void
ast(struct trapframe *tf)
{
struct proc *p = curproc;;
#ifdef acorn26
/* Enable interrupts if they were enabled before the trap. */
if ((tf->tf_r15 & R15_IRQ_DISABLE) == 0)
int_on();
#else
/* Interrupts were restored by exception_exit. */
#endif
uvmexp.traps++;
uvmexp.softs++;
#ifdef DEBUG
if (p == NULL)
panic("ast: no curproc!");
if (&p->p_addr->u_pcb == 0)
panic("ast: no pcb!");
#endif
if (p->p_flag & P_OWEUPC) {
p->p_flag &= ~P_OWEUPC;
ADDUPROF(p);
}
/* Allow a forced task switch. */
if (want_resched)
preempt(0);
userret(p, tf->tf_pc, p->p_sticks); /* XXX */
}
/*
* Handle asynchronous software traps.
*/
void
ast(struct trapframe *frame)
{
struct cpu_info *ci = curcpu();
struct proc *p = ci->ci_curproc;
uvmexp.softs++;
p->p_md.md_astpending = 0;
if (p->p_flag & P_OWEUPC) {
KERNEL_LOCK();
ADDUPROF(p);
KERNEL_UNLOCK();
}
if (ci->ci_want_resched)
preempt(NULL);
userret(p);
}
/*
* Handle an AST for the current process.
*/
void
ast()
{
struct cpu_info *ci = curcpu();
struct proc *p = ci->ci_curproc;
uvmexp.softs++;
if (p->p_md.md_astpending == 0)
panic("unexpected ast p %p astpending %p\n", p, &p->p_md.md_astpending);
p->p_md.md_astpending = 0;
if (p->p_flag & P_OWEUPC) {
ADDUPROF(p);
}
if (ci->ci_want_resched)
preempt(NULL);
userret(p);
}
/*
* Define the code needed before returning to user mode, for
* trap, mem_access_fault, and syscall.
*/
static inline void
userret(struct proc *p, int pc, u_quad_t oticks)
{
int sig;
/* take pending signals */
while ((sig = CURSIG(p)) != 0)
psig(sig);
p->p_pri = p->p_usrpri;
if (want_ast) {
want_ast = 0;
if (p->p_flag & SOWEUPC) {
p->p_flag &= ~SOWEUPC;
ADDUPROF(p);
}
}
if (want_resched) {
/*
* Since we are curproc, a clock interrupt could
* change our priority without changing run queues
* (the running process is not kept on a run queue).
* If this happened after we setrq ourselves but
* before we swtch()'ed, we might not be on the queue
* indicated by our priority.
*/
(void) splstatclock();
setrq(p);
p->p_stats->p_ru.ru_nivcsw++;
swtch();
(void) spl0();
while ((sig = CURSIG(p)) != 0)
psig(sig);
}
/*
* If profiling, charge recent system time to the trapped pc.
*/
if (p->p_flag & SPROFIL)
addupc_task(p, pc, (int)(p->p_sticks - oticks));
curpri = p->p_pri;
}
/*
* Define the code needed before returning to user mode, for
* trap, mem_access_fault, and syscall.
*/
static inline void
userret(struct proc *p, int pc, u_quad_t oticks)
{
int sig;
/* take pending signals */
while ((sig = CURSIG(p)) != 0)
postsig(sig);
p->p_priority = p->p_usrpri;
if (want_ast) {
want_ast = 0;
if (p->p_flag & P_OWEUPC) {
p->p_flag &= ~P_OWEUPC;
ADDUPROF(p);
}
}
if (want_resched) {
/*
* Since we are curproc, clock will normally just change
* our priority without moving us from one queue to another
* (since the running process is not on a queue.)
* If that happened after we put ourselves on the run queue
* but before we switched, we might not be on the queue
* indicated by our priority.
*/
(void) splstatclock();
setrunqueue(p);
p->p_stats->p_ru.ru_nivcsw++;
mi_switch();
(void) spl0();
while ((sig = CURSIG(p)) != 0)
postsig(sig);
}
/*
* If profiling, charge recent system time to the trapped pc.
*/
if (p->p_flag & P_PROFIL)
addupc_task(p, pc, (int)(p->p_sticks - oticks));
curpriority = p->p_priority;
}
void
ast(struct trapframe *tf)
{
struct lwp * const l = curlwp;
#ifdef acorn26
/* Enable interrupts if they were enabled before the trap. */
if ((tf->tf_r15 & R15_IRQ_DISABLE) == 0)
int_on();
#else
/* Interrupts were restored by exception_exit. */
#endif
#ifdef __PROG32
KASSERT(VALID_R15_PSR(tf->tf_pc, tf->tf_spsr));
#endif
#ifdef __HAVE_PREEMPTION
kpreempt_disable();
#endif
struct cpu_info * const ci = curcpu();
ci->ci_data.cpu_ntrap++;
KDASSERT(ci->ci_cpl == IPL_NONE);
const int want_resched = ci->ci_want_resched;
#ifdef __HAVE_PREEMPTION
kpreempt_enable();
#endif
if (l->l_pflag & LP_OWEUPC) {
l->l_pflag &= ~LP_OWEUPC;
ADDUPROF(l);
}
/* Allow a forced task switch. */
if (want_resched)
preempt();
userret(l);
}
void
userret(struct proc *p, register_t pc, u_quad_t oticks)
{
int sig;
/* take pending signals */
while ((sig = CURSIG(p)) != 0)
postsig(sig);
p->p_priority = p->p_usrpri;
if (astpending) {
astpending = 0;
if (p->p_flag & P_OWEUPC) {
ADDUPROF(p);
}
}
if (want_resched) {
/*
* We're being preempted.
*/
preempt(NULL);
while ((sig = CURSIG(p)) != 0)
postsig(sig);
}
/*
* If profiling, charge recent system time to the trapped pc.
*/
if (p->p_flag & P_PROFIL) {
extern int psratio;
addupc_task(p, pc, (int)(p->p_sticks - oticks) * psratio);
}
p->p_cpu->ci_schedstate.spc_curpriority = p->p_priority;
}
/*ARGSUSED*/
void
trap(struct frame *fp, int type, unsigned code, unsigned v)
{
extern char fubail[], subail[];
struct lwp *l;
struct proc *p;
struct pcb *pcb;
void *onfault;
ksiginfo_t ksi;
int s;
int rv;
u_quad_t sticks = 0 /* XXX initialiser works around compiler bug */;
static int panicking __diagused;
curcpu()->ci_data.cpu_ntrap++;
l = curlwp;
p = l->l_proc;
pcb = lwp_getpcb(l);
KSI_INIT_TRAP(&ksi);
ksi.ksi_trap = type & ~T_USER;
if (USERMODE(fp->f_sr)) {
type |= T_USER;
sticks = p->p_sticks;
l->l_md.md_regs = fp->f_regs;
LWP_CACHE_CREDS(l, p);
}
switch (type) {
default:
dopanic:
/*
* Let the kernel debugger see the trap frame that
* caused us to panic. This is a convenience so
* one can see registers at the point of failure.
*/
s = splhigh();
panicking = 1;
printf("trap type %d, code = 0x%x, v = 0x%x\n", type, code, v);
printf("%s program counter = 0x%x\n",
(type & T_USER) ? "user" : "kernel", fp->f_pc);
#ifdef KGDB
/* If connected, step or cont returns 1 */
if (kgdb_trap(type, (db_regs_t *)fp))
goto kgdb_cont;
#endif
#ifdef DDB
(void)kdb_trap(type, (db_regs_t *)fp);
#endif
#ifdef KGDB
kgdb_cont:
#endif
splx(s);
if (panicstr) {
printf("trap during panic!\n");
#ifdef DEBUG
/* XXX should be a machine-dependent hook */
printf("(press a key)\n"); (void)cngetc();
#endif
}
regdump((struct trapframe *)fp, 128);
type &= ~T_USER;
if ((u_int)type < trap_types)
panic(trap_type[type]);
panic("trap");
case T_BUSERR: /* kernel bus error */
onfault = pcb->pcb_onfault;
if (onfault == NULL)
goto dopanic;
rv = EFAULT;
/* FALLTHROUGH */
copyfault:
/*
* If we have arranged to catch this fault in any of the
* copy to/from user space routines, set PC to return to
* indicated location and set flag informing buserror code
* that it may need to clean up stack frame.
*/
fp->f_stackadj = exframesize[fp->f_format];
fp->f_format = fp->f_vector = 0;
fp->f_pc = (int)onfault;
fp->f_regs[D0] = rv;
return;
case T_BUSERR|T_USER: /* bus error */
case T_ADDRERR|T_USER: /* address error */
ksi.ksi_addr = (void *)v;
ksi.ksi_signo = SIGBUS;
ksi.ksi_code = (type == (T_BUSERR|T_USER)) ?
BUS_OBJERR : BUS_ADRERR;
break;
case T_COPERR: /* kernel coprocessor violation */
case T_FMTERR|T_USER: /* do all RTE errors come in as T_USER? */
case T_FMTERR: /* ...just in case... */
/*
* The user has most likely trashed the RTE or FP state info
* in the stack frame of a signal handler.
*/
printf("pid %d: kernel %s exception\n", p->p_pid,
type==T_COPERR ? "coprocessor" : "format");
type |= T_USER;
mutex_enter(p->p_lock);
SIGACTION(p, SIGILL).sa_handler = SIG_DFL;
sigdelset(&p->p_sigctx.ps_sigignore, SIGILL);
sigdelset(&p->p_sigctx.ps_sigcatch, SIGILL);
sigdelset(&l->l_sigmask, SIGILL);
mutex_exit(p->p_lock);
ksi.ksi_signo = SIGILL;
ksi.ksi_addr = (void *)(int)fp->f_format;
/* XXX was ILL_RESAD_FAULT */
ksi.ksi_code = (type == T_COPERR) ?
ILL_COPROC : ILL_ILLOPC;
break;
case T_COPERR|T_USER: /* user coprocessor violation */
/* What is a proper response here? */
ksi.ksi_signo = SIGFPE;
ksi.ksi_code = FPE_FLTINV;
break;
case T_FPERR|T_USER: /* 68881 exceptions */
/*
* We pass along the 68881 status register which locore stashed
* in code for us.
*/
ksi.ksi_signo = SIGFPE;
ksi.ksi_code = fpsr2siginfocode(code);
break;
#ifdef M68040
case T_FPEMULI|T_USER: /* unimplemented FP instruction */
case T_FPEMULD|T_USER: /* unimplemented FP data type */
/* XXX need to FSAVE */
printf("pid %d(%s): unimplemented FP %s at %x (EA %x)\n",
p->p_pid, p->p_comm,
fp->f_format == 2 ? "instruction" : "data type",
fp->f_pc, fp->f_fmt2.f_iaddr);
/* XXX need to FRESTORE */
ksi.ksi_signo = SIGFPE;
ksi.ksi_code = FPE_FLTINV;
break;
#endif
case T_ILLINST|T_USER: /* illegal instruction fault */
case T_PRIVINST|T_USER: /* privileged instruction fault */
ksi.ksi_addr = (void *)(int)fp->f_format;
/* XXX was ILL_PRIVIN_FAULT */
ksi.ksi_signo = SIGILL;
ksi.ksi_code = (type == (T_PRIVINST|T_USER)) ?
ILL_PRVOPC : ILL_ILLOPC;
break;
case T_ZERODIV|T_USER: /* Divide by zero */
ksi.ksi_addr = (void *)(int)fp->f_format;
/* XXX was FPE_INTDIV_TRAP */
ksi.ksi_signo = SIGFPE;
ksi.ksi_code = FPE_FLTDIV;
break;
case T_CHKINST|T_USER: /* CHK instruction trap */
ksi.ksi_addr = (void *)(int)fp->f_format;
/* XXX was FPE_SUBRNG_TRAP */
ksi.ksi_signo = SIGFPE;
break;
case T_TRAPVINST|T_USER: /* TRAPV instruction trap */
ksi.ksi_addr = (void *)(int)fp->f_format;
/* XXX was FPE_INTOVF_TRAP */
ksi.ksi_signo = SIGFPE;
break;
/*
* XXX: Trace traps are a nightmare.
*
* HP-UX uses trap #1 for breakpoints,
* NetBSD/m68k uses trap #2,
* SUN 3.x uses trap #15,
* DDB and KGDB uses trap #15 (for kernel breakpoints;
* handled elsewhere).
*
* NetBSD and HP-UX traps both get mapped by locore.s into T_TRACE.
* SUN 3.x traps get passed through as T_TRAP15 and are not really
* supported yet.
*
* XXX: We should never get kernel-mode T_TRAP15
* XXX: because locore.s now gives them special treatment.
*/
case T_TRAP15: /* kernel breakpoint */
#ifdef DEBUG
printf("unexpected kernel trace trap, type = %d\n", type);
printf("program counter = 0x%x\n", fp->f_pc);
#endif
fp->f_sr &= ~PSL_T;
return;
case T_TRACE|T_USER: /* user trace trap */
#ifdef COMPAT_SUNOS
/*
* SunOS uses Trap #2 for a "CPU cache flush".
* Just flush the on-chip caches and return.
*/
if (p->p_emul == &emul_sunos) {
ICIA();
DCIU();
return;
}
#endif
/* FALLTHROUGH */
case T_TRACE: /* tracing a trap instruction */
case T_TRAP15|T_USER: /* SUN user trace trap */
fp->f_sr &= ~PSL_T;
ksi.ksi_signo = SIGTRAP;
break;
case T_ASTFLT: /* system async trap, cannot happen */
goto dopanic;
case T_ASTFLT|T_USER: /* user async trap */
astpending = 0;
/*
* We check for software interrupts first. This is because
* they are at a higher level than ASTs, and on a VAX would
* interrupt the AST. We assume that if we are processing
* an AST that we must be at IPL0 so we don't bother to
* check. Note that we ensure that we are at least at SIR
* IPL while processing the SIR.
