// 并行处理
VOID CY001Drv::DeviceIoControlParallel(IN WDFQUEUE Queue,
IN WDFREQUEST Request,
IN size_t OutputBufferLength,
IN size_t InputBufferLength,
IN ULONG IoControlCode)
{
NTSTATUS status = STATUS_SUCCESS;
ULONG ulRetLen = 0;
size_t size = 0;
void* pBufferInput = NULL;
void* pBufferOutput = NULL;
KDBG(DPFLTR_INFO_LEVEL, "[DeviceIoControlParallel] CtlCode:0x%0.8X", IoControlCode);
// 取得输入缓冲区，判断其有效性
if(InputBufferLength){
status = WdfRequestRetrieveInputBuffer(Request, InputBufferLength, &pBufferInput, &size);
if(status != STATUS_SUCCESS || pBufferInput == NULL || size < InputBufferLength){
WdfRequestComplete(Request, STATUS_INVALID_PARAMETER);
return;
}
}
// 取得输出缓冲区，判断其有效性
if(OutputBufferLength){
status = WdfRequestRetrieveOutputBuffer(Request, OutputBufferLength, &pBufferOutput, &size);
if(status != STATUS_SUCCESS || pBufferOutput == NULL || size < OutputBufferLength){
WdfRequestComplete(Request, STATUS_INVALID_PARAMETER);
return;
}
}
//
// 下面是主处理过程。
//
switch(IoControlCode)
{
// 取得驱动的版本信息
case IOCTL_GET_DRIVER_VERSION:
{
PDRIVER_VERSION pVersion = (PDRIVER_VERSION)pBufferOutput;
ULONG length;
char tcsBuffer[120];
KDBG(DPFLTR_INFO_LEVEL, "IOCTL_GET_DRIVER_VERSION");
if(OutputBufferLength < sizeof(DRIVER_VERSION)){
status = STATUS_BUFFER_TOO_SMALL;
break;
}
pVersion->DriverType = DR_WDF;
pVersion->FirmwareType = FW_NOT_CY001;
ulRetLen = sizeof(DRIVER_VERSION);// 告示返回长度
// 根据String描述符，判断Firmware代码是否已经被加载。
GetStringDes(2, 0, tcsBuffer, 120, &length);
if(length){
WCHAR* pCyName = L"CY001 V";
size_t len;
int nIndex;
if(length < 8)
break;
RtlStringCchLengthW(pCyName, 7, &len);
for(nIndex = 0; nIndex < len; nIndex++){
if(pCyName[nIndex] != ((WCHAR*)tcsBuffer)[nIndex])
break;
}
if(nIndex == len)
pVersion->FirmwareType = FW_CY001; // 完全相符，说明新版Firmware已经加载到开发板。
}
break;
}
// 收到App发送过来的一个同步Request，我们应该把它保存到同步Queue中，等到有同步事件发生的时候再从Queue中取出并完成。
case IOCTL_USB_SYNC:
KDBG(DPFLTR_INFO_LEVEL, "IOCTL_USB_SYNC");
status = WdfRequestForwardToIoQueue(Request, m_hAppSyncManualQueue);
// 直接返回，不调用WdfRequestComplete函数。
// 请求者将不会为此而等待；请求的完成在将来的某个时刻。
// 这就是所谓的异步处理之要义了。
if(NT_SUCCESS(status))
return;
break;
// 清空同步队列中的所有请求
case IOCTL_USB_SYNC_RELEASE:
KDBG(DPFLTR_INFO_LEVEL, "IOCTL_USB_SYNC");
ClearSyncQueue();
break;
// 应用程序退出，取消所有被阻塞的请求。
case IOCTL_APP_EXIT_CANCEL:
// 取消USB设备的所有IO操作。它将连带取消所有Pipe的IO操作。
