Ejemplo n.º 1
0
struct ieee80211_regdomain *
iwl_parse_nvm_mcc_info(struct device *dev, const struct iwl_cfg *cfg,
		       int num_of_ch, __le32 *channels, u16 fw_mcc)
{
	int ch_idx;
	u16 ch_flags, prev_ch_flags = 0;
	const u8 *nvm_chan = cfg->device_family == IWL_DEVICE_FAMILY_8000 ?
			     iwl_nvm_channels_family_8000 : iwl_nvm_channels;
	struct ieee80211_regdomain *regd;
	int size_of_regd;
	struct ieee80211_reg_rule *rule;
	enum nl80211_band band;
	int center_freq, prev_center_freq = 0;
	int valid_rules = 0;
	bool new_rule;
	int max_num_ch = cfg->device_family == IWL_DEVICE_FAMILY_8000 ?
			 IWL_NUM_CHANNELS_FAMILY_8000 : IWL_NUM_CHANNELS;

	if (WARN_ON_ONCE(num_of_ch > NL80211_MAX_SUPP_REG_RULES))
		return ERR_PTR(-EINVAL);

	if (WARN_ON(num_of_ch > max_num_ch))
		num_of_ch = max_num_ch;

	IWL_DEBUG_DEV(dev, IWL_DL_LAR, "building regdom for %d channels\n",
		      num_of_ch);

	/* build a regdomain rule for every valid channel */
	size_of_regd =
		sizeof(struct ieee80211_regdomain) +
		num_of_ch * sizeof(struct ieee80211_reg_rule);

	regd = kzalloc(size_of_regd, GFP_KERNEL);
	if (!regd)
		return ERR_PTR(-ENOMEM);

	for (ch_idx = 0; ch_idx < num_of_ch; ch_idx++) {
		ch_flags = (u16)__le32_to_cpup(channels + ch_idx);
		band = (ch_idx < NUM_2GHZ_CHANNELS) ?
		       NL80211_BAND_2GHZ : NL80211_BAND_5GHZ;
		center_freq = ieee80211_channel_to_frequency(nvm_chan[ch_idx],
							     band);
		new_rule = false;

		if (!(ch_flags & NVM_CHANNEL_VALID)) {
			IWL_DEBUG_DEV(dev, IWL_DL_LAR,
				      "Ch. %d Flags %x [%sGHz] - No traffic\n",
				      nvm_chan[ch_idx],
				      ch_flags,
				      (ch_idx >= NUM_2GHZ_CHANNELS) ?
				      "5.2" : "2.4");
			continue;
		}

		/* we can't continue the same rule */
		if (ch_idx == 0 || prev_ch_flags != ch_flags ||
		    center_freq - prev_center_freq > 20) {
			valid_rules++;
			new_rule = true;
		}

		rule = &regd->reg_rules[valid_rules - 1];

		if (new_rule)
			rule->freq_range.start_freq_khz =
						MHZ_TO_KHZ(center_freq - 10);

		rule->freq_range.end_freq_khz = MHZ_TO_KHZ(center_freq + 10);

		/* this doesn't matter - not used by FW */
		rule->power_rule.max_antenna_gain = DBI_TO_MBI(6);
		rule->power_rule.max_eirp =
			DBM_TO_MBM(IWL_DEFAULT_MAX_TX_POWER);

		rule->flags = iwl_nvm_get_regdom_bw_flags(nvm_chan, ch_idx,
							  ch_flags, cfg);

		/* rely on auto-calculation to merge BW of contiguous chans */
		rule->flags |= NL80211_RRF_AUTO_BW;
		rule->freq_range.max_bandwidth_khz = 0;

		prev_ch_flags = ch_flags;
		prev_center_freq = center_freq;

		IWL_DEBUG_DEV(dev, IWL_DL_LAR,
			      "Ch. %d [%sGHz] %s%s%s%s%s%s%s%s%s(0x%02x): Ad-Hoc %ssupported\n",
			      center_freq,
			      band == NL80211_BAND_5GHZ ? "5.2" : "2.4",
			      CHECK_AND_PRINT_I(VALID),
			      CHECK_AND_PRINT_I(ACTIVE),
			      CHECK_AND_PRINT_I(RADAR),
			      CHECK_AND_PRINT_I(WIDE),
			      CHECK_AND_PRINT_I(40MHZ),
			      CHECK_AND_PRINT_I(80MHZ),
			      CHECK_AND_PRINT_I(160MHZ),
			      CHECK_AND_PRINT_I(INDOOR_ONLY),
			      CHECK_AND_PRINT_I(GO_CONCURRENT),
			      ch_flags,
			      ((ch_flags & NVM_CHANNEL_ACTIVE) &&
			       !(ch_flags & NVM_CHANNEL_RADAR))
					 ? "" : "not ");
	}

	regd->n_reg_rules = valid_rules;

