void DIALOG_DESIGN_RULES::InitGlobalRules()
{
AddUnitSymbol( *m_ViaMinTitle );
AddUnitSymbol( *m_ViaMinDrillTitle );
AddUnitSymbol( *m_MicroViaMinSizeTitle );
AddUnitSymbol( *m_MicroViaMinDrillTitle );
AddUnitSymbol( *m_TrackMinWidthTitle );
PutValueInLocalUnits( *m_SetViasMinSizeCtrl, m_BrdSettings->m_ViasMinSize );
PutValueInLocalUnits( *m_SetViasMinDrillCtrl, m_BrdSettings->m_ViasMinDrill );
if( m_BrdSettings->m_BlindBuriedViaAllowed )
m_OptViaType->SetSelection( 1 );
m_AllowMicroViaCtrl->SetSelection( m_BrdSettings->m_MicroViasAllowed ? 1 : 0 );
PutValueInLocalUnits( *m_SetMicroViasMinSizeCtrl, m_BrdSettings->m_MicroViasMinSize );
PutValueInLocalUnits( *m_SetMicroViasMinDrillCtrl, m_BrdSettings->m_MicroViasMinDrill );
PutValueInLocalUnits( *m_SetTrackMinWidthCtrl, m_BrdSettings->m_TrackMinWidth );
// Initialize Vias and Tracks sizes lists.
// note we display only extra values, never the current netclass value.
// (the first value in history list)
m_TracksWidthList = m_BrdSettings->m_TrackWidthList;
m_TracksWidthList.erase( m_TracksWidthList.begin() ); // remove the netclass value
m_ViasDimensionsList = m_BrdSettings->m_ViasDimensionsList;
m_ViasDimensionsList.erase( m_ViasDimensionsList.begin() ); // remove the netclass value
InitDimensionsLists();
}
void DIALOG_DRC_CONTROL::InitValues()
{
// Connect events and objects
m_ClearanceListBox->Connect( ID_CLEARANCE_LIST, wxEVT_LEFT_DCLICK,
wxMouseEventHandler(
DIALOG_DRC_CONTROL::OnLeftDClickClearance ), NULL, this );
m_ClearanceListBox->Connect( ID_CLEARANCE_LIST, wxEVT_RIGHT_UP,
wxMouseEventHandler(
DIALOG_DRC_CONTROL::OnRightUpClearance ), NULL, this );
m_UnconnectedListBox->Connect( ID_UNCONNECTED_LIST, wxEVT_LEFT_DCLICK,
wxMouseEventHandler( DIALOG_DRC_CONTROL::
OnLeftDClickUnconnected ), NULL, this );
m_UnconnectedListBox->Connect( ID_UNCONNECTED_LIST, wxEVT_RIGHT_UP,
wxMouseEventHandler(
DIALOG_DRC_CONTROL::OnRightUpUnconnected ), NULL, this );
AddUnitSymbol( *m_TrackMinWidthTitle );
AddUnitSymbol( *m_ViaMinTitle );
AddUnitSymbol( *m_MicroViaMinTitle );
m_DeleteCurrentMarkerButton->Enable( false );
Layout(); // adding the units above expanded Clearance text, now resize.
// Set the initial "enabled" status of the browse button and the text
// field for report name
wxCommandEvent junk;
OnReportCheckBoxClicked( junk );
SetFocus();
}
DIALOG_DIMENSION_EDITOR::DIALOG_DIMENSION_EDITOR( PCB_EDIT_FRAME* aParent,
DIMENSION* aDimension, wxDC* aDC ) :
DIALOG_DIMENSION_EDITOR_BASE( aParent )
{
SetFocus();
m_Parent = aParent;
m_DC = aDC;
CurrentDimension = aDimension;
if( aDimension->Text().IsMirrored() )
m_rbMirror->SetSelection( 1 );
else
m_rbMirror->SetSelection( 0 );
m_Name->SetValue( aDimension->Text().GetText() );
// Enter size value in dialog
PutValueInLocalUnits( *m_TxtSizeXCtrl, aDimension->Text().GetSize().x );
AddUnitSymbol( *m_staticTextSizeX );
PutValueInLocalUnits( *m_TxtSizeYCtrl, aDimension->Text().GetSize().y );
AddUnitSymbol( *m_staticTextSizeY );
// Enter lines thickness value in dialog
PutValueInLocalUnits( *m_TxtWidthCtrl, aDimension->GetWidth() );
AddUnitSymbol( *m_staticTextWidth );
// Enter position value in dialog
PutValueInLocalUnits( *m_textCtrlPosX, aDimension->Text().GetTextPosition().x );
AddUnitSymbol( *m_staticTextPosX );
PutValueInLocalUnits( *m_textCtrlPosY, aDimension->Text().GetTextPosition().y );
AddUnitSymbol( *m_staticTextPosY );
// Configure the layers list selector
if( !m_Parent->GetBoard()->IsLayerEnabled( aDimension->GetLayer() ) )
// Should not happens, because one cannot select a board item on a
// not activated layer, but ...
