Ejemplo n.º 1
0
void UpdatePause(void)
{
	while(pause)
	{
		StartFoxFrame();
		AESysFrameStart();

		PlayAudio(&BackgroundSnd);

		if(FoxInput_KeyTriggered(VK_ESCAPE))
		{
			pause = FALSE;
		}

		if(GetNextState() == GS_Quit || GetNextState() == GS_Restart)
		{
			pause = FALSE;
		}

		DrawPause();

		EventPause();
		
		FoxInput_Update();
		SaveSettings();
		SetChannelGroupVolume(EffectType, SFXVolume);
		SetChannelGroupVolume(MusicType, BGMVolume);
		UpdateSoundSystem();

		AESysFrameEnd();
		EndFoxFrame();
	}
	SaveSettings();
	FreePause();
}
Ejemplo n.º 2
0
int WINAPI WinMain(HINSTANCE instanceH, HINSTANCE prevInstanceH, LPSTR command_line, int show)
{
	gWIN_WIDTH = 800;
	gWIN_HEIGHT = 600;
	// Initialize the system
	AESysInit (instanceH, show);

	GameStateManager gsm;
	
	gsm.init(new GameState_StartServer());

	initSockets(true);

	while(!gsm.quit())
	{
		// reset the system modules
		AESysReset();

		// If not restarting, load the gamestate
		if(!gsm.restart())
			gsm.loadState();
		else
			gsm.restartState();

		// Initialize the gamestate
		gsm.initState();

		while(!gsm.changeState())
		{
			AESysFrameStart();

			AEInputUpdate();

			gsm.updateState();
			gsm.drawState();
			
			AESysFrameEnd();

			// check if forcing the application to quit
			gsm.quit((gAESysWinExists == false) || AEInputCheckTriggered(DIK_ESCAPE));
		}
		
		gsm.freeState();

		if(!gsm.restart())
			gsm.unloadState();

		gsm.nextState();
	}

	cleanSockets();

	// free the system
	AESysExit();
}
Ejemplo n.º 3
0
int WINAPI WinMain(HINSTANCE instanceH, HINSTANCE prevInstanceH, LPSTR command_line, int show)
{
	// Initialize the system
	AESysInit (instanceH, show);

	GameStateMgrInit(GS_ASTEROIDS);

	while(gGameStateCurr != GS_QUIT)
	{
		// reset the system modules
		AESysReset();

		// If not restarting, load the gamestate
		if(gGameStateCurr != GS_RESTART)
		{
			GameStateMgrUpdate();
			GameStateLoad();
		}
		else
			gGameStateNext = gGameStateCurr = gGameStatePrev;

		// Initialize the gamestate
		GameStateInit();

		while(gGameStateCurr == gGameStateNext)
		{
			AESysFrameStart();

			AEInputUpdate();

			GameStateUpdate();

			GameStateDraw();
			
			AESysFrameEnd();

			// check if forcing the application to quit
			if ((gAESysWinExists == false) || AEInputCheckTriggered(DIK_ESCAPE))
				gGameStateNext = GS_QUIT;
		}
		
		GameStateFree();

		if(gGameStateNext != GS_RESTART)
			GameStateUnload();

		gGameStatePrev = gGameStateCurr;
		gGameStateCurr = gGameStateNext;
	}

	// free the system
	AESysExit();
}
Ejemplo n.º 4
0
//------------------------------------------------------------------------------
// Public Functions:
//------------------------------------------------------------------------------
int WINAPI WinMain(HINSTANCE hInstance, HINSTANCE hPrevInstance, LPSTR lpCmdLine, int nCmdShow)
{
	// System Initialize
	System_Initialize(hInstance, nCmdShow);

	// GSM Initialize
	GSM_Initialize(GS_L1);

	// Game Flow
	while(Current != GS_Quit)
	{
	if(Current == GS_Restart)
	{
	Current = Previous;
	Next = Previous;
	}
	else
	{
	// GSM Update
	GSM_Update(Current);
	pLoad();
	}

	pIni();

	// Game Loop
	while(Current == Next)
	{
	AESysFrameStart();
	//Input_Handle();  »Øµ÷º¯Êý
	pUpdate();
	pDraw();
	AESysFrameEnd();
	}

	pFree();

	if(Next != GS_Restart)
	pUnload();

