static inline
int epu_cmd_irq(struct cx18 *cx, struct cx18_epu_work_order *order)
{
int ret = -1;
switch (order->rpu) {
case CPU:
{
switch (order->mb.cmd) {
case CX18_EPU_DMA_DONE:
ret = epu_dma_done_irq(cx, order);
break;
case CX18_EPU_DEBUG:
ret = epu_debug_irq(cx, order);
break;
default:
CX18_WARN("Unknown CPU to EPU mailbox command %#0x\n",
order->mb.cmd);
break;
}
break;
}
case APU:
CX18_WARN("Unknown APU to EPU mailbox command %#0x\n",
order->mb.cmd);
break;
default:
break;
}
return ret;
}
static void epu_cmd(struct cx18 *cx, struct cx18_epu_work_order *order)
{
switch (order->rpu) {
case CPU:
{
switch (order->mb.cmd) {
case CX18_EPU_DMA_DONE:
epu_dma_done(cx, order);
break;
case CX18_EPU_DEBUG:
epu_debug(cx, order);
break;
default:
CX18_WARN("Unknown CPU to EPU mailbox command %#0x\n",
order->mb.cmd);
break;
}
break;
}
case APU:
CX18_WARN("Unknown APU to EPU mailbox command %#0x\n",
order->mb.cmd);
break;
default:
break;
}
}
static void mb_ack_irq(struct cx18 *cx, struct cx18_epu_work_order *order)
{
struct cx18_mailbox __iomem *ack_mb;
u32 ack_irq, req;
switch (order->rpu) {
case APU:
ack_irq = IRQ_EPU_TO_APU_ACK;
ack_mb = &cx->scb->apu2epu_mb;
break;
case CPU:
ack_irq = IRQ_EPU_TO_CPU_ACK;
ack_mb = &cx->scb->cpu2epu_mb;
break;
default:
CX18_WARN("Unhandled RPU (%d) for command %x ack\n",
order->rpu, order->mb.cmd);
return;
}
req = order->mb.request;
/* Don't ack if the RPU has gotten impatient and timed us out */
if (req != cx18_readl(cx, &ack_mb->request) ||
req == cx18_readl(cx, &ack_mb->ack)) {
CX18_DEBUG_WARN("Possibly falling behind: %s self-ack'ed our "
"incoming %s to EPU mailbox (sequence no. %u) "
"while processing\n",
rpu_str[order->rpu], rpu_str[order->rpu], req);
order->flags |= CX18_F_EWO_MB_STALE_WHILE_PROC;
return;
}
cx18_writel(cx, req, &ack_mb->ack);
cx18_write_reg_expect(cx, ack_irq, SW2_INT_SET, ack_irq, ack_irq);
return;
}
static int cx18_setup_vbi_fmt(struct cx18 *cx,
enum v4l2_mpeg_stream_vbi_fmt fmt,
enum v4l2_mpeg_stream_type type)
{
if (!(cx->v4l2_cap & V4L2_CAP_SLICED_VBI_CAPTURE))
return -EINVAL;
if (atomic_read(&cx->ana_capturing) > 0)
return -EBUSY;
if (fmt != V4L2_MPEG_STREAM_VBI_FMT_IVTV ||
!(type == V4L2_MPEG_STREAM_TYPE_MPEG2_PS ||
type == V4L2_MPEG_STREAM_TYPE_MPEG2_DVD ||
type == V4L2_MPEG_STREAM_TYPE_MPEG2_SVCD)) {
/* Only IVTV fmt VBI insertion & only MPEG-2 PS type streams */
cx->vbi.insert_mpeg = V4L2_MPEG_STREAM_VBI_FMT_NONE;
CX18_DEBUG_INFO("disabled insertion of sliced VBI data into "
"the MPEG stream\n");
return 0;
}
/* Allocate sliced VBI buffers if needed. */
if (cx->vbi.sliced_mpeg_data[0] == NULL) {
int i;
for (i = 0; i < CX18_VBI_FRAMES; i++) {
cx->vbi.sliced_mpeg_data[i] =
kmalloc(CX18_SLICED_MPEG_DATA_BUFSZ, GFP_KERNEL);
if (cx->vbi.sliced_mpeg_data[i] == NULL) {
while (--i >= 0) {
kfree(cx->vbi.sliced_mpeg_data[i]);
cx->vbi.sliced_mpeg_data[i] = NULL;
}
cx->vbi.insert_mpeg =
V4L2_MPEG_STREAM_VBI_FMT_NONE;
CX18_WARN("Unable to allocate buffers for "
"sliced VBI data insertion\n");
return -ENOMEM;
}
}
}
cx->vbi.insert_mpeg = fmt;
CX18_DEBUG_INFO("enabled insertion of sliced VBI data into the MPEG PS,"
"when sliced VBI is enabled\n");
/*
* If our current settings have no lines set for capture, store a valid,
* default set of service lines to capture, in our current settings.
*/
if (cx18_get_service_set(cx->vbi.sliced_in) == 0) {
if (cx->is_60hz)
cx->vbi.sliced_in->service_set =
V4L2_SLICED_CAPTION_525;
else
cx->vbi.sliced_in->service_set = V4L2_SLICED_WSS_625;
cx18_expand_service_set(cx->vbi.sliced_in, cx->is_50hz);
}
return 0;
}
static int cx18_s_stream_vbi_fmt(struct cx2341x_handler *cxhdl, u32 fmt)
{
struct cx18 *cx = container_of(cxhdl, struct cx18, cxhdl);
int type = cxhdl->stream_type->val;
if (atomic_read(&cx->ana_capturing) > 0)
return -EBUSY;
if (fmt != V4L2_MPEG_STREAM_VBI_FMT_IVTV ||
!(type == V4L2_MPEG_STREAM_TYPE_MPEG2_PS ||
type == V4L2_MPEG_STREAM_TYPE_MPEG2_DVD ||
type == V4L2_MPEG_STREAM_TYPE_MPEG2_SVCD)) {
/* */
cx->vbi.insert_mpeg = V4L2_MPEG_STREAM_VBI_FMT_NONE;
CX18_DEBUG_INFO("disabled insertion of sliced VBI data into "
"the MPEG stream\n");
return 0;
}
/* */
if (cx->vbi.sliced_mpeg_data[0] == NULL) {
int i;
for (i = 0; i < CX18_VBI_FRAMES; i++) {
cx->vbi.sliced_mpeg_data[i] =
kmalloc(CX18_SLICED_MPEG_DATA_BUFSZ, GFP_KERNEL);
if (cx->vbi.sliced_mpeg_data[i] == NULL) {
while (--i >= 0) {
kfree(cx->vbi.sliced_mpeg_data[i]);
cx->vbi.sliced_mpeg_data[i] = NULL;
}
cx->vbi.insert_mpeg =
V4L2_MPEG_STREAM_VBI_FMT_NONE;
CX18_WARN("Unable to allocate buffers for "
"sliced VBI data insertion\n");
return -ENOMEM;
}
}
}
cx->vbi.insert_mpeg = fmt;
CX18_DEBUG_INFO("enabled insertion of sliced VBI data into the MPEG PS,"
"when sliced VBI is enabled\n");
/*
*/
if (cx18_get_service_set(cx->vbi.sliced_in) == 0) {
if (cx->is_60hz)
cx->vbi.sliced_in->service_set =
V4L2_SLICED_CAPTION_525;
else
cx->vbi.sliced_in->service_set = V4L2_SLICED_WSS_625;
cx18_expand_service_set(cx->vbi.sliced_in, cx->is_50hz);
}
return 0;
}
/* This function tries to claim the stream for a specific file descriptor.
If no one else is using this stream then the stream is claimed and
associated VBI and IDX streams are also automatically claimed.