*/
spl1();
/* fall into... */
case T_SSIR: /* software interrupt */
case T_SSIR|T_USER:
/*
* If this was not an AST trap, we are all done.
*/
if (type != (T_ASTFLT|T_USER)) {
curcpu()->ci_data.cpu_ntrap--;
return;
}
spl0();
if (l->l_pflag & LP_OWEUPC) {
l->l_pflag &= ~LP_OWEUPC;
ADDUPROF(l);
}
if (curcpu()->ci_want_resched)
preempt();
goto out;
case T_MMUFLT: /* kernel mode page fault */
/*
* If we were doing profiling ticks or other user mode
* stuff from interrupt code, Just Say No.
*/
onfault = pcb->pcb_onfault;
if (onfault == fubail || onfault == subail) {
rv = EFAULT;
goto copyfault;
}
/* fall into ... */
case T_MMUFLT|T_USER: /* page fault */
{
vaddr_t va;
struct vmspace *vm = p->p_vmspace;
struct vm_map *map;
vm_prot_t ftype;
extern struct vm_map *kernel_map;
onfault = pcb->pcb_onfault;
#ifdef DEBUG
if ((mmudebug & MDB_WBFOLLOW) || MDB_ISPID(p->p_pid))
printf("trap: T_MMUFLT pid=%d, code=%x, v=%x, pc=%x, sr=%x\n",
p->p_pid, code, v, fp->f_pc, fp->f_sr);
#endif
/*
* It is only a kernel address space fault iff:
* 1. (type & T_USER) == 0 and
* 2. pcb_onfault not set or
* 3. pcb_onfault set but supervisor space data fault
* The last can occur during an exec() copyin where the
* argument space is lazy-allocated.
*/
if ((type & T_USER) == 0 && (onfault == NULL || KDFAULT(code)))
map = kernel_map;
else {
map = vm ? &vm->vm_map : kernel_map;
}
if (WRFAULT(code))
ftype = VM_PROT_WRITE;
else
ftype = VM_PROT_READ;
va = trunc_page((vaddr_t)v);
if (map == kernel_map && va == 0) {
printf("trap: bad kernel %s access at 0x%x\n",
(ftype & VM_PROT_WRITE) ? "read/write" :
"read", v);
goto dopanic;
}
#ifdef DIAGNOSTIC
if (interrupt_depth && !panicking) {
printf("trap: calling uvm_fault() from interrupt!\n");
goto dopanic;
}
#endif
pcb->pcb_onfault = NULL;
rv = uvm_fault(map, va, ftype);
pcb->pcb_onfault = onfault;
#ifdef DEBUG
if (rv && MDB_ISPID(p->p_pid))
printf("uvm_fault(%p, 0x%lx, 0x%x) -> 0x%x\n",
map, va, ftype, rv);
#endif
/*
* If this was a stack access we keep track of the maximum
* accessed stack size. Also, if vm_fault gets a protection
* failure it is due to accessing the stack region outside
* the current limit and we need to reflect that as an access
* error.
*/
if (rv == 0) {
if (map != kernel_map && (void *)va >= vm->vm_maxsaddr)
uvm_grow(p, va);
if (type == T_MMUFLT) {
if (ucas_ras_check(&fp->F_t)) {
return;
}
#ifdef M68040
if (cputype == CPU_68040)
(void) writeback(fp, 1);
#endif
return;
}
goto out;
}
if (rv == EACCES) {
ksi.ksi_code = SEGV_ACCERR;
rv = EFAULT;
} else
ksi.ksi_code = SEGV_MAPERR;
if (type == T_MMUFLT) {
if (onfault)
goto copyfault;
printf("uvm_fault(%p, 0x%lx, 0x%x) -> 0x%x\n",
map, va, ftype, rv);
printf(" type %x, code [mmu,,ssw]: %x\n",
type, code);
goto dopanic;
}
ksi.ksi_addr = (void *)v;
switch (rv) {
case ENOMEM:
printf("UVM: pid %d (%s), uid %d killed: out of swap\n",
p->p_pid, p->p_comm,
l->l_cred ?
kauth_cred_geteuid(l->l_cred) : -1);
ksi.ksi_signo = SIGKILL;
break;
case EINVAL:
ksi.ksi_signo = SIGBUS;
ksi.ksi_code = BUS_ADRERR;
break;
case EACCES:
ksi.ksi_signo = SIGSEGV;
ksi.ksi_code = SEGV_ACCERR;
break;
default:
ksi.ksi_signo = SIGSEGV;
ksi.ksi_code = SEGV_MAPERR;
break;
}
break;
}
}
trapsignal(l, &ksi);
if ((type & T_USER) == 0)
return;
out:
userret(l, fp, sticks, v, 1);
}
/*ARGSUSED*/
void
trap(struct trapframe *frame)
{
struct proc *p = curproc;
int type = (int)frame->tf_trapno;
struct pcb *pcb;
extern char doreti_iret[], resume_iret[];
caddr_t onfault;
int error;
uint64_t cr2;
union sigval sv;
uvmexp.traps++;
pcb = (p != NULL && p->p_addr != NULL) ? &p->p_addr->u_pcb : NULL;
#ifdef DEBUG
if (trapdebug) {
printf("trap %d code %lx rip %lx cs %lx rflags %lx cr2 %lx "
"cpl %x\n",
type, frame->tf_err, frame->tf_rip, frame->tf_cs,
frame->tf_rflags, rcr2(), curcpu()->ci_ilevel);
printf("curproc %p\n", curproc);
if (curproc)
printf("pid %d\n", p->p_pid);
}
#endif
if (!KERNELMODE(frame->tf_cs, frame->tf_rflags)) {
type |= T_USER;
p->p_md.md_regs = frame;
}
switch (type) {
default:
we_re_toast:
#ifdef KGDB
if (kgdb_trap(type, frame))
return;
else {
/*
* If this is a breakpoint, don't panic
* if we're not connected.
*/
if (type == T_BPTFLT) {
printf("kgdb: ignored %s\n", trap_type[type]);
return;
}
}
#endif
#ifdef DDB
if (kdb_trap(type, 0, frame))
return;
#endif
if (frame->tf_trapno < trap_types)
printf("fatal %s", trap_type[frame->tf_trapno]);
else
printf("unknown trap %ld", (u_long)frame->tf_trapno);
printf(" in %s mode\n", (type & T_USER) ? "user" : "supervisor");
printf("trap type %d code %lx rip %lx cs %lx rflags %lx cr2 "
" %lx cpl %x rsp %lx\n",
type, frame->tf_err, (u_long)frame->tf_rip, frame->tf_cs,
frame->tf_rflags, rcr2(), curcpu()->ci_ilevel, frame->tf_rsp);
panic("trap type %d, code=%lx, pc=%lx",
type, frame->tf_err, frame->tf_rip);
/*NOTREACHED*/
case T_PROTFLT:
case T_SEGNPFLT:
case T_ALIGNFLT:
case T_TSSFLT:
if (p == NULL)
goto we_re_toast;
/* Check for copyin/copyout fault. */
if (pcb->pcb_onfault != 0) {
error = EFAULT;
copyfault:
frame->tf_rip = (u_int64_t)pcb->pcb_onfault;
frame->tf_rax = error;
return;
}
/*
* Check for failure during return to user mode.
* We do this by looking at the address of the
* instruction that faulted.
*/
if (frame->tf_rip == (u_int64_t)doreti_iret) {
frame->tf_rip = (u_int64_t)resume_iret;
return;
}
goto we_re_toast;
case T_PROTFLT|T_USER: /* protection fault */
case T_TSSFLT|T_USER:
case T_SEGNPFLT|T_USER:
case T_STKFLT|T_USER:
case T_NMI|T_USER:
#ifdef TRAP_SIGDEBUG
printf("pid %d (%s): BUS at rip %lx addr %lx\n",
p->p_pid, p->p_comm, frame->tf_rip, rcr2());
frame_dump(frame);
#endif
sv.sival_ptr = (void *)frame->tf_rip;
KERNEL_LOCK();
trapsignal(p, SIGBUS, type & ~T_USER, BUS_OBJERR, sv);
KERNEL_UNLOCK();
goto out;
case T_ALIGNFLT|T_USER:
sv.sival_ptr = (void *)frame->tf_rip;
KERNEL_LOCK();
trapsignal(p, SIGBUS, type & ~T_USER, BUS_ADRALN, sv);
KERNEL_UNLOCK();
goto out;
case T_PRIVINFLT|T_USER: /* privileged instruction fault */
sv.sival_ptr = (void *)frame->tf_rip;
KERNEL_LOCK();
trapsignal(p, SIGILL, type & ~T_USER, ILL_PRVOPC, sv);
KERNEL_UNLOCK();
goto out;
case T_FPOPFLT|T_USER: /* coprocessor operand fault */
#ifdef TRAP_SIGDEBUG
printf("pid %d (%s): ILL at rip %lx addr %lx\n",
p->p_pid, p->p_comm, frame->tf_rip, rcr2());
frame_dump(frame);
#endif
sv.sival_ptr = (void *)frame->tf_rip;
KERNEL_LOCK();
trapsignal(p, SIGILL, type & ~T_USER, ILL_COPROC, sv);
KERNEL_UNLOCK();
goto out;
case T_ASTFLT|T_USER: /* Allow process switch */
uvmexp.softs++;
if (p->p_flag & P_OWEUPC) {
KERNEL_LOCK();
ADDUPROF(p);
KERNEL_UNLOCK();
}
/* Allow a forced task switch. */
if (curcpu()->ci_want_resched)
preempt(NULL);
goto out;
case T_BOUND|T_USER:
sv.sival_ptr = (void *)frame->tf_rip;
KERNEL_LOCK();
trapsignal(p, SIGFPE, type &~ T_USER, FPE_FLTSUB, sv);
KERNEL_UNLOCK();
goto out;
case T_OFLOW|T_USER:
sv.sival_ptr = (void *)frame->tf_rip;
KERNEL_LOCK();
trapsignal(p, SIGFPE, type &~ T_USER, FPE_INTOVF, sv);
KERNEL_UNLOCK();
goto out;
case T_DIVIDE|T_USER:
sv.sival_ptr = (void *)frame->tf_rip;
KERNEL_LOCK();
trapsignal(p, SIGFPE, type &~ T_USER, FPE_INTDIV, sv);
KERNEL_UNLOCK();
goto out;
case T_ARITHTRAP|T_USER:
case T_XMM|T_USER:
fputrap(frame);
goto out;
case T_PAGEFLT: /* allow page faults in kernel mode */
if (p == NULL)
goto we_re_toast;
cr2 = rcr2();
KERNEL_LOCK();
goto faultcommon;
case T_PAGEFLT|T_USER: { /* page fault */
vaddr_t va, fa;
struct vmspace *vm;
struct vm_map *map;
vm_prot_t ftype;
extern struct vm_map *kernel_map;
cr2 = rcr2();
KERNEL_LOCK();
faultcommon:
vm = p->p_vmspace;
if (vm == NULL)
goto we_re_toast;
fa = cr2;
va = trunc_page((vaddr_t)cr2);
/*
* It is only a kernel address space fault iff:
* 1. (type & T_USER) == 0 and
* 2. pcb_onfault not set or
* 3. pcb_onfault set but supervisor space fault
* The last can occur during an exec() copyin where the
* argument space is lazy-allocated.
*/
if (type == T_PAGEFLT && va >= VM_MIN_KERNEL_ADDRESS)
map = kernel_map;
else
map = &vm->vm_map;
if (frame->tf_err & PGEX_W)
ftype = VM_PROT_WRITE;
else if (frame->tf_err & PGEX_I)
ftype = VM_PROT_EXECUTE;
else
ftype = VM_PROT_READ;
#ifdef DIAGNOSTIC
if (map == kernel_map && va == 0) {
printf("trap: bad kernel access at %lx\n", va);
goto we_re_toast;
}
#endif
/* Fault the original page in. */
onfault = pcb->pcb_onfault;
pcb->pcb_onfault = NULL;
error = uvm_fault(map, va, frame->tf_err & PGEX_P?
VM_FAULT_PROTECT : VM_FAULT_INVALID, ftype);
pcb->pcb_onfault = onfault;
if (error == 0) {
if (map != kernel_map)
uvm_grow(p, va);
if (type == T_PAGEFLT) {
KERNEL_UNLOCK();
return;
}
KERNEL_UNLOCK();
goto out;
}
if (error == EACCES) {
error = EFAULT;
}
if (type == T_PAGEFLT) {
if (pcb->pcb_onfault != 0) {
KERNEL_UNLOCK();
goto copyfault;
}
printf("uvm_fault(%p, 0x%lx, 0, %d) -> %x\n",
map, va, ftype, error);
goto we_re_toast;
}
if (error == ENOMEM) {
printf("UVM: pid %d (%s), uid %d killed: out of swap\n",
p->p_pid, p->p_comm,
p->p_cred && p->p_ucred ?
