Ejemplo n.º 1
0
/* Programme the Alt output if there is a rotation*/
void vld_dec_setup_alternative_frame(object_context_p obj_context)
{
    uint32_t cmd = 0;
    psb_cmdbuf_p cmdbuf = obj_context->cmdbuf;
    context_DEC_p ctx = (context_DEC_p) obj_context->format_data;
    psb_surface_p src_surface = obj_context->current_render_target->psb_surface;
    psb_surface_p out_loop_surface = obj_context->current_render_target->out_loop_surface;
    int ved_scaling = (CONTEXT_SCALING(obj_context) && !ctx->yuv_ctx);

    /*  In VPP ctx, current_render_target is rotated surface */
    if (ctx->yuv_ctx && (VAEntrypointVideoProc == obj_context->entry_point)) {
        drv_debug_msg(VIDEO_DEBUG_GENERAL, "Setup second-pass rotation\n");
        out_loop_surface = src_surface;
        src_surface = ctx->yuv_ctx->src_surface;
    }

    if (CONTEXT_ALTERNATIVE_OUTPUT(obj_context) || obj_context->entry_point == VAEntrypointVideoProc) {
        if (ved_scaling) {
            out_loop_surface = obj_context->current_render_target->scaling_surface;
#ifndef BAYTRAIL
            tng_ved_write_scale_reg(obj_context);

            REGIO_WRITE_FIELD_LITE(cmd, MSVDX_CMDS,ALTERNATIVE_OUTPUT_PICTURE_ROTATION, SCALE_INPUT_SIZE_SEL, 1);
            REGIO_WRITE_FIELD_LITE(cmd, MSVDX_CMDS,ALTERNATIVE_OUTPUT_PICTURE_ROTATION, SCALE_ENABLE, 1);
#endif
        }

        if (out_loop_surface == NULL) {
            drv_debug_msg(VIDEO_DEBUG_GENERAL, "out-loop surface is NULL, abort msvdx alternative output\n");
            return;
        }

        if (GET_SURFACE_INFO_rotate(out_loop_surface) != obj_context->msvdx_rotate && !ved_scaling)
            drv_debug_msg(VIDEO_DEBUG_WARNING, "Display rotate mode does not match surface rotate mode!\n");

        /* CRendecBlock    RendecBlk( mCtrlAlloc , RENDEC_REGISTER_OFFSET(MSVDX_CMDS, VC1_LUMA_RANGE_MAPPING_BASE_ADDRESS) ); */
        psb_cmdbuf_rendec_start(cmdbuf, RENDEC_REGISTER_OFFSET(MSVDX_CMDS, VC1_LUMA_RANGE_MAPPING_BASE_ADDRESS));

        psb_cmdbuf_rendec_write_address(cmdbuf, &out_loop_surface->buf, out_loop_surface->buf.buffer_ofs);
        psb_cmdbuf_rendec_write_address(cmdbuf, &out_loop_surface->buf, out_loop_surface->buf.buffer_ofs + out_loop_surface->chroma_offset);

        psb_cmdbuf_rendec_end(cmdbuf);

        REGIO_WRITE_FIELD_LITE(cmd, MSVDX_CMDS, ALTERNATIVE_OUTPUT_PICTURE_ROTATION , ALT_PICTURE_ENABLE, 1);
        REGIO_WRITE_FIELD_LITE(cmd, MSVDX_CMDS, ALTERNATIVE_OUTPUT_PICTURE_ROTATION , ROTATION_ROW_STRIDE, out_loop_surface->stride_mode);
        REGIO_WRITE_FIELD_LITE(cmd, MSVDX_CMDS, ALTERNATIVE_OUTPUT_PICTURE_ROTATION , RECON_WRITE_DISABLE, 0); /* FIXME Always generate Rec */
        REGIO_WRITE_FIELD_LITE(cmd, MSVDX_CMDS, ALTERNATIVE_OUTPUT_PICTURE_ROTATION , ROTATION_MODE, GET_SURFACE_INFO_rotate(out_loop_surface));

        RELOC(*ctx->p_range_mapping_base0, out_loop_surface->buf.buffer_ofs, &out_loop_surface->buf);
        RELOC(*ctx->p_range_mapping_base1, out_loop_surface->buf.buffer_ofs + out_loop_surface->chroma_offset, &out_loop_surface->buf);
    }

    if (obj_context->profile == VAProfileVP8Version0_3 ||
        obj_context->profile == VAProfileJPEGBaseline || ctx->yuv_ctx) {
        psb_cmdbuf_rendec_start(cmdbuf, (REG_MSVDX_CMD_OFFSET + MSVDX_CMDS_AUX_LINE_BUFFER_BASE_ADDRESS_OFFSET));
        psb_cmdbuf_rendec_write_address(cmdbuf, &ctx->aux_line_buffer_vld, ctx->aux_line_buffer_vld.buffer_ofs);
        psb_cmdbuf_rendec_end(cmdbuf);

