/**
* Called when a connect request has been received.
*
* Context: Link Layer
*
* @param rxbuf
* @param flags
*
* @return 0: no connection started. 1: connection started
*/
int
ble_ll_adv_conn_req_rxd(uint8_t *rxbuf, struct ble_mbuf_hdr *hdr)
{
int valid;
uint8_t pyld_len;
uint8_t *inita;
uint32_t endtime;
struct ble_ll_adv_sm *advsm;
/* Check filter policy. */
valid = 0;
advsm = &g_ble_ll_adv_sm;
if (advsm->adv_filter_policy & 2) {
if (hdr->rxinfo.flags & BLE_MBUF_HDR_F_DEVMATCH) {
/* valid connection request received */
valid = 1;
}
} else {
/* If this is for us? */
if (!ble_ll_adv_addr_cmp(rxbuf)) {
/*
* Only accept connect requests from the desired address if we
* are doing directed advertising
*/
if ((advsm->adv_type == BLE_HCI_ADV_TYPE_ADV_DIRECT_IND_HD) ||
(advsm->adv_type == BLE_HCI_ADV_TYPE_ADV_DIRECT_IND_LD)) {
/* XXX: not sure if this works if address is random */
/* Compare addresses */
inita = rxbuf + BLE_LL_PDU_HDR_LEN;
if (!memcmp(advsm->initiator_addr, inita, BLE_DEV_ADDR_LEN)) {
valid = 1;
}
} else {
valid = 1;
}
}
}
if (valid) {
/* Try to start slave connection. If successful, stop advertising */
pyld_len = rxbuf[1] & BLE_ADV_PDU_HDR_LEN_MASK;
endtime = hdr->beg_cputime + BLE_TX_DUR_USECS_M(pyld_len);
valid = ble_ll_conn_slave_start(rxbuf, endtime);
if (valid) {
ble_ll_adv_sm_stop(advsm);
}
}
return valid;
}
static void
ble_ll_adv_set_sched(struct ble_ll_adv_sm *advsm, int sched_new)
{
uint32_t max_usecs;
struct ble_ll_sched_item *sch;
sch = &advsm->adv_sch;
sch->cb_arg = advsm;
sch->sched_cb = ble_ll_adv_tx_start_cb;
sch->sched_type = BLE_LL_SCHED_TYPE_ADV;
/* Set end time to maximum time this schedule item may take */
max_usecs = BLE_TX_DUR_USECS_M(advsm->adv_pdu_len);
switch (advsm->adv_type) {
case BLE_HCI_ADV_TYPE_ADV_DIRECT_IND_LD:
case BLE_HCI_ADV_TYPE_ADV_DIRECT_IND_HD:
max_usecs += BLE_LL_ADV_DIRECT_SCHED_MAX_USECS;
break;
case BLE_HCI_ADV_TYPE_ADV_IND:
case BLE_HCI_ADV_TYPE_ADV_SCAN_IND:
max_usecs += BLE_LL_ADV_SCHED_MAX_USECS;
break;
default:
break;
}
/*
* XXX: For now, just schedule some additional time so we insure we have
* enough time to do everything we want.
*/
max_usecs += XCVR_PROC_DELAY_USECS;
if (sched_new) {
/*
* We have to add the scheduling delay and tx start delay to the max
* time of the event since the pdu does not start at the scheduled start.
*/
max_usecs += XCVR_TX_SCHED_DELAY_USECS;
sch->start_time = os_cputime_get32();
sch->end_time = sch->start_time + os_cputime_usecs_to_ticks(max_usecs);
} else {
sch->start_time = advsm->adv_pdu_start_time -
os_cputime_usecs_to_ticks(XCVR_TX_SCHED_DELAY_USECS);
sch->end_time = advsm->adv_pdu_start_time +
os_cputime_usecs_to_ticks(max_usecs);
}
}
/**
* Called when a connect request has been received.