m_SelLayerBox->ShowNonActivatedLayers( true );
m_SelLayerBox->SetLayersHotkeys( false );
m_SelLayerBox->SetLayerSet( LSET::AllCuMask().set( Edge_Cuts ) );
m_SelLayerBox->SetBoardFrame( m_Parent );
m_SelLayerBox->Resync();
if( m_SelLayerBox->SetLayerSelection( aDimension->GetLayer() ) < 0 )
{
wxMessageBox( _( "This item has an illegal layer id.\n"
"Now, forced on the drawings layer. Please, fix it" ) );
m_SelLayerBox->SetLayerSelection( Dwgs_User );
}
SetDefaultItem( m_sdbSizerBtsOK );
GetSizer()->Fit( this );
GetSizer()->SetSizeHints( this );
Centre();
}
DIALOG_DIMENSION_EDITOR::DIALOG_DIMENSION_EDITOR( PCB_EDIT_FRAME* aParent,
DIMENSION* aDimension, wxDC* aDC ) :
DIALOG_DIMENSION_EDITOR_BASE( aParent )
{
SetFocus();
m_Parent = aParent;
m_DC = aDC;
CurrentDimension = aDimension;
if( aDimension->Text().IsMirrored() )
m_rbMirror->SetSelection( 1 );
else
m_rbMirror->SetSelection( 0 );
m_Name->SetValue( aDimension->Text().GetText() );
// Enter size value in dialog
PutValueInLocalUnits( *m_TxtSizeXCtrl, aDimension->Text().GetSize().x );
AddUnitSymbol( *m_staticTextSizeX );
PutValueInLocalUnits( *m_TxtSizeYCtrl, aDimension->Text().GetSize().y );
AddUnitSymbol( *m_staticTextSizeY );
// Enter lines thickness value in dialog
PutValueInLocalUnits( *m_TxtWidthCtrl, aDimension->GetWidth() );
AddUnitSymbol( *m_staticTextWidth );
// Enter position value in dialog
PutValueInLocalUnits( *m_textCtrlPosX, aDimension->Text().GetTextPosition().x );
AddUnitSymbol( *m_staticTextPosX );
PutValueInLocalUnits( *m_textCtrlPosY, aDimension->Text().GetTextPosition().y );
AddUnitSymbol( *m_staticTextPosY );
// Configure the layers list selector
m_SelLayerBox->SetLayersHotkeys( false );
m_SelLayerBox->SetLayerMask( ALL_CU_LAYERS | EDGE_LAYER );
m_SelLayerBox->SetBoardFrame( m_Parent );
m_SelLayerBox->Resync();
if( m_SelLayerBox->SetLayerSelection( aDimension->GetLayer() ) < 0 )
{
wxMessageBox( _("This item has an illegal layer id.\n"
"Now, forced on the drawings layer. Please, fix it") );
m_SelLayerBox->SetLayerSelection( DRAW_N );
}
GetSizer()->Fit( this );
GetSizer()->SetSizeHints( this );
Centre();
}
void DIALOG_NON_COPPER_ZONES_EDITOR::Init()
{
BOARD* board = m_parent->GetBoard();
SetReturnCode( ZONE_ABORT ); // Will be changed on button click
AddUnitSymbol( *m_MinThicknessValueTitle, g_UserUnit );
wxString msg = StringFromValue( g_UserUnit, m_settings.m_ZoneMinThickness );
m_ZoneMinThicknessCtrl->SetValue( msg );
if( m_settings.m_Zone_45_Only )
m_OrientEdgesOpt->SetSelection( 1 );
switch( m_settings.m_Zone_HatchingStyle )
{
case CPolyLine::NO_HATCH:
m_OutlineAppearanceCtrl->SetSelection( 0 );
break;
case CPolyLine::DIAGONAL_EDGE:
m_OutlineAppearanceCtrl->SetSelection( 1 );
break;
case CPolyLine::DIAGONAL_FULL:
m_OutlineAppearanceCtrl->SetSelection( 2 );
break;
}
// Create one column in m_LayerSelectionCtrl
wxListItem column0;
column0.SetId( 0 );
m_LayerSelectionCtrl->InsertColumn( 0, column0 );
// Create an icon list:
wxImageList* imageList = new wxImageList( LAYER_BITMAP_SIZE_X, LAYER_BITMAP_SIZE_Y );
m_LayerSelectionCtrl->AssignImageList( imageList, wxIMAGE_LIST_SMALL );
int ii = 0;
int lyrSelect = ( (PCB_SCREEN*) m_parent->GetScreen() )->m_Active_Layer;
if( m_zone )
lyrSelect = m_zone->GetLayer();
for( LSEQ seq = LSET::AllNonCuMask().Seq(); seq; ++seq, ++ii )
{
LAYER_ID layer = *seq;
EDA_COLOR_T layerColor = board->GetLayerColor( layer );
imageList->Add( makeLayerBitmap( layerColor ) );
wxString msg = board->GetLayerName( layer );
msg.Trim();
int itemIndex = m_LayerSelectionCtrl->InsertItem(
m_LayerSelectionCtrl->GetItemCount(), msg, ii );
if(lyrSelect == layer )
m_LayerSelectionCtrl->Select( itemIndex );
}
}
void WinEDA_TextModPropertiesFrame::SetDisplayValue(void)
/********************************************************/
{
wxString msg;
if ( m_Module )
{
wxString format = m_ModuleInfoText->GetLabel();
msg.Printf( format,
m_Module->m_Reference->m_Text.GetData(),
m_Module->m_Value->m_Text.GetData(),
(float)(m_Module->m_Orient/10) );
m_ModuleInfoText->SetLabel(msg);
}
if(m_CurrentTextMod->m_Type == TEXT_is_VALUE) m_TextDataTitle->SetLabel(_("Value:"));
else if(m_CurrentTextMod->m_Type == TEXT_is_DIVERS) m_TextDataTitle->SetLabel(_("Text:"));
else if(m_CurrentTextMod->m_Type != TEXT_is_REFERENCE) m_TextDataTitle->SetLabel(wxT("???"));
m_Name->SetValue(m_CurrentTextMod->m_Text);
AddUnitSymbol(*m_SizeXTitle);
PutValueInLocalUnits(*m_TxtSizeCtrlX, m_CurrentTextMod->m_Size.x,
m_Parent->m_InternalUnits);
AddUnitSymbol(*m_SizeYTitle);
PutValueInLocalUnits(*m_TxtSizeCtrlY, m_CurrentTextMod->m_Size.y,
m_Parent->m_InternalUnits);
AddUnitSymbol(*m_PosXTitle);
PutValueInLocalUnits(*m_TxtPosCtrlX, m_CurrentTextMod->m_Pos0.x,
m_Parent->m_InternalUnits);
AddUnitSymbol(*m_PosYTitle);
PutValueInLocalUnits(*m_TxtPosCtrlY, m_CurrentTextMod->m_Pos0.y,
m_Parent->m_InternalUnits);
AddUnitSymbol(*m_WidthTitle);
PutValueInLocalUnits(*m_TxtWidthCtlr, m_CurrentTextMod->m_Width,