        REGIO_WRITE_FIELD_LITE(cmd, MSVDX_CMDS, ALTERNATIVE_OUTPUT_PICTURE_ROTATION, USE_AUX_LINE_BUF, 1);
        if (ctx->yuv_ctx)
            REGIO_WRITE_FIELD_LITE(cmd, MSVDX_CMDS, ALTERNATIVE_OUTPUT_PICTURE_ROTATION , RECON_WRITE_DISABLE, 1);
    }

    /* Set the rotation registers */
    psb_cmdbuf_rendec_start(cmdbuf, RENDEC_REGISTER_OFFSET(MSVDX_CMDS, ALTERNATIVE_OUTPUT_PICTURE_ROTATION));
    psb_cmdbuf_rendec_write(cmdbuf, cmd);
    *ctx->alt_output_flags = cmd;

    cmd = 0;
    REGIO_WRITE_FIELD_LITE(cmd, MSVDX_CMDS, EXTENDED_ROW_STRIDE, EXT_ROW_STRIDE, src_surface->stride / 64);
    psb_cmdbuf_rendec_write(cmdbuf, cmd);

    psb_cmdbuf_rendec_end(cmdbuf);
}
Ejemplo n.º 2
0
/*
 * Create and attach a rotate surface to obj_surface
 */
VAStatus psb_CreateRotateSurface(
    object_context_p obj_context,
    object_surface_p obj_surface,
    int msvdx_rotate
)
{
    int width, height;
    psb_surface_p rotate_surface = NULL;
    bool rotate_surfaceAlloc = false;
    VAStatus vaStatus = VA_STATUS_SUCCESS;
    int need_realloc = 0;
    unsigned int flags = 0;
    psb_surface_share_info_p share_info = obj_surface->share_info;
    psb_driver_data_p driver_data = obj_context->driver_data;
    int rotate_stride = 0, rotate_tiling = 0;
    object_config_p obj_config = CONFIG(obj_context->config_id);
    unsigned char * surface_data;

    CHECK_CONFIG(obj_config);

    rotate_surface = obj_surface->out_loop_surface;

    if (msvdx_rotate == 0
#ifdef OVERLAY_ENABLE_MIRROR
        /*Bypass 180 degree rotate when overlay enabling mirror*/
        || msvdx_rotate == VA_ROTATION_180
#endif
        )
        return vaStatus;

    if (rotate_surface) {
        CHECK_SURFACE_REALLOC(rotate_surface, msvdx_rotate, need_realloc);
        if (need_realloc == 0) {
            goto exit;
        } else { /* free the old rotate surface */
            /*FIX ME: it is not safe to do that because surfaces may be in use for rendering.*/
            psb_surface_destroy(obj_surface->out_loop_surface);
            memset(rotate_surface, 0, sizeof(*rotate_surface));
        }
    } else {
        rotate_surface = (psb_surface_p) calloc(1, sizeof(struct psb_surface_s));
        CHECK_ALLOCATION(rotate_surface);
        rotate_surfaceAlloc = true;
    }

#ifdef PSBVIDEO_MSVDX_DEC_TILING
    SET_SURFACE_INFO_tiling(rotate_surface, GET_SURFACE_INFO_tiling(obj_surface->psb_surface));
#endif
#ifdef PSBVIDEO_MRFL_VPP_ROTATE
    SET_SURFACE_INFO_rotate(rotate_surface, msvdx_rotate);
#endif
    drv_debug_msg(VIDEO_DEBUG_GENERAL, "Try to allocate surface for alternative rotate output\n");

    flags = IS_ROTATED;

    if (msvdx_rotate == 2 /* VA_ROTATION_180 */) {
        width = obj_surface->width;
        height = obj_surface->height;

#ifdef PSBVIDEO_MRFL_VPP_ROTATE
    if (obj_config->entrypoint == VAEntrypointVideoProc &&
            share_info && share_info->out_loop_khandle) {
            vaStatus = psb_surface_create_from_kbuf(driver_data, width, height,
                                  obj_surface->psb_surface->size, VA_FOURCC_NV12,
                                  share_info->out_loop_khandle,
                                  obj_surface->psb_surface->stride,
                                  obj_surface->psb_surface->stride,
                                  obj_surface->psb_surface->stride,
                                  0, 0, 0, rotate_surface);
    } else
#endif
            vaStatus = psb_surface_create(driver_data, width, height, VA_FOURCC_NV12,
                                      flags, rotate_surface);
    } else {
        width = obj_surface->height_origin;
        height = (obj_surface->width + 0x1f) & ~0x1f;