	Previous = Current;
	Current = Next;
	}

	// System Exit
	system("pause");
	System_Exit();

	return 0;
}
Ejemplo n.º 5
0
void GSM_MainLoop(void) {
	while (GSM_CURRENT != QUIT) {

		/* reset the system modules */
		AESysReset();

		// If not restarting, load the gamestate
		if (GSM_CURRENT == RESTART) {
			GSM_CURRENT = GSM_PREVIOUS;
			GSM_NEXT    = GSM_PREVIOUS;
		}
		else {
			GSM_Update();
			GSM_LEVEL.pLoad();
		}

		// Initialize the gamestate
		GSM_LEVEL.pInit();

		while (GSM_CURRENT == GSM_NEXT) {
			AESysFrameStart();

			AEInputUpdate();

			GSM_LEVEL.pUpdate();
			GSM_LEVEL.pDraw();

			AESysFrameEnd();

			// check if forcing the application to quit
			if ((0 == AESysDoesWindowExist()) || AEInputCheckTriggered(VK_ESCAPE))
				GSM_NEXT = QUIT;
		}

		GSM_LEVEL.pFree();

		if (GSM_NEXT != RESTART)
			GSM_LEVEL.pUnload();

		GSM_PREVIOUS = GSM_CURRENT;
		GSM_CURRENT  = GSM_NEXT;
	}

	free(ALL_LEVELS);
}
Ejemplo n.º 6
0
void GSM_MainLoop(void)
{
	while (gGameStateCurr != QUIT)
	{
		// reset the system modules
		AESysReset();

		// If not restarting, load the gamestate
		if (gGameStateCurr != RESTART)
		{
			GameStateMgrUpdate();
			GameStateLoad();
		}
		else
			gGameStateNext = gGameStateCurr = gGameStatePrev;

		// Initialize the gamestate
		GameStateInit();

		while (gGameStateCurr == gGameStateNext)
		{
			AESysFrameStart();

			AEInputUpdate();

			GameStateUpdate();

			GameStateDraw();

			AESysFrameEnd();

			// check if forcing the application to quit
			if ((0 == AESysDoesWindowExist()) || AEInputCheckTriggered(VK_ESCAPE))
				gGameStateNext = QUIT;
		}

		GameStateFree();

		if (gGameStateNext != RESTART)
			GameStateUnload();

		gGameStatePrev = gGameStateCurr;
		gGameStateCurr = gGameStateNext;
	}
}
Ejemplo n.º 7
0
int WINAPI WinMain(HINSTANCE instanceH, HINSTANCE prevInstanceH, LPSTR command_line, int show)
{
	// Variable declaration	
	float obj1X = 0.0f, obj1Y = 0.0f;		// Position variables for object 1
	AEGfxVertexList*	pMesh1;				// Pointer to Mesh (Model)
	float alpha = 1.0f;

	// Initialize the system 
	AESysInitInfo sysInitInfo;
	sysInitInfo.mCreateWindow		= 1;
	sysInitInfo.mAppInstance		= instanceH;
	sysInitInfo.mShow				= show;
	sysInitInfo.mWinWidth			= 800; 
	sysInitInfo.mWinHeight			= 600;
	sysInitInfo.mCreateConsole		= 1;
	sysInitInfo.mMaxFrameRate		= 60;
	sysInitInfo.mpWinCallBack		= NULL;//MyWinCallBack;
	sysInitInfo.mClassStyle			= CS_HREDRAW | CS_VREDRAW;											
	sysInitInfo.mWindowStyle		= WS_OVERLAPPEDWINDOW;//WS_POPUP | WS_VISIBLE | WS_SYSMENU | WS_CLIPCHILDREN | WS_CLIPSIBLINGS;;		
	sysInitInfo.mWindowHandle		= NULL;
	sysInitInfo.mHandleWindowMessages	= 1;
	AESysInit (&sysInitInfo);

	// reset the system modules
	AESysReset();

	
	// Informing the library that we're about to start adding triangles
	AEGfxMeshStart();

	// 1 triangle at a time
	// X, Y, Color, texU, texV
	AEGfxTriAdd(
		-25.5f, -25.5f, 0xFFFF0000, 0.0f, 0.0f, 
		25.5f,  0.0f, 0xFFFF0000, 0.0f, 0.0f,
		-25.5f,  25.5f, 0xFFFF0000, 0.0f, 0.0f);