//WdfIoTargetStop(WdfUsbTargetDeviceGetIoTarget(m_hUsbDevice), WdfIoTargetCancelSentIo);
break;
// 取得当前的配置号.总是设置为0,因为在WDF框架中,0以外的配置是不被支持的。
case IOCTL_USB_GET_CURRENT_CONFIG:
{
KDBG(DPFLTR_INFO_LEVEL, "IOCTL_USB_GET_CURRENT_CONFIG");
if(InputBufferLength < 4){
status = STATUS_INVALID_PARAMETER;
break;
}
*(PULONG)pBufferInput = 0;// 直接赋值0，即总是选择0号配置。也可以发送URB到总线获取当前配置选项。
ulRetLen = sizeof(ULONG);
break;
}
case IOCTL_USB_ABORTPIPE:
{
ULONG pipenum = *((PULONG) pBufferOutput);
KDBG(DPFLTR_INFO_LEVEL, "IOCTL_USB_ABORTPIPE");
status = AbortPipe(pipenum);
}
break;
// 获取Pipe信息
case IOCTL_USB_GET_PIPE_INFO:
{
// 遍历获取Pipe信息，复制到输出缓冲中。
BYTE byCurSettingIndex = 0;
BYTE byPipeNum = 0;
BYTE index;
USB_INTERFACE_DESCRIPTOR interfaceDescriptor;
WDF_USB_PIPE_INFORMATION pipeInfor;
KDBG(DPFLTR_INFO_LEVEL, "IOCTL_USB_GET_PIPE_INFO");
// 取得Pipe数。根据Pipe数计算缓冲区长度
byCurSettingIndex = WdfUsbInterfaceGetConfiguredSettingIndex(m_hUsbInterface);
WdfUsbInterfaceGetDescriptor(m_hUsbInterface, byCurSettingIndex, &interfaceDescriptor);
byPipeNum = WdfUsbInterfaceGetNumConfiguredPipes(m_hUsbInterface);
if(OutputBufferLength < byPipeNum * sizeof(pipeInfor)){
status = STATUS_BUFFER_TOO_SMALL; // 缓冲区不足
}else{
ulRetLen = byPipeNum*sizeof(pipeInfor);
// 遍历获取全部管道信息，拷贝到输出缓冲中。
// 应用程序得到输出缓冲的时候，也应该使用WDF_USB_PIPE_INFORMATION结构体解析缓冲区。
for(index = 0; index < byPipeNum; index++)
{
WDF_USB_PIPE_INFORMATION_INIT(&pipeInfor);
WdfUsbInterfaceGetEndpointInformation(m_hUsbInterface, byCurSettingIndex, index, &pipeInfor);
RtlCopyMemory((PUCHAR)pBufferOutput + index*pipeInfor.Size, &pipeInfor, sizeof(pipeInfor));
}
}
}
break;
// 获取设备描述符
case IOCTL_USB_GET_DEVICE_DESCRIPTOR:
{
USB_DEVICE_DESCRIPTOR UsbDeviceDescriptor;
WdfUsbTargetDeviceGetDeviceDescriptor(m_hUsbDevice, &UsbDeviceDescriptor);
KDBG(DPFLTR_INFO_LEVEL, "IOCTL_USB_GET_DEVICE_DESCRIPTOR");
// 判断输入缓冲区的长度是否足够长
if(OutputBufferLength < UsbDeviceDescriptor.bLength)
status = STATUS_BUFFER_TOO_SMALL;
else{
RtlCopyMemory(pBufferOutput, &UsbDeviceDescriptor, UsbDeviceDescriptor.bLength);
ulRetLen = UsbDeviceDescriptor.bLength;
}
break;
}
// 获取字符串描述符
case IOCTL_USB_GET_STRING_DESCRIPTOR:
{
PGET_STRING_DESCRIPTOR Input = (PGET_STRING_DESCRIPTOR)pBufferInput;
KDBG(DPFLTR_INFO_LEVEL, "IOCTL_USB_GET_STRING_DESCRIPTOR");
status = GetStringDes(Input->Index, Input->LanguageId, pBufferOutput, OutputBufferLength, &ulRetLen);