*
* Context: Link Layer
*
* @param rxbuf
* @param flags
*
* @return 0: no connection started. 1: connection started
*/
int
ble_ll_adv_conn_req_rxd(uint8_t *rxbuf, struct ble_mbuf_hdr *hdr)
{
int valid;
uint8_t pyld_len;
#if MYNEWT_VAL(BLE_LL_CFG_FEAT_LL_PRIVACY)
uint8_t resolved;
#endif
uint8_t addr_type;
uint8_t *inita;
uint8_t *ident_addr;
uint32_t endtime;
struct ble_ll_adv_sm *advsm;
/* Check filter policy. */
valid = 0;
#if MYNEWT_VAL(BLE_LL_CFG_FEAT_LL_PRIVACY)
resolved = BLE_MBUF_HDR_RESOLVED(hdr);
#endif
advsm = &g_ble_ll_adv_sm;
inita = rxbuf + BLE_LL_PDU_HDR_LEN;
if (hdr->rxinfo.flags & BLE_MBUF_HDR_F_DEVMATCH) {
valid = 1;
if (rxbuf[0] & BLE_ADV_PDU_HDR_TXADD_MASK) {
addr_type = BLE_ADDR_TYPE_RANDOM;
} else {
addr_type = BLE_ADDR_TYPE_PUBLIC;
}
/*
* Only accept connect requests from the desired address if we
* are doing directed advertising
*/
if ((advsm->adv_type == BLE_HCI_ADV_TYPE_ADV_DIRECT_IND_HD) ||
(advsm->adv_type == BLE_HCI_ADV_TYPE_ADV_DIRECT_IND_LD)) {
ident_addr = inita;
#if MYNEWT_VAL(BLE_LL_CFG_FEAT_LL_PRIVACY)
if (resolved) {
ident_addr = g_ble_ll_resolv_list[advsm->adv_rpa_index].rl_identity_addr;
addr_type = g_ble_ll_resolv_list[advsm->adv_rpa_index].rl_addr_type;
}
#endif
if ((addr_type != advsm->peer_addr_type) ||
memcmp(advsm->peer_addr, ident_addr, BLE_DEV_ADDR_LEN)) {
valid = 0;
}
}
}
if (valid) {
#if MYNEWT_VAL(BLE_LL_CFG_FEAT_LL_PRIVACY)
if (resolved) {
/* Retain the resolvable private address that we received. */
memcpy(advsm->adv_rpa, inita, BLE_DEV_ADDR_LEN);
/*
* Overwrite received inita with identity address since that
* is used from now on.
*/
memcpy(inita,
g_ble_ll_resolv_list[advsm->adv_rpa_index].rl_identity_addr,
BLE_DEV_ADDR_LEN);
/* Peer address type is an identity address */
addr_type = g_ble_ll_resolv_list[advsm->adv_rpa_index].rl_addr_type;
addr_type += 2;
}
#endif
/* Try to start slave connection. If successful, stop advertising */
pyld_len = rxbuf[1] & BLE_ADV_PDU_HDR_LEN_MASK;
endtime = hdr->beg_cputime + BLE_TX_DUR_USECS_M(pyld_len);
valid = ble_ll_conn_slave_start(rxbuf, endtime, addr_type);
if (valid) {
ble_ll_adv_sm_stop(advsm);
}
}
return valid;
}
/**
* Called from interrupt context when the transmit ends
*
*/
static void
ble_phy_tx_end_isr(void)
{
uint8_t was_encrypted;
uint8_t transition;
uint8_t txlen;
uint32_t wfr_time;
uint32_t txstart;
/*
* Read captured tx start time. This is not the actual transmit start
* time but it is the time at which the address event occurred
* (after transmission of access address)
*/
txstart = NRF_TIMER0->CC[1];
/* If this transmission was encrypted we need to remember it */
was_encrypted = g_ble_phy_data.phy_encrypted;
/* Better be in TX state! */
assert(g_ble_phy_data.phy_state == BLE_PHY_STATE_TX);
/* Log the event */
ble_ll_log(BLE_LL_LOG_ID_PHY_TXEND, g_ble_phy_data.phy_tx_pyld_len,
was_encrypted, txstart);
/* Clear events and clear interrupt on disabled event */
NRF_RADIO->EVENTS_DISABLED = 0;
NRF_RADIO->INTENCLR = RADIO_INTENCLR_DISABLED_Msk;
NRF_RADIO->EVENTS_END = 0;
wfr_time = NRF_RADIO->SHORTS;
#if (MYNEWT_VAL(BLE_LL_CFG_FEAT_LE_ENCRYPTION) == 1)
/*
* XXX: not sure what to do. We had a HW error during transmission.
* For now I just count a stat but continue on like all is good.
*/
if (was_encrypted) {
if (NRF_CCM->EVENTS_ERROR) {
STATS_INC(ble_phy_stats, tx_hw_err);
NRF_CCM->EVENTS_ERROR = 0;
}
}
#endif
/* Call transmit end callback */
if (g_ble_phy_data.txend_cb) {
g_ble_phy_data.txend_cb(g_ble_phy_data.txend_arg);
}
transition = g_ble_phy_data.phy_transition;
if (transition == BLE_PHY_TRANSITION_TX_RX) {
/* Packet pointer needs to be reset. */
ble_phy_rx_xcvr_setup();
/*
* Enable the wait for response timer. Note that cc #1 on
* timer 0 contains the transmit start time
*/
txlen = g_ble_phy_data.phy_tx_pyld_len;
if (txlen && was_encrypted) {
txlen += BLE_LL_DATA_MIC_LEN;
}
wfr_time = BLE_LL_WFR_USECS - BLE_TX_LEN_USECS_M(NRF_RX_START_OFFSET);
wfr_time += BLE_TX_DUR_USECS_M(txlen);
wfr_time = os_cputime_usecs_to_ticks(wfr_time);
ble_ll_wfr_enable(txstart + wfr_time);
} else {
/* Disable automatic TXEN */
NRF_PPI->CHENCLR = PPI_CHEN_CH20_Msk;
assert(transition == BLE_PHY_TRANSITION_NONE);
}
}
