void ADIO_Get_shared_fp(ADIO_File fd, int incr, ADIO_Offset *shared_fp,
int *error_code)
{
ADIO_Status status;
ADIO_Offset new_fp;
MPI_Comm dupcommself;
#ifdef ROMIO_NFS
if (fd->file_system == ADIO_NFS) {
ADIOI_NFS_Get_shared_fp(fd, incr, shared_fp, error_code);
return;
}
#endif
#ifdef ROMIO_BGL
/* BGLOCKLESS won't support shared fp */
if (fd->file_system == ADIO_BGL) {
ADIOI_BGL_Get_shared_fp(fd, incr, shared_fp, error_code);
return;
}
#endif
if (fd->shared_fp_fd == ADIO_FILE_NULL) {
MPI_Comm_dup(MPI_COMM_SELF, &dupcommself);
fd->shared_fp_fd = ADIO_Open(MPI_COMM_SELF, dupcommself,
fd->shared_fp_fname,
fd->file_system,
fd->fns,
ADIO_CREATE | ADIO_RDWR | ADIO_DELETE_ON_CLOSE,
0, MPI_BYTE, MPI_BYTE,
MPI_INFO_NULL,
ADIO_PERM_NULL, error_code);
if (*error_code != MPI_SUCCESS) return;
*shared_fp = 0;
ADIOI_WRITE_LOCK(fd->shared_fp_fd, 0, SEEK_SET, sizeof(ADIO_Offset));
ADIO_ReadContig(fd->shared_fp_fd, shared_fp, sizeof(ADIO_Offset),
MPI_BYTE, ADIO_EXPLICIT_OFFSET, 0, &status, error_code);
/* if the file is empty, the above function may return error
(reading beyond end of file). In that case, shared_fp = 0,
set above, is the correct value. */
}
else {
ADIOI_WRITE_LOCK(fd->shared_fp_fd, 0, SEEK_SET, sizeof(ADIO_Offset));
ADIO_ReadContig(fd->shared_fp_fd, shared_fp, sizeof(ADIO_Offset),
MPI_BYTE, ADIO_EXPLICIT_OFFSET, 0, &status, error_code);
if (*error_code != MPI_SUCCESS) {
ADIOI_UNLOCK(fd->shared_fp_fd, 0, SEEK_SET, sizeof(ADIO_Offset));
return;
}
}
if (incr == 0) {goto done;}
new_fp = *shared_fp + incr;
ADIO_WriteContig(fd->shared_fp_fd, &new_fp, sizeof(ADIO_Offset),
MPI_BYTE, ADIO_EXPLICIT_OFFSET, 0, &status, error_code);
done:
ADIOI_UNLOCK(fd->shared_fp_fd, 0, SEEK_SET, sizeof(ADIO_Offset));
}
void ADIO_Get_shared_fp(ADIO_File fd, ADIO_Offset incr, ADIO_Offset *shared_fp,
int *error_code)
{
ADIO_Status status;
ADIO_Offset new_fp;
MPI_Comm dupcommself;
/* Set the shared_fp in case this comes from an uninitialized stack variable
The read routines will not read into the address of this variable if the file
size of a shared pointer is 0, and if incr is always zero, this value will remain
uninitialized. Initialize it here to prevent incorrect values
*/
*shared_fp = 0;
#ifdef ROMIO_NFS
if (fd->file_system == ADIO_NFS) {
ADIOI_NFS_Get_shared_fp(fd, incr, shared_fp, error_code);
return;
}
#endif
if (fd->shared_fp_fd == ADIO_FILE_NULL) {
MPI_Comm_dup(MPI_COMM_SELF, &dupcommself);
fd->shared_fp_fd = ADIO_Open(MPI_COMM_SELF, dupcommself,
fd->shared_fp_fname,
fd->file_system,
fd->fns,
ADIO_CREATE | ADIO_RDWR | ADIO_DELETE_ON_CLOSE,
0, MPI_BYTE, MPI_BYTE,
MPI_INFO_NULL,
ADIO_PERM_NULL, error_code);
if (*error_code != MPI_SUCCESS) return;
ADIOI_WRITE_LOCK(fd->shared_fp_fd, 0, SEEK_SET, sizeof(ADIO_Offset));
ADIO_ReadContig(fd->shared_fp_fd, shared_fp, sizeof(ADIO_Offset),
MPI_BYTE, ADIO_EXPLICIT_OFFSET, 0, &status, error_code);
/* if the file is empty, the above function may return error
(reading beyond end of file). In that case, shared_fp = 0,
set above, is the correct value. */
}
else {
ADIOI_WRITE_LOCK(fd->shared_fp_fd, 0, SEEK_SET, sizeof(ADIO_Offset));
ADIO_ReadContig(fd->shared_fp_fd, shared_fp, sizeof(ADIO_Offset),
MPI_BYTE, ADIO_EXPLICIT_OFFSET, 0, &status, error_code);
if (*error_code != MPI_SUCCESS) {
ADIOI_UNLOCK(fd->shared_fp_fd, 0, SEEK_SET, sizeof(ADIO_Offset));
return;
}
}
if (incr == 0) {goto done;}
new_fp = *shared_fp + incr;
ADIO_WriteContig(fd->shared_fp_fd, &new_fp, sizeof(ADIO_Offset),
MPI_BYTE, ADIO_EXPLICIT_OFFSET, 0, &status, error_code);
done:
ADIOI_UNLOCK(fd->shared_fp_fd, 0, SEEK_SET, sizeof(ADIO_Offset));
}
void ADIOI_NFS_ReadContig(ADIO_File fd, void *buf, int count,
MPI_Datatype datatype, int file_ptr_type,
ADIO_Offset offset, ADIO_Status *status, int *error_code)
{
int err=-1, datatype_size, len;
#ifndef PRINT_ERR_MSG
static char myname[] = "ADIOI_NFS_READCONTIG";
#endif
MPI_Type_size(datatype, &datatype_size);
len = datatype_size * count;
if (file_ptr_type == ADIO_EXPLICIT_OFFSET) {
if (fd->fp_sys_posn != offset)
lseek(fd->fd_sys, offset, SEEK_SET);
if (fd->atomicity)
ADIOI_WRITE_LOCK(fd, offset, SEEK_SET, len);
else ADIOI_READ_LOCK(fd, offset, SEEK_SET, len);
err = read(fd->fd_sys, buf, len);
ADIOI_UNLOCK(fd, offset, SEEK_SET, len);
fd->fp_sys_posn = offset + err;
/* individual file pointer not updated */
}
else { /* read from curr. location of ind. file pointer */
offset = fd->fp_ind;
if (fd->fp_sys_posn != fd->fp_ind)
lseek(fd->fd_sys, fd->fp_ind, SEEK_SET);
if (fd->atomicity)
ADIOI_WRITE_LOCK(fd, offset, SEEK_SET, len);
else ADIOI_READ_LOCK(fd, offset, SEEK_SET, len);
err = read(fd->fd_sys, buf, len);
ADIOI_UNLOCK(fd, offset, SEEK_SET, len);
fd->fp_ind += err;
fd->fp_sys_posn = fd->fp_ind;
}
#ifdef HAVE_STATUS_SET_BYTES
if (err != -1) MPIR_Status_set_bytes(status, datatype, err);
#endif
#ifdef PRINT_ERR_MSG
*error_code = (err == -1) ? MPI_ERR_UNKNOWN : MPI_SUCCESS;
#else
if (err == -1) {
*error_code = MPIR_Err_setmsg(MPI_ERR_IO, MPIR_ADIO_ERROR,
myname, "I/O Error", "%s", strerror(errno));
ADIOI_Error(fd, *error_code, myname);
}
else *error_code = MPI_SUCCESS;
#endif
}
void ADIOI_NFS_ReadContig(ADIO_File fd, void *buf, int count,
MPI_Datatype datatype, int file_ptr_type,
ADIO_Offset offset, ADIO_Status *status, int *error_code)
{
int err=-1, datatype_size, len;
static char myname[] = "ADIOI_NFS_READCONTIG";
MPI_Type_size(datatype, &datatype_size);
len = datatype_size * count;
if (file_ptr_type == ADIO_EXPLICIT_OFFSET) {
if (fd->fp_sys_posn != offset)
lseek(fd->fd_sys, offset, SEEK_SET);
if (fd->atomicity)
ADIOI_WRITE_LOCK(fd, offset, SEEK_SET, len);
else ADIOI_READ_LOCK(fd, offset, SEEK_SET, len);
err = read(fd->fd_sys, buf, len);
ADIOI_UNLOCK(fd, offset, SEEK_SET, len);
fd->fp_sys_posn = offset + err;
/* individual file pointer not updated */
}
else { /* read from curr. location of ind. file pointer */
offset = fd->fp_ind;
if (fd->fp_sys_posn != fd->fp_ind)
lseek(fd->fd_sys, fd->fp_ind, SEEK_SET);
if (fd->atomicity)
ADIOI_WRITE_LOCK(fd, offset, SEEK_SET, len);
else ADIOI_READ_LOCK(fd, offset, SEEK_SET, len);
err = read(fd->fd_sys, buf, len);
ADIOI_UNLOCK(fd, offset, SEEK_SET, len);
fd->fp_ind += err;
fd->fp_sys_posn = fd->fp_ind;
}
/* --BEGIN ERROR HANDLING-- */
if (err == -1) {
*error_code = MPIO_Err_create_code(MPI_SUCCESS, MPIR_ERR_RECOVERABLE,
myname, __LINE__, MPI_ERR_IO,
"**io", "**io %s", strerror(errno));
return;
}
/* --END ERROR HANDLING-- */
#ifdef HAVE_STATUS_SET_BYTES
MPIR_Status_set_bytes(status, datatype, err);
#endif
*error_code = MPI_SUCCESS;
}
void ADIO_Set_shared_fp(ADIO_File fd, ADIO_Offset offset, int *error_code)
{
ADIO_Status status;
MPI_Comm dupcommself;
#ifdef ROMIO_NFS
if (fd->file_system == ADIO_NFS) {
ADIOI_NFS_Set_shared_fp(fd, offset, error_code);
return;
}
#endif
if (fd->shared_fp_fd == ADIO_FILE_NULL) {
MPI_Comm_dup(MPI_COMM_SELF, &dupcommself);
fd->shared_fp_fd = ADIO_Open(MPI_COMM_SELF, dupcommself,
fd->shared_fp_fname,
fd->file_system,
fd->fns,
ADIO_CREATE | ADIO_RDWR | ADIO_DELETE_ON_CLOSE,
0, MPI_BYTE, MPI_BYTE,
MPI_INFO_NULL,
ADIO_PERM_NULL, error_code);
}
if (*error_code != MPI_SUCCESS) return;
ADIOI_WRITE_LOCK(fd->shared_fp_fd, 0, SEEK_SET, sizeof(ADIO_Offset));
ADIO_WriteContig(fd->shared_fp_fd, &offset, sizeof(ADIO_Offset),
MPI_BYTE, ADIO_EXPLICIT_OFFSET, 0, &status, error_code);
ADIOI_UNLOCK(fd->shared_fp_fd, 0, SEEK_SET, sizeof(ADIO_Offset));
}
void ADIOI_BGL_Set_shared_fp(ADIO_File fd, ADIO_Offset offset, int *error_code)
{
int err;
MPI_Comm dupcommself;
static char myname[] = "ADIOI_BGL_SET_SHARED_FP";
if (fd->shared_fp_fd == ADIO_FILE_NULL) {
MPI_Comm_dup(MPI_COMM_SELF, &dupcommself);
fd->shared_fp_fd = ADIO_Open(MPI_COMM_SELF, dupcommself,
fd->shared_fp_fname,
fd->file_system, fd->fns,
ADIO_CREATE | ADIO_RDWR | ADIO_DELETE_ON_CLOSE,
0, MPI_BYTE, MPI_BYTE, MPI_INFO_NULL,
ADIO_PERM_NULL, error_code);
}
if (*error_code != MPI_SUCCESS) return;
ADIOI_WRITE_LOCK(fd->shared_fp_fd, 0, SEEK_SET, sizeof(ADIO_Offset));
lseek(fd->shared_fp_fd->fd_sys, 0, SEEK_SET);
err = write(fd->shared_fp_fd->fd_sys, &offset, sizeof(ADIO_Offset));
ADIOI_UNLOCK(fd->shared_fp_fd, 0, SEEK_SET, sizeof(ADIO_Offset));
if (err == -1) {
*error_code = MPIO_Err_create_code(MPI_SUCCESS, MPIR_ERR_RECOVERABLE,
myname, __LINE__, MPI_ERR_IO,
"**io",
"**io %s", strerror(errno));
}
else *error_code = MPI_SUCCESS;
}
void ADIOI_NFS_Set_shared_fp(ADIO_File fd, ADIO_Offset offset, int *error_code)
{
int err;
MPI_Comm dupcommself;
#ifndef PRINT_ERR_MSG
static char myname[] = "ADIOI_NFS_SET_SHARED_FP";
#endif
if (fd->shared_fp_fd == ADIO_FILE_NULL) {
MPI_Comm_dup(MPI_COMM_SELF, &dupcommself);
fd->shared_fp_fd = ADIO_Open(MPI_COMM_SELF, dupcommself, fd->shared_fp_fname,
fd->file_system, ADIO_CREATE | ADIO_RDWR | ADIO_DELETE_ON_CLOSE,
0, MPI_BYTE, MPI_BYTE, M_ASYNC, MPI_INFO_NULL,
ADIO_PERM_NULL, error_code);
}
if (*error_code != MPI_SUCCESS) return;
ADIOI_WRITE_LOCK(fd->shared_fp_fd, 0, SEEK_SET, sizeof(ADIO_Offset));
lseek(fd->shared_fp_fd->fd_sys, 0, SEEK_SET);
err = write(fd->shared_fp_fd->fd_sys, &offset, sizeof(ADIO_Offset));
ADIOI_UNLOCK(fd->shared_fp_fd, 0, SEEK_SET, sizeof(ADIO_Offset));
#ifdef PRINT_ERR_MSG
*error_code = (err == -1) ? MPI_ERR_UNKNOWN : MPI_SUCCESS;
#else
if (err == -1) {
*error_code = MPIR_Err_setmsg(MPI_ERR_IO, MPIR_ADIO_ERROR,
myname, "I/O Error", "%s", strerror(errno));
ADIOI_Error(fd, *error_code, myname);
}
else *error_code = MPI_SUCCESS;
#endif
}
void ADIOI_NFS_WriteContig(ADIO_File fd, const void *buf, int count,
MPI_Datatype datatype, int file_ptr_type,
ADIO_Offset offset, ADIO_Status *status, int *error_code)
{
ssize_t err=-1;
MPI_Count datatype_size, len;
ADIO_Offset bytes_xfered=0;
size_t wr_count;
static char myname[] = "ADIOI_NFS_WRITECONTIG";
char *p;
MPI_Type_size_x(datatype, &datatype_size);
len = datatype_size * (ADIO_Offset)count;
if (file_ptr_type == ADIO_INDIVIDUAL) {
offset = fd->fp_ind;
}
p = (char *)buf;
while (bytes_xfered < len) {
#ifdef ADIOI_MPE_LOGGING
MPE_Log_event( ADIOI_MPE_write_a, 0, NULL );
#endif
wr_count = len - bytes_xfered;
/* work around FreeBSD and OS X defects*/
if (wr_count > INT_MAX)
wr_count = INT_MAX;
ADIOI_WRITE_LOCK(fd, offset+bytes_xfered, SEEK_SET, wr_count);
err = pwrite(fd->fd_sys, p, wr_count, offset+bytes_xfered);
/* --BEGIN ERROR HANDLING-- */
if (err == -1) {
*error_code = MPIO_Err_create_code(MPI_SUCCESS,
MPIR_ERR_RECOVERABLE,
myname, __LINE__, MPI_ERR_IO, "**io",
"**io %s", strerror(errno));
fd->fp_sys_posn = -1;
return;
}
/* --END ERROR HANDLING-- */
#ifdef ADIOI_MPE_LOGGING
MPE_Log_event( ADIOI_MPE_write_b, 0, NULL );
#endif
ADIOI_UNLOCK(fd, offset+bytes_xfered, SEEK_SET, wr_count);
bytes_xfered += err;
p += err;
}
fd->fp_sys_posn = offset + bytes_xfered;
if (file_ptr_type == ADIO_INDIVIDUAL) {
fd->fp_ind += bytes_xfered;
}
#ifdef HAVE_STATUS_SET_BYTES
MPIR_Status_set_bytes(status, datatype, bytes_xfered);
#endif
*error_code = MPI_SUCCESS;
}
void ADIOI_NFS_ReadContig(ADIO_File fd, void *buf, int count,
MPI_Datatype datatype, int file_ptr_type,
ADIO_Offset offset, ADIO_Status *status, int *error_code)
{
ssize_t err=-1;
MPI_Count datatype_size, len;
ADIO_Offset bytes_xfered=0;
size_t rd_count;
static char myname[] = "ADIOI_NFS_READCONTIG";
char *p;
MPI_Type_size_x(datatype, &datatype_size);
len = datatype_size * count;
if (file_ptr_type == ADIO_INDIVIDUAL) {
offset = fd->fp_ind;
}
p = buf;
while (bytes_xfered < len ) {
rd_count = len - bytes_xfered;
/* FreeBSD and Darwin workaround: bigger than INT_MAX is an error */
if (rd_count > INT_MAX)
rd_count = INT_MAX;
if (fd->atomicity)
ADIOI_WRITE_LOCK(fd, offset+bytes_xfered, SEEK_SET, rd_count);
else ADIOI_READ_LOCK(fd, offset+bytes_xfered, SEEK_SET, rd_count);
#ifdef ADIOI_MPE_LOGGING
MPE_Log_event( ADIOI_MPE_read_a, 0, NULL );
#endif
err = pread(fd->fd_sys, p, rd_count, offset+bytes_xfered);
/* --BEGIN ERROR HANDLING-- */
if (err == -1) {
*error_code = MPIO_Err_create_code(MPI_SUCCESS,
MPIR_ERR_RECOVERABLE, myname, __LINE__, MPI_ERR_IO,
"**io", "**io %s", strerror(errno));
}
/* --END ERROR HANDLING-- */
#ifdef ADIOI_MPE_LOGGING
MPE_Log_event( ADIOI_MPE_read_b, 0, NULL );
#endif
ADIOI_UNLOCK(fd, offset+bytes_xfered, SEEK_SET, rd_count);
if (err == 0) {
/* end of file */
break;
}
bytes_xfered += err;
p += err;
}
fd->fp_sys_posn = offset + bytes_xfered;
if (file_ptr_type == ADIO_INDIVIDUAL) {
fd->fp_ind += bytes_xfered;
}
/* --END ERROR HANDLING-- */
#ifdef HAVE_STATUS_SET_BYTES
if (err != -1) MPIR_Status_set_bytes(status, datatype, bytes_xfered);
#endif
*error_code = MPI_SUCCESS;
}
int ADIOI_NFS_aio(ADIO_File fd, void *buf, int len, ADIO_Offset offset,
int wr, MPI_Request *request)
{
int err=-1, fd_sys;
int error_code, this_errno;
struct aiocb *aiocbp;
ADIOI_AIO_Request *aio_req;
fd_sys = fd->fd_sys;
aio_req = (ADIOI_AIO_Request*)ADIOI_Calloc(sizeof(ADIOI_AIO_Request), 1);
aiocbp = (struct aiocb *) ADIOI_Calloc(sizeof(struct aiocb), 1);
aiocbp->aio_offset = offset;
aiocbp->aio_buf = buf;
aiocbp->aio_nbytes = len;
#ifdef ROMIO_HAVE_STRUCT_AIOCB_WITH_AIO_WHENCE
aiocbp->aio_whence = SEEK_SET;
#endif
#ifdef ROMIO_HAVE_STRUCT_AIOCB_WITH_AIO_FILDES
aiocbp->aio_fildes = fd_sys;
#endif
#ifdef ROMIO_HAVE_STRUCT_AIOCB_WITH_AIO_SIGEVENT
# ifdef AIO_SIGNOTIFY_NONE
aiocbp->aio_sigevent.sigev_notify = SIGEV_NONE;
# endif
aiocbp->aio_sigevent.sigev_signo = 0;
#endif
#ifdef ROMIO_HAVE_STRUCT_AIOCB_WITH_AIO_REQPRIO
# ifdef AIO_PRIO_DFL
aiocbp->aio_reqprio = AIO_PRIO_DFL; /* not needed in DEC Unix 4.0 */
# else
aiocbp->aio_reqprio = 0;
# endif
#endif
if (wr) ADIOI_WRITE_LOCK(fd, offset, SEEK_SET, len);
else ADIOI_READ_LOCK(fd, offset, SEEK_SET, len);
#ifndef ROMIO_HAVE_AIO_CALLS_NEED_FILEDES
if (wr) err = aio_write(aiocbp);
else err = aio_read(aiocbp);
#else
/* Broken IBM interface */
if (wr) err = aio_write(fd_sys, aiocbp);
else err = aio_read(fd_sys, aiocbp);
#endif
this_errno = errno;
ADIOI_UNLOCK(fd, offset, SEEK_SET, len);
if (err == -1) {
if (this_errno == EAGAIN) {
/* exceeded the max. no. of outstanding requests.