// 由字符长度调整为字节长度
if(NT_SUCCESS(status) && ulRetLen > 0)
ulRetLen *= (sizeof(WCHAR)/sizeof(char));
break;
}
// 获取配置描述信息。
case IOCTL_USB_GET_CONFIGURATION_DESCRIPTOR:
{
KDBG(DPFLTR_INFO_LEVEL, "IOCTL_USB_GET_CONFIGURATION_DESCRIPTOR");
// 首先获得配置描述符的长度。
status = WdfUsbTargetDeviceRetrieveConfigDescriptor(m_hUsbDevice, NULL, (USHORT*)&size);
if(!NT_SUCCESS(status) && status != STATUS_BUFFER_TOO_SMALL)
break;
// 输出缓冲区不够长
if(OutputBufferLength < size)
break;
// 正式取得配置描述符。
status = WdfUsbTargetDeviceRetrieveConfigDescriptor(m_hUsbDevice, pBufferOutput, (USHORT*)&size);
if(!NT_SUCCESS(status))
break;
ulRetLen = size;
break;
}
// 根据可选值配置接口
case IOCTL_USB_SET_INTERFACE:
{
BYTE byAlterSetting = *(BYTE*)pBufferInput;
BYTE byCurSetting = WdfUsbInterfaceGetConfiguredSettingIndex(m_hUsbInterface); // 当前Alternate值
KDBG(DPFLTR_INFO_LEVEL, "IOCTL_USB_SETINTERFACE");
if(InputBufferLength < 1 || OutputBufferLength < 1)
{
status = STATUS_BUFFER_TOO_SMALL;
break;
}
// 如果传入的可选值与当前的不同，则重新配置接口；
// 否则直接返回。
if(byCurSetting != byAlterSetting)
{
WDF_USB_INTERFACE_SELECT_SETTING_PARAMS par;
WDF_USB_INTERFACE_SELECT_SETTING_PARAMS_INIT_SETTING(&par, byAlterSetting);
status = WdfUsbInterfaceSelectSetting(m_hUsbInterface, NULL, &par);
}
*(BYTE*)pBufferOutput = byCurSetting;
break;
}
// 固件Rest。自定义命令，与Port Rest是两码事。
case IOCTL_USB_FIRMWRAE_RESET:
{
KDBG(DPFLTR_INFO_LEVEL, "IOCTL_USB_FIRMWRAE_RESET");
if(InputBufferLength < 1 || pBufferInput == NULL)
status = STATUS_INVALID_PARAMETER;
else
status = FirmwareReset(*(char*)pBufferInput);
break;
}
// 重置USB总线端口
case IOCTL_USB_PORT_RESET:
{
KDBG(DPFLTR_INFO_LEVEL, "IOCTL_USB_PORT_RESET");
WdfUsbTargetDeviceResetPortSynchronously(m_hUsbDevice);
break;
}
// 管道重置
case IOCTL_USB_PIPE_RESET:
{
UCHAR uchPipe;
WDFUSBPIPE pipe = NULL;
KDBG(DPFLTR_INFO_LEVEL, "IOCTL_USB_PIPE_RESET");
if(InputBufferLength < 1){
status = STATUS_INVALID_PARAMETER;
break;
}
// 根据ID找到对应的Pipe
uchPipe = *(UCHAR*)pBufferInput;
pipe = WdfUsbInterfaceGetConfiguredPipe(m_hUsbInterface, uchPipe, NULL);
if(pipe == NULL){
status = STATUS_INVALID_PARAMETER;
break;
}
status = WdfUsbTargetPipeResetSynchronously(pipe, NULL, NULL);
break;
}
// 中断管道，放弃管道当前正在进行的操作
case IOCTL_USB_PIPE_ABORT:
{
UCHAR uchPipe;
WDFUSBPIPE pipe = NULL;
KDBG(DPFLTR_INFO_LEVEL, "IOCTL_USB_PIPE_ABORT");
if(InputBufferLength < 1){
status = STATUS_INVALID_PARAMETER;
