodeInfo.pXnCodec);
if (nodeInfo.codec.IsValid())
{
xnRemoveNeededNode(GetSelfNodeHandle(), nodeInfo.codec);
nodeInfo.codec.Release();
}
}
m_nodeInfoMap.Clear();
if (m_ShiftToDepth.bIsInitialized)
{
XnShiftToDepthFree(&m_ShiftToDepth);
}
if (m_pInputStream != NULL)
{
XN_DELETE(m_pInputStream);
m_pInputStream = NULL;
}
if (m_pDataPacker != NULL)
{
m_pDataPacker->Free();
XN_DELETE(m_pDataPacker);
m_pDataPacker = NULL;
}
if (m_pStreamData != NULL)
{
XnStreamDataDestroy(&m_pStreamData);
m_pStreamData = NULL;
}
}
XnStatus XnFileDevice::BCSeekFrame(XnUInt32 nFrameID)
{
XnStatus nRetVal = XN_STATUS_OK;
XnDeviceFileFrameHeaderV3 FileFrameHeader;
XnUInt32 nReadBytes = 0;
XnUInt32 nShouldRead = 0;
XnInt32 nExpectedFrameID = 1;
// go back to start of file
nRetVal = Rewind();
XN_IS_STATUS_OK(nRetVal);
// Update the frame position to the new position (treat 0 as 1)
m_pBCData->nFramePos = XN_MAX(nFrameID, 1);
// Make sure we aren't trying to reach a frame that's beyond the number of frames
if (m_pBCData->nFramePos > m_pBCData->StreamProperties.nNumOfFrames)
{
// Set the frame position to the last frame
m_pBCData->nFramePos = m_pBCData->StreamProperties.nNumOfFrames;
}
// Set the file position to the first frame data (right after the file header)
XnUInt32 nOffset = 0;
switch (m_nFileVersion)
{
case 3:
nOffset = sizeof(XnDeviceFileHeader);
break;
case 2:
nOffset = sizeof(XnDeviceFileHeaderV2);
break;
case 1:
nOffset = sizeof(XnDeviceFileHeaderV1);
break;
default:
return (XN_STATUS_IO_INVALID_STREAM_HEADER);
}
nRetVal = m_pInputStream->Seek(nOffset);
XN_IS_STATUS_OK(nRetVal);
// Keep reading frames until we reach the wanted frame
XnUInt32 nCurrFilePos = 1;
while (nCurrFilePos < m_pBCData->nFramePos)
{
// Read the frame header
switch (m_nFileVersion)
{
case 3:
{
nShouldRead = nReadBytes = sizeof(XnDeviceFileFrameHeaderV3);
nRetVal = m_pInputStream->ReadData((XnUChar*)&FileFrameHeader, nReadBytes);
XN_IS_STATUS_OK(nRetVal);
nExpectedFrameID = nCurrFilePos;
}
break;
case 2:
{
XnDeviceFileFrameHeaderV2 FileFrameHeaderV2;
nShouldRead = nReadBytes = sizeof(XnDeviceFileFrameHeaderV2);
nRetVal = m_pInputStream->ReadData((XnUChar*)&FileFrameHeaderV2, nReadBytes);
XN_IS_STATUS_OK(nRetVal);
nRetVal = XnDeviceFileAdjustFileFrameHeaderV2(&FileFrameHeaderV2, &FileFrameHeader);
XN_IS_STATUS_OK(nRetVal);
nExpectedFrameID = nCurrFilePos - 1;
}
break;
case 1:
{
XnDeviceFileFrameHeaderV1 FileFrameHeaderV1;
nShouldRead = nReadBytes = sizeof(XnDeviceFileFrameHeaderV1);
nRetVal = m_pInputStream->ReadData((XnUChar*)&FileFrameHeaderV1, nReadBytes);
XN_IS_STATUS_OK(nRetVal);
nRetVal = XnDeviceFileAdjustFileFrameHeaderV1(&FileFrameHeaderV1, &FileFrameHeader);
XN_IS_STATUS_OK(nRetVal);
nExpectedFrameID = nCurrFilePos - 1;
}
break;
default:
return XN_STATUS_IO_INVALID_STREAM_HEADER;
}
// Make sure we got the right header size
if (nReadBytes != nShouldRead)
{
return (XN_STATUS_IO_INVALID_STREAM_FRAME_HEADER);
}
// Skip the frame data
XnUInt32 nPosition;
nRetVal = m_pInputStream->Tell(&nPosition);
XN_IS_STATUS_OK(nRetVal);
nRetVal = m_pInputStream->Seek(FileFrameHeader.nPackedStreamSize + nPosition);
XN_IS_STATUS_OK(nRetVal);
// increment streams frame ID
for (XnNodeInfoMap::Iterator it = m_nodeInfoMap.Begin(); it != m_nodeInfoMap.End(); ++it)
{
it->Value().nCurrFrameID++;
}
// Make sure frame ids are sequential
if (FileFrameHeader.FrameProperties.nDepthFrameID != nExpectedFrameID)
{
return (XN_STATUS_IO_STREAM_NOT_SEQUENTIAL);
}
// Update the current file frame position
nCurrFilePos++;
}
// now read last frame (the one we wanted)
XnBool bWrapOccured;
nRetVal = BCReadFrame(&bWrapOccured);
XN_IS_STATUS_OK(nRetVal);
return (XN_STATUS_OK);
}