complete all previous async. requests and try again. */
ADIO_WriteContig(fd, buf, len, MPI_BYTE, ADIO_EXPLICIT_OFFSET,
offset, NULL, &error_code);
MPIO_Completed_request_create(&fd, len, &error_code, request);
return 0;
} else {
return -this_errno;
}
}
aio_req->aiocbp = aiocbp;
if (ADIOI_GEN_greq_class == 0) {
MPIX_Grequest_class_create(ADIOI_GEN_aio_query_fn,
ADIOI_GEN_aio_free_fn, MPIU_Greq_cancel_fn,
ADIOI_GEN_aio_poll_fn, ADIOI_GEN_aio_wait_fn,
&ADIOI_GEN_greq_class);
}
MPIX_Grequest_class_allocate(ADIOI_GEN_greq_class, aio_req, request);
memcpy(&(aio_req->req), request, sizeof(MPI_Request));
return 0;
}
/*@
MPI_File_iread_shared - Nonblocking read using shared file pointer
Input Parameters:
. fh - file handle (handle)
. count - number of elements in buffer (nonnegative integer)
. datatype - datatype of each buffer element (handle)
Output Parameters:
. buf - initial address of buffer (choice)
. request - request object (handle)
.N fortran
@*/
int MPI_File_iread_shared(MPI_File fh, void *buf, int count,
MPI_Datatype datatype, MPI_Request *request)
{
int error_code, buftype_is_contig, filetype_is_contig;
ADIO_Offset bufsize;
ADIO_File adio_fh;
static char myname[] = "MPI_FILE_IREAD_SHARED";
MPI_Count datatype_size, incr;
MPI_Status status;
ADIO_Offset off, shared_fp;
MPI_Offset nbytes=0;
MPIU_THREAD_CS_ENTER(ALLFUNC,);
adio_fh = MPIO_File_resolve(fh);
/* --BEGIN ERROR HANDLING-- */
MPIO_CHECK_FILE_HANDLE(adio_fh, myname, error_code);
MPIO_CHECK_COUNT(adio_fh, count, myname, error_code);
MPIO_CHECK_DATATYPE(adio_fh, datatype, myname, error_code);
/* --END ERROR HANDLING-- */
MPI_Type_size_x(datatype, &datatype_size);
/* --BEGIN ERROR HANDLING-- */
MPIO_CHECK_INTEGRAL_ETYPE(adio_fh, count, datatype_size, myname, error_code);
MPIO_CHECK_FS_SUPPORTS_SHARED(adio_fh, myname, error_code);
MPIO_CHECK_COUNT_SIZE(adio_fh, count, datatype_size, myname, error_code);
/* --END ERROR HANDLING-- */
ADIOI_Datatype_iscontig(datatype, &buftype_is_contig);
ADIOI_Datatype_iscontig(adio_fh->filetype, &filetype_is_contig);
ADIOI_TEST_DEFERRED(adio_fh, myname, &error_code);
incr = (count*datatype_size)/adio_fh->etype_size;
ADIO_Get_shared_fp(adio_fh, incr, &shared_fp, &error_code);
/* --BEGIN ERROR HANDLING-- */
if (error_code != MPI_SUCCESS)
{
/* note: ADIO_Get_shared_fp should have set up error code already? */
MPIO_Err_return_file(adio_fh, error_code);
}
/* --END ERROR HANDLING-- */
if (buftype_is_contig && filetype_is_contig)
{
/* convert count and shared_fp to bytes */
bufsize = datatype_size * count;
off = adio_fh->disp + adio_fh->etype_size * shared_fp;
if (!(adio_fh->atomicity))
{
ADIO_IreadContig(adio_fh, buf, count, datatype, ADIO_EXPLICIT_OFFSET,
off, request, &error_code);
}
else
{
/* to maintain strict atomicity semantics with other concurrent
operations, lock (exclusive) and call blocking routine */
if (adio_fh->file_system != ADIO_NFS)
{
ADIOI_WRITE_LOCK(adio_fh, off, SEEK_SET, bufsize);
}
ADIO_ReadContig(adio_fh, buf, count, datatype, ADIO_EXPLICIT_OFFSET,
off, &status, &error_code);
if (adio_fh->file_system != ADIO_NFS)
{
ADIOI_UNLOCK(adio_fh, off, SEEK_SET, bufsize);
}
if (error_code == MPI_SUCCESS){
nbytes = count * datatype_size;
}
MPIO_Completed_request_create(&adio_fh, nbytes, &error_code, request);
}
}
else
{
ADIO_IreadStrided(adio_fh, buf, count, datatype, ADIO_EXPLICIT_OFFSET,
shared_fp, request, &error_code);
}
/* --BEGIN ERROR HANDLING-- */
if (error_code != MPI_SUCCESS)
error_code = MPIO_Err_return_file(adio_fh, error_code);
/* --END ERROR HANDLING-- */
fn_exit:
MPIU_THREAD_CS_EXIT(ALLFUNC,);
return error_code;
}
void ADIOI_NFS_WriteContig(ADIO_File fd, const void *buf, int count,
MPI_Datatype datatype, int file_ptr_type,
ADIO_Offset offset, ADIO_Status *status, int *error_code)
{
int err=-1;
MPI_Count datatype_size, len;
static char myname[] = "ADIOI_NFS_WRITECONTIG";
MPI_Type_size_x(datatype, &datatype_size);
len = datatype_size * count;
if (file_ptr_type == ADIO_EXPLICIT_OFFSET) {
if (fd->fp_sys_posn != offset) {
#ifdef ADIOI_MPE_LOGGING
MPE_Log_event( ADIOI_MPE_lseek_a, 0, NULL );
#endif
lseek(fd->fd_sys, offset, SEEK_SET);
#ifdef ADIOI_MPE_LOGGING
MPE_Log_event( ADIOI_MPE_lseek_b, 0, NULL );
#endif
}
ADIOI_WRITE_LOCK(fd, offset, SEEK_SET, len);
#ifdef ADIOI_MPE_LOGGING
MPE_Log_event( ADIOI_MPE_write_a, 0, NULL );
#endif
err = write(fd->fd_sys, buf, len);
#ifdef ADIOI_MPE_LOGGING
MPE_Log_event( ADIOI_MPE_write_b, 0, NULL );
#endif
ADIOI_UNLOCK(fd, offset, SEEK_SET, len);
fd->fp_sys_posn = offset + err;
/* individual file pointer not updated */
}
else { /* write from curr. location of ind. file pointer */
offset = fd->fp_ind;
if (fd->fp_sys_posn != fd->fp_ind) {
#ifdef ADIOI_MPE_LOGGING
MPE_Log_event( ADIOI_MPE_lseek_a, 0, NULL );
#endif
lseek(fd->fd_sys, fd->fp_ind, SEEK_SET);
#ifdef ADIOI_MPE_LOGGING
MPE_Log_event( ADIOI_MPE_lseek_b, 0, NULL );
#endif
}
ADIOI_WRITE_LOCK(fd, offset, SEEK_SET, len);
#ifdef ADIOI_MPE_LOGGING
MPE_Log_event( ADIOI_MPE_write_a, 0, NULL );
#endif
err = write(fd->fd_sys, buf, len);
#ifdef ADIOI_MPE_LOGGING
MPE_Log_event( ADIOI_MPE_write_b, 0, NULL );
#endif
ADIOI_UNLOCK(fd, offset, SEEK_SET, len);
fd->fp_ind += err;
fd->fp_sys_posn = fd->fp_ind;
}
/* --BEGIN ERROR HANDLING-- */
if (err == -1) {
*error_code = MPIO_Err_create_code(MPI_SUCCESS, MPIR_ERR_RECOVERABLE,
myname, __LINE__, MPI_ERR_IO,
"**io",
"**io %s", strerror(errno));
return;
}
/* --END ERROR HANDLING-- */
#ifdef HAVE_STATUS_SET_BYTES
MPIR_Status_set_bytes(status, datatype, err);
#endif
*error_code = MPI_SUCCESS;
}
/*
* ADIOI_Sync_thread_start - start the synchronisation routine
*/
void *ADIOI_Sync_thread_start(void *ptr) {
ADIOI_Sync_thread_t t = (ADIOI_Sync_thread_t)ptr;
ADIOI_Atomic_queue_t q = (ADIOI_Atomic_queue_t)t->sub_;
ADIOI_Sync_req_t r;
size_t wr_count;
MPI_Count datatype_size;
char *buf;
ADIO_Offset bytes_xfered, len, buf_size, offset, off;
int type, count, fflags, error_code;
ADIO_Request *req;
MPI_Datatype datatype;
/* get sync buffer size */
t->fd_;
buf_size = t->fd_->hints->ind_wr_buffer_size;
buf = (char *)ADIOI_Malloc(buf_size);
for(;;) {
/* get a new sync request */
#ifndef _USE_PTHREAD_MUTEX_
if ((r = ADIOI_Atomic_queue_front(q)) == NULL)
continue;
#else
r = ADIOI_Atomic_queue_front(q);
#endif
/* pop sync request */
ADIOI_Atomic_queue_pop(q);
/* get request type */
ADIOI_Sync_req_get_key(r, ADIOI_SYNC_TYPE, &type);
/* check for shutdown type */
if (type == ADIOI_THREAD_SHUTDOWN) {
break;
}
/* if sync type get all the fields */
ADIOI_Sync_req_get_key(r, ADIOI_SYNC_ALL, &offset,
&datatype, &count, &req, &error_code, &fflags);
/* init I/O req */
MPI_Type_size_x(datatype, &datatype_size);
len = (ADIO_Offset)datatype_size * (ADIO_Offset)count;
bytes_xfered = 0;
off = offset;
/* satisfy sync req */
while (bytes_xfered < len) {
wr_count = (size_t)ADIOI_MIN(buf_size, len - bytes_xfered);
#ifdef ADIOI_MPE_LOGGING
MPE_Log_event(ADIOI_MPE_thread_read_a, 0, NULL);
#endif
/* read data from cache file */
pread(t->fd_->cache_fd->fd_sys, buf, wr_count, offset);
#ifdef ADIOI_MPE_LOGGING
MPE_Log_event(ADIOI_MPE_thread_read_b, 0, NULL);
MPE_Log_event(ADIOI_MPE_thread_write_a, 0, NULL);
#endif
/* write data to global file */
pwrite(t->fd_->fd_sys, buf, wr_count, offset);
#ifdef ADIOI_MPE_LOGGING
MPE_Log_event(ADIOI_MPE_thread_write_b, 0, NULL);
#endif
/* update offset */
bytes_xfered += (ADIO_Offset)wr_count;
offset += (ADIO_Offset)wr_count;
}
/* unlock extent locked in ADIO_WriteContig() */
if (t->fd_->hints->e10_cache_coherent == ADIOI_HINT_ENABLE)
ADIOI_UNLOCK(t->fd_, off, SEEK_SET, len);
/* ---Begin Error Handling--- */
/* --- End Error Handling --- */
/* complete Grequest */
MPI_Grequest_complete(*req);
}
ADIOI_Free(buf);
pthread_exit(NULL);
}
void ADIOI_GEN_ReadStrided_naive(ADIO_File fd, void *buf, int count,
MPI_Datatype buftype, int file_ptr_type,
ADIO_Offset offset, ADIO_Status *status, int
*error_code)
{
/* offset is in units of etype relative to the filetype. */
ADIOI_Flatlist_node *flat_buf, *flat_file;
int brd_size, frd_size=0, b_index;
int bufsize, size, sum, n_etypes_in_filetype, size_in_filetype;
int n_filetypes, etype_in_filetype;
ADIO_Offset abs_off_in_filetype=0;
int filetype_size, etype_size, buftype_size, req_len;
MPI_Aint filetype_extent, buftype_extent;
int buf_count, buftype_is_contig, filetype_is_contig;
ADIO_Offset userbuf_off;
ADIO_Offset off, req_off, disp, end_offset=0, start_off;
ADIO_Status status1;
*error_code = MPI_SUCCESS; /* changed below if error */
ADIOI_Datatype_iscontig(buftype, &buftype_is_contig);
ADIOI_Datatype_iscontig(fd->filetype, &filetype_is_contig);
MPI_Type_size(fd->filetype, &filetype_size);
if ( ! filetype_size ) {
*error_code = MPI_SUCCESS;
return;
}
MPI_Type_extent(fd->filetype, &filetype_extent);
MPI_Type_size(buftype, &buftype_size);
MPI_Type_extent(buftype, &buftype_extent);
etype_size = fd->etype_size;
bufsize = buftype_size * count;
/* contiguous in buftype and filetype is handled elsewhere */
if (!buftype_is_contig && filetype_is_contig) {
int b_count;
/* noncontiguous in memory, contiguous in file. */
ADIOI_Flatten_datatype(buftype);
flat_buf = ADIOI_Flatlist;
while (flat_buf->type != buftype) flat_buf = flat_buf->next;
off = (file_ptr_type == ADIO_INDIVIDUAL) ? fd->fp_ind :
fd->disp + etype_size * offset;
start_off = off;
end_offset = off + bufsize - 1;
/* if atomicity is true, lock (exclusive) the region to be accessed */
if ((fd->atomicity) && (fd->file_system != ADIO_PIOFS) &&
(fd->file_system != ADIO_PVFS))
{
ADIOI_WRITE_LOCK(fd, start_off, SEEK_SET, end_offset-start_off+1);
}
/* for each region in the buffer, grab the data and put it in
* place
*/
for (b_count=0; b_count < count; b_count++) {
for (b_index=0; b_index < flat_buf->count; b_index++) {
userbuf_off = b_count*buftype_extent +
flat_buf->indices[b_index];
req_off = off;
req_len = flat_buf->blocklens[b_index];
ADIO_ReadContig(fd,
(char *) buf + userbuf_off,
req_len,
MPI_BYTE,
ADIO_EXPLICIT_OFFSET,
req_off,
&status1,
error_code);
if (*error_code != MPI_SUCCESS) return;
/* off is (potentially) used to save the final offset later */
off += flat_buf->blocklens[b_index];
}
}
if ((fd->atomicity) && (fd->file_system != ADIO_PIOFS) &&
(fd->file_system != ADIO_PVFS))
{
ADIOI_UNLOCK(fd, start_off, SEEK_SET, end_offset-start_off+1);
}
if (file_ptr_type == ADIO_INDIVIDUAL) fd->fp_ind = off;
}
else { /* noncontiguous in file */
int f_index, st_frd_size, st_index = 0, st_n_filetypes;
int flag;
/* First we're going to calculate a set of values for use in all
* the noncontiguous in file cases:
* start_off - starting byte position of data in file
* end_offset - last byte offset to be acessed in the file
* st_n_filetypes - how far into the file we start in terms of
* whole filetypes
* st_index - index of block in first filetype that we will be
* starting in (?)
* st_frd_size - size of the data in the first filetype block
* that we will read (accounts for being part-way
* into reading this block of the filetype
*
*/
/* filetype already flattened in ADIO_Open */
flat_file = ADIOI_Flatlist;
while (flat_file->type != fd->filetype) flat_file = flat_file->next;
disp = fd->disp;
if (file_ptr_type == ADIO_INDIVIDUAL) {
start_off = fd->fp_ind; /* in bytes */
n_filetypes = -1;
flag = 0;
while (!flag) {
n_filetypes++;
for (f_index=0; f_index < flat_file->count; f_index++) {
if (disp + flat_file->indices[f_index] +
(ADIO_Offset) n_filetypes*filetype_extent +
flat_file->blocklens[f_index] >= start_off)
{
/* this block contains our starting position */
st_index = f_index;
frd_size = (int) (disp + flat_file->indices[f_index] +
(ADIO_Offset) n_filetypes*filetype_extent +
flat_file->blocklens[f_index] - start_off);
flag = 1;
break;
}
}
}
}
else {
n_etypes_in_filetype = filetype_size/etype_size;
n_filetypes = (int) (offset / n_etypes_in_filetype);
etype_in_filetype = (int) (offset % n_etypes_in_filetype);
size_in_filetype = etype_in_filetype * etype_size;
sum = 0;
for (f_index=0; f_index < flat_file->count; f_index++) {
sum += flat_file->blocklens[f_index];
if (sum > size_in_filetype) {
st_index = f_index;
frd_size = sum - size_in_filetype;
abs_off_in_filetype = flat_file->indices[f_index] +
size_in_filetype -
(sum - flat_file->blocklens[f_index]);
break;
}
}
/* abs. offset in bytes in the file */
start_off = disp + (ADIO_Offset) n_filetypes*filetype_extent +
abs_off_in_filetype;
}
st_frd_size = frd_size;
st_n_filetypes = n_filetypes;
/* start_off, st_n_filetypes, st_index, and st_frd_size are
* all calculated at this point
*/
/* Calculate end_offset, the last byte-offset that will be accessed.
