////////////////////////////////////////////////////////////////////////////
///
/// Update the prediction after consuming data.
///
/// \param Adjustment Number of bytes to adjust the prediciton by, this is
/// expected to be negative.
///
void Collator_PesAudioDvd_c::AdjustDvdSyncWordPredictionAfterConsumingData(int Adjustment)
{
if (Adjustment > 0)
COLLATOR_ERROR("Probably implementation error - positive adjustment requested (%d)\n",
Adjustment);
if (-Adjustment > SyncWordPrediction)
SyncWordPrediction = INVALID_PREDICTION;
if (SyncWordPrediction != WILDCARD_PREDICTION && SyncWordPrediction != INVALID_PREDICTION)
{
COLLATOR_DEBUG("Adjusting prediction from %d to %d\n",
SyncWordPrediction, SyncWordPrediction + Adjustment);
SyncWordPrediction += Adjustment;
}
else
COLLATOR_DEBUG("Prediciton is %s - no adjustment made\n",
(SyncWordPrediction == WILDCARD_PREDICTION ? "wildcarded" : "invalid"));
}
////////////////////////////////////////////////////////////////////////////
///
/// Accumulate incoming data until we have the full PES header.
///
/// Strictly speaking this method handles two sub-states. In the first state
/// we do not have sufficient data accumulated to determine how long the PES
/// header is. In the second we still don't have a complete PES packet but
/// at least we know how much more data we need.
///
/// This code assumes that PES packet uses >=9 bytes PES headers rather than
/// the 6 byte headers found in the program stream map, padding stream,
/// private stream 2, etc.
///
/// \return Collator status code, CollatorNoError indicates success.
///
CollatorStatus_t Collator_PesAudio_c::ReadPartialPesHeader(void)
{
CollatorStatus_t Status;
unsigned int PesHeaderBytes, BytesNeeded, BytesToRead;
unsigned char PesPrivateData[MAX_PES_PRIVATE_DATA_LENGTH];
//
if (GotPartialPesHeaderBytes < PES_INITIAL_HEADER_SIZE)
{
COLLATOR_DEBUG("Waiting for first part of PES header\n");
StoredPesHeader = BufferBase + AccumulatedDataSize - GotPartialPesHeaderBytes;
BytesToRead = min(RemainingLength, PES_INITIAL_HEADER_SIZE - GotPartialPesHeaderBytes);
Status = AccumulateData(BytesToRead, RemainingData);
if (Status == CollatorNoError)
{
GotPartialPesHeaderBytes += BytesToRead;
RemainingData += BytesToRead;
RemainingLength -= BytesToRead;
}
else
{
COLLATOR_DEBUG("Cannot accumulate data #6 (%d)\n", Status);
}
return Status;
}
//
// We now have accumulated sufficient data to know how long the PES header actually is!
//
// pass the stream_id field to the collator sub-class (might update Configuration.ExtendedHeaderLength)
SetPesPrivateDataLength(StoredPesHeader[3]);
PesHeaderBytes = PES_INITIAL_HEADER_SIZE + StoredPesHeader[8] + Configuration.ExtendedHeaderLength;
BytesNeeded = PesHeaderBytes - GotPartialPesHeaderBytes;
BytesToRead = min(RemainingLength, BytesNeeded);
Status = AccumulateData(BytesToRead, RemainingData);
if (Status == CollatorNoError)
{
GotPartialPesHeaderBytes += BytesToRead;
RemainingData += BytesToRead;
RemainingLength -= BytesToRead;
COLLATOR_DEBUG("BytesNeeded %d; BytesToRead %d\n", BytesNeeded, BytesToRead);
if (BytesNeeded == BytesToRead)
{
//
// Woo hoo! We've got the whole header, examine it and change state
//
COLLATOR_DEBUG("Got entire PES header\n");
//report_dump_hex( severity_note, StoredPesHeader, PesHeaderBytes, 32, 0);
Status = CollatorNoError; // strictly speaking this is a no-op but the code might change
if (StoredPesHeader[0] != 0x00 || StoredPesHeader[1] != 0x00 || StoredPesHeader[2] != 0x01 ||
CollatorNoError != (Status = ReadPesHeader()))
{
COLLATOR_DEBUG("%s; seeking new PES header",
(Status == CollatorNoError ? "Start code not where expected" :
"Badly formed PES header"));
SeekingPesHeader = true;
DiscardAccumulatedData();
// we have contained the error by changing states...
return CollatorNoError;
}
//
// Placeholder: Generic stream id based PES filtering (configured by sub-class) could be inserted
// here (set DiscardPesPacket to true to discard).
//
if (Configuration.ExtendedHeaderLength)
{
// store a pointer to the PES private header. it is located just above the end of the
// accumulated data and is will be safely accumulated providing the private header is
// smaller than the rest of the PES packet. if a very large PES private header is
// encountered we will need to introduce a temporary buffer to store the header in.
if (Configuration.ExtendedHeaderLength <= MAX_PES_PRIVATE_DATA_LENGTH)
{
memcpy(PesPrivateData, BufferBase + AccumulatedDataSize - Configuration.ExtendedHeaderLength, Configuration.ExtendedHeaderLength);
}
else
{
COLLATOR_ERROR("Implementation error: Pes Private data area too big for temporay buffer\n");
}
Status = HandlePesPrivateData(PesPrivateData);
if (Status != CollatorNoError)
{
COLLATOR_ERROR("Unhandled error when parsing PES private data\n");
return (Status);
}
}
// discard the actual PES packet from the accumulate buffer
AccumulatedDataSize -= PesHeaderBytes;
// record the number of bytes we need to ignore before we reach the next start code
PesPayloadRemaining = PesPayloadLength;
// switch states and absorb the packet
COLLATOR_DEBUG("Discovered PES packet (header %d bytes, payload %d bytes)\n",
PesPacketLength - PesPayloadLength + 6, PesPayloadLength);
GotPartialPesHeader = false;
if (PassPesPrivateDataToElementaryStreamHandler && Configuration.ExtendedHeaderLength)
{
// update PesPacketLength (to ensure that GetOffsetIntoPacket gives the correct value)
PesPayloadLength += Configuration.ExtendedHeaderLength;
Status = HandleElementaryStream(Configuration.ExtendedHeaderLength, PesPrivateData);
if (Status != CollatorNoError)
{
COLLATOR_ERROR("Failed not accumulate the PES private data area\n");
}
}
}
}
else
{
COLLATOR_DEBUG("Cannot accumulate data #7 (%d)\n", Status);
}
return Status;
}
////////////////////////////////////////////////////////////////////////////
///
/// Scan the input until an appropriate PES start code is found.