(int)p->p_ucred->cr_uid : -1);
sv.sival_ptr = (void *)fa;
trapsignal(p, SIGKILL, T_PAGEFLT, SEGV_MAPERR, sv);
} else {
#ifdef TRAP_SIGDEBUG
printf("pid %d (%s): SEGV at rip %lx addr %lx\n",
p->p_pid, p->p_comm, frame->tf_rip, va);
frame_dump(frame);
#endif
sv.sival_ptr = (void *)fa;
trapsignal(p, SIGSEGV, T_PAGEFLT, SEGV_MAPERR, sv);
}
KERNEL_UNLOCK();
break;
}
case T_TRCTRAP:
goto we_re_toast;
case T_BPTFLT|T_USER: /* bpt instruction fault */
case T_TRCTRAP|T_USER: /* trace trap */
#ifdef MATH_EMULATE
trace:
#endif
KERNEL_LOCK();
trapsignal(p, SIGTRAP, type &~ T_USER, TRAP_BRKPT, sv);
KERNEL_UNLOCK();
break;
#if NISA > 0
case T_NMI:
#if defined(KGDB) || defined(DDB)
/* NMI can be hooked up to a pushbutton for debugging */
printf ("NMI ... going to debugger\n");
#ifdef KGDB
if (kgdb_trap(type, frame))
return;
#endif
#ifdef DDB
if (kdb_trap(type, 0, frame))
return;
#endif
#endif /* KGDB || DDB */
/* machine/parity/power fail/"kitchen sink" faults */
if (x86_nmi() != 0)
goto we_re_toast;
else
return;
#endif /* NISA > 0 */
}
if ((type & T_USER) == 0)
return;
out:
userret(p);
}
/*
* trap(frame): exception, fault, and trap interface to BSD kernel.
*
* This common code is called from assembly language IDT gate entry routines
* that prepare a suitable stack frame, and restore this frame after the
* exception has been processed. Note that the effect is as if the arguments
* were passed call by reference.
*/
void
trap(struct trapframe *frame)
{
struct lwp *l = curlwp;
struct proc *p;
struct pcb *pcb;
extern char fusubail[], kcopy_fault[], return_address_fault[],
IDTVEC(osyscall)[];
struct trapframe *vframe;
ksiginfo_t ksi;
void *onfault;
int type, error;
uint32_t cr2;
bool pfail;
if (__predict_true(l != NULL)) {
pcb = lwp_getpcb(l);
p = l->l_proc;
} else {
/*
* this can happen eg. on break points in early on boot.
*/
pcb = NULL;
p = NULL;
}
type = frame->tf_trapno;
#ifdef DEBUG
if (trapdebug) {
trap_print(frame, l);
}
#endif
if (type != T_NMI &&
!KERNELMODE(frame->tf_cs, frame->tf_eflags)) {
type |= T_USER;
l->l_md.md_regs = frame;
pcb->pcb_cr2 = 0;
LWP_CACHE_CREDS(l, p);
}
#ifdef KDTRACE_HOOKS
/*
* A trap can occur while DTrace executes a probe. Before
* executing the probe, DTrace blocks re-scheduling and sets
* a flag in its per-cpu flags to indicate that it doesn't
* want to fault. On returning from the the probe, the no-fault
* flag is cleared and finally re-scheduling is enabled.
*
* If the DTrace kernel module has registered a trap handler,
* call it and if it returns non-zero, assume that it has
* handled the trap and modified the trap frame so that this
* function can return normally.
*/
if ((type == T_PROTFLT || type == T_PAGEFLT) &&
dtrace_trap_func != NULL) {
if ((*dtrace_trap_func)(frame, type)) {
return;
}
}
#endif
switch (type) {
case T_ASTFLT:
/*FALLTHROUGH*/
default:
we_re_toast:
if (type == T_TRCTRAP)
check_dr0();
else
trap_print(frame, l);
if (kdb_trap(type, 0, frame))
return;
if (kgdb_trap(type, frame))
return;
/*
* If this is a breakpoint, don't panic if we're not connected.
*/
if (type == T_BPTFLT && kgdb_disconnected()) {
printf("kgdb: ignored %s\n", trap_type[type]);
return;
}
panic("trap");
/*NOTREACHED*/
case T_PROTFLT:
case T_SEGNPFLT:
case T_ALIGNFLT:
case T_TSSFLT:
if (p == NULL)
goto we_re_toast;
/* Check for copyin/copyout fault. */
onfault = onfault_handler(pcb, frame);
if (onfault != NULL) {
copyefault:
error = EFAULT;
copyfault:
frame->tf_eip = (uintptr_t)onfault;
frame->tf_eax = error;
return;
}
/*
* Check for failure during return to user mode.
* This can happen loading invalid values into the segment
* registers, or during the 'iret' itself.
*
* We do this by looking at the instruction we faulted on.
* The specific instructions we recognize only happen when
* returning from a trap, syscall, or interrupt.
*/
kernelfault:
KSI_INIT_TRAP(&ksi);
ksi.ksi_signo = SIGSEGV;
ksi.ksi_code = SEGV_ACCERR;
ksi.ksi_trap = type;
switch (*(u_char *)frame->tf_eip) {
case 0xcf: /* iret */
/*
* The 'iret' instruction faulted, so we have the
* 'user' registers saved after the kernel %eip:%cs:%fl
* of the 'iret' and below that the user %eip:%cs:%fl
* the 'iret' was processing.
* We must delete the 3 words of kernel return address
* from the stack to generate a normal stack frame
* (eg for sending a SIGSEGV).
*/
vframe = (void *)((int *)frame + 3);
if (KERNELMODE(vframe->tf_cs, vframe->tf_eflags))
goto we_re_toast;
memmove(vframe, frame,
offsetof(struct trapframe, tf_eip));
/* Set the faulting address to the user %eip */
ksi.ksi_addr = (void *)vframe->tf_eip;
break;
case 0x8e:
switch (*(uint32_t *)frame->tf_eip) {
case 0x8e242c8e: /* mov (%esp,%gs), then */
case 0x0424648e: /* mov 0x4(%esp),%fs */
case 0x0824448e: /* mov 0x8(%esp),%es */
case 0x0c245c8e: /* mov 0xc(%esp),%ds */
break;
default:
goto we_re_toast;
}
/*
* We faulted loading one if the user segment registers.
* The stack frame containing the user registers is
* still valid and is just below the %eip:%cs:%fl of
* the kernel fault frame.
*/
vframe = (void *)(&frame->tf_eflags + 1);
if (KERNELMODE(vframe->tf_cs, vframe->tf_eflags))
goto we_re_toast;
/* There is no valid address for the fault */
break;
default:
goto we_re_toast;
}
/*
* We might have faulted trying to execute the
* trampoline for a local (nested) signal handler.
* Only generate SIGSEGV if the user %cs isn't changed.
* (This is only strictly necessary in the 'iret' case.)
*/
if (!pmap_exec_fixup(&p->p_vmspace->vm_map, vframe, pcb)) {
/* Save outer frame for any signal return */
l->l_md.md_regs = vframe;
(*p->p_emul->e_trapsignal)(l, &ksi);
}
/* Return to user by reloading the user frame */
trap_return_fault_return(vframe);
/* NOTREACHED */
case T_PROTFLT|T_USER: /* protection fault */
case T_TSSFLT|T_USER:
case T_SEGNPFLT|T_USER:
case T_STKFLT|T_USER:
case T_ALIGNFLT|T_USER:
KSI_INIT_TRAP(&ksi);
ksi.ksi_addr = (void *)rcr2();
switch (type) {
case T_SEGNPFLT|T_USER:
case T_STKFLT|T_USER:
ksi.ksi_signo = SIGBUS;
ksi.ksi_code = BUS_ADRERR;
break;
case T_TSSFLT|T_USER:
ksi.ksi_signo = SIGBUS;
ksi.ksi_code = BUS_OBJERR;
break;
case T_ALIGNFLT|T_USER:
ksi.ksi_signo = SIGBUS;
ksi.ksi_code = BUS_ADRALN;
break;
case T_PROTFLT|T_USER:
#ifdef VM86
if (frame->tf_eflags & PSL_VM) {
vm86_gpfault(l, type & ~T_USER);
goto out;
}
#endif
/*
* If pmap_exec_fixup does something,
* let's retry the trap.
*/
if (pmap_exec_fixup(&p->p_vmspace->vm_map, frame, pcb)){
goto out;
}
ksi.ksi_signo = SIGSEGV;
ksi.ksi_code = SEGV_ACCERR;
break;
default:
KASSERT(0);
break;
}
goto trapsignal;
case T_PRIVINFLT|T_USER: /* privileged instruction fault */
case T_FPOPFLT|T_USER: /* coprocessor operand fault */
KSI_INIT_TRAP(&ksi);
ksi.ksi_signo = SIGILL;
ksi.ksi_addr = (void *) frame->tf_eip;
switch (type) {
case T_PRIVINFLT|T_USER:
ksi.ksi_code = ILL_PRVOPC;
break;
case T_FPOPFLT|T_USER:
ksi.ksi_code = ILL_COPROC;
break;
default:
ksi.ksi_code = 0;
break;
}
goto trapsignal;
case T_ASTFLT|T_USER:
/* Allow process switch. */
//curcpu()->ci_data.cpu_nast++;
if (l->l_pflag & LP_OWEUPC) {
l->l_pflag &= ~LP_OWEUPC;
ADDUPROF(l);
}
/* Allow a forced task switch. */
if (curcpu()->ci_want_resched) {
preempt();
}
goto out;
case T_BOUND|T_USER:
case T_OFLOW|T_USER:
case T_DIVIDE|T_USER:
KSI_INIT_TRAP(&ksi);
ksi.ksi_signo = SIGFPE;
ksi.ksi_addr = (void *)frame->tf_eip;
switch (type) {
case T_BOUND|T_USER:
ksi.ksi_code = FPE_FLTSUB;
break;
case T_OFLOW|T_USER:
ksi.ksi_code = FPE_INTOVF;
break;
case T_DIVIDE|T_USER:
ksi.ksi_code = FPE_INTDIV;
break;
default:
ksi.ksi_code = 0;
break;
}
goto trapsignal;
case T_PAGEFLT:
/* Allow page faults in kernel mode. */
if (__predict_false(l == NULL))
goto we_re_toast;
/*
* fusubail is used by [fs]uswintr() to prevent page faulting
* from inside the profiling interrupt.
*/
onfault = pcb->pcb_onfault;
if (onfault == fusubail || onfault == return_address_fault) {
goto copyefault;
}
if (cpu_intr_p() || (l->l_pflag & LP_INTR) != 0) {
goto we_re_toast;
}
cr2 = rcr2();
goto faultcommon;
case T_PAGEFLT|T_USER: { /* page fault */
register vaddr_t va;
register struct vmspace *vm;
register struct vm_map *map;
vm_prot_t ftype;
extern struct vm_map *kernel_map;
cr2 = rcr2();
faultcommon:
vm = p->p_vmspace;
if (__predict_false(vm == NULL)) {
goto we_re_toast;
}
pcb->pcb_cr2 = cr2;
va = trunc_page((vaddr_t)cr2);
/*
* It is only a kernel address space fault iff:
* 1. (type & T_USER) == 0 and
* 2. pcb_onfault not set or
* 3. pcb_onfault set but supervisor space fault
* The last can occur during an exec() copyin where the
* argument space is lazy-allocated.
*/
if (type == T_PAGEFLT && va >= KERNBASE)
map = kernel_map;
else
map = &vm->vm_map;
if (frame->tf_err & PGEX_W)
ftype = VM_PROT_WRITE;
else if (frame->tf_err & PGEX_X)
ftype = VM_PROT_EXECUTE;
else
ftype = VM_PROT_READ;
#ifdef DIAGNOSTIC
if (map == kernel_map && va == 0) {
printf("trap: bad kernel access at %lx\n", va);
goto we_re_toast;
}
#endif
/* Fault the original page in. */
onfault = pcb->pcb_onfault;
pcb->pcb_onfault = NULL;
error = uvm_fault(map, va, ftype);
pcb->pcb_onfault = onfault;
if (error == 0) {
if (map != kernel_map && (void *)va >= vm->vm_maxsaddr)
uvm_grow(p, va);
pfail = false;
while (type == T_PAGEFLT) {
/*
* we need to switch pmap now if we're in
* the middle of copyin/out.
*
* but we don't need to do so for kcopy as
* it never touch userspace.
*/
kpreempt_disable();
if (curcpu()->ci_want_pmapload) {
onfault = onfault_handler(pcb, frame);
if (onfault != kcopy_fault) {
pmap_load();
}
}
/*
* We need to keep the pmap loaded and
* so avoid being preempted until back
* into the copy functions. Disable
* interrupts at the hardware level before
* re-enabling preemption. Interrupts
* will be re-enabled by 'iret' when
* returning back out of the trap stub.
* They'll only be re-enabled when the
* program counter is once again in
* the copy functions, and so visible
* to cpu_kpreempt_exit().
*/
#ifndef XEN
x86_disable_intr();
#endif
l->l_nopreempt--;
if (l->l_nopreempt > 0 || !l->l_dopreempt ||
pfail) {
return;
}
#ifndef XEN
x86_enable_intr();
#endif
/*
* If preemption fails for some reason,
* don't retry it. The conditions won't
* change under our nose.