* e.g., if start_off=0 and 100 bytes to be read, end_offset=99
*/
userbuf_off = 0;
f_index = st_index;
off = start_off;
frd_size = ADIOI_MIN(st_frd_size, bufsize);
while (userbuf_off < bufsize) {
userbuf_off += frd_size;
end_offset = off + frd_size - 1;
if (f_index < (flat_file->count - 1)) f_index++;
else {
f_index = 0;
n_filetypes++;
}
off = disp + flat_file->indices[f_index] +
(ADIO_Offset) n_filetypes*filetype_extent;
frd_size = ADIOI_MIN(flat_file->blocklens[f_index],
bufsize-(int)userbuf_off);
}
/* End of calculations. At this point the following values have
* been calculated and are ready for use:
* - start_off
* - end_offset
* - st_n_filetypes
* - st_index
* - st_frd_size
*/
/* if atomicity is true, lock (exclusive) the region to be accessed */
if ((fd->atomicity) && (fd->file_system != ADIO_PIOFS) &&
(fd->file_system != ADIO_PVFS))
{
ADIOI_WRITE_LOCK(fd, start_off, SEEK_SET, end_offset-start_off+1);
}
if (buftype_is_contig && !filetype_is_contig) {
/* contiguous in memory, noncontiguous in file. should be the
* most common case.
*/
userbuf_off = 0;
f_index = st_index;
off = start_off;
n_filetypes = st_n_filetypes;
frd_size = ADIOI_MIN(st_frd_size, bufsize);
/* while there is still space in the buffer, read more data */
while (userbuf_off < bufsize) {
if (frd_size) {
/* TYPE_UB and TYPE_LB can result in
frd_size = 0. save system call in such cases */
req_off = off;
req_len = frd_size;
ADIO_ReadContig(fd,
(char *) buf + userbuf_off,
req_len,
MPI_BYTE,
ADIO_EXPLICIT_OFFSET,
req_off,
&status1,
error_code);
if (*error_code != MPI_SUCCESS) return;
}
userbuf_off += frd_size;
if (off + frd_size < disp + flat_file->indices[f_index] +
flat_file->blocklens[f_index] +
(ADIO_Offset) n_filetypes*filetype_extent)
{
/* important that this value be correct, as it is
* used to set the offset in the fd near the end of
* this function.
*/
off += frd_size;
}
/* did not reach end of contiguous block in filetype.
* no more I/O needed. off is incremented by frd_size.
*/
else {
if (f_index < (flat_file->count - 1)) f_index++;
else {
f_index = 0;
n_filetypes++;
}
off = disp + flat_file->indices[f_index] +
(ADIO_Offset) n_filetypes*filetype_extent;
frd_size = ADIOI_MIN(flat_file->blocklens[f_index],
bufsize-(int)userbuf_off);
}
}
}
else {
int i, tmp_bufsize = 0;
/* noncontiguous in memory as well as in file */
ADIOI_Flatten_datatype(buftype);
flat_buf = ADIOI_Flatlist;
while (flat_buf->type != buftype) flat_buf = flat_buf->next;
b_index = buf_count = 0;
i = (int) (flat_buf->indices[0]);
f_index = st_index;
off = start_off;
n_filetypes = st_n_filetypes;
frd_size = st_frd_size;
brd_size = flat_buf->blocklens[0];
/* while we haven't read size * count bytes, keep going */
while (tmp_bufsize < bufsize) {
int new_brd_size = brd_size, new_frd_size = frd_size;
size = ADIOI_MIN(frd_size, brd_size);
if (size) {
req_off = off;
req_len = size;
userbuf_off = i;
ADIO_ReadContig(fd,
(char *) buf + userbuf_off,
req_len,
MPI_BYTE,
ADIO_EXPLICIT_OFFSET,
req_off,
&status1,
error_code);
if (*error_code != MPI_SUCCESS) return;
}
if (size == frd_size) {
/* reached end of contiguous block in file */
if (f_index < (flat_file->count - 1)) f_index++;
else {
f_index = 0;
n_filetypes++;
}
off = disp + flat_file->indices[f_index] +
(ADIO_Offset) n_filetypes*filetype_extent;
new_frd_size = flat_file->blocklens[f_index];
if (size != brd_size) {
i += size;
new_brd_size -= size;
}
}
if (size == brd_size) {
/* reached end of contiguous block in memory */
b_index = (b_index + 1)%flat_buf->count;
buf_count++;
i = (int) (buftype_extent*(buf_count/flat_buf->count) +
flat_buf->indices[b_index]);
new_brd_size = flat_buf->blocklens[b_index];
if (size != frd_size) {
off += size;
new_frd_size -= size;
}
}
tmp_bufsize += size;
frd_size = new_frd_size;
brd_size = new_brd_size;
}
}
/* unlock the file region if we locked it */
if ((fd->atomicity) && (fd->file_system != ADIO_PIOFS) &&
(fd->file_system != ADIO_PVFS))
{
ADIOI_UNLOCK(fd, start_off, SEEK_SET, end_offset-start_off+1);
}
if (file_ptr_type == ADIO_INDIVIDUAL) fd->fp_ind = off;
} /* end of (else noncontiguous in file) */
fd->fp_sys_posn = -1; /* mark it as invalid. */
#ifdef HAVE_STATUS_SET_BYTES
MPIR_Status_set_bytes(status, buftype, bufsize);
/* This is a temporary way of filling in status. The right way is to
* keep track of how much data was actually read and placed in buf
*/
#endif
if (!buftype_is_contig) ADIOI_Delete_flattened(buftype);
}
void ADIOI_NFS_Get_shared_fp(ADIO_File fd, int incr, ADIO_Offset *shared_fp,
int *error_code)
{
ADIO_Offset new_fp;
int err;
MPI_Comm dupcommself;
static char myname[] = "ADIOI_NFS_GET_SHARED_FP";
if (fd->shared_fp_fd == ADIO_FILE_NULL) {
MPI_Comm_dup(MPI_COMM_SELF, &dupcommself);
fd->shared_fp_fd = ADIO_Open(MPI_COMM_SELF, dupcommself,
fd->shared_fp_fname,
fd->file_system,
fd->fns,
ADIO_CREATE | ADIO_RDWR | ADIO_DELETE_ON_CLOSE,
0, MPI_BYTE, MPI_BYTE, MPI_INFO_NULL,
ADIO_PERM_NULL, error_code);
if (*error_code != MPI_SUCCESS) return;
*shared_fp = 0;
ADIOI_WRITE_LOCK(fd->shared_fp_fd, 0, SEEK_SET, sizeof(ADIO_Offset));
#ifdef ADIOI_MPE_LOGGING
MPE_Log_event( ADIOI_MPE_read_a, 0, NULL );
#endif
err = read(fd->shared_fp_fd->fd_sys, shared_fp, sizeof(ADIO_Offset));
#ifdef ADIOI_MPE_LOGGING
MPE_Log_event( ADIOI_MPE_read_b, 0, NULL );
#endif
/* if the file is empty, the above read may return error
(reading beyond end of file). In that case, shared_fp = 0,
set above, is the correct value. */
}
else {
ADIOI_WRITE_LOCK(fd->shared_fp_fd, 0, SEEK_SET, sizeof(ADIO_Offset));
#ifdef ADIOI_MPE_LOGGING
MPE_Log_event( ADIOI_MPE_lseek_a, 0, NULL );
#endif
err = lseek(fd->shared_fp_fd->fd_sys, 0, SEEK_SET);
#ifdef ADIOI_MPE_LOGGING
MPE_Log_event( ADIOI_MPE_lseek_b, 0, NULL );
#endif
if (err == 0) {
#ifdef ADIOI_MPE_LOGGING
MPE_Log_event( ADIOI_MPE_read_a, 0, NULL );
#endif
err = read(fd->shared_fp_fd->fd_sys, shared_fp,
sizeof(ADIO_Offset));
#ifdef ADIOI_MPE_LOGGING
MPE_Log_event( ADIOI_MPE_read_b, 0, NULL );
#endif
}
if (err == -1) {
ADIOI_UNLOCK(fd->shared_fp_fd, 0, SEEK_SET, sizeof(ADIO_Offset));
*error_code = MPIO_Err_create_code(MPI_SUCCESS,
MPIR_ERR_RECOVERABLE, myname,
__LINE__, MPI_ERR_IO, "**io",
"**io %s", strerror(errno));
return;
}
}
if (incr == 0) {goto done;}
new_fp = *shared_fp + incr;
#ifdef ADIOI_MPE_LOGGING
MPE_Log_event( ADIOI_MPE_lseek_a, 0, NULL );
#endif
err = lseek(fd->shared_fp_fd->fd_sys, 0, SEEK_SET);
#ifdef ADIOI_MPE_LOGGING
MPE_Log_event( ADIOI_MPE_lseek_b, 0, NULL );
#endif
if (err == 0) {
#ifdef ADIOI_MPE_LOGGING
MPE_Log_event( ADIOI_MPE_write_a, 0, NULL );
#endif
err = write(fd->shared_fp_fd->fd_sys, &new_fp, sizeof(ADIO_Offset));
#ifdef ADIOI_MPE_LOGGING
MPE_Log_event( ADIOI_MPE_write_b, 0, NULL );
#endif
}
done:
ADIOI_UNLOCK(fd->shared_fp_fd, 0, SEEK_SET, sizeof(ADIO_Offset));
if (err == -1) {
*error_code = MPIO_Err_create_code(MPI_SUCCESS, MPIR_ERR_RECOVERABLE,
myname, __LINE__, MPI_ERR_IO,
"**io",
"**io %s", strerror(errno));
}
else *error_code = MPI_SUCCESS;
}
/*@
MPI_File_write_shared - Write using shared file pointer
Input Parameters:
. fh - file handle (handle)
. buf - initial address of buffer (choice)
. count - number of elements in buffer (nonnegative integer)
. datatype - datatype of each buffer element (handle)
Output Parameters:
. status - status object (Status)
.N fortran
@*/
int MPI_File_write_shared(MPI_File mpi_fh, void *buf, int count,
MPI_Datatype datatype, MPI_Status *status)
{
int error_code, bufsize, buftype_is_contig, filetype_is_contig;
static char myname[] = "MPI_FILE_READ_SHARED";
int datatype_size, incr;
ADIO_Offset off, shared_fp;
ADIO_File fh;
MPIU_THREAD_SINGLE_CS_ENTER("io");
MPIR_Nest_incr();
fh = MPIO_File_resolve(mpi_fh);
/* --BEGIN ERROR HANDLING-- */
MPIO_CHECK_FILE_HANDLE(fh, myname, error_code);
MPIO_CHECK_COUNT(fh, count, myname, error_code);
MPIO_CHECK_DATATYPE(fh, datatype, myname, error_code);
/* --END ERROR HANDLING-- */
MPI_Type_size(datatype, &datatype_size);
if (count*datatype_size == 0) {
#ifdef HAVE_STATUS_SET_BYTES
MPIR_Status_set_bytes(status, datatype, 0);
#endif
error_code = MPI_SUCCESS;
goto fn_exit;
}
/* --BEGIN ERROR HANDLING-- */
MPIO_CHECK_INTEGRAL_ETYPE(fh, count, datatype_size, myname, error_code);
MPIO_CHECK_FS_SUPPORTS_SHARED(fh, myname, error_code);
/* --END ERROR HANDLING-- */
ADIOI_Datatype_iscontig(datatype, &buftype_is_contig);
ADIOI_Datatype_iscontig(fh->filetype, &filetype_is_contig);
ADIOI_TEST_DEFERRED(fh, myname, &error_code);
incr = (count*datatype_size)/fh->etype_size;
ADIO_Get_shared_fp(fh, incr, &shared_fp, &error_code);
/* --BEGIN ERROR HANDLING-- */
if (error_code != MPI_SUCCESS)
{
error_code = MPIO_Err_create_code(MPI_SUCCESS, MPIR_ERR_FATAL,
myname, __LINE__, MPI_ERR_INTERN,
"**iosharedfailed", 0);
error_code = MPIO_Err_return_file(fh, error_code);
goto fn_exit;
}
/* --END ERROR HANDLING-- */
if (buftype_is_contig && filetype_is_contig)
{
/* convert bufocunt and shared_fp to bytes */
bufsize = datatype_size * count;
off = fh->disp + fh->etype_size * shared_fp;
/* if atomic mode requested, lock (exclusive) the region, because there
could be a concurrent noncontiguous request. On NFS, locking is
done in the ADIO_WriteContig.*/
if ((fh->atomicity) && (fh->file_system != ADIO_NFS))
ADIOI_WRITE_LOCK(fh, off, SEEK_SET, bufsize);
ADIO_WriteContig(fh, buf, count, datatype, ADIO_EXPLICIT_OFFSET,
off, status, &error_code);
if ((fh->atomicity) && (fh->file_system != ADIO_NFS))
ADIOI_UNLOCK(fh, off, SEEK_SET, bufsize);
}
else
{
ADIO_WriteStrided(fh, buf, count, datatype, ADIO_EXPLICIT_OFFSET,
shared_fp, status, &error_code);
/* For strided and atomic mode, locking is done in ADIO_WriteStrided */
}
/* --BEGIN ERROR HANDLING-- */
if (error_code != MPI_SUCCESS)
error_code = MPIO_Err_return_file(fh, error_code);
/* --END ERROR HANDLING-- */
fn_exit:
MPIR_Nest_decr();
MPIU_THREAD_SINGLE_CS_EXIT("io");
return error_code;
}
void ADIOI_GEN_ReadStrided(ADIO_File fd, void *buf, int count,
MPI_Datatype datatype, int file_ptr_type,
ADIO_Offset offset, ADIO_Status *status, int
*error_code)
{
/* offset is in units of etype relative to the filetype. */
ADIOI_Flatlist_node *flat_buf, *flat_file;
int i, j, k, brd_size, frd_size=0, st_index=0;
int bufsize, num, size, sum, n_etypes_in_filetype, size_in_filetype;
int n_filetypes, etype_in_filetype;
ADIO_Offset abs_off_in_filetype=0;
int filetype_size, etype_size, buftype_size, req_len, partial_read;
MPI_Aint filetype_extent, buftype_extent;
int buf_count, buftype_is_contig, filetype_is_contig;
ADIO_Offset userbuf_off;
ADIO_Offset off, req_off, disp, end_offset=0, readbuf_off, start_off;
char *readbuf, *tmp_buf, *value;
int flag, st_frd_size, st_n_filetypes, readbuf_len;
int new_brd_size, new_frd_size, info_flag, max_bufsize;
ADIO_Status status1;
if (fd->hints->ds_read == ADIOI_HINT_DISABLE) {
/* if user has disabled data sieving on reads, use naive
* approach instead.
*/
ADIOI_GEN_ReadStrided_naive(fd,
buf,
count,
datatype,
file_ptr_type,
offset,
status,
error_code);
return;
}
*error_code = MPI_SUCCESS; /* changed below if error */
ADIOI_Datatype_iscontig(datatype, &buftype_is_contig);
ADIOI_Datatype_iscontig(fd->filetype, &filetype_is_contig);
MPI_Type_size(fd->filetype, &filetype_size);
if ( ! filetype_size ) {
*error_code = MPI_SUCCESS;
return;
}
MPI_Type_extent(fd->filetype, &filetype_extent);
MPI_Type_size(datatype, &buftype_size);
MPI_Type_extent(datatype, &buftype_extent);
etype_size = fd->etype_size;
bufsize = buftype_size * count;
/* get max_bufsize from the info object. */
value = (char *) ADIOI_Malloc((MPI_MAX_INFO_VAL+1)*sizeof(char));
MPI_Info_get(fd->info, "ind_rd_buffer_size", MPI_MAX_INFO_VAL, value,
&info_flag);
max_bufsize = atoi(value);
ADIOI_Free(value);
if (!buftype_is_contig && filetype_is_contig) {
/* noncontiguous in memory, contiguous in file. */
ADIOI_Flatten_datatype(datatype);
flat_buf = ADIOI_Flatlist;
while (flat_buf->type != datatype) flat_buf = flat_buf->next;
off = (file_ptr_type == ADIO_INDIVIDUAL) ? fd->fp_ind :
fd->disp + etype_size * offset;
start_off = off;
end_offset = off + bufsize - 1;
readbuf_off = off;
readbuf = (char *) ADIOI_Malloc(max_bufsize);
readbuf_len = (int) (ADIOI_MIN(max_bufsize, end_offset-readbuf_off+1));
/* if atomicity is true, lock (exclusive) the region to be accessed */
if ((fd->atomicity) && (fd->file_system != ADIO_PIOFS) && (fd->file_system != ADIO_PVFS))
ADIOI_WRITE_LOCK(fd, start_off, SEEK_SET, end_offset-start_off+1);
ADIO_ReadContig(fd, readbuf, readbuf_len, MPI_BYTE,
ADIO_EXPLICIT_OFFSET, readbuf_off, &status1, error_code);
if (*error_code != MPI_SUCCESS) return;
for (j=0; j<count; j++)
for (i=0; i<flat_buf->count; i++) {
userbuf_off = j*buftype_extent + flat_buf->indices[i];
req_off = off;
req_len = flat_buf->blocklens[i];
ADIOI_BUFFERED_READ
off += flat_buf->blocklens[i];
}
if ((fd->atomicity) && (fd->file_system != ADIO_PIOFS) && (fd->file_system != ADIO_PVFS))
ADIOI_UNLOCK(fd, start_off, SEEK_SET, end_offset-start_off+1);
if (file_ptr_type == ADIO_INDIVIDUAL) fd->fp_ind = off;
ADIOI_Free(readbuf);
}
else { /* noncontiguous in file */
/* filetype already flattened in ADIO_Open */
flat_file = ADIOI_Flatlist;
while (flat_file->type != fd->filetype) flat_file = flat_file->next;
disp = fd->disp;
if (file_ptr_type == ADIO_INDIVIDUAL) {
offset = fd->fp_ind; /* in bytes */
n_filetypes = -1;
flag = 0;
while (!flag) {
n_filetypes++;
for (i=0; i<flat_file->count; i++) {
if (disp + flat_file->indices[i] +
(ADIO_Offset) n_filetypes*filetype_extent + flat_file->blocklens[i]
>= offset) {
st_index = i;
frd_size = (int) (disp + flat_file->indices[i] +
(ADIO_Offset) n_filetypes*filetype_extent
+ flat_file->blocklens[i] - offset);
flag = 1;
break;
}
}
}
}
else {
n_etypes_in_filetype = filetype_size/etype_size;
n_filetypes = (int) (offset / n_etypes_in_filetype);
etype_in_filetype = (int) (offset % n_etypes_in_filetype);
size_in_filetype = etype_in_filetype * etype_size;
sum = 0;
for (i=0; i<flat_file->count; i++) {
sum += flat_file->blocklens[i];
if (sum > size_in_filetype) {
st_index = i;
frd_size = sum - size_in_filetype;
abs_off_in_filetype = flat_file->indices[i] +
size_in_filetype - (sum - flat_file->blocklens[i]);
break;
}
}
/* abs. offset in bytes in the file */
offset = disp + (ADIO_Offset) n_filetypes*filetype_extent + abs_off_in_filetype;
}
start_off = offset;
/* Calculate end_offset, the last byte-offset that will be accessed.