m_Parent->m_InternalUnits);
if ( (m_CurrentTextMod->m_Orient != 0) && (m_CurrentTextMod->m_Orient != 1800) &&
(m_CurrentTextMod->m_Orient != -1800) )
m_Orient->SetSelection(1);;
if ( m_CurrentTextMod->m_NoShow ) m_Show->SetSelection(1);;
}
void UnitType::InitSymbol(vector< UeStdString > &array)
{
vector<UeStdString>::const_iterator ItBegin = array.begin();
for ( ;ItBegin != array.end();ItBegin++ )
{
AddUnitSymbol(ItBegin->c_str());
}
}
WinEDA_SheetPropertiesFrame::WinEDA_SheetPropertiesFrame( WinEDA_SchematicFrame* parent,
DrawSheetStruct * currentsheet,
wxWindowID id, const wxString& caption,
const wxPoint& pos, const wxSize& size, long style )
{
m_Parent = parent;
m_CurrentSheet = currentsheet;
Create(parent, id, caption, pos, size, style);
AddUnitSymbol(*m_SheetNameTextSize);
PutValueInLocalUnits(*m_SheetNameSize,m_CurrentSheet->m_Field[VALUE].m_Size.x,
m_Parent->m_InternalUnits);
AddUnitSymbol(*m_FileNameTextSize);
PutValueInLocalUnits(*m_FileNameSize,
m_CurrentSheet->m_Field[SHEET_FILENAME].m_Size.x,
m_Parent->m_InternalUnits);
}
void DIALOG_COPPER_ZONE::OnCornerSmoothingModeChoice( wxCommandEvent& event )
{
int selection = m_cornerSmoothingChoice->GetSelection();
switch( selection )
{
case ZONE_SETTINGS::SMOOTHING_NONE:
m_cornerSmoothingTitle->Enable( false );
m_cornerSmoothingCtrl->Enable( false );
break;
case ZONE_SETTINGS::SMOOTHING_CHAMFER:
m_cornerSmoothingTitle->Enable( true );
m_cornerSmoothingCtrl->Enable( true );
m_cornerSmoothingTitle->SetLabel( _( "Chamfer distance" ) );
AddUnitSymbol( *m_cornerSmoothingTitle, g_UserUnit );
break;
case ZONE_SETTINGS::SMOOTHING_FILLET:
m_cornerSmoothingTitle->Enable( true );
m_cornerSmoothingCtrl->Enable( true );
m_cornerSmoothingTitle->SetLabel( _( "Fillet radius" ) );
AddUnitSymbol( *m_cornerSmoothingTitle, g_UserUnit );
break;
}
}
void DialogEditModuleText::initDlg( )
{
SetFocus();
wxString msg;
if( m_module )
{
wxString format = m_ModuleInfoText->GetLabel();
msg.Printf( format,
GetChars( m_module->GetReference() ),
GetChars( m_module->GetValue() ),
m_module->GetOrientation() / 10.0 );
}
else
{
msg.Empty();
}
m_ModuleInfoText->SetLabel( msg );
switch( m_currentText->GetType() )
{
case TEXTE_MODULE::TEXT_is_VALUE:
m_TextDataTitle->SetLabel( _( "Value:" ) );
break;
case TEXTE_MODULE::TEXT_is_DIVERS:
m_TextDataTitle->SetLabel( _( "Text:" ) );
break;
default:
m_TextDataTitle->SetLabel( _( "Reference:" ) );
break;
}
m_Name->SetValue( m_currentText->GetText() );
m_Style->SetSelection( m_currentText->IsItalic() ? 1 : 0 );
AddUnitSymbol( *m_SizeXTitle );
PutValueInLocalUnits( *m_TxtSizeCtrlX, m_currentText->GetSize().x );
AddUnitSymbol( *m_SizeYTitle );
PutValueInLocalUnits( *m_TxtSizeCtrlY, m_currentText->GetSize().y );
AddUnitSymbol( *m_PosXTitle );
PutValueInLocalUnits( *m_TxtPosCtrlX, m_currentText->GetPos0().x );
AddUnitSymbol( *m_PosYTitle );
PutValueInLocalUnits( *m_TxtPosCtrlY, m_currentText->GetPos0().y );
AddUnitSymbol( *m_WidthTitle );
PutValueInLocalUnits( *m_TxtWidthCtlr, m_currentText->GetThickness() );
double text_orient = m_currentText->GetOrientation();
NORMALIZE_ANGLE_90( text_orient );
if( (text_orient != 0) )
m_Orient->SetSelection( 1 );
if( !m_currentText->IsVisible() )
m_Show->SetSelection( 1 );;
}
void DIALOG_COPPER_ZONE::initDialog()
{
BOARD* board = m_Parent->GetBoard();
wxString msg;
if( m_settings.m_Zone_45_Only )
m_OrientEdgesOpt->SetSelection( 1 );
m_FillModeCtrl->SetSelection( m_settings.m_FillMode ? 1 : 0 );
AddUnitSymbol( *m_ClearanceValueTitle, g_UserUnit );
msg = ReturnStringFromValue( g_UserUnit, m_settings.m_ZoneClearance );
m_ZoneClearanceCtrl->SetValue( msg );
AddUnitSymbol( *m_MinThicknessValueTitle, g_UserUnit );
msg = ReturnStringFromValue( g_UserUnit, m_settings.m_ZoneMinThickness );
m_ZoneMinThicknessCtrl->SetValue( msg );
switch( m_settings.GetPadConnection() )
{
case THT_THERMAL: // Thermals only for THT pads
m_PadInZoneOpt->SetSelection( 2 );
break;
case PAD_NOT_IN_ZONE: // Pads are not covered
m_PadInZoneOpt->SetSelection( 3 );
break;
default:
case THERMAL_PAD: // Use thermal relief for pads
m_PadInZoneOpt->SetSelection( 1 );
break;
case PAD_IN_ZONE: // pads are covered by copper
m_PadInZoneOpt->SetSelection( 0 );
break;
}
// Antipad and spokes are significant only for thermals
if( m_settings.GetPadConnection() != THERMAL_PAD &&
m_settings.GetPadConnection() != THT_THERMAL )
{
m_AntipadSizeValue->Enable( false );
m_CopperWidthValue->Enable( false );
}
else
{
m_AntipadSizeValue->Enable( true );
m_CopperWidthValue->Enable( true );
}
m_PriorityLevelCtrl->SetValue( m_settings.m_ZonePriority );
AddUnitSymbol( *m_AntipadSizeText, g_UserUnit );
AddUnitSymbol( *m_CopperBridgeWidthText, g_UserUnit );
PutValueInLocalUnits( *m_AntipadSizeValue, m_settings.m_ThermalReliefGap );
PutValueInLocalUnits( *m_CopperWidthValue, m_settings.m_ThermalReliefCopperBridge );
m_cornerSmoothingChoice->SetSelection( m_settings.GetCornerSmoothingType() );