break;
}
// 根据ID找到对应的Pipe
uchPipe = *(UCHAR*)pBufferInput;
pipe = WdfUsbInterfaceGetConfiguredPipe(m_hUsbInterface, uchPipe, NULL);
if(pipe == NULL){
status = STATUS_INVALID_PARAMETER;
break;
}
status = WdfUsbTargetPipeAbortSynchronously(pipe, NULL, NULL);
break;
}
// 取得驱动错误信息，驱动总是把最后一次发现的错误保存在设备对象的环境块中。
// 这个逻辑虽然实现了，但目前的版本中，应用程序并没有利用这个接口。
case IOCTL_USB_GET_LAST_ERROR:
{
KDBG(DPFLTR_INFO_LEVEL, "IOCTL_USB_GET_LAST_ERROR");
if (OutputBufferLength >= sizeof(ULONG))
*((PULONG)pBufferOutput) = m_ulLastUSBErrorStatusValue;
else
status = STATUS_BUFFER_TOO_SMALL;
ulRetLen = sizeof(ULONG);
break;
}
// Clear feature命令
case IOCTL_USB_SET_CLEAR_FEATURE:
{
KDBG(DPFLTR_INFO_LEVEL, "IOCTL_USB_SET_CLEAR_FEATURE");
status = UsbSetOrClearFeature(Request);
break;
}
// 为USB设备加载固件程序。带有偏移量参数，用这个分支；不带偏移量，可用下一个分支。
// 带偏移量的情况下，固件代码是一段一段地加载；
// 不带偏移量的情况，固件代码作为一整块一次性被加载。
case IOCTL_FIRMWARE_UPLOAD_OFFSET:
{
void* pData = pBufferOutput;
WORD offset = 0;
KDBG(DPFLTR_INFO_LEVEL, "IOCTL_FIRMWARE_UPLOAD_OFFSET");
if(InputBufferLength < sizeof(WORD)){
status = STATUS_INVALID_PARAMETER;
break;
}
offset = *(WORD*)pBufferInput;
status = FirmwareUpload((PUCHAR)pData, OutputBufferLength, offset);
break;
}
// 为USB设备加载固件程序。
case IOCTL_FIRMWARE_UPLOAD:
{
void* pData = pBufferOutput;
KDBG(DPFLTR_INFO_LEVEL, "IOCTL_FIRMWARE_UPLOAD");
status = FirmwareUpload((PUCHAR)pData, InputBufferLength, 0);
break;
}
// 读取开发板设备的RAM内容。RAM也就是内存。
// 每次从同一地址读取的内容可能不尽相同，开发板中固件程序在不断运行，RAM被用来储数据（包括临时数据）。
case IOCTL_FIRMWARE_READ_RAM:
{
KDBG(DPFLTR_INFO_LEVEL, "IOCTL_FIRMWARE_READ_RAM");
status = ReadRAM(Request, &ulRetLen);// inforVal中保存读取的长度
break;
}
// 其他的请求
default:
{
// 一律转发到SerialQueue中去。
WdfRequestForwardToIoQueue(Request, m_hIoCtlSerialQueue);
// 命令转发之后，这里必须直接返回，千万不可调用WdfRequestComplete函数。
// 否则会导致一个Request被完成两次的错误。
return;
}
}
// 完成请求
WdfRequestCompleteWithInformation(Request, status, ulRetLen);
}
/*++
Routine Description:
This event is called when the framework receives IRP_MJ_DEVICE_CONTROL
requests from the system.
Arguments:
Queue - Handle to the framework queue object that is associated
with the I/O request.
Request - Handle to a framework request object.
OutputBufferLength - length of the request's output buffer,
if an output buffer is available.
InputBufferLength - length of the request's input buffer,
if an input buffer is available.
