Ejemplo n.º 1
0
/*******************************************************************************
* Function Name: void processCapsense( void )
********************************************************************************
*
* Summary:
*  This function steps through each capSense sensor one by one and captures its state.
*
*  For the humidity and humidity reference capacitors, the raw counts are stored 
*  and then the humidity is calculated.
*******************************************************************************/
void processCapSense(void)
{
    static uint8  state = B0;               /* CapSense sensor state machine to cycle through sensors */
    static uint16 humidityRawCounts;        /* Raw count from CapSense Component for the humidity sensor */
    static uint16 humidityRefRawCounts;     /* Raw count from CapSense Component for the Reference capacitor */
    static uint8  buttonValPrev = 0x00;     /* Previous CapSense button state */
    
    if(!CapSense_IsBusy())
    {
        switch(state) {
            case B0: /* Process Button 0, Scan Button 1 */
                CapSense_ProcessWidget(CapSense_BUTTON0_WDGT_ID);
                if(CapSense_IsWidgetActive(CapSense_BUTTON0_WDGT_ID))
                {
                    if(capLedBase == false)
                    {
                        CBLED0_Write(LEDON);
                        
                    }      
                    LocData.buttonVal |= (BVAL_B0_MASK);
                }
                else
                {
                    if(capLedBase == false)
                    {
                        CBLED0_Write(LEDOFF);
                    }
                    LocData.buttonVal &= (~BVAL_B0_MASK);
                }
                CapSense_SetupWidget(CapSense_BUTTON1_WDGT_ID);
                state++;
                break;
            case B1: /* Process Button 1, Scan Button 2 */
                CapSense_ProcessWidget(CapSense_BUTTON1_WDGT_ID);
                if(CapSense_IsWidgetActive(CapSense_BUTTON1_WDGT_ID))
                {
                    if(capLedBase == false)
                    {
                        CBLED1_Write(LEDON);
                    }
                    LocData.buttonVal |= (BVAL_B1_MASK);
                }
                else
                {
                    if(capLedBase == false)
                    {
                        CBLED1_Write(LEDOFF);
                    }
                    LocData.buttonVal &= (~BVAL_B1_MASK);
                }
                
                CapSense_SetupWidget(CapSense_BUTTON2_WDGT_ID);
                state++;                
                break;
            case B2: /* Process Button 2, Scan Button 3 */
                CapSense_ProcessWidget(CapSense_BUTTON2_WDGT_ID);
                if(CapSense_IsWidgetActive(CapSense_BUTTON2_WDGT_ID))
                {
                    if(capLedBase == false)
                    {
                        CBLED2_Write(LEDON);
                    }
                    LocData.buttonVal |= (BVAL_B2_MASK);
                }
                else
                {
                    if(capLedBase == false)
                    {
                        CBLED2_Write(LEDOFF);
                    }
                    LocData.buttonVal &= (~BVAL_B2_MASK);
                }
                CapSense_SetupWidget(CapSense_BUTTON3_WDGT_ID);
                state++;
                break;
            case B3: /* Process Button 3, Scan Proximity */
                CapSense_ProcessWidget(CapSense_BUTTON3_WDGT_ID);
                if(CapSense_IsWidgetActive(CapSense_BUTTON3_WDGT_ID))
                {
                    if(capLedBase == false)
                    {
                        CBLED3_Write(LEDON);
                    }
                    LocData.buttonVal |= (BVAL_B3_MASK);
                }
                else
                {
                    if(capLedBase == false)
                    {
                        CBLED3_Write(LEDOFF);
                    }
                    LocData.buttonVal &= (~BVAL_B3_MASK);
                }
                
                /* Now that butons have all been processed, set interrupt state */
                if((LocData.buttonVal & BVAL_ALLB_MASK) != buttonValPrev) /* At least 1 CapSense button state changed */
                {
                    CSINTR_Write(1);
                    buttonValPrev = (LocData.buttonVal & BVAL_ALLB_MASK);
                }
                
                /* Setup Proximity scan */
                CapSense_SetupWidget(CapSense_PROXIMITY0_WDGT_ID);
                state++;
                break;      
            case PROX: /* Process Proximity, Scan Humidity */
                CapSense_ProcessWidget(CapSense_PROXIMITY0_WDGT_ID);
                if(CapSense_IsWidgetActive(CapSense_PROXIMITY0_WDGT_ID))
                {
                    PROXLED_Write(LEDON);
                    LocData.buttonVal |= (BVAL_PROX_MASK);
                }
                else
                {
                    PROXLED_Write(LEDOFF);
                    LocData.buttonVal &= (~BVAL_PROX_MASK);
                }
                CapSense_SetupWidget(CapSense_HUMIDITY_WDGT_ID);
                state++;
                break;
            case HUM: /* Process Humidity, Scan Button 0  and go back to start of loop */                
                humidityRawCounts =    CapSense_HUMIDITY_SNS0_RAW0_VALUE; 
                humidityRefRawCounts = CapSense_HUMIDITY_SNS1_RAW0_VALUE;
                /* Convert raw counts to capacitance */
                capacitance = CalculateCapacitance(humidityRawCounts, humidityRefRawCounts);
                /* Calculate humidity */
                humidity = CalculateHumidity(capacitance); 
                LocData.humidity = ((float32)(humidity))/10.0;
                CapSense_SetupWidget(CapSense_BUTTON0_WDGT_ID);
                state=0;
                break;
        } /* End of CapSense Switch statement */
        #ifdef ENABLE_TUNER
        CapSense_RunTuner();
        #endif
        CapSense_Scan();
    }
}
Ejemplo n.º 2
0
int main()
{
    