e.g., if start_offset=0 and 100 bytes to be read, end_offset=99*/
st_frd_size = frd_size;
st_n_filetypes = n_filetypes;
i = 0;
j = st_index;
off = offset;
frd_size = ADIOI_MIN(st_frd_size, bufsize);
while (i < bufsize) {
i += frd_size;
end_offset = off + frd_size - 1;
if (j < (flat_file->count - 1)) j++;
else {
j = 0;
n_filetypes++;
}
off = disp + flat_file->indices[j] + (ADIO_Offset) n_filetypes*filetype_extent;
frd_size = ADIOI_MIN(flat_file->blocklens[j], bufsize-i);
}
/* if atomicity is true, lock (exclusive) the region to be accessed */
if ((fd->atomicity) && (fd->file_system != ADIO_PIOFS) && (fd->file_system != ADIO_PVFS))
ADIOI_WRITE_LOCK(fd, start_off, SEEK_SET, end_offset-start_off+1);
readbuf_off = 0;
readbuf_len = 0;
readbuf = (char *) ADIOI_Malloc(max_bufsize);
if (buftype_is_contig && !filetype_is_contig) {
/* contiguous in memory, noncontiguous in file. should be the most
common case. */
i = 0;
j = st_index;
off = offset;
n_filetypes = st_n_filetypes;
frd_size = ADIOI_MIN(st_frd_size, bufsize);
while (i < bufsize) {
if (frd_size) {
/* TYPE_UB and TYPE_LB can result in
frd_size = 0. save system call in such cases */
/* lseek(fd->fd_sys, off, SEEK_SET);
err = read(fd->fd_sys, ((char *) buf) + i, frd_size);*/
req_off = off;
req_len = frd_size;
userbuf_off = i;
ADIOI_BUFFERED_READ
}
i += frd_size;
if (off + frd_size < disp + flat_file->indices[j] +
flat_file->blocklens[j] + (ADIO_Offset) n_filetypes*filetype_extent)
off += frd_size;
/* did not reach end of contiguous block in filetype.
no more I/O needed. off is incremented by frd_size. */
else {
if (j < (flat_file->count - 1)) j++;
else {
j = 0;
n_filetypes++;
}
off = disp + flat_file->indices[j] +
(ADIO_Offset) n_filetypes*filetype_extent;
frd_size = ADIOI_MIN(flat_file->blocklens[j], bufsize-i);
}
}
}
else {
int MPIOI_File_iwrite(MPI_File mpi_fh,
MPI_Offset offset,
int file_ptr_type,
void *buf,
int count,
MPI_Datatype datatype,
char *myname,
MPI_Request *request)
{
int error_code, bufsize, buftype_is_contig, filetype_is_contig;
int datatype_size;
ADIO_Status status;
ADIO_Offset off;
ADIO_File fh;
MPI_Offset nbytes=0;
fh = MPIO_File_resolve(mpi_fh);
/* --BEGIN ERROR HANDLING-- */
MPIO_CHECK_FILE_HANDLE(fh, myname, error_code);
MPIO_CHECK_COUNT(fh, count, myname, error_code);
MPIO_CHECK_DATATYPE(fh, datatype, myname, error_code);
if (file_ptr_type == ADIO_EXPLICIT_OFFSET && offset < 0) {
error_code = MPIO_Err_create_code(MPI_SUCCESS, MPIR_ERR_RECOVERABLE,
myname, __LINE__, MPI_ERR_ARG,
"**iobadoffset", 0);
error_code = MPIO_Err_return_file(fh, error_code);
goto fn_exit;
}
/* --END ERROR HANDLING-- */
MPI_Type_size(datatype, &datatype_size);
/* --BEGIN ERROR HANDLING-- */
MPIO_CHECK_INTEGRAL_ETYPE(fh, count, datatype_size, myname, error_code);
MPIO_CHECK_WRITABLE(fh, myname, error_code);
MPIO_CHECK_NOT_SEQUENTIAL_MODE(fh, myname, error_code);
MPIO_CHECK_COUNT_SIZE(fh, count, datatype_size, myname, error_code);
/* --END ERROR HANDLING-- */
ADIOI_Datatype_iscontig(datatype, &buftype_is_contig);
ADIOI_Datatype_iscontig(fh->filetype, &filetype_is_contig);
ADIOI_TEST_DEFERRED(fh, myname, &error_code);
if (buftype_is_contig && filetype_is_contig) {
/* convert sizes to bytes */
bufsize = datatype_size * count;
if (file_ptr_type == ADIO_EXPLICIT_OFFSET) {
off = fh->disp + fh->etype_size * offset;
}
else {
off = fh->fp_ind;
}
if (!(fh->atomicity)) {
ADIO_IwriteContig(fh, buf, count, datatype, file_ptr_type,
off, request, &error_code);
}
else {
/* to maintain strict atomicity semantics with other concurrent
operations, lock (exclusive) and call blocking routine */
if (ADIO_Feature(fh, ADIO_LOCKS) )
{
ADIOI_WRITE_LOCK(fh, off, SEEK_SET, bufsize);
}
ADIO_WriteContig(fh, buf, count, datatype, file_ptr_type, off,
&status, &error_code);
if (ADIO_Feature(fh, ADIO_LOCKS) )
{
ADIOI_UNLOCK(fh, off, SEEK_SET, bufsize);
}
if (error_code == MPI_SUCCESS) {
nbytes = count * datatype_size;
}
MPIO_Completed_request_create(&fh, nbytes, &error_code, request);
}
}
else {
ADIO_IwriteStrided(fh, buf, count, datatype, file_ptr_type,
offset, request, &error_code);
}
fn_exit:
return error_code;
}
void ADIOI_NFS_WriteStrided(ADIO_File fd, void *buf, int count,
MPI_Datatype datatype, int file_ptr_type,
ADIO_Offset offset, ADIO_Status *status, int
*error_code)
{
/* offset is in units of etype relative to the filetype. */
ADIOI_Flatlist_node *flat_buf, *flat_file;
int i, j, k, err=-1, bwr_size, fwr_size=0, st_index=0;
int bufsize, num, size, sum, n_etypes_in_filetype, size_in_filetype;
int n_filetypes, etype_in_filetype;
ADIO_Offset abs_off_in_filetype=0;
int filetype_size, etype_size, buftype_size, req_len;
MPI_Aint filetype_extent, buftype_extent;
int buf_count, buftype_is_contig, filetype_is_contig;
ADIO_Offset userbuf_off;
ADIO_Offset off, req_off, disp, end_offset=0, writebuf_off, start_off;
char *writebuf, *value;
int flag, st_fwr_size, st_n_filetypes, writebuf_len, write_sz;
int new_bwr_size, new_fwr_size, err_flag=0, info_flag, max_bufsize;
static char myname[] = "ADIOI_NFS_WRITESTRIDED";
ADIOI_Datatype_iscontig(datatype, &buftype_is_contig);
ADIOI_Datatype_iscontig(fd->filetype, &filetype_is_contig);
MPI_Type_size(fd->filetype, &filetype_size);
if ( ! filetype_size ) {
*error_code = MPI_SUCCESS;
return;
}
MPI_Type_extent(fd->filetype, &filetype_extent);
MPI_Type_size(datatype, &buftype_size);
MPI_Type_extent(datatype, &buftype_extent);
etype_size = fd->etype_size;
bufsize = buftype_size * count;
/* get max_bufsize from the info object. */
value = (char *) ADIOI_Malloc((MPI_MAX_INFO_VAL+1)*sizeof(char));
MPI_Info_get(fd->info, "ind_wr_buffer_size", MPI_MAX_INFO_VAL, value,
&info_flag);
max_bufsize = atoi(value);
ADIOI_Free(value);
if (!buftype_is_contig && filetype_is_contig) {
/* noncontiguous in memory, contiguous in file. */
ADIOI_Flatten_datatype(datatype);
flat_buf = ADIOI_Flatlist;
while (flat_buf->type != datatype) flat_buf = flat_buf->next;
off = (file_ptr_type == ADIO_INDIVIDUAL) ? fd->fp_ind :
fd->disp + etype_size * offset;
start_off = off;
end_offset = off + bufsize - 1;
writebuf_off = off;
writebuf = (char *) ADIOI_Malloc(max_bufsize);
writebuf_len = (int) (ADIOI_MIN(max_bufsize,end_offset-writebuf_off+1));
/* if atomicity is true, lock the region to be accessed */
if (fd->atomicity)
ADIOI_WRITE_LOCK(fd, start_off, SEEK_SET, end_offset-start_off+1);
for (j=0; j<count; j++)
for (i=0; i<flat_buf->count; i++) {
userbuf_off = j*buftype_extent + flat_buf->indices[i];
req_off = off;
req_len = flat_buf->blocklens[i];
ADIOI_BUFFERED_WRITE_WITHOUT_READ
off += flat_buf->blocklens[i];
}
/* write the buffer out finally */
lseek(fd->fd_sys, writebuf_off, SEEK_SET);
if (!(fd->atomicity)) ADIOI_WRITE_LOCK(fd, writebuf_off, SEEK_SET, writebuf_len);
err = write(fd->fd_sys, writebuf, writebuf_len);
if (!(fd->atomicity)) ADIOI_UNLOCK(fd, writebuf_off, SEEK_SET, writebuf_len);
if (err == -1) err_flag = 1;
if (fd->atomicity)
ADIOI_UNLOCK(fd, start_off, SEEK_SET, end_offset-start_off+1);
ADIOI_Free(writebuf); /* malloced in the buffered_write macro */
if (file_ptr_type == ADIO_INDIVIDUAL) fd->fp_ind = off;
if (err_flag) {
*error_code = MPIO_Err_create_code(MPI_SUCCESS,
MPIR_ERR_RECOVERABLE, myname,
__LINE__, MPI_ERR_IO, "**io",
"**io %s", strerror(errno));
}
else *error_code = MPI_SUCCESS;
}
else { /* noncontiguous in file */
/* filetype already flattened in ADIO_Open */
flat_file = ADIOI_Flatlist;
while (flat_file->type != fd->filetype) flat_file = flat_file->next;
disp = fd->disp;
if (file_ptr_type == ADIO_INDIVIDUAL) {
offset = fd->fp_ind; /* in bytes */
n_filetypes = -1;
flag = 0;
while (!flag) {
n_filetypes++;
for (i=0; i<flat_file->count; i++) {
if (disp + flat_file->indices[i] +
(ADIO_Offset) n_filetypes*filetype_extent + flat_file->blocklens[i]
>= offset) {
st_index = i;
fwr_size = (int) (disp + flat_file->indices[i] +
(ADIO_Offset) n_filetypes*filetype_extent
+ flat_file->blocklens[i] - offset);
flag = 1;
break;
}
}
}
}
else {
n_etypes_in_filetype = filetype_size/etype_size;
n_filetypes = (int) (offset / n_etypes_in_filetype);
etype_in_filetype = (int) (offset % n_etypes_in_filetype);
size_in_filetype = etype_in_filetype * etype_size;
sum = 0;
for (i=0; i<flat_file->count; i++) {
sum += flat_file->blocklens[i];
if (sum > size_in_filetype) {
st_index = i;
fwr_size = sum - size_in_filetype;
abs_off_in_filetype = flat_file->indices[i] +
size_in_filetype - (sum - flat_file->blocklens[i]);
break;
}
}
/* abs. offset in bytes in the file */
offset = disp + (ADIO_Offset) n_filetypes*filetype_extent + abs_off_in_filetype;
}
start_off = offset;
/* Calculate end_offset, the last byte-offset that will be accessed.
e.g., if start_offset=0 and 100 bytes to be write, end_offset=99*/
st_fwr_size = fwr_size;
st_n_filetypes = n_filetypes;
i = 0;
j = st_index;
off = offset;
fwr_size = ADIOI_MIN(st_fwr_size, bufsize);
while (i < bufsize) {
i += fwr_size;
end_offset = off + fwr_size - 1;
if (j < (flat_file->count - 1)) j++;
else {
j = 0;
n_filetypes++;
}
off = disp + flat_file->indices[j] + (ADIO_Offset) n_filetypes*filetype_extent;
fwr_size = ADIOI_MIN(flat_file->blocklens[j], bufsize-i);
}
/* if atomicity is true, lock the region to be accessed */
if (fd->atomicity)
ADIOI_WRITE_LOCK(fd, start_off, SEEK_SET, end_offset-start_off+1);
/* initial read for the read-modify-write */
writebuf_off = offset;
writebuf = (char *) ADIOI_Malloc(max_bufsize);
writebuf_len = (int)(ADIOI_MIN(max_bufsize,end_offset-writebuf_off+1));
if (!(fd->atomicity)) ADIOI_WRITE_LOCK(fd, writebuf_off, SEEK_SET, writebuf_len);
lseek(fd->fd_sys, writebuf_off, SEEK_SET);
err = read(fd->fd_sys, writebuf, writebuf_len);
if (err == -1) {
*error_code = MPIO_Err_create_code(MPI_SUCCESS,
MPIR_ERR_RECOVERABLE,
myname, __LINE__,
MPI_ERR_IO,
"ADIOI_NFS_WriteStrided: ROMIO tries to optimize this access by doing a read-modify-write, but is unable to read the file. Please give the file read permission and open it with MPI_MODE_RDWR.", 0);
return;
}
if (buftype_is_contig && !filetype_is_contig) {
/* contiguous in memory, noncontiguous in file. should be the most
common case. */
i = 0;
j = st_index;
off = offset;
n_filetypes = st_n_filetypes;
fwr_size = ADIOI_MIN(st_fwr_size, bufsize);
while (i < bufsize) {
if (fwr_size) {
/* TYPE_UB and TYPE_LB can result in
fwr_size = 0. save system call in such cases */
/* lseek(fd->fd_sys, off, SEEK_SET);
err = write(fd->fd_sys, ((char *) buf) + i, fwr_size);*/
req_off = off;
req_len = fwr_size;
userbuf_off = i;
ADIOI_BUFFERED_WRITE
}
i += fwr_size;
if (off + fwr_size < disp + flat_file->indices[j] +
flat_file->blocklens[j] + (ADIO_Offset) n_filetypes*filetype_extent)
off += fwr_size;
/* did not reach end of contiguous block in filetype.
no more I/O needed. off is incremented by fwr_size. */
else {
if (j < (flat_file->count - 1)) j++;
else {
j = 0;
n_filetypes++;
}
off = disp + flat_file->indices[j] +
(ADIO_Offset) n_filetypes*filetype_extent;
fwr_size = ADIOI_MIN(flat_file->blocklens[j], bufsize-i);
}
}
}
else {
void ADIOI_NFS_ReadStrided(ADIO_File fd, void *buf, int count,
MPI_Datatype datatype, int file_ptr_type,
ADIO_Offset offset, ADIO_Status *status, int
*error_code)
{
/* offset is in units of etype relative to the filetype. */
ADIOI_Flatlist_node *flat_buf, *flat_file;
int i, j, k, err=-1, brd_size, st_index=0;
int num, size, sum, n_etypes_in_filetype, size_in_filetype;
MPI_Count bufsize;
int n_filetypes, etype_in_filetype;
ADIO_Offset abs_off_in_filetype=0;
int req_len, partial_read;
MPI_Count filetype_size, etype_size, buftype_size;
MPI_Aint filetype_extent, buftype_extent;
int buf_count, buftype_is_contig, filetype_is_contig;
ADIO_Offset userbuf_off;
ADIO_Offset off, req_off, disp, end_offset=0, readbuf_off, start_off;
char *readbuf, *tmp_buf, *value;
int st_n_filetypes, readbuf_len;
ADIO_Offset frd_size=0, new_frd_size, st_frd_size;
int new_brd_size, err_flag=0, info_flag, max_bufsize;
static char myname[] = "ADIOI_NFS_READSTRIDED";
ADIOI_Datatype_iscontig(datatype, &buftype_is_contig);
ADIOI_Datatype_iscontig(fd->filetype, &filetype_is_contig);
MPI_Type_size_x(fd->filetype, &filetype_size);
if ( ! filetype_size ) {
#ifdef HAVE_STATUS_SET_BYTES
MPIR_Status_set_bytes(status, datatype, 0);
#endif
*error_code = MPI_SUCCESS;
return;
}
MPI_Type_extent(fd->filetype, &filetype_extent);
MPI_Type_size_x(datatype, &buftype_size);
MPI_Type_extent(datatype, &buftype_extent);
etype_size = fd->etype_size;
bufsize = buftype_size * count;
/* get max_bufsize from the info object. */
value = (char *) ADIOI_Malloc((MPI_MAX_INFO_VAL+1)*sizeof(char));
ADIOI_Info_get(fd->info, "ind_rd_buffer_size", MPI_MAX_INFO_VAL, value,
&info_flag);
max_bufsize = atoi(value);
ADIOI_Free(value);
if (!buftype_is_contig && filetype_is_contig) {
/* noncontiguous in memory, contiguous in file. */
ADIOI_Flatten_datatype(datatype);
flat_buf = ADIOI_Flatlist;
while (flat_buf->type != datatype) flat_buf = flat_buf->next;
off = (file_ptr_type == ADIO_INDIVIDUAL) ? fd->fp_ind :
fd->disp + etype_size * offset;
start_off = off;
end_offset = off + bufsize - 1;
readbuf_off = off;
readbuf = (char *) ADIOI_Malloc(max_bufsize);
readbuf_len = (int) (ADIOI_MIN(max_bufsize, end_offset-readbuf_off+1));
/* if atomicity is true, lock (exclusive) the region to be accessed */
if (fd->atomicity)
ADIOI_WRITE_LOCK(fd, start_off, SEEK_SET, end_offset-start_off+1);
#ifdef ADIOI_MPE_LOGGING
MPE_Log_event( ADIOI_MPE_lseek_a, 0, NULL );
#endif
lseek(fd->fd_sys, readbuf_off, SEEK_SET);
#ifdef ADIOI_MPE_LOGGING
MPE_Log_event( ADIOI_MPE_lseek_b, 0, NULL );
#endif
if (!(fd->atomicity)) ADIOI_READ_LOCK(fd, readbuf_off, SEEK_SET, readbuf_len);
#ifdef ADIOI_MPE_LOGGING
MPE_Log_event( ADIOI_MPE_read_a, 0, NULL );
#endif
err = read(fd->fd_sys, readbuf, readbuf_len);
#ifdef ADIOI_MPE_LOGGING
MPE_Log_event( ADIOI_MPE_read_b, 0, NULL );
#endif
if (!(fd->atomicity)) ADIOI_UNLOCK(fd, readbuf_off, SEEK_SET, readbuf_len);
if (err == -1) err_flag = 1;
for (j=0; j<count; j++)
for (i=0; i<flat_buf->count; i++) {
userbuf_off = j*buftype_extent + flat_buf->indices[i];
req_off = off;
req_len = flat_buf->blocklens[i];
ADIOI_BUFFERED_READ
off += flat_buf->blocklens[i];
}
if (fd->atomicity)
ADIOI_UNLOCK(fd, start_off, SEEK_SET, end_offset-start_off+1);
if (file_ptr_type == ADIO_INDIVIDUAL) fd->fp_ind = off;
ADIOI_Free(readbuf); /* malloced in the buffered_read macro */
if (err_flag) {
*error_code = MPIO_Err_create_code(MPI_SUCCESS,
MPIR_ERR_RECOVERABLE, myname,
__LINE__, MPI_ERR_IO, "**io",
"**io %s", strerror(errno));
}
else *error_code = MPI_SUCCESS;
}
else { /* noncontiguous in file */
/* filetype already flattened in ADIO_Open */
flat_file = ADIOI_Flatlist;
while (flat_file->type != fd->filetype) flat_file = flat_file->next;
disp = fd->disp;
if (file_ptr_type == ADIO_INDIVIDUAL) {
/* Wei-keng reworked type processing to be a bit more efficient */
offset = fd->fp_ind - disp;
n_filetypes = (offset - flat_file->indices[0]) / filetype_extent;
offset -= (ADIO_Offset)n_filetypes * filetype_extent;
/* now offset is local to this extent */
/* find the block where offset is located, skip blocklens[i]==0 */
for (i=0; i<flat_file->count; i++) {
ADIO_Offset dist;
if (flat_file->blocklens[i] == 0) continue;
dist = flat_file->indices[i] + flat_file->blocklens[i] - offset;
/* frd_size is from offset to the end of block i */
if (dist == 0) {
i++;
offset = flat_file->indices[i];
frd_size = flat_file->blocklens[i];
break;
}
if (dist > 0 ) {
frd_size = dist;
break;
}
}
st_index = i; /* starting index in flat_file->indices[] */
offset += disp + (ADIO_Offset)n_filetypes*filetype_extent;
}
else {
n_etypes_in_filetype = filetype_size/etype_size;
n_filetypes = (int) (offset / n_etypes_in_filetype);
etype_in_filetype = (int) (offset % n_etypes_in_filetype);
size_in_filetype = etype_in_filetype * etype_size;
sum = 0;
for (i=0; i<flat_file->count; i++) {
sum += flat_file->blocklens[i];
if (sum > size_in_filetype) {
st_index = i;
frd_size = sum - size_in_filetype;
abs_off_in_filetype = flat_file->indices[i] +
size_in_filetype - (sum - flat_file->blocklens[i]);
break;
}
}
/* abs. offset in bytes in the file */
offset = disp + (ADIO_Offset) n_filetypes*filetype_extent +
abs_off_in_filetype;
}
start_off = offset;
/* Wei-keng Liao: read request is within a single flat_file contig
* block e.g. with subarray types that actually describe the whole
* array */
if (buftype_is_contig && bufsize <= frd_size) {
ADIO_ReadContig(fd, buf, bufsize, MPI_BYTE, ADIO_EXPLICIT_OFFSET,
offset, status, error_code);
if (file_ptr_type == ADIO_INDIVIDUAL) {
/* update MPI-IO file pointer to point to the first byte that
* can be accessed in the fileview. */
fd->fp_ind = offset + bufsize;
if (bufsize == frd_size) {
do {
st_index++;
if (st_index == flat_file->count) {
st_index = 0;
n_filetypes++;
}
} while (flat_file->blocklens[st_index] == 0);
fd->fp_ind = disp + flat_file->indices[st_index]
+ n_filetypes*filetype_extent;
}
}
fd->fp_sys_posn = -1; /* set it to null. */
#ifdef HAVE_STATUS_SET_BYTES
MPIR_Status_set_bytes(status, datatype, bufsize);
#endif
return;
}
/* Calculate end_offset, the last byte-offset that will be accessed.