	// Saving the mesh (list of triangles) in pMesh1

	pMesh1 = AEGfxMeshEnd();
	AE_ASSERT_MESG(pMesh1, "Failed to create mesh 1!!");

	
	AEGfxSetBackgroundColor(0.0f, 0.0f, 0.0f);
	AEGfxSetBlendMode(AE_GFX_BM_BLEND);

	// Game Loop
	while(gGameRunning)
	{
		// Informing the system about the loop's start
		AESysFrameStart();

		// Handling Input
		AEInputUpdate();

		
		// Object Control
		if (AEInputCheckCurr(VK_UP))
			obj1Y += 3.0f;
		else
		if (AEInputCheckCurr(VK_DOWN))
			obj1Y -= 3.0f;

		if (AEInputCheckCurr(VK_LEFT))
			obj1X -= 3.0f;
		else
		if (AEInputCheckCurr(VK_RIGHT))
			obj1X += 3.0f;

		// Alpha value
		if (AEInputCheckCurr('Z'))
			alpha -= 0.01f;
		else
		if (AEInputCheckCurr('X'))
			alpha += 0.01f;

		alpha = AEClamp(alpha, 0.0f, 1.0f);


		// Drawing object 1
		AEGfxSetRenderMode(AE_GFX_RM_COLOR);
		// Set position for object 1
		AEGfxSetPosition(obj1X, obj1Y);
		// No texture for object 1
		AEGfxTextureSet(NULL, 0, 0);
		// Drawing the mesh (list of triangles)
		AEGfxSetTransparency(alpha);
		AEGfxMeshDraw(pMesh1, AE_GFX_MDM_TRIANGLES);


		// Informing the system about the loop's end
		AESysFrameEnd();

		// check if forcing the application to quit
		if (AEInputCheckTriggered(VK_ESCAPE) || 0 == AESysDoesWindowExist())
			gGameRunning = 0;
	}

	// Freeing the objects and textures
	AEGfxMeshFree(pMesh1);

	// free the system
	AESysExit();

	return 1;
}
Ejemplo n.º 8
0
int WINAPI WinMain(HINSTANCE instanceH, HINSTANCE prevInstanceH, LPSTR command_line, int show)
{
	// Variable declaration
	unsigned char colors[16];				// 2x2 image
	float obj1X = 0.0f, obj1Y = 0.0f;		// Position variables for object 1
	float obj2X = 0.0f, obj2Y = 0.0f;		// Position variables for object 2
	float obj1texX = 0, obj1texY = 0;		// Texture variables for object 1's texture
	int counter = 0;						// Counter to swap textures
	AEGfxVertexList*	pMesh1;				// Pointer to Mesh (Model)
	AEGfxVertexList*	pMesh2;				// Pointer to Mesh (Model)
	AEGfxVertexList*	pMeshLine;			// Pointer to Mesh (Model)
	AEGfxTexture *pTex1;					// Pointer to Texture (Image)
	AEGfxTexture *pTex2;					// Pointer to Texture (Image)
	char strBuffer[256];					// Character buffer used to print text
	float camX, camY;						// Used to temporary store camera position
	float camZoom;							// USed to temporary store the camera zoom value
	s32 sx, sy;
	float x, y;
	float alpha = 1.0f;




	// Initialize the system 
	AESysInitInfo sysInitInfo;
	sysInitInfo.mCreateWindow			= 1;
	sysInitInfo.mWindowHandle			= NULL;
	sysInitInfo.mAppInstance			= instanceH;
	sysInitInfo.mShow					= show;
	sysInitInfo.mWinWidth				= 1280; 
	sysInitInfo.mWinHeight				= 800;
	sysInitInfo.mCreateConsole			= 1;
	sysInitInfo.mMaxFrameRate			= 60;
	sysInitInfo.mpWinCallBack			= NULL;
	sysInitInfo.mClassStyle				= CS_HREDRAW | CS_VREDRAW;											
	sysInitInfo.mWindowStyle			= WS_OVERLAPPEDWINDOW;
	sysInitInfo.mHandleWindowMessages	= 1;



	if(0 == AESysInit (&sysInitInfo))
		printf("System Init Failed!\n");