///
/// Scans any Collator_Pes_c::RemainingData searching for a PES start code.
/// The configuration for this comes from Collator_Base_c::Configuration and
/// is this means that only the interesting (e.g. PES audio packets) start
/// codes will be detected.
///
/// \return Collator status code, CollatorNoError indicates success.
///
CollatorStatus_t Collator_PesAudio_c::SearchForPesHeader(void)
{
CollatorStatus_t Status;
unsigned int CodeOffset;
//
//
// If there are any trailing start codes handle those.
//
while (TrailingStartCodeBytes && RemainingLength)
{
if (TrailingStartCodeBytes == 3)
{
// We've got the 0, 0, 1 so if the code is *not* in the ignore range then we've got one
unsigned char SpecificCode = RemainingData[0];
if (!inrange(SpecificCode, Configuration.IgnoreCodesRangeStart,
Configuration.IgnoreCodesRangeEnd))
{
COLLATOR_DEBUG("Found a trailing startcode 00, 00, 01, %x\n", SpecificCode);
// Consume the specific start code
RemainingData++;
RemainingLength--;
// Switch state (and reflect the data we are about to accumulate)
SeekingPesHeader = false;
GotPartialPesHeader = true;
//assert( AccumulatedDataSize == 0 );
GotPartialPesHeaderBytes = 4;
// There are now no trailing start code bytes
TrailingStartCodeBytes = 0;
// Finally, accumulate the data (by reconstructing it)
unsigned char StartCode[4] = { 0, 0, 1, SpecificCode };
Status = AccumulateData(4, StartCode);
if (Status != CollatorNoError)
COLLATOR_DEBUG("Cannot accumulate data #5 (%d)\n", Status);
return Status;
}
// Nope, that's not a suitable start code.
COLLATOR_DEBUG("Trailing start code 00, 00, 01, %x was in the ignore range\n", SpecificCode);
TrailingStartCodeBytes = 0;
break;
}
else if (TrailingStartCodeBytes == 2)
{
// Got two zeros, a one gets us ready to read the code.
if (RemainingData[0] == 1)
{
COLLATOR_DEBUG("Trailing start code looks good (found 00, 00; got 01)\n");
TrailingStartCodeBytes++;
RemainingData++;
RemainingLength--;
continue;
}
// Got two zeros, another zero still leaves us with two zeros.
if (RemainingData[0] == 0)
{
COLLATOR_DEBUG("Trailing start code looks OK (found 00, 00; got 00)\n");
RemainingData++;
RemainingLength--;
continue;
}
// Nope, that's not a suitable start code.
COLLATOR_DEBUG("Trailing 00, 00 was not part of a start code\n");
TrailingStartCodeBytes = 0;
break;
}
else if (TrailingStartCodeBytes == 1)
{
// Got one zero, another zero gives us two (duh).
if (RemainingData[0] == 0)
{
COLLATOR_DEBUG("Trailing start code looks good (found 00; got 00)\n");
RemainingData++;
RemainingLength--;
continue;
}
// Nope, that's not a suitable start code.
COLLATOR_DEBUG("Trailing 00 was not part of a start code\n");
TrailingStartCodeBytes = 0;
break;
}
else
{
COLLATOR_ERROR("TrailingStartCodeBytes has illegal value: %d\n", TrailingStartCodeBytes);
TrailingStartCodeBytes = 0;
return CollatorError;
}
}
if (RemainingLength == 0)
{
return CollatorNoError;
}
//assert(TrailingStartCodeBytes == 0);
//
Status = FindNextStartCode(&CodeOffset);
if (Status == CollatorNoError)
{
COLLATOR_DEBUG("Locked to PES packet boundaries\n");
// discard any data leading up to the start code
RemainingData += CodeOffset;
RemainingLength -= CodeOffset;
// switch state
SeekingPesHeader = false;
GotPartialPesHeader = true;
GotPartialPesHeaderBytes = 0;
}
else
{
// examine the end of the buffer to determine if there is a (potential) trailing start code
//assert( RemainingLength >= 1 );
if (RemainingData[RemainingLength - 1] < 1)
{
unsigned char LastBytes[3];
LastBytes[0] = (RemainingLength >= 3 ? RemainingData[RemainingLength - 3] : 0xff);
LastBytes[1] = (RemainingLength >= 2 ? RemainingData[RemainingLength - 2] : 0xff);
LastBytes[2] = RemainingData[RemainingLength - 1];
if (LastBytes[0] == 0 && LastBytes[1] == 0 && LastBytes[2] == 1)
{
TrailingStartCodeBytes = 3;
}
else if (LastBytes[1] == 0 && LastBytes[2] == 0)
{
TrailingStartCodeBytes = 2;
}
else if (LastBytes[2] == 0)
{
TrailingStartCodeBytes = 1;
}
}
COLLATOR_DEBUG("Discarded %d bytes while searching for PES header (%d might be start code)\n",
RemainingLength, TrailingStartCodeBytes);
RemainingLength = 0;
}
//
return CollatorNoError;
}
////////////////////////////////////////////////////////////////////////////
///
/// Handle losing lock on the frame headers.
///
/// This function is called to handle the data that was spuriously accumulated
/// when the frame header was badly parsed.
///
/// In principle this function is quite simple. We allocate a new accumulation buffer and
/// use the currently accumulated data is the data source to run the elementary stream
/// state machine. There is however a little extra logic to get rid of recursion.
/// Specificially we change the error handling behaviour if this method is re-entered
/// so that there error is reported back to the already executing copy of the method.
///
/// \return Collator status code, CollatorNoError indicates success.
///
CollatorStatus_t Collator_PesAudio_c::HandleMissingNextFrameHeader(void)
{
CollatorStatus_t Status;
//
// Mark the collator as having lost frame lock.
// Yes! We really do want to do this before the re-entry checks.
//
CollatorState = SeekingSyncWord; // we really do want to do this before the re-entry checks
AccumulatedFrameReady = false;
//
// Check for re-entry
//
if (AlreadyHandlingMissingNextFrameHeader)
{
COLLATOR_DEBUG("Re-entered the error recovery handler, initiating stack unwind\n");
return CollatorUnwindStack;
}
//
// Check whether the sub-class wants trivial or aggressive error recovery
//
if (!ReprocessAccumulatedDataDuringErrorRecovery)
{
DiscardAccumulatedData();
return CollatorNoError;
}
//
// Remember the original elementary stream pointers for when we return to 'normal' processing.