e.g., if start_offset=0 and 100 bytes to be read, end_offset=99*/
st_frd_size = frd_size;
st_n_filetypes = n_filetypes;
i = 0;
j = st_index;
off = offset;
frd_size = ADIOI_MIN(st_frd_size, bufsize);
while (i < bufsize) {
i += frd_size;
end_offset = off + frd_size - 1;
j = (j+1) % flat_file->count;
n_filetypes += (j == 0) ? 1 : 0;
while (flat_file->blocklens[j]==0) {
j = (j+1) % flat_file->count;
n_filetypes += (j == 0) ? 1 : 0;
}
off = disp + flat_file->indices[j] + (ADIO_Offset) n_filetypes*filetype_extent;
frd_size = ADIOI_MIN(flat_file->blocklens[j], bufsize-i);
}
/* if atomicity is true, lock (exclusive) the region to be accessed */
if (fd->atomicity)
ADIOI_WRITE_LOCK(fd, start_off, SEEK_SET, end_offset-start_off+1);
/* initial read into readbuf */
readbuf_off = offset;
readbuf = (char *) ADIOI_Malloc(max_bufsize);
readbuf_len = (int) (ADIOI_MIN(max_bufsize, end_offset-readbuf_off+1));
#ifdef ADIOI_MPE_LOGGING
MPE_Log_event( ADIOI_MPE_lseek_a, 0, NULL );
#endif
lseek(fd->fd_sys, offset, SEEK_SET);
#ifdef ADIOI_MPE_LOGGING
MPE_Log_event( ADIOI_MPE_lseek_b, 0, NULL );
#endif
if (!(fd->atomicity)) ADIOI_READ_LOCK(fd, offset, SEEK_SET, readbuf_len);
#ifdef ADIOI_MPE_LOGGING
MPE_Log_event( ADIOI_MPE_read_a, 0, NULL );
#endif
err = read(fd->fd_sys, readbuf, readbuf_len);
#ifdef ADIOI_MPE_LOGGING
MPE_Log_event( ADIOI_MPE_read_b, 0, NULL );
#endif
if (!(fd->atomicity)) ADIOI_UNLOCK(fd, offset, SEEK_SET, readbuf_len);
if (err == -1) err_flag = 1;
if (buftype_is_contig && !filetype_is_contig) {
/* contiguous in memory, noncontiguous in file. should be the most
common case. */
i = 0;
j = st_index;
off = offset;
n_filetypes = st_n_filetypes;
frd_size = ADIOI_MIN(st_frd_size, bufsize);
while (i < bufsize) {
if (frd_size) {
/* TYPE_UB and TYPE_LB can result in
frd_size = 0. save system call in such cases */
/* lseek(fd->fd_sys, off, SEEK_SET);
err = read(fd->fd_sys, ((char *) buf) + i, frd_size);*/
req_off = off;
req_len = frd_size;
userbuf_off = i;
ADIOI_BUFFERED_READ
}
i += frd_size;
if (off + frd_size < disp + flat_file->indices[j] +
flat_file->blocklens[j] + (ADIO_Offset) n_filetypes*filetype_extent)
off += frd_size;
/* did not reach end of contiguous block in filetype.
no more I/O needed. off is incremented by frd_size. */
else {
j = (j+1) % flat_file->count;
n_filetypes += (j == 0) ? 1 : 0;
while (flat_file->blocklens[j]==0) {
j = (j+1) % flat_file->count;
n_filetypes += (j == 0) ? 1 : 0;
}
off = disp + flat_file->indices[j] +
(ADIO_Offset) n_filetypes*filetype_extent;
frd_size = ADIOI_MIN(flat_file->blocklens[j], bufsize-i);
}
}
}
else {
void ADIOI_NFS_ReadStrided(ADIO_File fd, void *buf, int count,
MPI_Datatype datatype, int file_ptr_type,
ADIO_Offset offset, ADIO_Status *status, int
*error_code)
{
/* offset is in units of etype relative to the filetype. */
ADIOI_Flatlist_node *flat_buf, *flat_file;
int i, j, k, err=-1, brd_size, frd_size=0, st_index=0;
int bufsize, num, size, sum, n_etypes_in_filetype, size_in_filetype;
int n_filetypes, etype_in_filetype;
ADIO_Offset abs_off_in_filetype=0;
int filetype_size, etype_size, buftype_size, req_len, partial_read;
MPI_Aint filetype_extent, buftype_extent;
int buf_count, buftype_is_contig, filetype_is_contig;
ADIO_Offset userbuf_off;
ADIO_Offset off, req_off, disp, end_offset, readbuf_off, start_off;
char *readbuf, *tmp_buf, *value;
int flag, st_frd_size, st_n_filetypes, readbuf_len;
int new_brd_size, new_frd_size, err_flag=0, info_flag, max_bufsize;
#ifndef PRINT_ERR_MSG
static char myname[] = "ADIOI_NFS_READSTRIDED";
#endif
ADIOI_Datatype_iscontig(datatype, &buftype_is_contig);
ADIOI_Datatype_iscontig(fd->filetype, &filetype_is_contig);
MPI_Type_size(fd->filetype, &filetype_size);
MPI_Type_extent(fd->filetype, &filetype_extent);
MPI_Type_size(datatype, &buftype_size);
MPI_Type_extent(datatype, &buftype_extent);
etype_size = fd->etype_size;
bufsize = buftype_size * count;
/* get max_bufsize from the info object. */
value = (char *) ADIOI_Malloc((MPI_MAX_INFO_VAL+1)*sizeof(char));
MPI_Info_get(fd->info, "ind_rd_buffer_size", MPI_MAX_INFO_VAL, value,
&info_flag);
max_bufsize = atoi(value);
ADIOI_Free(value);
if (!buftype_is_contig && filetype_is_contig) {
/* noncontiguous in memory, contiguous in file. */
ADIOI_Flatten_datatype(datatype);
flat_buf = ADIOI_Flatlist;
while (flat_buf->type != datatype) flat_buf = flat_buf->next;
off = (file_ptr_type == ADIO_INDIVIDUAL) ? fd->fp_ind :
fd->disp + etype_size * offset;
start_off = off;
end_offset = off + bufsize - 1;
readbuf_off = off;
readbuf = (char *) ADIOI_Malloc(max_bufsize);
readbuf_len = (int) (ADIOI_MIN(max_bufsize, end_offset-readbuf_off+1));
/* if atomicity is true, lock (exclusive) the region to be accessed */
if (fd->atomicity)
ADIOI_WRITE_LOCK(fd, start_off, SEEK_SET, end_offset-start_off+1);
lseek(fd->fd_sys, readbuf_off, SEEK_SET);
if (!(fd->atomicity)) ADIOI_READ_LOCK(fd, readbuf_off, SEEK_SET, readbuf_len);
err = read(fd->fd_sys, readbuf, readbuf_len);
if (!(fd->atomicity)) ADIOI_UNLOCK(fd, readbuf_off, SEEK_SET, readbuf_len);
if (err == -1) err_flag = 1;
for (j=0; j<count; j++)
for (i=0; i<flat_buf->count; i++) {
userbuf_off = j*buftype_extent + flat_buf->indices[i];
req_off = off;
req_len = flat_buf->blocklens[i];
ADIOI_BUFFERED_READ
off += flat_buf->blocklens[i];
}
if (fd->atomicity)
ADIOI_UNLOCK(fd, start_off, SEEK_SET, end_offset-start_off+1);
if (file_ptr_type == ADIO_INDIVIDUAL) fd->fp_ind = off;
ADIOI_Free(readbuf); /* malloced in the buffered_read macro */
#ifdef PRINT_ERR_MSG
*error_code = (err_flag) ? MPI_ERR_UNKNOWN : MPI_SUCCESS;
#else
if (err_flag) {
*error_code = MPIR_Err_setmsg(MPI_ERR_IO, MPIR_ADIO_ERROR,
myname, "I/O Error", "%s", strerror(errno));
ADIOI_Error(fd, *error_code, myname);
}
else *error_code = MPI_SUCCESS;
#endif
}
else { /* noncontiguous in file */
/* filetype already flattened in ADIO_Open */
flat_file = ADIOI_Flatlist;
while (flat_file->type != fd->filetype) flat_file = flat_file->next;
disp = fd->disp;
if (file_ptr_type == ADIO_INDIVIDUAL) {
offset = fd->fp_ind; /* in bytes */
n_filetypes = -1;
flag = 0;
while (!flag) {
n_filetypes++;
for (i=0; i<flat_file->count; i++) {
if (disp + flat_file->indices[i] +
(ADIO_Offset) n_filetypes*filetype_extent + flat_file->blocklens[i]
>= offset) {
st_index = i;
frd_size = (int) (disp + flat_file->indices[i] +
(ADIO_Offset) n_filetypes*filetype_extent
+ flat_file->blocklens[i] - offset);
flag = 1;
break;
}
}
}
}
else {
n_etypes_in_filetype = filetype_size/etype_size;
n_filetypes = (int) (offset / n_etypes_in_filetype);
etype_in_filetype = (int) (offset % n_etypes_in_filetype);
size_in_filetype = etype_in_filetype * etype_size;
sum = 0;
for (i=0; i<flat_file->count; i++) {
sum += flat_file->blocklens[i];
if (sum > size_in_filetype) {
st_index = i;
frd_size = sum - size_in_filetype;
abs_off_in_filetype = flat_file->indices[i] +
size_in_filetype - (sum - flat_file->blocklens[i]);
break;
}
}
/* abs. offset in bytes in the file */
offset = disp + (ADIO_Offset) n_filetypes*filetype_extent + abs_off_in_filetype;
}
start_off = offset;
/* Calculate end_offset, the last byte-offset that will be accessed.
e.g., if start_offset=0 and 100 bytes to be read, end_offset=99*/
st_frd_size = frd_size;
st_n_filetypes = n_filetypes;
i = 0;
j = st_index;
off = offset;
frd_size = ADIOI_MIN(st_frd_size, bufsize);
while (i < bufsize) {
i += frd_size;
end_offset = off + frd_size - 1;
if (j < (flat_file->count - 1)) j++;
else {
j = 0;
n_filetypes++;
}
off = disp + flat_file->indices[j] + (ADIO_Offset) n_filetypes*filetype_extent;
frd_size = ADIOI_MIN(flat_file->blocklens[j], bufsize-i);
}
/* if atomicity is true, lock (exclusive) the region to be accessed */
if (fd->atomicity)
ADIOI_WRITE_LOCK(fd, start_off, SEEK_SET, end_offset-start_off+1);
/* initial read into readbuf */
readbuf_off = offset;
readbuf = (char *) ADIOI_Malloc(max_bufsize);
readbuf_len = (int) (ADIOI_MIN(max_bufsize, end_offset-readbuf_off+1));
lseek(fd->fd_sys, offset, SEEK_SET);
if (!(fd->atomicity)) ADIOI_READ_LOCK(fd, offset, SEEK_SET, readbuf_len);
err = read(fd->fd_sys, readbuf, readbuf_len);
if (!(fd->atomicity)) ADIOI_UNLOCK(fd, offset, SEEK_SET, readbuf_len);
if (err == -1) err_flag = 1;
if (buftype_is_contig && !filetype_is_contig) {
/* contiguous in memory, noncontiguous in file. should be the most
common case. */
i = 0;
j = st_index;
off = offset;
n_filetypes = st_n_filetypes;
frd_size = ADIOI_MIN(st_frd_size, bufsize);
while (i < bufsize) {
if (frd_size) {
/* TYPE_UB and TYPE_LB can result in
frd_size = 0. save system call in such cases */
/* lseek(fd->fd_sys, off, SEEK_SET);
err = read(fd->fd_sys, ((char *) buf) + i, frd_size);*/
req_off = off;
req_len = frd_size;
userbuf_off = i;
ADIOI_BUFFERED_READ
}
i += frd_size;
if (off + frd_size < disp + flat_file->indices[j] +
flat_file->blocklens[j] + (ADIO_Offset) n_filetypes*filetype_extent)
off += frd_size;
/* did not reach end of contiguous block in filetype.
no more I/O needed. off is incremented by frd_size. */
else {
if (j < (flat_file->count - 1)) j++;
else {
j = 0;
n_filetypes++;
}
off = disp + flat_file->indices[j] +
(ADIO_Offset) n_filetypes*filetype_extent;
frd_size = ADIOI_MIN(flat_file->blocklens[j], bufsize-i);
}
}
}
else {
int MPIOI_File_read(MPI_File fh,
MPI_Offset offset,
int file_ptr_type,
void *buf,
int count,
MPI_Datatype datatype,
char *myname,
MPI_Status *status)
{
int error_code, buftype_is_contig, filetype_is_contig;
MPI_Count datatype_size;
ADIO_File adio_fh;
ADIO_Offset off, bufsize;
void *xbuf=NULL, *e32_buf=NULL;
ROMIO_THREAD_CS_ENTER();
adio_fh = MPIO_File_resolve(fh);
/* --BEGIN ERROR HANDLING-- */
MPIO_CHECK_FILE_HANDLE(adio_fh, myname, error_code);
MPIO_CHECK_COUNT(adio_fh, count, myname, error_code);
MPIO_CHECK_DATATYPE(adio_fh, datatype, myname, error_code);
if (file_ptr_type == ADIO_EXPLICIT_OFFSET && offset < 0)
{
error_code = MPIO_Err_create_code(MPI_SUCCESS, MPIR_ERR_RECOVERABLE,
myname, __LINE__, MPI_ERR_ARG,
"**iobadoffset", 0);
error_code = MPIO_Err_return_file(adio_fh, error_code);
goto fn_exit;
}
/* --END ERROR HANDLING-- */
MPI_Type_size_x(datatype, &datatype_size);
/* --BEGIN ERROR HANDLING-- */
MPIO_CHECK_COUNT_SIZE(adio_fh, count, datatype_size, myname, error_code);
/* --END ERROR HANDLING-- */
if (count*datatype_size == 0)
{
#ifdef HAVE_STATUS_SET_BYTES
MPIR_Status_set_bytes(status, datatype, 0);
#endif
error_code = MPI_SUCCESS;
goto fn_exit;
}
/* --BEGIN ERROR HANDLING-- */
MPIO_CHECK_INTEGRAL_ETYPE(adio_fh, count, datatype_size, myname, error_code);
MPIO_CHECK_READABLE(adio_fh, myname, error_code);
MPIO_CHECK_NOT_SEQUENTIAL_MODE(adio_fh, myname, error_code);
/* --END ERROR HANDLING-- */
ADIOI_Datatype_iscontig(datatype, &buftype_is_contig);
ADIOI_Datatype_iscontig(adio_fh->filetype, &filetype_is_contig);
ADIOI_TEST_DEFERRED(adio_fh, myname, &error_code);
xbuf = buf;
if (adio_fh->is_external32)
{
MPI_Aint e32_size = 0;
error_code = MPIU_datatype_full_size(datatype, &e32_size);
if (error_code != MPI_SUCCESS)
goto fn_exit;
e32_buf = ADIOI_Malloc(e32_size*count);
xbuf = e32_buf;
}
if (buftype_is_contig && filetype_is_contig)
{
/* convert count and offset to bytes */
bufsize = datatype_size * count;
if (file_ptr_type == ADIO_EXPLICIT_OFFSET) {
off = adio_fh->disp + adio_fh->etype_size * offset;
}
else /* ADIO_INDIVIDUAL */ {
off = adio_fh->fp_ind;
}
/* if atomic mode requested, lock (exclusive) the region, because
there could be a concurrent noncontiguous request.