IoControlCode - the driver-defined or system-defined I/O control code
(IOCTL) that is associated with the request.
Return Value:
VOID
--*/
VOID PSDrv_EvtIoDeviceControl(IN WDFQUEUE Queue, IN WDFREQUEST Request, IN size_t OutputBufferLength, IN size_t InputBufferLength, IN ULONG IoControlCode)
{
WDFDEVICE device;
PVOID ioBuffer;
size_t bufLength;
NTSTATUS status;
PDEVICE_CONTEXT pDevContext;
PFILE_CONTEXT pFileContext;
ULONG length = 0;
PSUSBDRV_PIPE_PROPERTY* pPipeProp;
PSUSBDRV_CONTROL_TRANSFER* pControlTransfer;
PSUSBDRV_DRIVER_VERSION* pDriverVersion;
PSUSBDRV_INTERFACE_PROPERTY* pInterfaceProperty;
unsigned int* pnDeviceSpeed;
WDFMEMORY WdfMem = NULL;
PUCHAR pControlBuffer;
WDFMEMORY WdfMemOut = NULL;
WDF_USB_INTERFACE_SELECT_SETTING_PARAMS selectSettingParams;
UNREFERENCED_PARAMETER(InputBufferLength);
PSDrv_DbgPrint(3, ("PSDrv_EvtIoDeviceControl - begins\n"));
PAGED_CODE();
// initialize variables
device = WdfIoQueueGetDevice(Queue);
pDevContext = GetDeviceContext(device);
switch(IoControlCode)
{
case IOCTL_PSDRV_RESET_PIPE:
PSDrv_DbgPrint(3, ("IOControl: ResetPipe\n"));
pFileContext = GetFileContext(WdfRequestGetFileObject(Request));
if (pFileContext->Pipe == NULL)
{
PSDrv_DbgPrint(3, ("Invalid pipe!\n"));
status = STATUS_INVALID_PARAMETER;
}
else
{
status = ResetPipe(pFileContext->Pipe);
}
break;
case IOCTL_PSDRV_ABORT_PIPE:
PSDrv_DbgPrint(3, ("IOControl: AbortPipe\n"));
pFileContext = GetFileContext(WdfRequestGetFileObject(Request));
if (pFileContext->Pipe == NULL)
{
PSDrv_DbgPrint(3, ("Invalid pipe!\n"));
status = STATUS_INVALID_PARAMETER;
}
else
{
status = AbortPipe(pFileContext->Pipe);
}
break;
case IOCTL_PSDRV_GET_CONFIG_DESCRIPTOR:
PSDrv_DbgPrint(3, ("IOControl: GetConfigDescriptor\n"));
if (pDevContext->UsbConfigurationDescriptor)
{
length = pDevContext->UsbConfigurationDescriptor->wTotalLength;
status = WdfRequestRetrieveOutputBuffer(Request, length, &ioBuffer, &bufLength);
if(!NT_SUCCESS(status))
{
PSDrv_DbgPrint(1, ("WdfRequestRetrieveOutputBuffer failed! (Status = %x)\n", status));
status = STATUS_INVALID_PARAMETER;
break;
}
RtlCopyMemory(ioBuffer, pDevContext->UsbConfigurationDescriptor, length);
status = STATUS_SUCCESS;
}
else
{
PSDrv_DbgPrint(3, ("UsbConfigurationDescriptor is NULL!\n"));
status = STATUS_INVALID_DEVICE_STATE;
}
break;
case IOCTL_PSDRV_RESET_DEVICE:
PSDrv_DbgPrint(3, ("IOControl: ResetDevice\n"));
status = ResetDevice(device);
break;
case IOCTL_PSDRV_CONTROL_TRANSFER:
PSDrv_DbgPrint(3, ("IOControl: ControlTransfer\n"));
//Get a pointer to the input buffer
status = WdfRequestRetrieveInputMemory(Request, &WdfMem);
