* is the hardware abstraction layer.
* We do not need transmission for now, so we set transmission DAC channel to 0.
*/
afsk_init(&afsk, ADC_CH, 0);
/*
* Here we initialize AX25 context, the channel (KFile) we are going to read messages
* from and the callback that will be called on incoming messages.
*/
ax25_init(&ax25, &afsk.fd, message_callback);
/* Initialize serial port, we are going to use it to show APRS messages*/
ser_init(&ser, SER_UART0);
ser_setbaudrate(&ser, 115200L);
}
static AX25Call path[] = AX25_PATH(AX25_CALL("apzbrt", 0), AX25_CALL("nocall", 0), AX25_CALL("wide1", 1), AX25_CALL("wide2", 2));
#define APRS_MSG ">Test BeRTOS APRS http://www.bertos.org"
int main(void)
{
init();
ticks_t start = timer_clock();
while (1)
{
/*
* This function will look for new messages from the AFSK channel.
* It will call the message_callback() function when a new message is received.
* If there's nothing to do, this function will call cpu_relax()
*/
/* constants ================================================================ */
// Les constantes ci_dessous peuvent être modifiées au besoin par l'utilisateur
// Baudrate de la liaison série en baud
#define SER_BAUDRATE 38400
// Période d'envoi des trames en ms
#define TX_PERIOD_MS 2000
// Station destination de la trame envoyée
#define APRS_DST "tlm100"
// Station source de la trame envoyée
#define APRS_SRC "nocall"
// Information APRS envoyé
#define APRS_MSG ">Test %05u SolarPi APRS http://www.btssn.net"
/* private variables ======================================================== */
static xAx25 ax25;
static xAx25Node path[] = AX25_PATH(AX25_CALL(APRS_DST, 0), AX25_CALL(APRS_SRC, 0));
/* internal public functions ================================================ */
int
main(void) {
vLedInit();
vSerialInit (SER_BAUDRATE/100, SERIAL_DEFAULT + SERIAL_WR);
vAfskInit (AFSK_MODE_NOBLOCK);
vAx25Init (&ax25, &xAfskPort, &xAfskPort, NULL);
sei();
for (;;) {
static uint16_t usCount;
char msg[80];
// Numérotation de la trame afin de suivre la perte éventuelle à la
*/
afsk_init(&afsk, ADC_CH, 0);
/*
* Here we initialize AX25 context, the channel (KFile) we are going to read messages
* from and the callback that will be called on incoming messages.
*/
ax25_init(&ax25, &afsk.fd, message_callback);
#if 1
/* Initialize serial port, we are going to use it to show APRS messages*/
ser_init(&ser, SER_UART0);
ser_setbaudrate(&ser, 115200L);
#endif
}
static AX25Call path[] = AX25_PATH(AX25_CALL(CALL_BERTOS_APRS, 0), AX25_CALL("", 0), AX25_CALL("wide1", 1), AX25_CALL("wide2", 2));
int main(void)
{
init();
ticks_t start = timer_clock();
unsigned char x = 0;
// FIXME
memcpy(path[1].call, MYCALL, 6);
path[1].ssid = MYCALL_SSID;
while (1)
{
/* As long as CONFIG_AFSK_RXTIMEOUT is set to 0, this function won't block and return immediately. */
ax25_poll(&ax25);