*/
if ((adio_fh->atomicity) && ADIO_Feature(adio_fh, ADIO_LOCKS)) {
ADIOI_WRITE_LOCK(adio_fh, off, SEEK_SET, bufsize);
}
ADIO_ReadContig(adio_fh, xbuf, count, datatype, file_ptr_type,
off, status, &error_code);
if ((adio_fh->atomicity) && ADIO_Feature(adio_fh, ADIO_LOCKS)) {
ADIOI_UNLOCK(adio_fh, off, SEEK_SET, bufsize);
}
}
else
{
ADIO_ReadStrided(adio_fh, xbuf, count, datatype, file_ptr_type,
offset, status, &error_code);
/* For strided and atomic mode, locking is done in ADIO_ReadStrided */
}
/* --BEGIN ERROR HANDLING-- */
if (error_code != MPI_SUCCESS)
error_code = MPIO_Err_return_file(adio_fh, error_code);
/* --END ERROR HANDLING-- */
if (e32_buf != NULL) {
error_code = MPIU_read_external32_conversion_fn(buf, datatype,
count, e32_buf);
ADIOI_Free(e32_buf);
}
fn_exit:
ROMIO_THREAD_CS_EXIT();
return error_code;
}
void ADIOI_BGL_WriteContig(ADIO_File fd, void *buf, int count,
MPI_Datatype datatype, int file_ptr_type,
ADIO_Offset offset, ADIO_Status *status, int *error_code)
{
int err=-1, datatype_size;
ADIO_Offset len;
static char myname[] = "ADIOI_BGL_WRITECONTIG";
#ifdef AGGREGATION_PROFILE
MPE_Log_event (5036, 0, NULL);
#endif
#if BGL_PROFILE
/* timing */
double io_time, io_time2;
if (bglmpio_timing) {
io_time = MPI_Wtime();
bglmpio_prof_cw[ BGLMPIO_CIO_DATA_SIZE ] += len;
}
#endif
MPI_Type_size(datatype, &datatype_size);
len = (ADIO_Offset)datatype_size * (ADIO_Offset)count;
ADIOI_Assert(len == (unsigned int) len); /* write takes an unsigned int parm */
#if BGL_PROFILE
if (file_ptr_type == ADIO_EXPLICIT_OFFSET) {
if (bglmpio_timing2) io_time2 = MPI_Wtime();
if (fd->fp_sys_posn != offset)
lseek(fd->fd_sys, offset, SEEK_SET);
if (bglmpio_timing2) bglmpio_prof_cw[ BGLMPIO_CIO_T_SEEK ] += (MPI_Wtime() - io_time2);
ADIOI_WRITE_LOCK(fd, offset, SEEK_SET, len);
if (bglmpio_timing2) io_time2 = MPI_Wtime();
err = write(fd->fd_sys, buf, (unsigned int)len);
if (bglmpio_timing2) bglmpio_prof_cw[ BGLMPIO_CIO_T_POSI_RW ] += (MPI_Wtime() - io_time2);
ADIOI_UNLOCK(fd, offset, SEEK_SET, len);
fd->fp_sys_posn = offset + err;
/* individual file pointer not updated */
}
else { /* write from curr. location of ind. file pointer */
offset = fd->fp_ind;
if (bglmpio_timing2) io_time2 = MPI_Wtime();
if (fd->fp_sys_posn != fd->fp_ind)
lseek(fd->fd_sys, fd->fp_ind, SEEK_SET);
if (bglmpio_timing2) bglmpio_prof_cw[ BGLMPIO_CIO_T_SEEK ] += (MPI_Wtime() - io_time2);
ADIOI_WRITE_LOCK(fd, offset, SEEK_SET, len);
if (bglmpio_timing2) io_time2 = MPI_Wtime();
err = write(fd->fd_sys, buf, (unsigned int)len);
if (bglmpio_timing2) bglmpio_prof_cw[ BGLMPIO_CIO_T_POSI_RW ] += (MPI_Wtime() - io_time2);
ADIOI_UNLOCK(fd, offset, SEEK_SET, len);
fd->fp_ind += err;
fd->fp_sys_posn = fd->fp_ind;
}
#else /* BGL_PROFILE */
if (file_ptr_type == ADIO_EXPLICIT_OFFSET) {
if (fd->fp_sys_posn != offset)
lseek(fd->fd_sys, offset, SEEK_SET);
ADIOI_WRITE_LOCK(fd, offset, SEEK_SET, len);
err = write(fd->fd_sys, buf, (unsigned int)len);
ADIOI_UNLOCK(fd, offset, SEEK_SET, len);
fd->fp_sys_posn = offset + err;
/* individual file pointer not updated */
}
else { /* write from curr. location of ind. file pointer */
offset = fd->fp_ind;
if (fd->fp_sys_posn != fd->fp_ind)
lseek(fd->fd_sys, fd->fp_ind, SEEK_SET);
ADIOI_WRITE_LOCK(fd, offset, SEEK_SET, len);
err = write(fd->fd_sys, buf, (unsigned int)len);
ADIOI_UNLOCK(fd, offset, SEEK_SET, len);
fd->fp_ind += err;
fd->fp_sys_posn = fd->fp_ind;
}
#endif /* BGL_PROFILE */
#if BGL_PROFILE
if (bglmpio_timing) bglmpio_prof_cw[ BGLMPIO_CIO_T_MPIO_RW ] += (MPI_Wtime() - io_time);
#endif
/* --BEGIN ERROR HANDLING-- */
if (err == -1) {
*error_code = MPIO_Err_create_code(MPI_SUCCESS, MPIR_ERR_RECOVERABLE,
myname, __LINE__, MPI_ERR_IO,
"**io",
"**io %s", strerror(errno));
return;
}
/* --END ERROR HANDLING-- */
#ifdef HAVE_STATUS_SET_BYTES
MPIR_Status_set_bytes(status, datatype, err);
#endif
*error_code = MPI_SUCCESS;
#ifdef AGGREGATION_PROFILE
MPE_Log_event (5037, 0, NULL);
#endif
}
int MPIOI_File_read(MPI_File mpi_fh,
MPI_Offset offset,
int file_ptr_type,
void *buf,
int count,
MPI_Datatype datatype,
char *myname,
MPI_Status *status)
{
int error_code, bufsize, buftype_is_contig, filetype_is_contig;
int datatype_size;
ADIO_File fh;
ADIO_Offset off;
MPID_CS_ENTER();
MPIR_Nest_incr();
fh = MPIO_File_resolve(mpi_fh);
/* --BEGIN ERROR HANDLING-- */
MPIO_CHECK_FILE_HANDLE(fh, myname, error_code);
MPIO_CHECK_COUNT(fh, count, myname, error_code);
MPIO_CHECK_DATATYPE(fh, datatype, myname, error_code);
if (file_ptr_type == ADIO_EXPLICIT_OFFSET && offset < 0)
{
error_code = MPIO_Err_create_code(MPI_SUCCESS, MPIR_ERR_RECOVERABLE,
myname, __LINE__, MPI_ERR_ARG,
"**iobadoffset", 0);
error_code = MPIO_Err_return_file(fh, error_code);
goto fn_exit;
}
/* --END ERROR HANDLING-- */
MPI_Type_size(datatype, &datatype_size);
if (count*datatype_size == 0)
{
#ifdef HAVE_STATUS_SET_BYTES
MPIR_Status_set_bytes(status, datatype, 0);
#endif
error_code = MPI_SUCCESS;
goto fn_exit;
}
/* --BEGIN ERROR HANDLING-- */
MPIO_CHECK_INTEGRAL_ETYPE(fh, count, datatype_size, myname, error_code);
MPIO_CHECK_READABLE(fh, myname, error_code);
MPIO_CHECK_NOT_SEQUENTIAL_MODE(fh, myname, error_code);
/* --END ERROR HANDLING-- */
ADIOI_Datatype_iscontig(datatype, &buftype_is_contig);
ADIOI_Datatype_iscontig(fh->filetype, &filetype_is_contig);
ADIOI_TEST_DEFERRED(fh, myname, &error_code);
if (buftype_is_contig && filetype_is_contig)
{
/* convert count and offset to bytes */
bufsize = datatype_size * count;
if (file_ptr_type == ADIO_EXPLICIT_OFFSET) {
off = fh->disp + fh->etype_size * offset;
}
else /* ADIO_INDIVIDUAL */ {
off = fh->fp_ind;
}
/* if atomic mode requested, lock (exclusive) the region, because
there could be a concurrent noncontiguous request. Locking doesn't
work on PIOFS and PVFS, and on NFS it is done in the
ADIO_ReadContig.
*/
if ((fh->atomicity) && (fh->file_system != ADIO_PIOFS) &&
(fh->file_system != ADIO_NFS) && (fh->file_system != ADIO_PVFS) &&
(fh->file_system != ADIO_PVFS2))
ADIOI_WRITE_LOCK(fh, off, SEEK_SET, bufsize);
ADIO_ReadContig(fh, buf, count, datatype, file_ptr_type,
off, status, &error_code);
if ((fh->atomicity) && (fh->file_system != ADIO_PIOFS) &&
(fh->file_system != ADIO_NFS) && (fh->file_system != ADIO_PVFS) &&
(fh->file_system != ADIO_PVFS2))
ADIOI_UNLOCK(fh, off, SEEK_SET, bufsize);
}
else
{
ADIO_ReadStrided(fh, buf, count, datatype, file_ptr_type,
offset, status, &error_code);
/* For strided and atomic mode, locking is done in ADIO_ReadStrided */
}
fn_exit:
MPIR_Nest_decr();
MPID_CS_EXIT();
return error_code;
}
void ADIOI_NFS_WriteStrided(ADIO_File fd, const void *buf, int count,
MPI_Datatype datatype, int file_ptr_type,
ADIO_Offset offset, ADIO_Status * status, int
*error_code)
{
/* offset is in units of etype relative to the filetype. */
ADIOI_Flatlist_node *flat_buf, *flat_file;
int i, j, k, err = -1, bwr_size, st_index = 0;
ADIO_Offset i_offset, sum, size_in_filetype;
ADIO_Offset num, size, n_etypes_in_filetype;
MPI_Count bufsize;
ADIO_Offset n_filetypes, etype_in_filetype;
ADIO_Offset abs_off_in_filetype = 0;
int req_len;
MPI_Count filetype_size, etype_size, buftype_size;
MPI_Aint filetype_extent, buftype_extent;
int buf_count, buftype_is_contig, filetype_is_contig;
ADIO_Offset userbuf_off;
ADIO_Offset off, req_off, disp, end_offset = 0, writebuf_off, start_off;
char *writebuf = NULL, *value;
int st_n_filetypes, writebuf_len, write_sz;
ADIO_Offset fwr_size = 0, new_fwr_size, st_fwr_size;
int new_bwr_size, err_flag = 0, info_flag, max_bufsize;
static char myname[] = "ADIOI_NFS_WRITESTRIDED";
ADIOI_Datatype_iscontig(datatype, &buftype_is_contig);
ADIOI_Datatype_iscontig(fd->filetype, &filetype_is_contig);
MPI_Type_size_x(fd->filetype, &filetype_size);
if (!filetype_size) {
#ifdef HAVE_STATUS_SET_BYTES
MPIR_Status_set_bytes(status, datatype, 0);
#endif
*error_code = MPI_SUCCESS;
return;
}
MPI_Type_extent(fd->filetype, &filetype_extent);
MPI_Type_size_x(datatype, &buftype_size);
MPI_Type_extent(datatype, &buftype_extent);
etype_size = fd->etype_size;
bufsize = buftype_size * count;
/* get max_bufsize from the info object. */
value = (char *) ADIOI_Malloc((MPI_MAX_INFO_VAL + 1) * sizeof(char));
ADIOI_Info_get(fd->info, "ind_wr_buffer_size", MPI_MAX_INFO_VAL, value, &info_flag);
max_bufsize = atoi(value);
ADIOI_Free(value);
if (!buftype_is_contig && filetype_is_contig) {
/* noncontiguous in memory, contiguous in file. */
flat_buf = ADIOI_Flatten_and_find(datatype);
off = (file_ptr_type == ADIO_INDIVIDUAL) ? fd->fp_ind : fd->disp + etype_size * offset;
start_off = off;
end_offset = off + bufsize - 1;
writebuf_off = off;
writebuf = (char *) ADIOI_Malloc(max_bufsize);
writebuf_len = (int) (MPL_MIN(max_bufsize, end_offset - writebuf_off + 1));
/* if atomicity is true, lock the region to be accessed */
if (fd->atomicity)
ADIOI_WRITE_LOCK(fd, start_off, SEEK_SET, end_offset - start_off + 1);
for (j = 0; j < count; j++)
for (i = 0; i < flat_buf->count; i++) {
userbuf_off = j * buftype_extent + flat_buf->indices[i];
req_off = off;
req_len = flat_buf->blocklens[i];
ADIOI_BUFFERED_WRITE_WITHOUT_READ off += flat_buf->blocklens[i];
}
/* write the buffer out finally */
#ifdef ADIOI_MPE_LOGGING
MPE_Log_event(ADIOI_MPE_lseek_a, 0, NULL);
#endif
lseek(fd->fd_sys, writebuf_off, SEEK_SET);
#ifdef ADIOI_MPE_LOGGING
MPE_Log_event(ADIOI_MPE_lseek_b, 0, NULL);
#endif
if (!(fd->atomicity))
ADIOI_WRITE_LOCK(fd, writebuf_off, SEEK_SET, writebuf_len);
#ifdef ADIOI_MPE_LOGGING
MPE_Log_event(ADIOI_MPE_write_a, 0, NULL);
#endif
err = write(fd->fd_sys, writebuf, writebuf_len);
#ifdef ADIOI_MPE_LOGGING
MPE_Log_event(ADIOI_MPE_write_b, 0, NULL);
#endif
if (!(fd->atomicity))
ADIOI_UNLOCK(fd, writebuf_off, SEEK_SET, writebuf_len);
if (err == -1)
err_flag = 1;
if (fd->atomicity)
ADIOI_UNLOCK(fd, start_off, SEEK_SET, end_offset - start_off + 1);
if (file_ptr_type == ADIO_INDIVIDUAL)
fd->fp_ind = off;
if (err_flag) {
*error_code = MPIO_Err_create_code(MPI_SUCCESS,
MPIR_ERR_RECOVERABLE, myname,
__LINE__, MPI_ERR_IO, "**io",
"**io %s", strerror(errno));
} else
*error_code = MPI_SUCCESS;
}
else { /* noncontiguous in file */
flat_file = ADIOI_Flatten_and_find(fd->filetype);
disp = fd->disp;
if (file_ptr_type == ADIO_INDIVIDUAL) {
/* Wei-keng reworked type processing to be a bit more efficient */
offset = fd->fp_ind - disp;
n_filetypes = (offset - flat_file->indices[0]) / filetype_extent;
offset -= (ADIO_Offset) n_filetypes *filetype_extent;
/* now offset is local to this extent */
/* find the block where offset is located, skip blocklens[i]==0 */
for (i = 0; i < flat_file->count; i++) {
ADIO_Offset dist;
if (flat_file->blocklens[i] == 0)
continue;
dist = flat_file->indices[i] + flat_file->blocklens[i] - offset;
/* fwr_size is from offset to the end of block i */
if (dist == 0) {
i++;
offset = flat_file->indices[i];
fwr_size = flat_file->blocklens[i];
break;
}
if (dist > 0) {
fwr_size = dist;
break;
}
}
st_index = i; /* starting index in flat_file->indices[] */
offset += disp + (ADIO_Offset) n_filetypes *filetype_extent;
} else {
n_etypes_in_filetype = filetype_size / etype_size;
n_filetypes = offset / n_etypes_in_filetype;
etype_in_filetype = offset % n_etypes_in_filetype;
size_in_filetype = etype_in_filetype * etype_size;
sum = 0;
for (i = 0; i < flat_file->count; i++) {
sum += flat_file->blocklens[i];
if (sum > size_in_filetype) {
st_index = i;
fwr_size = sum - size_in_filetype;
abs_off_in_filetype = flat_file->indices[i] +
size_in_filetype - (sum - flat_file->blocklens[i]);
break;
}
}
/* abs. offset in bytes in the file */
offset = disp + (ADIO_Offset) n_filetypes *filetype_extent + abs_off_in_filetype;
}
start_off = offset;
/* Wei-keng Liao:write request is within single flat_file contig block */
/* this could happen, for example, with subarray types that are
* actually fairly contiguous */
if (buftype_is_contig && bufsize <= fwr_size) {
/* though MPI api has an integer 'count' parameter, derived
* datatypes might describe more bytes than can fit into an integer.
* if we've made it this far, we can pass a count of original
* datatypes, instead of a count of bytes (which might overflow)
* Other WriteContig calls in this path are operating on data
* sieving buffer */
ADIO_WriteContig(fd, buf, count, datatype, ADIO_EXPLICIT_OFFSET,
offset, status, error_code);
if (file_ptr_type == ADIO_INDIVIDUAL) {
/* update MPI-IO file pointer to point to the first byte
* that can be accessed in the fileview. */
fd->fp_ind = offset + bufsize;
if (bufsize == fwr_size) {
do {
st_index++;
if (st_index == flat_file->count) {
st_index = 0;
n_filetypes++;
}
} while (flat_file->blocklens[st_index] == 0);
fd->fp_ind = disp + flat_file->indices[st_index]
+ (ADIO_Offset) n_filetypes *filetype_extent;
}
}
fd->fp_sys_posn = -1; /* set it to null. */
#ifdef HAVE_STATUS_SET_BYTES
MPIR_Status_set_bytes(status, datatype, bufsize);
#endif
goto fn_exit;
}
/* Calculate end_offset, the last byte-offset that will be accessed.
* e.g., if start_offset=0 and 100 bytes to be write, end_offset=99 */
st_fwr_size = fwr_size;
st_n_filetypes = n_filetypes;
i_offset = 0;
j = st_index;
off = offset;
fwr_size = MPL_MIN(st_fwr_size, bufsize);
while (i_offset < bufsize) {
i_offset += fwr_size;
end_offset = off + fwr_size - 1;
j = (j + 1) % flat_file->count;
n_filetypes += (j == 0) ? 1 : 0;
while (flat_file->blocklens[j] == 0) {
j = (j + 1) % flat_file->count;
n_filetypes += (j == 0) ? 1 : 0;
}
off = disp + flat_file->indices[j] + n_filetypes * (ADIO_Offset) filetype_extent;
fwr_size = MPL_MIN(flat_file->blocklens[j], bufsize - i_offset);
}
/* if atomicity is true, lock the region to be accessed */
if (fd->atomicity)
ADIOI_WRITE_LOCK(fd, start_off, SEEK_SET, end_offset - start_off + 1);
/* initial read for the read-modify-write */
writebuf_off = offset;
writebuf = (char *) ADIOI_Malloc(max_bufsize);
memset(writebuf, -1, max_bufsize);
writebuf_len = (int) (MPL_MIN(max_bufsize, end_offset - writebuf_off + 1));
if (!(fd->atomicity))
ADIOI_WRITE_LOCK(fd, writebuf_off, SEEK_SET, writebuf_len);
#ifdef ADIOI_MPE_LOGGING
MPE_Log_event(ADIOI_MPE_lseek_a, 0, NULL);
#endif
lseek(fd->fd_sys, writebuf_off, SEEK_SET);
#ifdef ADIOI_MPE_LOGGING
MPE_Log_event(ADIOI_MPE_lseek_b, 0, NULL);
#endif
#ifdef ADIOI_MPE_LOGGING
MPE_Log_event(ADIOI_MPE_read_a, 0, NULL);
#endif
err = read(fd->fd_sys, writebuf, writebuf_len);
#ifdef ADIOI_MPE_LOGGING
MPE_Log_event(ADIOI_MPE_read_b, 0, NULL);
#endif
if (err == -1) {
*error_code = MPIO_Err_create_code(MPI_SUCCESS,
MPIR_ERR_RECOVERABLE,
myname, __LINE__,
MPI_ERR_IO,
"ADIOI_NFS_WriteStrided: ROMIO tries to optimize this access by doing a read-modify-write, but is unable to read the file. Please give the file read permission and open it with MPI_MODE_RDWR.",
0);
goto fn_exit;
}
if (buftype_is_contig && !filetype_is_contig) {
/* contiguous in memory, noncontiguous in file. should be the most
common case. */
i_offset = 0;
j = st_index;
off = offset;
n_filetypes = st_n_filetypes;
fwr_size = MPL_MIN(st_fwr_size, bufsize);
while (i_offset < bufsize) {
if (fwr_size) {
/* TYPE_UB and TYPE_LB can result in
* fwr_size = 0. save system call in such cases */
/* lseek(fd->fd_sys, off, SEEK_SET);
* err = write(fd->fd_sys, ((char *) buf) + i, fwr_size); */
req_off = off;
req_len = fwr_size;
userbuf_off = i_offset;
ADIOI_BUFFERED_WRITE}
i_offset += fwr_size;
if (off + fwr_size < disp + flat_file->indices[j] +
flat_file->blocklens[j] + n_filetypes * (ADIO_Offset) filetype_extent)
off += fwr_size;
/* did not reach end of contiguous block in filetype.
