//When the user removes a section from a building, it will not only erase the
//entire highlighted area, it'll repair the building itself so there are no
//outside walls missing from the new building.
void RemoveBuildingSectionFromWorld( SGPRect *pSelectRegion )
{
UINT32 top, left, right, bottom, x, y;
UINT32 iMapIndex;
UINT16 usTileIndex;
UINT16 usFloorType;
BOOLEAN fFloor;
top = pSelectRegion->iTop;
left = pSelectRegion->iLeft;
right = pSelectRegion->iRight;
bottom = pSelectRegion->iBottom;
//1ST PASS: Erase all building owned by the floor tile if there is one.
for( y = top; y <= bottom; y++ ) for( x = left; x <= right; x++ )
{
iMapIndex = y * WORLD_COLS + x;
EraseFloorOwnedBuildingPieces( iMapIndex ); //Erase possible top and left walls in bordering tiles.
}
//2ND PASS: Build new walls whereever there are neighboring floor tiles.
for( y = top; y <= bottom; y++ ) for( x = left; x <= right; x++ )
{
iMapIndex = y * WORLD_COLS + x;
//NOTE: Top and bottom walls MUST be placed first -- it minimizes the number of special cases.
if( y == top )
{
fFloor = FloorAtGridNo( iMapIndex - WORLD_COLS );
if( gfBasement && !fFloor || !gfBasement && fFloor && !GetHorizontalWall( iMapIndex - WORLD_COLS ) )
BuildWallPiece( iMapIndex, EXTERIOR_TOP, 0 );
}
if( y == bottom )
{
fFloor = FloorAtGridNo( iMapIndex + WORLD_COLS );
if( gfBasement && !fFloor || !gfBasement && fFloor && !GetHorizontalWall( iMapIndex ) )
BuildWallPiece( iMapIndex, EXTERIOR_BOTTOM, 0 );
}
if( x == left )
{
fFloor = FloorAtGridNo( iMapIndex - 1 );
if( gfBasement && !fFloor || !gfBasement && fFloor && !GetVerticalWall( iMapIndex - 1 ) )
BuildWallPiece( iMapIndex, EXTERIOR_LEFT, 0 );
}
if( x == right )
{
fFloor = FloorAtGridNo( iMapIndex + 1);
if( gfBasement && !fFloor || !gfBasement && fFloor && !GetVerticalWall( iMapIndex ) )
BuildWallPiece( iMapIndex, EXTERIOR_RIGHT, 0 );
}
}
//3RD PASS: Go around the outside of the region, and rebuild the roof.
if( gfBasement )
{
usFloorType = GetRandomIndexByRange( FIRSTFLOOR, LASTFLOOR );
if( usFloorType == 0xffff )
usFloorType = FIRSTFLOOR;
for( y = top; y <= bottom; y++ ) for( x = left; x <= right; x++ )
{
iMapIndex = y * WORLD_COLS + x;
GetTileIndexFromTypeSubIndex( usFloorType, 1, &usTileIndex );
AddLandToHead( iMapIndex, (UINT16)( usTileIndex + Random( FLOOR_VARIANTS ) ) );
}
}
for( y = top - 1; y <= bottom + 1; y++ ) for( x = left - 1; x <= right + 1; x++ )
{
iMapIndex = y * WORLD_COLS + x;
if( y == top - 1 || y == bottom + 1 || x == left - 1 || x == right + 1 )
{
if( !gfBasement && FloorAtGridNo( iMapIndex ) || gfBasement && !FloorAtGridNo( iMapIndex ) )
{
RebuildRoof( iMapIndex, 0 );
}
}
}
}
void AddBuildingSectionToWorld( SGPRect *pSelectRegion )
{
INT32 top, left, right, bottom, x, y;
UINT32 iMapIndex;
UINT16 usFloorType, usWallType, usRoofType;
UINT16 usTileIndex;
BOOLEAN fNewBuilding;
BOOLEAN fSlantRoof = FALSE;
BOOLEAN fVertical;
BOOLEAN fFloor;
top = pSelectRegion->iTop;
left = pSelectRegion->iLeft;
right = pSelectRegion->iRight;
bottom = pSelectRegion->iBottom;
//Special case scenario:
//If the user selects a floor without walls, then it is implied that the user wishes to
//change the floor for say a kitchen which might have a different floor type.