*/
pfail = kpreempt(0);
}
goto out;
}
if (type == T_PAGEFLT) {
onfault = onfault_handler(pcb, frame);
if (onfault != NULL)
goto copyfault;
printf("uvm_fault(%p, %#lx, %d) -> %#x\n",
map, va, ftype, error);
goto kernelfault;
}
KSI_INIT_TRAP(&ksi);
ksi.ksi_trap = type & ~T_USER;
ksi.ksi_addr = (void *)cr2;
switch (error) {
case EINVAL:
ksi.ksi_signo = SIGBUS;
ksi.ksi_code = BUS_ADRERR;
break;
case EACCES:
ksi.ksi_signo = SIGSEGV;
ksi.ksi_code = SEGV_ACCERR;
error = EFAULT;
break;
case ENOMEM:
ksi.ksi_signo = SIGKILL;
printf("UVM: pid %d.%d (%s), uid %d killed: "
"out of swap\n", p->p_pid, l->l_lid, p->p_comm,
l->l_cred ? kauth_cred_geteuid(l->l_cred) : -1);
break;
default:
ksi.ksi_signo = SIGSEGV;
ksi.ksi_code = SEGV_MAPERR;
break;
}
#ifdef TRAP_SIGDEBUG
printf("pid %d.%d (%s): signal %d at eip %x addr %lx "
"error %d\n", p->p_pid, l->l_lid, p->p_comm, ksi.ksi_signo,
frame->tf_eip, va, error);
#endif
(*p->p_emul->e_trapsignal)(l, &ksi);
break;
}
case T_TRCTRAP:
/* Check whether they single-stepped into a lcall. */
if (frame->tf_eip == (int)IDTVEC(osyscall))
return;
if (frame->tf_eip == (int)IDTVEC(osyscall) + 1) {
frame->tf_eflags &= ~PSL_T;
return;
}
goto we_re_toast;
case T_BPTFLT|T_USER: /* bpt instruction fault */
case T_TRCTRAP|T_USER: /* trace trap */
/*
* Don't go single-stepping into a RAS.
*/
if (p->p_raslist == NULL ||
(ras_lookup(p, (void *)frame->tf_eip) == (void *)-1)) {
KSI_INIT_TRAP(&ksi);
ksi.ksi_signo = SIGTRAP;
ksi.ksi_trap = type & ~T_USER;
if (type == (T_BPTFLT|T_USER))
ksi.ksi_code = TRAP_BRKPT;
else
ksi.ksi_code = TRAP_TRACE;
ksi.ksi_addr = (void *)frame->tf_eip;
(*p->p_emul->e_trapsignal)(l, &ksi);
}
break;
case T_NMI:
if (nmi_dispatch(frame))
return;
/* NMI can be hooked up to a pushbutton for debugging */
if (kgdb_trap(type, frame))
return;
if (kdb_trap(type, 0, frame))
return;
/* machine/parity/power fail/"kitchen sink" faults */
#if NMCA > 0
mca_nmi();
#endif
x86_nmi();
}
if ((type & T_USER) == 0)
return;
out:
userret(l);
return;
trapsignal:
ksi.ksi_trap = type & ~T_USER;
(*p->p_emul->e_trapsignal)(l, &ksi);
userret(l);
}
void
m88110_trap(unsigned type, struct trapframe *frame)
{
struct proc *p;
u_quad_t sticks = 0;
struct vm_map *map;
vaddr_t va, pcb_onfault;
vm_prot_t ftype;
int fault_type;
u_long fault_code;
unsigned nss, fault_addr;
struct vmspace *vm;
union sigval sv;
int result;
#ifdef DDB
int s;
#endif
int sig = 0;
pt_entry_t *pte;
extern struct vm_map *kernel_map;
extern unsigned guarded_access_start;
extern unsigned guarded_access_end;
extern unsigned guarded_access_bad;
extern pt_entry_t *pmap_pte(pmap_t, vaddr_t);
uvmexp.traps++;
if ((p = curproc) == NULL)
p = &proc0;
if (USERMODE(frame->tf_epsr)) {
sticks = p->p_sticks;
type += T_USER;
p->p_md.md_tf = frame; /* for ptrace/signals */
}
fault_type = 0;
fault_code = 0;
fault_addr = frame->tf_exip & XIP_ADDR;
switch (type) {
default:
panictrap(frame->tf_vector, frame);
break;
/*NOTREACHED*/
case T_197_READ+T_USER:
case T_197_READ:
printf("DMMU read miss: Hardware Table Searches should be enabled!\n");
panictrap(frame->tf_vector, frame);
break;
/*NOTREACHED*/
case T_197_WRITE+T_USER:
case T_197_WRITE:
printf("DMMU write miss: Hardware Table Searches should be enabled!\n");
panictrap(frame->tf_vector, frame);
break;
/*NOTREACHED*/
case T_197_INST+T_USER:
case T_197_INST:
printf("IMMU miss: Hardware Table Searches should be enabled!\n");
panictrap(frame->tf_vector, frame);
break;
/*NOTREACHED*/
#ifdef DDB
case T_KDB_TRACE:
s = splhigh();
db_enable_interrupt();
ddb_break_trap(T_KDB_TRACE, (db_regs_t*)frame);
db_disable_interrupt();
splx(s);
return;
case T_KDB_BREAK:
s = splhigh();
db_enable_interrupt();
ddb_break_trap(T_KDB_BREAK, (db_regs_t*)frame);
db_disable_interrupt();
splx(s);
return;
case T_KDB_ENTRY:
s = splhigh();
db_enable_interrupt();
ddb_entry_trap(T_KDB_ENTRY, (db_regs_t*)frame);
db_disable_interrupt();
/* skip one instruction */
if (frame->tf_exip & 1)
frame->tf_exip = frame->tf_enip;
else
frame->tf_exip += 4;
splx(s);
return;
#if 0
case T_ILLFLT:
s = splhigh();
db_enable_interrupt();
ddb_error_trap(type == T_ILLFLT ? "unimplemented opcode" :
"error fault", (db_regs_t*)frame);
db_disable_interrupt();
splx(s);
return;
#endif /* 0 */
#endif /* DDB */
case T_ILLFLT:
printf("Unimplemented opcode!\n");
panictrap(frame->tf_vector, frame);
break;
case T_NON_MASK:
case T_NON_MASK+T_USER:
(*md.interrupt_func)(T_NON_MASK, frame);
return;
case T_INT:
case T_INT+T_USER:
(*md.interrupt_func)(T_INT, frame);
return;
case T_MISALGNFLT:
printf("kernel mode misaligned access exception @ 0x%08x\n",
frame->tf_exip);
panictrap(frame->tf_vector, frame);
break;
/*NOTREACHED*/
case T_INSTFLT:
/* kernel mode instruction access fault.
* Should never, never happen for a non-paged kernel.
*/
#ifdef TRAPDEBUG
printf("Kernel Instruction fault exip %x isr %x ilar %x\n",
frame->tf_exip, frame->tf_isr, frame->tf_ilar);
#endif
panictrap(frame->tf_vector, frame);
break;
/*NOTREACHED*/
case T_DATAFLT:
/* kernel mode data fault */
/* data fault on the user address? */
if ((frame->tf_dsr & CMMU_DSR_SU) == 0) {
type = T_DATAFLT + T_USER;
goto m88110_user_fault;
}
#ifdef TRAPDEBUG
printf("Kernel Data access fault exip %x dsr %x dlar %x\n",
frame->tf_exip, frame->tf_dsr, frame->tf_dlar);
#endif
fault_addr = frame->tf_dlar;
if (frame->tf_dsr & CMMU_DSR_RW) {
ftype = VM_PROT_READ;
fault_code = VM_PROT_READ;
} else {
ftype = VM_PROT_READ|VM_PROT_WRITE;
fault_code = VM_PROT_WRITE;
}
va = trunc_page((vaddr_t)fault_addr);
if (va == 0) {
panic("trap: bad kernel access at %x", fault_addr);
}
vm = p->p_vmspace;
map = kernel_map;
if (frame->tf_dsr & CMMU_DSR_BE) {
/*
* If it is a guarded access, bus error is OK.
*/
if ((frame->tf_exip & XIP_ADDR) >=
(unsigned)&guarded_access_start &&
(frame->tf_exip & XIP_ADDR) <=
(unsigned)&guarded_access_end) {
frame->tf_exip = (unsigned)&guarded_access_bad;
return;
}
}
if (frame->tf_dsr & (CMMU_DSR_SI | CMMU_DSR_PI)) {
frame->tf_dsr &= ~CMMU_DSR_WE; /* undefined */
/*
* On a segment or a page fault, call uvm_fault() to
* resolve the fault.
*/
if ((pcb_onfault = p->p_addr->u_pcb.pcb_onfault) != 0)
p->p_addr->u_pcb.pcb_onfault = 0;
result = uvm_fault(map, va, VM_FAULT_INVALID, ftype);
p->p_addr->u_pcb.pcb_onfault = pcb_onfault;
if (result == 0)
return;
}
if (frame->tf_dsr & CMMU_DSR_WE) { /* write fault */
/*
* This could be a write protection fault or an
* exception to set the used and modified bits
* in the pte. Basically, if we got a write error,
* then we already have a pte entry that faulted
* in from a previous seg fault or page fault.
* Get the pte and check the status of the
* modified and valid bits to determine if this
* indeed a real write fault. XXX smurph
*/
pte = pmap_pte(map->pmap, va);
#ifdef DEBUG
if (pte == PT_ENTRY_NULL)
panic("NULL pte on write fault??");
#endif
if (!(*pte & PG_M) && !(*pte & PG_RO)) {
/* Set modified bit and try the write again. */
#ifdef TRAPDEBUG
printf("Corrected kernel write fault, map %x pte %x\n",
map->pmap, *pte);
#endif
*pte |= PG_M;
return;
#if 1 /* shouldn't happen */
} else {
/* must be a real wp fault */
#ifdef TRAPDEBUG
printf("Uncorrected kernel write fault, map %x pte %x\n",
map->pmap, *pte);
#endif
if ((pcb_onfault = p->p_addr->u_pcb.pcb_onfault) != 0)
p->p_addr->u_pcb.pcb_onfault = 0;
result = uvm_fault(map, va, VM_FAULT_INVALID, ftype);
p->p_addr->u_pcb.pcb_onfault = pcb_onfault;
if (result == 0)
return;
#endif
}
}
panictrap(frame->tf_vector, frame);
/* NOTREACHED */
case T_INSTFLT+T_USER:
/* User mode instruction access fault */
/* FALLTHROUGH */
case T_DATAFLT+T_USER:
m88110_user_fault:
if (type == T_INSTFLT+T_USER) {
ftype = VM_PROT_READ;
fault_code = VM_PROT_READ;
#ifdef TRAPDEBUG
printf("User Instruction fault exip %x isr %x ilar %x\n",
frame->tf_exip, frame->tf_isr, frame->tf_ilar);
#endif
} else {
fault_addr = frame->tf_dlar;
if (frame->tf_dsr & CMMU_DSR_RW) {
ftype = VM_PROT_READ;
fault_code = VM_PROT_READ;
} else {
ftype = VM_PROT_READ|VM_PROT_WRITE;
fault_code = VM_PROT_WRITE;
}
#ifdef TRAPDEBUG
printf("User Data access fault exip %x dsr %x dlar %x\n",
frame->tf_exip, frame->tf_dsr, frame->tf_dlar);
#endif
}
va = trunc_page((vaddr_t)fault_addr);
vm = p->p_vmspace;
map = &vm->vm_map;
if ((pcb_onfault = p->p_addr->u_pcb.pcb_onfault) != 0)
p->p_addr->u_pcb.pcb_onfault = 0;
/*
* Call uvm_fault() to resolve non-bus error faults
* whenever possible.
*/
if (type == T_DATAFLT+T_USER) {
/* data faults */
if (frame->tf_dsr & CMMU_DSR_BE) {
/* bus error */
result = EACCES;
} else
if (frame->tf_dsr & (CMMU_DSR_SI | CMMU_DSR_PI)) {
/* segment or page fault */
result = uvm_fault(map, va, VM_FAULT_INVALID, ftype);
p->p_addr->u_pcb.pcb_onfault = pcb_onfault;
if (result == EACCES)
result = EFAULT;
} else
if (frame->tf_dsr & (CMMU_DSR_CP | CMMU_DSR_WA)) {
/* copyback or write allocate error */
result = EACCES;
} else
if (frame->tf_dsr & CMMU_DSR_WE) {
/* write fault */
/* This could be a write protection fault or an
* exception to set the used and modified bits
* in the pte. Basically, if we got a write
* error, then we already have a pte entry that
* faulted in from a previous seg fault or page
* fault.
* Get the pte and check the status of the
* modified and valid bits to determine if this
* indeed a real write fault. XXX smurph
*/
pte = pmap_pte(vm_map_pmap(map), va);
#ifdef DEBUG
if (pte == PT_ENTRY_NULL)
panic("NULL pte on write fault??");
#endif
if (!(*pte & PG_M) && !(*pte & PG_RO)) {
/*
* Set modified bit and try the
* write again.
*/
#ifdef TRAPDEBUG
printf("Corrected userland write fault, map %x pte %x\n",
map->pmap, *pte);
#endif
*pte |= PG_M;
/*
* invalidate ATCs to force
* table search
*/
set_dcmd(CMMU_DCMD_INV_UATC);
return;
} else {
/* must be a real wp fault */
#ifdef TRAPDEBUG
printf("Uncorrected userland write fault, map %x pte %x\n",
map->pmap, *pte);
#endif
result = uvm_fault(map, va, VM_FAULT_INVALID, ftype);
p->p_addr->u_pcb.pcb_onfault = pcb_onfault;
if (result == EACCES)
result = EFAULT;
}
} else {
#ifdef TRAPDEBUG
printf("Unexpected Data access fault dsr %x\n",
frame->tf_dsr);
#endif
panictrap(frame->tf_vector, frame);
}
} else {
/* instruction faults */
if (frame->tf_isr &
(CMMU_ISR_BE | CMMU_ISR_SP | CMMU_ISR_TBE)) {
/* bus error, supervisor protection */
result = EACCES;
} else
if (frame->tf_isr & (CMMU_ISR_SI | CMMU_ISR_PI)) {
/* segment or page fault */
result = uvm_fault(map, va, VM_FAULT_INVALID, ftype);
p->p_addr->u_pcb.pcb_onfault = pcb_onfault;
if (result == EACCES)
result = EFAULT;
} else {
#ifdef TRAPDEBUG
printf("Unexpected Instruction fault isr %x\n",
frame->tf_isr);
#endif
panictrap(frame->tf_vector, frame);
}
}
if ((caddr_t)va >= vm->vm_maxsaddr) {
if (result == 0) {
nss = btoc(USRSTACK - va);/* XXX check this */
if (nss > vm->vm_ssize)
vm->vm_ssize = nss;
}
}
/*
* This could be a fault caused in copyin*()
* while accessing user space.