	// Changing the window title
	AESysSetWindowTitle("My New Title!");

	// reset the system modules
	AESysReset();

	////////////////////////////////
	// Creating the objects (Shapes)


	// Informing the library that we're about to start adding triangles
	AEGfxMeshStart();

	// 1 triangle at a time
	// X, Y, Color, texU, texV
	AEGfxTriAdd(
		-25.5f, -25.5f, 0xFFFF0000, 0.0f, 0.0f, 
		25.5f,  0.0f, 0xFFFF0000, 0.0f, 0.0f,
		-25.5f,  25.5f, 0xFFFF0000, 0.0f, 0.0f);

	// Saving the mesh (list of triangles) in pMesh1

	pMesh1 = AEGfxMeshEnd();
	AE_ASSERT_MESG(pMesh1, "Failed to create mesh 1!!");

	// Informing the library that we're about to start adding triangles
	AEGfxMeshStart();

	// This shape has 2 triangles

	AEGfxTriAdd(
		-30.0f, -30.0f, 0x00FF00FF, 0.0f, 1.0f, 
		30.0f,  -30.0f, 0x00FFFF00, 1.0f, 1.0f,
		-30.0f,  30.0f, 0x00F00FFF, 0.0f, 0.0f);

	AEGfxTriAdd(
		30.0f, -30.0f, 0x00FFFFFF, 1.0f, 1.0f, 
		30.0f,  30.0f, 0x00FFFFFF, 1.0f, 0.0f,
		-30.0f,  30.0f, 0x00FFFFFF, 0.0f, 0.0f);

	pMesh2 = AEGfxMeshEnd();
	AE_ASSERT_MESG(pMesh2, "Failed to create mesh 2!!");

		
	// Informing the library that we're about to start adding triangles
	AEGfxMeshStart();

	// This shape has 5 vertices

	AEGfxVertexAdd(0.0f, 0.0f, 0xFFFFFFFF, 0.0f, 0.0f);
	AEGfxVertexAdd(100.0f, 0.0f, 0xFFFFFFFF, 0.0f, 0.0f);
	AEGfxVertexAdd(200.0f, 150.0f, 0xFFFFFFFF, 0.0f, 0.0f);
	AEGfxVertexAdd(300.0f, -100.0f, 0xFFFFFFFF, 0.0f, 0.0f);
	AEGfxVertexAdd(100.0f, -250.0f, 0xFFFFFFFF, 0.0f, 0.0f);


	pMeshLine = AEGfxMeshEnd();
	AE_ASSERT_MESG(pMeshLine, "Failed to create mesh 2!!");


	// Creating the objects (Shapes)
	////////////////////////////////

	////////////////////////////
	// Loading textures (images)

	// Texture 1: From file
	pTex1 = AEGfxTextureLoad("PlanetTexture.png");
	AE_ASSERT_MESG(pTex1, "Failed to create texture1!!");




	// Texture 2: From memory
	// RGBA format
	colors[0] = 255;	colors[1] = 0;		colors[2] = 0;		colors[3] = 255;
	colors[4] = 0;		colors[5] = 255;	colors[6] = 0;		colors[7] = 255;
	colors[8] = 0;		colors[9] = 0;		colors[10] = 255;	colors[11] = 255;	
	colors[12] = 255;	colors[13] = 255;	colors[14] = 255;	colors[15] = 255;				

	pTex2 = AEGfxTextureLoadFromMemory(colors, 2, 2);
	AE_ASSERT_MESG(pTex2, "Failed to create texture2!!");

	// Loading a textures (images)
	//////////////////////////////

	
	AEGfxSetBackgroundColor(0.0f, 0.0f, 0.0f);
	AEGfxSetBlendMode(AE_GFX_BM_BLEND);


	// Game Loop
	while(gGameRunning)
	{
		// Informing the system about the loop's start
		AESysFrameStart();

		// Handling Input
		AEInputUpdate();

		///////////////////
		// Game loop update

		// Object Control
		if (AEInputCheckCurr(VK_UP))
			obj1Y += 3.0f;
		else
		if (AEInputCheckCurr(VK_DOWN))
			obj1Y -= 3.0f;

		if (AEInputCheckCurr(VK_LEFT))
			obj1X -= 3.0f;
		else
		if (AEInputCheckCurr(VK_RIGHT))
			obj1X += 3.0f;


