static void
dec_2100_a500_cons_init(void)
{
struct ctb *ctb;
uint64_t ctbslot;
struct ttwoga_config *tcp;
ctb = (struct ctb *)(((char *)hwrpb) + hwrpb->rpb_ctb_off);
ctbslot = ctb->ctb_turboslot;
tcp = ttwoga_init(0, 0);
switch (ctb->ctb_term_type) {
case CTB_PRINTERPORT:
/* serial console ... */
assert(CTB_TURBOSLOT_HOSE(ctbslot) == 0);
/* XXX */
{
/*
* Delay to allow PROM putchars to complete.
* FIFO depth * character time,
* character time = (1000000 / (defaultrate / 10))
*/
DELAY(160000000 / comcnrate);
if(comcnattach(&tcp->tc_iot, 0x3f8, comcnrate,
COM_FREQ, COM_TYPE_NORMAL,
(TTYDEF_CFLAG & ~(CSIZE | PARENB)) | CS8))
panic("can't init serial console");
break;
}
case CTB_GRAPHICS:
#if NPCKBD > 0
/* display console ... */
/* XXX */
(void) pckbc_cnattach(&tcp->tc_iot, IO_KBD, KBCMDP,
PCKBC_KBD_SLOT, 0);
switch (CTB_TURBOSLOT_TYPE(ctbslot)) {
case CTB_TURBOSLOT_TYPE_ISA:
/*
* XXX The following is apparently necessary for an
* XXX ISA VGA card, but what happens with real EISA
* XXX VGA cards?
*/
case CTB_TURBOSLOT_TYPE_EISA:
isa_display_console(&tcp->tc_iot, &tcp->tc_memt);
break;
case CTB_TURBOSLOT_TYPE_PCI:
/* The display PCI might be different */
tcp = ttwoga_init(0, CTB_TURBOSLOT_HOSE(ctbslot));
pci_display_console(&tcp->tc_iot, &tcp->tc_memt,
&tcp->tc_pc, CTB_TURBOSLOT_BUS(ctbslot),
CTB_TURBOSLOT_SLOT(ctbslot), 0);
break;
default:
printf("type = 0x%lx, hose = 0x%lx, bus = 0x%lx, "
"slot = 0x%lx\n",
CTB_TURBOSLOT_TYPE(ctbslot),
CTB_TURBOSLOT_HOSE(ctbslot),
CTB_TURBOSLOT_BUS(ctbslot),
CTB_TURBOSLOT_SLOT(ctbslot));
panic("unknown display console type");
}
#else
panic("not configured to use display && keyboard console");
#endif
break;
default:
printf("ctb->ctb_term_type = 0x%lx\n", ctb->ctb_term_type);
printf("ctb->ctb_turboslot = 0x%lx\n", ctb->ctb_turboslot);
panic("consinit: unknown console type %ld",
ctb->ctb_term_type);
}
#ifdef KGDB
/* Attach the KGDB device. */
alpha_kgdb_init(kgdb_devlist, &tcp->tc_iot);
#endif /* KGDB */
}
static void
dec_6600_cons_init()
{
struct ctb *ctb;
u_int64_t ctbslot;
struct tsp_config *tsp;
ctb = (struct ctb *)(((caddr_t)hwrpb) + hwrpb->rpb_ctb_off);
ctbslot = ctb->ctb_turboslot;
/* Console hose defaults to hose 0. */
tsp_console_hose = 0;
tsp = tsp_init(0, tsp_console_hose);
switch (ctb->ctb_term_type) {
case CTB_PRINTERPORT:
/* serial console ... */
/* XXX */
{
/*
* Delay to allow PROM putchars to complete.
* FIFO depth * character time,
* character time = (1000000 / (defaultrate / 10))
*/
DELAY(160000000 / comcnrate);
if(comcnattach(&tsp->pc_iot, 0x3f8, comcnrate,
COM_FREQ,
(TTYDEF_CFLAG & ~(CSIZE | PARENB)) | CS8))
panic("can't init serial console");
break;
}
case CTB_GRAPHICS:
#if NPCKBD > 0
/* display console ... */
/* XXX */
(void) pckbc_cnattach(&tsp->pc_iot, IO_KBD, KBCMDP, 0);
if (CTB_TURBOSLOT_TYPE(ctbslot) ==
CTB_TURBOSLOT_TYPE_ISA)
isa_display_console(&tsp->pc_iot, &tsp->pc_memt);
else {
/* The display PCI might be different */
tsp_console_hose = CTB_TURBOSLOT_HOSE(ctbslot);
tsp = tsp_init(0, tsp_console_hose);
pci_display_console(&tsp->pc_iot, &tsp->pc_memt,
&tsp->pc_pc, CTB_TURBOSLOT_BUS(ctbslot),
CTB_TURBOSLOT_SLOT(ctbslot), 0);
}
#else
panic("not configured to use display && keyboard console");
#endif
break;
default:
printf("ctb_term_type = 0x%lx ctb_turboslot = 0x%lx"
" hose = %ld\n",
(unsigned long)ctb->ctb_term_type,
(unsigned long)ctbslot,
(unsigned long)CTB_TURBOSLOT_HOSE(ctbslot));
panic("consinit: unknown console type %lu",
(unsigned long)ctb->ctb_term_type);
}
}