* no more I/O needed. off is incremented by fwr_size. */
else {
j = (j + 1) % flat_file->count;
n_filetypes += (j == 0) ? 1 : 0;
while (flat_file->blocklens[j] == 0) {
j = (j + 1) % flat_file->count;
n_filetypes += (j == 0) ? 1 : 0;
}
off = disp + flat_file->indices[j] +
n_filetypes * (ADIO_Offset) filetype_extent;
fwr_size = MPL_MIN(flat_file->blocklens[j], bufsize - i_offset);
}
}
} else {
/*@
MPI_File_iread_at - Nonblocking read using explict offset
Input Parameters:
. fh - file handle (handle)
. offset - file offset (nonnegative integer)
. count - number of elements in buffer (nonnegative integer)
. datatype - datatype of each buffer element (handle)
Output Parameters:
. buf - initial address of buffer (choice)
. request - request object (handle)
.N fortran
@*/
int MPI_File_iread_at(MPI_File fh, MPI_Offset offset, void *buf,
int count, MPI_Datatype datatype,
MPIO_Request *request)
{
int error_code, bufsize, buftype_is_contig, filetype_is_contig;
#ifndef PRINT_ERR_MSG
static char myname[] = "MPI_FILE_IREAD_AT";
#endif
int datatype_size;
ADIO_Status status;
ADIO_Offset off;
#ifdef MPI_hpux
int fl_xmpi;
HPMP_IO_START(fl_xmpi, BLKMPIFILEIREADAT, TRDTSYSTEM, fh, datatype, count);
#endif /* MPI_hpux */
#ifdef PRINT_ERR_MSG
if ((fh <= (MPI_File) 0) || (fh->cookie != ADIOI_FILE_COOKIE)) {
FPRINTF(stderr, "MPI_File_iread_at: Invalid file handle\n");
MPI_Abort(MPI_COMM_WORLD, 1);
}
#else
ADIOI_TEST_FILE_HANDLE(fh, myname);
#endif
if (offset < 0) {
#ifdef PRINT_ERR_MSG
FPRINTF(stderr, "MPI_File_iread_at: Invalid offset argument\n");
MPI_Abort(MPI_COMM_WORLD, 1);
#else
error_code = MPIR_Err_setmsg(MPI_ERR_ARG, MPIR_ERR_OFFSET_ARG,
myname, (char *) 0, (char *) 0);
return ADIOI_Error(fh, error_code, myname);
#endif
}
if (count < 0) {
#ifdef PRINT_ERR_MSG
FPRINTF(stderr, "MPI_File_iread_at: Invalid count argument\n");
MPI_Abort(MPI_COMM_WORLD, 1);
#else
error_code = MPIR_Err_setmsg(MPI_ERR_ARG, MPIR_ERR_COUNT_ARG,
myname, (char *) 0, (char *) 0);
return ADIOI_Error(fh, error_code, myname);
#endif
}
if (datatype == MPI_DATATYPE_NULL) {
#ifdef PRINT_ERR_MSG
FPRINTF(stderr, "MPI_File_iread_at: Invalid datatype\n");
MPI_Abort(MPI_COMM_WORLD, 1);
#else
error_code = MPIR_Err_setmsg(MPI_ERR_TYPE, MPIR_ERR_TYPE_NULL,
myname, (char *) 0, (char *) 0);
return ADIOI_Error(fh, error_code, myname);
#endif
}
MPI_Type_size(datatype, &datatype_size);
if ((count*datatype_size) % fh->etype_size != 0) {
#ifdef PRINT_ERR_MSG
FPRINTF(stderr, "MPI_File_iread_at: Only an integral number of etypes can be accessed\n");
MPI_Abort(MPI_COMM_WORLD, 1);
#else
error_code = MPIR_Err_setmsg(MPI_ERR_IO, MPIR_ERR_ETYPE_FRACTIONAL,
myname, (char *) 0, (char *) 0);
return ADIOI_Error(fh, error_code, myname);
#endif
}
if (fh->access_mode & MPI_MODE_WRONLY) {
#ifdef PRINT_ERR_MSG
FPRINTF(stderr, "MPI_File_iread_at: Can't read from a file opened with MPI_MODE_WRONLY\n");
MPI_Abort(MPI_COMM_WORLD, 1);
#else
error_code = MPIR_Err_setmsg(MPI_ERR_UNSUPPORTED_OPERATION,
MPIR_ERR_MODE_WRONLY, myname, (char *) 0, (char *) 0);
return ADIOI_Error(fh, error_code, myname);
#endif
}
if (fh->access_mode & MPI_MODE_SEQUENTIAL) {
#ifdef PRINT_ERR_MSG
FPRINTF(stderr, "MPI_File_iread_at: Can't use this function because file was opened with MPI_MODE_SEQUENTIAL\n");
MPI_Abort(MPI_COMM_WORLD, 1);
#else
error_code = MPIR_Err_setmsg(MPI_ERR_UNSUPPORTED_OPERATION,
MPIR_ERR_AMODE_SEQ, myname, (char *) 0, (char *) 0);
return ADIOI_Error(fh, error_code, myname);
#endif
}
ADIOI_Datatype_iscontig(datatype, &buftype_is_contig);
ADIOI_Datatype_iscontig(fh->filetype, &filetype_is_contig);
/* contiguous or strided? */
if (buftype_is_contig && filetype_is_contig) {
/* convert count and offset to bytes */
bufsize = datatype_size * count;
off = fh->disp + fh->etype_size * offset;
if (!(fh->atomicity))
ADIO_IreadContig(fh, buf, count, datatype, ADIO_EXPLICIT_OFFSET,
off, request, &error_code);
else {
/* to maintain strict atomicity semantics with other concurrent
operations, lock (exclusive) and call blocking routine */
*request = ADIOI_Malloc_request();
(*request)->optype = ADIOI_READ;
(*request)->fd = fh;
(*request)->datatype = datatype;
(*request)->queued = 0;
(*request)->handle = 0;
if ((fh->file_system != ADIO_PIOFS) &&
(fh->file_system != ADIO_NFS) && (fh->file_system != ADIO_PVFS))
ADIOI_WRITE_LOCK(fh, off, SEEK_SET, bufsize);
ADIO_ReadContig(fh, buf, count, datatype, ADIO_EXPLICIT_OFFSET,
off, &status, &error_code);
if ((fh->file_system != ADIO_PIOFS) &&
(fh->file_system != ADIO_NFS) && (fh->file_system != ADIO_PVFS))
ADIOI_UNLOCK(fh, off, SEEK_SET, bufsize);
fh->async_count++;
/* status info. must be linked to the request structure, so that it
can be accessed later from a wait */
}
}
else ADIO_IreadStrided(fh, buf, count, datatype, ADIO_EXPLICIT_OFFSET,
offset, request, &error_code);
#ifdef MPI_hpux
HPMP_IO_END(fl_xmpi, fh, datatype, count);
#endif /* MPI_hpux */
return error_code;
}
/*@
MPI_File_read_shared - Read using shared file pointer
Input Parameters:
. fh - file handle (handle)
. count - number of elements in buffer (nonnegative integer)
. datatype - datatype of each buffer element (handle)
Output Parameters:
. buf - initial address of buffer (choice)
. status - status object (Status)
.N fortran
@*/
int MPI_File_read_shared(MPI_File fh, void *buf, int count,
MPI_Datatype datatype, MPI_Status *status)
{
int error_code, bufsize, buftype_is_contig, filetype_is_contig;
#ifndef PRINT_ERR_MSG
static char myname[] = "MPI_FILE_READ_SHARED";
#endif
int datatype_size, incr;
ADIO_Offset off, shared_fp;
#ifdef PRINT_ERR_MSG
if ((fh <= (MPI_File) 0) || (fh->cookie != ADIOI_FILE_COOKIE)) {
FPRINTF(stderr, "MPI_File_read_shared: Invalid file handle\n");
MPI_Abort(MPI_COMM_WORLD, 1);
}
#else
ADIOI_TEST_FILE_HANDLE(fh, myname);
#endif
if (count < 0) {
#ifdef PRINT_ERR_MSG
FPRINTF(stderr, "MPI_File_read_shared: Invalid count argument\n");
MPI_Abort(MPI_COMM_WORLD, 1);
#else
error_code = MPIR_Err_setmsg(MPI_ERR_ARG, MPIR_ERR_COUNT_ARG,
myname, (char *) 0, (char *) 0);
return ADIOI_Error(fh, error_code, myname);
#endif
}
if (datatype == MPI_DATATYPE_NULL) {
#ifdef PRINT_ERR_MSG
FPRINTF(stderr, "MPI_File_read_shared: Invalid datatype\n");
MPI_Abort(MPI_COMM_WORLD, 1);
#else
error_code = MPIR_Err_setmsg(MPI_ERR_TYPE, MPIR_ERR_TYPE_NULL,
myname, (char *) 0, (char *) 0);
return ADIOI_Error(fh, error_code, myname);
#endif
}
MPI_Type_size(datatype, &datatype_size);
if (count*datatype_size == 0) return MPI_SUCCESS;
if ((count*datatype_size) % fh->etype_size != 0) {
#ifdef PRINT_ERR_MSG
FPRINTF(stderr, "MPI_File_read_shared: Only an integral number of etypes can be accessed\n");
MPI_Abort(MPI_COMM_WORLD, 1);
#else
error_code = MPIR_Err_setmsg(MPI_ERR_IO, MPIR_ERR_ETYPE_FRACTIONAL,
myname, (char *) 0, (char *) 0);
return ADIOI_Error(fh, error_code, myname);
#endif
}
if ((fh->file_system == ADIO_PIOFS) || (fh->file_system == ADIO_PVFS)) {
#ifdef PRINT_ERR_MSG
FPRINTF(stderr, "MPI_File_read_shared: Shared file pointer not supported on PIOFS and PVFS\n");
MPI_Abort(MPI_COMM_WORLD, 1);
#else
error_code = MPIR_Err_setmsg(MPI_ERR_UNSUPPORTED_OPERATION,
MPIR_ERR_NO_SHARED_FP, myname, (char *) 0, (char *) 0);
return ADIOI_Error(fh, error_code, myname);
#endif
}
ADIOI_Datatype_iscontig(datatype, &buftype_is_contig);
ADIOI_Datatype_iscontig(fh->filetype, &filetype_is_contig);
incr = (count*datatype_size)/fh->etype_size;
ADIO_Get_shared_fp(fh, incr, &shared_fp, &error_code);
if (error_code != MPI_SUCCESS) {
FPRINTF(stderr, "MPI_File_read_shared: Error! Could not access shared file pointer.\n");
MPI_Abort(MPI_COMM_WORLD, 1);
}
/* contiguous or strided? */
if (buftype_is_contig && filetype_is_contig) {
/* convert count and shared_fp to bytes */
bufsize = datatype_size * count;
off = fh->disp + fh->etype_size * shared_fp;
/* if atomic mode requested, lock (exclusive) the region, because there
could be a concurrent noncontiguous request. On NFS, locking
is done in the ADIO_ReadContig.*/
if ((fh->atomicity) && (fh->file_system != ADIO_NFS))
ADIOI_WRITE_LOCK(fh, off, SEEK_SET, bufsize);
ADIO_ReadContig(fh, buf, count, datatype, ADIO_EXPLICIT_OFFSET,
off, status, &error_code);
if ((fh->atomicity) && (fh->file_system != ADIO_NFS))
ADIOI_UNLOCK(fh, off, SEEK_SET, bufsize);
}
else ADIO_ReadStrided(fh, buf, count, datatype, ADIO_EXPLICIT_OFFSET,
shared_fp, status, &error_code);
/* For strided and atomic mode, locking is done in ADIO_ReadStrided */
return error_code;
}
void ADIOI_LUSTRE_WriteStrided(ADIO_File fd, void *buf, int count,
MPI_Datatype datatype, int file_ptr_type,
ADIO_Offset offset, ADIO_Status * status,
int *error_code)
{
/* offset is in units of etype relative to the filetype. */
ADIOI_Flatlist_node *flat_buf, *flat_file;
ADIO_Offset i_offset, sum, size_in_filetype;
int i, j, k, st_index=0;
int n_etypes_in_filetype;
ADIO_Offset num, size, n_filetypes, etype_in_filetype, st_n_filetypes;
ADIO_Offset abs_off_in_filetype=0;
int filetype_size, etype_size, buftype_size;
MPI_Aint filetype_extent, buftype_extent;
int buf_count, buftype_is_contig, filetype_is_contig;
ADIO_Offset userbuf_off;
ADIO_Offset off, req_off, disp, end_offset=0, writebuf_off, start_off;
char *writebuf;
unsigned bufsize, writebuf_len, write_sz;
ADIO_Status status1;
ADIO_Offset new_bwr_size, new_fwr_size, st_fwr_size, fwr_size=0, bwr_size, req_len;
int stripe_size;
static char myname[] = "ADIOI_LUSTRE_WriteStrided";
if (fd->hints->ds_write == ADIOI_HINT_DISABLE) {
/* if user has disabled data sieving on writes, use naive
* approach instead.
*/
ADIOI_GEN_WriteStrided_naive(fd,
buf,
count,
datatype,
file_ptr_type,
offset, status, error_code);
return;
}
*error_code = MPI_SUCCESS; /* changed below if error */
ADIOI_Datatype_iscontig(datatype, &buftype_is_contig);
ADIOI_Datatype_iscontig(fd->filetype, &filetype_is_contig);
MPI_Type_size(fd->filetype, &filetype_size);
if (!filetype_size) {
#ifdef HAVE_STATUS_SET_BYTES
MPIR_Status_set_bytes(status, datatype, 0);
#endif
*error_code = MPI_SUCCESS;
return;
}
MPI_Type_extent(fd->filetype, &filetype_extent);
MPI_Type_size(datatype, &buftype_size);
MPI_Type_extent(datatype, &buftype_extent);
etype_size = fd->etype_size;
ADIOI_Assert((buftype_size * count) == ((ADIO_Offset)(unsigned)buftype_size * (ADIO_Offset)count));
bufsize = buftype_size * count;
/* get striping info */
stripe_size = fd->hints->striping_unit;
/* Different buftype to different filetype */
if (!buftype_is_contig && filetype_is_contig) {
/* noncontiguous in memory, contiguous in file. */
ADIOI_Flatten_datatype(datatype);
flat_buf = ADIOI_Flatlist;
while (flat_buf->type != datatype)
flat_buf = flat_buf->next;
off = (file_ptr_type == ADIO_INDIVIDUAL) ? fd->fp_ind :
fd->disp + (ADIO_Offset)etype_size * offset;
start_off = off;
end_offset = start_off + bufsize - 1;
/* write stripe size buffer each time */
writebuf = (char *) ADIOI_Malloc(ADIOI_MIN(bufsize, stripe_size));
writebuf_off = 0;
writebuf_len = 0;
/* if atomicity is true, lock the region to be accessed */
if (fd->atomicity)
ADIOI_WRITE_LOCK(fd, start_off, SEEK_SET, bufsize);
for (j = 0; j < count; j++) {
for (i = 0; i < flat_buf->count; i++) {
userbuf_off = (ADIO_Offset)j * (ADIO_Offset)buftype_extent +
flat_buf->indices[i];
req_off = off;
req_len = flat_buf->blocklens[i];
ADIOI_BUFFERED_WRITE_WITHOUT_READ
off += flat_buf->blocklens[i];
}
}
/* write the buffer out finally */
ADIO_WriteContig(fd, writebuf, writebuf_len, MPI_BYTE,
ADIO_EXPLICIT_OFFSET, writebuf_off, &status1,
error_code);
if (fd->atomicity)
ADIOI_UNLOCK(fd, start_off, SEEK_SET, bufsize);
if (*error_code != MPI_SUCCESS) {
ADIOI_Free(writebuf);
return;
}
ADIOI_Free(writebuf);
if (file_ptr_type == ADIO_INDIVIDUAL)
fd->fp_ind = off;
} else {
/* noncontiguous in file */
/* filetype already flattened in ADIO_Open */
flat_file = ADIOI_Flatlist;
while (flat_file->type != fd->filetype)
flat_file = flat_file->next;
disp = fd->disp;
if (file_ptr_type == ADIO_INDIVIDUAL) {
/* Wei-keng reworked type processing to be a bit more efficient */
offset = fd->fp_ind - disp;
n_filetypes = (offset - flat_file->indices[0]) / filetype_extent;
offset -= (ADIO_Offset)n_filetypes * filetype_extent;
/* now offset is local to this extent */
/* find the block where offset is located, skip blocklens[i]==0 */
for (i=0; i<flat_file->count; i++) {
ADIO_Offset dist;
if (flat_file->blocklens[i] == 0) continue;
dist = flat_file->indices[i] + flat_file->blocklens[i] - offset;
/* fwr_size is from offset to the end of block i */
if (dist == 0) {
i++;
offset = flat_file->indices[i];
fwr_size = flat_file->blocklens[i];
break;
}
if (dist > 0) {
fwr_size = dist;
break;
}
}
st_index = i; /* starting index in flat_file->indices[] */
offset += disp + (ADIO_Offset)n_filetypes*filetype_extent;
}
else {
n_etypes_in_filetype = filetype_size/etype_size;
n_filetypes = offset / n_etypes_in_filetype;
etype_in_filetype = offset % n_etypes_in_filetype;
size_in_filetype = etype_in_filetype * etype_size;
sum = 0;
for (i = 0; i < flat_file->count; i++) {
sum += flat_file->blocklens[i];
if (sum > size_in_filetype) {
st_index = i;
fwr_size = sum - size_in_filetype;
abs_off_in_filetype = flat_file->indices[i] +
size_in_filetype - (sum - flat_file->blocklens[i]);
break;
}
}
/* abs. offset in bytes in the file */
offset = disp + (ADIO_Offset) n_filetypes *filetype_extent +
abs_off_in_filetype;
}
start_off = offset;
/* Wei-keng Liao:write request is within single flat_file
* contig block*/
/* this could happen, for example, with subarray types that are
* actually fairly contiguous */
if (buftype_is_contig && bufsize <= fwr_size) {
req_off = start_off;
req_len = bufsize;
end_offset = start_off + bufsize - 1;
writebuf = (char *) ADIOI_Malloc(ADIOI_MIN(bufsize, stripe_size));
memset(writebuf, -1, ADIOI_MIN(bufsize, stripe_size));
writebuf_off = 0;
writebuf_len = 0;
userbuf_off = 0;
ADIOI_BUFFERED_WRITE_WITHOUT_READ
/* write the buffer out finally */
ADIO_WriteContig(fd, writebuf, writebuf_len, MPI_BYTE,
ADIO_EXPLICIT_OFFSET, writebuf_off, &status1,
error_code);
if (file_ptr_type == ADIO_INDIVIDUAL) {
/* update MPI-IO file pointer to point to the first byte
* that can be accessed in the fileview. */
fd->fp_ind = offset + bufsize;
if (bufsize == fwr_size) {
do {
st_index++;
if (st_index == flat_file->count) {
st_index = 0;
n_filetypes++;
}
} while (flat_file->blocklens[st_index] == 0);
fd->fp_ind = disp + flat_file->indices[st_index]
+ (ADIO_Offset)n_filetypes*filetype_extent;
}
}
fd->fp_sys_posn = -1; /* set it to null. */
#ifdef HAVE_STATUS_SET_BYTES
MPIR_Status_set_bytes(status, datatype, bufsize);
#endif
ADIOI_Free(writebuf);
return;
}
/* Calculate end_offset, the last byte-offset that will be accessed.