	/* set alpha2 from FW. */
	regd->alpha2[0] = fw_mcc >> 8;
	regd->alpha2[1] = fw_mcc & 0xff;

	return regd;
}
Ejemplo n.º 2
0
static int iwl_init_channel_map(struct device *dev, const struct iwl_cfg *cfg,
				struct iwl_nvm_data *data,
				const __le16 * const nvm_ch_flags,
				bool lar_supported)
{
	int ch_idx;
	int n_channels = 0;
	struct ieee80211_channel *channel;
	u16 ch_flags;
	bool is_5ghz;
	int num_of_ch, num_2ghz_channels;
	const u8 *nvm_chan;

	if (cfg->device_family != IWL_DEVICE_FAMILY_8000) {
		num_of_ch = IWL_NUM_CHANNELS;
		nvm_chan = &iwl_nvm_channels[0];
		num_2ghz_channels = NUM_2GHZ_CHANNELS;
	} else {
		num_of_ch = IWL_NUM_CHANNELS_FAMILY_8000;
		nvm_chan = &iwl_nvm_channels_family_8000[0];
		num_2ghz_channels = NUM_2GHZ_CHANNELS_FAMILY_8000;
	}

	for (ch_idx = 0; ch_idx < num_of_ch; ch_idx++) {
		ch_flags = __le16_to_cpup(nvm_ch_flags + ch_idx);

		if (ch_idx >= num_2ghz_channels &&
		    !data->sku_cap_band_52GHz_enable)
			continue;

		if (ch_flags & NVM_CHANNEL_160MHZ)
			data->vht160_supported = true;

		if (!lar_supported && !(ch_flags & NVM_CHANNEL_VALID)) {
			/*
			 * Channels might become valid later if lar is
			 * supported, hence we still want to add them to
			 * the list of supported channels to cfg80211.
			 */
			IWL_DEBUG_EEPROM(dev,
					 "Ch. %d Flags %x [%sGHz] - No traffic\n",
					 nvm_chan[ch_idx],
					 ch_flags,
					 (ch_idx >= num_2ghz_channels) ?
					 "5.2" : "2.4");
			continue;
		}

		channel = &data->channels[n_channels];
		n_channels++;

		channel->hw_value = nvm_chan[ch_idx];
		channel->band = (ch_idx < num_2ghz_channels) ?
				NL80211_BAND_2GHZ : NL80211_BAND_5GHZ;
		channel->center_freq =
			ieee80211_channel_to_frequency(
				channel->hw_value, channel->band);

		/* Initialize regulatory-based run-time data */

		/*
		 * Default value - highest tx power value.  max_power
		 * is not used in mvm, and is used for backwards compatibility
		 */
		channel->max_power = IWL_DEFAULT_MAX_TX_POWER;
		is_5ghz = channel->band == NL80211_BAND_5GHZ;

		/* don't put limitations in case we're using LAR */
		if (!lar_supported)
			channel->flags = iwl_get_channel_flags(nvm_chan[ch_idx],
							       ch_idx, is_5ghz,
							       ch_flags, cfg);
		else
			channel->flags = 0;

		IWL_DEBUG_EEPROM(dev,
				 "Ch. %d [%sGHz] flags 0x%x %s%s%s%s%s%s%s%s%s%s(%ddBm): Ad-Hoc %ssupported\n",
				 channel->hw_value,
				 is_5ghz ? "5.2" : "2.4",
				 ch_flags,
				 CHECK_AND_PRINT_I(VALID),
				 CHECK_AND_PRINT_I(IBSS),
				 CHECK_AND_PRINT_I(ACTIVE),
				 CHECK_AND_PRINT_I(RADAR),
				 CHECK_AND_PRINT_I(INDOOR_ONLY),
				 CHECK_AND_PRINT_I(GO_CONCURRENT),
				 CHECK_AND_PRINT_I(WIDE),
				 CHECK_AND_PRINT_I(40MHZ),
				 CHECK_AND_PRINT_I(80MHZ),
				 CHECK_AND_PRINT_I(160MHZ),
				 channel->max_power,
				 ((ch_flags & NVM_CHANNEL_IBSS) &&
				  !(ch_flags & NVM_CHANNEL_RADAR))
					? "" : "not ");
	}

