UInt32 audio_control_dsp(UInt32 param1, UInt32 param2, UInt32 param3,
UInt32 param4, UInt32 param5, UInt32 param6)
{
UInt32 val = (UInt32) 0;
Audio_Params_t audioParam;
UInt32 tid;
/*
MsgType_t msgType;
RPC_ACK_Result_t ackResult; */
unsigned long jiff_in = 0;
aTrace(LOG_AUDIO_DRIVER,
"\n\r * audio_control_dsp (AP) param1 %ld, param2 %ld"
" param3 %ld param4 %ld *\n\r",
param1, param2, param3, param4);
if (inCpReset)
return val;
switch (param1) {
case AUDDRV_DSPCMD_COMMAND_DIGITAL_SOUND:
VPRIPCMDQ_DigitalSound((UInt16) param2);
break;
case AUDDRV_DSPCMD_COMMAND_SET_BT_NB:
VPRIPCMDQ_SetBTNarrowBand((UInt16) param2);
break;
case AUDDRV_DSPCMD_COMMAND_USB_HEADSET:
VPRIPCMDQ_USBHeadset((UInt16) param2);
break;
case AUDDRV_DSPCMD_MM_VPU_ENABLE:
VPRIPCMDQ_MMVPUEnable((UInt16) param2);
break;
case AUDDRV_DSPCMD_MM_VPU_DISABLE:
VPRIPCMDQ_MMVPUDisable();
break;
/* AMCR PCM enable bit is controlled by ARM audio */
case AUDDRV_DSPCMD_AUDIO_SET_PCM:
VPRIPCMDQ_DigitalSound((UInt16) param2);
break;
case AUDDRV_DSPCMD_COMMAND_VOIF_CONTROL:
VPRIPCMDQ_VOIFControl((UInt16) param2);
break;
case AUDDRV_DSPCMD_COMMAND_SP:
VPRIPCMDQ_SP((UInt16) param2, (UInt16) param3, (UInt16) param4);
break;
case AUDDRV_DSPCMD_COMMAND_CLEAR_VOIPMODE:
VPRIPCMDQ_Clear_VoIPMode((UInt16) param2);
break;
default:
audioParam.param1 = param1;
audioParam.param2 = param2;
audioParam.param3 = param3;
audioParam.param4 = param4;
audioParam.param5 = param5;
audioParam.param6 = param6;
tid = s_sid++; /* RPC_SyncCreateTID(&val, sizeof(UInt32)); */
aTrace(LOG_AUDIO_DRIVER,
"audio_control_dsp tid=%ld,param1=%ld\n", tid, param1);
/** init completion before send this DSP command */
if (param1 == AUDDRV_DSPCMD_AUDIO_ENABLE) {
/*aError("i_c");*/
init_completion(&audioEnableDone);
/*aError("i_d");*/
}
CAPI2_audio_control_dsp(tid, audioClientId, &audioParam);
/*
RPC_SyncWaitForResponse(tid, audioClientId, &ackResult,
&msgType, NULL);
*/
if (param1 == AUDDRV_DSPCMD_AUDIO_ENABLE) {
/** wait for response from DSP for this command.
Response usually comes back very fast, less than 10ms */
jiff_in = wait_for_completion_timeout(
&audioEnableDone,
timeout_jiff);
if (!jiff_in) {
aError("!!!Timeout on COMMAND_AUDIO_ENABLE %d"
" resp!!!\n", (int)param2);
/**
IPCCP_SetCPCrashedStatus(IPC_AP_ASSERT);
BUG_ON(1);
panic("COMMAND_AUDIO_ENABLE timeout");
*/
}
#if defined(ENABLE_DMA_VOICE)
{
UInt16 dsp_path;
dsp_path =
csl_dsp_caph_control_aadmac_get_enable_path();
csl_caph_enable_adcpath_by_dsp(dsp_path);
}
#endif
}
break;
}
return val;
}
//CAPI2
/////////////////////////////////////////////////////////////////////////////
//!
//! Function Name: audio_control_dsp
//!
//! Description: audio control dsp cmd
//!
/////////////////////////////////////////////////////////////////////////////
inline void audio_control_dsp(UInt32 param1, UInt32 param2, UInt32 param3, UInt32 param4)
{
CAPI2_audio_control_dsp(AUD_CreateTID(), BCM_AUD_HAL_CAPI2_CID, param1, param2, param3, param4);
//RPC_SyncWaitForResponse();
}
UInt32 audio_control_dsp(UInt32 param1,UInt32 param2,UInt32 param3,UInt32 param4,UInt32 param5,UInt32 param6)
{
Audio_Params_t audioParam;
UInt32 tid;
MsgType_t msgType;
RPC_ACK_Result_t ackResult;
UInt32 val = (UInt32)0;
Log_DebugPrintf(LOGID_AUDIO, "\n\r\t* audio_control_dsp (AP) param1 %d, param2 %d param3 %d param4 %d *\n\r", param1, param2, param3, param4);
switch (param1)
{
#if 0
case DSPCMD_TYPE_COMMAND_DIGITAL_SOUND:
RIPCMDQ_DigitalSound((UInt16)param2);
break;
case DSPCMD_TYPE_COMMAND_SET_ARM2SP:
RIPCMDQ_SetARM2SP((UInt16)param2, (UInt16)param3);
break;
case DSPCMD_TYPE_COMMAND_SET_ARM2SP2:
RIPCMDQ_SetARM2SP2((UInt16)param2, (UInt16)param3);
break;
case DSPCMD_TYPE_COMMAND_SET_BT_NB:
RIPCMDQ_SetBTNarrowBand((UInt16)param2);
break;
case DSPCMD_TYPE_COMMAND_USB_HEADSET:
RIPCMDQ_USBHeadset((UInt16)param2);
break;
case DSPCMD_TYPE_MM_VPU_ENABLE:
RIPCMDQ_MMVPUEnable((UInt16)param2);
break;
case DSPCMD_TYPE_MM_VPU_DISABLE:
RIPCMDQ_MMVPUDisable();
break;
// AMCR PCM enable bit is controlled by ARM audio
case DSPCMD_TYPE_AUDIO_SET_PCM:
RIPCMDQ_DigitalSound((UInt16)param2);
break;
case DSPCMD_TYPE_SET_VOCODER_INIT:
RIPCMD_Vocoder_Init((UInt16)param2);
break;
case DSPCMD_TYPE_COMMAND_VOIF_CONTROL:
RIPCMDQ_VOIFControl((UInt16)param2);
break;
case DSPCMD_TYPE_COMMAND_SP:
RIPCMDQ_SP((UInt16)param2, (UInt16)param3, (UInt16)param4);
break;
case DSPCMD_TYPE_COMMAND_CLEAR_VOIPMODE:
RIPCMDQ_Clear_VoIPMode( (UInt16) param2 );
break;
#endif
default:
Log_DebugPrintf(LOGID_AUDIO, "\n\r\t* audio_control_dsp (AP) default case param1 %d, param2 %d param3 %d param4 %d *\n\r", param1, param2, param3, param4);
audioParam.param1 = param1;
audioParam.param2 = param2;
audioParam.param3 = param3;
audioParam.param4 = param4;
audioParam.param5 = param5;
audioParam.param6 = param6;
tid = RPC_SyncCreateTID( &val, sizeof( UInt32 ) );
CAPI2_audio_control_dsp(tid, audioClientId,&audioParam);
RPC_SyncWaitForResponse( tid,audioClientId, &ackResult, &msgType, NULL );
break;
}
return val;
}