*/
if (result != 0 && pcb_onfault != 0) {
frame->tf_exip = pcb_onfault;
/*
* Continue as if the fault had been resolved.
*/
result = 0;
}
if (result != 0) {
sig = result == EACCES ? SIGBUS : SIGSEGV;
fault_type = result == EACCES ?
BUS_ADRERR : SEGV_MAPERR;
}
break;
case T_MISALGNFLT+T_USER:
/* Fix any misaligned ld.d or st.d instructions */
sig = double_reg_fixup(frame);
fault_type = BUS_ADRALN;
break;
case T_PRIVINFLT+T_USER:
case T_ILLFLT+T_USER:
#ifndef DDB
case T_KDB_BREAK:
case T_KDB_ENTRY:
case T_KDB_TRACE:
#endif
case T_KDB_BREAK+T_USER:
case T_KDB_ENTRY+T_USER:
case T_KDB_TRACE+T_USER:
sig = SIGILL;
break;
case T_BNDFLT+T_USER:
sig = SIGFPE;
break;
case T_ZERODIV+T_USER:
sig = SIGFPE;
fault_type = FPE_INTDIV;
break;
case T_OVFFLT+T_USER:
sig = SIGFPE;
fault_type = FPE_INTOVF;
break;
case T_FPEPFLT+T_USER:
case T_FPEIFLT+T_USER:
sig = SIGFPE;
break;
case T_SIGSYS+T_USER:
sig = SIGSYS;
break;
case T_SIGTRAP+T_USER:
sig = SIGTRAP;
fault_type = TRAP_TRACE;
break;
case T_STEPBPT+T_USER:
#ifdef PTRACE
/*
* This trap is used by the kernel to support single-step
* debugging (although any user could generate this trap
* which should probably be handled differently). When a
* process is continued by a debugger with the PT_STEP
* function of ptrace (single step), the kernel inserts
* one or two breakpoints in the user process so that only
* one instruction (or two in the case of a delayed branch)
* is executed. When this breakpoint is hit, we get the
* T_STEPBPT trap.
*/
{
unsigned instr;
unsigned pc = PC_REGS(&frame->tf_regs);
/* read break instruction */
copyin((caddr_t)pc, &instr, sizeof(unsigned));
#if 0
printf("trap: %s (%d) breakpoint %x at %x: (adr %x ins %x)\n",
p->p_comm, p->p_pid, instr, pc,
p->p_md.md_ss_addr, p->p_md.md_ss_instr); /* XXX */
#endif
/* check and see if we got here by accident */
#ifdef notyet
if (p->p_md.md_ss_addr != pc || instr != SSBREAKPOINT) {
sig = SIGTRAP;
fault_type = TRAP_TRACE;
break;
}
#endif
/* restore original instruction and clear BP */
instr = p->p_md.md_ss_instr;
if (instr != 0)
ss_put_value(p, pc, instr, sizeof(instr));
p->p_md.md_ss_addr = 0;
p->p_md.md_ss_instr = 0;
sig = SIGTRAP;
fault_type = TRAP_BRKPT;
}
#else
sig = SIGTRAP;
fault_type = TRAP_TRACE;
#endif
break;
case T_USERBPT+T_USER:
/*
* This trap is meant to be used by debuggers to implement
* breakpoint debugging. When we get this trap, we just
* return a signal which gets caught by the debugger.
*/
sig = SIGTRAP;
fault_type = TRAP_BRKPT;
break;
case T_ASTFLT+T_USER:
uvmexp.softs++;
want_ast = 0;
if (p->p_flag & P_OWEUPC) {
p->p_flag &= ~P_OWEUPC;
ADDUPROF(p);
}
break;
}
/*
* If trap from supervisor mode, just return
*/
if (type < T_USER)
return;
if (sig) {
sv.sival_int = fault_addr;
trapsignal(p, sig, fault_code, fault_type, sv);
}
userret(p, frame, sticks);
}
void
m88100_trap(unsigned type, struct trapframe *frame)
{
struct proc *p;
u_quad_t sticks = 0;
struct vm_map *map;
vaddr_t va, pcb_onfault;
vm_prot_t ftype;
int fault_type, pbus_type;
u_long fault_code;
unsigned nss, fault_addr;
struct vmspace *vm;
union sigval sv;
int result;
#ifdef DDB
int s;
#endif
int sig = 0;
extern struct vm_map *kernel_map;
extern caddr_t guarded_access_start;
extern caddr_t guarded_access_end;
extern caddr_t guarded_access_bad;
uvmexp.traps++;
if ((p = curproc) == NULL)
p = &proc0;
if (USERMODE(frame->tf_epsr)) {
sticks = p->p_sticks;
type += T_USER;
p->p_md.md_tf = frame; /* for ptrace/signals */
}
fault_type = 0;
fault_code = 0;
fault_addr = frame->tf_sxip & XIP_ADDR;
switch (type) {
default:
panictrap(frame->tf_vector, frame);
break;
/*NOTREACHED*/
#if defined(DDB)
case T_KDB_BREAK:
s = splhigh();
db_enable_interrupt();
ddb_break_trap(T_KDB_BREAK, (db_regs_t*)frame);
db_disable_interrupt();
splx(s);
return;
case T_KDB_ENTRY:
s = splhigh();
db_enable_interrupt();
ddb_entry_trap(T_KDB_ENTRY, (db_regs_t*)frame);
db_disable_interrupt();
splx(s);
return;
#endif /* DDB */
case T_ILLFLT:
printf("Unimplemented opcode!\n");
panictrap(frame->tf_vector, frame);
break;
case T_INT:
case T_INT+T_USER:
/* This function pointer is set in machdep.c
It calls m188_ext_int or sbc_ext_int depending
on the value of brdtyp - smurph */
(*md.interrupt_func)(T_INT, frame);
return;
case T_MISALGNFLT:
printf("kernel misaligned access exception @ 0x%08x\n",
frame->tf_sxip);
panictrap(frame->tf_vector, frame);
break;
case T_INSTFLT:
/* kernel mode instruction access fault.
* Should never, never happen for a non-paged kernel.
*/
#ifdef TRAPDEBUG
pbus_type = CMMU_PFSR_FAULT(frame->tf_ipfsr);
printf("Kernel Instruction fault #%d (%s) v = 0x%x, frame 0x%x cpu %d\n",
pbus_type, pbus_exception_type[pbus_type],
fault_addr, frame, frame->tf_cpu);
#endif
panictrap(frame->tf_vector, frame);
break;
case T_DATAFLT:
/* kernel mode data fault */
/* data fault on the user address? */
if ((frame->tf_dmt0 & DMT_DAS) == 0) {
type = T_DATAFLT + T_USER;
goto user_fault;
}
fault_addr = frame->tf_dma0;
if (frame->tf_dmt0 & (DMT_WRITE|DMT_LOCKBAR)) {
ftype = VM_PROT_READ|VM_PROT_WRITE;
fault_code = VM_PROT_WRITE;
} else {
ftype = VM_PROT_READ;
fault_code = VM_PROT_READ;
}
va = trunc_page((vaddr_t)fault_addr);
if (va == 0) {
panic("trap: bad kernel access at %x", fault_addr);
}
vm = p->p_vmspace;
map = kernel_map;
pbus_type = CMMU_PFSR_FAULT(frame->tf_dpfsr);
#ifdef TRAPDEBUG
printf("Kernel Data access fault #%d (%s) v = 0x%x, frame 0x%x cpu %d\n",
pbus_type, pbus_exception_type[pbus_type],
fault_addr, frame, frame->tf_cpu);
#endif
switch (pbus_type) {
case CMMU_PFSR_BERROR:
/*
* If it is a guarded access, bus error is OK.
*/
if ((frame->tf_sxip & XIP_ADDR) >=
(unsigned)&guarded_access_start &&
(frame->tf_sxip & XIP_ADDR) <=
(unsigned)&guarded_access_end) {
frame->tf_snip =
((unsigned)&guarded_access_bad ) | NIP_V;
frame->tf_sfip =
((unsigned)&guarded_access_bad + 4) | FIP_V;
frame->tf_sxip = 0;
/* We sort of resolved the fault ourselves
* because we know where it came from
* [guarded_access()]. But we must still think
* about the other possible transactions in
* dmt1 & dmt2. Mark dmt0 so that
* data_access_emulation skips it. XXX smurph
*/
frame->tf_dmt0 |= DMT_SKIP;
data_access_emulation((unsigned *)frame);
frame->tf_dpfsr = 0;
frame->tf_dmt0 = 0;
return;
}
break;
case CMMU_PFSR_SUCCESS:
/*
* The fault was resolved. Call data_access_emulation
* to drain the data unit pipe line and reset dmt0
* so that trap won't get called again.
*/
data_access_emulation((unsigned *)frame);
frame->tf_dpfsr = 0;
frame->tf_dmt0 = 0;
return;
case CMMU_PFSR_SFAULT:
case CMMU_PFSR_PFAULT:
if ((pcb_onfault = p->p_addr->u_pcb.pcb_onfault) != 0)
p->p_addr->u_pcb.pcb_onfault = 0;
result = uvm_fault(map, va, VM_FAULT_INVALID, ftype);
p->p_addr->u_pcb.pcb_onfault = pcb_onfault;
if (result == 0) {
/*
* We could resolve the fault. Call
* data_access_emulation to drain the data
* unit pipe line and reset dmt0 so that trap
* won't get called again.
*/
data_access_emulation((unsigned *)frame);
frame->tf_dpfsr = 0;
frame->tf_dmt0 = 0;
return;
}
break;
}
#ifdef TRAPDEBUG
printf("PBUS Fault %d (%s) va = 0x%x\n", pbus_type,
pbus_exception_type[pbus_type], va);
#endif
panictrap(frame->tf_vector, frame);
/* NOTREACHED */
case T_INSTFLT+T_USER:
/* User mode instruction access fault */
/* FALLTHROUGH */
case T_DATAFLT+T_USER:
user_fault:
if (type == T_INSTFLT + T_USER) {
pbus_type = CMMU_PFSR_FAULT(frame->tf_ipfsr);
#ifdef TRAPDEBUG
printf("User Instruction fault #%d (%s) v = 0x%x, frame 0x%x cpu %d\n",
pbus_type, pbus_exception_type[pbus_type],
fault_addr, frame, frame->tf_cpu);
#endif
} else {
fault_addr = frame->tf_dma0;
pbus_type = CMMU_PFSR_FAULT(frame->tf_dpfsr);
#ifdef TRAPDEBUG
printf("User Data access fault #%d (%s) v = 0x%x, frame 0x%x cpu %d\n",
pbus_type, pbus_exception_type[pbus_type],
fault_addr, frame, frame->tf_cpu);
#endif
}
if (frame->tf_dmt0 & (DMT_WRITE | DMT_LOCKBAR)) {
ftype = VM_PROT_READ | VM_PROT_WRITE;
fault_code = VM_PROT_WRITE;
} else {
ftype = VM_PROT_READ;
fault_code = VM_PROT_READ;
}
va = trunc_page((vaddr_t)fault_addr);
vm = p->p_vmspace;
map = &vm->vm_map;
if ((pcb_onfault = p->p_addr->u_pcb.pcb_onfault) != 0)
p->p_addr->u_pcb.pcb_onfault = 0;
/* Call uvm_fault() to resolve non-bus error faults */
switch (pbus_type) {
case CMMU_PFSR_SUCCESS:
result = 0;
break;
case CMMU_PFSR_BERROR:
result = EACCES;
break;
default:
result = uvm_fault(map, va, VM_FAULT_INVALID, ftype);
if (result == EACCES)
result = EFAULT;
break;
}
p->p_addr->u_pcb.pcb_onfault = pcb_onfault;
if ((caddr_t)va >= vm->vm_maxsaddr) {
if (result == 0) {
nss = btoc(USRSTACK - va);/* XXX check this */
if (nss > vm->vm_ssize)
vm->vm_ssize = nss;
}
}
/*
* This could be a fault caused in copyin*()
* while accessing user space.
*/
if (result != 0 && pcb_onfault != 0) {
frame->tf_snip = pcb_onfault | NIP_V;
frame->tf_sfip = (pcb_onfault + 4) | FIP_V;
frame->tf_sxip = 0;
/*
* Continue as if the fault had been resolved, but
* do not try to complete the faulting access.
*/
frame->tf_dmt0 |= DMT_SKIP;
result = 0;
}
if (result == 0) {
if (type == T_DATAFLT+T_USER) {
/*
* We could resolve the fault. Call
* data_access_emulation to drain the data unit
* pipe line and reset dmt0 so that trap won't
* get called again.
*/
data_access_emulation((unsigned *)frame);
frame->tf_dpfsr = 0;
frame->tf_dmt0 = 0;
} else {
/*
* back up SXIP, SNIP,
* clearing the Error bit
*/
frame->tf_sfip = frame->tf_snip & ~FIP_E;
frame->tf_snip = frame->tf_sxip & ~NIP_E;
frame->tf_ipfsr = 0;
}
} else {
sig = result == EACCES ? SIGBUS : SIGSEGV;
fault_type = result == EACCES ?