		
		//printf("X = %f, Y = %f\n", obj1X, obj1Y);


		// Texture offset
		if (AEInputCheckCurr('L'))
			obj1texX += 0.01f;
		else
		if (AEInputCheckCurr('J'))
			obj1texX -= 0.01f;

		if (AEInputCheckCurr('I'))
			obj1texY += 0.01f;
		else
		if (AEInputCheckCurr('K'))
			obj1texY -= 0.01f;


		// Move the camera
		AEGfxGetCamPosition(&camX, &camY);
		if (AEInputCheckCurr('W'))
			AEGfxSetCamPosition(camX, camY + 2);
		else
		if (AEInputCheckCurr('S'))
			AEGfxSetCamPosition(camX, camY - 2);

		AEGfxGetCamPosition(&camX, &camY);
		if (AEInputCheckCurr('A'))
			AEGfxSetCamPosition(camX - 2, camY);
		else
		if (AEInputCheckCurr('D'))
			AEGfxSetCamPosition(camX + 2, camY);



		// Alpha value
		if (AEInputCheckCurr('Z'))
			alpha -= 0.01f;
		else
		if (AEInputCheckCurr('X'))
			alpha += 0.01f;

		alpha = AEClamp(alpha, 0.0f, 1.0f);


		// Blending mode
		if (AEInputCheckCurr('1'))
			AEGfxSetBlendMode(AE_GFX_BM_NONE);
		else
		if (AEInputCheckCurr('2'))
			AEGfxSetBlendMode(AE_GFX_BM_BLEND);
		else
		if (AEInputCheckCurr('3'))
			AEGfxSetBlendMode(AE_GFX_BM_ADD);


		// Texture mode
		if (AEInputCheckCurr('9'))
			AEGfxSetTextureMode(AE_GFX_TM_PRECISE);
		else
		if (AEInputCheckCurr('0'))
			AEGfxSetTextureMode(AE_GFX_TM_AVERAGE);
		

		// Game loop update
		///////////////////


		//////////////////
		// Game loop draw

		//printf("MinX: %f | MaxX: %f | MinY: %f | MaxY: %f\n", AEGfxGetWinMinX(), AEGfxGetWinMaxX(), AEGfxGetWinMinY(), AEGfxGetWinMaxY());
		printf("FrameTime %f\n", AEFrameRateControllerGetFrameTime());

		
		AEGfxSetRenderMode(AE_GFX_RM_COLOR);
		AEGfxSetPosition(0, 0);
		AEGfxLine(20, 20, 0, 1, 1, 1, 1, 200, 200, 0, 1, 1, 1, 1);
		

		AEGfxSetRenderMode(AE_GFX_RM_COLOR);
		AEGfxSetPosition(0.0f, 0.0f);
		AEGfxMeshDraw(pMeshLine, AE_GFX_MDM_LINES_STRIP);

		
		// Drawing object 1
		AEGfxSetRenderMode(AE_GFX_RM_COLOR);
		//AEGfxSetWorldOriginMode(AE_WOM_TOP_LEFT);
		// Set poisition for object 1
		//AEGfxSetPosition(obj1X, obj1Y);
		AEGfxSetFullTransformWithZOrder(obj1X, obj1Y, 0.0f, 0.0f, 1.0f, 1.0f);
		// No texture for object 1
		AEGfxTextureSet(NULL, 0, 0);
		// Drawing the mesh (list of triangles)
		AEGfxSetTransparency(alpha);
		//AEGfxSetViewportPositionAndDimensions(100, 100, 400, 300);
		AEGfxMeshDraw(pMesh1, AE_GFX_MDM_TRIANGLES);


		AEInputGetCursorPosition(&sx, &sy);


		AEGfxConvertScreenCoordinatesToWorld(sx, sy, &x, &y);
		obj2X = x;
		obj2Y = y;
	