//
unsigned char *OldRemainingElementaryOrigin = RemainingElementaryOrigin;
unsigned char *OldRemainingElementaryData = RemainingElementaryData;
unsigned int OldRemainingElementaryLength = RemainingElementaryLength;
//
// Take ownership of the already accumulated data
//
Buffer_t ReprocessingDataBuffer = CodedFrameBuffer;
unsigned char *ReprocessingData = BufferBase;
unsigned int ReprocessingDataLength = AccumulatedDataSize;
ReprocessingDataBuffer->SetUsedDataSize(ReprocessingDataLength);
Status = ReprocessingDataBuffer->ShrinkBuffer(max(ReprocessingDataLength, 1));
if (Status != BufferNoError)
{
COLLATOR_ERROR("Failed to shrink the reprocessing buffer to size (%08x).\n", Status);
// not fatal - we're merely wasting memory
}
// At the time of writing GetNewBuffer() doesn't check for leaks. This is good because otherwise
// we wouldn't have transfer the ownership of the ReprocessingDataBuffer by making this call.
Status = GetNewBuffer();
if (Status != CollatorNoError)
{
COLLATOR_ERROR("Cannot get new buffer during error recovery\n");
return CollatorError;
}
//
// Remember that we are re-processing the previously accumulated elementary stream
//
AlreadyHandlingMissingNextFrameHeader = true;
//
// WARNING: From this point on we own the ReprocessingDataBuffer, have set the recursion avoidance
// marker and may have damaged the RemainingElementaryData pointer. There should be no
// short-circuit exit paths used after this point otherwise we risk avoiding the clean up
// at the bottom of the method.
//
while (ReprocessingDataLength > 1)
{
//
// Remove the first byte from the recovery buffer (to avoid detecting again the same start code).
//
ReprocessingData += 1;
ReprocessingDataLength -= 1;
//
// Search for a start code in the reprocessing data. This allows us to throw away data that we
// know will never need reprocessing which makes the recursion avoidance code more efficient.
//
RemainingElementaryOrigin = ReprocessingData;
RemainingElementaryData = ReprocessingData;
RemainingElementaryLength = ReprocessingDataLength;
int CodeOffset;
PotentialFrameHeaderLength = 0; // ensure no (now voided) historic data is considered by sub-class
Status = FindNextSyncWord(&CodeOffset);
if (Status == CodecNoError)
{
COLLATOR_ASSERT(CodeOffset >= 0);
COLLATOR_DEBUG("Found start code during error recovery (byte %d of %d)\n",
CodeOffset, ReprocessingDataLength);
// We found a start code, snip off all preceding data
ReprocessingData += CodeOffset;
ReprocessingDataLength -= CodeOffset;
}
else
{
// We didn't find a start code, snip off everything except the last few bytes. This
// final fragment may contain a partial start code so we want to pass if through the
// elementary stream handler again.
unsigned FinalBytes = min(ReprocessingDataLength, FrameHeaderLength - 1);
COLLATOR_DEBUG("Found no start code during error recovery (processing final %d bytes of %d)\n",
ReprocessingDataLength, FinalBytes);
ReprocessingData += ReprocessingDataLength;
ReprocessingDataLength = FinalBytes;
ReprocessingData -= ReprocessingDataLength;
}
//
// Process the elementary stream
//
Status = HandleElementaryStream(ReprocessingDataLength, ReprocessingData);
if (CollatorNoError == Status)
{
COLLATOR_DEBUG("Error recovery completed, returning to normal processing\n");
// All data consumed and stored in the subsequent accumulation buffer
break; // Success will propagate when we return Status
}
else if (CollatorUnwindStack == Status)
{
COLLATOR_DEBUG("Stack unwound successfully, re-trying error recovery\n");
// We found a frame header but lost lock again... let's have another go
AccumulatedDataSize = 0; // make sure no accumulated data is carried round the loop
continue;
}
else
{
COLLATOR_ERROR("Error handling elementary stream during error recovery\n");
break; // Failure will propagate when we return Status
}
}
//
// Free the buffer we just consumed and restore the original elementary stream pointers
//
RemainingElementaryOrigin = OldRemainingElementaryOrigin;
RemainingElementaryData = OldRemainingElementaryData;
RemainingElementaryLength = OldRemainingElementaryLength;
(void) ReprocessingDataBuffer->DecrementReferenceCount(IdentifierCollator);
AlreadyHandlingMissingNextFrameHeader = false;
return Status;
}
////////////////////////////////////////////////////////////////////////////
///
/// Accumulate incoming data until we have the parseable frame header.
///
/// Accumulate data until we have ::FrameHeaderLength
/// bytes stashed away. At this point there is sufficient data accumulated
/// to determine how many bytes will pass us by before the next frame header
/// is expected.
///
/// \return Collator status code, CollatorNoError indicates success.
///
CollatorStatus_t Collator_PesAudio_c::ReadPartialFrameHeader(void)
{
CollatorStatus_t Status;
unsigned int BytesNeeded, BytesToRead, FrameLength;
CollatorState_t OldCollatorState;
//
COLLATOR_DEBUG(">><<\n");
//
BytesNeeded = FrameHeaderLength - GotPartialFrameHeaderBytes;
BytesToRead = min(RemainingElementaryLength, BytesNeeded);
Status = AccumulateData(BytesToRead, RemainingElementaryData);
if (Status == CollatorNoError)
{
GotPartialFrameHeaderBytes += BytesToRead;
RemainingElementaryData += BytesToRead;
RemainingElementaryLength -= BytesToRead;
COLLATOR_DEBUG("BytesNeeded %d; BytesToRead %d\n", BytesNeeded, BytesToRead);
if (BytesNeeded == BytesToRead)
{
//
// Woo hoo! We've got the whole header, examine it and change state
//
StoredFrameHeader = BufferBase + (AccumulatedDataSize - FrameHeaderLength);
COLLATOR_DEBUG("Got entire frame header packet\n");
//report_dump_hex( severity_note, StoredFrameHeader, FrameHeaderLength, 32, 0);
OldCollatorState = CollatorState;
Status = DecideCollatorNextStateAndGetLength(&FrameLength);
if (Status != CollatorNoError)
{
COLLATOR_DEBUG("Badly formed frame header; seeking new frame header\n");
return HandleMissingNextFrameHeader();
}
if (FrameLength == 0)
{
// The LPCM collator needs to do this in order to get a frame evicted before
// accumulating data from the PES private data area into the frame. The only
// way it can do this is by reporting a zero length frame and updating some
// internal state variables. On the next call it will report a non-zero value
// (i.e. we won't loop forever accumulating no data).