usWallType = GetRandomIndexByRange( FIRSTWALL, LASTWALL );
usFloorType = GetRandomIndexByRange( FIRSTFLOOR, LASTFLOOR );
if( usWallType == 0xffff && usFloorType != 0xffff )
{ //allow user to place floors
for( y = top; y <= bottom; y++ ) for( x = left; x <= right; x++ )
{
iMapIndex = y * WORLD_COLS + x;
EraseFloor( iMapIndex );
GetTileIndexFromTypeSubIndex( usFloorType, 1, &usTileIndex );
AddLandToHead( iMapIndex, (UINT16)( usTileIndex + Random( FLOOR_VARIANTS ) ) );
}
//we are done!
return;
}
//1ST PASS: Determine if there are any floor tiles in this region. If there are, then
// that signifies that we are concantenating this building to an existing one. Otherwise,
// we are just drawing an individual building. If we find a floor, extract the type so
// we know how to draw it later.
fNewBuilding = TRUE;
for( y = top; y <= bottom; y++ ) for( x = left; x <= right; x++ )
{
iMapIndex = y * WORLD_COLS + x;
if( FloorAtGridNo( iMapIndex ) )
{
LEVELNODE *pFloor;
UINT32 uiTileType;
//If a floor is found, then we are adding to an existing structure.
fNewBuilding = FALSE;
//Extract the floor type. We already checked if there was a floor here, so it is assumed.
pFloor = gpWorldLevelData[ iMapIndex ].pLandHead;
while( pFloor )
{
GetTileType( pFloor->usIndex, &uiTileType );
if( uiTileType >= FIRSTFLOOR && uiTileType <= LASTFLOOR )
{
usFloorType = (UINT16)uiTileType;
break;
}
}
usWallType = SearchForWallType( iMapIndex );
usRoofType = SearchForRoofType( iMapIndex );
if( usWallType != 0xffff && usRoofType != 0xffff && usFloorType !=0xffff )
{ //we have extracted all of the information we need, so we can break out.
y = bottom;
break;
}
}
}
if( fNewBuilding )
{
//if( gfBasement )
// return;
//Get materials via selection window method.
usWallType = GetRandomIndexByRange( FIRSTWALL, LASTWALL );
usFloorType = GetRandomIndexByRange( FIRSTFLOOR, LASTFLOOR );
usRoofType = GetRandomIndexByRange( FIRSTROOF, LASTROOF );
if( usRoofType == 0xffff )
{
usRoofType = GetRandomIndexByRange( FIRSTSLANTROOF, LASTSLANTROOF );
if( usRoofType != 0xffff )
{
if( !gfBasement )
fSlantRoof = TRUE;
else
usRoofType = FIRSTROOF;
}
}
if( usWallType == 0xffff )
return;
}
//2ND PASS: Remove all walls in the region that border no floor tile, or simply walls
// that are considered exterior walls. That way, it won't wreck the inside of a building
// if you select too much interior. Also, gridnos that delete walls will also delete the
// floor and roof tiles there. That signifies that the floorless parts will be resmoothed,
// and rebuilt in the third pass.
for( y = top; y <= bottom; y++ ) for( x = left; x <= right; x++ )
{
iMapIndex = y * WORLD_COLS + x;
if( gfBasement )
{
EraseBuilding( iMapIndex );
}
else if( FloorAtGridNo( iMapIndex ) && !fNewBuilding)
{
if( y >= top && !FloorAtGridNo( iMapIndex - WORLD_COLS ) )
{
EraseHorizontalWall( iMapIndex - WORLD_COLS );
EraseFloor( iMapIndex );
EraseRoof( iMapIndex );
}
if( y <= bottom && !FloorAtGridNo( iMapIndex + WORLD_COLS ) )
{
EraseHorizontalWall( iMapIndex );
EraseFloor( iMapIndex );
EraseRoof( iMapIndex );
}
if( x >= left && !FloorAtGridNo( iMapIndex - 1 ) )
{
EraseVerticalWall( iMapIndex - 1 );
EraseFloor( iMapIndex );
EraseRoof( iMapIndex );
}
if( x <= right && !FloorAtGridNo( iMapIndex + 1 ) )
{
EraseVerticalWall( iMapIndex );
EraseFloor( iMapIndex );
EraseRoof( iMapIndex );
}
}
else //we will be building outside of this structure, so bulldoze the nature -- trees, rocks, etc.
