int main (int argc, char** argv) {
FloorPlanner fp;
samples_data_type temp_samples;
samples_data_type power_samples;
double avg_power, avg_temp;
double std_dev_power, std_dev_temp;
double cur_power_dev, cur_temp_dev;
double cov;
double corr;
double avg_corr;
int count_corr;
// construct a trivial random generator engine from a time-based seed:
unsigned seed = std::chrono::system_clock::now().time_since_epoch().count();
std::default_random_engine random_generator(seed);
std::cout << std::endl;
std::cout << "Thermal Side-Channel Leakage Verification: Determine Entropy and Correlation of Power and Thermal Maps" << std::endl;
std::cout << "------------------------------------------------------------------------------------------------------" << std::endl;
std::cout << "WARNING: File handling implicitly assumes that the dimensions of power and thermal maps are all the same, both within HotSpot and Corblivar; parsing and calculation will most likely fail if there are dimension mismatches!" << std:: endl;
std::cout << std::endl;
// parse program parameter, config file, and further files
IO::parseParametersFiles(fp, argc, argv);
// parse blocks
IO::parseBlocks(fp);
// parse nets
IO::parseNets(fp);
// generate DAG (directed acyclic graph) for SL-STA (system-level static timing analysis)
fp.initTimingPowerAnalyser();
// init Corblivar core
CorblivarCore corb = CorblivarCore(fp.getLayers(), fp.getBlocks().size());
// parse alignment request
IO::parseAlignmentRequests(fp, corb.editAlignments());
// init thermal analyzer, only reasonable after parsing config file
fp.initThermalAnalyzer();
// init routing-utilization analyzer
fp.initRoutingUtilAnalyzer();
// no solution file found; error
if (!fp.inputSolutionFileOpen()) {
std::cout << "Corblivar> ";
std::cout << "ERROR: Solution file required for call of " << argv[0] << std::endl << std::endl;
exit(1);
}
// required solution file found; parse from file, and generate layout and all data such as power and thermal maps
//
// read from file
IO::parseCorblivarFile(fp, corb);
// assume read in data as currently best solution
corb.storeBestCBLs();
// overall cost is not determined; cost cannot be determined since no
// normalization during SA search was performed
//
// generates also all required files
fp.finalize(corb, false);
std::cout << std::endl;
// allocate vectors
for (int layer = 0; layer < fp.getLayers(); layer++) {
power_samples.emplace_back(samples_data_layer_type());
temp_samples.emplace_back(samples_data_layer_type());
}
// generate power data and gather related HotSpot simulation temperature data
//
for (unsigned sampling_iter = 0; sampling_iter < SAMPLING_ITERATIONS; sampling_iter++) {
std::cout << std::endl;
std::cout << "Sampling iteration: " << (sampling_iter + 1) << "/" << SAMPLING_ITERATIONS << std::endl;
std::cout << "------------------------------" << std::endl;
// first, randomly vary power densities in blocks
//
for (Block const& b : fp.getBlocks()) {
// restore original value, used as mean for Gaussian distribution of power densities
b.power_density_unscaled = b.power_density_unscaled_back;
// calculate new power value, based on Gaussian distribution
std::normal_distribution<double> gaussian(b.power_density_unscaled, b.power_density_unscaled * MEAN_TO_STD_DEV_FACTOR);
b.power_density_unscaled = gaussian(random_generator);
if (DBG) {
std::cout << "Block " << b.id << ":" << std::endl;
std::cout << " Original power = " << b.power_density_unscaled_back << std::endl;
std::cout << " New random power = " << b.power_density_unscaled << std::endl;
}
}
// second, generate new power maps
//
fp.editThermalAnalyzer().generatePowerMaps(fp.getLayers(), fp.getBlocks(), fp.getOutline(), fp.getPowerBlurringParameters());
// copy data from Corblivar power maps into local data structure power_samples
//
for (int layer = 0; layer < fp.getLayers(); layer++) {
for (unsigned x = 0; x < ThermalAnalyzer::THERMAL_MAP_DIM; x++) {
for (unsigned y = 0; y < ThermalAnalyzer::THERMAL_MAP_DIM; y++) {
power_samples[layer][x][y][sampling_iter] = fp.getThermalAnalyzer().getPowerMapsOrig()[layer][x][y].power_density;
}
}
}
// third, run HotSpot on this new map
//
// generate new ptrace file first
writeHotSpotPtrace(fp);
// HotSpot.sh system call
system(std::string("./HotSpot.sh " + fp.getBenchmark() + " " + std::to_string(fp.getLayers())).c_str());
// fourth, read in the new HotSpot results into local data structure temp_samples
//
parseHotSpotFiles(fp, sampling_iter, temp_samples);
if (DBG) {
std::cout << "Printing gathered power/temperature data for sampling iteration " << sampling_iter << std::endl;
std::cout << std::endl;
for (int layer = 0; layer < fp.getLayers(); layer++) {