COLLATOR_DEBUG("Sub-class reported unlikely (but potentially legitimate) frame length (%d)\n", FrameLength);
}
if (FrameLength > MaximumCodedFrameSize)
{
COLLATOR_ERROR("Sub-class reported absurd frame length (%d)\n", FrameLength);
return HandleMissingNextFrameHeader();
}
// this is the number of bytes we must absorb before switching state to SeekingFrameEnd.
// if the value is negative then we've already started absorbing the subsequent frame
// header.
FramePayloadRemaining = FrameLength - FrameHeaderLength;
if (CollatorState == GotCompleteFrame)
{
AccumulatedFrameReady = true;
//
// update the coded frame parameters using the parameters calculated the
// last time we saw a frame header.
//
CodedFrameParameters->PlaybackTimeValid = NextPlaybackTimeValid;
CodedFrameParameters->PlaybackTime = NextPlaybackTime;
CodedFrameParameters->DecodeTimeValid = NextDecodeTimeValid;
CodedFrameParameters->DecodeTime = NextDecodeTime;
}
else if (CollatorState == SkipSubFrame)
{
/* discard the accumulated frame header */
AccumulatedDataSize -= FrameHeaderLength;
}
if (CollatorState == GotCompleteFrame || OldCollatorState == GotSynchronized)
{
//
// at this point we have discovered a frame header and need to attach a time to it.
// we can choose between the normal stamp (the stamp of the current PES packet) or the
// spanning stamp (the stamp of the previous PES packet). Basically if we have accumulated
// a greater number of bytes than our current offset into the PES packet then we want to
// use the spanning time.
//
bool WantSpanningTime = GetOffsetIntoPacket() < (int) GotPartialFrameHeaderBytes;
if (WantSpanningTime && !UseSpanningTime)
{
COLLATOR_ERROR("Wanted to take the spanning time but this was not available.");
WantSpanningTime = false;
}
if (WantSpanningTime)
{
NextPlaybackTimeValid = SpanningPlaybackTimeValid;
NextPlaybackTime = SpanningPlaybackTime;
SpanningPlaybackTimeValid = false;
NextDecodeTimeValid = SpanningDecodeTimeValid;
NextDecodeTime = SpanningDecodeTime;
SpanningDecodeTimeValid = false;
UseSpanningTime = false;
}
else
{
NextPlaybackTimeValid = PlaybackTimeValid;
NextPlaybackTime = PlaybackTime;
PlaybackTimeValid = false;
NextDecodeTimeValid = DecodeTimeValid;
NextDecodeTime = DecodeTime;
DecodeTimeValid = false;
}
}
// switch states and absorb the packet
COLLATOR_DEBUG("Discovered frame header (frame length %d bytes)\n", FrameLength);
}
}
else
{
COLLATOR_DEBUG("Cannot accumulate data #3 (%d)\n", Status);
}
return Status;
}
//{{{ Input
////////////////////////////////////////////////////////////////////////////
///
/// Extract Frame length from Pes Private Data area if present.
///
/// \return Collator status code, CollatorNoError indicates success.
///
CollatorStatus_t Collator_PesFrame_c::Input(PlayerInputDescriptor_t *Input,
unsigned int DataLength,
void *Data,
bool NonBlocking,
unsigned int *DataLengthRemaining)
{
CollatorStatus_t Status = CollatorNoError;
bool PrivateDataPresent;
unsigned char *DataBlock = (unsigned char *)Data;
unsigned char *PesHeader;
unsigned char *PayloadStart;
unsigned int PayloadLength;
unsigned int PesLength;
unsigned int Offset;
COLLATOR_ASSERT(!NonBlocking);
AssertComponentState("Collator_PesFrame_c::Input", ComponentRunning);
InputEntry(Input, DataLength, Data, NonBlocking);
Offset = 0;
while (Offset < DataLength)
{
// Read the length of the payload
PrivateDataPresent = false;
PesHeader = DataBlock + Offset;
PesLength = (PesHeader[4] << 8) + PesHeader[5];
if (PesLength != 0)
PayloadLength = PesLength - PesHeader[8] - 3;
else
PayloadLength = 0;
COLLATOR_DEBUG("DataLength %d, PesLength %d; PayloadLength %d, Offset %d\n", DataLength, PesLength, PayloadLength, Offset);
Offset += PesLength + 6; // PES packet is PesLength + 6 bytes long
Bits.SetPointer(PesHeader + 9); // Set bits pointer ready to process optional fields
if ((PesHeader[7] & 0x80) == 0x80) // PTS present?
//{{{ read PTS
{
Bits.FlushUnseen(4);
PlaybackTime = (unsigned long long)(Bits.Get(3)) << 30;
Bits.FlushUnseen(1);
PlaybackTime |= Bits.Get(15) << 15;
Bits.FlushUnseen(1);
PlaybackTime |= Bits.Get(15);
Bits.FlushUnseen(1);
PlaybackTimeValid = true;
COLLATOR_DEBUG("PTS %llu.\n", PlaybackTime);
}
//}}}
if ((PesHeader[7] & 0xC0) == 0xC0) // DTS present?