Possible error returns: -EBUSY if someone else has claimed
the stream or 0 on success. */
int cx18_claim_stream(struct cx18_open_id *id, int type)
{
struct cx18 *cx = id->cx;
struct cx18_stream *s = &cx->streams[type];
struct cx18_stream *s_assoc;
/* Nothing should ever try to directly claim the IDX stream */
if (type == CX18_ENC_STREAM_TYPE_IDX) {
CX18_WARN("MPEG Index stream cannot be claimed "
"directly, but something tried.\n");
return -EINVAL;
}
if (test_and_set_bit(CX18_F_S_CLAIMED, &s->s_flags)) {
/* someone already claimed this stream */
if (s->id == id->open_id) {
/* yes, this file descriptor did. So that's OK. */
return 0;
}
if (s->id == -1 && type == CX18_ENC_STREAM_TYPE_VBI) {
/* VBI is handled already internally, now also assign
the file descriptor to this stream for external
reading of the stream. */
s->id = id->open_id;
CX18_DEBUG_INFO("Start Read VBI\n");
return 0;
}
/* someone else is using this stream already */
CX18_DEBUG_INFO("Stream %d is busy\n", type);
return -EBUSY;
}
s->id = id->open_id;
/*
* CX18_ENC_STREAM_TYPE_MPG needs to claim:
* CX18_ENC_STREAM_TYPE_VBI, if VBI insertion is on for sliced VBI, or
* CX18_ENC_STREAM_TYPE_IDX, if VBI insertion is off for sliced VBI
* (We don't yet fix up MPEG Index entries for our inserted packets).
*
* For all other streams we're done.
*/
if (type != CX18_ENC_STREAM_TYPE_MPG)
return 0;
s_assoc = &cx->streams[CX18_ENC_STREAM_TYPE_IDX];
if (cx->vbi.insert_mpeg && !cx18_raw_vbi(cx))
s_assoc = &cx->streams[CX18_ENC_STREAM_TYPE_VBI];
else if (!cx18_stream_enabled(s_assoc))
return 0;
set_bit(CX18_F_S_CLAIMED, &s_assoc->s_flags);
/* mark that it is used internally */
set_bit(CX18_F_S_INTERNAL_USE, &s_assoc->s_flags);
return 0;
}
void cx18_api_epu_cmd_irq(struct cx18 *cx, int rpu)
{
struct cx18_mailbox __iomem *mb;
struct cx18_mailbox *order_mb;
struct cx18_epu_work_order *order;
int submit;
switch (rpu) {
case CPU:
mb = &cx->scb->cpu2epu_mb;
break;
case APU:
mb = &cx->scb->apu2epu_mb;
break;
default:
return;
}
order = alloc_epu_work_order_irq(cx);
if (order == NULL) {
CX18_WARN("Unable to find blank work order form to schedule "
"incoming mailbox command processing\n");
return;
}
order->flags = 0;
order->rpu = rpu;
order_mb = &order->mb;
/* mb->cmd and mb->args[0] through mb->args[2] */
cx18_memcpy_fromio(cx, &order_mb->cmd, &mb->cmd, 4 * sizeof(u32));
/* mb->request and mb->ack. N.B. we want to read mb->ack last */
cx18_memcpy_fromio(cx, &order_mb->request, &mb->request,
2 * sizeof(u32));
if (order_mb->request == order_mb->ack) {
CX18_DEBUG_WARN("Possibly falling behind: %s self-ack'ed our "
"incoming %s to EPU mailbox (sequence no. %u)"
"\n",
rpu_str[rpu], rpu_str[rpu], order_mb->request);
if (cx18_debug & CX18_DBGFLG_WARN)
dump_mb(cx, order_mb, "incoming");
order->flags = CX18_F_EWO_MB_STALE_UPON_RECEIPT;
}
/*
* Individual EPU command processing is responsible for ack-ing
* a non-stale mailbox as soon as possible
*/
submit = epu_cmd_irq(cx, order);
if (submit > 0) {
queue_work(cx->work_queue, &order->work);
}
}
long cx18_mb_ack(struct cx18 *cx, const struct cx18_mailbox *mb)
{
const struct cx18_api_info *info = find_api_info(mb->cmd);
struct cx18_mailbox __iomem *ack_mb;
u32 ack_irq;
u8 rpu = CPU;
if (info == NULL && mb->cmd) {
CX18_WARN("Cannot ack unknown command %x\n", mb->cmd);
return -EINVAL;
}
if (info)
rpu = info->rpu;
switch (rpu) {
case HPU:
ack_irq = IRQ_EPU_TO_HPU_ACK;
ack_mb = &cx->scb->hpu2epu_mb;
break;
case APU:
ack_irq = IRQ_EPU_TO_APU_ACK;
ack_mb = &cx->scb->apu2epu_mb;
break;
case CPU:
ack_irq = IRQ_EPU_TO_CPU_ACK;
ack_mb = &cx->scb->cpu2epu_mb;
break;
default:
CX18_WARN("Unknown RPU for command %x\n", mb->cmd);
return -EINVAL;
}
cx18_setup_page(cx, SCB_OFFSET);
cx18_write_sync(cx, mb->request, &ack_mb->ack);
cx18_write_reg(cx, ack_irq, SW2_INT_SET);
return 0;
}
static int __devinit cx18_probe(struct pci_dev *dev,
const struct pci_device_id *pci_id)
{
int retval = 0;
int vbi_buf_size;
u32 devtype;
struct cx18 *cx;
spin_lock(&cx18_cards_lock);
/* Make sure we've got a place for this card */
if (cx18_cards_active == CX18_MAX_CARDS) {
printk(KERN_ERR "cx18: Maximum number of cards detected (%d).\n",
cx18_cards_active);
spin_unlock(&cx18_cards_lock);
return -ENOMEM;
}
cx = kzalloc(sizeof(struct cx18), GFP_ATOMIC);
if (!cx) {
spin_unlock(&cx18_cards_lock);
return -ENOMEM;
}
cx18_cards[cx18_cards_active] = cx;
cx->dev = dev;
cx->num = cx18_cards_active++;
snprintf(cx->name, sizeof(cx->name), "cx18-%d", cx->num);
CX18_INFO("Initializing card #%d\n", cx->num);
spin_unlock(&cx18_cards_lock);
cx18_process_options(cx);
if (cx->options.cardtype == -1) {
retval = -ENODEV;
goto err;
}
if (cx18_init_struct1(cx)) {
retval = -ENOMEM;
goto err;
}
CX18_DEBUG_INFO("base addr: 0x%08x\n", cx->base_addr);
/* PCI Device Setup */
retval = cx18_setup_pci(cx, dev, pci_id);
if (retval != 0) {
if (retval == -EIO)
goto free_workqueue;
else if (retval == -ENXIO)
goto free_mem;
}
/* save cx in the pci struct for later use */
pci_set_drvdata(dev, cx);
/* map io memory */
CX18_DEBUG_INFO("attempting ioremap at 0x%08x len 0x%08x\n",
cx->base_addr + CX18_MEM_OFFSET, CX18_MEM_SIZE);
cx->enc_mem = ioremap_nocache(cx->base_addr + CX18_MEM_OFFSET,
CX18_MEM_SIZE);
if (!cx->enc_mem) {
CX18_ERR("ioremap failed, perhaps increasing __VMALLOC_RESERVE in page.h\n");
CX18_ERR("or disabling CONFIG_HIGHMEM4G into the kernel would help\n");
retval = -ENOMEM;
goto free_mem;
}
cx->reg_mem = cx->enc_mem + CX18_REG_OFFSET;
devtype = read_reg(0xC72028);
switch (devtype & 0xff000000) {
case 0xff000000:
CX18_INFO("cx23418 revision %08x (A)\n", devtype);
break;
case 0x01000000:
CX18_INFO("cx23418 revision %08x (B)\n", devtype);
break;
default:
CX18_INFO("cx23418 revision %08x (Unknown)\n", devtype);
break;
}
cx18_init_power(cx, 1);
cx18_init_memory(cx);
cx->scb = (struct cx18_scb __iomem *)(cx->enc_mem + SCB_OFFSET);
cx18_init_scb(cx);
cx18_gpio_init(cx);
/* active i2c */
CX18_DEBUG_INFO("activating i2c...\n");
if (init_cx18_i2c(cx)) {
CX18_ERR("Could not initialize i2c\n");
goto free_map;
}
CX18_DEBUG_INFO("Active card count: %d.\n", cx18_cards_active);
if (cx->card->hw_all & CX18_HW_TVEEPROM) {
/* Based on the model number the cardtype may be changed.