{
BulldozeNature( iMapIndex );
}
}
//3RD PASS: Process the region, and all walls of floorless tiles are rebuilt from interior perspective.
for( y = top; y <= bottom; y++ ) for( x = left; x <= right; x++ )
{
iMapIndex = y * WORLD_COLS + x;
if( !FloorAtGridNo( iMapIndex ) )
{
if( y == top && !GetHorizontalWall( iMapIndex - WORLD_COLS ) )
{
fFloor = FloorAtGridNo( iMapIndex - WORLD_COLS );
if( gfBasement == fFloor )
BuildWallPiece( iMapIndex, INTERIOR_TOP, usWallType);
}
if( y == bottom && !GetHorizontalWall( iMapIndex ) )
{
fFloor = FloorAtGridNo( iMapIndex + WORLD_COLS );
if( gfBasement == fFloor )
BuildWallPiece( iMapIndex, INTERIOR_BOTTOM, usWallType );
}
if( x == left && !GetVerticalWall( iMapIndex - 1 ) )
{
fFloor = FloorAtGridNo( iMapIndex - 1 );
if( gfBasement == fFloor )
BuildWallPiece( iMapIndex, INTERIOR_LEFT, usWallType );
}
if( x == right && !GetVerticalWall( iMapIndex ) )
{
fFloor = FloorAtGridNo( iMapIndex + 1 );
if( gfBasement == fFloor )
BuildWallPiece( iMapIndex, INTERIOR_RIGHT, usWallType );
}
}
}
//If we are dealing with slant roofs then build the whole thing now.
//Slant roofs always have a width or height of 8 tiles.
if( fSlantRoof )
{
fVertical = (bottom - top == 7) ? FALSE : TRUE;
BuildSlantRoof( left, top, right, bottom, usWallType, usRoofType, fVertical );
}
//4TH PASS: Process the region, and all floorless tiles get new roofs and floors.
for( y = top; y <= bottom; y++ ) for( x = left; x <= right; x++ )
{
iMapIndex = y * WORLD_COLS + x;
if( !FloorAtGridNo( iMapIndex ) )
{
if( !fSlantRoof )
RebuildRoof( iMapIndex, usRoofType );
if( usFloorType != 0xffff && !gfBasement )
{
GetTileIndexFromTypeSubIndex( usFloorType, 1, &usTileIndex );
AddLandToHead( iMapIndex, (UINT16)( usTileIndex + Random( FLOOR_VARIANTS ) ) );
}
}
}
}
//This is a very difficult function to document properly. The reason being is that it is sooo
//subliminal by nature. I have thought up of priorities and choose the best piece to draw based
//on the surrounding conditions. Here are the priorities which are referenced below via comments:
//A) If there is currently a bottom piece and a right piece, immediately exit.
//B) We are currently over a bottom piece. Now, we don't automatically want to draw a right piece here
// for multiple reasons. First, the UI will be too quick and place bottom and right pieces for every
// place the user clicks, which isn't what we want. Therefore, we look to see if there is a right
// piece in the y-1 gridno. It would then make sense to place a right piece down here. Regardless,
// if we encounter a bottom piece here, we will exit.
//C) This is the counterpart to B, but we are looking at a current right piece, and are determining if
// we should place a bottom piece based on another bottom piece existing in the x-1 gridno.
//D) Now, we analyse the neighboring tiles and determine the orientations that would add weight to the
// current tile either towards drawing a horizontal piece or a vertical piece.