		// Drawing object 2 - NO TINT
		// Set poisition for object 2
		AEGfxSetRenderMode(AE_GFX_RM_TEXTURE);
		//AEGfxSetPosition(100.0f, -60.0f);
		AEGfxSetFullTransformWithZOrder(100.0f, -160.0f, -10.0f, 0.0f, 1.0f, 1.0f);
		AEGfxSetTintColor(1.0f, 1.0f, 1.0f, 1.0f);
		// Set texture for object 2
		++counter;
		if(counter < 120)
			AEGfxTextureSet(pTex1, obj1texX, obj1texY);		// Same object, different texture
		else
		if(counter < 240)
			AEGfxTextureSet(pTex2, obj1texX, obj1texY);		// Same object, different texture
		else
		{
			AEGfxTextureSet(pTex1, obj1texX, obj1texY);		// Same object, different texture
			counter = 0;
		}

		AEGfxSetTransparency(alpha);

		// Drawing the mesh (list of triangles)
		AEGfxMeshDraw(pMesh2, AE_GFX_MDM_TRIANGLES);

		// Drawing object 2 - BLUE TINT
		// Set poisition for object 2
		AEGfxSetRenderMode(AE_GFX_RM_TEXTURE);
		AEGfxSetPosition(100.0f, 60.0f);
		AEGfxSetTintColor(0.0f, 0.0f, 1.0f, 1.0f);
		AEGfxSetFullTransformWithZOrder(obj2X, obj2Y, 10.0f, 0.0f, 1.0f, 1.0f);
		// Set texture for object 2
		++counter;
		if(counter < 120)
			AEGfxTextureSet(pTex1, obj1texX, obj1texY);		// Same object, different texture
		else
		if(counter < 240)
			AEGfxTextureSet(pTex2, obj1texX, obj1texY);		// Same object, different texture
		else
		{
			AEGfxTextureSet(pTex1, obj1texX, obj1texY);		// Same object, different texture
			counter = 0;
		}

		AEGfxSetTransparency(alpha);

		// Drawing the mesh (list of triangles)
		AEGfxMeshDraw(pMesh2, AE_GFX_MDM_TRIANGLES);
		//


		// Game loop draw
		//////////////////

		// Informing the system about the loop's end
		AESysFrameEnd();

		// check if forcing the application to quit
		if (AEInputCheckTriggered(VK_ESCAPE) || 0 == AESysDoesWindowExist())
			gGameRunning = 0;
	}

	// Freeing the objects and textures
	AEGfxMeshFree(pMesh1);
	AEGfxMeshFree(pMesh2);

	AEGfxTextureUnload(pTex1);
	AEGfxTextureUnload(pTex2);



	// free the system
	AESysExit();
}
Ejemplo n.º 9
0
int WINAPI WinMain(HINSTANCE instanceH, HINSTANCE prevInstanceH, LPSTR command_line, int show)
{
	// Variable declaration	
	unsigned char colors[16];				// 2x2 image
	float obj1X = 0.0f, obj1Y = 0.0f;		// Position variables for object 1
	float obj1texX = 0, obj1texY = 0;		// Texture variables for object 2's texture
	AEGfxVertexList*	pMesh1;				// Pointer to Mesh (Model)
	AEGfxVertexList*	pMesh2;				// Pointer to Mesh (Model)
	AEGfxVertexList*	pMeshLine;			// Pointer to Mesh (Model)
	AEGfxTexture *pTex1;					// Pointer to Texture (Image)
	AEGfxTexture *pTex2;					// Pointer to Texture (Image)
	float camX, camY;						// Used to temporary store camera position
	float alpha = 1.0f;

	// Initialize the system 
	AESysInitInfo sysInitInfo;
	sysInitInfo.mCreateWindow		= 1;
	sysInitInfo.mAppInstance		= instanceH;
	sysInitInfo.mShow				= show;
	sysInitInfo.mWinWidth			= 800; 
	sysInitInfo.mWinHeight			= 600;
	sysInitInfo.mCreateConsole		= 1;
	sysInitInfo.mMaxFrameRate		= 60;
	sysInitInfo.mpWinCallBack		= NULL;//MyWinCallBack;
	sysInitInfo.mClassStyle			= CS_HREDRAW | CS_VREDRAW;											
	sysInitInfo.mWindowStyle		= WS_OVERLAPPEDWINDOW;//WS_POPUP | WS_VISIBLE | WS_SYSMENU | WS_CLIPCHILDREN | WS_CLIPSIBLINGS;;		
	sysInitInfo.mWindowHandle		= NULL;
	sysInitInfo.mHandleWindowMessages	= 1;
	AESysInit (&sysInitInfo);