The PCI IDs are not always reliable. */
cx18_process_eeprom(cx);
}
if (cx->card->comment)
CX18_INFO("%s", cx->card->comment);
if (cx->card->v4l2_capabilities == 0) {
retval = -ENODEV;
goto free_i2c;
}
cx18_init_memory(cx);
/* Register IRQ */
retval = request_irq(cx->dev->irq, cx18_irq_handler,
IRQF_SHARED | IRQF_DISABLED, cx->name, (void *)cx);
if (retval) {
CX18_ERR("Failed to register irq %d\n", retval);
goto free_i2c;
}
if (cx->std == 0)
cx->std = V4L2_STD_NTSC_M;
if (cx->options.tuner == -1) {
int i;
for (i = 0; i < CX18_CARD_MAX_TUNERS; i++) {
if ((cx->std & cx->card->tuners[i].std) == 0)
continue;
cx->options.tuner = cx->card->tuners[i].tuner;
break;
}
}
/* if no tuner was found, then pick the first tuner in the card list */
if (cx->options.tuner == -1 && cx->card->tuners[0].std) {
cx->std = cx->card->tuners[0].std;
if (cx->std & V4L2_STD_PAL)
cx->std = V4L2_STD_PAL_BG | V4L2_STD_PAL_H;
else if (cx->std & V4L2_STD_NTSC)
cx->std = V4L2_STD_NTSC_M;
else if (cx->std & V4L2_STD_SECAM)
cx->std = V4L2_STD_SECAM_L;
cx->options.tuner = cx->card->tuners[0].tuner;
}
if (cx->options.radio == -1)
cx->options.radio = (cx->card->radio_input.audio_type != 0);
/* The card is now fully identified, continue with card-specific
initialization. */
cx18_init_struct2(cx);
cx18_load_and_init_modules(cx);
if (cx->std & V4L2_STD_525_60) {
cx->is_60hz = 1;
cx->is_out_60hz = 1;
} else {
cx->is_50hz = 1;
cx->is_out_50hz = 1;
}
cx->params.video_gop_size = cx->is_60hz ? 15 : 12;
cx->stream_buf_size[CX18_ENC_STREAM_TYPE_MPG] = 0x08000;
cx->stream_buf_size[CX18_ENC_STREAM_TYPE_TS] = 0x08000;
cx->stream_buf_size[CX18_ENC_STREAM_TYPE_PCM] = 0x01200;
cx->stream_buf_size[CX18_ENC_STREAM_TYPE_YUV] = 0x20000;
vbi_buf_size = cx->vbi.raw_size * (cx->is_60hz ? 24 : 36) / 2;
cx->stream_buf_size[CX18_ENC_STREAM_TYPE_VBI] = vbi_buf_size;
if (cx->options.radio > 0)
cx->v4l2_cap |= V4L2_CAP_RADIO;
if (cx->options.tuner > -1) {
struct tuner_setup setup;
setup.addr = ADDR_UNSET;
setup.type = cx->options.tuner;
setup.mode_mask = T_ANALOG_TV; /* matches TV tuners */
setup.tuner_callback = (setup.type == TUNER_XC2028) ?
cx18_reset_tuner_gpio : NULL;
cx18_call_i2c_clients(cx, TUNER_SET_TYPE_ADDR, &setup);
if (setup.type == TUNER_XC2028) {
static struct xc2028_ctrl ctrl = {
.fname = XC2028_DEFAULT_FIRMWARE,
.max_len = 64,
};
struct v4l2_priv_tun_config cfg = {
.tuner = cx->options.tuner,
.priv = &ctrl,
};
cx18_call_i2c_clients(cx, TUNER_SET_CONFIG, &cfg);
}
}
/* The tuner is fixed to the standard. The other inputs (e.g. S-Video)
are not. */
cx->tuner_std = cx->std;
retval = cx18_streams_setup(cx);
if (retval) {
CX18_ERR("Error %d setting up streams\n", retval);
goto free_irq;
}
retval = cx18_streams_register(cx);
if (retval) {
CX18_ERR("Error %d registering devices\n", retval);
goto free_streams;
}
CX18_INFO("Initialized card #%d: %s\n", cx->num, cx->card_name);
return 0;
free_streams:
cx18_streams_cleanup(cx, 1);
free_irq:
free_irq(cx->dev->irq, (void *)cx);
free_i2c:
exit_cx18_i2c(cx);
free_map:
cx18_iounmap(cx);
free_mem:
release_mem_region(cx->base_addr, CX18_MEM_SIZE);
free_workqueue:
err:
if (retval == 0)
retval = -ENODEV;
CX18_ERR("Error %d on initialization\n", retval);
kfree(cx18_cards[cx18_cards_active]);
cx18_cards[cx18_cards_active] = NULL;
return retval;
}
int cx18_init_on_first_open(struct cx18 *cx)
{
int video_input;
int fw_retry_count = 3;
struct v4l2_frequency vf;
struct cx18_open_id fh;
fh.cx = cx;
if (test_bit(CX18_F_I_FAILED, &cx->i_flags))
return -ENXIO;
if (test_and_set_bit(CX18_F_I_INITED, &cx->i_flags))
return 0;
while (--fw_retry_count > 0) {
/* load firmware */
if (cx18_firmware_init(cx) == 0)
break;
if (fw_retry_count > 1)
CX18_WARN("Retry loading firmware\n");
}
if (fw_retry_count == 0) {
set_bit(CX18_F_I_FAILED, &cx->i_flags);
return -ENXIO;
}
set_bit(CX18_F_I_LOADED_FW, &cx->i_flags);
/* Init the firmware twice to work around a silicon bug
* transport related. */
fw_retry_count = 3;
while (--fw_retry_count > 0) {
/* load firmware */
if (cx18_firmware_init(cx) == 0)
break;
if (fw_retry_count > 1)
CX18_WARN("Retry loading firmware\n");
}
if (fw_retry_count == 0) {
set_bit(CX18_F_I_FAILED, &cx->i_flags);
return -ENXIO;
}
vf.tuner = 0;
vf.type = V4L2_TUNER_ANALOG_TV;
vf.frequency = 6400; /* the tuner 'baseline' frequency */
/* Set initial frequency. For PAL/SECAM broadcasts no
'default' channel exists AFAIK. */
if (cx->std == V4L2_STD_NTSC_M_JP)
vf.frequency = 1460; /* ch. 1 91250*16/1000 */
else if (cx->std & V4L2_STD_NTSC_M)
vf.frequency = 1076; /* ch. 4 67250*16/1000 */
video_input = cx->active_input;
cx->active_input++; /* Force update of input */
cx18_s_input(NULL, &fh, video_input);
/* Let the VIDIOC_S_STD ioctl do all the work, keeps the code
in one place. */
cx->std++; /* Force full standard initialization */
cx18_s_std(NULL, &fh, &cx->tuner_std);
cx18_s_frequency(NULL, &fh, &vf);
return 0;
}
static void cx18_remove(struct pci_dev *pci_dev)
{
struct cx18 *cx = pci_get_drvdata(pci_dev);
CX18_DEBUG_INFO("Removing Card #%d\n", cx->num);
/* Stop all captures */
CX18_DEBUG_INFO("Stopping all streams\n");
if (atomic_read(&cx->tot_capturing) > 0)
cx18_stop_all_captures(cx);
/* Interrupts */
sw1_irq_disable(IRQ_CPU_TO_EPU | IRQ_APU_TO_EPU);
sw2_irq_disable(IRQ_CPU_TO_EPU_ACK | IRQ_APU_TO_EPU_ACK);
cx18_halt_firmware(cx);
cx18_streams_cleanup(cx, 1);
exit_cx18_i2c(cx);
free_irq(cx->dev->irq, (void *)cx);
cx18_iounmap(cx);
release_mem_region(cx->base_addr, CX18_MEM_SIZE);
pci_disable_device(cx->dev);
CX18_INFO("Removed %s, card #%d\n", cx->card_name, cx->num);
}
/* define a pci_driver for card detection */
static struct pci_driver cx18_pci_driver = {
