/*
** ===================================================================
** Method : UART_ASerialLdd1_OnBlockReceived (component AsynchroSerial)
**
** Description :
** This event is called when the requested number of data is
** moved to the input buffer.
** This method is internal. It is used by Processor Expert only.
** ===================================================================
*/
void ASerialLdd1_OnBlockReceived(LDD_TUserData *UserDataPtr)
{
register byte Flags = 0U; /* Temporary variable for flags */
(void)UserDataPtr; /* Parameter is not used, suppress unused argument warning */
if (UART_InpLen < UART_INP_BUF_SIZE) { /* Is number of bytes in the receive buffer lower than size of buffer? */
UART_InpLen++; /* Increase number of chars in the receive buffer */
InpBuffer[InpIndexW++] = (UART_TComData)BufferRead; /* Save received char to the receive buffer */
if (InpIndexW >= UART_INP_BUF_SIZE) { /* Is the index out of the receive buffer? */
InpIndexW = 0x00U; /* Set index on the first item into the receive buffer */
}
Flags |= ON_RX_CHAR; /* If yes then set the OnRxChar flag */
if (UART_InpLen == UART_INP_BUF_SIZE) { /* Is number of bytes in the receive buffer equal to the size of buffer? */
Flags |= ON_FULL_RX; /* Set flag "OnFullRxBuf" */
}
} else {
SerFlag |= FULL_RX; /* Set flag "full RX buffer" */
Flags |= ON_ERROR; /* Set the OnError flag */
}
if ((Flags & ON_ERROR) != 0U) { /* Is any error flag set? */
UART_OnError(); /* Invoke user event */
} else {
if ((Flags & ON_RX_CHAR) != 0U) { /* Is OnRxChar flag set? */
UART_OnRxChar(); /* Invoke user event */
}
if ((Flags & ON_FULL_RX) != 0U) { /* Is OnTxChar flag set? */
UART_OnFullRxBuf(); /* Invoke user event */
}
}
(void)ASerialLdd1_ReceiveBlock(ASerialLdd1_DeviceDataPtr, &BufferRead, 1U); /* Receive one data byte */
}
/*
** ===================================================================
** Method : HWEnDi (component AsynchroSerial)
**
** Description :
** Enables or disables the peripheral(s) associated with the bean.
** The method is called automatically as a part of the Enable and
** Disable methods and several internal methods.
** This method is internal. It is used by Processor Expert only.
** ===================================================================
*/
static void HWEnDi(void)
{
if (EnUser) { /* Enable device? */
(void)ASerialLdd1_Enable(ASerialLdd1_DeviceDataPtr); /* Enable device */
(void)ASerialLdd1_ReceiveBlock(ASerialLdd1_DeviceDataPtr, &BufferRead, 1U); /* Receive one data byte */
if ((COREUART_OutLen) != 0U) { /* Is number of bytes in the transmit buffer greater then 0? */
SerFlag |= RUNINT_FROM_TX; /* Set flag "running int from TX"? */
(void)ASerialLdd1_SendBlock(ASerialLdd1_DeviceDataPtr, (LDD_TData *)&OutBuffer[OutIndexR], 1U); /* Send one data byte */
}
} else {
SerFlag &= (byte)~(RUNINT_FROM_TX); /* Clear RUNINT_FROM_TX flag */
(void)ASerialLdd1_Disable(ASerialLdd1_DeviceDataPtr); /* Disable device */
}
}
/*
** ===================================================================
** Method : AS1_ASerialLdd1_OnBlockReceived (component AsynchroSerial)
**
** Description :
** This event is called when the requested number of data is
** moved to the input buffer.
** This method is internal. It is used by Processor Expert only.
** ===================================================================
*/
void ASerialLdd1_OnBlockReceived(LDD_TUserData *UserDataPtr)
{
(void)UserDataPtr; /* Parameter is not used, suppress unused argument warning */
if (AS1_InpLen < AS1_INP_BUF_SIZE) { /* Is number of bytes in the receive buffer lower than size of buffer? */
AS1_InpLen++; /* Increase number of chars in the receive buffer */
InpBuffer[InpIndexW++] = (AS1_TComData)BufferRead; /* Save received char to the receive buffer */
if (InpIndexW >= AS1_INP_BUF_SIZE) { /* Is the index out of the receive buffer? */
InpIndexW = 0x00U; /* Set index on the first item into the receive buffer */
}
} else {
SerFlag |= FULL_RX; /* Set flag "full RX buffer" */
}
(void)ASerialLdd1_ReceiveBlock(ASerialLdd1_DeviceDataPtr, &BufferRead, 1U); /* Receive one data byte */
