/*
================
FS_InitFilesystem
Called only at inital startup, not when the filesystem
is resetting due to a game change
================
*/
void FS_InitFilesystem( void ) {
// allow command line parms to override our defaults
// we don't have to specially handle this, because normal command
// line variable sets happen before the filesystem
// has been initialized
//
// UPDATE: BTO (VV)
// we have to specially handle this, because normal command
// line variable sets don't happen until after the filesystem
// has already been initialized
Com_StartupVariable( "fs_cdpath" );
Com_StartupVariable( "fs_basepath" );
Com_StartupVariable( "fs_game" );
Com_StartupVariable( "fs_copyfiles" );
Com_StartupVariable( "fs_restrict" );
// try to start up normally
FS_Startup( BASEGAME );
initialized = qtrue;
// see if we are going to allow add-ons
FS_SetRestrictions();
// if we can't find default.cfg, assume that the paths are
// busted and error out now, rather than getting an unreadable
// graphics screen when the font fails to load
if ( FS_ReadFile( "default.cfg", NULL ) <= 0 ) {
Com_Error( ERR_FATAL, "Couldn't load default.cfg" );
}
}
/*
================
FS_InitFilesystem
Called only at inital startup, not when the filesystem
is resetting due to a game change
================
*/
void FS_InitFilesystem( void ) {
// allow command line parms to override our defaults
// we have to specially handle this, because normal command
// line variable sets don't happen until after the filesystem
// has already been initialized
Com_StartupVariable( "fs_cdpath" );
Com_StartupVariable( "fs_basepath" );
Com_StartupVariable( "fs_homepath" );
Com_StartupVariable( "fs_game" );
Com_StartupVariable( "fs_copyfiles" );
// try to start up normally
FS_Startup( BASEGAME );
initialized = qtrue;
// if we can't find default.cfg, assume that the paths are
// busted and error out now, rather than getting an unreadable
// graphics screen when the font fails to load
if ( FS_ReadFile( "mpdefault.cfg", NULL ) <= 0 ) {
Com_Error( ERR_FATAL, "Couldn't load mpdefault.cfg" );
// bk001208 - SafeMode see below, FIXME?
}
Q_strncpyz(lastValidBase, fs_basepath->string, sizeof(lastValidBase));
Q_strncpyz(lastValidGame, fs_gamedirvar->string, sizeof(lastValidGame));
// bk001208 - SafeMode see below, FIXME?
}
/*
=================
Com_InitJournaling
=================
*/
void Com_InitJournaling( void ) {
Com_StartupVariable( "journal" );
com_journal = Cvar_Get ("journal", "0", CVAR_INIT);
if ( !com_journal->integer ) {
return;
}
if ( com_journal->integer == 1 ) {
Com_Printf( "Journaling events\n");
com_journalFile = FS_FOpenFileWrite( "journal.dat" );
com_journalDataFile = FS_FOpenFileWrite( "journaldata.dat" );
} else if ( com_journal->integer == 2 ) {
Com_Printf( "Replaying journaled events\n");
FS_FOpenFileRead( "journal.dat", &com_journalFile, qtrue );
FS_FOpenFileRead( "journaldata.dat", &com_journalDataFile, qtrue );
}
if ( !com_journalFile || !com_journalDataFile ) {
Cvar_Set( "com_journal", "0" );
com_journalFile = 0;
com_journalDataFile = 0;
Com_Printf( "Couldn't open journal files\n" );
}
}
/*
================
FS_InitFilesystem
Called only at inital startup, not when the filesystem
is resetting due to a game change
================
*/
void FS_InitFilesystem( void ) {
#ifdef USE_AIO
struct aioinit init;
memset( &init, 0, sizeof( init ) );
init.aio_threads = 20;
init.aio_num = 64;
init.aio_idle_time = 300;
aio_init( &init );
Com_Printf( "Initialized AIO\n" );
#endif
// allow command line parms to override our defaults
// we have to specially handle this, because normal command
// line variable sets don't happen until after the filesystem
// has already been initialized
Com_StartupVariable( "fs_cdpath" );
Com_StartupVariable( "fs_basepath" );
Com_StartupVariable( "fs_homepath" );
Com_StartupVariable( "fs_game" );
Com_StartupVariable( "fs_copyfiles" );
Com_StartupVariable( "fs_dirbeforepak" );
Com_StartupVariable( "fs_extragames" );
#ifdef MACOS_X
Com_StartupVariable( "fs_apppath" );
#endif
if(!FS_FilenameCompare(Cvar_VariableString("fs_game"), BASEGAME))
Cvar_Set("fs_game", "");
// try to start up normally
FS_Startup( BASEGAME );
initialized = qtrue;
// if we can't find default.cfg, assume that the paths are
// busted and error out now, rather than getting an unreadable
// graphics screen when the font fails to load
if ( FS_ReadFile( "mpdefault.cfg", NULL ) <= 0 ) {
Com_Error( ERR_FATAL, "Couldn't load mpdefault.cfg" );
// bk001208 - SafeMode see below, FIXME?