PutValueInLocalUnits( *m_cornerSmoothingCtrl, m_settings.GetCornerRadius() );
switch( m_settings.m_Zone_HatchingStyle )
{
case CPolyLine::NO_HATCH:
m_OutlineAppearanceCtrl->SetSelection( 0 );
break;
case CPolyLine::DIAGONAL_EDGE:
m_OutlineAppearanceCtrl->SetSelection( 1 );
break;
case CPolyLine::DIAGONAL_FULL:
m_OutlineAppearanceCtrl->SetSelection( 2 );
break;
}
m_ArcApproximationOpt->SetSelection(
m_settings.m_ArcToSegmentsCount == ARC_APPROX_SEGMENTS_COUNT_HIGHT_DEF ? 1 : 0 );
// Create one column in m_LayerSelectionCtrl
wxListItem column0;
column0.SetId( 0 );
m_LayerSelectionCtrl->InsertColumn( 0, column0 );
// Build copper layer list and append to layer widget
int layerCount = board->GetCopperLayerCount();
wxImageList* imageList = new wxImageList( LAYER_BITMAP_SIZE_X, LAYER_BITMAP_SIZE_Y );
m_LayerSelectionCtrl->AssignImageList( imageList, wxIMAGE_LIST_SMALL );
int ctrlWidth = 0; // Min width for m_LayerSelectionCtrl to show the layers names
for( LAYER_NUM ii = FIRST_LAYER; ii < layerCount; ++ii )
{
LAYER_NUM layerNumber = LAYER_N_BACK;
if( layerCount <= 1 || ii < layerCount - 1 )
layerNumber = ii;
else if( ii == layerCount - 1 )
layerNumber = LAYER_N_FRONT;
m_LayerId.insert( m_LayerId.begin(), layerNumber );
msg = board->GetLayerName( layerNumber ).Trim();
EDA_COLOR_T layerColor = board->GetLayerColor( layerNumber );
imageList->Add( makeLayerBitmap( layerColor ) );
int itemIndex = m_LayerSelectionCtrl->InsertItem( 0, msg, ii );
if( m_settings.m_CurrentZone_Layer == layerNumber )
m_LayerSelectionCtrl->Select( itemIndex );
wxSize tsize( GetTextSize( msg, m_LayerSelectionCtrl ) );
ctrlWidth = std::max( ctrlWidth, tsize.x );
}
// The most easy way to ensure the right size is to use wxLIST_AUTOSIZE
// unfortunately this option does not work well both on
// wxWidgets 2.8 ( column witdth too small), and
// wxWidgets 2.9 ( column witdth too large)
ctrlWidth += LAYER_BITMAP_SIZE_X + 16; // Add bitmap width + margin between bitmap and text
m_LayerSelectionCtrl->SetColumnWidth( 0, ctrlWidth );
ctrlWidth += 4; // add small margin between text and window borders
m_LayerSelectionCtrl->SetMinSize( wxSize(ctrlWidth, -1));
wxString netNameDoNotShowFilter = wxT( "Net-*" );
if( m_Config )
{
int opt = m_Config->Read( ZONE_NET_SORT_OPTION_KEY, 1l );
m_NetDisplayOption->SetSelection( opt );
m_Config->Read( ZONE_NET_FILTER_STRING_KEY, netNameDoNotShowFilter );
}
else
m_NetDisplayOption->SetSelection( 1 );
m_ShowNetNameFilter->SetValue( m_netNameShowFilter );
initListNetsParams();
// Build list of nets:
m_DoNotShowNetNameFilter->SetValue( netNameDoNotShowFilter );
buildAvailableListOfNets();
wxCommandEvent event;
OnCornerSmoothingModeChoice( event );
}
void DIALOG_SVG_PRINT::initDialog()
{
m_board = m_parent->GetBoard();
if( m_config )
{
m_config->Read( PLOTSVGMODECOLOR_KEY, &m_printBW, false );
long ltmp;
m_config->Read( PLOTSVGPAGESIZEOPT_KEY, <mp, 0 );
m_rbSvgPageSizeOpt->SetSelection( ltmp );
m_config->Read( PLOTSVGPLOT_BRD_EDGE_KEY, <mp, 1 );
m_PrintBoardEdgesCtrl->SetValue( ltmp );
}
m_outputDirectory = m_parent->GetPlotSettings().GetOutputDirectory();
m_outputDirectoryName->SetValue( m_outputDirectory );
if( m_printBW )
m_ModeColorOption->SetSelection( 1 );
else
m_ModeColorOption->SetSelection( 0 );
m_printMirrorOpt->SetValue( m_printMirror );
m_rbFileOpt->SetSelection( m_oneFileOnly ? 1 : 0 );
AddUnitSymbol( *m_TextPenWidth, g_UserUnit );
m_DialogDefaultPenSize->SetValue(
ReturnStringFromValue( g_UserUnit, g_DrawDefaultLineThickness ) );
// Create layers list
LAYER_NUM layer;
for( layer = FIRST_LAYER; layer < NB_PCB_LAYERS; ++layer )
{
if( !m_board->IsLayerEnabled( layer ) )
m_boxSelectLayer[layer] = NULL;
else
m_boxSelectLayer[layer] =
new wxCheckBox( this, -1, m_board->GetLayerName( layer ) );
}
// Add wxCheckBoxes in layers lists dialog
// List layers in same order than in setup layers dialog
// (Front or Top to Back or Bottom)
DECLARE_LAYERS_ORDER_LIST( layersOrder );
for( LAYER_NUM layer_idx = FIRST_LAYER; layer_idx < NB_PCB_LAYERS; ++layer_idx )
{
layer = layersOrder[layer_idx];
wxASSERT( layer < NB_PCB_LAYERS );
if( m_boxSelectLayer[layer] == NULL )
continue;
LAYER_MSK mask = GetLayerMask( layer );
if( mask & s_SelectedLayers )
m_boxSelectLayer[layer]->SetValue( true );
if( layer <= LAST_COPPER_LAYER )
m_CopperLayersBoxSizer->Add( m_boxSelectLayer[layer],
0,
wxGROW | wxALL,
1 );
else
m_TechnicalBoxSizer->Add( m_boxSelectLayer[layer],
0,
wxGROW | wxALL,
1 );
}
if( m_config )
{
wxString layerKey;
for( LAYER_NUM layer = FIRST_LAYER; layer < NB_PCB_LAYERS; ++layer )
{
bool option;
if( m_boxSelectLayer[layer] == NULL )
continue;
layerKey.Printf( OPTKEY_LAYERBASE, layer );
if( m_config->Read( layerKey, &option ) )
m_boxSelectLayer[layer]->SetValue( option );
}
}
}
void DIALOG_PRINT_USING_PRINTER::initValues( )
{
wxString msg;
BOARD* board = m_parent->GetBoard();
s_Parameters.m_PageSetupData = s_pageSetupData;
// Create layer list.