BUS_ADRERR : SEGV_MAPERR;
}
break;
case T_MISALGNFLT+T_USER:
/* Fix any misaligned ld.d or st.d instructions */
sig = double_reg_fixup(frame);
fault_type = BUS_ADRALN;
break;
case T_PRIVINFLT+T_USER:
case T_ILLFLT+T_USER:
#ifndef DDB
case T_KDB_BREAK:
case T_KDB_ENTRY:
#endif
case T_KDB_BREAK+T_USER:
case T_KDB_ENTRY+T_USER:
case T_KDB_TRACE:
case T_KDB_TRACE+T_USER:
sig = SIGILL;
break;
case T_BNDFLT+T_USER:
sig = SIGFPE;
break;
case T_ZERODIV+T_USER:
sig = SIGFPE;
fault_type = FPE_INTDIV;
break;
case T_OVFFLT+T_USER:
sig = SIGFPE;
fault_type = FPE_INTOVF;
break;
case T_FPEPFLT+T_USER:
case T_FPEIFLT+T_USER:
sig = SIGFPE;
break;
case T_SIGSYS+T_USER:
sig = SIGSYS;
break;
case T_SIGTRAP+T_USER:
sig = SIGTRAP;
fault_type = TRAP_TRACE;
break;
case T_STEPBPT+T_USER:
#ifdef PTRACE
/*
* This trap is used by the kernel to support single-step
* debugging (although any user could generate this trap
* which should probably be handled differently). When a
* process is continued by a debugger with the PT_STEP
* function of ptrace (single step), the kernel inserts
* one or two breakpoints in the user process so that only
* one instruction (or two in the case of a delayed branch)
* is executed. When this breakpoint is hit, we get the
* T_STEPBPT trap.
*/
{
unsigned va;
unsigned instr;
unsigned pc = PC_REGS(&frame->tf_regs);
/* read break instruction */
copyin((caddr_t)pc, &instr, sizeof(unsigned));
#if 0
printf("trap: %s (%d) breakpoint %x at %x: (adr %x ins %x)\n",
p->p_comm, p->p_pid, instr, pc,
p->p_md.md_ss_addr, p->p_md.md_ss_instr); /* XXX */
#endif
/* check and see if we got here by accident */
if ((p->p_md.md_ss_addr != pc &&
p->p_md.md_ss_taken_addr != pc) ||
instr != SSBREAKPOINT) {
sig = SIGTRAP;
fault_type = TRAP_TRACE;
break;
}
/* restore original instruction and clear BP */
va = p->p_md.md_ss_addr;
if (va != 0) {
instr = p->p_md.md_ss_instr;
ss_put_value(p, va, instr, sizeof(instr));
}
/* branch taken instruction */
instr = p->p_md.md_ss_taken_instr;
if (instr != 0) {
va = p->p_md.md_ss_taken_addr;
ss_put_value(p, va, instr, sizeof(instr));
}
#if 1
frame->tf_sfip = frame->tf_snip;
frame->tf_snip = pc | NIP_V;
#endif
p->p_md.md_ss_addr = 0;
p->p_md.md_ss_instr = 0;
p->p_md.md_ss_taken_addr = 0;
p->p_md.md_ss_taken_instr = 0;
sig = SIGTRAP;
fault_type = TRAP_BRKPT;
}
#else
sig = SIGTRAP;
fault_type = TRAP_TRACE;
#endif
break;
case T_USERBPT+T_USER:
/*
* This trap is meant to be used by debuggers to implement
* breakpoint debugging. When we get this trap, we just
* return a signal which gets caught by the debugger.
*/
frame->tf_sfip = frame->tf_snip;
frame->tf_snip = frame->tf_sxip;
sig = SIGTRAP;
fault_type = TRAP_BRKPT;
break;
case T_ASTFLT+T_USER:
uvmexp.softs++;
want_ast = 0;
if (p->p_flag & P_OWEUPC) {
p->p_flag &= ~P_OWEUPC;
ADDUPROF(p);
}
break;
}
/*
* If trap from supervisor mode, just return
*/
if (type < T_USER)
return;
if (sig) {
sv.sival_int = fault_addr;
trapsignal(p, sig, fault_code, fault_type, sv);
/*
* don't want multiple faults - we are going to
* deliver signal.
*/
frame->tf_dmt0 = 0;
frame->tf_ipfsr = frame->tf_dpfsr = 0;
}
userret(p, frame, sticks);
}
/*ARGSUSED*/
void
trap(struct trapframe *tf, int type, u_int code, u_int v)
{
struct lwp *l;
struct proc *p;
struct pcb *pcb;
ksiginfo_t ksi;
int tmp;
int rv;
u_quad_t sticks;
void *onfault;
curcpu()->ci_data.cpu_ntrap++;
l = curlwp;
p = l->l_proc;
pcb = lwp_getpcb(l);
onfault = pcb->pcb_onfault;
KSI_INIT_TRAP(&ksi);
ksi.ksi_trap = type & ~T_USER;
KASSERT(pcb != NULL);
if (USERMODE(tf->tf_sr)) {
type |= T_USER;
sticks = p->p_sticks;
l->l_md.md_regs = tf->tf_regs;
LWP_CACHE_CREDS(l, p);
} else {
sticks = 0;
/* XXX: Detect trap recursion? */
}
switch (type) {
default:
dopanic:
printf("trap type=0x%x, code=0x%x, v=0x%x\n", type, code, v);
/*
* Let the kernel debugger see the trap frame that
* caused us to panic. This is a convenience so
* one can see registers at the point of failure.
*/
tmp = splhigh();
#ifdef KGDB
/* If connected, step or cont returns 1 */
if (kgdb_trap(type, tf))
goto kgdb_cont;
#endif
#ifdef DDB
(void) kdb_trap(type, (db_regs_t *) tf);
#endif
#ifdef KGDB
kgdb_cont:
#endif
splx(tmp);
if (panicstr) {
/*
* Note: panic is smart enough to do:
* boot(RB_AUTOBOOT | RB_NOSYNC, NULL)
* if we call it again.
*/
panic("trap during panic!");
}
regdump(tf, 128);
type &= ~T_USER;
if ((u_int)type < trap_types)
panic(trap_type[type]);
panic("trap type 0x%x", type);
case T_BUSERR: /* kernel bus error */
if (onfault == NULL)
goto dopanic;
rv = EFAULT;
/*FALLTHROUGH*/
copyfault:
/*
* If we have arranged to catch this fault in any of the
* copy to/from user space routines, set PC to return to
* indicated location and set flag informing buserror code
* that it may need to clean up stack frame.
*/
tf->tf_stackadj = exframesize[tf->tf_format];
tf->tf_format = tf->tf_vector = 0;
tf->tf_pc = (int)onfault;
tf->tf_regs[D0] = rv;
goto done;
case T_BUSERR|T_USER: /* bus error */
case T_ADDRERR|T_USER: /* address error */
ksi.ksi_addr = (void *)v;
ksi.ksi_signo = SIGBUS;
ksi.ksi_code = (type == (T_BUSERR|T_USER)) ?
BUS_OBJERR : BUS_ADRERR;
break;
case T_COPERR: /* kernel coprocessor violation */
case T_FMTERR|T_USER: /* do all RTE errors come in as T_USER? */
case T_FMTERR: /* ...just in case... */
/*
* The user has most likely trashed the RTE or FP state info
* in the stack frame of a signal handler.
*/
printf("pid %d: kernel %s exception\n", p->p_pid,
type==T_COPERR ? "coprocessor" : "format");
type |= T_USER;
mutex_enter(p->p_lock);
SIGACTION(p, SIGILL).sa_handler = SIG_DFL;
sigdelset(&p->p_sigctx.ps_sigignore, SIGILL);
sigdelset(&p->p_sigctx.ps_sigcatch, SIGILL);
sigdelset(&l->l_sigmask, SIGILL);
mutex_exit(p->p_lock);
ksi.ksi_signo = SIGILL;
ksi.ksi_addr = (void *)(int)tf->tf_format;
ksi.ksi_code = (type == T_COPERR) ?
ILL_COPROC : ILL_ILLOPC;
break;
case T_COPERR|T_USER: /* user coprocessor violation */
/* What is a proper response here? */
ksi.ksi_signo = SIGFPE;
ksi.ksi_code = FPE_FLTINV;
break;
case T_FPERR|T_USER: /* 68881 exceptions */
/*
* We pass along the 68881 status register which locore stashed
* in code for us.
*/
ksi.ksi_signo = SIGFPE;
ksi.ksi_code = fpsr2siginfocode(code);
break;
case T_FPEMULI: /* FPU faults in supervisor mode */
case T_FPEMULD:
if (nofault) /* Doing FPU probe? */
longjmp(nofault);
goto dopanic;
case T_FPEMULI|T_USER: /* unimplemented FP instruction */
case T_FPEMULD|T_USER: /* unimplemented FP data type */
#ifdef FPU_EMULATE
if (fpu_emulate(tf, &pcb->pcb_fpregs, &ksi) == 0)
; /* XXX - Deal with tracing? (tf->tf_sr & PSL_T) */
#else
uprintf("pid %d killed: no floating point support\n", p->p_pid);
ksi.ksi_signo = SIGILL;
ksi.ksi_code = ILL_ILLOPC;
#endif
break;
case T_ILLINST|T_USER: /* illegal instruction fault */
case T_PRIVINST|T_USER: /* privileged instruction fault */
ksi.ksi_addr = (void *)(int)tf->tf_format;
ksi.ksi_signo = SIGILL;
ksi.ksi_code = (type == (T_PRIVINST|T_USER)) ?
ILL_PRVOPC : ILL_ILLOPC;
break;
case T_ZERODIV|T_USER: /* Divide by zero */
ksi.ksi_code = FPE_FLTDIV;
case T_CHKINST|T_USER: /* CHK instruction trap */
case T_TRAPVINST|T_USER: /* TRAPV instruction trap */
ksi.ksi_addr = (void *)(int)tf->tf_format;
ksi.ksi_signo = SIGFPE;
break;
/*
* XXX: Trace traps are a nightmare.
*
* HP-UX uses trap #1 for breakpoints,
* NetBSD/m68k uses trap #2,
* SUN 3.x uses trap #15,
* DDB and KGDB uses trap #15 (for kernel breakpoints;
* handled elsewhere).
*
* NetBSD and HP-UX traps both get mapped by locore.s into T_TRACE.
* SUN 3.x traps get passed through as T_TRAP15 and are not really
* supported yet.
*
* XXX: We should never get kernel-mode T_TRAP15
* XXX: because locore.s now gives them special treatment.
*/
case T_TRAP15: /* kernel breakpoint */
tf->tf_sr &= ~PSL_T;
goto done;
case T_TRACE|T_USER: /* user trace trap */
#ifdef COMPAT_SUNOS
/*
* SunOS uses Trap #2 for a "CPU cache flush"
* Just flush the on-chip caches and return.
* XXX - Too bad NetBSD uses trap 2...
*/
if (p->p_emul == &emul_sunos) {
/* get out fast */
goto done;
}
#endif
/* FALLTHROUGH */
case T_TRACE: /* tracing a trap instruction */
case T_TRAP15|T_USER: /* SUN user trace trap */
tf->tf_sr &= ~PSL_T;
ksi.ksi_signo = SIGTRAP;
break;
case T_ASTFLT: /* system async trap, cannot happen */
goto dopanic;
case T_ASTFLT|T_USER: /* user async trap */
astpending = 0;
/* T_SSIR is not used on a Sun2. */
if (l->l_pflag & LP_OWEUPC) {
l->l_pflag &= ~LP_OWEUPC;
ADDUPROF(l);
}
if (curcpu()->ci_want_resched)
preempt();
goto douret;
case T_MMUFLT: /* kernel mode page fault */
/* Hacks to avoid calling VM code from debugger. */
#ifdef DDB
if (db_recover != 0)
goto dopanic;
#endif
#ifdef KGDB
if (kgdb_recover != 0)
goto dopanic;
#endif
/*
* If we were doing profiling ticks or other user mode
* stuff from interrupt code, Just Say No.
*/
if (onfault == (void *)fubail || onfault == (void *)subail) {
#ifdef DEBUG
if (mmudebug & MDB_CPFAULT) {
printf("trap: copyfault fu/su bail\n");
Debugger();
}
#endif
rv = EFAULT;
goto copyfault;
}
/*FALLTHROUGH*/
case T_MMUFLT|T_USER: { /* page fault */
vaddr_t va;
struct vmspace *vm = p->p_vmspace;
struct vm_map *map;
vm_prot_t ftype;
extern struct vm_map *kernel_map;
#ifdef DEBUG
if ((mmudebug & MDB_WBFOLLOW) || MDB_ISPID(p->p_pid))
printf("trap: T_MMUFLT pid=%d, code=0x%x, v=0x%x, pc=0x%x, sr=0x%x\n",
p->p_pid, code, v, tf->tf_pc, tf->tf_sr);
#endif
/*
* It is only a kernel address space fault iff:
* 1. (type & T_USER) == 0 and: (2 or 3)
* 2. pcb_onfault not set or
* 3. pcb_onfault set but supervisor space data fault
* The last can occur during an exec() copyin where the
* argument space is lazy-allocated.
*/
map = &vm->vm_map;
if ((type & T_USER) == 0) {
/* supervisor mode fault */
if (onfault == NULL || KDFAULT(code))
map = kernel_map;
}
if (WRFAULT(code))
ftype = VM_PROT_WRITE;
else
ftype = VM_PROT_READ;
va = m68k_trunc_page((vaddr_t)v);
/*
* Need to resolve the fault.
*
* We give the pmap code a chance to resolve faults by
* reloading translations that it was forced to unload.
* This function does that, and calls vm_fault if it
* could not resolve the fault by reloading the MMU.