.name = "cx18",
.id_table = cx18_pci_tbl,
.probe = cx18_probe,
.remove = cx18_remove,
};
static int module_start(void)
{
printk(KERN_INFO "cx18: Start initialization, version %s\n", CX18_VERSION);
memset(cx18_cards, 0, sizeof(cx18_cards));
/* Validate parameters */
if (cx18_first_minor < 0 || cx18_first_minor >= CX18_MAX_CARDS) {
printk(KERN_ERR "cx18: Exiting, ivtv_first_minor must be between 0 and %d\n",
CX18_MAX_CARDS - 1);
return -1;
}
if (cx18_debug < 0 || cx18_debug > 511) {
cx18_debug = 0;
printk(KERN_INFO "cx18: Debug value must be >= 0 and <= 511!\n");
}
if (pci_register_driver(&cx18_pci_driver)) {
printk(KERN_ERR "cx18: Error detecting PCI card\n");
return -ENODEV;
}
printk(KERN_INFO "cx18: End initialization\n");
return 0;
}
static void module_cleanup(void)
{
int i;
pci_unregister_driver(&cx18_pci_driver);
for (i = 0; i < cx18_cards_active; i++) {
if (cx18_cards[i] == NULL)
continue;
kfree(cx18_cards[i]);
}
}
static v4l2_std_id cx18_parse_std(struct cx18 *cx)
{
switch (pal[0]) {
case '6':
return V4L2_STD_PAL_60;
case 'b':
case 'B':
case 'g':
case 'G':
return V4L2_STD_PAL_BG;
case 'h':
case 'H':
return V4L2_STD_PAL_H;
case 'n':
case 'N':
if (pal[1] == 'c' || pal[1] == 'C')
return V4L2_STD_PAL_Nc;
return V4L2_STD_PAL_N;
case 'i':
case 'I':
return V4L2_STD_PAL_I;
case 'd':
case 'D':
case 'k':
case 'K':
return V4L2_STD_PAL_DK;
case 'M':
case 'm':
return V4L2_STD_PAL_M;
case '-':
break;
default:
CX18_WARN("pal= argument not recognised\n");
return 0;
}
switch (secam[0]) {
case 'b':
case 'B':
case 'g':
case 'G':
case 'h':
case 'H':
return V4L2_STD_SECAM_B | V4L2_STD_SECAM_G | V4L2_STD_SECAM_H;
case 'd':
case 'D':
case 'k':
case 'K':
return V4L2_STD_SECAM_DK;
case 'l':
case 'L':
if (secam[1] == 'C' || secam[1] == 'c')
return V4L2_STD_SECAM_LC;
return V4L2_STD_SECAM_L;
case '-':
break;
default:
CX18_WARN("secam= argument not recognised\n");
return 0;
}
switch (ntsc[0]) {
case 'm':
case 'M':
return V4L2_STD_NTSC_M;
case 'j':
case 'J':
return V4L2_STD_NTSC_M_JP;
case 'k':
case 'K':
return V4L2_STD_NTSC_M_KR;
case '-':
break;
default:
CX18_WARN("ntsc= argument not recognised\n");
return 0;
}
/* no match found */
return 0;
}
int cx18_api_func(void *priv, u32 cmd, int in, int out,
u32 data[CX2341X_MBOX_MAX_DATA])
{
struct cx18_api_func_private *api_priv = priv;
struct cx18 *cx = api_priv->cx;
struct cx18_stream *s = api_priv->s;
switch (cmd) {
case CX2341X_ENC_SET_OUTPUT_PORT:
return 0;
case CX2341X_ENC_SET_FRAME_RATE:
return cx18_vapi(cx, CX18_CPU_SET_VIDEO_IN, 6,
s->handle, 0, 0, 0, 0, data[0]);
case CX2341X_ENC_SET_FRAME_SIZE:
return cx18_vapi(cx, CX18_CPU_SET_VIDEO_RESOLUTION, 3,
s->handle, data[1], data[0]);
case CX2341X_ENC_SET_STREAM_TYPE:
return cx18_vapi(cx, CX18_CPU_SET_STREAM_OUTPUT_TYPE, 2,
s->handle, data[0]);
case CX2341X_ENC_SET_ASPECT_RATIO:
return cx18_vapi(cx, CX18_CPU_SET_ASPECT_RATIO, 2,
s->handle, data[0]);
case CX2341X_ENC_SET_GOP_PROPERTIES:
return cx18_vapi(cx, CX18_CPU_SET_GOP_STRUCTURE, 3,
s->handle, data[0], data[1]);
case CX2341X_ENC_SET_GOP_CLOSURE:
return 0;
case CX2341X_ENC_SET_AUDIO_PROPERTIES:
return cx18_vapi(cx, CX18_CPU_SET_AUDIO_PARAMETERS, 2,
s->handle, data[0]);
case CX2341X_ENC_MUTE_AUDIO:
return cx18_vapi(cx, CX18_CPU_SET_AUDIO_MUTE, 2,
s->handle, data[0]);
case CX2341X_ENC_SET_BIT_RATE:
return cx18_vapi(cx, CX18_CPU_SET_VIDEO_RATE, 5,
s->handle, data[0], data[1], data[2], data[3]);
case CX2341X_ENC_MUTE_VIDEO:
return cx18_vapi(cx, CX18_CPU_SET_VIDEO_MUTE, 2,
s->handle, data[0]);
case CX2341X_ENC_SET_FRAME_DROP_RATE:
return cx18_vapi(cx, CX18_CPU_SET_SKIP_INPUT_FRAME, 2,
s->handle, data[0]);
case CX2341X_ENC_MISC:
return cx18_vapi(cx, CX18_CPU_SET_MISC_PARAMETERS, 4,
s->handle, data[0], data[1], data[2]);
case CX2341X_ENC_SET_DNR_FILTER_MODE:
cx->filter_mode = (data[0] & 3) | (data[1] << 2);
return cx18_set_filter_param(s);
case CX2341X_ENC_SET_DNR_FILTER_PROPS:
cx->spatial_strength = data[0];
cx->temporal_strength = data[1];
return cx18_set_filter_param(s);
case CX2341X_ENC_SET_SPATIAL_FILTER_TYPE:
return cx18_vapi(cx, CX18_CPU_SET_SPATIAL_FILTER_TYPE, 3,
s->handle, data[0], data[1]);
case CX2341X_ENC_SET_CORING_LEVELS:
return cx18_vapi(cx, CX18_CPU_SET_MEDIAN_CORING, 5,
s->handle, data[0], data[1], data[2], data[3]);
}
CX18_WARN("Unknown cmd %x\n", cmd);
return 0;
}
static int cx18_api_call(struct cx18 *cx, u32 cmd, int args, u32 data[])
{
const struct cx18_api_info *info = find_api_info(cmd);
u32 state, irq, req, ack, err;
struct cx18_mailbox __iomem *mb;
u32 __iomem *xpu_state;
wait_queue_head_t *waitq;
struct mutex *mb_lock;
long int timeout, ret;
int i;
char argstr[MAX_MB_ARGUMENTS*11+1];
if (info == NULL) {
CX18_WARN("unknown cmd %x\n", cmd);
return -EINVAL;
}
if (cx18_debug & CX18_DBGFLG_API) { /* only call u32arr2hex if needed */
if (cmd == CX18_CPU_DE_SET_MDL) {
if (cx18_debug & CX18_DBGFLG_HIGHVOL)
CX18_DEBUG_HI_API("%s\tcmd %#010x args%s\n",
info->name, cmd,
u32arr2hex(data, args, argstr));
} else
CX18_DEBUG_API("%s\tcmd %#010x args%s\n",
info->name, cmd,
u32arr2hex(data, args, argstr));
}
switch (info->rpu) {
case APU:
waitq = &cx->mb_apu_waitq;
mb_lock = &cx->epu2apu_mb_lock;
irq = IRQ_EPU_TO_APU;
mb = &cx->scb->epu2apu_mb;
xpu_state = &cx->scb->apu_state;
break;
case CPU:
waitq = &cx->mb_cpu_waitq;
mb_lock = &cx->epu2cpu_mb_lock;
irq = IRQ_EPU_TO_CPU;
mb = &cx->scb->epu2cpu_mb;
xpu_state = &cx->scb->cpu_state;
break;
default:
CX18_WARN("Unknown RPU (%d) for API call\n", info->rpu);
return -EINVAL;
}
mutex_lock(mb_lock);
/*
* Wait for an in-use mailbox to complete
*
* If the XPU is responding with Ack's, the mailbox shouldn't be in
* a busy state, since we serialize access to it on our end.