//{{{ read DTS
{
Bits.FlushUnseen(4);
DecodeTime = (unsigned long long)(Bits.Get(3)) << 30;
Bits.FlushUnseen(1);
DecodeTime |= Bits.Get(15) << 15;
Bits.FlushUnseen(1);
DecodeTime |= Bits.Get(15);
Bits.FlushUnseen(1);
DecodeTimeValid = true;
}
//}}}
else if ((PesHeader[7] & 0xC0) == 0x40)
{
COLLATOR_ERROR("Malformed pes header contains DTS without PTS.\n");
DiscardAccumulatedData(); // throw away previous frame as incomplete
InputExit();
return CollatorError;
}
//}}}
//{{{ walk down optional bits
if ((PesHeader[7] & 0x20) == 0x20) // ESCR present
Bits.FlushUnseen(48); // Size of ESCR
if ((PesHeader[7] & 0x10) == 0x10) // ES Rate present
Bits.FlushUnseen(24); // Size of ES Rate
if ((PesHeader[7] & 0x08) == 0x08) // Trick mode control present
Bits.FlushUnseen(8); // Size of Trick mode control
if ((PesHeader[7] & 0x04) == 0x04) // Additional copy info present
Bits.FlushUnseen(8); // Size of additional copy info
if ((PesHeader[7] & 0x02) == 0x02) // PES CRC present
Bits.FlushUnseen(16); // Size of previous packet CRC
if ((PesHeader[7] & 0x01) == 0x01) // PES Extension flag
{
PrivateDataPresent = Bits.Get(1);
Bits.FlushUnseen(7); // Size of Pes extension data
}
//}}}
if (PrivateDataPresent)
{
if (RemainingDataLength != 0)
{
COLLATOR_ERROR("%s: Warning new frame indicated but %d bytes missing\n", __FUNCTION__, RemainingDataLength);
DiscardAccumulatedData(); // throw away previous frame as incomplete
}
FrameSize = Bits.Get(8) + (Bits.Get(8) << 8) + (Bits.Get(8) << 16);
RemainingDataLength = FrameSize;
COLLATOR_DEBUG("%s: PlaybackTimeValid %d, PlaybackTime %llx, FrameSize %d\n", __FUNCTION__, PlaybackTimeValid, PlaybackTime, FrameSize);
}
if ((int)PayloadLength > RemainingDataLength) // Too much data - have some packets been lost?
{
if (RemainingDataLength != 0)
{
COLLATOR_ERROR("%s: Warning packet contains more bytes than needed %d bytes missing?\n", __FUNCTION__, RemainingDataLength);
DiscardAccumulatedData(); // throw away previous frame as incomplete
//RemainingDataLength = 0;
//InputExit();
//return CollatorError;
}
RemainingDataLength = PayloadLength; // assume new packet is stand alone frame
}
AccumulateStartCode(PackStartCode(AccumulatedDataSize, 0x42));
PayloadStart = PesHeader + (PesLength + 6 - PayloadLength);
Status = AccumulateData(PayloadLength, (unsigned char *)PayloadStart);
if (Status != CollatorNoError)
{
InputExit();
return Status;
}
RemainingDataLength -= PayloadLength;
if (RemainingDataLength <= 0)
{
Status = InternalFrameFlush(); // flush out collected frame
if (Status != CollatorNoError)
{
InputExit();
return Status;
}
}
COLLATOR_DEBUG("%s PrivateDataPresent %d, RemainingDataLength %d, PayloadLength %d\n",
__FUNCTION__, PrivateDataPresent, RemainingDataLength, PayloadLength);
}
InputExit();
return CollatorNoError;
}
////////////////////////////////////////////////////////////////////////////
///
/// Determine the new state of the collator according to the incoming sub frame
/// Also returns this sub frame length
///
/// \return Collator status code, CollatorNoError indicates success.
///
CollatorStatus_t Collator_PesAudioEAc3_c::DecideCollatorNextStateAndGetLength( unsigned int *FrameLength )
{
FrameParserStatus_t FPStatus;
CollatorStatus_t Status = CollatorNoError; // assume success unless told otherwise
EAc3AudioParsedFrameHeader_t ParsedFrameHeader;
//
FPStatus = FrameParser_AudioEAc3_c::ParseSingleFrameHeader( StoredFrameHeader,
&ParsedFrameHeader,
false);
if( FPStatus == FrameParserNoError )
{
*FrameLength = ParsedFrameHeader.Length;
if (CollatorState == SeekingFrameEnd)
{
// we already have an independant substream accumulated, check what to do with
// this next one
if (((ParsedFrameHeader.Type == TypeEac3Ind) && (ParsedFrameHeader.SubStreamId == ProgrammeId) && (NbAccumulatedSamples == EAC3_NBSAMPLES_NEEDED))
|| (ParsedFrameHeader.Type == TypeAc3))
{
// this is another independant subframe
CollatorState = GotCompleteFrame;
NbAccumulatedSamples = ParsedFrameHeader.NumberOfSamples;
ResetDvdSyncWordHeuristics();
COLLATOR_DEBUG("Got a complete frame!\n");
}
else if ( ParsedFrameHeader.SubStreamId != ProgrammeId )
{
// skip any subframe (independant or dependant) that does not belong to the requested programme
CollatorState = SkipSubFrame;
}
else if ( NbAccumulatedSamples <= EAC3_NBSAMPLES_NEEDED )
{
// according to collator channel configuration,
// read or skip the dependant subframe of the right programme...
CollatorState = EightChannelsRequired?ReadSubFrame:SkipSubFrame;
if (ParsedFrameHeader.Type == TypeEac3Ind)
{
// acumulate samples only if this is an eac3 independant bistream (dependant bitstream provide additional channels only)
NbAccumulatedSamples += ParsedFrameHeader.NumberOfSamples;
}
COLLATOR_DEBUG("Accumulate a subframe of %d/%d samples\n", ParsedFrameHeader.NumberOfSamples, NbAccumulatedSamples);
}
else
{
COLLATOR_ERROR("Accumulated too many samples (%d of %d)\n",
NbAccumulatedSamples, EAC3_NBSAMPLES_NEEDED);
Status = CollatorError;
}
}
else
{
COLLATOR_DEBUG("Synchronized first block is a good candidate for transcoding\n");
CollatorState = ReadSubFrame;
NbAccumulatedSamples = ParsedFrameHeader.NumberOfSamples;
}
}
else
{
Status = CollatorError;
}
return Status;
}
//}}}
//{{{ Input
////////////////////////////////////////////////////////////////////////////
///
/// Extract Frame length from Pes Private Data area if present.
///
/// \return Collator status code, CollatorNoError indicates success.