* This function may also, for example, disallow any
* faults in the kernel text segment, etc.
*/
pcb->pcb_onfault = NULL;
rv = _pmap_fault(map, va, ftype);
pcb->pcb_onfault = onfault;
#ifdef DEBUG
if (rv && MDB_ISPID(p->p_pid)) {
printf("vm_fault(%p, 0x%lx, 0x%x) -> 0x%x\n",
map, va, ftype, rv);
if (mmudebug & MDB_WBFAILED)
Debugger();
}
#endif /* DEBUG */
/*
* If this was a stack access we keep track of the maximum
* accessed stack size. Also, if vm_fault gets a protection
* failure it is due to accessing the stack region outside
* the current limit and we need to reflect that as an access
* error.
*/
if (rv == 0) {
if (map != kernel_map && (void *)va >= vm->vm_maxsaddr)
uvm_grow(p, va);
if ((type & T_USER) == 0 && ucas_ras_check(tf)) {
return;
}
goto finish;
}
if (rv == EACCES) {
ksi.ksi_code = SEGV_ACCERR;
rv = EFAULT;
} else
ksi.ksi_code = SEGV_MAPERR;
if ((type & T_USER) == 0) {
/* supervisor mode fault */
if (onfault) {
#ifdef DEBUG
if (mmudebug & MDB_CPFAULT) {
printf("trap: copyfault pcb_onfault\n");
Debugger();
}
#endif
goto copyfault;
}
printf("vm_fault(%p, 0x%lx, 0x%x) -> 0x%x\n",
map, va, ftype, rv);
goto dopanic;
}
ksi.ksi_addr = (void *)v;
switch (rv) {
case ENOMEM:
printf("UVM: pid %d (%s), uid %d killed: out of swap\n",
p->p_pid, p->p_comm,
l->l_cred ?
kauth_cred_geteuid(l->l_cred) : -1);
ksi.ksi_signo = SIGKILL;
break;
case EINVAL:
ksi.ksi_signo = SIGBUS;
ksi.ksi_code = BUS_ADRERR;
break;
case EACCES:
ksi.ksi_signo = SIGSEGV;
ksi.ksi_code = SEGV_ACCERR;
break;
default:
ksi.ksi_signo = SIGSEGV;
ksi.ksi_code = SEGV_MAPERR;
break;
}
break;
} /* T_MMUFLT */
} /* switch */
finish:
/* If trap was from supervisor mode, just return. */
if ((type & T_USER) == 0)
goto done;
/* Post a signal if necessary. */
if (ksi.ksi_signo)
trapsignal(l, &ksi);
douret:
userret(l, tf, sticks);
done:;
/* XXX: Detect trap recursion? */
}
void
m88100_trap(unsigned type, struct trapframe *frame)
{
struct proc *p;
struct vm_map *map;
vaddr_t va, pcb_onfault;
vm_prot_t ftype;
int fault_type, pbus_type;
u_long fault_code;
unsigned fault_addr;
struct vmspace *vm;
union sigval sv;
int result;
#ifdef DDB
int s;
u_int psr;
#endif
int sig = 0;
extern struct vm_map *kernel_map;
uvmexp.traps++;
if ((p = curproc) == NULL)
p = &proc0;
if (USERMODE(frame->tf_epsr)) {
type += T_USER;
p->p_md.md_tf = frame; /* for ptrace/signals */
}
fault_type = 0;
fault_code = 0;
fault_addr = frame->tf_sxip & XIP_ADDR;
switch (type) {
default:
panictrap(frame->tf_vector, frame);
break;
/*NOTREACHED*/
#if defined(DDB)
case T_KDB_BREAK:
s = splhigh();
set_psr((psr = get_psr()) & ~PSR_IND);
ddb_break_trap(T_KDB_BREAK, (db_regs_t*)frame);
set_psr(psr);
splx(s);
return;
case T_KDB_ENTRY:
s = splhigh();
set_psr((psr = get_psr()) & ~PSR_IND);
ddb_entry_trap(T_KDB_ENTRY, (db_regs_t*)frame);
set_psr(psr);
splx(s);
return;
#endif /* DDB */
case T_ILLFLT:
printf("Unimplemented opcode!\n");
panictrap(frame->tf_vector, frame);
break;
case T_INT:
case T_INT+T_USER:
curcpu()->ci_intrdepth++;
md_interrupt_func(T_INT, frame);
curcpu()->ci_intrdepth--;
return;
case T_MISALGNFLT:
printf("kernel misaligned access exception @ 0x%08x\n",
frame->tf_sxip);
panictrap(frame->tf_vector, frame);
break;
case T_INSTFLT:
/* kernel mode instruction access fault.
* Should never, never happen for a non-paged kernel.
*/
#ifdef TRAPDEBUG
pbus_type = CMMU_PFSR_FAULT(frame->tf_ipfsr);
printf("Kernel Instruction fault #%d (%s) v = 0x%x, frame 0x%x cpu %p\n",
pbus_type, pbus_exception_type[pbus_type],
fault_addr, frame, frame->tf_cpu);
#endif
panictrap(frame->tf_vector, frame);
break;
case T_DATAFLT:
/* kernel mode data fault */
/* data fault on the user address? */
if ((frame->tf_dmt0 & DMT_DAS) == 0) {
type = T_DATAFLT + T_USER;
goto user_fault;
}
fault_addr = frame->tf_dma0;
if (frame->tf_dmt0 & (DMT_WRITE|DMT_LOCKBAR)) {
ftype = VM_PROT_READ|VM_PROT_WRITE;
fault_code = VM_PROT_WRITE;
} else {
ftype = VM_PROT_READ;
fault_code = VM_PROT_READ;
}
va = trunc_page((vaddr_t)fault_addr);
if (va == 0) {
panic("trap: bad kernel access at %x", fault_addr);
}
KERNEL_LOCK(LK_CANRECURSE | LK_EXCLUSIVE);
vm = p->p_vmspace;
map = kernel_map;
pbus_type = CMMU_PFSR_FAULT(frame->tf_dpfsr);
#ifdef TRAPDEBUG
printf("Kernel Data access fault #%d (%s) v = 0x%x, frame 0x%x cpu %p\n",
pbus_type, pbus_exception_type[pbus_type],
fault_addr, frame, frame->tf_cpu);
#endif
switch (pbus_type) {
case CMMU_PFSR_SUCCESS:
/*
* The fault was resolved. Call data_access_emulation
* to drain the data unit pipe line and reset dmt0
* so that trap won't get called again.
*/
data_access_emulation((unsigned *)frame);
frame->tf_dpfsr = 0;
frame->tf_dmt0 = 0;
KERNEL_UNLOCK();
return;
case CMMU_PFSR_SFAULT:
case CMMU_PFSR_PFAULT:
if ((pcb_onfault = p->p_addr->u_pcb.pcb_onfault) != 0)
p->p_addr->u_pcb.pcb_onfault = 0;
result = uvm_fault(map, va, VM_FAULT_INVALID, ftype);
p->p_addr->u_pcb.pcb_onfault = pcb_onfault;
if (result == 0) {
/*
* We could resolve the fault. Call
* data_access_emulation to drain the data
* unit pipe line and reset dmt0 so that trap
* won't get called again.
*/
data_access_emulation((unsigned *)frame);
frame->tf_dpfsr = 0;
frame->tf_dmt0 = 0;
KERNEL_UNLOCK();
return;
}
break;
}
#ifdef TRAPDEBUG
printf("PBUS Fault %d (%s) va = 0x%x\n", pbus_type,
pbus_exception_type[pbus_type], va);
#endif
KERNEL_UNLOCK();
panictrap(frame->tf_vector, frame);
/* NOTREACHED */
case T_INSTFLT+T_USER:
/* User mode instruction access fault */
/* FALLTHROUGH */
case T_DATAFLT+T_USER:
user_fault:
if (type == T_INSTFLT + T_USER) {
pbus_type = CMMU_PFSR_FAULT(frame->tf_ipfsr);
#ifdef TRAPDEBUG
printf("User Instruction fault #%d (%s) v = 0x%x, frame 0x%x cpu %p\n",
pbus_type, pbus_exception_type[pbus_type],
fault_addr, frame, frame->tf_cpu);
#endif
} else {
fault_addr = frame->tf_dma0;
pbus_type = CMMU_PFSR_FAULT(frame->tf_dpfsr);
#ifdef TRAPDEBUG
printf("User Data access fault #%d (%s) v = 0x%x, frame 0x%x cpu %p\n",
pbus_type, pbus_exception_type[pbus_type],
fault_addr, frame, frame->tf_cpu);
#endif
}
if (frame->tf_dmt0 & (DMT_WRITE | DMT_LOCKBAR)) {
ftype = VM_PROT_READ | VM_PROT_WRITE;
fault_code = VM_PROT_WRITE;
} else {
ftype = VM_PROT_READ;
fault_code = VM_PROT_READ;
}
va = trunc_page((vaddr_t)fault_addr);
KERNEL_PROC_LOCK(p);
vm = p->p_vmspace;
map = &vm->vm_map;
if ((pcb_onfault = p->p_addr->u_pcb.pcb_onfault) != 0)
p->p_addr->u_pcb.pcb_onfault = 0;
/* Call uvm_fault() to resolve non-bus error faults */
switch (pbus_type) {
case CMMU_PFSR_SUCCESS:
result = 0;
break;
case CMMU_PFSR_BERROR:
result = EACCES;
break;
default:
result = uvm_fault(map, va, VM_FAULT_INVALID, ftype);
break;
}
p->p_addr->u_pcb.pcb_onfault = pcb_onfault;
if ((caddr_t)va >= vm->vm_maxsaddr) {
if (result == 0)
uvm_grow(p, va);
else if (result == EACCES)
result = EFAULT;
}
KERNEL_PROC_UNLOCK(p);
/*
* This could be a fault caused in copyin*()
* while accessing user space.
*/
if (result != 0 && pcb_onfault != 0) {
frame->tf_snip = pcb_onfault | NIP_V;
frame->tf_sfip = (pcb_onfault + 4) | FIP_V;
frame->tf_sxip = 0;
/*
* Continue as if the fault had been resolved, but
* do not try to complete the faulting access.
*/
frame->tf_dmt0 |= DMT_SKIP;
result = 0;
}
if (result == 0) {
if (type == T_DATAFLT+T_USER) {
/*
* We could resolve the fault. Call
* data_access_emulation to drain the data unit
* pipe line and reset dmt0 so that trap won't
* get called again.
*/
data_access_emulation((unsigned *)frame);
frame->tf_dpfsr = 0;
frame->tf_dmt0 = 0;
} else {
/*
* back up SXIP, SNIP,
* clearing the Error bit
*/
frame->tf_sfip = frame->tf_snip & ~FIP_E;
frame->tf_snip = frame->tf_sxip & ~NIP_E;
frame->tf_ipfsr = 0;
}
} else {
sig = result == EACCES ? SIGBUS : SIGSEGV;
fault_type = result == EACCES ?
BUS_ADRERR : SEGV_MAPERR;
}
break;
case T_MISALGNFLT+T_USER:
/* Fix any misaligned ld.d or st.d instructions */
sig = double_reg_fixup(frame);
fault_type = BUS_ADRALN;
break;
case T_PRIVINFLT+T_USER:
case T_ILLFLT+T_USER:
#ifndef DDB
case T_KDB_BREAK:
case T_KDB_ENTRY:
#endif
case T_KDB_BREAK+T_USER:
case T_KDB_ENTRY+T_USER:
case T_KDB_TRACE:
case T_KDB_TRACE+T_USER:
sig = SIGILL;
break;
case T_BNDFLT+T_USER:
sig = SIGFPE;
break;
case T_ZERODIV+T_USER:
sig = SIGFPE;
fault_type = FPE_INTDIV;
break;
case T_OVFFLT+T_USER:
sig = SIGFPE;
fault_type = FPE_INTOVF;
break;
case T_FPEPFLT+T_USER:
sig = SIGFPE;
break;
case T_SIGSYS+T_USER:
sig = SIGSYS;
break;
case T_STEPBPT+T_USER:
#ifdef PTRACE
/*
* This trap is used by the kernel to support single-step
* debugging (although any user could generate this trap
* which should probably be handled differently). When a
* process is continued by a debugger with the PT_STEP
* function of ptrace (single step), the kernel inserts
* one or two breakpoints in the user process so that only
* one instruction (or two in the case of a delayed branch)
* is executed. When this breakpoint is hit, we get the
* T_STEPBPT trap.
*/
{
u_int instr;
vaddr_t pc = PC_REGS(&frame->tf_regs);
/* read break instruction */
copyin((caddr_t)pc, &instr, sizeof(u_int));
/* check and see if we got here by accident */
if ((p->p_md.md_bp0va != pc &&
p->p_md.md_bp1va != pc) ||
instr != SSBREAKPOINT) {
sig = SIGTRAP;
fault_type = TRAP_TRACE;
break;
}
/* restore original instruction and clear breakpoint */
if (p->p_md.md_bp0va == pc) {
ss_put_value(p, pc, p->p_md.md_bp0save);
p->p_md.md_bp0va = 0;
}
if (p->p_md.md_bp1va == pc) {
ss_put_value(p, pc, p->p_md.md_bp1save);
p->p_md.md_bp1va = 0;
}
#if 1
frame->tf_sfip = frame->tf_snip;
frame->tf_snip = pc | NIP_V;
#endif
sig = SIGTRAP;
fault_type = TRAP_BRKPT;
}
#else
sig = SIGTRAP;
fault_type = TRAP_TRACE;
#endif
break;
case T_USERBPT+T_USER:
/*
* This trap is meant to be used by debuggers to implement
* breakpoint debugging. When we get this trap, we just
* return a signal which gets caught by the debugger.