*
* If the wait for ack after sending a previous command was interrupted
* by a signal, we may get here and find a busy mailbox. After waiting,
* mark it "not busy" from our end, if the XPU hasn't ack'ed it still.
*/
state = cx18_readl(cx, xpu_state);
req = cx18_readl(cx, &mb->request);
timeout = msecs_to_jiffies(10);
ret = wait_event_timeout(*waitq,
(ack = cx18_readl(cx, &mb->ack)) == req,
timeout);
if (req != ack) {
/* waited long enough, make the mbox "not busy" from our end */
cx18_writel(cx, req, &mb->ack);
CX18_ERR("mbox was found stuck busy when setting up for %s; "
"clearing busy and trying to proceed\n", info->name);
} else if (ret != timeout)
CX18_DEBUG_API("waited %u msecs for busy mbox to be acked\n",
jiffies_to_msecs(timeout-ret));
/* Build the outgoing mailbox */
req = ((req & 0xfffffffe) == 0xfffffffe) ? 1 : req + 1;
cx18_writel(cx, cmd, &mb->cmd);
for (i = 0; i < args; i++)
cx18_writel(cx, data[i], &mb->args[i]);
cx18_writel(cx, 0, &mb->error);
cx18_writel(cx, req, &mb->request);
cx18_writel(cx, req - 1, &mb->ack); /* ensure ack & req are distinct */
/*
* Notify the XPU and wait for it to send an Ack back
*/
timeout = msecs_to_jiffies((info->flags & API_FAST) ? 10 : 20);
CX18_DEBUG_HI_IRQ("sending interrupt SW1: %x to send %s\n",
irq, info->name);
cx18_write_reg_expect(cx, irq, SW1_INT_SET, irq, irq);
ret = wait_event_timeout(
*waitq,
cx18_readl(cx, &mb->ack) == cx18_readl(cx, &mb->request),
timeout);
if (ret == 0) {
/* Timed out */
mutex_unlock(mb_lock);
CX18_DEBUG_WARN("sending %s timed out waiting %d msecs for RPU "
"acknowledgement\n",
info->name, jiffies_to_msecs(timeout));
return -EINVAL;
}
if (ret != timeout)
CX18_DEBUG_HI_API("waited %u msecs for %s to be acked\n",
jiffies_to_msecs(timeout-ret), info->name);
/* Collect data returned by the XPU */
for (i = 0; i < MAX_MB_ARGUMENTS; i++)
data[i] = cx18_readl(cx, &mb->args[i]);
err = cx18_readl(cx, &mb->error);
mutex_unlock(mb_lock);
/*
* Wait for XPU to perform extra actions for the caller in some cases.
* e.g. CX18_CPU_DE_RELEASE_MDL will cause the CPU to send all buffers
* back in a burst shortly thereafter
*/
if (info->flags & API_SLOW)
cx18_msleep_timeout(300, 0);
if (err)
CX18_DEBUG_API("mailbox error %08x for command %s\n", err,
info->name);
return err ? -EIO : 0;
}
static void epu_dma_done(struct cx18 *cx, struct cx18_epu_work_order *order)
{
u32 handle, mdl_ack_count, id;
struct cx18_mailbox *mb;
struct cx18_mdl_ack *mdl_ack;
struct cx18_stream *s;
struct cx18_buffer *buf;
int i;
mb = &order->mb;
handle = mb->args[0];
s = cx18_handle_to_stream(cx, handle);
if (s == NULL) {
CX18_WARN("Got DMA done notification for unknown/inactive"
" handle %d, %s mailbox seq no %d\n", handle,
(order->flags & CX18_F_EWO_MB_STALE_UPON_RECEIPT) ?
"stale" : "good", mb->request);
return;
}
mdl_ack_count = mb->args[2];
mdl_ack = order->mdl_ack;
for (i = 0; i < mdl_ack_count; i++, mdl_ack++) {
id = mdl_ack->id;
/*
* Simple integrity check for processing a stale (and possibly
* inconsistent mailbox): make sure the buffer id is in the
* valid range for the stream.
*
* We go through the trouble of dealing with stale mailboxes
* because most of the time, the mailbox data is still valid and
* unchanged (and in practice the firmware ping-pongs the
* two mdl_ack buffers so mdl_acks are not stale).
*
* There are occasions when we get a half changed mailbox,
* which this check catches for a handle & id mismatch. If the
* handle and id do correspond, the worst case is that we
* completely lost the old buffer, but pick up the new buffer
* early (but the new mdl_ack is guaranteed to be good in this
* case as the firmware wouldn't point us to a new mdl_ack until
* it's filled in).
*
* cx18_queue_get buf() will detect the lost buffers
* and send them back to q_free for fw rotation eventually.
*/
if ((order->flags & CX18_F_EWO_MB_STALE_UPON_RECEIPT) &&
!(id >= s->mdl_offset &&
id < (s->mdl_offset + s->buffers))) {
CX18_WARN("Fell behind! Ignoring stale mailbox with "
" inconsistent data. Lost buffer for mailbox "
"seq no %d\n", mb->request);
break;
}
buf = cx18_queue_get_buf(s, id, mdl_ack->data_used);
CX18_DEBUG_HI_DMA("DMA DONE for %s (buffer %d)\n", s->name, id);
if (buf == NULL) {
CX18_WARN("Could not find buf %d for stream %s\n",
id, s->name);
/* Put as many buffers as possible back into fw use */
cx18_stream_load_fw_queue(s);
continue;
}
if (s->type == CX18_ENC_STREAM_TYPE_TS && s->dvb.enabled) {
CX18_DEBUG_HI_DMA("TS recv bytesused = %d\n",
buf->bytesused);
dvb_dmx_swfilter(&s->dvb.demux, buf->buf,
buf->bytesused);
}
/* Put as many buffers as possible back into fw use */
cx18_stream_load_fw_queue(s);
/* Put back TS buffer, since it was removed from all queues */
if (s->type == CX18_ENC_STREAM_TYPE_TS)
cx18_stream_put_buf_fw(s, buf);
}
wake_up(&cx->dma_waitq);
if (s->id != -1)
wake_up(&s->waitq);
}
static int __devinit cx18_probe(struct pci_dev *pci_dev,
const struct pci_device_id *pci_id)
{
int retval = 0;
int i;
u32 devtype;
struct cx18 *cx;
/* FIXME - module parameter arrays constrain max instances */
i = atomic_inc_return(&cx18_instance) - 1;
if (i >= CX18_MAX_CARDS) {
printk(KERN_ERR "cx18: cannot manage card %d, driver has a "
"limit of 0 - %d\n", i, CX18_MAX_CARDS - 1);
return -ENOMEM;
}
cx = kzalloc(sizeof(struct cx18), GFP_ATOMIC);
if (cx == NULL) {
printk(KERN_ERR "cx18: cannot manage card %d, out of memory\n",
i);
return -ENOMEM;
}
cx->pci_dev = pci_dev;
cx->instance = i;
retval = v4l2_device_register(&pci_dev->dev, &cx->v4l2_dev);
if (retval) {
printk(KERN_ERR "cx18: v4l2_device_register of card %d failed"
"\n", cx->instance);
kfree(cx);
return retval;
}
snprintf(cx->v4l2_dev.name, sizeof(cx->v4l2_dev.name), "cx18-%d",
cx->instance);
CX18_INFO("Initializing card %d\n", cx->instance);
cx18_process_options(cx);
if (cx->options.cardtype == -1) {
retval = -ENODEV;
goto err;
}
retval = cx18_init_struct1(cx);
if (retval)
goto err;