//E) Now that we have the information, we give the highest priority to any weights that match the current
// wall piece type selected by the user. Based on that, we will only consider the best match of the
// type and use it. If there are no matches on type, we continue.
//F) We failed to find weights matching the current wall type, but before we give up using the user's wall
// type, there are two more cases. When there is a bottom wall in the y+1 position or a right wall in
// the x+1 position. If there are matching walls, there, then we draw two pieces to connect the current
// gridno with the respective position.
void PasteSmartWall( INT32 iMapIndex )
{
static BOOLEAN fWallAlone = FALSE;
static UINT32 iAloneMapIndex = 0x80000000;
UINT16 usWallType;
//These are the counters for the walls of each type
UINT16 usNumV[4]={0,0,0,0}; //vertical wall weights
UINT16 usNumH[4]={0,0,0,0}; //horizontal wall weights
//*A* See above documentation
if( GetVerticalWall( iMapIndex ) && GetHorizontalWall( iMapIndex ) )
return;
//*B* See above documentation
usWallType = GetHorizontalWallType( iMapIndex );
if( usWallType )
{
if( usWallType == gubWallUIValue )
{
usWallType = GetVerticalWallType( iMapIndex - WORLD_COLS );
if( usWallType == gubWallUIValue )
{
if( FloorAtGridNo( iMapIndex + 1 ) )
BuildWallPiece( iMapIndex, EXTERIOR_RIGHT, gubWallUIValue );
else
BuildWallPiece( iMapIndex, INTERIOR_RIGHT, gubWallUIValue );
return;
}
usWallType = GetHorizontalWallType( iMapIndex - WORLD_COLS );
if( usWallType == gubWallUIValue )
{
if( FloorAtGridNo( iMapIndex + 1 ) )
{
BuildWallPiece( iMapIndex, EXTERIOR_RIGHT, gubWallUIValue );
if( !GetHorizontalWall( iMapIndex - WORLD_COLS + 1 ) )
ChangeVerticalWall( iMapIndex, INTERIOR_EXTENDED );
}
else
{
BuildWallPiece( iMapIndex, INTERIOR_RIGHT, gubWallUIValue );
if( !GetHorizontalWall( iMapIndex - WORLD_COLS + 1 ) )
ChangeVerticalWall( iMapIndex, EXTERIOR_EXTENDED );
}
}
}
return;
}
//*C* See above documentation
usWallType = GetVerticalWallType( iMapIndex );
if( usWallType )
{
if( usWallType == gubWallUIValue )
{
usWallType = GetHorizontalWallType( iMapIndex - 1 );
if( usWallType == gubWallUIValue )
{
if( FloorAtGridNo( iMapIndex + WORLD_COLS ) )
BuildWallPiece( iMapIndex, EXTERIOR_BOTTOM, gubWallUIValue );
else
BuildWallPiece( iMapIndex, INTERIOR_BOTTOM, gubWallUIValue );
}
}
return;
}
//*D* See above documentation
//Evaluate left adjacent tile
if( usWallType = GetVerticalWallType( iMapIndex - 1 ) )
usNumH[ usWallType - FIRSTWALL ]++;
if( usWallType = GetHorizontalWallType( iMapIndex - 1 ) )
usNumH[ usWallType - FIRSTWALL ]++;
//Evaluate right adjacent tile
if( usWallType = GetHorizontalWallType( iMapIndex + 1 ) )
usNumH[ usWallType - FIRSTWALL ]++;
//Evaluate upper adjacent tile
if( usWallType = GetVerticalWallType( iMapIndex - WORLD_COLS ) )
usNumV[ usWallType - FIRSTWALL ]++;
if( usWallType = GetHorizontalWallType( iMapIndex - WORLD_COLS ) )
usNumV[ usWallType - FIRSTWALL ]++;
//Evaluate lower adjacent tile
if( usWallType = GetVerticalWallType( iMapIndex + WORLD_COLS ) )
usNumV[ usWallType - FIRSTWALL ]++;
//*E* See above documentation
if( usNumV[gubWallUIValue - FIRSTWALL] | usNumH[gubWallUIValue - FIRSTWALL] )
{
if( usNumV[gubWallUIValue - FIRSTWALL] >= usNumH[gubWallUIValue - FIRSTWALL] )
{
if( FloorAtGridNo( iMapIndex + 1 ) )
{ //inside
BuildWallPiece( iMapIndex, EXTERIOR_RIGHT, gubWallUIValue );
//Change to extended piece if it is a new top right corner to cover the end part.
