/**
* Creates a #View3DControl handle and sets up
* the view for first-person style navigation.
*/
struct View3DCameraControl *ED_view3d_cameracontrol_aquire(
Scene *scene, View3D *v3d, RegionView3D *rv3d,
const bool use_parent_root)
{
View3DCameraControl *vctrl;
vctrl = MEM_callocN(sizeof(View3DCameraControl), __func__);
/* Store context */
vctrl->ctx_scene = scene;
vctrl->ctx_v3d = v3d;
vctrl->ctx_rv3d = rv3d;
vctrl->use_parent_root = use_parent_root;
vctrl->persp_backup = rv3d->persp;
vctrl->dist_backup = rv3d->dist;
/* check for flying ortho camera - which we cant support well
* we _could_ also check for an ortho camera but this is easier */
if ((rv3d->persp == RV3D_CAMOB) &&
(rv3d->is_persp == false))
{
((Camera *)v3d->camera->data)->type = CAM_PERSP;
vctrl->is_ortho_cam = true;
}
if (rv3d->persp == RV3D_CAMOB) {
Object *ob_back;
if (use_parent_root && (vctrl->root_parent = v3d->camera->parent)) {
while (vctrl->root_parent->parent)
vctrl->root_parent = vctrl->root_parent->parent;
ob_back = vctrl->root_parent;
}
else {
ob_back = v3d->camera;
}
/* store the original camera loc and rot */
vctrl->obtfm = BKE_object_tfm_backup(ob_back);
BKE_object_where_is_calc(scene, v3d->camera);
negate_v3_v3(rv3d->ofs, v3d->camera->obmat[3]);
rv3d->dist = 0.0;
}
else {
float tvec[3];
/* perspective or ortho */
if (rv3d->persp == RV3D_ORTHO)
rv3d->persp = RV3D_PERSP; /* if ortho projection, make perspective */
copy_qt_qt(vctrl->rot_backup, rv3d->viewquat);
copy_v3_v3(vctrl->ofs_backup, rv3d->ofs);
/* the dist defines a vector that is infront of the offset
* to rotate the view about.
* this is no good for fly mode because we
* want to rotate about the viewers center.
* but to correct the dist removal we must
* alter offset so the view doesn't jump. */
rv3d->dist = 0.0f;
copy_v3_fl3(tvec, 0.0f, 0.0f, vctrl->dist_backup);
mul_mat3_m4_v3(rv3d->viewinv, tvec);
sub_v3_v3(rv3d->ofs, tvec);
/* Done with correcting for the dist */
}
ED_view3d_to_m4(vctrl->view_mat_prev, rv3d->ofs, rv3d->viewquat, rv3d->dist);
return vctrl;
}
static bool initFlyInfo(bContext *C, FlyInfo *fly, wmOperator *op, const wmEvent *event)
{
wmWindow *win = CTX_wm_window(C);
float upvec[3]; /* tmp */
float mat[3][3];
fly->rv3d = CTX_wm_region_view3d(C);
fly->v3d = CTX_wm_view3d(C);
fly->ar = CTX_wm_region(C);
fly->scene = CTX_data_scene(C);
#ifdef NDOF_FLY_DEBUG
puts("\n-- fly begin --");
#endif
/* sanity check: for rare but possible case (if lib-linking the camera fails) */
if ((fly->rv3d->persp == RV3D_CAMOB) && (fly->v3d->camera == NULL)) {
fly->rv3d->persp = RV3D_PERSP;
}
if (fly->rv3d->persp == RV3D_CAMOB && fly->v3d->camera->id.lib) {
BKE_report(op->reports, RPT_ERROR, "Cannot fly a camera from an external library");
return false;
}
if (ED_view3d_offset_lock_check(fly->v3d, fly->rv3d)) {
BKE_report(op->reports, RPT_ERROR, "Cannot fly when the view offset is locked");
return false;
}