CX18_DEBUG_INFO("base addr: 0x%08x\n", cx->base_addr);
/* PCI Device Setup */
retval = cx18_setup_pci(cx, pci_dev, pci_id);
if (retval != 0)
goto free_workqueues;
/* map io memory */
CX18_DEBUG_INFO("attempting ioremap at 0x%08x len 0x%08x\n",
cx->base_addr + CX18_MEM_OFFSET, CX18_MEM_SIZE);
cx->enc_mem = ioremap_nocache(cx->base_addr + CX18_MEM_OFFSET,
CX18_MEM_SIZE);
if (!cx->enc_mem) {
CX18_ERR("ioremap failed. Can't get a window into CX23418 "
"memory and register space\n");
CX18_ERR("Each capture card with a CX23418 needs 64 MB of "
"vmalloc address space for the window\n");
CX18_ERR("Check the output of 'grep Vmalloc /proc/meminfo'\n");
CX18_ERR("Use the vmalloc= kernel command line option to set "
"VmallocTotal to a larger value\n");
retval = -ENOMEM;
goto free_mem;
}
cx->reg_mem = cx->enc_mem + CX18_REG_OFFSET;
devtype = cx18_read_reg(cx, 0xC72028);
switch (devtype & 0xff000000) {
case 0xff000000:
CX18_INFO("cx23418 revision %08x (A)\n", devtype);
break;
case 0x01000000:
CX18_INFO("cx23418 revision %08x (B)\n", devtype);
break;
default:
CX18_INFO("cx23418 revision %08x (Unknown)\n", devtype);
break;
}
cx18_init_power(cx, 1);
cx18_init_memory(cx);
cx->scb = (struct cx18_scb __iomem *)(cx->enc_mem + SCB_OFFSET);
cx18_init_scb(cx);
cx18_gpio_init(cx);
/* Initialize integrated A/V decoder early to set PLLs, just in case */
retval = cx18_av_probe(cx);
if (retval) {
CX18_ERR("Could not register A/V decoder subdevice\n");
goto free_map;
}
/* Initialize GPIO Reset Controller to do chip resets during i2c init */
if (cx->card->hw_all & CX18_HW_GPIO_RESET_CTRL) {
if (cx18_gpio_register(cx, CX18_HW_GPIO_RESET_CTRL) != 0)
CX18_WARN("Could not register GPIO reset controller"
"subdevice; proceeding anyway.\n");
else
cx->hw_flags |= CX18_HW_GPIO_RESET_CTRL;
}
/* active i2c */
CX18_DEBUG_INFO("activating i2c...\n");
retval = init_cx18_i2c(cx);
if (retval) {
CX18_ERR("Could not initialize i2c\n");
goto free_map;
}
if (cx->card->hw_all & CX18_HW_TVEEPROM) {
/* Based on the model number the cardtype may be changed.
The PCI IDs are not always reliable. */
const struct cx18_card *orig_card = cx->card;
cx18_process_eeprom(cx);
if (cx->card != orig_card) {
/* Changed the cardtype; re-reset the I2C chips */
cx18_gpio_init(cx);
cx18_call_hw(cx, CX18_HW_GPIO_RESET_CTRL,
core, reset, (u32) CX18_GPIO_RESET_I2C);
}
}
if (cx->card->comment)
CX18_INFO("%s", cx->card->comment);
if (cx->card->v4l2_capabilities == 0) {
retval = -ENODEV;
goto free_i2c;
}
cx18_init_memory(cx);
cx18_init_scb(cx);
/* Register IRQ */
retval = request_irq(cx->pci_dev->irq, cx18_irq_handler,
IRQF_SHARED | IRQF_DISABLED,
cx->v4l2_dev.name, (void *)cx);
if (retval) {
CX18_ERR("Failed to register irq %d\n", retval);
goto free_i2c;
}
if (cx->std == 0)
cx->std = V4L2_STD_NTSC_M;
if (cx->options.tuner == -1) {
for (i = 0; i < CX18_CARD_MAX_TUNERS; i++) {
if ((cx->std & cx->card->tuners[i].std) == 0)
continue;
cx->options.tuner = cx->card->tuners[i].tuner;
break;
}
}
/* if no tuner was found, then pick the first tuner in the card list */
if (cx->options.tuner == -1 && cx->card->tuners[0].std) {
cx->std = cx->card->tuners[0].std;
if (cx->std & V4L2_STD_PAL)
cx->std = V4L2_STD_PAL_BG | V4L2_STD_PAL_H;
else if (cx->std & V4L2_STD_NTSC)
cx->std = V4L2_STD_NTSC_M;
else if (cx->std & V4L2_STD_SECAM)
cx->std = V4L2_STD_SECAM_L;
cx->options.tuner = cx->card->tuners[0].tuner;
}
if (cx->options.radio == -1)
cx->options.radio = (cx->card->radio_input.audio_type != 0);
/* The card is now fully identified, continue with card-specific
initialization. */
cx18_init_struct2(cx);
cx18_init_subdevs(cx);
if (cx->std & V4L2_STD_525_60)
cx->is_60hz = 1;
else
cx->is_50hz = 1;
cx2341x_handler_set_50hz(&cx->cxhdl, !cx->is_60hz);
if (cx->options.radio > 0)
cx->v4l2_cap |= V4L2_CAP_RADIO;
if (cx->options.tuner > -1) {
struct tuner_setup setup;
setup.addr = ADDR_UNSET;
setup.type = cx->options.tuner;
setup.mode_mask = T_ANALOG_TV; /* matches TV tuners */
setup.tuner_callback = (setup.type == TUNER_XC2028) ?
cx18_reset_tuner_gpio : NULL;
cx18_call_all(cx, tuner, s_type_addr, &setup);
if (setup.type == TUNER_XC2028) {
static struct xc2028_ctrl ctrl = {
.fname = XC2028_DEFAULT_FIRMWARE,
.max_len = 64,
};
struct v4l2_priv_tun_config cfg = {
.tuner = cx->options.tuner,
.priv = &ctrl,
};
cx18_call_all(cx, tuner, s_config, &cfg);
}
}
/* The tuner is fixed to the standard. The other inputs (e.g. S-Video)
are not. */
cx->tuner_std = cx->std;
if (cx->std == V4L2_STD_ALL)
cx->std = V4L2_STD_NTSC_M;
retval = cx18_streams_setup(cx);
if (retval) {
CX18_ERR("Error %d setting up streams\n", retval);
goto free_irq;
}
retval = cx18_streams_register(cx);
if (retval) {
CX18_ERR("Error %d registering devices\n", retval);
goto free_streams;
}
CX18_INFO("Initialized card: %s\n", cx->card_name);
/* Load cx18 submodules (cx18-alsa) */
request_modules(cx);
return 0;
free_streams:
cx18_streams_cleanup(cx, 1);
free_irq:
free_irq(cx->pci_dev->irq, (void *)cx);
free_i2c:
exit_cx18_i2c(cx);
free_map:
cx18_iounmap(cx);
free_mem:
release_mem_region(cx->base_addr, CX18_MEM_SIZE);
free_workqueues:
destroy_workqueue(cx->in_work_queue);
err:
if (retval == 0)
retval = -ENODEV;
CX18_ERR("Error %d on initialization\n", retval);
v4l2_device_unregister(&cx->v4l2_dev);
kfree(cx);
return retval;
}
int cx18_init_on_first_open(struct cx18 *cx)
{
int video_input;
int fw_retry_count = 3;
struct v4l2_frequency vf;
struct cx18_open_id fh;
v4l2_std_id std;
fh.cx = cx;
if (test_bit(CX18_F_I_FAILED, &cx->i_flags))
return -ENXIO;
if (test_and_set_bit(CX18_F_I_INITED, &cx->i_flags))
return 0;
while (--fw_retry_count > 0) {
/* load firmware */
if (cx18_firmware_init(cx) == 0)
break;
if (fw_retry_count > 1)
CX18_WARN("Retry loading firmware\n");
}
if (fw_retry_count == 0) {
set_bit(CX18_F_I_FAILED, &cx->i_flags);
return -ENXIO;
}
set_bit(CX18_F_I_LOADED_FW, &cx->i_flags);
/*
* Init the firmware twice to work around a silicon bug
* with the digital TS.