	return n_channels;
}
Ejemplo n.º 3
0
/**
 * iwl_init_channel_map - Set up driver's info for all possible channels
 */
int iwl_init_channel_map(struct iwl_priv *priv)
{
	int eeprom_ch_count = 0;
	const u8 *eeprom_ch_index = NULL;
	const struct iwl_eeprom_channel *eeprom_ch_info = NULL;
	int band, ch;
	struct iwl_channel_info *ch_info;

	if (priv->channel_count) {
		IWL_DEBUG_INFO(priv, "Channel map already initialized.\n");
		return 0;
	}

	IWL_DEBUG_INFO(priv, "Initializing regulatory info from EEPROM\n");

	priv->channel_count =
	    ARRAY_SIZE(iwl_eeprom_band_1) +
	    ARRAY_SIZE(iwl_eeprom_band_2) +
	    ARRAY_SIZE(iwl_eeprom_band_3) +
	    ARRAY_SIZE(iwl_eeprom_band_4) +
	    ARRAY_SIZE(iwl_eeprom_band_5);

	IWL_DEBUG_INFO(priv, "Parsing data for %d channels.\n", priv->channel_count);

	priv->channel_info = kzalloc(sizeof(struct iwl_channel_info) *
				     priv->channel_count, GFP_KERNEL);
	if (!priv->channel_info) {
		IWL_ERR(priv, "Could not allocate channel_info\n");
		priv->channel_count = 0;
		return -ENOMEM;
	}

	ch_info = priv->channel_info;

	/* Loop through the 5 EEPROM bands adding them in order to the
	 * channel map we maintain (that contains additional information than
	 * what just in the EEPROM) */
	for (band = 1; band <= 5; band++) {

		iwl_init_band_reference(priv, band, &eeprom_ch_count,
					&eeprom_ch_info, &eeprom_ch_index);

		/* Loop through each band adding each of the channels */
		for (ch = 0; ch < eeprom_ch_count; ch++) {
			ch_info->channel = eeprom_ch_index[ch];
			ch_info->band = (band == 1) ? IEEE80211_BAND_2GHZ :
			    IEEE80211_BAND_5GHZ;

			/* permanently store EEPROM's channel regulatory flags
			 *   and max power in channel info database. */
			ch_info->eeprom = eeprom_ch_info[ch];

			/* Copy the run-time flags so they are there even on
			 * invalid channels */
			ch_info->flags = eeprom_ch_info[ch].flags;
			/* First write that fat is not enabled, and then enable
			 * one by one */
			ch_info->fat_extension_channel =
				(IEEE80211_CHAN_NO_HT40PLUS |
				 IEEE80211_CHAN_NO_HT40MINUS);

			if (!(is_channel_valid(ch_info))) {
				IWL_DEBUG_INFO(priv, "Ch. %d Flags %x [%sGHz] - "
					       "No traffic\n",
					       ch_info->channel,
					       ch_info->flags,
					       is_channel_a_band(ch_info) ?
					       "5.2" : "2.4");
				ch_info++;
				continue;
			}

			/* Initialize regulatory-based run-time data */
			ch_info->max_power_avg = ch_info->curr_txpow =
			    eeprom_ch_info[ch].max_power_avg;
			ch_info->scan_power = eeprom_ch_info[ch].max_power_avg;
			ch_info->min_power = 0;

			IWL_DEBUG_INFO(priv, "Ch. %d [%sGHz] %s%s%s%s%s%s(0x%02x %ddBm):"
				       " Ad-Hoc %ssupported\n",
				       ch_info->channel,
				       is_channel_a_band(ch_info) ?
				       "5.2" : "2.4",
				       CHECK_AND_PRINT_I(VALID),
				       CHECK_AND_PRINT_I(IBSS),
				       CHECK_AND_PRINT_I(ACTIVE),
				       CHECK_AND_PRINT_I(RADAR),
				       CHECK_AND_PRINT_I(WIDE),
				       CHECK_AND_PRINT_I(DFS),
				       eeprom_ch_info[ch].flags,
				       eeprom_ch_info[ch].max_power_avg,
				       ((eeprom_ch_info[ch].
					 flags & EEPROM_CHANNEL_IBSS)
					&& !(eeprom_ch_info[ch].
					     flags & EEPROM_CHANNEL_RADAR))
				       ? "" : "not ");