///
CollatorStatus_t Collator_PesVideoMjpeg_c::Input(PlayerInputDescriptor_t *Input,
unsigned int DataLength,
void *Data,
bool NonBlocking,
unsigned int *DataLengthRemaining)
{
CollatorStatus_t Status = CollatorNoError;
unsigned char *DataBlock = (unsigned char *)Data;
unsigned char *PesHeader;
unsigned int PesLength;
unsigned int PayloadLength;
unsigned int Offset;
unsigned int CodeOffset;
unsigned int Code;
AssertComponentState("Collator_PacketPes_c::Input", ComponentRunning);
COLLATOR_ASSERT(!NonBlocking);
InputEntry(Input, DataLength, Data, NonBlocking);
Offset = 0;
RemainingData = (unsigned char *)Data;
RemainingLength = DataLength;
TerminationFlagIsSet = false;
Offset = 0;
while (Offset < DataLength)
{
// Read the length of the payload
PesHeader = DataBlock + Offset;
PesLength = (PesHeader[4] << 8) + PesHeader[5];
if (PesLength != 0)
PayloadLength = PesLength - PesHeader[8] - 3;
else
PayloadLength = 0;
COLLATOR_DEBUG("DataLength %d, PesLength %d; PayloadLength %d, Offset %d\n", DataLength, PesLength, PayloadLength, Offset);
Offset += PesLength + 6; // PES packet is PesLength + 6 bytes long
Bits.SetPointer(PesHeader + 9); // Set bits pointer ready to process optional fields
if ((PesHeader[7] & 0x80) == 0x80) // PTS present?
//{{{ read PTS
{
Bits.FlushUnseen(4);
PlaybackTime = (unsigned long long)(Bits.Get(3)) << 30;
Bits.FlushUnseen(1);
PlaybackTime |= Bits.Get(15) << 15;
Bits.FlushUnseen(1);
PlaybackTime |= Bits.Get(15);
Bits.FlushUnseen(1);
PlaybackTimeValid = true;
COLLATOR_DEBUG("PTS %llu.\n", PlaybackTime);
}
//}}}
if ((PesHeader[7] & 0xC0) == 0xC0) // DTS present?
//{{{ read DTS
{
Bits.FlushUnseen(4);
DecodeTime = (unsigned long long)(Bits.Get(3)) << 30;
Bits.FlushUnseen(1);
DecodeTime |= Bits.Get(15) << 15;
Bits.FlushUnseen(1);
DecodeTime |= Bits.Get(15);
Bits.FlushUnseen(1);
DecodeTimeValid = true;
}
//}}}
else if ((PesHeader[7] & 0xC0) == 0x40)
{
COLLATOR_ERROR("Malformed pes header contains DTS without PTS.\n");
DiscardAccumulatedData(); // throw away previous frame as incomplete
InputExit();
return CollatorError;
}
RemainingData = PesHeader + (PesLength + 6 - PayloadLength);
RemainingLength = PayloadLength;
while (RemainingLength > 0)
{
Status = FindNextStartCode(&CodeOffset);
if (Status != CollatorNoError) // Error indicates no start code found
{
Status = AccumulateData(RemainingLength, RemainingData);
if (Status != CollatorNoError)
DiscardAccumulatedData();
RemainingLength = 0;
break;
}
// Got one accumulate up to and including it
Status = AccumulateData(CodeOffset + 2, RemainingData);
if (Status != CollatorNoError)
{
DiscardAccumulatedData();
break;
}
Code = RemainingData[CodeOffset + 1];
RemainingLength -= CodeOffset + 2;
RemainingData += CodeOffset + 2;
// Is it a block terminate code
if ((Code == Configuration.BlockTerminateCode) && (AccumulatedDataSize > 2))
{
AccumulatedDataSize -= 2;
Status = InternalFrameFlush((Configuration.StreamTerminateFlushesFrame && (Code == Configuration.StreamTerminationCode)));
if (Status != CollatorNoError)
break;
BufferBase[0] = 0xff;
BufferBase[1] = Code;
AccumulatedDataSize = 2;
}
// Accumulate the start code
Status = AccumulateStartCode(PackStartCode(AccumulatedDataSize - 2, Code));
if (Status != CollatorNoError)
{
DiscardAccumulatedData();
InputExit();
return Status;
}
}
}
InputExit();
return CollatorNoError;
}
////////////////////////////////////////////////////////////////////////////
///
/// Accumulate incoming data until we have the parseable frame header.
///
/// Accumulate data until we have ::FrameHeaderLength
/// bytes stashed away. At this point there is sufficient data accumulated
/// to determine how many bytes will pass us by before the next frame header
/// is expected.
///
/// \return Collator status code, CollatorNoError indicates success.
///
CollatorStatus_t Collator_PesAudio_c::ReadPartialFrameHeader( void )
{
CollatorStatus_t Status;
unsigned int BytesNeeded, BytesToRead, FrameLength;
CollatorState_t OldCollatorState;
//
COLLATOR_DEBUG(">><<\n");
//
BytesNeeded = FrameHeaderLength - GotPartialFrameHeaderBytes;
BytesToRead = min( RemainingElementaryLength, BytesNeeded );
Status = AccumulateData( BytesToRead, RemainingElementaryData );
if( Status == CollatorNoError )
{
GotPartialFrameHeaderBytes += BytesToRead;
RemainingElementaryData += BytesToRead;
RemainingElementaryLength -= BytesToRead;
COLLATOR_DEBUG( "BytesNeeded %d; BytesToRead %d\n", BytesNeeded, BytesToRead );
if( BytesNeeded == BytesToRead )
{
//
// Woo hoo! We've got the whole header, examine it and change state
//
StoredFrameHeader = BufferBase + (AccumulatedDataSize - FrameHeaderLength);
COLLATOR_DEBUG("Got entire frame header packet\n");
//report_dump_hex( severity_note, StoredFrameHeader, FrameHeaderLength, 32, 0);
OldCollatorState = CollatorState;
Status = DecideCollatorNextStateAndGetLength(&FrameLength);
if( Status != CollatorNoError )
{
COLLATOR_DEBUG( "Badly formed frame header; seeking new frame header\n" );
return HandleMissingNextFrameHeader();
}
FramePayloadRemaining = FrameLength - FrameHeaderLength;
if ((int)FramePayloadRemaining < 0)
{
if (CollatorState == GotCompleteFrame)
{
// accumulate the remainder of the frame before the FrameFlush method...