*
* The second firmware load requires us to normalize the APU state,
* or the audio for the first analog capture will be badly incorrect.
*
* I can't seem to call APU_RESETAI and have it succeed without the
* APU capturing audio, so we start and stop it here to do the reset
*/
/* MPEG Encoding, 224 kbps, MPEG Layer II, 48 ksps */
cx18_vapi(cx, CX18_APU_START, 2, CX18_APU_ENCODING_METHOD_MPEG|0xb9, 0);
cx18_vapi(cx, CX18_APU_RESETAI, 0);
cx18_vapi(cx, CX18_APU_STOP, 1, CX18_APU_ENCODING_METHOD_MPEG);
fw_retry_count = 3;
while (--fw_retry_count > 0) {
/* load firmware */
if (cx18_firmware_init(cx) == 0)
break;
if (fw_retry_count > 1)
CX18_WARN("Retry loading firmware\n");
}
if (fw_retry_count == 0) {
set_bit(CX18_F_I_FAILED, &cx->i_flags);
return -ENXIO;
}
/*
* The second firmware load requires us to normalize the APU state,
* or the audio for the first analog capture will be badly incorrect.
*
* I can't seem to call APU_RESETAI and have it succeed without the
* APU capturing audio, so we start and stop it here to do the reset
*/
/* MPEG Encoding, 224 kbps, MPEG Layer II, 48 ksps */
cx18_vapi(cx, CX18_APU_START, 2, CX18_APU_ENCODING_METHOD_MPEG|0xb9, 0);
cx18_vapi(cx, CX18_APU_RESETAI, 0);
cx18_vapi(cx, CX18_APU_STOP, 1, CX18_APU_ENCODING_METHOD_MPEG);
/* Init the A/V decoder, if it hasn't been already */
v4l2_subdev_call(cx->sd_av, core, load_fw);
vf.tuner = 0;
vf.type = V4L2_TUNER_ANALOG_TV;
vf.frequency = 6400; /* the tuner 'baseline' frequency */
/* Set initial frequency. For PAL/SECAM broadcasts no
'default' channel exists AFAIK. */
if (cx->std == V4L2_STD_NTSC_M_JP)
vf.frequency = 1460; /* ch. 1 91250*16/1000 */
else if (cx->std & V4L2_STD_NTSC_M)
vf.frequency = 1076; /* ch. 4 67250*16/1000 */
video_input = cx->active_input;
cx->active_input++; /* Force update of input */
cx18_s_input(NULL, &fh, video_input);
/* Let the VIDIOC_S_STD ioctl do all the work, keeps the code
in one place. */
cx->std++; /* Force full standard initialization */
std = (cx->tuner_std == V4L2_STD_ALL) ? V4L2_STD_NTSC_M : cx->tuner_std;
cx18_s_std(NULL, &fh, &std);
cx18_s_frequency(NULL, &fh, &vf);
return 0;
}
static void cx18_cancel_in_work_orders(struct cx18 *cx)
{
int i;
for (i = 0; i < CX18_MAX_IN_WORK_ORDERS; i++)
cancel_work_sync(&cx->in_work_order[i].work);
}
static int cx18_api_call(struct cx18 *cx, u32 cmd, int args, u32 data[])
{
const struct cx18_api_info *info = find_api_info(cmd);
u32 state = 0, irq = 0, req, oldreq, err;
struct cx18_mailbox __iomem *mb;
wait_queue_head_t *waitq;
int timeout = 100;
int cnt = 0;
int sig = 0;
int i;
if (info == NULL) {
CX18_WARN("unknown cmd %x\n", cmd);
return -EINVAL;
}
if (cmd == CX18_CPU_DE_SET_MDL)
CX18_DEBUG_HI_API("%s\n", info->name);
else
CX18_DEBUG_API("%s\n", info->name);
cx18_setup_page(cx, SCB_OFFSET);
mb = cx18_mb_is_complete(cx, info->rpu, &state, &irq, &req);
if (mb == NULL) {
CX18_ERR("mb %s busy\n", info->name);
return -EBUSY;
}
oldreq = req - 1;
cx18_writel(cx, cmd, &mb->cmd);
for (i = 0; i < args; i++)
cx18_writel(cx, data[i], &mb->args[i]);
cx18_writel(cx, 0, &mb->error);
cx18_writel(cx, req, &mb->request);
switch (info->rpu) {
case APU: waitq = &cx->mb_apu_waitq; break;
case CPU: waitq = &cx->mb_cpu_waitq; break;
case EPU: waitq = &cx->mb_epu_waitq; break;
case HPU: waitq = &cx->mb_hpu_waitq; break;
default: return -EINVAL;
}
if (info->flags & API_FAST)
timeout /= 2;
cx18_write_reg(cx, irq, SW1_INT_SET);
while (!sig && cx18_readl(cx, &mb->ack) != cx18_readl(cx, &mb->request)
&& cnt < 660) {
if (cnt > 200 && !in_atomic())
sig = cx18_msleep_timeout(10, 1);
cnt++;
}
if (sig)
return -EINTR;
if (cnt == 660) {
cx18_writel(cx, oldreq, &mb->request);
CX18_ERR("mb %s failed\n", info->name);
return -EINVAL;
}
for (i = 0; i < MAX_MB_ARGUMENTS; i++)
data[i] = cx18_readl(cx, &mb->args[i]);
err = cx18_readl(cx, &mb->error);
if (!in_atomic() && (info->flags & API_SLOW))
cx18_msleep_timeout(300, 0);
if (err)
CX18_DEBUG_API("mailbox error %08x for command %s\n", err,
info->name);
return err ? -EIO : 0;
}
static int __devinit cx18_probe(struct pci_dev *pci_dev,
const struct pci_device_id *pci_id)
{
int retval = 0;
int i;
u32 devtype;
struct cx18 *cx;
i = atomic_inc_return(&cx18_instance) - 1;
if (i >= CX18_MAX_CARDS) {
printk(KERN_ERR "cx18: cannot manage card %d, driver has a "
"limit of 0 - %d\n", i, CX18_MAX_CARDS - 1);
return -ENOMEM;
}
cx = kzalloc(sizeof(struct cx18), GFP_ATOMIC);
if (cx == NULL) {
printk(KERN_ERR "cx18: cannot manage card %d, out of memory\n",
i);
return -ENOMEM;
}
cx->pci_dev = pci_dev;
cx->instance = i;
retval = v4l2_device_register(&pci_dev->dev, &cx->v4l2_dev);
if (retval) {
printk(KERN_ERR "cx18: v4l2_device_register of card %d failed"
"\n", cx->instance);
kfree(cx);
return retval;
}
snprintf(cx->v4l2_dev.name, sizeof(cx->v4l2_dev.name), "cx18-%d",
cx->instance);
CX18_INFO("Initializing card %d\n", cx->instance);
cx18_process_options(cx);
if (cx->options.cardtype == -1) {
retval = -ENODEV;
goto err;
}
retval = cx18_init_struct1(cx);
if (retval)
goto err;
CX18_DEBUG_INFO("base addr: 0x%08x\n", cx->base_addr);
retval = cx18_setup_pci(cx, pci_dev, pci_id);
if (retval != 0)
goto free_workqueues;
CX18_DEBUG_INFO("attempting ioremap at 0x%08x len 0x%08x\n",
cx->base_addr + CX18_MEM_OFFSET, CX18_MEM_SIZE);
cx->enc_mem = ioremap_nocache(cx->base_addr + CX18_MEM_OFFSET,
CX18_MEM_SIZE);
if (!cx->enc_mem) {
CX18_ERR("ioremap failed, perhaps increasing __VMALLOC_RESERVE in page.h\n");