			/* Set the tx_power_user_lmt to the highest power
			 * supported by any channel */
			if (eeprom_ch_info[ch].max_power_avg >
						priv->tx_power_user_lmt)
				priv->tx_power_user_lmt =
				    eeprom_ch_info[ch].max_power_avg;

			ch_info++;
		}
	}

	/* Check if we do have FAT channels */
	if (priv->cfg->ops->lib->eeprom_ops.regulatory_bands[5] ==
	    EEPROM_REGULATORY_BAND_NO_FAT &&
	    priv->cfg->ops->lib->eeprom_ops.regulatory_bands[6] ==
	    EEPROM_REGULATORY_BAND_NO_FAT)
		return 0;

	/* Two additional EEPROM bands for 2.4 and 5 GHz FAT channels */
	for (band = 6; band <= 7; band++) {
		enum ieee80211_band ieeeband;
		u8 fat_extension_chan;

		iwl_init_band_reference(priv, band, &eeprom_ch_count,
					&eeprom_ch_info, &eeprom_ch_index);

		/* EEPROM band 6 is 2.4, band 7 is 5 GHz */
		ieeeband =
			(band == 6) ? IEEE80211_BAND_2GHZ : IEEE80211_BAND_5GHZ;

		/* Loop through each band adding each of the channels */
		for (ch = 0; ch < eeprom_ch_count; ch++) {

			if ((band == 6) &&
				((eeprom_ch_index[ch] == 5) ||
				 (eeprom_ch_index[ch] == 6) ||
				 (eeprom_ch_index[ch] == 7)))
				/* both are allowed: above and below */
				fat_extension_chan = 0;
			else
				fat_extension_chan =
					IEEE80211_CHAN_NO_HT40MINUS;

			/* Set up driver's info for lower half */
			iwl_set_fat_chan_info(priv, ieeeband,
						eeprom_ch_index[ch],
						&(eeprom_ch_info[ch]),
						fat_extension_chan);

			/* Set up driver's info for upper half */
			iwl_set_fat_chan_info(priv, ieeeband,
						(eeprom_ch_index[ch] + 4),
						&(eeprom_ch_info[ch]),
						IEEE80211_CHAN_NO_HT40PLUS);
		}
	}

	return 0;
}
Ejemplo n.º 4
0
static int iwl_init_channel_map(struct device *dev, const struct iwl_cfg *cfg,
				struct iwl_nvm_data *data,
				const __le16 * const nvm_ch_flags)
{
	int ch_idx;
	int n_channels = 0;
	struct ieee80211_channel *channel;
	u16 ch_flags;
	bool is_5ghz;
	int num_of_ch, num_2ghz_channels;
	const u8 *nvm_chan;

	if (cfg->device_family != IWL_DEVICE_FAMILY_8000) {
		num_of_ch = IWL_NUM_CHANNELS;
		nvm_chan = &iwl_nvm_channels[0];
		num_2ghz_channels = NUM_2GHZ_CHANNELS;
	} else {
		num_of_ch = IWL_NUM_CHANNELS_FAMILY_8000;
		nvm_chan = &iwl_nvm_channels_family_8000[0];
		num_2ghz_channels = NUM_2GHZ_CHANNELS_FAMILY_8000;
	}

	for (ch_idx = 0; ch_idx < num_of_ch; ch_idx++) {
		ch_flags = __le16_to_cpup(nvm_ch_flags + ch_idx);

		if (ch_idx >= num_2ghz_channels &&
		    !data->sku_cap_band_52GHz_enable)
			ch_flags &= ~NVM_CHANNEL_VALID;

		if (!(ch_flags & NVM_CHANNEL_VALID)) {
			IWL_DEBUG_EEPROM(dev,
					 "Ch. %d Flags %x [%sGHz] - No traffic\n",
					 nvm_chan[ch_idx],
					 ch_flags,
					 (ch_idx >= num_2ghz_channels) ?
					 "5.2" : "2.4");
			continue;
		}

		channel = &data->channels[n_channels];
		n_channels++;

		channel->hw_value = nvm_chan[ch_idx];
		channel->band = (ch_idx < num_2ghz_channels) ?
				IEEE80211_BAND_2GHZ : IEEE80211_BAND_5GHZ;
		channel->center_freq =
			ieee80211_channel_to_frequency(
				channel->hw_value, channel->band);