if( GetHorizontalWall( iMapIndex - WORLD_COLS ) && !GetHorizontalWall( iMapIndex - WORLD_COLS + 1 )
&& !GetVerticalWall( iMapIndex - WORLD_COLS ) )
ChangeVerticalWall( iMapIndex, INTERIOR_EXTENDED );
else if( GetHorizontalWall( iMapIndex - WORLD_COLS ) && !GetHorizontalWall( iMapIndex - WORLD_COLS - 1 )
&& !GetVerticalWall( iMapIndex - WORLD_COLS - 1 ) )
{
ChangeVerticalWall( iMapIndex, INTERIOR_EXTENDED );
EraseHorizontalWall( iMapIndex - WORLD_COLS );
}
}
else
{ //outside
BuildWallPiece( iMapIndex, INTERIOR_RIGHT, gubWallUIValue );
if( GetHorizontalWall( iMapIndex - WORLD_COLS ) && !GetHorizontalWall( iMapIndex - WORLD_COLS + 1 )
&& !GetVerticalWall( iMapIndex - WORLD_COLS ) )
ChangeVerticalWall( iMapIndex, EXTERIOR_EXTENDED );
else if( GetHorizontalWall( iMapIndex - WORLD_COLS ) && !GetHorizontalWall( iMapIndex - WORLD_COLS - 1 )
&& !GetVerticalWall( iMapIndex - WORLD_COLS - 1 ) )
{
ChangeVerticalWall( iMapIndex, EXTERIOR_EXTENDED );
EraseHorizontalWall( iMapIndex - WORLD_COLS );
}
}
}
else
{
if( GetVerticalWall( iMapIndex - 1 ) && !GetVerticalWall( iMapIndex - WORLD_COLS - 1 )
&& !GetHorizontalWall( iMapIndex - WORLD_COLS - 1 ) )
EraseVerticalWall( iMapIndex - 1);
if( FloorAtGridNo( iMapIndex + WORLD_COLS ) )
{ //inside
BuildWallPiece( iMapIndex, EXTERIOR_BOTTOM, gubWallUIValue );
if( GetVerticalWall( iMapIndex + WORLD_COLS ) )
ChangeVerticalWall( iMapIndex + WORLD_COLS, INTERIOR_EXTENDED );
if( GetVerticalWall( iMapIndex + WORLD_COLS - 1 ) && !GetVerticalWall( iMapIndex - 1 ) )
ChangeVerticalWall( iMapIndex + WORLD_COLS - 1, INTERIOR_EXTENDED );
else if( GetVerticalWall( iMapIndex - 1 ) && !GetVerticalWall( iMapIndex + WORLD_COLS - 1 )
&& FloorAtGridNo( iMapIndex ) )
ChangeVerticalWall( iMapIndex - 1, INTERIOR_BOTTOMEND );
}
else
{ //outside
BuildWallPiece( iMapIndex, INTERIOR_BOTTOM, gubWallUIValue );
if( GetVerticalWall( iMapIndex + WORLD_COLS ) )
ChangeVerticalWall( iMapIndex + WORLD_COLS, EXTERIOR_EXTENDED );
if( GetVerticalWall( iMapIndex + WORLD_COLS - 1 ) && !GetVerticalWall( iMapIndex - 1 ) )
ChangeVerticalWall( iMapIndex + WORLD_COLS - 1, EXTERIOR_EXTENDED );
else if( GetVerticalWall( iMapIndex - 1 ) && !GetVerticalWall( iMapIndex + WORLD_COLS - 1 )
&& FloorAtGridNo( iMapIndex ) )
ChangeVerticalWall( iMapIndex - 1, EXTERIOR_BOTTOMEND );
}
}
return;
}
//*F* See above documentation
usWallType = GetHorizontalWallType( iMapIndex + WORLD_COLS );
if( usWallType == gubWallUIValue )
{
if( !GetHorizontalWall( iMapIndex + WORLD_COLS - 1 ) )
EraseHorizontalWall( iMapIndex + WORLD_COLS );
if( FloorAtGridNo( iMapIndex + 1 ) )
{ //inside
BuildWallPiece( iMapIndex + WORLD_COLS, EXTERIOR_RIGHT, gubWallUIValue );
BuildWallPiece( iMapIndex, EXTERIOR_RIGHT, gubWallUIValue );
if( !GetVerticalWall( iMapIndex + WORLD_COLS * 2 ) && FloorAtGridNo( iMapIndex + WORLD_COLS * 2 + 1 ) )
ChangeVerticalWall( iMapIndex + WORLD_COLS, INTERIOR_BOTTOMEND );
else //override the damn other smoothing.
