/*
** Configurations for DS0
*/
static void PowerDownConfig(void)
{
unsigned int index = 0;
for(index = 0; index < 16; index++)
{
/* Configure LCD DATA IO Pads for low power mode */
IOPadConfigure(CONTROL_CONF_LCD_DATA(index), IOPAD_GPIO);
/* Skip LCD DATA Clock from configuration */
IOPadSel(&ctrlContext, CONTROL_CONF_LCD_DATA(index), true);
}
/* Configure Ethernet Clocks for low power mode */
IOPadConfigure(CONTROL_CONF_RMII1_REFCLK, IOPAD_GPIO);
IOPadConfigure(CONTROL_CONF_MDIO_CLK, IOPAD_GPIO);
/* Skip Ethernet Clock from configuration */
IOPadSel(&ctrlContext, CONTROL_CONF_RMII1_REFCLK, true);
IOPadSel(&ctrlContext, CONTROL_CONF_MDIO_CLK, true);
/* Skip system I2C Bus from configuration */
IOPadSel(&ctrlContext, CONTROL_CONF_I2C0_SDA, true);
IOPadSel(&ctrlContext, CONTROL_CONF_I2C0_SCL, true);
/* Skip IO pads from CONTROL_CONF_NRESETIN_OUT to DDR for configuration */
for(index = 0u;
index < (CONTROL_CONF_AIN0 - CONTROL_CONF_NRESETIN_OUT)/4u; index++)
{
IOPadSel(&ctrlContext, CONTROL_CONF_NRESETIN_OUT + (4u * index), true);
}
/* Skip configuration of touchscreen IO Pads here */
/* Skip other IO pads from CONTROL_CONF_VREFP for configuration */
for(index = 0u;
index <= (CONTROL_CONF_TESTOUT - CONTROL_CONF_VREFP)/4u; index++)
{
IOPadSel(&ctrlContext, CONTROL_CONF_VREFP + (4u * index), true);
}
/* Add Emulation IO Pads for low power mode configuration */
IOPadSel(&ctrlContext, CONTROL_CONF_EMU(0u), false);
IOPadSel(&ctrlContext, CONTROL_CONF_EMU(1u), false);
/* Add USB VBUS IO Pads for low power mode configuration */
IOPadSel(&ctrlContext, CONTROL_CONF_USB_DRVVBUS(0u), false);
IOPadSel(&ctrlContext, CONTROL_CONF_USB_DRVVBUS(1u), false);
/* Configure other IO Pads */
IOPadSelConfigure(&ctrlContext, IOPAD_GPIO_PULLDN_RXACTIVE);
}
void modulo3(int nGpio){
switch(nGpio){
case GPIO_0 ... GPIO_4:
selectMII1(nGpio);
break;
case GPIO_5 ... GPIO_6:
selectI2C0(nGpio);
break;
case GPIO_7 ... GPIO_8:
GPIOPinMuxSetup(CONTROL_CONF_EMU(0), CONTROL_CONF_MUXMODE(7));
break;
case GPIO_9 ... GPIO_10:
selectMII1(nGpio);
break;
case GPIO_13:
GPIOPinMuxSetup(CONTROL_CONF_USB_DRVVBUS(1), CONTROL_CONF_MUXMODE(7));
break;
case GPIO_14 ... GPIO_21:
selectMCASPO(nGpio);
break;
}
}
void modulo0(int nGpio){
int num;
switch(nGpio){
case GPIO_0 ... GPIO_1:
selectMDIO(nGpio);
break;
case GPIO_2 ... GPIO_6:
selectSPI0(nGpio);
break;
case GPIO_7:
GPIOPinMuxSetup(CONTROL_CONF_ECAP0_IN_PWM0_OUT, CONTROL_CONF_MUXMODE(7));
break;
case GPIO_8 ... GPIO_11:
num = nGpio + 4;
GPIOPinMuxSetup(CONTROL_CONF_LCD_DATA(num), CONTROL_CONF_MUXMODE(7));
break;
case GPIO_12 ... GPIO_15:
selectUART(nGpio);
break;
case GPIO_16 ... GPIO_17:
selectMII(nGpio);
break;
case GPIO_18:
GPIOPinMuxSetup(CONTROL_CONF_USB_DRVVBUS(0), CONTROL_CONF_MUXMODE(7));
break;
case GPIO_19 ... GPIO_20:
selectXDMA(nGpio);
break;
case GPIO_21:
selectMII(nGpio);
break;
case GPIO_22 ... GPIO_23:
num = nGpio - 14;
GPIOPinMuxSetup(CONTROL_CONF_GPMC_AD(num), CONTROL_CONF_MUXMODE(7));
break;
case GPIO_26 ... GPIO_27:
num = nGpio - 16;
GPIOPinMuxSetup(CONTROL_CONF_GPMC_AD(num), CONTROL_CONF_MUXMODE(7));
break;
case GPIO_28:
selectMII(nGpio);
break;
case GPIO_29:
GPIOPinMuxSetup(CONTROL_CONF_RMII1_REFCLK, CONTROL_CONF_MUXMODE(7));
break;
case GPIO_30:
GPIOPinMuxSetup(CONTROL_CONF_GPMC_WAIT0, CONTROL_CONF_MUXMODE(7));
break;
case GPIO_31:
GPIOPinMuxSetup(CONTROL_CONF_GPMC_WPN, CONTROL_CONF_MUXMODE(7));
break;
}
}