*/
frame->tf_sfip = frame->tf_snip;
frame->tf_snip = frame->tf_sxip;
sig = SIGTRAP;
fault_type = TRAP_BRKPT;
break;
case T_ASTFLT+T_USER:
uvmexp.softs++;
p->p_md.md_astpending = 0;
if (p->p_flag & P_OWEUPC) {
KERNEL_PROC_LOCK(p);
ADDUPROF(p);
KERNEL_PROC_UNLOCK(p);
}
if (curcpu()->ci_want_resched)
preempt(NULL);
break;
}
/*
* If trap from supervisor mode, just return
*/
if (type < T_USER)
return;
if (sig) {
sv.sival_int = fault_addr;
KERNEL_PROC_LOCK(p);
trapsignal(p, sig, fault_code, fault_type, sv);
KERNEL_PROC_UNLOCK(p);
/*
* don't want multiple faults - we are going to
* deliver signal.
*/
frame->tf_dmt0 = 0;
frame->tf_ipfsr = frame->tf_dpfsr = 0;
}
userret(p);
}
/*ARGSUSED*/
void
trap(struct frame *fp, int type, u_int code, u_int v)
{
extern char fubail[], subail[];
struct lwp *l;
struct proc *p;
ksiginfo_t ksi;
int s;
u_quad_t sticks;
uvmexp.traps++;
l = curlwp;
KSI_INIT_TRAP(&ksi);
ksi.ksi_trap = type & ~T_USER;
p = l->l_proc;
if (USERMODE(fp->f_sr)) {
type |= T_USER;
sticks = p->p_sticks;
l->l_md.md_regs = fp->f_regs;
LWP_CACHE_CREDS(l, p);
} else
sticks = 0;
#ifdef DIAGNOSTIC
if (l->l_addr == NULL)
panic("trap: type 0x%x, code 0x%x, v 0x%x -- no pcb",
type, code, v);
#endif
switch (type) {
default:
dopanic:
printf("trap type %d, code = 0x%x, v = 0x%x\n", type, code, v);
printf("%s program counter = 0x%x\n",
(type & T_USER) ? "user" : "kernel", fp->f_pc);
/*
* Let the kernel debugger see the trap frame that
* caused us to panic. This is a convenience so
* one can see registers at the point of failure.
*/
s = splhigh();
#ifdef KGDB
/* If connected, step or cont returns 1 */
if (kgdb_trap(type, (db_regs_t *)fp))
goto kgdb_cont;
#endif
#ifdef DDB
(void)kdb_trap(type, (db_regs_t *)fp);
#endif
#ifdef KGDB
kgdb_cont:
#endif
splx(s);
if (panicstr) {
printf("trap during panic!\n");
#ifdef DEBUG
/* XXX should be a machine-dependent hook */
printf("(press a key)\n"); (void)cngetc();
#endif
}
regdump((struct trapframe *)fp, 128);
type &= ~T_USER;
if ((u_int)type < trap_types)
panic(trap_type[type]);
panic("trap");
case T_BUSERR: /* Kernel bus error */
if (!l->l_addr->u_pcb.pcb_onfault)
goto dopanic;
/*
* If we have arranged to catch this fault in any of the
* copy to/from user space routines, set PC to return to
* indicated location and set flag informing buserror code
* that it may need to clean up stack frame.
*/
copyfault:
fp->f_stackadj = exframesize[fp->f_format];
fp->f_format = fp->f_vector = 0;
fp->f_pc = (int)l->l_addr->u_pcb.pcb_onfault;
return;
case T_BUSERR|T_USER: /* Bus error */
case T_ADDRERR|T_USER: /* Address error */
ksi.ksi_addr = (void *)v;
ksi.ksi_signo = SIGBUS;
ksi.ksi_code = (type == (T_BUSERR|T_USER)) ?
BUS_OBJERR : BUS_ADRERR;
break;
case T_ILLINST|T_USER: /* Illegal instruction fault */
case T_PRIVINST|T_USER: /* Privileged instruction fault */
ksi.ksi_addr = (void *)(int)fp->f_format;
/* XXX was ILL_PRIVIN_FAULT */
ksi.ksi_signo = SIGILL;
ksi.ksi_code = (type == (T_PRIVINST|T_USER)) ?
ILL_PRVOPC : ILL_ILLOPC;
break;
/*
* divde by zero, CHK/TRAPV inst
*/
case T_ZERODIV|T_USER: /* Divide by zero trap */
ksi.ksi_code = FPE_FLTDIV;
case T_CHKINST|T_USER: /* CHK instruction trap */
case T_TRAPVINST|T_USER: /* TRAPV instruction trap */
ksi.ksi_addr = (void *)(int)fp->f_format;
ksi.ksi_signo = SIGFPE;
break;
/*
* User coprocessor violation
*/
case T_COPERR|T_USER:
/* XXX What is a proper response here? */
ksi.ksi_signo = SIGFPE;
ksi.ksi_code = FPE_FLTINV;
break;
/*
* 6888x exceptions
*/
case T_FPERR|T_USER:
/*
* We pass along the 68881 status register which locore
* stashed in code for us. Note that there is a
* possibility that the bit pattern of this register
* will conflict with one of the FPE_* codes defined
* in signal.h. Fortunately for us, the only such
* codes we use are all in the range 1-7 and the low
* 3 bits of the status register are defined as 0 so
* there is no clash.
*/
ksi.ksi_signo = SIGFPE;
ksi.ksi_addr = (void *)code;
break;
/*
* FPU faults in supervisor mode.
*/
case T_ILLINST: /* fnop generates this, apparently. */
case T_FPEMULI:
case T_FPEMULD: {
extern label_t *nofault;
if (nofault) /* If we're probing. */
longjmp(nofault);
if (type == T_ILLINST)
printf("Kernel Illegal Instruction trap.\n");
else
printf("Kernel FPU trap.\n");
goto dopanic;
}
/*
* Unimplemented FPU instructions/datatypes.
*/
case T_FPEMULI|T_USER:
case T_FPEMULD|T_USER:
#ifdef FPU_EMULATE
if (fpu_emulate(fp, &l->l_addr->u_pcb.pcb_fpregs,
&ksi) == 0)
; /* XXX - Deal with tracing? (fp->f_sr & PSL_T) */
#else
uprintf("pid %d killed: no floating point support.\n",
p->p_pid);
ksi.ksi_signo = SIGILL;
ksi.ksi_code = ILL_ILLOPC;
#endif
break;
case T_COPERR: /* Kernel coprocessor violation */
case T_FMTERR: /* Kernel format error */
case T_FMTERR|T_USER: /* User format error */
/*
* The user has most likely trashed the RTE or FP state info
* in the stack frame of a signal handler.
*/
printf("pid %d: kernel %s exception\n", p->p_pid,
type==T_COPERR ? "coprocessor" : "format");
type |= T_USER;
mutex_enter(p->p_lock);
SIGACTION(p, SIGILL).sa_handler = SIG_DFL;
sigdelset(&p->p_sigctx.ps_sigignore, SIGILL);
sigdelset(&p->p_sigctx.ps_sigcatch, SIGILL);
sigdelset(&l->l_sigmask, SIGILL);
mutex_exit(p->p_lock);
ksi.ksi_signo = SIGILL;
ksi.ksi_addr = (void *)(int)fp->f_format;
/* XXX was ILL_RESAD_FAULT */
ksi.ksi_code = (type == T_COPERR) ?
ILL_COPROC : ILL_ILLOPC;
break;
/*
* XXX: Trace traps are a nightmare.
*
* HP-UX uses trap #1 for breakpoints,
* NetBSD/m68k uses trap #2,
* SUN 3.x uses trap #15,
* DDB and KGDB uses trap #15 (for kernel breakpoints;
* handled elsewhere).
*
* NetBSD and HP-UX traps both get mapped by locore.s into T_TRACE.
* SUN 3.x traps get passed through as T_TRAP15 and are not really
* supported yet.
*
* XXX: We should never get kernel-mode T_TRAP15 because
* XXX: locore.s now gives it special treatment.
*/
case T_TRAP15: /* SUN trace trap */
#ifdef DEBUG
printf("unexpected kernel trace trap, type = %d\n", type);
printf("program counter = 0x%x\n", fp->f_pc);
#endif
fp->f_sr &= ~PSL_T;
ksi.ksi_signo = SIGTRAP;
break;
case T_TRACE|T_USER: /* user trace trap */
#ifdef COMPAT_SUNOS
/*
* SunOS uses Trap #2 for a "CPU cache flush".
* Just flush the on-chip caches and return.
*/
if (p->p_emul == &emul_sunos) {
ICIA();
DCIU();
return;
}
#endif
/* FALLTHROUGH */
case T_TRACE: /* tracing a trap instruction */
case T_TRAP15|T_USER: /* SUN user trace trap */
fp->f_sr &= ~PSL_T;
ksi.ksi_signo = SIGTRAP;
break;
case T_ASTFLT: /* System async trap, cannot happen */
goto dopanic;
case T_ASTFLT|T_USER: /* User async trap. */
astpending = 0;
/*
* We check for software interrupts first. This is because
* they are at a higher level than ASTs, and on a VAX would
* interrupt the AST. We assume that if we are processing
* an AST that we must be at IPL0 so we don't bother to
* check. Note that we ensure that we are at least at SIR
* IPL while processing the SIR.
*/
spl1();
/* fall into... */
case T_SSIR: /* Software interrupt */
case T_SSIR|T_USER:
/*
* If this was not an AST trap, we are all done.
*/
if (type != (T_ASTFLT|T_USER)) {
uvmexp.traps--;
return;
}
spl0();
if (l->l_pflag & LP_OWEUPC) {
l->l_pflag &= ~LP_OWEUPC;
ADDUPROF(l);
}
if (curcpu()->ci_want_resched)
preempt();
goto out;
case T_MMUFLT: /* Kernel mode page fault */
/*
* If we were doing profiling ticks or other user mode
* stuff from interrupt code, Just Say No.
*/
if (l->l_addr->u_pcb.pcb_onfault == fubail ||
l->l_addr->u_pcb.pcb_onfault == subail)
goto copyfault;
/* fall into... */
case T_MMUFLT|T_USER: /* page fault */
{
vaddr_t va;
struct vmspace *vm = p->p_vmspace;
struct vm_map *map;
int rv;
vm_prot_t ftype;
extern struct vm_map *kernel_map;
#ifdef DEBUG
if ((mmudebug & MDB_WBFOLLOW) || MDB_ISPID(p->p_pid))
printf("trap: T_MMUFLT pid=%d, code=%x, v=%x, pc=%x, sr=%x\n",
p->p_pid, code, v, fp->f_pc, fp->f_sr);
#endif
/*
* It is only a kernel address space fault iff:
* 1. (type & T_USER) == 0 and
* 2. pcb_onfault not set or
* 3. pcb_onfault set but supervisor data fault
* The last can occur during an exec() copyin where the
* argument space is lazy-allocated.
*/
if (type == T_MMUFLT &&
(!l->l_addr->u_pcb.pcb_onfault || KDFAULT(code)))
map = kernel_map;
else {
map = vm ? &vm->vm_map : kernel_map;
if ((l->l_flag & LW_SA)
&& (~l->l_pflag & LP_SA_NOBLOCK)) {
l->l_savp->savp_faultaddr = (vaddr_t)v;
l->l_pflag |= LP_SA_PAGEFAULT;
}
}
if (WRFAULT(code))
ftype = VM_PROT_WRITE;
else
ftype = VM_PROT_READ;
va = trunc_page((vaddr_t)v);
#ifdef DEBUG
if (map == kernel_map && va == 0) {
printf("trap: bad kernel access at %x\n", v);
goto dopanic;
}
#endif
rv = uvm_fault(map, va, ftype);
#ifdef DEBUG
if (rv && MDB_ISPID(p->p_pid))
printf("uvm_fault(%p, 0x%lx, 0x%x) -> 0x%x\n",
map, va, ftype, rv);
#endif
/*
* If this was a stack access, we keep track of the maximum
* accessed stack size. Also, if vm_fault gets a protection
* failure, it is due to accessing the stack region outside
* the current limit and we need to reflect that as an access
* error.
*/
if (rv == 0) {
if (map != kernel_map && (void *)va >= vm->vm_maxsaddr)
uvm_grow(p, va);
if (type == T_MMUFLT) {
#if defined(M68040)
if (mmutype == MMU_68040)
(void)writeback(fp, 1);
#endif
return;
}
l->l_pflag &= ~LP_SA_PAGEFAULT;
goto out;
}
if (rv == EACCES) {
ksi.ksi_code = SEGV_ACCERR;
rv = EFAULT;
} else
ksi.ksi_code = SEGV_MAPERR;
if (type == T_MMUFLT) {
if (l->l_addr->u_pcb.pcb_onfault)
goto copyfault;
printf("uvm_fault(%p, 0x%lx, 0x%x) -> 0x%x\n",
map, va, ftype, rv);
printf(" type %x, code [mmu,,ssw]: %x\n",
type, code);
goto dopanic;
}
l->l_pflag &= ~LP_SA_PAGEFAULT;
ksi.ksi_addr = (void *)v;
if (rv == ENOMEM) {
printf("UVM: pid %d (%s), uid %d killed: out of swap\n",
p->p_pid, p->p_comm,
l->l_cred ?
kauth_cred_geteuid(l->l_cred) : -1);
ksi.ksi_signo = SIGKILL;
} else {
ksi.ksi_signo = SIGSEGV;
}
break;
}
}
if (ksi.ksi_signo)
trapsignal(l, &ksi);
if ((type & T_USER) == 0)
return;
out:
userret(l, fp, sticks, v, 1);
}