	// reset the system modules
	AESysReset();

	
	// Informing the library that we're about to start adding triangles
	AEGfxMeshStart();

	// 1 triangle at a time
	// X, Y, Color, texU, texV
	AEGfxTriAdd(
		-25.5f, -25.5f, 0xFFFF0000, 0.0f, 0.0f, 
		25.5f,  0.0f, 0xFFFF0000, 0.0f, 0.0f,
		-25.5f,  25.5f, 0xFFFF0000, 0.0f, 0.0f);

	// Saving the mesh (list of triangles) in pMesh1
	pMesh1 = AEGfxMeshEnd();
	AE_ASSERT_MESG(pMesh1, "Failed to create mesh 1!!");


	// Informing the library that we're about to start adding triangles
	AEGfxMeshStart();

	// This shape has 2 triangles
	AEGfxTriAdd(
		-30.0f, -30.0f, 0x00FF00FF, 0.0f, 1.0f, 
		30.0f,  -30.0f, 0x00FFFF00, 1.0f, 1.0f,
		-30.0f,  30.0f, 0x00F00FFF, 0.0f, 0.0f);

	AEGfxTriAdd(
		30.0f, -30.0f, 0x00FFFFFF, 1.0f, 1.0f, 
		30.0f,  30.0f, 0x00FFFFFF, 1.0f, 0.0f,
		-30.0f,  30.0f, 0x00FFFFFF, 0.0f, 0.0f);

	pMesh2 = AEGfxMeshEnd();
	AE_ASSERT_MESG(pMesh2, "Failed to create mesh 2!!");

		
	// Informing the library that we're about to start adding vertices
	AEGfxMeshStart();

	// This shape has 5 vertices

	AEGfxVertexAdd(0.0f, 0.0f, 0xFFFFFFFF, 0.0f, 0.0f);
	AEGfxVertexAdd(100.0f, 0.0f, 0xFFFFFFFF, 0.0f, 0.0f);
	AEGfxVertexAdd(200.0f, 150.0f, 0xFFFFFFFF, 0.0f, 0.0f);
	AEGfxVertexAdd(300.0f, -100.0f, 0xFFFFFFFF, 0.0f, 0.0f);
	AEGfxVertexAdd(100.0f, -250.0f, 0xFFFFFFFF, 0.0f, 0.0f);

	pMeshLine = AEGfxMeshEnd();
	AE_ASSERT_MESG(pMeshLine, "Failed to create mesh 2!!");



	// Texture 1: From file
	pTex1 = AEGfxTextureLoad("PlanetTexture.png");
	AE_ASSERT_MESG(pTex1, "Failed to create texture1!!");

	// Texture 2: From memory
	// RGBA format
	colors[0] = 255;	colors[1] = 0;		colors[2] = 0;		colors[3] = 255;
	colors[4] = 0;		colors[5] = 255;	colors[6] = 0;		colors[7] = 255;
	colors[8] = 0;		colors[9] = 0;		colors[10] = 255;	colors[11] = 255;	
	colors[12] = 255;	colors[13] = 255;	colors[14] = 255;	colors[15] = 255;				

	pTex2 = AEGfxTextureLoadFromMemory(colors, 2, 2);
	// This step is optional, it creates a file from the texture argument
	AE_ASSERT_MESG(pTex2, "Failed to create texture2!!");

	
	AEGfxSetBackgroundColor(0.0f, 0.0f, 0.0f);
	AEGfxSetBlendMode(AE_GFX_BM_BLEND);

	// Game Loop
	while(gGameRunning)
	{
		// Informing the system about the loop's start
		AESysFrameStart();

		// Handling Input
		AEInputUpdate();

		
		// Object Control
		if (AEInputCheckCurr(VK_UP))
			obj1Y += 3.0f;
		else
		if (AEInputCheckCurr(VK_DOWN))
			obj1Y -= 3.0f;

		if (AEInputCheckCurr(VK_LEFT))
			obj1X -= 3.0f;
		else
		if (AEInputCheckCurr(VK_RIGHT))
			obj1X += 3.0f;

		// Alpha value
		if (AEInputCheckCurr('Z'))
			alpha -= 0.01f;
		else
		if (AEInputCheckCurr('X'))
			alpha += 0.01f;

		alpha = AEClamp(alpha, 0.0f, 1.0f);