#ifdef PSBVIDEO_MRFL_VPP_ROTATE
        if (obj_config->entrypoint == VAEntrypointVideoProc &&
                share_info && share_info->out_loop_khandle != 0) {
                drv_debug_msg(VIDEO_DEBUG_GENERAL,"Create the surface from kbuf out_loop_khandle=%x!\n", share_info->out_loop_khandle);
                rotate_tiling = GET_SURFACE_INFO_tiling(rotate_surface);
                rotate_stride = get_surface_stride(width, rotate_tiling);
                vaStatus = psb_surface_create_from_kbuf(driver_data, width, height,
                                  (rotate_stride * height * 3) / 2, VA_FOURCC_NV12,
                                  share_info->out_loop_khandle,
                                  rotate_stride, rotate_stride, rotate_stride,
                                  0, rotate_stride * height, rotate_stride * height,
                                  rotate_surface);
        } else
#endif
        {
            drv_debug_msg(VIDEO_DEBUG_GENERAL,"Create rotated buffer. width=%d, height=%d\n", width, height);
            if (CONTEXT_SCALING(obj_context)) {
                width = obj_context->scaling_buffer_height;
                height = (obj_context->scaling_buffer_width+ 0x1f) & ~0x1f;
            }
            vaStatus = psb_surface_create(driver_data, width, height, VA_FOURCC_NV12,
                                      flags, rotate_surface);
        }
    }
    if (VA_STATUS_SUCCESS != vaStatus) {
        free(rotate_surface);
        obj_surface->out_loop_surface = NULL;
        vaStatus = VA_STATUS_ERROR_ALLOCATION_FAILED;
        DEBUG_FAILURE;
        return vaStatus;
    }

    //clear rotation surface
     if (CONTEXT_SCALING(obj_context)) {
        if (psb_buffer_map(&rotate_surface->buf, &surface_data)) {
            drv_debug_msg(VIDEO_DEBUG_ERROR, "Failed to map rotation buffer before clear it");
        }
        else {
            memset(surface_data, 0, rotate_surface->chroma_offset);
            memset(surface_data + rotate_surface->chroma_offset, 0x80,
                       rotate_surface->size - rotate_surface->chroma_offset);
            psb_buffer_unmap(&rotate_surface->buf);
        }
    }
    obj_surface->width_r = width;
    obj_surface->height_r = height;

#ifdef PSBVIDEO_MSVDX_DEC_TILING
    drv_debug_msg(VIDEO_DEBUG_GENERAL, "attempt to update tile context\n");
    if (GET_SURFACE_INFO_tiling(rotate_surface) && obj_config->entrypoint != VAEntrypointVideoProc) {
        drv_debug_msg(VIDEO_DEBUG_GENERAL, "update tile context\n");
        object_context_p obj_context = CONTEXT(obj_surface->context_id);
        if (NULL == obj_context) {
            vaStatus = VA_STATUS_ERROR_INVALID_CONTEXT;
            DEBUG_FAILURE;
            if (rotate_surface != NULL && rotate_surfaceAlloc) {
                free(rotate_surface);
                rotate_surface = NULL;
            }
            return vaStatus;
        }
        unsigned long msvdx_tile = psb__tile_stride_log2_256(obj_surface->width_r);
        obj_context->msvdx_tile &= 0xf; /* clear rotate tile */
        obj_context->msvdx_tile |= (msvdx_tile << 4);
        obj_context->ctp_type &= (~PSB_CTX_TILING_MASK); /* clear tile context */
        obj_context->ctp_type |= ((obj_context->msvdx_tile & 0xff) << 16);
        psb_update_context(driver_data, obj_context->ctp_type);
    }
#endif

exit:
    obj_surface->out_loop_surface = rotate_surface;
    SET_SURFACE_INFO_rotate(rotate_surface, msvdx_rotate);
    /* derive the protected flag from the primay surface */
    SET_SURFACE_INFO_protect(rotate_surface,
                             GET_SURFACE_INFO_protect(obj_surface->psb_surface));

    /*notify hwc that rotated buffer is ready to use.
    * TODO: Do these in psb_SyncSurface()
    */
    if (share_info != NULL) {
	share_info->width_r = rotate_surface->stride;
        share_info->height_r = obj_surface->height_r;
        share_info->out_loop_khandle =
            (uint32_t)(wsbmKBufHandle(wsbmKBuf(rotate_surface->buf.drm_buf)));
        share_info->metadata_rotate = VAROTATION2HAL(driver_data->va_rotate);
        share_info->surface_rotate = VAROTATION2HAL(msvdx_rotate);

        share_info->out_loop_luma_stride = rotate_surface->stride;
        share_info->out_loop_chroma_u_stride = rotate_surface->stride;
        share_info->out_loop_chroma_v_stride = rotate_surface->stride;
    }

    return vaStatus;
}