}
Q_strncpyz(lastValidBase, fs_basepath->string, sizeof(lastValidBase));
Q_strncpyz(lastValidGame, fs_gamedirvar->string, sizeof(lastValidGame));
// bk001208 - SafeMode see below, FIXME?
}
void Com_Init( char *commandLine ) {
char *s;
Com_Printf( "%s %s %s\n", Q3_VERSION, PLATFORM_STRING, __DATE__ );
try {
Cvar_Init ();
// prepare enough of the subsystems to handle
// cvar and command buffer management
Com_ParseCommandLine( commandLine );
//Swap_Init ();
Cbuf_Init ();
Com_InitZoneMemory();
Cmd_Init ();
// override anything from the config files with command line args
Com_StartupVariable( NULL );
// done early so bind command exists
CL_InitKeyCommands();
com_homepath = Cvar_Get("com_homepath", "", CVAR_INIT);
FS_InitFilesystem (); //uses z_malloc
//re.R_InitWorldEffects(); // this doesn't do much but I want to be sure certain variables are intialized.
Com_ExecuteCfg();
// override anything from the config files with command line args
Com_StartupVariable( NULL );
// allocate the stack based hunk allocator
Com_InitHunkMemory();
// if any archived cvars are modified after this, we will trigger a writing
// of the config file
cvar_modifiedFlags &= ~CVAR_ARCHIVE;
//
// init commands and vars
//
Cmd_AddCommand ("quit", Com_Quit_f);
Cmd_AddCommand ("writeconfig", Com_WriteConfig_f );
com_maxfps = Cvar_Get ("com_maxfps", "125", CVAR_ARCHIVE);
com_developer = Cvar_Get ("developer", "0", CVAR_TEMP );
com_logfile = Cvar_Get ("logfile", "0", CVAR_TEMP );
com_speedslog = Cvar_Get ("speedslog", "0", CVAR_TEMP );
com_timescale = Cvar_Get ("timescale", "1", CVAR_CHEAT );
com_fixedtime = Cvar_Get ("fixedtime", "0", CVAR_CHEAT);
com_showtrace = Cvar_Get ("com_showtrace", "0", CVAR_CHEAT);
com_speeds = Cvar_Get ("com_speeds", "0", 0);
#ifdef G2_PERFORMANCE_ANALYSIS
com_G2Report = Cvar_Get("com_G2Report", "0", 0);
#endif
cl_paused = Cvar_Get ("cl_paused", "0", CVAR_ROM);
sv_paused = Cvar_Get ("sv_paused", "0", CVAR_ROM);
com_sv_running = Cvar_Get ("sv_running", "0", CVAR_ROM);
com_cl_running = Cvar_Get ("cl_running", "0", CVAR_ROM);
com_skippingcin = Cvar_Get ("skippingCinematic", "0", CVAR_ROM);
com_buildScript = Cvar_Get( "com_buildScript", "0", 0 );
com_affinity = Cvar_Get( "com_affinity", "1", CVAR_ARCHIVE );
com_bootlogo = Cvar_Get( "com_bootlogo", "1", CVAR_ARCHIVE );
if ( com_developer && com_developer->integer ) {
Cmd_AddCommand ("error", Com_Error_f);
Cmd_AddCommand ("crash", Com_Crash_f );
Cmd_AddCommand ("freeze", Com_Freeze_f);
}
s = va("%s %s %s", Q3_VERSION, PLATFORM_STRING, __DATE__ );
com_version = Cvar_Get ("version", s, CVAR_ROM | CVAR_SERVERINFO );
#ifdef JK2_MODE
JK2SP_Init();
Com_Printf("Running Jedi Outcast Mode\n");
#else
SE_Init(); // Initialize StringEd
Com_Printf("Running Jedi Academy Mode\n");
#endif
Sys_Init(); // this also detects CPU type, so I can now do this CPU check below...