}
/*
** ===================================================================
** Method : ASerial_ASerialLdd1_OnBlockReceived (component AsynchroSerial)
**
** Description :
** This event is called when the requested number of data is
** moved to the input buffer.
** This method is internal. It is used by Processor Expert only.
** ===================================================================
*/
void ASerialLdd1_OnBlockReceived(LDD_TUserData *UserDataPtr)
{
register byte Flags = 0U; /* Temporary variable for flags */
(void)UserDataPtr; /* Parameter is not used, suppress unused argument warning */
if ((SerFlag & CHAR_IN_RX) != 0U) { /* Is the overrun error flag set? */
SerFlag |= OVERRUN_ERR; /* If yes then set the Error flag for RecvChar/Block method */
Flags |= ON_ERROR; /* If yes then set the OnError flag */
}
SerFlag |= CHAR_IN_RX; /* Set flag "char in RX buffer" */
if ((Flags & ON_ERROR) != 0U) { /* Is any error flag set? */
ASerial_OnError(); /* Invoke user event */
} else {
ASerial_OnRxChar(); /* Invoke user event */
}
(void)ASerialLdd1_ReceiveBlock(ASerialLdd1_DeviceDataPtr, &BufferRead, 1U); /* Receive one data byte */
}
/*
** ===================================================================
** Method : Inhr1_RecvChar (component AsynchroSerial)
** Description :
** If any data is received, this method returns one character,
** otherwise it returns an error code (it does not wait for
** data). This method is enabled only if the receiver property
** is enabled.
** [Note:] Because the preferred method to handle error and
** break exception in the interrupt mode is to use events
** <OnError> and <OnBreak> the return value ERR_RXEMPTY has
** higher priority than other error codes. As a consequence the
** information about an exception in interrupt mode is returned
** only if there is a valid character ready to be read.
** Parameters :
** NAME - DESCRIPTION
** * Chr - Pointer to a received character
** Returns :
** --- - Error code, possible codes:
** ERR_OK - OK
** ERR_SPEED - This device does not work in
** the active speed mode
** ERR_RXEMPTY - No data in receiver
** ERR_BREAK - Break character is detected
** (only when the <Interrupt service> property
** is disabled and the <Break signal> property
** is enabled)
** ERR_COMMON - common error occurred (the
** <GetError> method can be used for error
** specification)
** ===================================================================
*/
byte Inhr1_RecvChar(Inhr1_TComData *Chr)
{
byte Result = ERR_OK; /* Return error code */
LDD_SERIAL_TError SerialErrorMask; /* Serial error mask variable */
ASerialLdd1_Main(ASerialLdd1_DeviceDataPtr);
if (ASerialLdd1_GetError(ASerialLdd1_DeviceDataPtr, &SerialErrorMask) == ERR_OK) { /* Get error state */
if (SerialErrorMask != 0U) {
Result = ERR_COMMON; /* If yes then set common error value */
} else {
if (ASerialLdd1_GetReceivedDataNum(ASerialLdd1_DeviceDataPtr) == 0U) { /* Is not received char? */
return ERR_RXEMPTY; /* If yes then error is returned */
}
}
}
*Chr = BufferRead; /* Read the char */
(void)ASerialLdd1_ReceiveBlock(ASerialLdd1_DeviceDataPtr, &BufferRead, 1U); /* Receive one data byte */
ASerialLdd1_Main(ASerialLdd1_DeviceDataPtr);
return Result; /* Return error code */
}
/*
** ===================================================================
** Method : HWEnDi (component AsynchroSerial)
**
** Description :
** Enables or disables the peripheral(s) associated with the bean.
** The method is called automatically as a part of the Enable and
** Disable methods and several internal methods.
** This method is internal. It is used by Processor Expert only.
** ===================================================================
*/
static void HWEnDi(void)
{
(void)ASerialLdd1_ReceiveBlock(ASerialLdd1_DeviceDataPtr, &BufferRead, 1U); /* Receive one data byte */
}