Status = AccumulateData( FrameLength, RemainingElementaryData );
if (Status != CollatorNoError )
{
COLLATOR_DEBUG( "Cannot accumulate data #2 (%d)\n", Status );
return Status;
}
StoredFrameHeader = BufferBase + (AccumulatedDataSize - FrameHeaderLength);
RemainingElementaryData += FrameLength;
RemainingElementaryLength -= FrameLength;
// prepare the next call to ReadFrame by setting the correct FramePayloadRemaining
Status = GetSpecificFrameLength(&FrameLength);
if (Status != CollatorNoError )
{
COLLATOR_DEBUG( "Cannot get the specific frame length (%d)\n", Status );
return Status;
}
FramePayloadRemaining = FrameLength - FrameHeaderLength;
}
else
{
// specific case: reading the header only accumulated too much data
// so discard the extra data
int NbBytesToDiscard = - (int)FramePayloadRemaining;
int temp = NbBytesToDiscard - BytesToRead;
AccumulatedDataSize -= NbBytesToDiscard;
GotPartialFrameHeaderBytes = (temp > 0)?temp:0;
NbBytesToDiscard = min((unsigned int) NbBytesToDiscard, BytesToRead);
RemainingElementaryData -= NbBytesToDiscard;
RemainingElementaryLength += NbBytesToDiscard;
}
}
if (CollatorState == GotCompleteFrame)
{
AccumulatedFrameReady = true;
//
// update the coded frame parameters using the parameters calculated the
// last time we saw a frame header.
//
CodedFrameParameters->PlaybackTimeValid = NextPlaybackTimeValid;
CodedFrameParameters->PlaybackTime = NextPlaybackTime;
CodedFrameParameters->DecodeTimeValid = NextDecodeTimeValid;
CodedFrameParameters->DecodeTime = NextDecodeTime;
}
else if (CollatorState == SkipSubFrame)
{
/* discard the accumulated frame header */
AccumulatedDataSize -= FrameHeaderLength;
}
if (CollatorState == GotCompleteFrame || OldCollatorState == GotSynchronized)
{
//
// at this point we have discovered a frame header and need to attach a time to it.
// we can choose between the normal stamp (the stamp of the current PES packet) or the
// spanning stamp (the stamp of the previous PES packet). Basically if we have accumulated
// a greater number of bytes than our current offset into the PES packet then we want to
// use the spanning time.
//
bool WantSpanningTime = GetOffsetIntoPacket() < (int) GotPartialFrameHeaderBytes;
if( WantSpanningTime && !UseSpanningTime)
{
COLLATOR_ERROR("Wanted to take the spanning time but this was not available.");
WantSpanningTime = false;
}
if( WantSpanningTime )
{
NextPlaybackTimeValid = SpanningPlaybackTimeValid;
NextPlaybackTime = SpanningPlaybackTime;
SpanningPlaybackTimeValid = false;
NextDecodeTimeValid = SpanningDecodeTimeValid;
NextDecodeTime = SpanningDecodeTime;
SpanningDecodeTimeValid = false;
UseSpanningTime = false;
}
else
{
NextPlaybackTimeValid = PlaybackTimeValid;
NextPlaybackTime = PlaybackTime;
PlaybackTimeValid = false;
NextDecodeTimeValid = DecodeTimeValid;
NextDecodeTime = DecodeTime;
DecodeTimeValid = false;
}
}
// switch states and absorb the packet
COLLATOR_DEBUG( "Discovered frame header (frame length %d bytes)\n", FrameLength );
}
}
else
{
COLLATOR_DEBUG( "Cannot accumulate data #3 (%d)\n", Status );
}
return Status;
}
////////////////////////////////////////////////////////////////////////////
///
/// Get the actual frame length once the frame is completed
///
/// This is a stub implementation for collators other than DTS-HD
/// Normally this method should not be called...
///
/// \return Collator status code, CollatorNoError indicates success.
///
CollatorStatus_t Collator_PesAudio_c::GetSpecificFrameLength(unsigned int * FrameLength)
{
*FrameLength = 0;
COLLATOR_ERROR("Call to GetSpecificLength should not occur: general error\n");
return CollatorError;
}
CollatorStatus_t Collator_PesVideoRaw_c::Input(PlayerInputDescriptor_t *Input,
unsigned int DataLength,
void *Data,
bool NonBlocking,
unsigned int *DataLengthRemaining)
{
PlayerStatus_t Status = PlayerNoError;
COLLATOR_ASSERT(!NonBlocking);
AssertComponentState("Collator_PesRaw_c::Input", ComponentRunning);
InputEntry(Input, DataLength, Data, NonBlocking);
// Extract the descriptor timing information
ActOnInputDescriptor(Input);
COLLATOR_DEBUG("DataLength : %d\n", DataLength);
if (DataRemaining == 0)
//{{{ Treat the packet as a header, read metadata and build stream info
{
BufferStructure_t BufferStructure;
class Buffer_c* Buffer;
unsigned int Format;
unsigned char* DataBlock;
unsigned char* PesHeader = (unsigned char*)Data;
unsigned int PesLength;
unsigned int PesHeaderLength;
unsigned int PayloadLength;
COLLATOR_DEBUG("Header : %d\n", DataLength);
//{{{ Read pes header
// Read the length of the payload
PesLength = (PesHeader[4] << 8) + PesHeader[5];
PesHeaderLength = PesHeader[8];
if (PesLength != 0)
PayloadLength = PesLength - PesHeaderLength - 3;
else
PayloadLength = 0;
COLLATOR_DEBUG("DataLength %d, PesLength %d, PesHeaderLength %d, PayloadLength %d\n", DataLength, PesLength, PesHeaderLength, PayloadLength);
Bits.SetPointer(PesHeader + 9); // Set bits pointer ready to process optional fields
if ((PesHeader[7] & 0x80) == 0x80) // PTS present?
//{{{ read PTS
{
Bits.FlushUnseen(4);
PlaybackTime = (unsigned long long)(Bits.Get(3)) << 30;
Bits.FlushUnseen(1);
PlaybackTime |= Bits.Get(15) << 15;
Bits.FlushUnseen(1);
PlaybackTime |= Bits.Get(15);
Bits.FlushUnseen(1);
PlaybackTimeValid = true;
COLLATOR_DEBUG("PTS %llu.\n", PlaybackTime);
}
//}}}
if ((PesHeader[7] & 0xC0) == 0xC0) // DTS present?