if(!NT_SUCCESS(status))
{
PSDrv_DbgPrint(1, ("WdfRequestRetrieveInputMemory failed! (Status = %x)\n", status));
status = STATUS_INVALID_PARAMETER;
break;
}
if (WdfMem == NULL)
{
PSDrv_DbgPrint(1, ("WdfMem is NULL!\n"));
status = STATUS_INVALID_PARAMETER;
break;
}
pControlTransfer = WdfMemoryGetBuffer(WdfMem, NULL);
if (pControlTransfer == NULL)
{
PSDrv_DbgPrint(1, ("pControlTransfer is NULL!\n"));
status = STATUS_INVALID_PARAMETER;
break;
}
//Get a pointer to the output buffer
if (OutputBufferLength != 0)
{
status = WdfRequestRetrieveOutputMemory(Request, &WdfMemOut);
if(!NT_SUCCESS(status))
{
PSDrv_DbgPrint(1, ("WdfRequestRetrieveOutputMemory failed! (Status = %x)\n", status));
status = STATUS_INVALID_PARAMETER;
break;
}
if (WdfMemOut == NULL)
{
PSDrv_DbgPrint(1, ("WdfMemOut is NULL!\n"));
status = STATUS_INVALID_PARAMETER;
break;
}
pControlBuffer = WdfMemoryGetBuffer(WdfMemOut, NULL);
if (pControlBuffer == NULL)
{
PSDrv_DbgPrint(1, ("pControlBuffer is NULL!\n"));
status = STATUS_INVALID_PARAMETER;
break;
}
}
else
{
PSDrv_DbgPrint(1, ("This control request has no buffer...\n"));
pControlBuffer = NULL;
}
// Call the control transfer function
status = ControlTransfer(pDevContext, pControlTransfer, pControlBuffer, OutputBufferLength, &length);
break;
case IOCTL_PSDRV_SET_PIPE_PROPERTY:
PSDrv_DbgPrint(3, ("IOControl: SetPipeProperty\n"));
status = WdfRequestRetrieveInputMemory(Request, &WdfMem);
if(!NT_SUCCESS(status))
{
PSDrv_DbgPrint(1, ("WdfRequestRetrieveInputMemory failed! (Status = %x)\n", status));
status = STATUS_INVALID_PARAMETER;
break;
}
if (WdfMem == NULL)
{
PSDrv_DbgPrint(1, ("WdfMem is NULL!\n"));
status = STATUS_INVALID_PARAMETER;
break;
}
pPipeProp = WdfMemoryGetBuffer(WdfMem, NULL);
if (pPipeProp == NULL)
{
PSDrv_DbgPrint(1, ("pPipeProp is NULL!\n"));
status = STATUS_INVALID_PARAMETER;
break;
}
pFileContext = GetFileContext(WdfRequestGetFileObject(Request));
if (pFileContext->Pipe == NULL)
{
PSDrv_DbgPrint(3, ("Invalid pipe!\n"));
status = STATUS_INVALID_PARAMETER;
}
else
{
status = SetPipeProperty(pFileContext, pPipeProp);
}
break;
case IOCTL_PSDRV_SET_INTERFACE:
PSDrv_DbgPrint(3, ("IOControl: SetInterface\n"));
status = WdfRequestRetrieveInputMemory(Request, &WdfMem);
if(!NT_SUCCESS(status))
{
PSDrv_DbgPrint(1, ("WdfRequestRetrieveInputMemory failed! (Status = %x)\n", status));
status = STATUS_INVALID_PARAMETER;
break;
}
if (WdfMem == NULL)
{
PSDrv_DbgPrint(1, ("WdfMem is NULL!\n"));
status = STATUS_INVALID_PARAMETER;
break;
}
pInterfaceProperty = WdfMemoryGetBuffer(WdfMem, NULL);
if (pInterfaceProperty == NULL)
{