Sys_SetProcessorAffinity();
Netchan_Init( Com_Milliseconds() & 0xffff ); // pick a port value that should be nice and random
// VM_Init();
SV_Init();
CL_Init();
// set com_frameTime so that if a map is started on the
// command line it will still be able to count on com_frameTime
// being random enough for a serverid
com_frameTime = Com_Milliseconds();
// add + commands from command line
if ( !Com_AddStartupCommands() ) {
// if the user didn't give any commands, run default action
if ( com_bootlogo->integer )
{
Cbuf_AddText ("cinematic openinglogos\n");
}
}
com_fullyInitialized = qtrue;
Com_Printf ("--- Common Initialization Complete ---\n");
//HACKERY FOR THE DEUTSCH
//if ( (Cvar_VariableIntegerValue("ui_iscensored") == 1) //if this was on before, set it again so it gets its flags
// )
//{
// Cvar_Get( "ui_iscensored", "1", CVAR_ARCHIVE|CVAR_ROM|CVAR_INIT|CVAR_CHEAT|CVAR_NORESTART);
// Cvar_Set( "ui_iscensored", "1"); //just in case it was archived
// // NOTE : I also create this in UI_Init()
// Cvar_Get( "g_dismemberment", "0", CVAR_ARCHIVE|CVAR_ROM|CVAR_INIT|CVAR_CHEAT);
// Cvar_Set( "g_dismemberment", "0"); //just in case it was archived
//}
}
catch ( int code )
{
Com_CatchError (code);
Sys_Error ("Error during initialization %s", Com_ErrorString (code));
}
}
/*
=================
Com_Init
=================
*/
void Com_Init( char *commandLine ) {
char *s;
Com_Printf( "%s %s %s\n", Q3_VERSION, CPUSTRING, __DATE__ );
try {
// prepare enough of the subsystems to handle
// cvar and command buffer management
Com_ParseCommandLine( commandLine );
Swap_Init ();
Cbuf_Init ();
Com_InitZoneMemory();
Cmd_Init ();
Cvar_Init ();
// get the commandline cvars set
Com_StartupVariable( NULL );
// done early so bind command exists
CL_InitKeyCommands();
FS_InitFilesystem (); //uses z_malloc
Com_InitJournaling();
Cbuf_AddText ("exec default.cfg\n");
// skip the jk2config.cfg if "safe" is on the command line
if ( !Com_SafeMode() ) {
Cbuf_AddText ("exec jk2config.cfg\n");
}
Cbuf_AddText ("exec autoexec.cfg\n");
Cbuf_Execute ();
// override anything from the config files with command line args
Com_StartupVariable( NULL );
// allocate the stack based hunk allocator
Com_InitHunkMemory();
// if any archived cvars are modified after this, we will trigger a writing
// of the config file
cvar_modifiedFlags &= ~CVAR_ARCHIVE;
//
// init commands and vars
//
Cmd_AddCommand ("quit", Com_Quit_f);
Cmd_AddCommand ("writeconfig", Com_WriteConfig_f );
com_maxfps = Cvar_Get ("com_maxfps", "85", CVAR_ARCHIVE);
com_developer = Cvar_Get ("developer", "0", CVAR_TEMP );
com_logfile = Cvar_Get ("logfile", "0", CVAR_TEMP );
com_speedslog = Cvar_Get ("speedslog", "0", CVAR_TEMP );
com_timescale = Cvar_Get ("timescale", "1", CVAR_CHEAT );
com_fixedtime = Cvar_Get ("fixedtime", "0", CVAR_CHEAT);
com_showtrace = Cvar_Get ("com_showtrace", "0", CVAR_CHEAT);
com_viewlog = Cvar_Get( "viewlog", "0", CVAR_TEMP );
com_speeds = Cvar_Get ("com_speeds", "0", 0);
cl_paused = Cvar_Get ("cl_paused", "0", CVAR_ROM);
sv_paused = Cvar_Get ("sv_paused", "0", CVAR_ROM);
com_sv_running = Cvar_Get ("sv_running", "0", CVAR_ROM);
com_cl_running = Cvar_Get ("cl_running", "0", CVAR_ROM);
com_skippingcin = Cvar_Get ("skippingCinematic", "0", CVAR_ROM);
com_buildScript = Cvar_Get( "com_buildScript", "0", 0 );
com_FirstTime = Cvar_Get( "com_FirstTime", "0", CVAR_ARCHIVE);
if ( com_developer && com_developer->integer ) {
Cmd_AddCommand ("error", Com_Error_f);
Cmd_AddCommand ("crash", Com_Crash_f );
Cmd_AddCommand ("freeze", Com_Freeze_f);
}
s = va("%s %s %s", Q3_VERSION, CPUSTRING, __DATE__ );
com_version = Cvar_Get ("version", s, CVAR_ROM | CVAR_SERVERINFO );
SP_Init(); // Initialize StripEd
Sys_Init(); // this also detects CPU type, so I can now do this CPU check below...
if( !com_FirstTime->integer ) // special request to detect and use top-settings for Intel Williamette chip...
{
Cvar_Set( "com_FirstTime", "1" ); // only do this once
//
// ( make a local ptr only for quick test, since this is a common module )
//
cvar_t* s_CPUType = Cvar_Get("sys_cpuid","",0);
if (s_CPUType->value == CPUID_INTEL_WILLIAMETTE)
{
Cbuf_AddText ("exec perfect.cfg\n");
// Cbuf_Execute ();
}
}
Netchan_Init( Com_Milliseconds() & 0xffff ); // pick a port value that should be nice and random
// VM_Init();
SV_Init();
CL_Init();
Sys_ShowConsole( com_viewlog->integer, qfalse );
// set com_frameTime so that if a map is started on the
// command line it will still be able to count on com_frameTime
// being random enough for a serverid
com_frameTime = Com_Milliseconds();
// add + commands from command line
if ( !Com_AddStartupCommands() ) {
#ifdef NDEBUG
// if the user didn't give any commands, run default action
// if ( !com_dedicated->integer )
{
Cbuf_AddText ("cinematic openinglogos\n");
// if( !com_introPlayed->integer ) {
// Cvar_Set( com_introPlayed->name, "1" );
// Cvar_Set( "nextmap", "cinematic intro" );
// }
}
#endif
}
com_fullyInitialized = qtrue;
Com_Printf ("--- Common Initialization Complete ---\n");
}
catch (const char* reason) {
Sys_Error ("Error during initialization %s", reason);
}
}