//{{{ read DTS
{
Bits.FlushUnseen(4);
DecodeTime = (unsigned long long)(Bits.Get(3)) << 30;
Bits.FlushUnseen(1);
DecodeTime |= Bits.Get(15) << 15;
Bits.FlushUnseen(1);
DecodeTime |= Bits.Get(15);
Bits.FlushUnseen(1);
DecodeTimeValid = true;
}
//}}}
else if ((PesHeader[7] & 0xC0) == 0x40)
{
COLLATOR_ERROR("Malformed pes header contains DTS without PTS.\n");
InputExit();
return CollatorError;
}
//}}}
DataBlock = PesHeader + 9 + PesHeaderLength;
//{{{ Trace
#if 0
report(severity_info, "(%d)\n%06d: ", PayloadLength, 0);
for (int i = 0; i < PayloadLength; i++)
{
report(severity_info, "%02x ", DataBlock[i]);
if (((i + 1) & 0x1f) == 0)
report(severity_info, "\n%06d: ", i + 1);
}
report(severity_info, "\n");
#endif
//}}}
// Check that this is what we think it is
if (strcmp((char*)DataBlock, "STMicroelectronics") != 0)
{
//COLLATOR_TRACE("Id : %s\n", Id);
InputExit();
return FrameParserNoError;
}
DataBlock += strlen((char*)DataBlock) + 1;
// Fill in stream info for frame parser
memcpy(&StreamInfo.width, DataBlock, sizeof(unsigned int));
DataBlock += sizeof(unsigned int);
memcpy(&StreamInfo.height, DataBlock, sizeof(unsigned int));
DataBlock += sizeof(unsigned int);
memcpy(&StreamInfo.FrameRateNumerator, DataBlock, sizeof(unsigned long long));
DataBlock += sizeof(unsigned long long);
memcpy(&StreamInfo.FrameRateDenominator, DataBlock, sizeof(unsigned long long));
DataBlock += sizeof(unsigned long long);
memcpy(&Format, DataBlock, sizeof(unsigned int));
DataBlock += sizeof(unsigned int);
//memcpy (&StreamInfo.interlaced, DataBlock, sizeof (unsigned int));
//DataBlock += sizeof (unsigned int);
memcpy(&DataRemaining, DataBlock, sizeof(unsigned int));
DataBlock += sizeof(unsigned int);
StreamInfo.interlaced = 0;
StreamInfo.pixel_aspect_ratio.Numerator = 1;
StreamInfo.pixel_aspect_ratio.Denominator = 1;
//StreamInfo.FrameRateNumerator = 25;
//StreamInfo.FrameRateDenominator = 1;
StreamInfo.InputWindow.X = 0;
StreamInfo.InputWindow.Y = 0;
StreamInfo.InputWindow.Width = StreamInfo.width;
StreamInfo.InputWindow.Height = StreamInfo.height;
StreamInfo.OutputWindow = StreamInfo.InputWindow;
memset(&StreamInfo.OutputWindow, 0, sizeof(StreamInfo.OutputWindow));
if (DecodeBuffer == NULL)
{
// Fill out the buffer structure request
memset(&BufferStructure, 0x00, sizeof(BufferStructure_t));
BufferStructure.DimensionCount = 2;
BufferStructure.Dimension[0] = StreamInfo.width;
BufferStructure.Dimension[1] = StreamInfo.height;
//{{{ determine buffer format
switch (Format)
{
case CodeToInteger('N', 'V', '2', '2'):
BufferStructure.Format = FormatVideo422_Raster;
break;
case CodeToInteger('R', 'G', 'B', 'P'):
BufferStructure.Format = FormatVideo565_RGB;
break;
case CodeToInteger('R', 'G', 'B', '3'):
BufferStructure.Format = FormatVideo888_RGB;
break;
case CodeToInteger('R', 'G', 'B', '4'):
BufferStructure.Format = FormatVideo8888_ARGB;
break;
case CodeToInteger('Y', 'U', 'Y', 'V'):
BufferStructure.Format = FormatVideo422_YUYV;
break;
default:
COLLATOR_ERROR("Unsupported decode buffer format request %.4s\n", (char*) &Format);
InputExit();
return CollatorError;
}
//}}}
// Ask the manifestor for the buffer
Status = Manifestor->GetDecodeBuffer(&BufferStructure, &Buffer);
if (Status != ManifestorNoError)
{
COLLATOR_ERROR("Failed to get decode buffer\n");
InputExit();
return CollatorError;
}
StreamInfo.buffer_class = (unsigned int*)Buffer;
// Get physical address of data buffer (not actually used later in pipeline)
Status = Buffer->ObtainDataReference(NULL, NULL, (void**)&StreamInfo.buffer, PhysicalAddress);
if (Status != BufferNoError)
{
COLLATOR_ERROR("Failed to get decode buffer data reference\n");
InputExit();
return CollatorError;
}
// Remember cached address so we can write to it
Status = Buffer->ObtainDataReference(NULL, NULL, (void**)&DecodeBuffer, CachedAddress);
if (Status != BufferNoError)
{
COLLATOR_ERROR("Failed to get decode buffer data reference\n");
InputExit();
return CollatorError;
}
CodedFrameBuffer->AttachBuffer(Buffer); // Attach to decode buffer (so it will be freed at the same time)
Buffer->DecrementReferenceCount(); // and release ownership of the buffer to the decode buffer
}
COLLATOR_DEBUG("%s: ImageSize %6d\n", __FUNCTION__, DataRemaining);
COLLATOR_DEBUG("%s: ImageWidth %6d\n", __FUNCTION__, StreamInfo.width);
COLLATOR_DEBUG("%s: ImageHeight %6d\n", __FUNCTION__, StreamInfo.height);
COLLATOR_DEBUG("%s: Format %.4s\n", __FUNCTION__, (char *) &Format);
Status = CollatorNoError;
}
//}}}
else
//{{{ Assume packet is part of data - copy to decode buffer
{
if (DecodeBuffer == NULL)
{
COLLATOR_ERROR("No decode buffer available\n");
InputExit();
return CodecError;
}
// Transfer the packet to the next coded data frame and pass on
memcpy(DecodeBuffer + DataCopied, Data, DataLength);
DataRemaining -= DataLength;
DataCopied += DataLength;
if (DataRemaining <= 0)
{
Status = AccumulateData(sizeof(StreamInfo_t), (unsigned char*)&StreamInfo);
DataRemaining = 0;
DataCopied = 0;
DecodeBuffer = NULL;
if (Status != CollatorNoError)
{
COLLATOR_ERROR("Failed to accumulate StreamInfo\n");
InputExit();
return Status;
}
Status = InternalFrameFlush();
if (Status != CollatorNoError)
COLLATOR_ERROR("Failed to flush frame\n");
}
}
//}}}
InputExit();
return Status;
}