wxString layerKey;
LSEQ seq = board->GetEnabledLayers().UIOrder();
for( ; seq; ++seq )
{
LAYER_ID layer = *seq;
m_BoxSelectLayer[layer] = new wxCheckBox( this, -1, board->GetLayerName( layer ) );
if( IsCopperLayer( layer ) )
m_CopperLayersBoxSizer->Add( m_BoxSelectLayer[layer],
0, wxGROW | wxALL, 1 );
else
m_TechnicalLayersBoxSizer->Add( m_BoxSelectLayer[layer],
0, wxGROW | wxALL, 1 );
layerKey.Printf( OPTKEY_LAYERBASE, layer );
bool option;
if( m_config->Read( layerKey, &option ) )
m_BoxSelectLayer[layer]->SetValue( option );
else
{
if( s_SelectedLayers[layer] )
m_BoxSelectLayer[layer]->SetValue( true );
}
}
// Option for excluding contents of "Edges Pcb" layer
m_Exclude_Edges_Pcb->Show( true );
// Read the scale adjust option
int scale_idx = 4; // default selected scale = ScaleList[4] = 1.000
if( m_config )
{
m_config->Read( OPTKEY_PRINT_X_FINESCALE_ADJ, &s_Parameters.m_XScaleAdjust );
m_config->Read( OPTKEY_PRINT_Y_FINESCALE_ADJ, &s_Parameters.m_YScaleAdjust );
m_config->Read( OPTKEY_PRINT_SCALE, &scale_idx );
m_config->Read( OPTKEY_PRINT_PAGE_FRAME, &s_Parameters.m_Print_Sheet_Ref, 1);
m_config->Read( OPTKEY_PRINT_MONOCHROME_MODE, &s_Parameters.m_Print_Black_and_White, 1);
m_config->Read( OPTKEY_PRINT_PAGE_PER_LAYER, &s_Parameters.m_OptionPrintPage, 0);
int tmp;
m_config->Read( OPTKEY_PRINT_PADS_DRILL, &tmp, PRINT_PARAMETERS::SMALL_DRILL_SHAPE );
s_Parameters.m_DrillShapeOpt = (PRINT_PARAMETERS::DrillShapeOptT) tmp;
// Test for a reasonnable scale value. Set to 1 if problem
if( s_Parameters.m_XScaleAdjust < MIN_SCALE ||
s_Parameters.m_YScaleAdjust < MIN_SCALE ||
s_Parameters.m_XScaleAdjust > MAX_SCALE ||
s_Parameters.m_YScaleAdjust > MAX_SCALE )
s_Parameters.m_XScaleAdjust = s_Parameters.m_YScaleAdjust = 1.0;
s_SelectedLayers = LSET();
for( seq.Rewind(); seq; ++seq )
{
LAYER_ID layer = *seq;
wxString layerKey;
bool option;
layerKey.Printf( OPTKEY_LAYERBASE, layer );
option = false;
if( m_config->Read( layerKey, &option ) )
{
m_BoxSelectLayer[layer]->SetValue( option );
if( option )
s_SelectedLayers.set( layer );
}
}
}
m_ScaleOption->SetSelection( scale_idx );
scale_idx = m_ScaleOption->GetSelection();
s_Parameters.m_PrintScale = s_ScaleList[scale_idx];
m_Print_Mirror->SetValue(s_Parameters.m_PrintMirror);
m_Exclude_Edges_Pcb->SetValue(m_ExcludeEdgeLayer);
m_Print_Sheet_Ref->SetValue( s_Parameters.m_Print_Sheet_Ref );
// Options to plot pads and vias holes
m_Drill_Shape_Opt->SetSelection( s_Parameters.m_DrillShapeOpt );
if( s_Parameters.m_Print_Black_and_White )
m_ModeColorOption->SetSelection( 1 );
else
m_ModeColorOption->SetSelection( 0 );
m_PagesOption->SetSelection(s_Parameters.m_OptionPrintPage);
s_Parameters.m_PenDefaultSize = g_DrawDefaultLineThickness;
AddUnitSymbol( *m_TextPenWidth, g_UserUnit );
m_DialogPenWidth->SetValue(
StringFromValue( g_UserUnit, s_Parameters.m_PenDefaultSize ) );
// Create scale adjust option
msg.Printf( wxT( "%f" ), s_Parameters.m_XScaleAdjust );
m_FineAdjustXscaleOpt->SetValue( msg );
msg.Printf( wxT( "%f" ), s_Parameters.m_YScaleAdjust );
m_FineAdjustYscaleOpt->SetValue( msg );
bool enable = (s_Parameters.m_PrintScale == 1.0);
m_FineAdjustXscaleOpt->Enable(enable);
m_FineAdjustYscaleOpt->Enable(enable);
}
// Initialize the dialog options:
void DIALOG_PLOT_SCHEMATIC::initDlg()
{
SetFocus(); // make the ESC work
// Set paper size option
m_PaperSizeOption->SetSelection( m_pageSizeSelect );
// Set color or B&W plot option
bool tmp;
m_config->Read( PLOT_MODECOLOR_KEY, &tmp, true );
setModeColor( tmp );
// Set plot or not frame reference option
m_config->Read( PLOT_FRAME_REFERENCE_KEY, &tmp, true );
setPlotFrameRef( tmp );
// Set HPGL plot origin to center of paper of left bottom corner
m_config->Read( PLOT_HPGL_ORIGIN_KEY, &tmp, false );
SetPlotOriginCenter( tmp );
m_config->Read( PLOT_HPGL_PAPERSIZE_KEY, &m_HPGLPaperSizeSelect, 0 );
m_HPGLPaperSizeOption->SetSelection( m_HPGLPaperSizeSelect );
// HPGL Pen Size is stored in mm in config
m_config->Read( PLOT_HPGL_PEN_SIZE_KEY, &m_HPGLPenSize, 0.5 );
m_HPGLPenSize *= IU_PER_MM;
// Switch to the last save plot format
long plotfmt;
m_config->Read( PLOT_FORMAT_KEY, &plotfmt, 0 );
switch( plotfmt )
{
default:
case PLOT_FORMAT_POST:
m_plotFormatOpt->SetSelection( 0 );
break;
case PLOT_FORMAT_PDF:
m_plotFormatOpt->SetSelection( 1 );
break;
case PLOT_FORMAT_SVG:
m_plotFormatOpt->SetSelection( 2 );
break;
case PLOT_FORMAT_DXF:
m_plotFormatOpt->SetSelection( 3 );
break;
case PLOT_FORMAT_HPGL:
m_plotFormatOpt->SetSelection( 4 );
break;
}
// Set the default line width (pen width which should be used for
// items that do not have a pen size defined (like frame ref)
AddUnitSymbol( *m_defaultLineWidthTitle, g_UserUnit );
PutValueInLocalUnits( *m_DefaultLineSizeCtrl, GetDefaultLineThickness() );
// Initialize HPGL specific widgets
AddUnitSymbol( *m_penHPLGWidthTitle, g_UserUnit );
PutValueInLocalUnits( *m_penHPGLWidthCtrl, m_HPGLPenSize );
m_HPGLPaperSizeOption->SetSelection( m_HPGLPaperSizeSelect );
// Hide/show widgets that are not always displayed:
wxCommandEvent cmd_event;
OnPlotFormatSelection( cmd_event );
}
void DIALOG_PLOT::init_Dialog()
{
wxString msg;
wxFileName fileName;
m_config->Read( OPTKEY_PLOT_X_FINESCALE_ADJ, &m_XScaleAdjust );
m_config->Read( OPTKEY_PLOT_Y_FINESCALE_ADJ, &m_YScaleAdjust );
// m_PSWidthAdjust is stored in mm in user config
double dtmp;
m_config->Read( CONFIG_PS_FINEWIDTH_ADJ, &dtmp, 0 );
m_PSWidthAdjust = KiROUND( dtmp * IU_PER_MM );
// The reasonable width correction value must be in a range of
// [-(MinTrackWidth-1), +(MinClearanceValue-1)] decimils.