		/* TODO: Need to be dependent to the NVM */
		channel->flags = IEEE80211_CHAN_NO_HT40;
		if (ch_idx < num_2ghz_channels &&
		    (ch_flags & NVM_CHANNEL_40MHZ)) {
			if (nvm_chan[ch_idx] <= LAST_2GHZ_HT_PLUS)
				channel->flags &= ~IEEE80211_CHAN_NO_HT40PLUS;
			if (nvm_chan[ch_idx] >= FIRST_2GHZ_HT_MINUS)
				channel->flags &= ~IEEE80211_CHAN_NO_HT40MINUS;
		} else if (nvm_chan[ch_idx] <= LAST_5GHZ_HT &&
			   (ch_flags & NVM_CHANNEL_40MHZ)) {
			if ((ch_idx - num_2ghz_channels) % 2 == 0)
				channel->flags &= ~IEEE80211_CHAN_NO_HT40PLUS;
			else
				channel->flags &= ~IEEE80211_CHAN_NO_HT40MINUS;
		}
		if (!(ch_flags & NVM_CHANNEL_80MHZ))
			channel->flags |= IEEE80211_CHAN_NO_80MHZ;
		if (!(ch_flags & NVM_CHANNEL_160MHZ))
			channel->flags |= IEEE80211_CHAN_NO_160MHZ;

		if (!(ch_flags & NVM_CHANNEL_IBSS))
			channel->flags |= IEEE80211_CHAN_NO_IR;

		if (!(ch_flags & NVM_CHANNEL_ACTIVE))
			channel->flags |= IEEE80211_CHAN_NO_IR;

		if (ch_flags & NVM_CHANNEL_RADAR)
			channel->flags |= IEEE80211_CHAN_RADAR;

		/* Initialize regulatory-based run-time data */

		/*
		 * Default value - highest tx power value.  max_power
		 * is not used in mvm, and is used for backwards compatibility
		 */
		channel->max_power = DEFAULT_MAX_TX_POWER;
		is_5ghz = channel->band == IEEE80211_BAND_5GHZ;
		IWL_DEBUG_EEPROM(dev,
				 "Ch. %d [%sGHz] %s%s%s%s%s%s(0x%02x %ddBm): Ad-Hoc %ssupported\n",
				 channel->hw_value,
				 is_5ghz ? "5.2" : "2.4",
				 CHECK_AND_PRINT_I(VALID),
				 CHECK_AND_PRINT_I(IBSS),
				 CHECK_AND_PRINT_I(ACTIVE),
				 CHECK_AND_PRINT_I(RADAR),
				 CHECK_AND_PRINT_I(WIDE),
				 CHECK_AND_PRINT_I(DFS),
				 ch_flags,
				 channel->max_power,
				 ((ch_flags & NVM_CHANNEL_IBSS) &&
				  !(ch_flags & NVM_CHANNEL_RADAR))
					? "" : "not ");
	}

	return n_channels;
}
Ejemplo n.º 5
0
static int iwl_init_channel_map(struct device *dev, const struct iwl_cfg *cfg,
				struct iwl_nvm_data *data,
				const __le16 * const nvm_ch_flags)
{
	int ch_idx;
	int n_channels = 0;
	struct ieee80211_channel *channel;
	u16 ch_flags;
	bool is_5ghz;

	for (ch_idx = 0; ch_idx < IWL_NUM_CHANNELS; ch_idx++) {
		ch_flags = __le16_to_cpup(nvm_ch_flags + ch_idx);
		if (!(ch_flags & NVM_CHANNEL_VALID)) {
			IWL_DEBUG_EEPROM(dev,
					 "Ch. %d Flags %x [%sGHz] - No traffic\n",
					 iwl_nvm_channels[ch_idx],
					 ch_flags,
					 (ch_idx >= NUM_2GHZ_CHANNELS) ?
					 "5.2" : "2.4");
			continue;
		}

		channel = &data->channels[n_channels];
		n_channels++;

		channel->hw_value = iwl_nvm_channels[ch_idx];
		channel->band = (ch_idx < NUM_2GHZ_CHANNELS) ?
				IEEE80211_BAND_2GHZ : IEEE80211_BAND_5GHZ;
		channel->center_freq =
			ieee80211_channel_to_frequency(
				channel->hw_value, channel->band);