CX18_ERR("or disabling CONFIG_HIGHMEM4G into the kernel would help\n");
retval = -ENOMEM;
goto free_mem;
}
cx->reg_mem = cx->enc_mem + CX18_REG_OFFSET;
devtype = cx18_read_reg(cx, 0xC72028);
switch (devtype & 0xff000000) {
case 0xff000000:
CX18_INFO("cx23418 revision %08x (A)\n", devtype);
break;
case 0x01000000:
CX18_INFO("cx23418 revision %08x (B)\n", devtype);
break;
default:
CX18_INFO("cx23418 revision %08x (Unknown)\n", devtype);
break;
}
cx18_init_power(cx, 1);
cx18_init_memory(cx);
cx->scb = (struct cx18_scb __iomem *)(cx->enc_mem + SCB_OFFSET);
cx18_init_scb(cx);
cx18_gpio_init(cx);
retval = cx18_av_probe(cx);
if (retval) {
CX18_ERR("Could not register A/V decoder subdevice\n");
goto free_map;
}
cx18_call_hw(cx, CX18_HW_418_AV, core, init, 0);
if (cx->card->hw_all & CX18_HW_GPIO_RESET_CTRL) {
if (cx18_gpio_register(cx, CX18_HW_GPIO_RESET_CTRL) != 0)
CX18_WARN("Could not register GPIO reset controller"
"subdevice; proceeding anyway.\n");
else
cx->hw_flags |= CX18_HW_GPIO_RESET_CTRL;
}
CX18_DEBUG_INFO("activating i2c...\n");
retval = init_cx18_i2c(cx);
if (retval) {
CX18_ERR("Could not initialize i2c\n");
goto free_map;
}
if (cx->card->hw_all & CX18_HW_TVEEPROM) {
cx18_process_eeprom(cx);
}
if (cx->card->comment)
CX18_INFO("%s", cx->card->comment);
if (cx->card->v4l2_capabilities == 0) {
retval = -ENODEV;
goto free_i2c;
}
cx18_init_memory(cx);
cx18_init_scb(cx);
retval = request_irq(cx->pci_dev->irq, cx18_irq_handler,
IRQF_SHARED | IRQF_DISABLED,
cx->v4l2_dev.name, (void *)cx);
if (retval) {
CX18_ERR("Failed to register irq %d\n", retval);
goto free_i2c;
}
if (cx->std == 0)
cx->std = V4L2_STD_NTSC_M;
if (cx->options.tuner == -1) {
for (i = 0; i < CX18_CARD_MAX_TUNERS; i++) {
if ((cx->std & cx->card->tuners[i].std) == 0)
continue;
cx->options.tuner = cx->card->tuners[i].tuner;
break;
}
}
if (cx->options.tuner == -1 && cx->card->tuners[0].std) {
cx->std = cx->card->tuners[0].std;
if (cx->std & V4L2_STD_PAL)
cx->std = V4L2_STD_PAL_BG | V4L2_STD_PAL_H;
else if (cx->std & V4L2_STD_NTSC)
cx->std = V4L2_STD_NTSC_M;
else if (cx->std & V4L2_STD_SECAM)
cx->std = V4L2_STD_SECAM_L;
cx->options.tuner = cx->card->tuners[0].tuner;
}
if (cx->options.radio == -1)
cx->options.radio = (cx->card->radio_input.audio_type != 0);
cx18_init_struct2(cx);
cx18_init_subdevs(cx);
if (cx->std & V4L2_STD_525_60)
cx->is_60hz = 1;
else
cx->is_50hz = 1;
cx->params.video_gop_size = cx->is_60hz ? 15 : 12;
if (cx->options.radio > 0)
cx->v4l2_cap |= V4L2_CAP_RADIO;
if (cx->options.tuner > -1) {
struct tuner_setup setup;
setup.addr = ADDR_UNSET;
setup.type = cx->options.tuner;
setup.mode_mask = T_ANALOG_TV;
setup.tuner_callback = (setup.type == TUNER_XC2028) ?
cx18_reset_tuner_gpio : NULL;
cx18_call_all(cx, tuner, s_type_addr, &setup);
if (setup.type == TUNER_XC2028) {
static struct xc2028_ctrl ctrl = {
.fname = XC2028_DEFAULT_FIRMWARE,
.max_len = 64,
};
struct v4l2_priv_tun_config cfg = {
.tuner = cx->options.tuner,
.priv = &ctrl,
};
cx18_call_all(cx, tuner, s_config, &cfg);
}
}
cx->tuner_std = cx->std;
retval = cx18_streams_setup(cx);
if (retval) {
CX18_ERR("Error %d setting up streams\n", retval);
goto free_irq;
}
retval = cx18_streams_register(cx);
if (retval) {
CX18_ERR("Error %d registering devices\n", retval);
goto free_streams;
}
CX18_INFO("Initialized card: %s\n", cx->card_name);
return 0;
free_streams:
cx18_streams_cleanup(cx, 1);
free_irq:
free_irq(cx->pci_dev->irq, (void *)cx);
free_i2c:
exit_cx18_i2c(cx);
free_map:
cx18_iounmap(cx);
free_mem:
release_mem_region(cx->base_addr, CX18_MEM_SIZE);
free_workqueues:
destroy_workqueue(cx->in_work_queue);
destroy_workqueue(cx->out_work_queue);
err:
if (retval == 0)
retval = -ENODEV;
CX18_ERR("Error %d on initialization\n", retval);
v4l2_device_unregister(&cx->v4l2_dev);
kfree(cx);
return retval;
}
int cx18_init_on_first_open(struct cx18 *cx)
{
int video_input;
int fw_retry_count = 3;
struct v4l2_frequency vf;
struct cx18_open_id fh;
fh.cx = cx;
if (test_bit(CX18_F_I_FAILED, &cx->i_flags))
return -ENXIO;
if (test_and_set_bit(CX18_F_I_INITED, &cx->i_flags))
return 0;
while (--fw_retry_count > 0) {
if (cx18_firmware_init(cx) == 0)
break;
if (fw_retry_count > 1)
CX18_WARN("Retry loading firmware\n");
}
if (fw_retry_count == 0) {
set_bit(CX18_F_I_FAILED, &cx->i_flags);
return -ENXIO;
}
set_bit(CX18_F_I_LOADED_FW, &cx->i_flags);
cx18_vapi(cx, CX18_APU_START, 2, CX18_APU_ENCODING_METHOD_MPEG|0xb9, 0);
cx18_vapi(cx, CX18_APU_RESETAI, 0);
cx18_vapi(cx, CX18_APU_STOP, 1, CX18_APU_ENCODING_METHOD_MPEG);
fw_retry_count = 3;
while (--fw_retry_count > 0) {
if (cx18_firmware_init(cx) == 0)
break;
if (fw_retry_count > 1)
CX18_WARN("Retry loading firmware\n");
}
if (fw_retry_count == 0) {
set_bit(CX18_F_I_FAILED, &cx->i_flags);
return -ENXIO;
}
cx18_vapi(cx, CX18_APU_START, 2, CX18_APU_ENCODING_METHOD_MPEG|0xb9, 0);
cx18_vapi(cx, CX18_APU_RESETAI, 0);
cx18_vapi(cx, CX18_APU_STOP, 1, CX18_APU_ENCODING_METHOD_MPEG);
v4l2_subdev_call(cx->sd_av, core, load_fw);
vf.tuner = 0;
vf.type = V4L2_TUNER_ANALOG_TV;
vf.frequency = 6400;
if (cx->std == V4L2_STD_NTSC_M_JP)
vf.frequency = 1460;
else if (cx->std & V4L2_STD_NTSC_M)
vf.frequency = 1076;
video_input = cx->active_input;
cx->active_input++;
cx18_s_input(NULL, &fh, video_input);
cx->std++;
cx18_s_std(NULL, &fh, &cx->tuner_std);
cx18_s_frequency(NULL, &fh, &vf);
return 0;
}
static void cx18_cancel_in_work_orders(struct cx18 *cx)
{
int i;
for (i = 0; i < CX18_MAX_IN_WORK_ORDERS; i++)
cancel_work_sync(&cx->in_work_order[i].work);
}