		// Move the camera
		AEGfxGetCamPosition(&camX, &camY);
		if (AEInputCheckCurr('W'))
			AEGfxSetCamPosition(camX, camY + 2);
		else
		if (AEInputCheckCurr('S'))
			AEGfxSetCamPosition(camX, camY - 2);

		AEGfxGetCamPosition(&camX, &camY);
		if (AEInputCheckCurr('A'))
			AEGfxSetCamPosition(camX - 2, camY);
		else
		if (AEInputCheckCurr('D'))
			AEGfxSetCamPosition(camX + 2, camY);

		// Texture offset
		if (AEInputCheckCurr('L'))
			obj1texX += 0.01f;
		else
		if (AEInputCheckCurr('J'))
			obj1texX -= 0.01f;

		if (AEInputCheckCurr('I'))
			obj1texY += 0.01f;
		else
		if (AEInputCheckCurr('K'))
			obj1texY -= 0.01f;


		AEGfxSetRenderMode(AE_GFX_RM_COLOR);
		AEGfxSetPosition(0.0f, 0.0f);
		AEGfxSetBlendColor(0.0f, 0.0f, 0.0, 0.0f);
		AEGfxMeshDraw(pMeshLine, AE_GFX_MDM_LINES_STRIP);


		// Drawing object 1
		AEGfxSetRenderMode(AE_GFX_RM_COLOR);
		// Set poisition for object 1
		AEGfxSetPosition(obj1X, obj1Y);
		// No texture for object 1
		AEGfxTextureSet(NULL, 0, 0);
		// Drawing the mesh (list of triangles)
		AEGfxSetTransparency(alpha);
		AEGfxSetBlendColor(0.0f, 0.0f, 0.0, 0.0f);
		AEGfxMeshDraw(pMesh1, AE_GFX_MDM_TRIANGLES);


		// Drawing object 2
		// Set position for object 2
		AEGfxSetRenderMode(AE_GFX_RM_TEXTURE);
		AEGfxSetPosition(100.0f, -60.0f);
		// Set texture for object 2
		AEGfxTextureSet(pTex1, obj1texX, obj1texY);
		AEGfxSetTransparency(1.0f);
		AEGfxSetBlendColor(0.0f, 0.0f, 0.0, 0.0f);
		// Drawing the mesh (list of triangles)
		AEGfxMeshDraw(pMesh2, AE_GFX_MDM_TRIANGLES);

		
		// Drawing object 2 again
		// Set position for object 2
		AEGfxSetRenderMode(AE_GFX_RM_TEXTURE);
		AEGfxSetPosition(-100.0f, -60.0f);
		// Set texture for object 2
		AEGfxTextureSet(pTex2, 0.0f, 0.0f);
		AEGfxSetTransparency(1.0f);
		AEGfxSetBlendColor(0.0f, 0.0f, 0.0, 0.0f);
		// Drawing the mesh (list of triangles)
		AEGfxMeshDraw(pMesh2, AE_GFX_MDM_TRIANGLES);


		
		// Drawing object 2 again and again
		// Set poisition for object 2
		AEGfxSetRenderMode(AE_GFX_RM_TEXTURE);
		AEGfxSetPosition(100.0f, 100.0f);
		// Set texture for object 2
		AEGfxTextureSet(pTex1, obj1texX, obj1texY);
		AEGfxSetTransparency(1.0f);
		AEGfxSetBlendColor(0.5f, 0.0f, 0.0, 0.75f);
		// Drawing the mesh (list of triangles)
		AEGfxMeshDraw(pMesh2, AE_GFX_MDM_TRIANGLES);


		// Informing the system about the loop's end
		AESysFrameEnd();

		// check if forcing the application to quit
		if (AEInputCheckTriggered(VK_ESCAPE) || 0 == AESysDoesWindowExist())
			gGameRunning = 0;
	}

	// Freeing the objects and textures
	AEGfxMeshFree(pMesh1);
	AEGfxMeshFree(pMesh2);
	AEGfxMeshFree(pMeshLine);
	
	AEGfxTextureUnload(pTex1);
	AEGfxTextureUnload(pTex2);


	// free the system
	AESysExit();

	return 1;
}