		/* TODO: Need to be dependent to the NVM */
		channel->flags = IEEE80211_CHAN_NO_HT40;
		if (ch_idx < NUM_2GHZ_CHANNELS &&
		    (ch_flags & NVM_CHANNEL_40MHZ)) {
			if (iwl_nvm_channels[ch_idx] <= LAST_2GHZ_HT_PLUS)
				channel->flags &= ~IEEE80211_CHAN_NO_HT40PLUS;
			if (iwl_nvm_channels[ch_idx] >= FIRST_2GHZ_HT_MINUS)
				channel->flags &= ~IEEE80211_CHAN_NO_HT40MINUS;
		} else if (iwl_nvm_channels[ch_idx] <= LAST_5GHZ_HT &&
			   (ch_flags & NVM_CHANNEL_40MHZ)) {
			if ((ch_idx - NUM_2GHZ_CHANNELS) % 2 == 0)
				channel->flags &= ~IEEE80211_CHAN_NO_HT40PLUS;
			else
				channel->flags &= ~IEEE80211_CHAN_NO_HT40MINUS;
		}
		if (!(ch_flags & NVM_CHANNEL_80MHZ))
			channel->flags |= IEEE80211_CHAN_NO_80MHZ;
		if (!(ch_flags & NVM_CHANNEL_160MHZ))
			channel->flags |= IEEE80211_CHAN_NO_160MHZ;

		if (!(ch_flags & NVM_CHANNEL_IBSS))
			channel->flags |= IEEE80211_CHAN_NO_IBSS;

		if (!(ch_flags & NVM_CHANNEL_ACTIVE))
			channel->flags |= IEEE80211_CHAN_PASSIVE_SCAN;

		if (ch_flags & NVM_CHANNEL_RADAR)
			channel->flags |= IEEE80211_CHAN_RADAR;

		/* Initialize regulatory-based run-time data */

		/* TODO: read the real value from the NVM */
		channel->max_power = 0;
		is_5ghz = channel->band == IEEE80211_BAND_5GHZ;
		IWL_DEBUG_EEPROM(dev,
				 "Ch. %d [%sGHz] %s%s%s%s%s%s(0x%02x %ddBm): Ad-Hoc %ssupported\n",
				 channel->hw_value,
				 is_5ghz ? "5.2" : "2.4",
				 CHECK_AND_PRINT_I(VALID),
				 CHECK_AND_PRINT_I(IBSS),
				 CHECK_AND_PRINT_I(ACTIVE),
				 CHECK_AND_PRINT_I(RADAR),
				 CHECK_AND_PRINT_I(WIDE),
				 CHECK_AND_PRINT_I(DFS),
				 ch_flags,
				 channel->max_power,
				 ((ch_flags & NVM_CHANNEL_IBSS) &&
				  !(ch_flags & NVM_CHANNEL_RADAR))
					? "" : "not ");
	}

	return n_channels;
}
Ejemplo n.º 6
0
static inline void iwl_nvm_print_channel_flags(struct device *dev, u32 level,
					       int chan, u32 flags)
{
#define CHECK_AND_PRINT_I(x)	\
	((flags & NVM_CHANNEL_##x) ? " " #x : "")

	if (!(flags & NVM_CHANNEL_VALID)) {
		IWL_DEBUG_DEV(dev, level, "Ch. %d: 0x%x: No traffic\n",
			      chan, flags);
		return;
	}

	/* Note: already can print up to 101 characters, 110 is the limit! */
	IWL_DEBUG_DEV(dev, level,
		      "Ch. %d: 0x%x:%s%s%s%s%s%s%s%s%s%s%s%s\n",
		      chan, flags,
		      CHECK_AND_PRINT_I(VALID),
		      CHECK_AND_PRINT_I(IBSS),
		      CHECK_AND_PRINT_I(ACTIVE),
		      CHECK_AND_PRINT_I(RADAR),
		      CHECK_AND_PRINT_I(INDOOR_ONLY),
		      CHECK_AND_PRINT_I(GO_CONCURRENT),
		      CHECK_AND_PRINT_I(UNIFORM),
		      CHECK_AND_PRINT_I(20MHZ),
		      CHECK_AND_PRINT_I(40MHZ),
		      CHECK_AND_PRINT_I(80MHZ),
		      CHECK_AND_PRINT_I(160MHZ),
		      CHECK_AND_PRINT_I(DC_HIGH));
#undef CHECK_AND_PRINT_I
}