if (fly->rv3d->persp == RV3D_CAMOB && fly->v3d->camera->constraints.first) {
BKE_report(op->reports, RPT_ERROR, "Cannot fly an object with constraints");
return false;
}
fly->state = FLY_RUNNING;
fly->speed = 0.0f;
fly->axis = 2;
fly->pan_view = false;
fly->xlock = FLY_AXISLOCK_STATE_OFF;
fly->zlock = FLY_AXISLOCK_STATE_OFF;
fly->xlock_momentum = 0.0f;
fly->zlock_momentum = 0.0f;
fly->grid = 1.0f;
fly->use_precision = false;
fly->use_freelook = false;
#ifdef NDOF_FLY_DRAW_TOOMUCH
fly->redraw = 1;
#endif
zero_v3(fly->dvec_prev);
fly->timer = WM_event_add_timer(CTX_wm_manager(C), win, TIMER, 0.01f);
copy_v2_v2_int(fly->mval, event->mval);
fly->ndof = NULL;
fly->time_lastdraw = fly->time_lastwheel = PIL_check_seconds_timer();
fly->draw_handle_pixel = ED_region_draw_cb_activate(fly->ar->type, drawFlyPixel, fly, REGION_DRAW_POST_PIXEL);
fly->rv3d->rflag |= RV3D_NAVIGATING; /* so we draw the corner margins */
/* detect weather to start with Z locking */
upvec[0] = 1.0f;
upvec[1] = 0.0f;
upvec[2] = 0.0f;
copy_m3_m4(mat, fly->rv3d->viewinv);
mul_m3_v3(mat, upvec);
if (fabsf(upvec[2]) < 0.1f) {
fly->zlock = FLY_AXISLOCK_STATE_IDLE;
}
upvec[0] = 0;
upvec[1] = 0;
upvec[2] = 0;
fly->persp_backup = fly->rv3d->persp;
fly->dist_backup = fly->rv3d->dist;
/* check for flying ortho camera - which we cant support well
* we _could_ also check for an ortho camera but this is easier */
if ((fly->rv3d->persp == RV3D_CAMOB) &&
(fly->rv3d->is_persp == false))
{
((Camera *)fly->v3d->camera->data)->type = CAM_PERSP;
fly->is_ortho_cam = true;
}
if (fly->rv3d->persp == RV3D_CAMOB) {
Object *ob_back;
if ((U.uiflag & USER_CAM_LOCK_NO_PARENT) == 0 && (fly->root_parent = fly->v3d->camera->parent)) {
while (fly->root_parent->parent)
fly->root_parent = fly->root_parent->parent;
ob_back = fly->root_parent;
}
else {
ob_back = fly->v3d->camera;
}
/* store the original camera loc and rot */
fly->obtfm = BKE_object_tfm_backup(ob_back);
BKE_object_where_is_calc(fly->scene, fly->v3d->camera);
negate_v3_v3(fly->rv3d->ofs, fly->v3d->camera->obmat[3]);
fly->rv3d->dist = 0.0;
}
else {
/* perspective or ortho */
if (fly->rv3d->persp == RV3D_ORTHO)
fly->rv3d->persp = RV3D_PERSP; /* if ortho projection, make perspective */
copy_qt_qt(fly->rot_backup, fly->rv3d->viewquat);
copy_v3_v3(fly->ofs_backup, fly->rv3d->ofs);
/* the dist defines a vector that is infront of the offset
* to rotate the view about.
* this is no good for fly mode because we
* want to rotate about the viewers center.
* but to correct the dist removal we must
* alter offset so the view doesn't jump. */
fly->rv3d->dist = 0.0f;
upvec[2] = fly->dist_backup; /* x and y are 0 */
mul_m3_v3(mat, upvec);
sub_v3_v3(fly->rv3d->ofs, upvec);
/* Done with correcting for the dist */
}
/* center the mouse, probably the UI mafia are against this but without its quite annoying */
WM_cursor_warp(win, fly->ar->winrct.xmin + fly->ar->winx / 2, fly->ar->winrct.ymin + fly->ar->winy / 2);
return 1;
}