m_widthAdjustMinValue = -( m_board->GetDesignSettings().m_TrackMinWidth - 1 );
m_widthAdjustMaxValue = m_board->GetDesignSettings().GetSmallestClearanceValue() - 1;
switch( m_plotOpts.GetFormat() )
{
default:
case PLOT_FORMAT_GERBER:
m_plotFormatOpt->SetSelection( 0 );
break;
case PLOT_FORMAT_POST:
m_plotFormatOpt->SetSelection( 1 );
break;
case PLOT_FORMAT_SVG:
m_plotFormatOpt->SetSelection( 2 );
break;
case PLOT_FORMAT_DXF:
m_plotFormatOpt->SetSelection( 3 );
break;
case PLOT_FORMAT_HPGL:
m_plotFormatOpt->SetSelection( 4 );
break;
case PLOT_FORMAT_PDF:
m_plotFormatOpt->SetSelection( 5 );
break;
}
msg = StringFromValue( g_UserUnit, m_board->GetDesignSettings().m_SolderMaskMargin, true );
m_SolderMaskMarginCurrValue->SetLabel( msg );
msg = StringFromValue( g_UserUnit, m_board->GetDesignSettings().m_SolderMaskMinWidth, true );
m_SolderMaskMinWidthCurrValue->SetLabel( msg );
// Set units and value for HPGL pen size (this param in in mils).
AddUnitSymbol( *m_textPenSize, g_UserUnit );
msg = StringFromValue( g_UserUnit,
m_plotOpts.GetHPGLPenDiameter() * IU_PER_MILS );
m_HPGLPenSizeOpt->AppendText( msg );
AddUnitSymbol( *m_textDefaultPenSize, g_UserUnit );
msg = StringFromValue( g_UserUnit, m_plotOpts.GetLineWidth() );
m_linesWidth->AppendText( msg );
// Set units for PS global width correction.
AddUnitSymbol( *m_textPSFineAdjustWidth, g_UserUnit );
// Test for a reasonable scale value. Set to 1 if problem
if( m_XScaleAdjust < PLOT_MIN_SCALE || m_YScaleAdjust < PLOT_MIN_SCALE
|| m_XScaleAdjust > PLOT_MAX_SCALE || m_YScaleAdjust > PLOT_MAX_SCALE )
m_XScaleAdjust = m_YScaleAdjust = 1.0;
msg.Printf( wxT( "%f" ), m_XScaleAdjust );
m_fineAdjustXscaleOpt->AppendText( msg );
msg.Printf( wxT( "%f" ), m_YScaleAdjust );
m_fineAdjustYscaleOpt->AppendText( msg );
// Test for a reasonable PS width correction value. Set to 0 if problem.
if( m_PSWidthAdjust < m_widthAdjustMinValue || m_PSWidthAdjust > m_widthAdjustMaxValue )
m_PSWidthAdjust = 0.;
msg.Printf( wxT( "%f" ), To_User_Unit( g_UserUnit, m_PSWidthAdjust ) );
m_PSFineAdjustWidthOpt->AppendText( msg );
m_plotPSNegativeOpt->SetValue( m_plotOpts.GetNegative() );
m_forcePSA4OutputOpt->SetValue( m_plotOpts.GetA4Output() );
// Could devote a PlotOrder() function in place of UIOrder().