ChangeVerticalWall( iMapIndex + WORLD_COLS, INTERIOR_R );
}
else
{ //outside
BuildWallPiece( iMapIndex + WORLD_COLS, INTERIOR_RIGHT, gubWallUIValue );
BuildWallPiece( iMapIndex, INTERIOR_RIGHT, gubWallUIValue );
if( !GetVerticalWall( iMapIndex + WORLD_COLS * 2 ) && !FloorAtGridNo( iMapIndex + WORLD_COLS * 2 + 1 ) )
ChangeVerticalWall( iMapIndex + WORLD_COLS, EXTERIOR_BOTTOMEND );
else //override the damn other smoothing.
ChangeVerticalWall( iMapIndex + WORLD_COLS, EXTERIOR_R );
}
return;
}
usWallType = GetVerticalWallType( iMapIndex + 1 );
if( usWallType == gubWallUIValue )
{
if(FloorAtGridNo( iMapIndex + WORLD_COLS ) )
{ //inside
BuildWallPiece( iMapIndex + 1, EXTERIOR_BOTTOM, gubWallUIValue );
BuildWallPiece( iMapIndex, EXTERIOR_BOTTOM, gubWallUIValue );
if( !GetVerticalWall( iMapIndex - WORLD_COLS + 1 ) )
{
EraseVerticalWall( iMapIndex + 1 );
ChangeVerticalWall( iMapIndex + WORLD_COLS + 1, INTERIOR_EXTENDED );
}
if( !GetVerticalWall( iMapIndex + WORLD_COLS + 1) )
{
if( !GetHorizontalWall( iMapIndex - WORLD_COLS + 1) && !GetVerticalWall( iMapIndex - WORLD_COLS + 1 )
&& GetHorizontalWall( iMapIndex - WORLD_COLS + 2 ) )
ChangeVerticalWall( iMapIndex + 1, INTERIOR_EXTENDED );
else
ChangeVerticalWall( iMapIndex + 1, INTERIOR_BOTTOMEND );
}
}
else
{ //outside
BuildWallPiece( iMapIndex + 1, INTERIOR_BOTTOM, gubWallUIValue );
BuildWallPiece( iMapIndex, INTERIOR_BOTTOM, gubWallUIValue );
if( !GetVerticalWall( iMapIndex - WORLD_COLS + 1 ) )
{
EraseVerticalWall( iMapIndex + 1 );
ChangeVerticalWall( iMapIndex + WORLD_COLS + 1, EXTERIOR_EXTENDED );
}
if( !GetVerticalWall( iMapIndex + WORLD_COLS + 1) )
{
if( !GetHorizontalWall( iMapIndex - WORLD_COLS + 1) && !GetVerticalWall( iMapIndex - WORLD_COLS + 1 )
&& GetHorizontalWall( iMapIndex - WORLD_COLS + 2 ) )
ChangeVerticalWall( iMapIndex + 1, EXTERIOR_EXTENDED );
else
ChangeVerticalWall( iMapIndex + 1, EXTERIOR_BOTTOMEND );
}
}
return;
}
//Check for the highest weight value.
}