    CyDelay(200);

    uint16 Counts=0;            // ADC value (0 to 4095) right shifted by 6 which gives
                                // us 0 to 63 to be used to simulate actual temperature
    uint16 TempSet = 2400;      // Temperature set default value (left justified) 24 deg
    uint16 DisplayTemp = 0;     // The combined sum of desired temp and actual temp
    
    uint16 bleTemp = 0;         // Temperature sent to BLE module
    uint16 bleTempSet = 0;      // Temperature set value sent to BLE module
    
    uint8 button0 = 0;      // Declare CapSense button name button0
    uint8 button1 = 0;      // Declare CapSense button name button1
    uint8 firstpress0 = 0;  // Detects a transition of button1 from 0 to 1
    uint8 firstpress1 = 0;  // Detects a transition of button1 from 0 to 1
    
    int buttonPrevious = 1;

    CyGlobalIntEnable;
    
    ADC_Start();        // Starts the ADC component
    ADC_StartConvert(); // The ADC conversion process begins
    LCD_Start();        // Start the LCD component 
    
    CapSense_Start();
    CapSense_ScanAllWidgets();
    
    LCD_WritePixel(LCD_COLON, TRUE);
       
    ResetTimer_Start();
    sendBootload_StartEx(StartBootload_ISR);
    
    BLEIOT_Start();
    
    /* Initialize temperuature values out of range so that main loop update is triggered */
    BLEIOT_updateTemperature(10000);
    BLEIOT_updatePot(100);    
       
    for(;;)
    {
        
        /* Turn BLE on/off with button press */
        if(buttonPrevious && (Button_Read() == 0))
        {          
            if(BLEIOT_remote.bleState == BLEIOT_BLEOFF)
            {
                BLEIOT_updateBleState(BLEIOT_BLEON);  
            }
            else
            {
                BLEIOT_updateBleState(BLEIOT_BLEOFF);
            }
            
        }
        buttonPrevious = Button_Read();
           
        /* Local Thermostat Operation */
        /* ADC */
        // Read the ADC, shift right by 6 (i.e. divide by 64)
        // and store result in Counts
        Counts = ADC_GetResult16(POT_CHAN);
        Counts = Counts >> 6;

        /* CapSense */
        if (!CapSense_IsBusy())
        {
            // Check Button states and store
            CapSense_ProcessAllWidgets();
            if(CapSense_IsWidgetActive(CapSense_BUTTON0_WDGT_ID))
            {
                button0 = 1;
            }
            else
            {
                button0 = 0;
            }
            if(CapSense_IsWidgetActive(CapSense_BUTTON1_WDGT_ID))
            {
                button1 = 1;
            }
            else
            {
                button1 = 0;
            }
            
            // Light LEDs Based on Capsense buttons
            LED_CS0_Write(~button0);
            LED_CS1_Write(~button1);
            
            // Check for button touchdown transitions
            if (button0 == 1)
            {
                if(firstpress0 == 0) // Touchdown event
                {
                    firstpress0 = 1; // Remember button0 was pressed
                    TempSet = TempSet + 100; // Increment Temp by 1 deg
                }
            }
            else
            {
                firstpress0 = 0; // Button released
            }
            if (button1 == 1)
            {
                if(firstpress1 == 0) // Touchdown event
                {
                    firstpress1 = 1; // Remember button0 was pressed                   
                    TempSet = TempSet - 100; // Decrement Temp by 1 deg
                }
            }
            else
            {
                firstpress1 = 0; // Button released
            }
                 
            CapSense_ScanAllWidgets();  // Start Next Scan
        }
     
        /* Warning LEDs and Buzzer */
        if((Counts * 100) < TempSet)    // Temperature Cold
        {
            LED_Blue_Write(LED_ON);     // Blue On
            LED_Green_Write(LED_OFF);   // Green Off
            LED_Red_Write(LED_OFF);     // Red Off
            PWM_Stop(); // Buzzer Off
        }
        else if ((Counts * 100) <= (TempSet + 500))  // Temperature OK
        {
            LED_Blue_Write(LED_OFF);    // Blue Off
            LED_Green_Write(LED_ON);    // Green On
            LED_Red_Write(LED_OFF);     // Red Off
            PWM_Stop();// Buzzer Off
        }
        else // Tempearture too high
        {
            LED_Blue_Write(LED_OFF);    // Blue Off
            LED_Green_Write(LED_OFF);   // Green Off
            LED_Red_Write(LED_ON);      // Red On
            PWM_Start(); // Buzzer On
        }
    
        /* LCD Display */
        DisplayTemp = TempSet + Counts;
        LCD_Write7SegNumber_0(DisplayTemp, POS, MODE);        
    
        
        /* BLE operation - do only if BLE is not off */    
        if(BLEIOT_remote.bleState != BLEIOT_BLEOFF)
        {
            /* Send new temperature data to the BLE module */
            if(bleTemp != Counts)
            {
                bleTemp = Counts;
                BLEIOT_updatePot(bleTemp);
            }
            if(bleTempSet != TempSet)
            {
                bleTempSet = TempSet;
                /* Scale set temperature down to whole number of  degrees */
                BLEIOT_updateTemperature(TempSet / 100); 
            }     
                       
            /* Get new data from the BLE module */
            /* LED0 is used for temperature changes */
            if(BLEIOT_getDirtyFlags() & BLEIOT_FLAG_LED0)
            {
                /* Update local variable copy and clear dirty flag */
                BLEIOT_updateLed0(BLEIOT_remote.led0); 
                if(BLEIOT_local.led0 == UP)
                {
                    TempSet = TempSet + 100; // Increment Temp by 1 deg
                }
                else if (BLEIOT_local.led0 == DOWN)
                {
                    TempSet = TempSet - 100; // Decrement Temp by 1 deg
                }
            }
        } /* End of !BLEOFF state operations */
    } /* End of superloop */
} /* End of main */