m_layerList = m_board->GetEnabledLayers().UIOrder();
// Populate the check list box by all enabled layers names
for( LSEQ seq = m_layerList; seq; ++seq )
{
PCB_LAYER_ID layer = *seq;
int checkIndex = m_layerCheckListBox->Append( m_board->GetLayerName( layer ) );
if( m_plotOpts.GetLayerSelection()[layer] )
m_layerCheckListBox->Check( checkIndex );
}
// Option for using proper Gerber extensions
m_useGerberExtensions->SetValue( m_plotOpts.GetUseGerberProtelExtensions() );
// Option for including Gerber attributes (from Gerber X2 format) in the output
m_useGerberX2Attributes->SetValue( m_plotOpts.GetUseGerberAttributes() );
// Option for including Gerber netlist info (from Gerber X2 format) in the output
m_useGerberNetAttributes->SetValue( m_plotOpts.GetIncludeGerberNetlistInfo() );
// Grey out if m_useGerberX2Attributes is not checked
m_useGerberNetAttributes->Enable( m_useGerberX2Attributes->GetValue() );
// Option to generate a Gerber job file
m_generateGerberJobFile->SetValue( m_plotOpts.GetCreateGerberJobFile() );
// Gerber precision for coordinates
m_rbGerberFormat->SetSelection( m_plotOpts.GetGerberPrecision() == 5 ? 0 : 1 );
// Option for excluding contents of "Edges Pcb" layer
m_excludeEdgeLayerOpt->SetValue( m_plotOpts.GetExcludeEdgeLayer() );
m_subtractMaskFromSilk->SetValue( m_plotOpts.GetSubtractMaskFromSilk() );
// Option to plot page references:
m_plotSheetRef->SetValue( m_plotOpts.GetPlotFrameRef() );
// Option to allow pads on silkscreen layers
m_plotPads_on_Silkscreen->SetValue( m_plotOpts.GetPlotPadsOnSilkLayer() );
// Options to plot texts on footprints
m_plotModuleValueOpt->SetValue( m_plotOpts.GetPlotValue() );
m_plotModuleRefOpt->SetValue( m_plotOpts.GetPlotReference() );
m_plotInvisibleText->SetValue( m_plotOpts.GetPlotInvisibleText() );
// Options to plot pads and vias holes
m_drillShapeOpt->SetSelection( m_plotOpts.GetDrillMarksType() );
// Scale option
m_scaleOpt->SetSelection( m_plotOpts.GetScaleSelection() );
// Plot mode
setPlotModeChoiceSelection( m_plotOpts.GetPlotMode() );
// Plot outline mode
m_DXF_plotModeOpt->SetValue( m_plotOpts.GetDXFPlotPolygonMode() );
// Plot text mode
m_DXF_plotTextStrokeFontOpt->SetValue( m_plotOpts.GetTextMode() == PLOTTEXTMODE_DEFAULT );
// Plot mirror option
m_plotMirrorOpt->SetValue( m_plotOpts.GetMirror() );
// Put vias on mask layer
m_plotNoViaOnMaskOpt->SetValue( m_plotOpts.GetPlotViaOnMaskLayer() );
// Initialize a few other parameters, which can also be modified
// from the drill dialog
reInitDialog();
// Update options values:
wxCommandEvent cmd_event;
SetPlotFormat( cmd_event );
OnSetScaleOpt( cmd_event );
}
void WinEDA_DrcFrame::CreateControls()
{
SetFont(*g_DialogFont);
////@begin WinEDA_DrcFrame content construction
// Generated by DialogBlocks, 27/02/2006 21:15:33 (unregistered)
WinEDA_DrcFrame* itemDialog1 = this;
m_MainSizer = new wxBoxSizer(wxVERTICAL);
itemDialog1->SetSizer(m_MainSizer);
m_CommandSizer = new wxBoxSizer(wxHORIZONTAL);
m_MainSizer->Add(m_CommandSizer, 0, wxALIGN_CENTER_HORIZONTAL|wxALL, 5);
wxBoxSizer* itemBoxSizer4 = new wxBoxSizer(wxVERTICAL);
m_CommandSizer->Add(itemBoxSizer4, 0, wxGROW|wxALL, 5);
m_ClearenceTitle = new wxStaticText( itemDialog1, wxID_STATIC, _("Clearance"), wxDefaultPosition, wxDefaultSize, 0 );
itemBoxSizer4->Add(m_ClearenceTitle, 0, wxGROW|wxLEFT|wxRIGHT|wxTOP|wxADJUST_MINSIZE, 5);
m_SetClearance = new wxTextCtrl( itemDialog1, ID_TEXTCTRL1, _T(""), wxDefaultPosition, wxDefaultSize, 0 );
itemBoxSizer4->Add(m_SetClearance, 0, wxGROW|wxLEFT|wxRIGHT|wxBOTTOM, 5);
wxBoxSizer* itemBoxSizer7 = new wxBoxSizer(wxHORIZONTAL);
m_CommandSizer->Add(itemBoxSizer7, 0, wxALIGN_CENTER_VERTICAL|wxALL, 5);
wxBoxSizer* itemBoxSizer8 = new wxBoxSizer(wxVERTICAL);
itemBoxSizer7->Add(itemBoxSizer8, 0, wxGROW|wxALL, 5);
wxButton* itemButton9 = new wxButton( itemDialog1, ID_DRC_RUN, _("Test Drc"), wxDefaultPosition, wxDefaultSize, 0 );
itemButton9->SetForegroundColour(wxColour(202, 0, 0));
itemBoxSizer8->Add(itemButton9, 0, wxGROW|wxALL, 5);
wxButton* itemButton10 = new wxButton( itemDialog1, ID_STOP_CONTROL_DRC, _("Stop Drc"), wxDefaultPosition, wxDefaultSize, 0 );
itemButton10->SetForegroundColour(wxColour(0, 128, 128));
itemBoxSizer8->Add(itemButton10, 0, wxGROW|wxALL, 5);
wxBoxSizer* itemBoxSizer11 = new wxBoxSizer(wxVERTICAL);
itemBoxSizer7->Add(itemBoxSizer11, 0, wxGROW|wxALL, 5);
wxButton* itemButton12 = new wxButton( itemDialog1, ID_ERASE_DRC_MARKERS, _("Del Markers"), wxDefaultPosition, wxDefaultSize, 0 );
itemButton12->SetForegroundColour(wxColour(0, 128, 0));
itemBoxSizer11->Add(itemButton12, 0, wxGROW|wxALL, 5);
wxButton* itemButton13 = new wxButton( itemDialog1, ID_LIST_UNCONNECTED_PADS, _("List Unconn"), wxDefaultPosition, wxDefaultSize, 0 );
itemButton13->SetForegroundColour(wxColour(0, 0, 255));
itemBoxSizer11->Add(itemButton13, 0, wxGROW|wxALL, 5);
wxButton* itemButton14 = new wxButton( itemDialog1, wxID_CLOSE, _("&Close"), wxDefaultPosition, wxDefaultSize, 0 );
itemBoxSizer11->Add(itemButton14, 0, wxGROW|wxALL, 5);
wxStaticText* itemStaticText15 = new wxStaticText( itemDialog1, wxID_STATIC, _("Messages:"), wxDefaultPosition, wxDefaultSize, 0 );
m_MainSizer->Add(itemStaticText15, 0, wxGROW|wxLEFT|wxRIGHT|wxTOP|wxADJUST_MINSIZE, 5);
m_logWindow = new wxTextCtrl( itemDialog1, ID_TEXTCTRL, _T(""), wxDefaultPosition, wxSize(-1, 200), wxTE_MULTILINE|wxTE_READONLY );
m_MainSizer->Add(m_logWindow, 0, wxGROW|wxLEFT|wxRIGHT|wxBOTTOM, 5);
////@end WinEDA_DrcFrame content construction
AddUnitSymbol(*m_ClearenceTitle);
}
bool DialogEditModuleText::TransferDataToWindow()
{
if( !wxDialog::TransferDataToWindow() )
return false;
wxString msg;
if( m_module )
{
wxString format = m_ModuleInfoText->GetLabel();
msg.Printf( format,
GetChars( m_module->GetReference() ),
GetChars( m_module->GetValue() ),
m_module->GetOrientation() / 10.0 );
}
else
{
msg.Empty();
}
m_ModuleInfoText->SetLabel( msg );
// Create a list of not allowed layers.