PSDrv_DbgPrint(1, ("pInterfaceProperty is NULL!\n"));
status = STATUS_INVALID_PARAMETER;
break;
}
PSDrv_DbgPrint(3, ("SetInterface: Going to change AltIF to %d...\n", pInterfaceProperty->nAltIF));
WDF_USB_INTERFACE_SELECT_SETTING_PARAMS_INIT_SETTING(&selectSettingParams, pInterfaceProperty->nAltIF);
status = WdfUsbInterfaceSelectSetting(pDevContext->UsbInterface, WDF_NO_OBJECT_ATTRIBUTES, &selectSettingParams);
if (status == STATUS_SUCCESS)
{
pDevContext->nCurrIf = 0;
pDevContext->nCurrAltIf = pInterfaceProperty->nAltIF;
PSDrv_DbgPrint(3, ("SetInterface: AltIF is now %d...\n", pInterfaceProperty->nAltIF));
}
break;
case IOCTL_PSDRV_GET_INTERFACE:
PSDrv_DbgPrint(3, ("IOControl: GetInterface\n"));
length = sizeof(PSUSBDRV_INTERFACE_PROPERTY);
status = WdfRequestRetrieveOutputBuffer(Request, length, &pInterfaceProperty, &bufLength);
if(!NT_SUCCESS(status))
{
PSDrv_DbgPrint(1, ("WdfRequestRetrieveOutputBuffer failed! (Status = %x)\n", status));
status = STATUS_INVALID_PARAMETER;
break;
}
pInterfaceProperty->nIF = pDevContext->nCurrIf;
pInterfaceProperty->nAltIF = pDevContext->nCurrAltIf;
status = STATUS_SUCCESS;
break;
case IOCTL_PSDRV_GET_DRIVER_VERSION:
PSDrv_DbgPrint(3, ("IOControl: GetDriverVersion\n"));
length = sizeof(PSUSBDRV_DRIVER_VERSION);
status = WdfRequestRetrieveOutputBuffer(Request, length, &pDriverVersion, &bufLength);
if(!NT_SUCCESS(status))
{
PSDrv_DbgPrint(1, ("WdfRequestRetrieveOutputBuffer failed! (Status = %x)\n", status));
status = STATUS_INVALID_PARAMETER;
break;
}
pDriverVersion->nMajor = PSUSBDRV_MAJOR_VERSION;
pDriverVersion->nMinor = PSUSBDRV_MINOR_VERSION;
pDriverVersion->nMaintenance = PSUSBDRV_MAINTENANCE_VERSION;
pDriverVersion->nBuild = PSUSBDRV_BUILD_VERSION;
status = STATUS_SUCCESS;
break;
case IOCTL_PSDRV_GET_DEVICE_SPEED:
PSDrv_DbgPrint(3, ("IOControl: GetDeviceSpeed\n"));
length = sizeof(unsigned int);
status = WdfRequestRetrieveOutputBuffer(Request, length, &pnDeviceSpeed, &bufLength);
if(!NT_SUCCESS(status))
{
PSDrv_DbgPrint(1, ("WdfRequestRetrieveOutputBuffer failed! (Status = %x)\n", status));
status = STATUS_INVALID_PARAMETER;
break;
}
if (pDevContext->IsDeviceHighSpeed == TRUE)
{
*pnDeviceSpeed = PSUSBDRV_DEVICE_HIGH_SPEED;
}
else
{
*pnDeviceSpeed = PSUSBDRV_DEVICE_FULL_SPEED;
}
break;
default:
PSDrv_DbgPrint(3, ("Unknown IOControl! (ControlCode = %x)\n", IoControlCode));
status = STATUS_INVALID_DEVICE_REQUEST;
break;
}
WdfRequestCompleteWithInformation(Request, status, length);
PSDrv_DbgPrint(3, ("PSDrv_EvtIoDeviceControl - ends\n"));
return;
}
void CUsbIoReader::TerminateThread()
{
// cancel all outstanding io requests
AbortPipe();
}