e.g., if start_offset=0 and 100 bytes to be write, end_offset=99*/
st_fwr_size = fwr_size;
st_n_filetypes = n_filetypes;
i_offset = 0;
j = st_index;
off = offset;
fwr_size = ADIOI_MIN(st_fwr_size, bufsize);
while (i_offset < bufsize) {
i_offset += fwr_size;
end_offset = off + fwr_size - 1;
j = (j+1) % flat_file->count;
n_filetypes += (j == 0) ? 1 : 0;
while (flat_file->blocklens[j]==0) {
j = (j+1) % flat_file->count;
n_filetypes += (j == 0) ? 1 : 0;
}
off = disp + flat_file->indices[j] +
n_filetypes*(ADIO_Offset)filetype_extent;
fwr_size = ADIOI_MIN(flat_file->blocklens[j], bufsize-i_offset);
}
/* if atomicity is true, lock the region to be accessed */
if (fd->atomicity)
ADIOI_WRITE_LOCK(fd, start_off, SEEK_SET, end_offset-start_off+1);
writebuf_off = 0;
writebuf_len = 0;
writebuf = (char *) ADIOI_Malloc(stripe_size);
memset(writebuf, -1, stripe_size);
if (buftype_is_contig && !filetype_is_contig) {
/* contiguous in memory, noncontiguous in file. should be the most
common case. */
i_offset = 0;
j = st_index;
off = offset;
n_filetypes = st_n_filetypes;
fwr_size = ADIOI_MIN(st_fwr_size, bufsize);
while (i_offset < bufsize) {
if (fwr_size) {
/* TYPE_UB and TYPE_LB can result in
fwr_size = 0. save system call in such cases */
/* lseek(fd->fd_sys, off, SEEK_SET);
err = write(fd->fd_sys, ((char *) buf) + i_offset, fwr_size);*/
req_off = off;
req_len = fwr_size;
userbuf_off = i_offset;
ADIOI_BUFFERED_WRITE
}
i_offset += fwr_size;
if (off + fwr_size < disp + flat_file->indices[j] +
flat_file->blocklens[j] +
n_filetypes*(ADIO_Offset)filetype_extent)
off += fwr_size;
/* did not reach end of contiguous block in filetype.
no more I/O needed. off is incremented by fwr_size. */
else {
j = (j+1) % flat_file->count;
n_filetypes += (j == 0) ? 1 : 0;
while (flat_file->blocklens[j]==0) {
j = (j+1) % flat_file->count;
n_filetypes += (j == 0) ? 1 : 0;
}
off = disp + flat_file->indices[j] +
n_filetypes*(ADIO_Offset)filetype_extent;
fwr_size = ADIOI_MIN(flat_file->blocklens[j],
bufsize-i_offset);
}
}
}
else {
void ADIOI_GEN_ReadStrided(ADIO_File fd, void *buf, int count,
MPI_Datatype datatype, int file_ptr_type,
ADIO_Offset offset, ADIO_Status *status, int
*error_code)
{
/* offset is in units of etype relative to the filetype. */
ADIOI_Flatlist_node *flat_buf, *flat_file;
ADIO_Offset i_offset, new_brd_size, brd_size, size;
int i, j, k, st_index=0;
MPI_Count num, bufsize;
int n_etypes_in_filetype;
ADIO_Offset n_filetypes, etype_in_filetype, st_n_filetypes, size_in_filetype;
ADIO_Offset abs_off_in_filetype=0, new_frd_size, frd_size=0, st_frd_size;
MPI_Count filetype_size, etype_size, buftype_size, partial_read;
MPI_Aint filetype_extent, buftype_extent;
int buf_count, buftype_is_contig, filetype_is_contig;
ADIO_Offset userbuf_off, req_len, sum;
ADIO_Offset off, req_off, disp, end_offset=0, readbuf_off, start_off;
char *readbuf, *tmp_buf, *value;
int info_flag;
unsigned max_bufsize, readbuf_len;
ADIO_Status status1;
if (fd->hints->ds_read == ADIOI_HINT_DISABLE) {
/* if user has disabled data sieving on reads, use naive
* approach instead.
*/
ADIOI_GEN_ReadStrided_naive(fd,
buf,
count,
datatype,
file_ptr_type,
offset,
status,
error_code);
return;
}
*error_code = MPI_SUCCESS; /* changed below if error */
ADIOI_Datatype_iscontig(datatype, &buftype_is_contig);
ADIOI_Datatype_iscontig(fd->filetype, &filetype_is_contig);
MPI_Type_size_x(fd->filetype, &filetype_size);
if ( ! filetype_size ) {
#ifdef HAVE_STATUS_SET_BYTES
MPIR_Status_set_bytes(status, datatype, 0);
#endif
*error_code = MPI_SUCCESS;
return;
}
MPI_Type_extent(fd->filetype, &filetype_extent);
MPI_Type_size_x(datatype, &buftype_size);
MPI_Type_extent(datatype, &buftype_extent);
etype_size = fd->etype_size;
ADIOI_Assert((buftype_size * count) == ((ADIO_Offset)(MPI_Count)buftype_size * (ADIO_Offset)count));
bufsize = buftype_size * count;
/* get max_bufsize from the info object. */
value = (char *) ADIOI_Malloc((MPI_MAX_INFO_VAL+1)*sizeof(char));
ADIOI_Info_get(fd->info, "ind_rd_buffer_size", MPI_MAX_INFO_VAL, value,
&info_flag);
max_bufsize = atoi(value);
ADIOI_Free(value);
if (!buftype_is_contig && filetype_is_contig) {
/* noncontiguous in memory, contiguous in file. */
flat_buf = ADIOI_Flatten_and_find(datatype);
off = (file_ptr_type == ADIO_INDIVIDUAL) ? fd->fp_ind :
fd->disp + (ADIO_Offset)etype_size * offset;
start_off = off;
end_offset = off + bufsize - 1;
readbuf_off = off;
readbuf = (char *) ADIOI_Malloc(max_bufsize);
readbuf_len = (unsigned) (MPL_MIN(max_bufsize, end_offset-readbuf_off+1));
/* if atomicity is true, lock (exclusive) the region to be accessed */
if ((fd->atomicity) && ADIO_Feature(fd, ADIO_LOCKS))
ADIOI_WRITE_LOCK(fd, start_off, SEEK_SET, end_offset-start_off+1);
ADIO_ReadContig(fd, readbuf, readbuf_len, MPI_BYTE,
ADIO_EXPLICIT_OFFSET, readbuf_off, &status1, error_code);
if (*error_code != MPI_SUCCESS) return;
for (j=0; j<count; j++)
{
for (i=0; i<flat_buf->count; i++) {
userbuf_off = (ADIO_Offset)j*(ADIO_Offset)buftype_extent + flat_buf->indices[i];
req_off = off;
req_len = flat_buf->blocklens[i];
ADIOI_BUFFERED_READ
off += flat_buf->blocklens[i];
}
}
if ((fd->atomicity) && ADIO_Feature(fd, ADIO_LOCKS))
ADIOI_UNLOCK(fd, start_off, SEEK_SET, end_offset-start_off+1);
if (file_ptr_type == ADIO_INDIVIDUAL) fd->fp_ind = off;
ADIOI_Free(readbuf);
}
else { /* noncontiguous in file */
flat_file = ADIOI_Flatten_and_find(fd->filetype);
disp = fd->disp;
if (file_ptr_type == ADIO_INDIVIDUAL) {
/* Wei-keng reworked type processing to be a bit more efficient */
offset = fd->fp_ind - disp;
n_filetypes = (offset - flat_file->indices[0]) / filetype_extent;
offset -= (ADIO_Offset)n_filetypes * filetype_extent;
/* now offset is local to this extent */
/* find the block where offset is located, skip blocklens[i]==0 */
for (i=0; i<flat_file->count; i++) {
ADIO_Offset dist;
if (flat_file->blocklens[i] == 0) continue;
dist = flat_file->indices[i] + flat_file->blocklens[i] - offset;
/* frd_size is from offset to the end of block i */
if (dist == 0) {
i++;
offset = flat_file->indices[i];
frd_size = flat_file->blocklens[i];
break;
}
if (dist > 0) {
frd_size = dist;
break;
}
}
st_index = i; /* starting index in flat_file->indices[] */
offset += disp + (ADIO_Offset)n_filetypes*filetype_extent;
}
else {
n_etypes_in_filetype = filetype_size/etype_size;
n_filetypes = offset / n_etypes_in_filetype;
etype_in_filetype = offset % n_etypes_in_filetype;
size_in_filetype = etype_in_filetype * etype_size;
sum = 0;
for (i=0; i<flat_file->count; i++) {
sum += flat_file->blocklens[i];
if (sum > size_in_filetype) {
st_index = i;
frd_size = sum - size_in_filetype;
abs_off_in_filetype = flat_file->indices[i] +
size_in_filetype - (sum - flat_file->blocklens[i]);
break;
}
}
/* abs. offset in bytes in the file */
offset = disp + (ADIO_Offset) n_filetypes*filetype_extent +
abs_off_in_filetype;
}
start_off = offset;
/* Wei-keng Liao: read request is within a single flat_file contig
* block e.g. with subarray types that actually describe the whole
* array */
if (buftype_is_contig && bufsize <= frd_size) {
/* a count of bytes can overflow. operate on original type instead */
ADIO_ReadContig(fd, buf, count, datatype, ADIO_EXPLICIT_OFFSET,
offset, status, error_code);
if (file_ptr_type == ADIO_INDIVIDUAL) {
/* update MPI-IO file pointer to point to the first byte that
* can be accessed in the fileview. */
fd->fp_ind = offset + bufsize;
if (bufsize == frd_size) {
do {
st_index++;
if (st_index == flat_file->count) {
st_index = 0;
n_filetypes++;
}
} while (flat_file->blocklens[st_index] == 0);
fd->fp_ind = disp + flat_file->indices[st_index]
+ n_filetypes*filetype_extent;
}
}
fd->fp_sys_posn = -1; /* set it to null. */
#ifdef HAVE_STATUS_SET_BYTES
MPIR_Status_set_bytes(status, datatype, bufsize);
#endif
return;
}
/* Calculate end_offset, the last byte-offset that will be accessed.
e.g., if start_offset=0 and 100 bytes to be read, end_offset=99*/
st_frd_size = frd_size;
st_n_filetypes = n_filetypes;
i_offset = 0;
j = st_index;
off = offset;
frd_size = MPL_MIN(st_frd_size, bufsize);
while (i_offset < bufsize) {
i_offset += frd_size;
end_offset = off + frd_size - 1;
j = (j+1) % flat_file->count;
n_filetypes += (j == 0) ? 1 : 0;
while (flat_file->blocklens[j]==0) {
j = (j+1) % flat_file->count;
n_filetypes += (j == 0) ? 1 : 0;
}
off = disp + flat_file->indices[j] + n_filetypes*(ADIO_Offset)filetype_extent;
frd_size = MPL_MIN(flat_file->blocklens[j], bufsize-i_offset);
}
/* if atomicity is true, lock (exclusive) the region to be accessed */
if ((fd->atomicity) && ADIO_Feature(fd, ADIO_LOCKS))
ADIOI_WRITE_LOCK(fd, start_off, SEEK_SET, end_offset-start_off+1);
readbuf_off = 0;
readbuf_len = 0;
readbuf = (char *) ADIOI_Malloc(max_bufsize);
if (buftype_is_contig && !filetype_is_contig) {
/* contiguous in memory, noncontiguous in file. should be the most
common case. */
i_offset = 0;
j = st_index;
off = offset;
n_filetypes = st_n_filetypes;
frd_size = MPL_MIN(st_frd_size, bufsize);
while (i_offset < bufsize) {
if (frd_size) {
/* TYPE_UB and TYPE_LB can result in
frd_size = 0. save system call in such cases */
/* lseek(fd->fd_sys, off, SEEK_SET);
err = read(fd->fd_sys, ((char *) buf) + i, frd_size);*/
req_off = off;
req_len = frd_size;
userbuf_off = i_offset;
ADIOI_BUFFERED_READ
}
i_offset += frd_size;
if (off + frd_size < disp + flat_file->indices[j] +
flat_file->blocklens[j] + n_filetypes*(ADIO_Offset)filetype_extent)
off += frd_size;
/* did not reach end of contiguous block in filetype.
no more I/O needed. off is incremented by frd_size. */
else {
j = (j+1) % flat_file->count;
n_filetypes += (j == 0) ? 1 : 0;
while (flat_file->blocklens[j]==0) {
j = (j+1) % flat_file->count;
n_filetypes += (j == 0) ? 1 : 0;
}
off = disp + flat_file->indices[j] +
n_filetypes*(ADIO_Offset)filetype_extent;
frd_size = MPL_MIN(flat_file->blocklens[j], bufsize-i_offset);
}
}
}
else {
/*@
MPI_File_write - Write using individual file pointer
Input Parameters:
. fh - file handle (handle)
. buf - initial address of buffer (choice)
. count - number of elements in buffer (nonnegative integer)
. datatype - datatype of each buffer element (handle)
Output Parameters:
. status - status object (Status)
.N fortran
@*/
int MPI_File_write(MPI_File fh, void *buf, int count,
MPI_Datatype datatype, MPI_Status *status)
{
int error_code, bufsize, buftype_is_contig, filetype_is_contig;
#ifndef PRINT_ERR_MSG
static char myname[] = "MPI_FILE_WRITE";
#endif
int datatype_size;
ADIO_Offset off;
#ifdef MPI_hpux
int fl_xmpi;
HPMP_IO_START(fl_xmpi, BLKMPIFILEWRITE, TRDTBLOCK, fh, datatype, count);
#endif /* MPI_hpux */
#ifdef PRINT_ERR_MSG
if ((fh <= (MPI_File) 0) || (fh->cookie != ADIOI_FILE_COOKIE)) {
FPRINTF(stderr, "MPI_File_write: Invalid file handle\n");
MPI_Abort(MPI_COMM_WORLD, 1);
}
#else
ADIOI_TEST_FILE_HANDLE(fh, myname);
#endif
if (count < 0) {
#ifdef PRINT_ERR_MSG
FPRINTF(stderr, "MPI_File_write: Invalid count argument\n");
MPI_Abort(MPI_COMM_WORLD, 1);
#else
error_code = MPIR_Err_setmsg(MPI_ERR_ARG, MPIR_ERR_COUNT_ARG,
myname, (char *) 0, (char *) 0);
return ADIOI_Error(fh, error_code, myname);
#endif
}
if (datatype == MPI_DATATYPE_NULL) {
#ifdef PRINT_ERR_MSG
FPRINTF(stderr, "MPI_File_write: Invalid datatype\n");
MPI_Abort(MPI_COMM_WORLD, 1);
#else
error_code = MPIR_Err_setmsg(MPI_ERR_TYPE, MPIR_ERR_TYPE_NULL,
myname, (char *) 0, (char *) 0);
return ADIOI_Error(fh, error_code, myname);
#endif
}
MPI_Type_size(datatype, &datatype_size);
if (count*datatype_size == 0) {
#ifdef MPI_hpux
HPMP_IO_END(fl_xmpi, fh, datatype, count);
#endif /* MPI_hpux */
return MPI_SUCCESS;
}
if ((count*datatype_size) % fh->etype_size != 0) {
#ifdef PRINT_ERR_MSG
FPRINTF(stderr, "MPI_File_write: Only an integral number of etypes can be accessed\n");
MPI_Abort(MPI_COMM_WORLD, 1);
#else
error_code = MPIR_Err_setmsg(MPI_ERR_IO, MPIR_ERR_ETYPE_FRACTIONAL,
myname, (char *) 0, (char *) 0);
return ADIOI_Error(fh, error_code, myname);
#endif
}
if (fh->access_mode & MPI_MODE_SEQUENTIAL) {
#ifdef PRINT_ERR_MSG
FPRINTF(stderr, "MPI_File_write: Can't use this function because file was opened with MPI_MODE_SEQUENTIAL\n");
MPI_Abort(MPI_COMM_WORLD, 1);
#else
error_code = MPIR_Err_setmsg(MPI_ERR_UNSUPPORTED_OPERATION,
MPIR_ERR_AMODE_SEQ, myname, (char *) 0, (char *) 0);
return ADIOI_Error(fh, error_code, myname);
#endif
}
ADIOI_Datatype_iscontig(datatype, &buftype_is_contig);
ADIOI_Datatype_iscontig(fh->filetype, &filetype_is_contig);
/* contiguous or strided? */
if (buftype_is_contig && filetype_is_contig) {
bufsize = datatype_size * count;
/* if atomic mode requested, lock (exclusive) the region, because there
could be a concurrent noncontiguous request. Locking doesn't
work on PIOFS and PVFS, and on NFS it is done in the ADIO_WriteContig.*/
off = fh->fp_ind;
if ((fh->atomicity) && (fh->file_system != ADIO_PIOFS) &&
(fh->file_system != ADIO_PVFS) && (fh->file_system != ADIO_NFS))
ADIOI_WRITE_LOCK(fh, off, SEEK_SET, bufsize);
ADIO_WriteContig(fh, buf, count, datatype, ADIO_INDIVIDUAL,
0, status, &error_code);
if ((fh->atomicity) && (fh->file_system != ADIO_PIOFS) &&
(fh->file_system != ADIO_PVFS) && (fh->file_system != ADIO_NFS))
ADIOI_UNLOCK(fh, off, SEEK_SET, bufsize);
}
else
ADIO_WriteStrided(fh, buf, count, datatype, ADIO_INDIVIDUAL,
0, status, &error_code);
/* For strided and atomic mode, locking is done in ADIO_WriteStrided */
#ifdef MPI_hpux
HPMP_IO_END(fl_xmpi, fh, datatype, count);
#endif /* MPI_hpux */
return error_code;
}