// could be slightly dependent of the type of footprint text.
LSET forbiddenLayers( LSET::AllCuMask() );
forbiddenLayers.set( Edge_Cuts ).set( Margin ).set( F_Paste ).set( B_Paste ).set( F_Mask ).set( B_Mask );
switch( m_currentText->GetType() )
{
case TEXTE_MODULE::TEXT_is_VALUE:
m_TextDataTitle->SetLabel( _( "Value:" ) );
break;
case TEXTE_MODULE::TEXT_is_DIVERS:
m_TextDataTitle->SetLabel( _( "Text:" ) );
break;
case TEXTE_MODULE::TEXT_is_REFERENCE:
m_TextDataTitle->SetLabel( _( "Reference:" ) );
break;
}
m_Name->SetValue( m_currentText->GetText() );
m_Style->SetSelection( m_currentText->IsItalic() ? 1 : 0 );
AddUnitSymbol( *m_SizeXTitle );
PutValueInLocalUnits( *m_TxtSizeCtrlX, m_currentText->GetSize().x );
AddUnitSymbol( *m_SizeYTitle );
PutValueInLocalUnits( *m_TxtSizeCtrlY, m_currentText->GetSize().y );
AddUnitSymbol( *m_PosXTitle );
PutValueInLocalUnits( *m_TxtPosCtrlX, m_currentText->GetPos0().x );
AddUnitSymbol( *m_PosYTitle );
PutValueInLocalUnits( *m_TxtPosCtrlY, m_currentText->GetPos0().y );
AddUnitSymbol( *m_WidthTitle );
PutValueInLocalUnits( *m_TxtWidthCtlr, m_currentText->GetThickness() );
double text_orient = m_currentText->GetOrientation();
NORMALIZE_ANGLE_90( text_orient );
if( (text_orient != 0) )
m_Orient->SetSelection( 1 );
if( !m_currentText->IsVisible() )
m_Show->SetSelection( 1 );
bool custom_orientation = false;
switch( int( text_orient ) )
{
case 0:
m_Orient->SetSelection( 0 );
break;
case 900:
m_Orient->SetSelection( 1 );
break;
case -900:
m_Orient->SetSelection( 2 );
break;
default:
m_Orient->SetSelection( 3 );
custom_orientation = true;
break;
}
m_OrientValueCtrl->Enable( custom_orientation );
m_OrientValue = text_orient / 10.0;
m_OrientValidator.TransferToWindow();
// Configure the layers list selector
if( !m_parent->GetBoard()->IsLayerEnabled( m_currentText->GetLayer() ) )
// Footprints are built outside the current board, so items cann be
// on a not activated layer, therefore show it if happens.
m_LayerSelectionCtrl->ShowNonActivatedLayers( true );
m_LayerSelectionCtrl->SetLayersHotkeys( false );
m_LayerSelectionCtrl->SetLayerSet( forbiddenLayers );
m_LayerSelectionCtrl->SetBoardFrame( m_parent );
m_LayerSelectionCtrl->Resync();
if( m_LayerSelectionCtrl->SetLayerSelection( m_currentText->GetLayer() ) < 0 )
{
wxMessageBox( _( "This item has an illegal layer id.\n"
"Now, forced on the front silk screen layer. Please, fix it" ) );
m_LayerSelectionCtrl->SetLayerSelection( F_SilkS );
}
return true;
}
void DIALOG_NON_COPPER_ZONES_EDITOR::Init()
{
BOARD* board = m_parent->GetBoard();
SetReturnCode( ZONE_ABORT ); // Will be changed on button click
AddUnitSymbol( *m_MinThicknessValueTitle, g_UserUnit );
wxString msg = StringFromValue( g_UserUnit, m_settings.m_ZoneMinThickness );
m_ZoneMinThicknessCtrl->SetValue( msg );
if( m_settings.m_Zone_45_Only )
m_OrientEdgesOpt->SetSelection( 1 );
switch( m_settings.m_Zone_HatchingStyle )
{
case CPolyLine::NO_HATCH:
m_OutlineAppearanceCtrl->SetSelection( 0 );
break;
case CPolyLine::DIAGONAL_EDGE:
m_OutlineAppearanceCtrl->SetSelection( 1 );
break;
case CPolyLine::DIAGONAL_FULL:
m_OutlineAppearanceCtrl->SetSelection( 2 );
break;
}
// Create one column in m_LayerSelectionCtrl
wxListItem column0;
column0.SetId( 0 );
m_LayerSelectionCtrl->InsertColumn( 0, column0 );
// Create an icon list:
wxImageList* imageList = new wxImageList( LAYER_BITMAP_SIZE_X, LAYER_BITMAP_SIZE_Y );
m_LayerSelectionCtrl->AssignImageList( imageList, wxIMAGE_LIST_SMALL );
int lyrSelect = ( (PCB_SCREEN*) m_parent->GetScreen() )->m_Active_Layer;
if( m_zone )
lyrSelect = m_zone->GetLayer();
int ctrlWidth = 0; // Min width for m_LayerSelectionCtrl to show the layers names
int imgIdx = 0;
for( LSEQ seq = LSET::AllNonCuMask().Seq(); seq; ++seq, ++imgIdx )
{
LAYER_ID layer = *seq;
EDA_COLOR_T layerColor = board->GetLayerColor( layer );
imageList->Add( makeLayerBitmap( layerColor ) );
wxString msg = board->GetLayerName( layer );
msg.Trim();
int itemIndex = m_LayerSelectionCtrl->InsertItem(
m_LayerSelectionCtrl->GetItemCount(), msg, imgIdx );
if(lyrSelect == layer )
m_LayerSelectionCtrl->Select( itemIndex );
wxSize tsize( GetTextSize( msg, m_LayerSelectionCtrl ) );
ctrlWidth = std::max( ctrlWidth, tsize.x );
}
// The most easy way to ensure the right size is to use wxLIST_AUTOSIZE
// unfortunately this option does not work well both on
// wxWidgets 2.8 ( column witdth too small), and
// wxWidgets 2.9 ( column witdth too large)
ctrlWidth += LAYER_BITMAP_SIZE_X + 25; // Add bitmap width + margin between bitmap and text
m_LayerSelectionCtrl->SetColumnWidth( 0, ctrlWidth );
ctrlWidth += 25; // add small margin between text and window borders
// and room for vertical scroll bar
m_LayerSelectionCtrl->SetMinSize( wxSize( ctrlWidth, -1 ) );
}