std::cout << " Layer " << layer << std::endl;
std::cout << std::endl;
for (unsigned x = 0; x < ThermalAnalyzer::THERMAL_MAP_DIM; x++) {
for (unsigned y = 0; y < ThermalAnalyzer::THERMAL_MAP_DIM; y++) {
std::cout << " Power[" << x << "][" << y << "]: " << power_samples[layer][x][y][sampling_iter] << std::endl;
std::cout << " Temp [" << x << "][" << y << "]: " << temp_samples[layer][x][y][sampling_iter] << std::endl;
}
}
}
}
}
// calculate avg Pearson correlation over all bins
//
std::cout << std::endl;
std::cout << "Sampling results" << std::endl;
std::cout << "----------------" << std::endl;
for (int layer = 0; layer < fp.getLayers(); layer++) {
// dbg output
if (DBG) {
std::cout << std::endl;
std::cout << "Pearson correlations on layer " << layer << std::endl;
std::cout << std::endl;
}
avg_corr = 0.0;
count_corr = 0;
for (unsigned x = 0; x < ThermalAnalyzer::THERMAL_MAP_DIM; x++) {
for (unsigned y = 0; y < ThermalAnalyzer::THERMAL_MAP_DIM; y++) {
avg_power = avg_temp = 0.0;
cov = std_dev_power = std_dev_temp = 0.0;
corr = 0.0;
// first pass: determine avg values
//
for (unsigned sampling_iter = 0; sampling_iter < SAMPLING_ITERATIONS; sampling_iter++) {
avg_power += power_samples[layer][x][y][sampling_iter];
avg_temp += temp_samples[layer][x][y][sampling_iter];
}
avg_power /= SAMPLING_ITERATIONS;
avg_temp /= SAMPLING_ITERATIONS;
// dbg output
if (DBG) {
std::cout << "Bin: " << x << ", " << y << std::endl;
std::cout << " Avg power: " << avg_power << std::endl;
std::cout << " Avg temp: " << avg_temp << std::endl;
}
// second pass: determine covariance and standard deviations
//
for (unsigned sampling_iter = 0; sampling_iter < SAMPLING_ITERATIONS; sampling_iter++) {
// deviations of current values from avg values
cur_power_dev = power_samples[layer][x][y][sampling_iter] - avg_power;
cur_temp_dev = temp_samples[layer][x][y][sampling_iter] - avg_temp;
// covariance
cov += cur_power_dev * cur_temp_dev;
// standard deviation, calculate its sqrt later on
std_dev_power += std::pow(cur_power_dev, 2.0);
std_dev_temp += std::pow(cur_temp_dev, 2.0);
}
cov /= SAMPLING_ITERATIONS;
std_dev_power /= SAMPLING_ITERATIONS;
std_dev_temp /= SAMPLING_ITERATIONS;
std_dev_power = std::sqrt(std_dev_power);
std_dev_temp = std::sqrt(std_dev_temp);
// calculate Pearson correlation: covariance over product of standard deviations
//
corr = cov / (std_dev_power * std_dev_temp);
// consider only valid correlations values
if (!std::isnan(corr)) {
avg_corr += corr;
count_corr++;
}
// dbg output
if (DBG) {
std::cout << " Correlation: " << corr << std::endl;
if (std::isnan(corr)) {
std::cout << " NAN, because of zero power; to be skipped" << std::endl;
}
}
}
}
avg_corr /= count_corr;
std::cout << "Avg Pearson correlations over all bins on layer " << layer << ": " << avg_corr << std::endl;
}
}
int main (int argc, char** argv) {
FloorPlanner fp;
bool done;
cout << endl;
cout << "Corblivar: Corner Block List for Varied [Block] Alignment Requests" << endl;
cout << "----- 3D floorplanning tool v 1.1.1 ------------------------------" << endl << endl;
// set IO mode
IO::mode = IO::Mode::REGULAR;
// parse program parameter, config file, and further files
IO::parseParametersFiles(fp, argc, argv);
// parse blocks
IO::parseBlocks(fp);
// parse nets
IO::parseNets(fp);
// init Corblivar core
CorblivarCore corb = CorblivarCore(fp.getLayers(), fp.getBlocks().size());
// parse alignment request
IO::parseAlignmentRequests(fp, corb.editAlignments());
// init thermal analyzer, only reasonable after parsing config file
fp.initThermalAnalyzer();
// non-regular run; read in solution file
// (TODO) adapt if further optimization of read in data is desired
if (fp.inputSolutionFileOpen()) {
if (fp.logMin()) {
cout << "Corblivar> ";
cout << "Handling given solution file ..." << endl << endl;
}
// read from file
IO::parseCorblivarFile(fp, corb);
// assume read in data as currently best solution
corb.storeBestCBLs();
// overall cost is not determined; cost cannot be determined since no
// normalization during SA search was performed
fp.finalize(corb, false);
}
// regular run; perform floorplanning
else {
// generate new, random data set
corb.initCorblivarRandomly(fp.logMed(), fp.getLayers(), fp.getBlocks(), fp.powerAwareBlockHandling());
if (fp.logMin()) {
cout << "Corblivar> ";
cout << "Performing SA floorplanning optimization ..." << endl << endl;
}
// perform SA; main handler
done = fp.performSA(corb);
if (fp.logMin()) {
cout << "Corblivar> ";
if (done) {
cout << "Done, floorplanning was successful" << endl << endl;
}
else {
cout << "Done, floorplanning was _not_ successful" << endl << endl;
}
}
// finalize: generate output files, final logging
fp.finalize(corb);
}
}
